Pages : 1
#1 Le 17/01/2016, à 18:15
- vlotho
pilote propriétaire NVIDIA powerpc
Bonjour,
Suite à l'installation d'une ubuntu 14.04.3 sur un Power Mac G5 Quad, je tombe sur un écran noir lors du lancement de l'interface graphique. J'ai lu pas mal de choses et il s’avérerait qu'il y ai des problèmes avec les carte nvidia geforce 7800 gt et le pilote nouveau.
Je ne sais pas comment résoudre le problème.
Le dmesg m'affiche ceci :
[ 0.000000] Allocated 2097152 bytes for 1024 pacas at c00000000fe00000
[ 0.000000] DART table allocated at: c00000007f000000
[ 0.000000] Using PowerMac machine description
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
[ 0.000000] Found initrd at 0xc000000002600000:0xc000000003e19000
[ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
[ 0.000000] Mapped at 0xd000080080000000
[ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000
[ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core
[ 0.000000] DART IOMMU initialized for U4 type chipset
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Freed 2088960 bytes for unused pacas
[ 0.000000] Starting Linux PPC64 #118-Ubuntu SMP Thu Dec 17 23:07:20 UTC 2015
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] physicalMemorySize = 0x100000000
[ 0.000000] htab_address = 0xc00000017c000000
[ 0.000000] htab_hash_mask = 0x7ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-74-powerpc64-smp (buildd@fisher04) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #118-Ubuntu SMP Thu Dec 17 23:07:20 UTC 2015 (Ubuntu 3.13.0-74.118-powerpc64-smp 3.13.11-ckt30)
[ 0.000000] [boot]0012 Setup Arch
[ 0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255
[ 0.000000] PCI host bridge /pci@0,f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
[ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=414, gen1=415
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x17fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x7fffffff]
[ 0.000000] node 0: [mem 0x100000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] DMA zone: 14336 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 1048576 pages, LIFO batch:31
[ 0.000000] [boot]0015 Setup Done
[ 0.000000] PERCPU: Embedded 17 pages/cpu @c000000004000000 s38784 r0 d30848 u262144
[ 0.000000] pcpu-alloc: s38784 r0 d30848 u262144 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034240
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=UUID=c5c7317d-3e9e-462c-ae70-2eb134f1a34f ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 3913004K/4194304K available (9864K kernel code, 2008K rwdata, 3748K rodata, 7600K init, 2614K bss, 281300K reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 124 sources
[ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4
[ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
[ 0.000000] time_init: decrementer frequency = 33.333333 MHz
[ 0.000000] time_init: processor frequency = 2500.000000 MHz
[ 0.000000] clocksource: timebase mult[1e000005] shift[24] registered
[ 0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [udbg0] disabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.004668] pid_max: default: 32768 minimum: 301
[ 0.004711] Security Framework initialized
[ 0.004742] AppArmor: AppArmor initialized
[ 0.004744] Yama: becoming mindful.
[ 0.005399] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008805] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010381] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010395] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012411] device-tree: Duplicate name in /ht@0,f2000000/pci@8/mac-io@7/i2c@18000, renamed to "i2c-bus@0#1"
[ 0.014125] Initializing cgroup subsys memory
[ 0.014505] Initializing cgroup subsys devices
[ 0.014509] Initializing cgroup subsys freezer
[ 0.014514] Initializing cgroup subsys blkio
[ 0.014517] Initializing cgroup subsys perf_event
[ 0.014522] Initializing cgroup subsys hugetlb
[ 0.014559] ftrace: allocating 26250 entries in 155 pages
[ 0.032748] PowerMac SMP probe found 4 cpus
[ 0.032848] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
[ 0.032853] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
[ 0.032892] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
[ 0.032897] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[ 0.032901] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[ 0.032927] SMU i2c /smu@0,0/smu-i2c-control@0
[ 0.032934] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
[ 0.032938] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
[ 0.032954] Processor timebase sync using platform function
[ 0.032957] mpic: requesting IPIs...
[ 0.032994] PPC970/FX/MP performance monitor hardware support registered
[ 0.040248] Brought up 4 CPUs
[ 0.043519] devtmpfs: initialized
[ 0.084950] EVM: security.selinux
[ 0.084955] EVM: security.SMACK64
[ 0.084957] EVM: security.capability
[ 0.085150] EEH: devices created
[ 0.087172] regulator-dummy: no parameters
[ 0.087361] NET: Registered protocol family 16
[ 0.087378] eeh_init: Platform EEH operation not found
[ 0.087699] cpuidle: using governor ladder
[ 0.087701] cpuidle: using governor menu
[ 0.087765] CPU Hotplug not supported by firmware - disabling.
[ 0.094285] PCI: Probing PCI hardware
[ 0.094410] PCI host bridge to bus 0000:00
[ 0.094418] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
[ 0.094421] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.094425] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.094429] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.094435] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.094469] pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400
[ 0.094501] PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0xafffffff]
[ 0.094535] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.128845] IOMMU table initialized, virtual merging enabled
[ 0.128913] pci 0000:0a:00.0: [10de:0092] type 00 class 0x030000
[ 0.128928] pci 0000:0a:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff]
[ 0.128941] pci 0000:0a:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.128955] pci 0000:0a:00.0: reg 0x1c: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.128964] pci 0000:0a:00.0: reg 0x24: [io 0x10000-0x1007f]
[ 0.128974] pci 0000:0a:00.0: reg 0x30: [mem 0xa2000000-0xa201ffff pref]
[ 0.129066] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.129076] pci 0000:00:0b.0: PCI bridge to [bus 0a]
[ 0.129083] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff]
[ 0.129088] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff]
[ 0.129095] pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.129142] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a
[ 0.129206] PCI host bridge to bus 0001:00
[ 0.129211] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff])
[ 0.129215] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff]
[ 0.129218] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.129221] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xefffffff]
[ 0.129224] pci_bus 0001:00: root bus resource [bus 00-ef]
[ 0.129229] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff
[ 0.129245] pci 0001:00:00.0: [106b:0074] type 00 class 0x060000
[ 0.129314] pci 0001:00:01.0: [1166:0130] type 01 class 0x060400
[ 0.129408] pci 0001:00:02.0: [1166:0130] type 01 class 0x060400
[ 0.129495] pci 0001:00:03.0: [1166:0132] type 01 class 0x060400
[ 0.129582] pci 0001:00:04.0: [1166:0132] type 01 class 0x060400
[ 0.129665] pci 0001:00:05.0: [1166:0132] type 01 class 0x060400
[ 0.129751] pci 0001:00:06.0: [1166:0132] type 01 class 0x060400
[ 0.129839] pci 0001:00:07.0: [106b:0053] type 01 class 0x060400
[ 0.129948] pci 0001:00:08.0: [106b:0054] type 01 class 0x060400
[ 0.130043] pci 0001:00:09.0: [106b:0055] type 01 class 0x060400
[ 0.130210] pci 0001:00:01.0: PCI bridge to [bus 04]
[ 0.130269] pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000
[ 0.130284] pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit]
[ 0.130294] pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit]
[ 0.130342] pci 0001:05:04.0: PME# supported from D3hot D3cold
[ 0.130406] pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000
[ 0.130421] pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit]
[ 0.130431] pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit]
[ 0.130479] pci 0001:05:04.1: PME# supported from D3hot D3cold
[ 0.130541] pci 0001:00:02.0: PCI bridge to [bus 05]
[ 0.130549] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.130622] pci 0001:00:03.0: PCI bridge to [bus 06]
[ 0.130670] pci 0001:00:04.0: PCI bridge to [bus 07]
[ 0.130720] pci 0001:00:05.0: PCI bridge to [bus 08]
[ 0.130767] pci 0001:00:06.0: PCI bridge to [bus 09]
[ 0.130832] pci 0001:00:07.0: PCI bridge to [bus 02]
[ 0.130840] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff]
[ 0.130846] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 0.130896] pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000
[ 0.130907] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.131005] pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310
[ 0.131020] pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff]
[ 0.131074] pci 0001:01:0b.0: supports D1 D2
[ 0.131077] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131154] pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310
[ 0.131169] pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.131223] pci 0001:01:0b.1: supports D1 D2
[ 0.131226] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131293] pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.131308] pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff]
[ 0.131361] pci 0001:01:0b.2: supports D1 D2
[ 0.131365] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131422] pci 0001:00:08.0: PCI bridge to [bus 01]
[ 0.131432] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.131437] pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 0.131527] pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f
[ 0.131538] pci 0001:03:0c.0: reg 0x10: [io 0x811000-0x811007]
[ 0.131546] pci 0001:03:0c.0: reg 0x14: [io 0x811000-0x811003]
[ 0.131554] pci 0001:03:0c.0: reg 0x18: [io 0x811000-0x811007]
[ 0.131561] pci 0001:03:0c.0: reg 0x1c: [io 0x811000-0x811003]
[ 0.131569] pci 0001:03:0c.0: reg 0x20: [io 0x811000-0x81100f]
[ 0.131577] pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff]
[ 0.131645] pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000
[ 0.131654] pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff]
[ 0.131734] pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010
[ 0.131748] pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff]
[ 0.131797] pci 0001:03:0e.0: supports D1 D2
[ 0.131800] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.131855] pci 0001:00:09.0: PCI bridge to [bus 03]
[ 0.131864] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.131869] pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 0.131929] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.132023] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.132039] pci 0000:00:0b.0: BAR 15: assigned [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.132044] pci 0000:0a:00.0: BAR 5: assigned [io 0x10000-0x1007f]
[ 0.132049] pci 0000:00:0b.0: PCI bridge to [bus 0a]
[ 0.132053] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff]
[ 0.132059] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff]
[ 0.132064] pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.132070] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff]
[ 0.132074] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.132077] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.132080] pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff]
[ 0.132083] pci_bus 0000:0a: resource 1 [mem 0x90000000-0xafffffff]
[ 0.132087] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.132127] pci 0001:00:01.0: PCI bridge to [bus 04]
[ 0.132133] pci 0001:00:02.0: PCI bridge to [bus 05]
[ 0.132138] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.132143] pci 0001:00:03.0: PCI bridge to [bus 06]
[ 0.132148] pci 0001:00:04.0: PCI bridge to [bus 07]
[ 0.132155] pci 0001:00:05.0: PCI bridge to [bus 08]
[ 0.132160] pci 0001:00:06.0: PCI bridge to [bus 09]
[ 0.132166] pci 0001:00:07.0: PCI bridge to [bus 02]
[ 0.132170] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff]
[ 0.132176] pci 0001:00:08.0: PCI bridge to [bus 01]
[ 0.132180] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.132186] pci 0001:00:09.0: PCI bridge to [bus 03]
[ 0.132190] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.132196] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff]
[ 0.132199] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
[ 0.132202] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.132205] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff]
[ 0.132209] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff]
[ 0.132213] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff]
[ 0.132216] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
[ 0.132219] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff]
[ 0.132222] PCI: Probing PCI hardware done
[ 0.135912] opal: Node not found
[ 0.135925] opal_async_comp_init: Opal node not found
[ 0.137621] bio: create slab <bio-0> at 0
[ 0.138143] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none
[ 0.138171] vgaarb: loaded
[ 0.138173] vgaarb: bridge control possible 0000:0a:00.0
[ 0.138500] SCSI subsystem initialized
[ 0.138581] libata version 3.00 loaded.
[ 0.138644] usbcore: registered new interface driver usbfs
[ 0.138660] usbcore: registered new interface driver hub
[ 0.138707] usbcore: registered new device driver usb
[ 0.139104] NetLabel: Initializing
[ 0.139106] NetLabel: domain hash size = 128
[ 0.139108] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.139128] NetLabel: unlabeled traffic allowed by default
[ 0.139266] Switched to clocksource timebase
[ 0.151877] AppArmor: AppArmor Filesystem Enabled
[ 0.153987] NET: Registered protocol family 2
[ 0.154344] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.154625] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.155248] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.155317] TCP: reno registered
[ 0.155338] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155400] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155584] NET: Registered protocol family 1
[ 0.155619] PCI: CLS mismatch (32 != 64), using 128 bytes
[ 0.155638] pci 0001:00:03.0: Found enabled HT MSI Mapping
[ 0.155647] pci 0001:00:04.0: Found enabled HT MSI Mapping
[ 0.155656] pci 0001:00:05.0: Found enabled HT MSI Mapping
[ 0.155664] pci 0001:00:06.0: Found enabled HT MSI Mapping
[ 0.155693] pci 0001:01:0b.0: enabling device (0000 -> 0002)
[ 0.211296] pci 0001:01:0b.1: enabling device (0000 -> 0002)
[ 0.267279] pci 0001:01:0b.2: enabling device (0004 -> 0006)
[ 0.267417] Trying to unpack rootfs image as initramfs...
[ 0.866587] Freeing initrd memory: 24676K (c000000002600000 - c000000003e19000)
[ 0.867405] Initialise system trusted keyring
[ 0.867489] audit: initializing netlink socket (disabled)
[ 0.867508] type=2000 audit(1453044328.855:1): initialized
[ 1.004133] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 1.005833] zbud: loaded
[ 1.006090] VFS: Disk quotas dquot_6.5.2
[ 1.006155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.006978] fuse init (API version 7.22)
[ 1.007095] msgmni has been set to 7821
[ 1.007204] Key type big_key registered
[ 1.007947] Key type asymmetric registered
[ 1.007950] Asymmetric key parser 'x509' registered
[ 1.008012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.008070] io scheduler noop registered
[ 1.008073] io scheduler deadline registered (default)
[ 1.008115] io scheduler cfq registered
[ 1.008395] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.008403] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.008583] Using unsupported 1680x1050 NVDA,Display-A at 90020000, depth=8, pitch=2048
[ 1.038999] Console: switching to colour frame buffer device 210x65
[ 1.068942] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0
[ 1.068978] Using unsupported 1280x1024 NVDA,Display-B at 92000000, depth=8, pitch=1536
[ 1.068996] checking generic (90020000 20d000) vs hw (92000000 180000)
[ 1.069056] fb1: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-B@1
[ 1.069086] ipmi message handler version 39.2
[ 1.069536] HVCS: Driver registered.
[ 1.069541] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.071373] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 1.071399] ePAPR hypervisor byte channel driver
[ 1.071526] Linux agpgart interface v0.103
[ 1.073593] brd: module loaded
[ 1.074638] loop: module loaded
[ 1.074802] MacIO PCI driver attached to Shasta chipset
[ 1.075164] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 1.075352] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 1.075661] sata_svw 0001:03:0c.0: version 2.3
[ 1.075716] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu
[ 1.076225] scsi0 : sata_svw
[ 1.076328] scsi1 : sata_svw
[ 1.076409] scsi2 : sata_svw
[ 1.076492] scsi3 : sata_svw
[ 1.076536] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18
[ 1.076540] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18
[ 1.076544] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18
[ 1.076548] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18
[ 1.076621] pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006)
[ 1.091286] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3
[ 1.091499] scsi4 : pata_macio
[ 1.091551] ata5: PATA max UDMA/133 irq 38
[ 1.092074] libphy: Fixed MDIO Bus: probed
[ 1.092267] tun: Universal TUN/TAP device driver, 1.6
[ 1.092269] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.092333] PPP generic driver version 2.4.2
[ 1.092405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092437] ehci-pci: EHCI PCI platform driver
[ 1.092505] ehci-pci 0001:01:0b.2: EHCI Host Controller
[ 1.092513] ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1
[ 1.092588] ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000
[ 1.103277] ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00
[ 1.103352] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.103356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.103359] usb usb1: Product: EHCI Host Controller
[ 1.103362] usb usb1: Manufacturer: Linux 3.13.0-74-powerpc64-smp ehci_hcd
[ 1.103365] usb usb1: SerialNumber: 0001:01:0b.2
[ 1.103532] hub 1-0:1.0: USB hub found
[ 1.103545] hub 1-0:1.0: 5 ports detected
[ 1.103738] ehci-platform: EHCI generic platform driver
[ 1.103757] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.103776] ohci-pci: OHCI PCI platform driver
[ 1.103805] ohci-pci 0001:01:0b.0: OHCI PCI host controller
[ 1.103812] ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2
[ 1.103833] ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000
[ 1.179127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.179130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.179133] usb usb2: Product: OHCI PCI host controller
[ 1.179136] usb usb2: Manufacturer: Linux 3.13.0-74-powerpc64-smp ohci_hcd
[ 1.179139] usb usb2: SerialNumber: 0001:01:0b.0
[ 1.179271] hub 2-0:1.0: USB hub found
[ 1.179285] hub 2-0:1.0: 3 ports detected
[ 1.179437] ohci-pci 0001:01:0b.1: OHCI PCI host controller
[ 1.179443] ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3
[ 1.179463] ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000
[ 1.255120] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.255124] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.255127] usb usb3: Product: OHCI PCI host controller
[ 1.255130] usb usb3: Manufacturer: Linux 3.13.0-74-powerpc64-smp ohci_hcd
[ 1.255133] usb usb3: SerialNumber: 0001:01:0b.1
[ 1.255273] hub 3-0:1.0: USB hub found
[ 1.255286] hub 3-0:1.0: 2 ports detected
[ 1.255405] ohci-platform: OHCI generic platform driver
[ 1.255423] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.255642] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66
[ 1.255730] mousedev: PS/2 mouse device common for all mice
[ 1.255878] PowerMac i2c bus smu 14 registered
[ 1.255922] PowerMac i2c bus smu 11 registered
[ 1.256099] PowerMac i2c bus mac-io 0 registered
[ 1.256183] PowerMac i2c bus mac-io 0 registered
[ 1.256307] PowerMac i2c bus u4 1 registered
[ 1.256565] device-mapper: uevent: version 1.0.3
[ 1.256718] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.271282] Registering G5 CPU frequency driver
[ 1.271285] Frequency method: SCOM, Voltage method: GPIO
[ 1.271287] Low: 1250 Mhz, High: 2500 Mhz, Cur: 2500 MHz
[ 1.271335] powernv-cpufreq: power-mgt node not found
[ 1.271337] powernv-cpufreq: powernv-cpufreq disabled. System does not support PState control
[ 1.271344] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.271522] TCP: cubic registered
[ 1.271588] ata5.00: configured for UDMA/66
[ 1.271670] NET: Registered protocol family 10
[ 1.271945] NET: Registered protocol family 17
[ 1.271962] Key type dns_resolver registered
[ 1.272013] PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff]
[ 1.272206] Loading compiled-in X.509 certificates
[ 1.273718] Loaded X.509 cert 'Magrathea: Glacier signing key: f287f438a8fae56369bb08052fa98841b27aec02'
[ 1.273739] registered taskstats version 1
[ 1.278108] Key type trusted registered
[ 1.285721] Key type encrypted registered
[ 1.285726] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.285973] regulator-dummy: disabling
[ 1.286068] /build/linux-FuiJM1/linux-3.13.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.395308] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.404529] ata1.00: ATA-7: Maxtor 6L250M0, BANC1GA0, max UDMA/133
[ 1.404535] ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
[ 1.420500] ata1.00: configured for UDMA/133
[ 1.420661] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250M0 BANC PQ: 0 ANSI: 5
[ 1.420868] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 1.420887] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.420941] sd 0:0:0:0: [sda] Write Protect is off
[ 1.420945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.420985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.441528] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 1.441999] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.750118] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.923275] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 2.138284] usb 3-2: New USB device found, idVendor=046d, idProduct=c00c
[ 2.138288] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.138291] usb 3-2: Product: USB Optical Mouse
[ 2.138294] usb 3-2: Manufacturer: Logitech
[ 2.571272] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 2.775279] ata3: failed to resume link (SControl 0)
[ 2.775305] ata3: SATA link down (SStatus 0 SControl 0)
[ 2.784276] usb 2-1: New USB device found, idVendor=05ac, idProduct=1002
[ 2.784280] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.784283] usb 2-1: Product: Hub in Apple Extended USB Keyboard
[ 2.784287] usb 2-1: Manufacturer: Mitsumi Electric
[ 2.787312] hub 2-1:1.0: USB hub found
[ 2.790274] hub 2-1:1.0: 3 ports detected
[ 3.091273] usb 2-1.1: new full-speed USB device number 3 using ohci-pci
[ 3.204273] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=0205
[ 3.204277] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3.204281] usb 2-1.1: Product: Apple Extended USB Keyboard
[ 3.204284] usb 2-1.1: Manufacturer: Mitsumi Electric
[ 3.803277] ata4: failed to resume link (SControl 0)
[ 3.803303] ata4: SATA link down (SStatus 0 SControl 0)
[ 3.806603] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B C006 PQ: 0 ANSI: 5
[ 3.806616] ata5.00: K2/Shasta alignment limits applied
[ 3.810580] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 3.810584] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.810733] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.810871] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.816862] Freeing unused kernel memory: 7600K (c000000000d53000 - c0000000014bf000)
[ 3.846149] systemd-udevd[128]: starting version 204
[ 3.872707] pps_core: LinuxPPS API ver. 1 registered
[ 3.872712] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.874863] PTP clock support registered
[ 3.882639] tg3.c:v3.134 (Sep 16, 2013)
[ 3.896015] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.900436] tg3 0001:05:04.0: Using 32-bit DMA via iommu
[ 3.900817] tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:64:60:cc
[ 3.900822] tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 3.900826] tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.900829] tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit]
[ 3.913706] tg3 0001:05:04.1: Using 32-bit DMA via iommu
[ 3.914092] tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:64:60:cd
[ 3.914097] tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 3.914101] tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.914105] tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit]
[ 3.917506] [drm] Initialized drm 1.1.0 20060810
[ 3.919453] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
[ 3.921853] usbcore: registered new interface driver usbhid
[ 3.921858] usbhid: USB HID core driver
[ 3.975347] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 3.978753] input: Logitech USB Optical Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.0/input/input0
[ 3.979387] hid-generic 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0001:01:0b.1-2/input0
[ 3.980823] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 3.981500] hid-generic 0003:05AC:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:01:0b.0-1.1/input0
[ 3.983078] checking generic (90020000 20d000) vs hw (90000000 10000000)
[ 3.983084] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver
[ 3.983113] Console: switching to colour dummy device 80x25
[ 3.983607] checking generic (92000000 180000) vs hw (90000000 10000000)
[ 3.983612] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver
[ 3.983968] windfarm: initializing for dual-core desktop G5
[ 3.984602] nouveau 0000:0a:00.0: enabling device (0006 -> 0007)
[ 3.984844] [drm] hdmi device not found 10 0 1
[ 3.984898] nouveau [ DEVICE][0000:0a:00.0] BOOT0 : 0x047200a1
[ 3.984901] nouveau [ DEVICE][0000:0a:00.0] Chipset: G70 (NV47)
[ 3.984904] nouveau [ DEVICE][0000:0a:00.0] Family : NV40
[ 3.985015] nouveau [ VBIOS][0000:0a:00.0] checking OpenFirmware for image...
[ 3.985040] nouveau [ VBIOS][0000:0a:00.0] ... checksum invalid
[ 3.985043] nouveau [ VBIOS][0000:0a:00.0] checking PRAMIN for image...
[ 3.985048] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 3.985051] nouveau [ VBIOS][0000:0a:00.0] checking PROM for image...
[ 3.985375] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
[ 3.986353] hid-generic 0003:05AC:0205.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:01:0b.0-1.1/input1
[ 4.093081] nouveau [ VBIOS][0000:0a:00.0] ... checksum invalid
[ 4.093085] nouveau [ VBIOS][0000:0a:00.0] checking ACPI for image...
[ 4.093092] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 4.093094] nouveau [ VBIOS][0000:0a:00.0] checking PCIROM for image...
[ 4.093149] nouveau 0000:0a:00.0: Invalid ROM contents
[ 4.093168] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 4.093172] nouveau [ VBIOS][0000:0a:00.0] checking PLATFORM for image...
[ 4.093176] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 4.093178] nouveau [ VBIOS][0000:0a:00.0] using image from OpenFirmware
[ 4.093217] nouveau [ VBIOS][0000:0a:00.0] BIT signature found
[ 4.093222] nouveau [ VBIOS][0000:0a:00.0] version 05.70.02.16.00
[ 4.093635] u3msi: allocated virq 0x19 (hw 0x8) addr 0xf8004080
[ 4.093652] nouveau [ PMC][0000:0a:00.0] MSI interrupts enabled
[ 4.093716] nouveau [ PFB][0000:0a:00.0] RAM type: GDDR3
[ 4.093719] nouveau [ PFB][0000:0a:00.0] RAM size: 256 MiB
[ 4.093722] nouveau [ PFB][0000:0a:00.0] ZCOMP: 294912 tags
[ 4.119167] nouveau [ VOLT][0000:0a:00.0] GPU voltage: 1200000uv
[ 4.144221] nouveau [ PTHERM][0000:0a:00.0] FAN control: PWM
[ 4.144250] nouveau [ PTHERM][0000:0a:00.0] fan management: automatic
[ 4.144255] nouveau [ PTHERM][0000:0a:00.0] internal sensor: yes
[ 4.164087] nouveau [ CLK][0000:0a:00.0] 20: core 275 MHz shader 275 MHz memory 1000 MHz
[ 4.164093] nouveau [ CLK][0000:0a:00.0] 21: core 375 MHz shader 400 MHz memory 1000 MHz
[ 4.164112] nouveau [ CLK][0000:0a:00.0] --: core 275 MHz shader 275 MHz memory 700 MHz
[ 4.164210] nouveau 0000:0a:00.0: Using 32-bit DMA via iommu
[ 4.164337] [TTM] Zone kernel: Available graphics memory: 2006126 kiB
[ 4.164343] [TTM] Initializing pool allocator
[ 4.164350] [TTM] Initializing DMA pool allocator
[ 4.164378] nouveau [ DRM] VRAM: 250 MiB
[ 4.164381] nouveau [ DRM] GART: 512 MiB
[ 4.164402] nouveau [ DRM] TMDS table version 1.1
[ 4.164406] nouveau [ DRM] DCB version 3.0
[ 4.164410] nouveau [ DRM] DCB outp 00: 01000100 00000028
[ 4.164413] nouveau [ DRM] DCB outp 01: 03000102 00000000
[ 4.164416] nouveau [ DRM] DCB outp 02: 04011210 00000028
[ 4.164419] nouveau [ DRM] DCB outp 03: 04011212 00000000
[ 4.164422] nouveau [ DRM] DCB conn 00: 1030
[ 4.164426] nouveau [ DRM] DCB conn 01: 2130
[ 4.166263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.166267] [drm] No driver support for vblank timestamp query.
[ 4.166277] nouveau [ DRM] 0x1634: Parsing digital output script table
[ 4.215795] nouveau [ DRM] 0x169B: Parsing digital output script table
[ 4.272772] nouveau [ DRM] MM: using M2MF for buffer copies
[ 4.334318] nouveau [ DRM] allocated 1680x1050 fb: 0x9000, bo c0000001761e2400
[ 4.354684] nouveau [ DRM] 0x1634: Parsing digital output script table
[ 4.404606] windfarm: CPUs control loops started.
[ 4.424369] Console: switching to colour frame buffer device 160x64
[ 4.475430] firewire_core 0001:03:0e.0: created device fw0: GUID 001124fffed6d25c, S800
[ 4.475490] firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5
[ 4.484373] nouveau E[ DRM] GPU lockup - switching to software fbcon
[ 4.488931] nouveau 0000:0a:00.0: fb0: nouveaufb frame buffer device
[ 4.488934] nouveau 0000:0a:00.0: registered panic notifier
[ 4.488946] [drm] Initialized nouveau 1.1.2 20120801 for 0000:0a:00.0 on minor 0
[ 4.698319] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.213008] random: nonblocking pool is initialized
[ 5.731774] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 6.729819] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 9a 13 7b 12 0 0
[ 7.986024] Adding 9974760k swap on /dev/sda4. Priority:-1 extents:1 across:9974760k FS
[ 8.060166] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 8.932086] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.932097] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 9.057656] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 a 13 7b 12 0 0
[ 9.144096] systemd-udevd[341]: starting version 204
[ 10.343233] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
[ 10.388578] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 11.015858] lp: driver loaded but no devices found
[ 11.028870] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 11.113355] ppdev: user-space parallel port driver
[ 11.390941] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 7b 12 7b 12 0 0
[ 12.737928] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 13.743214] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 9a 13 7b 12 0 0
[ 13.792954] snd-aoa-codec-onyx: created and attached onyx instance
[ 13.793428] snd-aoa-codec-onyx: created and attached onyx instance
[ 13.825494] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 14.391089] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.880165] windfarm: Backside control loop started.
[ 14.961244] windfarm: Slots control loop started.
[ 15.123934] windfarm: Drive bay control loop started.
[ 16.248819] type=1400 audit(1453044344.233:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=450 comm="apparmor_parser"
[ 16.248831] type=1400 audit(1453044344.233:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[ 16.248839] type=1400 audit(1453044344.233:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[ 16.249367] type=1400 audit(1453044344.233:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[ 16.249377] type=1400 audit(1453044344.233:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[ 16.249652] type=1400 audit(1453044344.233:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[ 16.250962] type=1400 audit(1453044344.233:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=480 comm="apparmor_parser"
[ 16.250975] type=1400 audit(1453044344.233:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
[ 16.250983] type=1400 audit(1453044344.233:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
[ 16.251572] type=1400 audit(1453044344.237:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
[ 18.559404] u3msi: allocated virq 0x1a (hw 0x9) addr 0xfee00000
[ 18.600369] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.299820] Bluetooth: Core ver 2.17
[ 19.299856] NET: Registered protocol family 31
[ 19.299859] Bluetooth: HCI device and connection manager initialized
[ 19.299884] Bluetooth: HCI socket layer initialized
[ 19.299888] Bluetooth: L2CAP socket layer initialized
[ 19.299896] Bluetooth: SCO socket layer initialized
[ 19.349063] init: avahi-cups-reload main process (609) terminated with status 1
[ 19.489239] Bluetooth: RFCOMM TTY layer initialized
[ 19.489259] Bluetooth: RFCOMM socket layer initialized
[ 19.489275] Bluetooth: RFCOMM ver 1.11
[ 19.632202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.632207] Bluetooth: BNEP filters: protocol multicast
[ 19.632224] Bluetooth: BNEP socket layer initialized
[ 20.281812] tg3 0001:05:04.0 eth0: Link is up at 100 Mbps, full duplex
[ 20.281823] tg3 0001:05:04.0 eth0: Flow control is on for TX and on for RX
[ 20.281843] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.538882] init: smbd main process (532) killed by HUP signal
[ 22.538905] init: smbd main process ended, respawning
[ 25.405126] audit_printk_skb: 33 callbacks suppressed
[ 25.405132] type=1400 audit(1453044353.389:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=786 comm="apparmor_parser"
[ 25.772631] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 25.953041] init: failsafe main process (507) killed by TERM signal
[ 26.984286] type=1400 audit(1453044354.969:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=928 comm="apparmor_parser"
[ 26.986609] type=1400 audit(1453044354.969:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=926 comm="apparmor_parser"
[ 26.986624] type=1400 audit(1453044354.969:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=926 comm="apparmor_parser"
[ 26.986633] type=1400 audit(1453044354.969:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=926 comm="apparmor_parser"
[ 26.987166] type=1400 audit(1453044354.969:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=926 comm="apparmor_parser"
[ 26.987174] type=1400 audit(1453044354.969:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=926 comm="apparmor_parser"
[ 26.987509] type=1400 audit(1453044354.973:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=926 comm="apparmor_parser"
[ 26.992394] type=1400 audit(1453044354.977:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=929 comm="apparmor_parser"
[ 26.992410] type=1400 audit(1453044354.977:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=929 comm="apparmor_parser"
[ 29.378584] init: samba-ad-dc main process (767) terminated with status 1
[ 29.435094] init: gdm main process (1009) killed by TERM signalEt le Xorg.log
[ 32.024]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 32.025] X Protocol Version 11, Revision 0
[ 32.025] Build Operating System: Linux 3.13.0-45-powerpc64-smp ppc Ubuntu
[ 32.025] Current Operating System: Linux gilles-power-mac-g5 3.13.0-74-powerpc64-smp #118-Ubuntu SMP Thu Dec 17 23:07:20 UTC 2015 ppc64
[ 32.025] Kernel command line: root=UUID=c5c7317d-3e9e-462c-ae70-2eb134f1a34f ro quiet splash
[ 32.025] Build Date: 12 February 2015 02:53:48PM
[ 32.025] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 32.025] Current version of pixman: 0.30.2
[ 32.025] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 32.025] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 32.025] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 17 16:26:02 2016
[ 32.219] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 32.430] (==) No Layout section. Using the first Screen section.
[ 32.430] (==) No screen section available. Using defaults.
[ 32.430] (**) |-->Screen "Default Screen Section" (0)
[ 32.430] (**) | |-->Monitor "<default monitor>"
[ 32.430] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 32.431] (==) Automatically adding devices
[ 32.431] (==) Automatically enabling devices
[ 32.431] (==) Automatically adding GPU devices
[ 32.553] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 32.553] Entry deleted from font path.
[ 32.553] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 32.553] Entry deleted from font path.
[ 32.553] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 32.553] Entry deleted from font path.
[ 32.553] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 32.554] Entry deleted from font path.
[ 32.554] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 32.554] Entry deleted from font path.
[ 32.554] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 32.554] Entry deleted from font path.
[ 32.554] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 32.554] (==) ModulePath set to "/usr/lib/powerpc-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 32.554] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 32.608] (II) Loader magic: 0x206c1694
[ 32.608] (II) Module ABI versions:
[ 32.608] X.Org ANSI C Emulation: 0.4
[ 32.608] X.Org Video Driver: 15.0
[ 32.608] X.Org XInput driver : 20.0
[ 32.608] X.Org Server Extension : 8.0
[ 32.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 32.610] (--) PCI:*(0:10:0:0) 10de:0092:10de:0052 rev 161, Mem @ 0xa1000000/16777216, 0x90000000/268435456, 0xa0000000/16777216, BIOS @ 0x????????/131072
[ 32.631] Initializing built-in extension Generic Event Extension
[ 32.631] Initializing built-in extension SHAPE
[ 32.631] Initializing built-in extension MIT-SHM
[ 32.631] Initializing built-in extension XInputExtension
[ 32.631] Initializing built-in extension XTEST
[ 32.631] Initializing built-in extension BIG-REQUESTS
[ 32.631] Initializing built-in extension SYNC
[ 32.631] Initializing built-in extension XKEYBOARD
[ 32.631] Initializing built-in extension XC-MISC
[ 32.631] Initializing built-in extension SECURITY
[ 32.631] Initializing built-in extension XINERAMA
[ 32.631] Initializing built-in extension XFIXES
[ 32.631] Initializing built-in extension RENDER
[ 32.631] Initializing built-in extension RANDR
[ 32.631] Initializing built-in extension COMPOSITE
[ 32.631] Initializing built-in extension DAMAGE
[ 32.631] Initializing built-in extension MIT-SCREEN-SAVER
[ 32.632] Initializing built-in extension DOUBLE-BUFFER
[ 32.632] Initializing built-in extension RECORD
[ 32.632] Initializing built-in extension DPMS
[ 32.632] Initializing built-in extension Present
[ 32.632] Initializing built-in extension DRI3
[ 32.632] Initializing built-in extension X-Resource
[ 32.632] Initializing built-in extension XVideo
[ 32.632] Initializing built-in extension XVideo-MotionCompensation
[ 32.632] Initializing built-in extension SELinux
[ 32.632] Initializing built-in extension XFree86-VidModeExtension
[ 32.632] Initializing built-in extension XFree86-DGA
[ 32.632] Initializing built-in extension XFree86-DRI
[ 32.632] Initializing built-in extension DRI2
[ 32.632] (II) LoadModule: "glx"
[ 32.655] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 32.954] (II) Module glx: vendor="X.Org Foundation"
[ 32.954] compiled for 1.15.1, module version = 1.0.0
[ 32.954] ABI class: X.Org Server Extension, version 8.0
[ 32.954] (==) AIGLX enabled
[ 32.955] Loading extension GLX
[ 32.955] (==) Matched nvidia as autoconfigured driver 0
[ 32.955] (==) Matched nouveau as autoconfigured driver 1
[ 32.955] (==) Matched nvidia as autoconfigured driver 2
[ 32.955] (==) Matched nouveau as autoconfigured driver 3
[ 32.955] (==) Matched modesetting as autoconfigured driver 4
[ 32.955] (==) Matched fbdev as autoconfigured driver 5
[ 32.955] (==) Assigned the driver to the xf86ConfigLayout
[ 32.955] (II) LoadModule: "nvidia"
[ 32.956] (WW) Warning, couldn't open module nvidia
[ 32.956] (II) UnloadModule: "nvidia"
[ 32.956] (II) Unloading nvidia
[ 32.956] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 32.956] (II) LoadModule: "nouveau"
[ 32.956] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 33.006] (II) Module nouveau: vendor="X.Org Foundation"
[ 33.006] compiled for 1.15.0, module version = 1.0.10
[ 33.006] Module class: X.Org Video Driver
[ 33.006] ABI class: X.Org Video Driver, version 15.0
[ 33.006] (II) LoadModule: "modesetting"
[ 33.007] (WW) Warning, couldn't open module modesetting
[ 33.007] (II) UnloadModule: "modesetting"
[ 33.007] (II) Unloading modesetting
[ 33.007] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 33.007] (II) LoadModule: "fbdev"
[ 33.007] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 33.033] (II) Module fbdev: vendor="X.Org Foundation"
[ 33.033] compiled for 1.15.0, module version = 0.4.4
[ 33.033] Module class: X.Org Video Driver
[ 33.033] ABI class: X.Org Video Driver, version 15.0
[ 33.033] (==) Matched nvidia as autoconfigured driver 0
[ 33.033] (==) Matched nouveau as autoconfigured driver 1
[ 33.033] (==) Matched nvidia as autoconfigured driver 2
[ 33.033] (==) Matched nouveau as autoconfigured driver 3
[ 33.033] (==) Matched modesetting as autoconfigured driver 4
[ 33.033] (==) Matched fbdev as autoconfigured driver 5
[ 33.033] (==) Assigned the driver to the xf86ConfigLayout
[ 33.033] (II) LoadModule: "nvidia"
[ 33.034] (WW) Warning, couldn't open module nvidia
[ 33.034] (II) UnloadModule: "nvidia"
[ 33.034] (II) Unloading nvidia
[ 33.034] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 33.034] (II) LoadModule: "nouveau"
[ 33.034] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 33.034] (II) Module nouveau: vendor="X.Org Foundation"
[ 33.034] compiled for 1.15.0, module version = 1.0.10
[ 33.034] Module class: X.Org Video Driver
[ 33.034] ABI class: X.Org Video Driver, version 15.0
[ 33.034] (II) UnloadModule: "nouveau"
[ 33.034] (II) Unloading nouveau
[ 33.034] (II) Failed to load module "nouveau" (already loaded, 0)
[ 33.034] (II) LoadModule: "modesetting"
[ 33.035] (WW) Warning, couldn't open module modesetting
[ 33.035] (II) UnloadModule: "modesetting"
[ 33.035] (II) Unloading modesetting
[ 33.035] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 33.035] (II) LoadModule: "fbdev"
[ 33.035] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 33.035] (II) Module fbdev: vendor="X.Org Foundation"
[ 33.035] compiled for 1.15.0, module version = 0.4.4
[ 33.035] Module class: X.Org Video Driver
[ 33.035] ABI class: X.Org Video Driver, version 15.0
[ 33.035] (II) UnloadModule: "fbdev"
[ 33.035] (II) Unloading fbdev
[ 33.035] (II) Failed to load module "fbdev" (already loaded, 0)
[ 33.035] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 33.035] (II) NOUVEAU driver for NVIDIA chipset families :
[ 33.035] RIVA TNT (NV04)
[ 33.036] RIVA TNT2 (NV05)
[ 33.036] GeForce 256 (NV10)
[ 33.036] GeForce 2 (NV11, NV15)
[ 33.036] GeForce 4MX (NV17, NV18)
[ 33.036] GeForce 3 (NV20)
[ 33.036] GeForce 4Ti (NV25, NV28)
[ 33.036] GeForce FX (NV3x)
[ 33.036] GeForce 6 (NV4x)
[ 33.036] GeForce 7 (G7x)
[ 33.036] GeForce 8 (G8x)
[ 33.036] GeForce GTX 200 (NVA0)
[ 33.036] GeForce GTX 400 (NVC0)
[ 33.036] (II) FBDEV: driver for framebuffer: fbdev
[ 33.036] (++) using VT number 7
[ 33.037] (II) [drm] nouveau interface version: 1.1.2
[ 33.037] (WW) Falling back to old probe method for fbdev
[ 33.037] (II) Loading sub module "fbdevhw"
[ 33.037] (II) LoadModule: "fbdevhw"
[ 33.037] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 33.055] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 33.055] compiled for 1.15.1, module version = 0.0.2
[ 33.055] ABI class: X.Org Video Driver, version 15.0
[ 33.056] (II) Loading sub module "dri2"
[ 33.056] (II) LoadModule: "dri2"
[ 33.056] (II) Module "dri2" already built-in
[ 33.056] (--) NOUVEAU(0): Chipset: "NVIDIA NV47"
[ 33.056] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 33.056] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 33.056] (==) NOUVEAU(0): RGB weight 888
[ 33.056] (==) NOUVEAU(0): Default visual is TrueColor
[ 33.056] (==) NOUVEAU(0): Using HW cursor
[ 33.056] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 33.056] (==) NOUVEAU(0): Page flipping enabled
[ 33.056] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 33.088] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 33.118] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 33.174] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 33.175] (II) NOUVEAU(0): Manufacturer: GSM Model: 5663 Serial#: 20111
[ 33.175] (II) NOUVEAU(0): Year: 2008 Week: 2
[ 33.175] (II) NOUVEAU(0): EDID Version: 1.3
[ 33.175] (II) NOUVEAU(0): Digital Display Input
[ 33.175] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 33.175] (II) NOUVEAU(0): Gamma: 2.20
[ 33.175] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 33.175] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 33.175] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 33.175] (II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.605
[ 33.175] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 33.175] (II) NOUVEAU(0): Supported established timings:
[ 33.175] (II) NOUVEAU(0): 720x400@70Hz
[ 33.175] (II) NOUVEAU(0): 640x480@60Hz
[ 33.175] (II) NOUVEAU(0): 640x480@75Hz
[ 33.175] (II) NOUVEAU(0): 800x600@56Hz
[ 33.175] (II) NOUVEAU(0): 800x600@60Hz
[ 33.175] (II) NOUVEAU(0): 800x600@75Hz
[ 33.175] (II) NOUVEAU(0): 832x624@75Hz
[ 33.175] (II) NOUVEAU(0): 1024x768@60Hz
[ 33.175] (II) NOUVEAU(0): 1024x768@75Hz
[ 33.175] (II) NOUVEAU(0): 1280x1024@75Hz
[ 33.175] (II) NOUVEAU(0): 1152x864@75Hz
[ 33.175] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 33.175] (II) NOUVEAU(0): Supported standard timings:
[ 33.175] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 33.175] (II) NOUVEAU(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 33.175] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 33.175] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 33.175] (II) NOUVEAU(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 33.175] (II) NOUVEAU(0): Supported detailed timing:
[ 33.175] (II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 33.175] (II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 33.175] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 33.175] (II) NOUVEAU(0): Supported detailed timing:
[ 33.175] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 33.175] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 33.175] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 33.175] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz
[ 33.175] (II) NOUVEAU(0): Monitor name: L225W
[ 33.175] (II) NOUVEAU(0): EDID (in hex):
[ 33.175] (II) NOUVEAU(0): 00ffffffffffff001e6d63568f4e0000
[ 33.175] (II) NOUVEAU(0): 02120103ea2f1e78ead425a455499b27
[ 33.175] (II) NOUVEAU(0): 135054a76b80950f950081808140714f
[ 33.176] (II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
[ 33.176] (II) NOUVEAU(0): 3600da281100001a21399030621a2740
[ 33.176] (II) NOUVEAU(0): 68b03600da281100001c000000fd0038
[ 33.176] (II) NOUVEAU(0): 4b1c530f000a202020202020000000fc
[ 33.176] (II) NOUVEAU(0): 004c323235570a202020202020200064
[ 33.176] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 33.176] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 33.176] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.176] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33.206] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 33.206] (II) NOUVEAU(0): Manufacturer: GRE Model: 0 Serial#: 16843009
[ 33.206] (II) NOUVEAU(0): Year: 2003 Week: 32
[ 33.206] (II) NOUVEAU(0): EDID Version: 1.3
[ 33.206] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 33.206] (II) NOUVEAU(0): Sync: Separate Composite
[ 33.206] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 36 vert.: 29
[ 33.206] (II) NOUVEAU(0): Gamma: 2.83
[ 33.206] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 33.207] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 33.207] (II) NOUVEAU(0): redX: 0.642 redY: 0.330 greenX: 0.272 greenY: 0.609
[ 33.207] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.066 whiteX: 0.281 whiteY: 0.311
[ 33.207] (II) NOUVEAU(0): Supported established timings:
[ 33.207] (II) NOUVEAU(0): 720x400@70Hz
[ 33.207] (II) NOUVEAU(0): 640x480@60Hz
[ 33.207] (II) NOUVEAU(0): 640x480@72Hz
[ 33.207] (II) NOUVEAU(0): 640x480@75Hz
[ 33.207] (II) NOUVEAU(0): 800x600@56Hz
[ 33.207] (II) NOUVEAU(0): 800x600@60Hz
[ 33.207] (II) NOUVEAU(0): 800x600@72Hz
[ 33.207] (II) NOUVEAU(0): 800x600@75Hz
[ 33.207] (II) NOUVEAU(0): 1024x768@60Hz
[ 33.207] (II) NOUVEAU(0): 1024x768@70Hz
[ 33.207] (II) NOUVEAU(0): 1024x768@75Hz
[ 33.207] (II) NOUVEAU(0): 1280x1024@75Hz
[ 33.207] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 33.207] (II) NOUVEAU(0): Supported standard timings:
[ 33.207] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 33.207] (II) NOUVEAU(0): Supported detailed timing:
[ 33.207] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 359 x 287 mm
[ 33.207] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 33.207] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 33.207] (II) NOUVEAU(0): Monitor name: LM17A
[ 33.207] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[ 33.207] (II) NOUVEAU(0): Serial No: 0
[ 33.207] (II) NOUVEAU(0): EDID (in hex):
[ 33.207] (II) NOUVEAU(0): 00ffffffffffff001e45000001010101
[ 33.207] (II) NOUVEAU(0): 200d01036c241db7ea6c82a454459c24
[ 33.207] (II) NOUVEAU(0): 11484fafcf0081800101010101010101
[ 33.207] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 33.207] (II) NOUVEAU(0): 1300671f1100001e000000fc004c4d31
[ 33.207] (II) NOUVEAU(0): 37410a20202020202020000000fd0032
[ 33.207] (II) NOUVEAU(0): 4c1e500e000a202020202020000000ff
[ 33.207] (II) NOUVEAU(0): 00300a20202020202020202020200069
[ 33.207] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 33.207] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 33.207] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33.207] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 33.208] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 33.208] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.208] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33.208] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 33.208] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 33.208] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 33.208] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024
[ 33.208] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1280x1024
[ 33.208] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 33.208] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 33.208] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 33.208] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.208] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 33.208] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33.208] (==) NOUVEAU(0): DPI set to (96, 96)
[ 33.208] (II) Loading sub module "fb"
[ 33.208] (II) LoadModule: "fb"
[ 33.209] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 33.221] (II) Module fb: vendor="X.Org Foundation"
[ 33.221] compiled for 1.15.1, module version = 1.0.0
[ 33.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33.221] (II) Loading sub module "exa"
[ 33.221] (II) LoadModule: "exa"
[ 33.221] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 33.232] (II) Module exa: vendor="X.Org Foundation"
[ 33.232] compiled for 1.15.1, module version = 2.6.0
[ 33.232] ABI class: X.Org Video Driver, version 15.0
[ 33.232] (II) Loading sub module "shadowfb"
[ 33.232] (II) LoadModule: "shadowfb"
[ 33.233] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 33.233] (II) Module shadowfb: vendor="X.Org Foundation"
[ 33.233] compiled for 1.15.1, module version = 1.0.0
[ 33.233] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33.233] (II) UnloadModule: "fbdev"
[ 33.233] (II) Unloading fbdev
[ 33.233] (II) UnloadSubModule: "fbdevhw"
[ 33.233] (II) Unloading fbdevhw
[ 33.234] (--) Depth 24 pixmap format is 32 bpp
[ 33.234] (II) NOUVEAU(0): Opened GPU channel 0
[ 33.242] (II) NOUVEAU(0): [DRI2] Setup complete
[ 33.242] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 33.242] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 33.245] (II) EXA(0): Driver allocated offscreen pixmaps
[ 33.246] (II) EXA(0): Driver registered support for the following operations:
[ 33.246] (II) Solid
[ 33.246] (II) Copy
[ 33.246] (II) Composite (RENDER acceleration)
[ 33.246] (II) UploadToScreen
[ 33.246] (II) DownloadFromScreen
[ 33.246] (==) NOUVEAU(0): Backing store enabled
[ 33.246] (==) NOUVEAU(0): Silken mouse enabled
[ 33.247] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 33.247] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 33.247] (==) NOUVEAU(0): DPMS enabled
[ 33.247] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 33.248] (--) RandR disabled
[ 33.272] (II) SELinux: Disabled on system
[ 33.639] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 33.639] (II) AIGLX: enabled GLX_ARB_create_context
[ 33.639] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 33.639] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 33.639] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 33.639] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 33.639] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 33.639] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 33.639] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 33.639] (II) AIGLX: Loaded and initialized nouveau
[ 33.639] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 33.652] (II) NOUVEAU(0): NVEnterVT is called.
[ 33.722] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 33.722] resize called 1280 1024
[ 33.857] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 33.870] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:0b.0/0000:0a:00.0/drm/card0
[ 33.870] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 33.871] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event1)
[ 33.871] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 33.871] (II) LoadModule: "evdev"
[ 33.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 33.932] (II) Module evdev: vendor="X.Org Foundation"
[ 33.932] compiled for 1.15.0, module version = 2.8.2
[ 33.932] Module class: X.Org XInput Driver
[ 33.932] ABI class: X.Org XInput driver, version 20.0
[ 33.932] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 33.932] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 33.932] (**) evdev: Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event1"
[ 33.932] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Vendor 0x5ac Product 0x205
[ 33.932] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 33.932] (II) evdev: Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 33.932] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
[ 33.932] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD, id 6)
[ 33.932] (**) Option "xkb_rules" "evdev"
[ 33.932] (**) Option "xkb_model" "pc105"
[ 33.932] (**) Option "xkb_layout" "fr"
[ 33.932] (**) Option "xkb_variant" "mac"
[ 33.944] (II) XKB: generating xkmfile /var/lib/xkb/server-FFFB17AF88B9BF77E6DD80C90968D22674969102.xkm
[ 34.225] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event2)
[ 34.225] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 34.225] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 34.225] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 34.225] (**) evdev: Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event2"
[ 34.225] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Vendor 0x5ac Product 0x205
[ 34.225] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 34.225] (II) evdev: Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 34.225] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input2/event2"
[ 34.225] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD, id 7)
[ 34.225] (**) Option "xkb_rules" "evdev"
[ 34.225] (**) Option "xkb_model" "pc105"
[ 34.225] (**) Option "xkb_layout" "fr"
[ 34.225] (**) Option "xkb_variant" "mac"
[ 34.226] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event0)
[ 34.226] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 34.226] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 34.226] (**) Logitech USB Optical Mouse: always reports core events
[ 34.226] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event0"
[ 34.226] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc00c
[ 34.226] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 34.226] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 34.226] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 34.227] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 34.227] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 34.227] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 34.227] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 34.227] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 34.227] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.0/input/input0/event0"
[ 34.227] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 34.227] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 34.227] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 34.227] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 34.227] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 34.227] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 34.228] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 34.228] (II) No input driver specified, ignoring this device.
[ 34.228] (II) This device may have been added with another device file.
[ 34.231] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event3)
[ 34.231] (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
[ 34.231] (II) Using input driver 'evdev' for 'Macintosh mouse button emulation'
[ 34.231] (**) Macintosh mouse button emulation: always reports core events
[ 34.231] (**) evdev: Macintosh mouse button emulation: Device: "/dev/input/event3"
[ 34.231] (--) evdev: Macintosh mouse button emulation: Vendor 0x1 Product 0x1
[ 34.231] (--) evdev: Macintosh mouse button emulation: Found 3 mouse buttons
[ 34.231] (--) evdev: Macintosh mouse button emulation: Found relative axes
[ 34.231] (--) evdev: Macintosh mouse button emulation: Found x and y relative axes
[ 34.231] (II) evdev: Macintosh mouse button emulation: Configuring as mouse
[ 34.232] (**) evdev: Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 34.232] (**) evdev: Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 34.232] (**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event3"
[ 34.232] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE, id 9)
[ 34.232] (II) evdev: Macintosh mouse button emulation: initialized for relative axes.
[ 34.232] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 34.232] (**) Macintosh mouse button emulation: (accel) acceleration profile 0
[ 34.232] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 34.232] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 34.232] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse1)
[ 34.232] (II) No input driver specified, ignoring this device.
[ 34.232] (II) This device may have been added with another device file.
[ 86.471] (II) NOUVEAU(0): EDID vendor "GRE", prod id 0
[ 86.471] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 86.471] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 86.471] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 86.471] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 86.471] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 86.471] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 86.472] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 103.139] (II) NOUVEAU(0): EDID vendor "GRE", prod id 0
[ 103.139] (II) NOUVEAU(0): Using hsync ranges from config file
[ 103.139] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 103.139] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 103.139] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 103.139] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 103.139] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 103.140] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 103.758] resize called 2960 1050
[ 194.293] (EE)
[ 194.294] (EE) Backtrace:
[ 194.294] (EE) 0: /usr/bin/X (xorg_backtrace+0x68) [0x20662018]
[ 194.294] (EE) 1: /usr/bin/X (0x20462000+0x204fa0) [0x20666fa0]
[ 194.294] (EE) 2: (vdso) (__kernel_sigtramp_rt32+0x0) [0x1003c0]
[ 194.294] (EE) 3: /lib/powerpc-linux-gnu/libc.so.6 (0x1fe6b000+0x94e40) [0x1feffe40]
[ 194.294] (EE) 4: ?? [0x0]
[ 194.294] (EE) 5: ?? [0x28442828]
[ 194.294] (EE) 6: /usr/lib/xorg/modules/libexa.so (0x1f55e000+0x5b14) [0x1f563b14]
[ 194.294] (EE) 7: /usr/lib/xorg/modules/libexa.so (0x1f55e000+0x612c) [0x1f56412c]
[ 194.294] (EE) 8: /usr/lib/xorg/modules/libexa.so (0x1f55e000+0x8dcc) [0x1f566dcc]
[ 194.294] (EE) 9: /usr/lib/xorg/modules/libexa.so (0x1f55e000+0x1311c) [0x1f57111c]
[ 194.294] (EE) 10: /usr/lib/xorg/modules/libexa.so (0x1f55e000+0xf778) [0x1f56d778]
[ 194.294] (EE) 11: /usr/lib/xorg/modules/libexa.so (0x1f55e000+0xd560) [0x1f56b560]
[ 194.294] (EE) 12: /usr/bin/X (0x20462000+0x175f90) [0x205d7f90]
[ 194.295] (EE) 13: /usr/bin/X (CompositeGlyphs+0xc0) [0x205bd560]
[ 194.295] (EE) 14: /usr/bin/X (0x20462000+0x1694a4) [0x205cb4a4]
[ 194.295] (EE) 15: /usr/bin/X (0x20462000+0x163624) [0x205c5624]
[ 194.295] (EE) 16: /usr/bin/X (0x20462000+0x578ec) [0x204b98ec]
[ 194.295] (EE) 17: /usr/bin/X (0x20462000+0x5c548) [0x204be548]
[ 194.295] (EE) 18: /usr/bin/X (0x20462000+0x42504) [0x204a4504]
[ 194.295] (EE) 19: /lib/powerpc-linux-gnu/libc.so.6 (0x1fe6b000+0x23294) [0x1fe8e294]
[ 194.295] (EE) 20: /lib/powerpc-linux-gnu/libc.so.6 (0x1fe6b000+0x23454) [0x1fe8e454]
[ 194.295] (EE)
[ 194.295] (EE) Segmentation fault at address 0x0
[ 194.295] (EE)
Fatal server error:
[ 194.295] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 194.296] (EE)
[ 194.296] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 194.296] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 194.296] (EE)
[ 194.296] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 194.296] (II) NOUVEAU(0): NVLeaveVT is called.
[ 194.303] (EE) Server terminated with error (1). Closing log file.Hors ligne
Pages : 1