#1 Le 08/09/2021, à 21:06
- Hada de la Luna
20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Bonjour !
Alors que l'installation de mon imprimante en tant n'a pas posé problème, il ne semble impossible d'installer la fonction scanner (et je n'ai pas encore essayé pour la fonction fax !)
J'ai installé hplip-printer-app 1.0 mais l'application n’apparaît nulle part pour la lancer…
Bref, que faire ?
Hada de la Luna :o)
Hors ligne
#2 Le 09/09/2021, à 07:54
- gl38
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Plusieurs problèmes de non fonctionnement du scanner d'imprimantes HP avec ubuntu 20.04 ont été résolus en supprimant la paquet ippusbxd :
sudo apt purge ippusbxdil faut redémarrer la machine après la suppression.
Il est bien dommage que plus d'un an après la sortie de la 20.04, le problème ne soit pas résolu...
En espérant que le conseil sera utile,
Cordialement,
Guy
Hors ligne
#3 Le 09/09/2021, à 10:04
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Bonjour,
gl38, peux de chance que ce problème soit résolu, ippusbxd est remplacer par ipp-usb à partir le la 21.04.
Le principe de fonctionnement est de permettre d'utiliser des pilote réseaux sur de l'USB.
Sur certain appareil, cela rend indisponible les port USB.
La doc de cette appareil semble exclure cette possibilité, il faudrait que cet appareil soit Airprint !
J'ai ouvert une Issue, mais sans suite.
J'ai décider que se service devais être activé par l'utilisateur, si besoin, et non par le système (cela résoud le problème)
Thierry
Dernière modification par Ordissimo1 (Le 09/09/2021, à 10:05)
Hors ligne
#4 Le 09/09/2021, à 10:19
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Bonjour et merci
Mon imprimante est sur Ethernet pas USB : cela influe-t-il sur la solution proposée ?
Hada de la Luna :o)
Hors ligne
#5 Le 09/09/2021, à 10:25
- xubu1957
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Bonjour,
Montre :
dpkg -l | grep hpliphp-checkhp-scanConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#6 Le 09/09/2021, à 15:00
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
dpkg -l | grep hplip
ii hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data fileshp-check
Saving output in log file: /home/hada/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-81-generic #91-Ubuntu SMP Thu Jul 15 19:09:17 UTC 2021 GNU/Linux
Host: hada-ThinkPad-X200
Proc: 5.4.0-81-generic #91-Ubuntu SMP Thu Jul 15 19:09:17 UTC 2021 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 09/09/21 15:58:11
version = 3.20.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.10 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.10 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Unknown
Device URI: dnssd://Officejet%204500%20G510g-m%20%5B6E1FA9%5D._pdl-datastream._tcp.local/
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 15
Total Warnings: 0
Done.hp-scanHP Linux Imaging and Printing System (ver. 3.20.3)
Scan Utility ver. 2.2
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: No device selected/specified or that supports this functionality.Hada de la Luna :o)
Hors ligne
#7 Le 09/09/2021, à 15:07
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Tu peux nous transmettre le resultat de cette commande :
SANE_DEBUG_DLL=255 scanimage -LHors ligne
#8 Le 09/09/2021, à 15:16
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
SANE_DEBUG_DLL=255 scanimage -L
[16:14:43.738023] [sanei_debug] Setting debug level of dll to 255.
[16:14:43.738121] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29
[16:14:43.738145] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[16:14:43.738170] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[16:14:43.738191] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[16:14:43.738222] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[16:14:43.738250] [dll] sane_init/read_config: reading dll.d/hplip
[16:14:43.738277] [dll] add_backend: adding backend `hpaio'
[16:14:43.738300] [dll] sane_init/read_dlld: done.
[16:14:43.738323] [dll] sane_init/read_config: reading dll.conf
[16:14:43.738346] [dll] add_backend: adding backend `net'
[16:14:43.738362] [dll] add_backend: adding backend `abaton'
[16:14:43.738381] [dll] add_backend: adding backend `agfafocus'
[16:14:43.738399] [dll] add_backend: adding backend `apple'
[16:14:43.738414] [dll] add_backend: adding backend `artec'
[16:14:43.738429] [dll] add_backend: adding backend `artec_eplus48u'
[16:14:43.738446] [dll] add_backend: adding backend `as6e'
[16:14:43.738462] [dll] add_backend: adding backend `avision'
[16:14:43.738477] [dll] add_backend: adding backend `bh'
[16:14:43.738491] [dll] add_backend: adding backend `canon'
[16:14:43.738508] [dll] add_backend: adding backend `canon630u'
[16:14:43.738526] [dll] add_backend: adding backend `canon_dr'
[16:14:43.738540] [dll] add_backend: adding backend `cardscan'
[16:14:43.738555] [dll] add_backend: adding backend `coolscan'
[16:14:43.738573] [dll] add_backend: adding backend `coolscan3'
[16:14:43.738589] [dll] add_backend: adding backend `dell1600n_net'
[16:14:43.738604] [dll] add_backend: adding backend `dmc'
[16:14:43.738619] [dll] add_backend: adding backend `epjitsu'
[16:14:43.738635] [dll] add_backend: adding backend `epson2'
[16:14:43.738652] [dll] add_backend: adding backend `epsonds'
[16:14:43.738667] [dll] add_backend: adding backend `escl'
[16:14:43.738682] [dll] add_backend: adding backend `fujitsu'
[16:14:43.738697] [dll] add_backend: adding backend `genesys'
[16:14:43.738714] [dll] add_backend: adding backend `gt68xx'
[16:14:43.738731] [dll] add_backend: adding backend `hp'
[16:14:43.738746] [dll] add_backend: adding backend `hp3500'
[16:14:43.738761] [dll] add_backend: adding backend `hp3900'
[16:14:43.738778] [dll] add_backend: adding backend `hp4200'
[16:14:43.738794] [dll] add_backend: adding backend `hp5400'
[16:14:43.738809] [dll] add_backend: adding backend `hp5590'
[16:14:43.738824] [dll] add_backend: adding backend `hpljm1005'
[16:14:43.738840] [dll] add_backend: adding backend `hpsj5s'
[16:14:43.738857] [dll] add_backend: adding backend `hs2p'
[16:14:43.738875] [dll] add_backend: adding backend `ibm'
[16:14:43.738891] [dll] add_backend: adding backend `kodak'
[16:14:43.738906] [dll] add_backend: adding backend `kodakaio'
[16:14:43.738922] [dll] add_backend: adding backend `kvs1025'
[16:14:43.738936] [dll] add_backend: adding backend `kvs20xx'
[16:14:43.738953] [dll] add_backend: adding backend `kvs40xx'
[16:14:43.738970] [dll] add_backend: adding backend `leo'
[16:14:43.738986] [dll] add_backend: adding backend `lexmark'
[16:14:43.739001] [dll] add_backend: adding backend `ma1509'
[16:14:43.739016] [dll] add_backend: adding backend `magicolor'
[16:14:43.739033] [dll] add_backend: adding backend `matsushita'
[16:14:43.739051] [dll] add_backend: adding backend `microtek'
[16:14:43.739066] [dll] add_backend: adding backend `microtek2'
[16:14:43.739082] [dll] add_backend: adding backend `mustek'
[16:14:43.739097] [dll] add_backend: adding backend `mustek_usb'
[16:14:43.739114] [dll] add_backend: adding backend `mustek_usb2'
[16:14:43.739132] [dll] add_backend: adding backend `nec'
[16:14:43.739147] [dll] add_backend: adding backend `niash'
[16:14:43.739163] [dll] add_backend: adding backend `pie'
[16:14:43.739178] [dll] add_backend: adding backend `pieusb'
[16:14:43.739195] [dll] add_backend: adding backend `pint'
[16:14:43.739212] [dll] add_backend: adding backend `pixma'
[16:14:43.739228] [dll] add_backend: adding backend `plustek'
[16:14:43.739247] [dll] add_backend: adding backend `qcam'
[16:14:43.739262] [dll] add_backend: adding backend `ricoh'
[16:14:43.739278] [dll] add_backend: adding backend `ricoh2'
[16:14:43.739294] [dll] add_backend: adding backend `rts8891'
[16:14:43.739310] [dll] add_backend: adding backend `s9036'
[16:14:43.739327] [dll] add_backend: adding backend `sceptre'
[16:14:43.739342] [dll] add_backend: adding backend `sharp'
[16:14:43.739355] [dll] add_backend: adding backend `sm3600'
[16:14:43.739370] [dll] add_backend: adding backend `sm3840'
[16:14:43.739391] [dll] add_backend: adding backend `snapscan'
[16:14:43.739407] [dll] add_backend: adding backend `sp15c'
[16:14:43.739422] [dll] add_backend: adding backend `tamarack'
[16:14:43.739436] [dll] add_backend: adding backend `teco1'
[16:14:43.739450] [dll] add_backend: adding backend `teco2'
[16:14:43.739463] [dll] add_backend: adding backend `teco3'
[16:14:43.739478] [dll] add_backend: adding backend `u12'
[16:14:43.739491] [dll] add_backend: adding backend `umax'
[16:14:43.739506] [dll] add_backend: adding backend `umax1220u'
[16:14:43.739520] [dll] add_backend: adding backend `v4l'
[16:14:43.739540] [dll] add_backend: adding backend `xerox_mfp'
[16:14:43.739581] [dll] sane_get_devices
[16:14:43.739596] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.739610] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[16:14:43.739632] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[16:14:43.739811] [dll] init: initializing backend `xerox_mfp'
[16:14:43.748692] [dll] init: backend `xerox_mfp' is version 1.0.13
[16:14:43.748870] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.748892] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[16:14:43.748916] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[16:14:43.748934] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[16:14:43.748994] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[16:14:43.749012] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[16:14:43.749034] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[16:14:43.749051] [dll] load: couldn't find backend `v4l' (No such file or directory)
[16:14:43.749070] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.749088] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[16:14:43.749113] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[16:14:43.749358] [dll] init: initializing backend `umax1220u'
[16:14:43.757980] [dll] init: backend `umax1220u' is version 1.0.2
[16:14:43.758032] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.758060] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[16:14:43.758095] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[16:14:43.758364] [dll] init: initializing backend `umax'
[16:14:43.768339] [dll] init: backend `umax' is version 1.0.45
[16:14:43.768828] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.768861] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[16:14:43.768889] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[16:14:43.769254] [dll] init: initializing backend `u12'
[16:14:43.777371] [dll] init: backend `u12' is version 1.0.0
[16:14:43.777401] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.777431] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[16:14:43.777456] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[16:14:43.777618] [dll] init: initializing backend `teco3'
[16:14:43.778185] [dll] init: backend `teco3' is version 1.0.1
[16:14:43.778207] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.778224] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[16:14:43.778247] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[16:14:43.778375] [dll] init: initializing backend `teco2'
[16:14:43.779366] [dll] init: backend `teco2' is version 1.0.10
[16:14:43.779390] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.779407] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[16:14:43.779433] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[16:14:43.779573] [dll] init: initializing backend `teco1'
[16:14:43.780138] [dll] init: backend `teco1' is version 1.0.10
[16:14:43.780155] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.780183] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[16:14:43.780207] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[16:14:43.780337] [dll] init: initializing backend `tamarack'
[16:14:43.780616] [dll] init: backend `tamarack' is version 1.0.0
[16:14:43.780633] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.780647] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[16:14:43.780681] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[16:14:43.780798] [dll] init: initializing backend `sp15c'
[16:14:43.780927] [dll] init: backend `sp15c' is version 1.0.0
[16:14:43.780974] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.780989] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[16:14:43.781010] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[16:14:43.781187] [dll] init: initializing backend `snapscan'
[16:14:43.788795] [dll] init: backend `snapscan' is version 1.4.53
[16:14:43.788824] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.788838] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[16:14:43.788859] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[16:14:43.789105] [dll] init: initializing backend `sm3840'
[16:14:43.796488] [dll] init: backend `sm3840' is version 1.0.0
[16:14:43.796531] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.796550] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[16:14:43.796574] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[16:14:43.796847] [dll] init: initializing backend `sm3600'
[16:14:43.804232] [dll] init: backend `sm3600' is version 1.0.6
[16:14:43.804262] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.804292] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[16:14:43.804319] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[16:14:43.804544] [dll] init: initializing backend `sharp'
[16:14:43.804877] [dll] init: backend `sharp' is version 1.0.0
[16:14:43.804894] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.804923] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[16:14:43.804961] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[16:14:43.805075] [dll] init: initializing backend `sceptre'
[16:14:43.805385] [dll] init: backend `sceptre' is version 1.0.10
[16:14:43.805403] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.805428] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[16:14:43.805452] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[16:14:43.805558] [dll] init: initializing backend `s9036'
[16:14:43.805757] [dll] init: backend `s9036' is version 1.0.0
[16:14:43.805774] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.805803] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[16:14:43.805826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[16:14:43.806001] [dll] init: initializing backend `rts8891'
[16:14:43.813392] [dll] init: backend `rts8891' is version 1.0.2401
[16:14:43.813516] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.813544] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[16:14:43.813566] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[16:14:43.813809] [dll] init: initializing backend `ricoh2'
[16:14:43.821060] [dll] init: backend `ricoh2' is version 1.0.0
[16:14:43.821091] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.821106] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[16:14:43.821128] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[16:14:43.821332] [dll] init: initializing backend `ricoh'
[16:14:43.821555] [dll] init: backend `ricoh' is version 1.0.0
[16:14:43.821570] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.821584] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[16:14:43.821604] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[16:14:43.821719] [dll] init: initializing backend `qcam'
[16:14:43.821772] [dll] init: backend `qcam' is version 1.0.0
[16:14:43.821796] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.821815] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[16:14:43.821838] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[16:14:43.822028] [dll] init: initializing backend `plustek'
[16:14:43.829305] [dll] init: backend `plustek' is version 1.0.0
[16:14:43.829327] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:43.829354] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[16:14:43.829378] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[16:14:43.829630] [dll] init: initializing backend `pixma'
[16:14:43.836707] [dll] init: backend `pixma' is version 1.0.27
[16:14:44.358099] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.358157] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[16:14:44.358212] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[16:14:44.358227] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[16:14:44.358252] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[16:14:44.358267] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[16:14:44.358284] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[16:14:44.358299] [dll] load: couldn't find backend `pint' (No such file or directory)
[16:14:44.358313] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.358327] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[16:14:44.358352] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[16:14:44.358646] [dll] init: initializing backend `pieusb'
[16:14:44.366066] [dll] init: backend `pieusb' is version 1.0.1
[16:14:44.367030] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.367071] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[16:14:44.367112] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[16:14:44.367343] [dll] init: initializing backend `pie'
[16:14:44.367822] [dll] init: backend `pie' is version 1.0.9
[16:14:44.367841] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.367869] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[16:14:44.367893] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[16:14:44.368077] [dll] init: initializing backend `niash'
[16:14:44.375502] [dll] init: backend `niash' is version 1.0.1
[16:14:44.375532] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.375559] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[16:14:44.375586] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[16:14:44.375761] [dll] init: initializing backend `nec'
[16:14:44.375993] [dll] init: backend `nec' is version 1.0.0
[16:14:44.376011] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.376025] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[16:14:44.376059] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[16:14:44.376229] [dll] init: initializing backend `mustek_usb2'
[16:14:44.376261] [dll] init: backend `mustek_usb2' is version 1.0.10
[16:14:44.383297] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.383328] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[16:14:44.383354] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[16:14:44.383600] [dll] init: initializing backend `mustek_usb'
[16:14:44.390985] [dll] init: backend `mustek_usb' is version 1.0.18
[16:14:44.391014] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.391042] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[16:14:44.391070] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[16:14:44.391391] [dll] init: initializing backend `mustek'
[16:14:44.391936] [dll] init: backend `mustek' is version 1.0.138
[16:14:44.391954] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.391981] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[16:14:44.392007] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[16:14:44.392133] [dll] init: initializing backend `microtek2'
[16:14:44.392435] [dll] init: backend `microtek2' is version 1.0.0
[16:14:44.392458] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.392489] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[16:14:44.392514] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[16:14:44.392631] [dll] init: initializing backend `microtek'
[16:14:44.392906] [dll] init: backend `microtek' is version 1.0.0
[16:14:44.392923] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.392958] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[16:14:44.392986] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[16:14:44.393102] [dll] init: initializing backend `matsushita'
[16:14:44.393683] [dll] init: backend `matsushita' is version 1.0.7
[16:14:44.393700] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:44.393728] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[16:14:44.393754] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[16:14:44.394766] [dll] init: initializing backend `magicolor'
[16:14:44.402006] [dll] init: backend `magicolor' is version 1.0.1
[16:14:45.904820] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.904869] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[16:14:45.904906] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[16:14:45.905242] [dll] init: initializing backend `ma1509'
[16:14:45.914724] [dll] init: backend `ma1509' is version 1.0.3
[16:14:45.914761] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.914917] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[16:14:45.915031] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[16:14:45.916735] [dll] init: initializing backend `lexmark'
[16:14:45.930006] [dll] init: backend `lexmark' is version 1.0.32
[16:14:45.930133] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.930149] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[16:14:45.930171] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[16:14:45.930388] [dll] init: initializing backend `leo'
[16:14:45.930906] [dll] init: backend `leo' is version 1.0.11
[16:14:45.930983] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.931189] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[16:14:45.931349] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[16:14:45.931731] [dll] init: initializing backend `kvs40xx'
[16:14:45.944603] [dll] init: backend `kvs40xx' is version 1.0.1
[16:14:45.944905] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.944923] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[16:14:45.944987] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[16:14:45.945271] [dll] init: initializing backend `kvs20xx'
[16:14:45.952440] [dll] init: backend `kvs20xx' is version 1.0.2
[16:14:45.952930] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.952973] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[16:14:45.952996] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[16:14:45.953220] [dll] init: initializing backend `kvs1025'
[16:14:45.960474] [dll] init: backend `kvs1025' is version 1.0.5
[16:14:45.960499] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:45.960527] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[16:14:45.960553] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[16:14:46.012247] [dll] init: initializing backend `kodakaio'
[16:14:46.021492] [dll] init: backend `kodakaio' is version 1.0.3
[16:14:47.892461] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.892508] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[16:14:47.892539] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[16:14:47.892772] [dll] init: initializing backend `kodak'
[16:14:47.892793] [dll] init: backend `kodak' is version 1.0.7
[16:14:47.892978] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.892998] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[16:14:47.893019] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[16:14:47.893148] [dll] init: initializing backend `ibm'
[16:14:47.893363] [dll] init: backend `ibm' is version 1.0.0
[16:14:47.893379] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.893393] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[16:14:47.893413] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[16:14:47.893544] [dll] init: initializing backend `hs2p'
[16:14:47.893823] [dll] init: backend `hs2p' is version 1.0.0
[16:14:47.893839] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.893853] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[16:14:47.893873] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[16:14:47.894007] [dll] init: initializing backend `hpsj5s'
[16:14:47.894078] [dll] init: backend `hpsj5s' is version 1.0.3
[16:14:47.894104] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.894122] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[16:14:47.894146] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[16:14:47.894318] [dll] init: initializing backend `hpljm1005'
[16:14:47.901435] [dll] init: backend `hpljm1005' is version 1.0.1
[16:14:47.901460] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.901492] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[16:14:47.901517] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[16:14:47.901751] [dll] init: initializing backend `hp5590'
[16:14:47.909104] [dll] init: backend `hp5590' is version 1.0.8
[16:14:47.909137] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.909159] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[16:14:47.909186] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[16:14:47.909491] [dll] init: initializing backend `hp5400'
[16:14:47.916928] [dll] init: backend `hp5400' is version 1.0.3
[16:14:47.916977] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.916991] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[16:14:47.917017] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[16:14:47.917250] [dll] init: initializing backend `hp4200'
[16:14:47.924404] [dll] init: backend `hp4200' is version 1.0.0
[16:14:47.924431] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.924458] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[16:14:47.924483] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[16:14:47.990692] [dll] init: initializing backend `hp3900'
[16:14:47.999187] [dll] init: backend `hp3900' is version 1.0.0
[16:14:47.999258] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:47.999286] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[16:14:47.999320] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[16:14:47.999623] [dll] init: initializing backend `hp3500'
[16:14:48.007406] [dll] init: backend `hp3500' is version 1.0.0
[16:14:48.007530] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:48.007565] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[16:14:48.007608] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[16:14:48.007958] [dll] init: initializing backend `hp'
[16:14:48.008013] [dll] init: backend `hp' is version 1.0.8
[16:14:48.016005] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:48.016089] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[16:14:48.016127] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[16:14:48.016653] [dll] init: initializing backend `gt68xx'
[16:14:48.024394] [dll] init: backend `gt68xx' is version 1.0.84
[16:14:48.024585] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:48.024603] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[16:14:48.024624] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[16:14:48.025318] [dll] init: initializing backend `genesys'
[16:14:48.033473] [dll] init: backend `genesys' is version 1.0.0
[16:14:48.033649] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:48.033695] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[16:14:48.033739] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[16:14:48.034042] [dll] init: initializing backend `fujitsu'
[16:14:48.034101] [dll] init: backend `fujitsu' is version 1.0.134
[16:14:48.042128] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:48.042160] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[16:14:48.042194] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[16:14:48.187921] [dll] init: initializing backend `escl'
[16:14:48.188261] [dll] init: backend `escl' is version 1.0.0
[16:14:49.197867] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:49.197916] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[16:14:49.197948] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[16:14:49.198297] [dll] init: initializing backend `epsonds'
[16:14:49.205520] [dll] init: backend `epsonds' is version 1.0.0
[16:14:49.205631] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:49.205649] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[16:14:49.205697] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[16:14:49.206019] [dll] init: initializing backend `epson2'
[16:14:49.213426] [dll] init: backend `epson2' is version 1.0.124
[16:14:50.214270] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.214319] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[16:14:50.214348] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[16:14:50.214683] [dll] init: initializing backend `epjitsu'
[16:14:50.214716] [dll] init: backend `epjitsu' is version 1.0.31
[16:14:50.222031] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.222058] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[16:14:50.222088] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[16:14:50.222327] [dll] init: initializing backend `dmc'
[16:14:50.222551] [dll] init: backend `dmc' is version 1.0.0
[16:14:50.222569] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.222582] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[16:14:50.222617] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[16:14:50.222797] [dll] init: initializing backend `dell1600n_net'
[16:14:50.222818] [dll] init: backend `dell1600n_net' is version 1.0.0
[16:14:50.523386] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.523445] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[16:14:50.523511] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[16:14:50.523833] [dll] init: initializing backend `coolscan3'
[16:14:50.530952] [dll] init: backend `coolscan3' is version 1.0.0
[16:14:50.531149] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.531168] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[16:14:50.531191] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[16:14:50.531470] [dll] init: initializing backend `coolscan'
[16:14:50.531771] [dll] init: backend `coolscan' is version 1.0.0
[16:14:50.531788] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.531817] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[16:14:50.531844] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[16:14:50.532007] [dll] init: initializing backend `cardscan'
[16:14:50.539447] [dll] init: backend `cardscan' is version 1.0.3
[16:14:50.539557] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.539577] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[16:14:50.539601] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[16:14:50.539900] [dll] init: initializing backend `canon_dr'
[16:14:50.539939] [dll] init: backend `canon_dr' is version 1.0.58
[16:14:50.547249] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.547273] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[16:14:50.547309] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[16:14:50.547547] [dll] init: initializing backend `canon630u'
[16:14:50.555138] [dll] init: backend `canon630u' is version 1.0.1
[16:14:50.555175] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.555196] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[16:14:50.555225] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[16:14:50.555477] [dll] init: initializing backend `canon'
[16:14:50.555640] [dll] init: backend `canon' is version 1.0.0
[16:14:50.555657] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.555671] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[16:14:50.555698] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[16:14:50.555833] [dll] init: initializing backend `bh'
[16:14:50.556123] [dll] init: backend `bh' is version 1.0.4
[16:14:50.556146] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.556166] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[16:14:50.556191] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[16:14:50.556403] [dll] init: initializing backend `avision'
[16:14:50.568494] [dll] init: backend `avision' is version 1.0.297
[16:14:50.573082] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.573101] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[16:14:50.573123] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[16:14:50.573347] [dll] init: initializing backend `as6e'
[16:14:50.573410] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.573430] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[16:14:50.573458] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[16:14:50.573668] [dll] init: initializing backend `artec_eplus48u'
[16:14:50.580803] [dll] init: backend `artec_eplus48u' is version 1.0.0
[16:14:50.580838] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.580862] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[16:14:50.580888] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[16:14:50.581421] [dll] init: initializing backend `artec'
[16:14:50.581729] [dll] init: backend `artec' is version 1.0.0
[16:14:50.581752] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.581771] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[16:14:50.581796] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[16:14:50.581948] [dll] init: initializing backend `apple'
[16:14:50.582235] [dll] init: backend `apple' is version 1.0.0
[16:14:50.582257] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.582274] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[16:14:50.582298] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[16:14:50.582453] [dll] init: initializing backend `agfafocus'
[16:14:50.582664] [dll] init: backend `agfafocus' is version 1.0.0
[16:14:50.582686] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.582705] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[16:14:50.582730] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[16:14:50.582866] [dll] init: initializing backend `abaton'
[16:14:50.583151] [dll] init: backend `abaton' is version 1.0.0
[16:14:50.583170] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.583189] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[16:14:50.583214] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[16:14:50.583417] [dll] init: initializing backend `net'
[16:14:50.586718] [dll] init: backend `net' is version 1.0.29
[16:14:50.586759] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[16:14:50.586774] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[16:14:50.586816] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[16:14:50.597460] [dll] init: initializing backend `hpaio'
[16:14:50.598773] [dll] init: backend `hpaio' is version 1.0.0
[16:14:52.001439] [dll] sane_get_devices: found 0 devices
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[16:14:52.001489] [dll] sane_exit: exiting
[16:14:52.001503] [dll] sane_exit: calling backend `xerox_mfp's exit function
[16:14:52.001637] [dll] sane_exit: calling backend `umax1220u's exit function
[16:14:52.001713] [dll] sane_exit: calling backend `umax's exit function
[16:14:52.001781] [dll] sane_exit: calling backend `u12's exit function
[16:14:52.001856] [dll] sane_exit: calling backend `teco3's exit function
[16:14:52.001916] [dll] sane_exit: calling backend `teco2's exit function
[16:14:52.001991] [dll] sane_exit: calling backend `teco1's exit function
[16:14:52.002050] [dll] sane_exit: calling backend `tamarack's exit function
[16:14:52.002118] [dll] sane_exit: calling backend `sp15c's exit function
[16:14:52.002179] [dll] sane_exit: calling backend `snapscan's exit function
[16:14:52.002246] [dll] sane_exit: calling backend `sm3840's exit function
[16:14:52.002305] [dll] sane_exit: calling backend `sm3600's exit function
[16:14:52.002377] [dll] sane_exit: calling backend `sharp's exit function
[16:14:52.002434] [dll] sane_exit: calling backend `sceptre's exit function
[16:14:52.002494] [dll] sane_exit: calling backend `s9036's exit function
[16:14:52.002550] [dll] sane_exit: calling backend `rts8891's exit function
[16:14:52.002621] [dll] sane_exit: calling backend `ricoh2's exit function
[16:14:52.002739] [dll] sane_exit: calling backend `ricoh's exit function
[16:14:52.002795] [dll] sane_exit: calling backend `qcam's exit function
[16:14:52.002852] [dll] sane_exit: calling backend `plustek's exit function
[16:14:52.002919] [dll] sane_exit: calling backend `pixma's exit function
[16:14:52.002993] [dll] sane_exit: calling backend `pieusb's exit function
[16:14:52.003052] [dll] sane_exit: calling backend `pie's exit function
[16:14:52.003108] [dll] sane_exit: calling backend `niash's exit function
[16:14:52.003172] [dll] sane_exit: calling backend `nec's exit function
[16:14:52.003230] [dll] sane_exit: calling backend `mustek_usb2's exit function
[16:14:52.003309] [dll] sane_exit: calling backend `mustek_usb's exit function
[16:14:52.003373] [dll] sane_exit: calling backend `mustek's exit function
[16:14:52.003435] [dll] sane_exit: calling backend `microtek2's exit function
[16:14:52.003497] [dll] sane_exit: calling backend `microtek's exit function
[16:14:52.003555] [dll] sane_exit: calling backend `matsushita's exit function
[16:14:52.003612] [dll] sane_exit: calling backend `magicolor's exit function
[16:14:52.003674] [dll] sane_exit: calling backend `ma1509's exit function
[16:14:52.003737] [dll] sane_exit: calling backend `lexmark's exit function
[16:14:52.003827] [dll] sane_exit: calling backend `leo's exit function
[16:14:52.003881] [dll] sane_exit: calling backend `kvs40xx's exit function
[16:14:52.003944] [dll] sane_exit: calling backend `kvs20xx's exit function
[16:14:52.004017] [dll] sane_exit: calling backend `kvs1025's exit function
[16:14:52.004072] [dll] sane_exit: calling backend `kodakaio's exit function
[16:14:52.004133] [dll] sane_exit: calling backend `kodak's exit function
[16:14:52.004194] [dll] sane_exit: calling backend `ibm's exit function
[16:14:52.004253] [dll] sane_exit: calling backend `hs2p's exit function
[16:14:52.004315] [dll] sane_exit: calling backend `hpsj5s's exit function
[16:14:52.004387] [dll] sane_exit: calling backend `hpljm1005's exit function
[16:14:52.004448] [dll] sane_exit: calling backend `hp5590's exit function
[16:14:52.004511] [dll] sane_exit: calling backend `hp5400's exit function
[16:14:52.004568] [dll] sane_exit: calling backend `hp4200's exit function
[16:14:52.004627] [dll] sane_exit: calling backend `hp3900's exit function
[16:14:52.004697] [dll] sane_exit: calling backend `hp3500's exit function
[16:14:52.004762] [dll] sane_exit: calling backend `hp's exit function
[16:14:52.004832] [dll] sane_exit: calling backend `gt68xx's exit function
[16:14:52.004929] [dll] sane_exit: calling backend `genesys's exit function
[16:14:52.005248] [dll] sane_exit: calling backend `fujitsu's exit function
[16:14:52.005319] [dll] sane_exit: calling backend `escl's exit function
[16:14:52.005870] [dll] sane_exit: calling backend `epsonds's exit function
[16:14:52.005929] [dll] sane_exit: calling backend `epson2's exit function
[16:14:52.005989] [dll] sane_exit: calling backend `epjitsu's exit function
[16:14:52.006053] [dll] sane_exit: calling backend `dmc's exit function
[16:14:52.006099] [dll] sane_exit: calling backend `dell1600n_net's exit function
[16:14:52.006226] [dll] sane_exit: calling backend `coolscan3's exit function
[16:14:52.006279] [dll] sane_exit: calling backend `coolscan's exit function
[16:14:52.006330] [dll] sane_exit: calling backend `cardscan's exit function
[16:14:52.006384] [dll] sane_exit: calling backend `canon_dr's exit function
[16:14:52.006449] [dll] sane_exit: calling backend `canon630u's exit function
[16:14:52.006499] [dll] sane_exit: calling backend `canon's exit function
[16:14:52.006548] [dll] sane_exit: calling backend `bh's exit function
[16:14:52.006594] [dll] sane_exit: calling backend `avision's exit function
[16:14:52.006673] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[16:14:52.006724] [dll] sane_exit: calling backend `artec's exit function
[16:14:52.006776] [dll] sane_exit: calling backend `apple's exit function
[16:14:52.006832] [dll] sane_exit: calling backend `agfafocus's exit function
[16:14:52.006891] [dll] sane_exit: calling backend `abaton's exit function
[16:14:52.006934] [dll] sane_exit: calling backend `net's exit function
[16:14:52.007585] [dll] sane_exit: calling backend `hpaio's exit function
[16:14:52.008788] [dll] sane_exit: finishedHada de la Luna :o)
Hors ligne
#9 Le 09/09/2021, à 15:26
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Tu peux nous transmettre le resultat de cette commande :
avahi-browse -ravHors ligne
#10 Le 09/09/2021, à 15:31
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
avahi-browse -rav
Version du serveur : avahi 0.7 ; nom d'hôte : hada-ThinkPad-X200.local
Domaine E Ifce Prot Nom Type
: mémoire cache saturée
+ enp0s25 IPv4 Officejet 4500 G510g-m [6E1FA9] _scanner._tcp local
+ enp0s25 IPv6 HADA-THINKPAD-X200 Microsoft Windows Network local
+ enp0s25 IPv4 Freebox Server Microsoft Windows Network local
+ enp0s25 IPv4 HADA-THINKPAD-X200 Microsoft Windows Network local
+ lo IPv4 HADA-THINKPAD-X200 Microsoft Windows Network local
= enp0s25 IPv6 HADA-THINKPAD-X200 Microsoft Windows Network local
hostname = [hada-ThinkPad-X200.local]
address = [2a01:e0a:8b5:4a60:801c:b6ab:4d7:6c67]
port = [445]
txt = []
= enp0s25 IPv4 Freebox Server Microsoft Windows Network local
hostname = [Freebox-Server.local]
address = [192.168.1.254]
port = [445]
txt = []
= enp0s25 IPv4 HADA-THINKPAD-X200 Microsoft Windows Network local
hostname = [hada-ThinkPad-X200.local]
address = [192.168.1.156]
port = [445]
txt = []
+ enp0s25 IPv4 Freebox Server Web Site local
+ enp0s25 IPv4 Freebox Server _fbx-api._tcp local
+ enp0s25 IPv4 Freebox Server Secure Web Site local
= enp0s25 IPv4 Freebox Server Web Site local
hostname = [Freebox-Server.local]
address = [192.168.1.254]
port = [80]
txt = []
= enp0s25 IPv4 Freebox Server _fbx-api._tcp local
hostname = [Freebox-Server.local]
address = [192.168.1.254]
port = [80]
txt = ["api_domain=zw66dl9k.fbxos.fr" "box_model_name=Freebox v8 (r1)" "box_model=fbxgw8-r1" "https_port=37292" "https_available=1" "uid=5e7446891dafbf005ab9b6f601df2640" "api_base_url=/api/" "device_type=FreeboxServer8,1" "api_version=8.3"]
= enp0s25 IPv4 Freebox Server Secure Web Site local
hostname = [Freebox-Server.local]
address = [192.168.1.254]
port = [443]
txt = []
+ enp0s25 IPv4 Officejet 4500 G510g-m [6E1FA9] PDL Printer local
+ enp0s25 IPv4 Officejet 4500 G510g-m [6E1FA9] Web Site local
= enp0s25 IPv4 Officejet 4500 G510g-m [6E1FA9] _scanner._tcp local
hostname = [HP6E1FA9.local]
address = [192.168.1.176]
port = [9500]
txt = ["feeder=T" "flatbed=T" "button=T" "adminurl=http://HP6E1FA9.local." "mdl=Officejet 4500 G510g-m" "mfg=HP" "ty=Officejet 4500 G510g-m" "txtvers=1"]
= enp0s25 IPv4 Officejet 4500 G510g-m [6E1FA9] PDL Printer local
hostname = [HP6E1FA9.local]
address = [192.168.1.176]
port = [9100]
txt = ["adminurl=http://HP6E1FA9.local." "priority=30" "product=(HP Officejet 4500 G510g-m)" "ty=Officejet 4500 G510g-m" "pdl=application/vnd.hp-PCL" "qtotal=1" "txtvers=1"]
+ enp0s25 IPv6 HPLIP Printer Application Web Site local
+ enp0s25 IPv6 HADA-THINKPAD-X200 _device-info._tcp local
+ enp0s25 IPv6 HPLIP Printer Application _ipps-system._tcp local
+ enp0s25 IPv4 HPLIP Printer Application Web Site local
+ enp0s25 IPv4 HADA-THINKPAD-X200 _device-info._tcp local
+ enp0s25 IPv4 HPLIP Printer Application _ipps-system._tcp local
+ lo IPv4 HPLIP Printer Application Web Site local
+ lo IPv4 HADA-THINKPAD-X200 _device-info._tcp local
+ lo IPv4 HPLIP Printer Application _ipps-system._tcp local
= lo IPv4 HADA-THINKPAD-X200 Microsoft Windows Network local
hostname = [hada-ThinkPad-X200.local]
address = [127.0.0.1]
port = [445]
txt = []
= enp0s25 IPv4 Officejet 4500 G510g-m [6E1FA9] Web Site local
hostname = [HP6E1FA9.local]
address = [192.168.1.176]
port = [80]
txt = []
= enp0s25 IPv6 HPLIP Printer Application Web Site local
hostname = [hada-ThinkPad-X200.local]
address = [2a01:e0a:8b5:4a60:801c:b6ab:4d7:6c67]
port = [8000]
txt = []
= enp0s25 IPv6 HADA-THINKPAD-X200 _device-info._tcp local
hostname = [hada-ThinkPad-X200.local]
address = [2a01:e0a:8b5:4a60:801c:b6ab:4d7:6c67]
port = [0]
txt = ["model=MacSamba"]
= enp0s25 IPv6 HPLIP Printer Application _ipps-system._tcp local
hostname = [hada-ThinkPad-X200.local]
address = [2a01:e0a:8b5:4a60:801c:b6ab:4d7:6c67]
port = [8000]
txt = ["UUID=2320c234-b266-3e52-53d1-238ed328a292"]
= enp0s25 IPv4 HPLIP Printer Application Web Site local
hostname = [hada-ThinkPad-X200.local]
address = [192.168.1.156]
port = [8000]
txt = []
= enp0s25 IPv4 HADA-THINKPAD-X200 _device-info._tcp local
hostname = [hada-ThinkPad-X200.local]
address = [192.168.1.156]
port = [0]
txt = ["model=MacSamba"]
= enp0s25 IPv4 HPLIP Printer Application _ipps-system._tcp local
hostname = [hada-ThinkPad-X200.local]
address = [192.168.1.156]
port = [8000]
txt = ["UUID=2320c234-b266-3e52-53d1-238ed328a292"]
= lo IPv4 HPLIP Printer Application Web Site local
hostname = [hada-ThinkPad-X200.local]
address = [127.0.0.1]
port = [8000]
txt = []
= lo IPv4 HADA-THINKPAD-X200 _device-info._tcp local
hostname = [hada-ThinkPad-X200.local]
address = [127.0.0.1]
port = [0]
txt = ["model=MacSamba"]
= lo IPv4 HPLIP Printer Application _ipps-system._tcp local
hostname = [hada-ThinkPad-X200.local]
address = [127.0.0.1]
port = [8000]
txt = ["UUID=2320c234-b266-3e52-53d1-238ed328a292"]
: c'est tout pour le momentHada de la Luna :o)
Hors ligne
#11 Le 09/09/2021, à 15:45
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
C'est étrange, ton scanner est bien la mais sane ne le sait pas !
Dernier truc a tenter, tu as la version 1.0.29 qui est vieille et qui marchais comme une caserole on va passer a la dernière :
sudo add-apt-repository ppa:sane-project/sane-git
sudo apt-get update
sudo apt install libsane libsane-common sane-utils
scanimage -LHors ligne
#12 Le 09/09/2021, à 15:51
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
sudo add-apt-repository ppa:sane-project/sane-git
[sudo] Mot de passe de hada :
Ubuntu SANE packages from SANE daily git snapshots (http://www.sane-project.org/snapshots/).
Unchanged SANE daily git snapshots are ignored!
Please send scanner related questions to the SANE mailing list:
sane-devel at alioth-lists dot debian dot net.
If you need the last released scanner driver, you can use our other PPA: https://launchpad.net/~sane-project/+archive/ubuntu/sane-release.
Plus d’info : https://launchpad.net/~sane-project/+archive/ubuntu/sane-git
Appuyez sur [ENTRÉE] pour continuer ou sur Ctrl-c pour annuler l'ajout.ENTRÉE ou sur Ctrl-c ? 
Hada de la Luna :o)
Hors ligne
#13 Le 09/09/2021, à 15:52
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
EnterHors ligne
#14 Le 09/09/2021, à 15:58
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).Hada de la Luna :o)
Hors ligne
#15 Le 09/09/2021, à 16:20
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Tu peux donner le resultat ?
sane-find-scannerHors ligne
#16 Le 09/09/2021, à 16:21
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 008:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 007:001: Access denied (insufficient permissions)
could not open USB device 0x1bcf/0x0005 at 006:014: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x17ef/0x480c at 001:003: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x0a5c/0x2145 at 004:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.Hada de la Luna :o)
Hors ligne
#17 Le 09/09/2021, à 16:35
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Ton scanner est supporté depuis un certain temps
Ton réseau est particulier, tu dois avoir des container, ????, verifie si en usb elle fonctionne
Hors ligne
#18 Le 09/09/2021, à 16:38
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
En USB mon imprimante ne fonctionne pas (j'ai déjà essayé) et est trop loin de la Freebox pop
Aucune idée concernant les containers : j'utilise la box pour le réseau
Dernière modification par Hada de la Luna (Le 09/09/2021, à 16:55)
Hada de la Luna :o)
Hors ligne
#19 Le 09/09/2021, à 19:35
- grigouille
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Dans la doc hplip, il est dit de faire :
hp-setup -i ip_imprimanteRemplace ip_imprimante par l'adresse ip de l'imprimante
Dernière modification par grigouille (Le 10/09/2021, à 05:58)
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#20 Le 09/09/2021, à 21:31
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
hp-setup -i ip_imprimante
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ? net
error: Please enter a number between 0 and 1, or "q" to quit.
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 1
Using connection type: net
Setting up device: hp:/net/Officejet_4500_G510g-m?ip=192.168.1.176
---------------------
| PRINT QUEUE SETUP |
---------------------
Please enter a name for this print queue (m=use model name:'Officejet_4500_G510g-m'*, q=quit) ?m
Using queue name: Officejet_4500_G510g-m
Locating PPD file... Please wait.
Found PPD file: hplip:0/ppd/hplip/HP/hp-officejet_4500_g510g-m.ppd
Description:
Note: The model number may vary slightly from the actual model number on the device.
Does this PPD file appear to be the correct one (y=yes*, n=no, q=quit) ? y
Enter a location description for this printer (q=quit) ?HomeOffice
Enter additonal information or notes for this printer (q=quit) ?q
OK, done.Et après ça, c'est bon ? Ou il faut faire autre chose?
Hada de la Luna :o)
Hors ligne
#21 Le 09/09/2021, à 22:06
- grigouille
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
tu testes le scan :
hp-scan -iDebian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#22 Le 09/09/2021, à 22:07
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
hp-scan -i
HP Linux Imaging and Printing System (ver. 3.20.3)
Scan Utility ver. 2.2
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: No device selected/specified or that supports this functionality.Hada de la Luna :o)
Hors ligne
#23 Le 09/09/2021, à 23:08
- Ordissimo1
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Hada de la luna a écrit :
= lo IPv4 HADA-THINKPAD-X200 _device-info._tcp local hostname = [hada-ThinkPad-X200.local] address = [127.0.0.1] port = [0] txt = ["model=MacSamba"] = lo IPv4 HPLIP Printer Application _ipps-system._tcp local hostname = [hada-ThinkPad-X200.local] address = [127.0.0.1] port = [8000] txt = ["UUID=2320c234-b266-3e52-53d1-238ed328a292"
Je parlais de cela, c'est l'adresse local de ton PC, la deuxieme occupe le service
ipps-system._tcp propre au imprimante
Je pense que c'est ton système qui pêche. Pourait tu essayer avec un live Ubuntu 20.04 ou 21.04, normalement tout est present pour que ca fonctionne !
Hors ligne
#24 Le 10/09/2021, à 06:03
- grigouille
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
Oui essaie avec une session live.
Essaie aussi sans le paquet ippusbxd
Tu peux aussi essayer d'ajouter le plugin :
hp-plugin -iDebian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#25 Le 10/09/2021, à 12:47
- Hada de la Luna
Re : 20.04LTS: installation de la fonction scanner de ma HP OfficeJet 4500?
sudo apt purge ippusbxd
[sudo] Mot de passe de hada :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
ippusbxd*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 4 non mis à jour.
Après cette opération, 110 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 227461 fichiers et répertoires déjà installés.)
Suppression de ippusbxd (1.34-2ubuntu1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.1-1) ...
(Lecture de la base de données... 227450 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de ippusbxd (1.34-2ubuntu1) ... hp-plugin -i
HP Linux Imaging and Printing System (ver. 3.20.3)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.20.3)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.3 |
-----------------------------------------
Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recommended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)
Enter option (d=download*, p=specify path, q=quit) ? d
-------------------
| DOWNLOAD PLUGIN |
-------------------
Checking for network connection...
Downloading plug-in from:
Downloading plug-in: [\ ] 0%Importing digital key
----------------------
| INSTALLING PLUG-IN |
----------------------
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.3 Plugin Self Extracting Archive..............................................................
HP Linux Imaging and Printing System (ver. 3.20.3)
Plugin Installer ver. 3.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Plug-in version: 3.20.3
Installed HPLIP version: 3.20.3
Number of files to install: 64
You must agree to the license terms before installing the plug-in:
LICENSE TERMS FOR HP Linux Imaging and Printing (HPLIP) Driver Plug-in
These License Terms govern your Use of the HPLIP Driver Plug-in Software (the "Software"). USE OF THE SOFTWARE INCLUDING, WITHOUT
LIMITATION, ANY DOCUMENTATION, IS SUBJECT TO THESE LICENSE TERMS AND THE APPLICABLE AS-IS WARRANTY STATEMENT. BY DOWNLOADING AND INSTALLING
THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT DOWNLOAD AND INSTALL THE
SOFTWARE ON YOUR SYSTEM.
1. License Grant. HP grants you a license to Use one copy of the Software with HP printing products only. "Use" includes using, storing,
loading, installing, executing, and displaying the Software. You may not modify the Software or disable any licensing or control features of
the Software.
2. Ownership. The Software is owned and copyrighted by HP or its third party suppliers. Your license confers no title to, or ownership in,
the Software and is not a sale of any rights in the Software. HP's third party suppliers may protect their rights in the Software in the
event of any violation of these license terms.
3. Copies and Adaptations. You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an
essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or
adaptations. You may not copy the Software onto any public network.
4. No Disassembly. You may not Disassemble the Software unless HP's prior written consent is obtained. "Disassemble" includes disassembling,
decompiling, decrypting, and reverse engineering. In some jurisdictions, HP's consent may not be required for limited Disassembly. Upon
request, you will provide HP with reasonably detailed information regarding any Disassembly.
5. No Transfer. You may not assign, sublicense or otherwise transfer all or any part of these License Terms or the Software.
6. Termination. HP may terminate your license, upon notice, for failure to comply with any of these License Terms. Upon termination, you
must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
7. Export Requirements. You may not export or re-export the Software or any copy or adaptation in violation of any applicable laws or
regulations.
8. U.S. Government Restricted Rights. The Software has been developed entirely at private expense. It is delivered and licensed, as defined
in any applicable DFARS, FARS, or other equivalent federal agency regulation or contract clause, as either "commercial computer software" or
"restricted computer software", whichever is applicable. You have only those rights provided for such Software by the applicable clause or
regulation or by these License Terms.
9. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH
ALL FAULTS, AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF TITLE AND NON-INFRINGEMENT, ANY IMPLIED WARRANTIES, DUTIES OR CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR
PURPOSE, AND OF LACK OF VIRUSES ALL WITH REGARD TO THE SOFTWARE. Some states/jurisdictions do not allow exclusion of implied warranties or
limitations on the duration of implied warranties, so the above disclaimer may not apply to you in its entirety.
10. LIMITATION OF LIABILITY. Notwithstanding any damages that you might incur, the entire liability of HP and any of its suppliers under any
provision of this agreement and your exclusive remedy for all of the foregoing shall be limited to the greater of the amount actually paid
by you separately for the Software or U.S. $5.00. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HP OR ITS SUPPLIERS
BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER
INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR
INABILITY TO USE THE SOFTWARE, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IF HP OR ANY SUPPLIER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. Some states/jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y
Please enter the sudoer (hada)'s password:
Done.
Done.Et maintenant ?
Hada de la Luna :o)
Hors ligne