#1 Le 24/05/2019, à 19:28
- Christopher2b1
Boot échoue après installation kubuntu 16.04.1
Bonjour,
J'ai créé une clé usb bootable avec kubuntu 16.04.1 et ai installé kubuntu sur un appareil Compaq CQ70-103EF en supprimant la partition d'origine qui était consacrée à Windows Vista.
Au boot, kubuntu semble s'amorcer puis un message s'affiche:
"BusyBox v1.17.1 (Kubuntu etc) built-in shell (ash)
"Enter 'help' for a list of built-in commands
"(initramfs)"
Après l'installation j'ai procédé à l'utilisation de Boot-Repair qui m'a donné le boot-info suivant:
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>.......;..9...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 3244552 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 230,387,711 230,385,664 83 Linux
/dev/sda2 230,389,758 234,440,703 4,050,946 5 Extended
/dev/sda5 230,389,760 234,440,703 4,050,944 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1.9 GiB, 2021654016 bytes, 3948543 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 3,948,542 3,948,480 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 63346c18-8352-4b3b-b080-7ed862bace60 ext4
/dev/sda5 1254bba1-b77e-48d8-8a21-a50fae31c03d swap
/dev/sdb1 C086-55EE vfat MYLINUXLIVE
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 23 05:39 ata-HL-DT-ST_DVDRAM_GSA-T50L_K018B5A2547 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 23 05:52 ata-WDC_WD1200BEVS-60UST0_WD-WXE908VYP689 -> ../../sda
lrwxrwxrwx 1 root root 10 May 23 05:52 ata-WDC_WD1200BEVS-60UST0_WD-WXE908VYP689-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 23 05:52 ata-WDC_WD1200BEVS-60UST0_WD-WXE908VYP689-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 23 05:52 ata-WDC_WD1200BEVS-60UST0_WD-WXE908VYP689-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 May 23 05:52 usb-Generic-_Multi-Card_20071114173400000-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 May 23 05:51 usb-Ut163_USB2FlashStorage_080126f56cc7c8-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 23 05:51 usb-Ut163_USB2FlashStorage_080126f56cc7c8-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 May 23 05:52 wwn-0x50014ee257634820 -> ../../sda
lrwxrwxrwx 1 root root 10 May 23 05:52 wwn-0x50014ee257634820-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 23 05:52 wwn-0x50014ee257634820-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 23 05:52 wwn-0x50014ee257634820-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 63346c18-8352-4b3b-b080-7ed862bace60
else
search --no-floppy --fs-uuid --set=root 63346c18-8352-4b3b-b080-7ed862bace60
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-63346c18-8352-4b3b-b080-7ed862bace60' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 63346c18-8352-4b3b-b080-7ed862bace60
else
search --no-floppy --fs-uuid --set=root 63346c18-8352-4b3b-b080-7ed862bace60
fi
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=63346c18-8352-4b3b-b080-7ed862bace60 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-31-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-63346c18-8352-4b3b-b080-7ed862bace60' {
menuentry 'Ubuntu, with Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-63346c18-8352-4b3b-b080-7ed862bace60' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 63346c18-8352-4b3b-b080-7ed862bace60
else
search --no-floppy --fs-uuid --set=root 63346c18-8352-4b3b-b080-7ed862bace60
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=63346c18-8352-4b3b-b080-7ed862bace60 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-63346c18-8352-4b3b-b080-7ed862bace60' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 63346c18-8352-4b3b-b080-7ed862bace60
else
search --no-floppy --fs-uuid --set=root 63346c18-8352-4b3b-b080-7ed862bace60
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=63346c18-8352-4b3b-b080-7ed862bace60 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 63346c18-8352-4b3b-b080-7ed862bace60
else
search --no-floppy --fs-uuid --set=root 63346c18-8352-4b3b-b080-7ed862bace60
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 63346c18-8352-4b3b-b080-7ed862bace60
else
search --no-floppy --fs-uuid --set=root 63346c18-8352-4b3b-b080-7ed862bace60
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdc1 during installation
UUID=63346c18-8352-4b3b-b080-7ed862bace60 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=1254bba1-b77e-48d8-8a21-a50fae31c03d none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
70.149532318 = 75.322486784 boot/grub/grub.cfg 1
70.156555176 = 75.330027520 boot/grub/i386-pc/core.img 1
70.141353607 = 75.313704960 boot/vmlinuz-4.4.0-31-generic 1
70.141353607 = 75.313704960 vmlinuz 1
4.261184692 = 4.575412224 boot/initrd.img-4.4.0-31-generic 4
4.261184692 = 4.575412224 initrd.img 4
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Start Kubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash ---
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Start Kubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash ---
label ubnentry2
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
label ubnentry3
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry4
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry5
menu label Start Kubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash ---
label ubnentry6
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
label ubnentry7
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? libcom32.c32 1
?? = ?? libutil.c32 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
libcom32.c32 : not a COM32/COM32R module
libutil.c32 : not a COM32/COM32R module
menu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 0b 14 3b 5d 5b 74 66 47 5d d0 00 3a ba e7 33 7a |..;][tfG]..:..3z|
00000010 02 03 4a ee b5 fd 7d d8 4b a2 40 9b 73 07 55 db |..J...}.K.@.s.U.|
00000020 52 ae 84 ae 10 e2 00 89 7f b6 f6 ed 9b 8e f4 e0 |R...............|
00000030 3f 71 a2 e1 df cb e4 f2 c0 d8 44 81 df 8f cd 60 |?q........D....`|
00000040 55 d4 c6 94 9f 2e 4a 48 21 74 29 6e 0d f8 d4 8a |U.....JH!t)n....|
00000050 bf 34 5b db 4c 09 05 25 5f b2 ee 72 d6 66 1b ea |.4[.L..%_..r.f..|
00000060 b2 36 66 ed 1f a8 3e 3a be 70 ba b7 3c 4e 3d b5 |.6f...>:.p..<N=.|
00000070 31 71 56 a5 21 53 9a d0 bc 83 74 eb 83 15 c3 7f |1qV.!S....t.....|
00000080 73 f3 6a df ee dd f8 08 ae 81 c9 74 98 49 4d 1c |s.j........t.IM.|
00000090 61 ea 50 c5 05 a7 e2 ba 9a 41 a6 5f 8b 5a 59 5c |a.P......A._.ZY\|
000000a0 18 d3 ce 61 58 d8 10 d4 3b 99 dd d9 d2 b9 8d 15 |...aX...;.......|
000000b0 c4 39 b1 f2 f1 b1 e6 86 04 4c 71 1e 28 b2 a6 c6 |.9.......Lq.(...|
000000c0 43 3b fa a3 d2 e5 20 fa d6 9a a4 80 96 d4 90 a1 |C;.... .........|
000000d0 6a 09 ce 8f af ea 44 42 5b df 4d fa ca 79 6a 62 |j.....DB[.M..yjb|
000000e0 ec 3b 31 96 5d 33 80 10 47 48 2c 29 23 c8 6c 00 |.;1.]3..GH,)#.l.|
000000f0 ea d5 00 49 fb 76 ed 42 70 76 7c ec e0 f7 6e 5e |...I.v.Bpv|...n^|
00000100 6f bc f6 f3 63 2d 57 eb 4a 12 7e 33 a6 72 d9 7c |o...c-W.J.~3.r.||
00000110 59 40 6d 96 12 d7 31 41 ac 9a da 34 cb 08 b6 f2 |Y@m...1A...4....|
00000120 e5 8f cd 8d 22 3e e9 0b ab ff ac ff e4 1f 9d f4 |....">..........|
00000130 0f 7b be 0d 37 79 f0 58 a4 2a 79 01 d4 60 51 b2 |.{..7y.X.*y..`Q.|
00000140 f6 68 ca 48 e0 12 9c 84 29 a8 58 1d a5 60 1c d1 |.h.H....).X..`..|
00000150 db 23 2f 8a 0c 7e 61 80 d0 dc 0e 8d 43 f2 89 17 |.#/..~a.....C...|
00000160 fc b0 b8 2a 67 1d ba 56 41 a8 72 79 c6 9f 4b 66 |...*g..VA.ry..Kf|
00000170 c9 5a e1 77 16 85 ce d3 b7 f7 8a 1a 69 a9 1c 4d |.Z.w........i..M|
00000180 a2 36 9b 04 f0 d4 e3 83 9c 51 c5 8f 03 bf f1 1a |.6.......Q......|
00000190 ef 83 fe 89 cd 4d 57 94 aa 50 48 ef 82 e0 2c aa |.....MW..PH...,.|
000001a0 f7 bd 41 cd f9 b9 86 a8 03 ba 82 c7 0e 6e b7 bc |..A..........n..|
000001b0 4c d7 0d 94 90 f1 ed 8d dc e6 60 31 9b 95 00 fe |L.........`1....|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 d0 3d 00 00 00 |............=...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/7188/mounts) leaked on lvs invocation. Parent PID 16027: bash
File descriptor 63 (pipe:[72115]) leaked on lvs invocation. Parent PID 16027: bash
ADDITIONAL INFORMATION :
=================== log of boot-repair 20190523_0551 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-repair is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --- BOOT_IMAGE=/ubnkern
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda1:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="63346c18-8352-4b3b-b080-7ed862bace60" TYPE="ext4" PARTUUID="e44aae38-01"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="C086-55EE" TYPE="vfat" PARTUUID="91f72d24-01"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="1254bba1-b77e-48d8-8a21-a50fae31c03d" TYPE="swap" PARTUUID="e44aae38-05"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 19 2016 grub.d
total 76
-rwxr-xr-x 1 root root 9791 Jun 17 2016 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 Jun 17 2016 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA WDC WD1200BEVS-6:;
1:1049kB:118GB:118GB:ext4::boot;
2:118GB:120GB:2074MB:::;
5:118GB:120GB:2074MB:linux-swap(v1)::;
BYT;
/dev/sdb:2022MB:scsi:512:512:msdos:Ut163 USB2FlashStorage:;
1:32.3kB:2022MB:2022MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 111.8G
sda1 part ext4 109.9G
sda2 part 1K
sda5 part swap 2G
sdb disk 1.9G
sdb1 part vfat 1.9G MYLINUXLIVE
sr0 rom 1024M
loop0 loop squashfs 1.4G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda5 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=974404k,nr_inodes=243601,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=197812k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=197812k,mode=700,uid=999,gid=999)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 952M 0 952M 0% /dev
tmpfs tmpfs 194M 8.5M 185M 5% /run
/dev/sdb1 vfat 1.9G 1.6G 354M 82% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 966M 399M 568M 42% /
tmpfs tmpfs 966M 92K 966M 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 966M 0 966M 0% /sys/fs/cgroup
tmpfs tmpfs 966M 12K 966M 1% /tmp
tmpfs tmpfs 194M 12K 194M 1% /run/user/999
/dev/sda1 ext4 109G 4.9G 98G 5% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.4 GiB, 1485787136 bytes, 2901928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xe44aae38
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 230387711 230385664 109.9G 83 Linux
/dev/sda2 230389758 234440703 4050946 2G 5 Extended
/dev/sda5 230389760 234440703 4050944 2G 82 Linux swap / Solaris
Disk /dev/sdb: 1.9 GiB, 2021654016 bytes, 3948543 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x91f72d24
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 63 3948542 3948480 1.9G b W95 FAT32
=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
The boot files of [Ubuntu 16.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
=================== User settings
The settings chosen by the user will reinstall the grub2 of sda1 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s
Unhide GRUB boot menu in sda1/etc/default/grub
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Subsystem: Hewlett-Packard Company Mobile 4 Series Chipset Integrated Graphics Controller [103c:360b]
Kernel driver in use: i915
Kernel modules: i915
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-36ubuntu3.1,grub-install (GRUB) 2.
Reinstall the GRUB of sda1 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
chroot /mnt/boot-sav/sda1 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.4.0-31-generic
Found initrd image: /boot/initrd.img-4.4.0-31-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Unhide GRUB boot menu in sda1/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
The boot files of [Ubuntu 16.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
Depuis cette réparation il n'y a toujours pas de possibilité de démarrer Kubuntu.
Merci à celui qui pourra m'aider::))!
Cordialement,
Christopher2b1
Hors ligne
#2 Le 24/05/2019, à 20:02
- lucmars
Re : Boot échoue après installation kubuntu 16.04.1
Déjà, à vue de nez, kubuntu est trop lourd pour ton pc (optes pour lubuntu, xubuntu ou mate)
Par ailleurs ton support clef/dvd est p'ete mal fait. Puis, comme c'est un vieux pc, le disque aussi. Audites le avant installe sinon c'est peine perdue !
Gaulois Matter !
Hors ligne