Ubuntu-fr

Don

Double ecran avec Dell 410, i915 et D/DOCK

Bonjour à tous,

Ayant eu pass mal de problèmes avec ma dernière version d'ubuntu, j'ai choisi de tester Feisty. Alors, j'ai pas eu de gros soucis d'install, tout s'est bien fait tout seul et j'ai réellement apprécié knetwork manager, qui sait faire du wpa/tkip comme un grand !
Pour les softs, je peux confirmer que l'install et l'utilisation du client vpn cisco est sans soucis majeur (modulo que cisco n'est jamais à jour sur les noyaux donc il faut patcher les sources du client). Vmware server s'installe également sans problème. Et depuis une mise à jour récente, le client des KVM IP Dell (Dell Remote Console Switch) marche aussi (auparavant, j'avais des problèmes de libs).
Enfin, après la partie success story, voilà le seul truc qui ne fonctionne pas : le double écran !
J'ai comme config un portable dell 410 pluggé sur une D/DOCK à laquelle j'ai connecté 2 Dell 1905 (19''), le primaire en DVI, l'autre en VGA.
Sans doute par , je me suis dit que j'allais essayer la configuration par l'intermédiaire des réglages système, à la manière de windows, conforté dans mon idée en trouvant l'option deuxième écran.
Mais il semblerait que le fichier X11 généré ne soit pas bon, donc, le serveur X ne redémarre pas. J'avais déjà eu ce probleme sur 6.10, quel est le meilleur moyen de faire un rapport de bug ?

snifer

Re : Double ecran avec Dell 410, i915 et D/DOCK

salut pourrais tu poster ton fichier xorg.conf stp
merci d'avance
@+

Don

Re : Double ecran avec Dell 410, i915 et D/DOCK

Le voilà tel que généré par l'utilitaire de configuration.

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/fonts/X11/misc"
  FontPath "/usr/share/fonts/X11/cyrillic"
  FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/Type1"
  FontPath "/usr/share/fonts/X11/100dpi"
  FontPath "/usr/share/fonts/X11/75dpi"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "vbe"
  load "glx"
  load "GLcore"
  load "dri"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "fr"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ImPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Identifier "Synaptics Touchpad"
  Driver "synaptics"
  option "SendCoreEvents" "true"
  option "Device" "/dev/psaux"
  option "Protocol" "auto-dev"
  option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "Carte vidéo générique"
  boardname "Intel 915"
  busid "PCI:0:2:0"
  driver "i810"
  screen 0
  vendorname "Intel"
EndSection

Section "Monitor"
  identifier "Écran générique"
  vendorname "Dell"
  modelname "Dell 1905FP (Analog)"
  HorizSync 30.0-81.0
  VertRefresh 56.0-76.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "Carte vidéo générique"
  Monitor "Écran générique"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x1024@60" "1024x768@60" "1280x960@75" "1024x768@70" "1400x1050@60" "1024x768@75" "1600x1200@65" ""
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  screen 1 "screen1" rightof "Default Screen"
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
  InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #
  identifier "device1"
  boardname "Intel 915"
  busid "PCI:0:2:0"
  driver "i810"
  screen 1
  vendorname "Intel"
EndSection
Section "screen" #
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "1280x1024@60" "1280x960@75" "1280x960@60" "1400x1050@60" "1280x1024@75" "1600x1200@65" "1152x864@75" "1600x1200@60" "1024x768@60" "1024x768@70" "
  EndSubSection
EndSection
Section "monitor" #
  identifier "monitor1"
  vendorname "Dell"
  modelname "Dell 1905FP (Analog)"
  HorizSync 30.0-81.0
  VertRefresh 56.0-76.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  gamma 1.0
EndSection
Section "ServerFlags"
  option "Xinerama" "true"
EndSection