#1 Le 25/08/2020, à 16:21
- claudius72
[Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour à tous, je ne suis pas nouveau sur le forum, mais j'ai dû me réinscrire. Voilà mon problème mon fils vient d'acheter une imprimante HP Deskjet 2622, il a la même version que moi sur son PC, Ubuntu 20.04, comme il n'a pas le temps de se consacrer au problème, c'est moi qui s'en charge!! J'ai donc récupéré la bête, et jnous avons le même souci, l'imprimante est bien reconnue, mais pas moyen d'imprimer!!
Je vous donne les infos en suivant le tuto
cat /etc/lsb-release && uname -i && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"
x86_64
fosse adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 04f2:0841 Chicony Electronics Co., Ltd HP Multimedia Keyboard
Bus 008 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 03f0:0053 HP, Inc DeskJet 2620 All-in-One Printer
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:4511 HP, Inc PhotoSmart 2600
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
hp-check
Saving output in log file: /home/fosse/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
/Gtk-Message: 17:16:38.500: Failed to load module "canberra-gtk-module"
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 GNU/Linux
Host: fosse-VD049AA-ABF-p6141fr
Proc: 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[last_used]
device_uri = "hp:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400"
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1598365579
notify_upgrade = false
pending_upgrade_time = 0
[installation]
date_time = 08/25/20 17:16:39
version = 3.20.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
Gtk-Message: 17:16:40.717: Failed to load module "canberra-gtk-module"
Gtk-Message: 17:16:40.764: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/DeskJet_2600_series?serial=CN06K970P706MD' is a Hewlett-Packard DeskJet_2600_series all-in-one
device `hpaio:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400' is a Hewlett-Packard Photosmart_2600_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -------------------------
hp:/usb/DeskJet_2600_series?seri HP DeskJet 2600 series
al=CN06K970P706MD
hp:/usb/Photosmart_2600_series?s HP Photosmart 2600 series
erial=MY55DK73ZJ0400
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Printer
Device URI: hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD
error: Device not found
error: Communication status: Failed
Type: Unknown
Device URI: ///dev/null
Type: Printer
Device URI: hp:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400
Communication status: Good
Type: Printer
Device URI: hp:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400
Communication status: Good
--------------
| PERMISSION |
--------------
USB DeskJet-2600 Required - - OK Node:'/dev/bus/usb/001/005' Perm:' root lp rw- rw- rw- rw- r--'
USB Photosmart-2600 Required - - OK Node:'/dev/bus/usb/003/002' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 14
Total Warnings: 0
Voilà est ce suffisant pour l'instant?
Merci pour votre aide, a bientôt.
Dernière modification par claudius72 (Le 28/08/2020, à 09:45)
#2 Le 25/08/2020, à 16:24
- xubu1957
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour,
Pour ajouter toi-même les balises code à ton précédent message #1, comme demandé dans le premier message du tutoriel Retour utilisable de commande :
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
1) Les balises-code sont les < > (crochets bleus) de la barre de mise en forme.
En séparant bien les retours :
commecela.
cat /etc/lsb-release && uname -i && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"
x86_64
fosse adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 04f2:0841 Chicony Electronics Co., Ltd HP Multimedia Keyboard
Bus 008 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 03f0:0053 HP, Inc DeskJet 2620 All-in-One Printer
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:4511 HP, Inc PhotoSmart 2600
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubhp-check
Saving output in log file: /home/fosse/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
/Gtk-Message: 17:16:38.500: Failed to load module "canberra-gtk-module"
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 GNU/Linux
Host: fosse-VD049AA-ABF-p6141fr
Proc: 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[last_used]
device_uri = "hp:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400"
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1598365579
notify_upgrade = false
pending_upgrade_time = 0
[installation]
date_time = 08/25/20 17:16:39
version = 3.20.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
Gtk-Message: 17:16:40.717: Failed to load module "canberra-gtk-module"
Gtk-Message: 17:16:40.764: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/DeskJet_2600_series?serial=CN06K970P706MD' is a Hewlett-Packard DeskJet_2600_series all-in-one
device `hpaio:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400' is a Hewlett-Packard Photosmart_2600_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -------------------------
hp:/usb/DeskJet_2600_series?seri HP DeskJet 2600 series
al=CN06K970P706MD
hp:/usb/Photosmart_2600_series?s HP Photosmart 2600 series
erial=MY55DK73ZJ0400
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Printer
Device URI: hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD
error: Device not found
error: Communication status: Failed
Type: Unknown
Device URI: ///dev/null
Type: Printer
Device URI: hp:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400
Communication status: Good
Type: Printer
Device URI: hp:/usb/Photosmart_2600_series?serial=MY55DK73ZJ0400
Communication status: Good
--------------
| PERMISSION |
--------------
USB DeskJet-2600 Required - - OK Node:'/dev/bus/usb/001/005' Perm:' root lp rw- rw- rw- rw- r--'
USB Photosmart-2600 Required - - OK Node:'/dev/bus/usb/003/002' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 14
Total Warnings: 0Dernière modification par xubu1957 (Le 25/08/2020, à 16:26)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 25/08/2020, à 16:33
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Rebonjour, à tous, j'ai oublié de préciser que j'ai déjà une HP Photosmart installée et qui fonctionne très bien!!
A +
Claudius72
#4 Le 25/08/2020, à 16:49
- ylag
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour,
Essaie peut-être de reconfigurer l'imprimante après avoir désinstallé le paquet ippusbxd, qui semble causer des problèmes pour certaines imprimantes connectées en USB sur la 20.04 ?
Pour supprimer:
sudo apt purge ippusbxd...si ça n'améliore pas les choses, simplement réinstaller le paquet:
sudo apt install ippusbxdA+
Hors ligne
#5 Le 25/08/2020, à 17:17
- cqfd93
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour,
Bonjour à tous, je ne suis pas nouveau sur le forum, mais j'ai dû me réinscrire.
Pourquoi ?
− cqfd93 −
Hors ligne
#6 Le 25/08/2020, à 19:34
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour, j'ai oublié mon mot de passe, et je n'ai pas penser à utiliser le forum pour le retrouver!!
#7 Le 25/08/2020, à 19:43
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour, j'ai désinstallé et réinstallé mais rien n'a changé, toujours pas possible d'imprimer.
#8 Le 25/08/2020, à 21:05
- ylag
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonsoir,
As-tu tenté de reconfigurer l'imprimante avec le paquet ippusbxd désinstallé ou as-tu simplement réinstallé ce paquet, puis ensuite tenté la réinstallation de l'imprimante?
L'idée étant de voir si la suppression du paquet ippusbxd permettrait le déblocage de l'imprimante.
A+
Hors ligne
#9 Le 25/08/2020, à 21:29
- grigouille
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Les commandes de bases :
Désinstalle
hp-setup -irInstalle
hp-setup -iaxDebian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#10 Le 26/08/2020, à 05:53
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour, pour ylag, j'ai désinstallé le paquet ippusbxd et réinstallé ce paquet puis ensuite tenté la réinstallation de l'imprimante.
Pour grigouille, je n'ai surement pas tapé les bonnes commandes, mais je ne suis pas encore familiarisé avec ces procédures!!
sudo apt install hp-setup-ir
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet hp-setup-irsudo apt install hp-setup-iax
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet hp-setup-iax#11 Le 26/08/2020, à 06:07
- xubu1957
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour,
Pourquoi tu n'as pas passé à l'identique, les commandes données par grigouille au #9 ?
La Doc > § 6 hplip#suppression_de_l_imprimante et § 3.5.1 hplip#sans_la_page_de_test
Dernière modification par xubu1957 (Le 26/08/2020, à 06:08)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#12 Le 26/08/2020, à 06:16
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Voila, c'est fait!!
hp-setup -ir
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
----------------------------
| REMOVING PRINT/FAX QUEUE |
----------------------------
------------------
| SELECT PRINTER |
------------------
Num CUPS Printer
-------- ----------------------
0 DeskJet-2600
1 Photosmart-2600
2 Photosmart-2600-series
Enter number 0...2 for printer (q=quit) ?0
Removing 'DeskJet-2600 : hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD' Queue
Successfully deleted DeskJet-2600 Print/Fax queuehp-setup -iax
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ?#13 Le 26/08/2020, à 06:23
- grigouille
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Visiblement tu as deux imprimantes photosmart-2600. C'est normal ?
Il n'y a pas la fin du hp-setup -iax.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#14 Le 26/08/2020, à 07:10
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Oui, j'ai 2 imprimantes, et la photo smart fonctionne très bien. Voici la suite
hp-setup -iax
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0
Using connection type: usb
Setting up device: hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD
---------------------
| PRINT QUEUE SETUP |
---------------------
Using queue name: DeskJet_2600
Locating PPD file... Please wait.
Found PPD file: hplip:0/ppd/hplip/HP/hp-deskjet_2600_series.ppd
Description:
Adding print queue to CUPS:
Device URI: hp:/usb/DeskJet_2600_series?serial=CN06K970P706MD
Queue name: DeskJet_2600
PPD file: hplip:0/ppd/hplip/HP/hp-deskjet_2600_series.ppd
Location:
Information: DeskJet 2600 Device (Automatically setup by HPLIP)
---------------------
| PRINTER TEST PAGE |
---------------------
Done.#15 Le 26/08/2020, à 07:37
- grigouille
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Fais un test d'impression avec le logiciel de ton choix.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#16 Le 26/08/2020, à 07:57
- cqfd93
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour, j'ai oublié mon mot de passe, et je n'ai pas penser à utiliser le forum pour le retrouver!!
Il faut juste utiliser la procédure de demande de mot de passe en utilisant ce lien pour se connecter. Quel est cet autre compte ?
Il manque toujours les balises code dans ton message 1.
− cqfd93 −
Hors ligne
#17 Le 26/08/2020, à 08:34
- grigouille
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
hp-setup -ir Num CUPS Printer -------- ---------------------- 0 DeskJet-2600 1 Photosmart-2600 2 Photosmart-2600-series
Tu as vraiment deux imprimantes Photosmart ?
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#18 Le 26/08/2020, à 08:38
- xubu1957
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Quel est cet autre compte ?
Vu > Connexion imprimante HP Photosmart 2610, c'est claudius723.
Dernière modification par xubu1957 (Le 26/08/2020, à 08:39)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#19 Le 26/08/2020, à 09:11
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Quel logiciel?
#20 Le 26/08/2020, à 09:16
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Non, j'ai une HP Photosmart 2600 sur mon PC et je configure une HP Deskjet 2600 pour le PC de mon fils, avec aussi Ubuntu 20.04. (voir mon premier post)
#21 Le 26/08/2020, à 09:57
- grigouille
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
N'importe quel logiciel. Un éditeur de texte par exemple. Tu tapes quelques lettres et tu imprimes. Est-ce que l'impression fonctionne ?
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#22 Le 26/08/2020, à 11:36
- ylag
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour,
Bonjour, pour ylag, j'ai désinstallé le paquet ippusbxd et réinstallé ce paquet puis ensuite tenté la réinstallation de l'imprimante.
Il aurait fallu réinstaller l'imprimante avec le paquet ippusbxd désinstallé pour s'assurer que la présence de ce dernier ne bloquait pas le fonctionnement de l'imprimante, mais bon... 
A+
Dernière modification par ylag (Le 26/08/2020, à 11:36)
Hors ligne
#23 Le 26/08/2020, à 17:06
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Bonjour, de toute façon, cela ne fonctionne toujours pas!!
#24 Le 26/08/2020, à 17:14
- claudius72
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Quand je demande d'imprimer une page de test voici le message qui s'affiche:
HPLIP Device Status
Deskjet-2600
Device communication error:test page
(fosse/90)
#25 Le 26/08/2020, à 17:25
- grigouille
Re : [Résolu] Installation imprimante HP Diskjet 2622 impossible
Il ne faut pas demander la page de test. Pour une raison qui m'échappe cela ne fonctionne pas avec la 20.04. Par contre il faut utiliser un autre logiciel (ton navigateur par exemple) et demander l'impression.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne