Ubuntu-fr

fred-cavernedufond

[RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonjour à tous,

Petit problème technique que je n'arrive pas à résoudre avec mon scanner. Description du problème :
Le scanner est allumé et branché (ça aide et tout fonctionne bien sous Ubuntu. Le scanner semble reconnu par les différents logiciels de numérisation testés. Cependant excepté "Vuescan", il ne numérise rien du tout avec les autres logiciels Linux. Plus précisément, il semble démarrer mais ne fait aucun bruit (on entend pas le petit moteur qui fait bouger la source lumineuse interne du scan') et après quelques secondes d'attente ou la mémoire-tampon semble utilisé, le logiciel de numérisation renvoie une page noire, brouillée, à l'écran. Pas de message d'erreur  ou de "blocage" spécifique.

J'ai fait plusieurs tests avec différents logiciels de numérisation récupérés en snaps : meme problème. J'ai tenté de changer quelques config' internes via les boites de dialogue, telles l'interface [libimage-sane-perl] : rien. POURTANT...le scanner fonctionne très bien avec "Vuescan" exactement dans les mêmes conditions et sous le même OS, sauf que Vuescan génère un filigrane avec la version démo, d’où l'idée d'installer un logiciel sans watermark.

Je ne pense donc pas à un problème de pilote mais plutôt à un réglage spécifique à Linux (?) ou à un problème de fichier de config'. Je remarque que dans les infos renvoyés par le terminal ci dessous je ne vois pas apparaître mon scanner dans les fichiers de config' (?) Dans ce cas, il faudrait peut-être le crée et adapter mon modèle de scanner puis l'insérer dans le bon dossier ubuntu ? La question est alors : comment faire sachant qu'Ubuntu bloque souvent les permissions d'accès ?

Il ne doit pas manquer grand chose mais je ne suis pas spécialiste du sujet et ne fait pas de programmation donc merci de votre aide !
Fred
PS : j'ai des copies-écran mais je ne trouve pas comment uploader des images dans ce messages...ça doit pas etre mon jour

Le matériel :
--------------
scanner Canon 5600F branché en USB 2.0 et auto alimenté.
Ordi de bureau avec 4 Go de RAM
systeme Ubuntu 20.04 LTS à jour
Logiciels de numérisation (testés) : Simple scan ; X-Sane ; GPscan PDF, Vuescan...tous récupérés en snaps.

Autres infos utiles du terminal:
--------------------------------

fred-DESK:~$ dpkg -l | grep sane
.ii  libimage-sane-perl                         5-1                                   amd64        Perl extension for the SANE (Scanner Access Now Easy) Project
ii  libsane:amd64                              1.0.29-0ubuntu5.2                     amd64        API library for scanners
ii  libsane-common                             1.0.29-0ubuntu5.2                     all          API library for scanners -- documentation and support files
ii  libsane-hpaio:amd64                        3.20.3+dfsg0-2                        amd64        HP SANE backend for multi-function peripherals
ii  sane                                       1.0.14-15                             amd64        scanner graphical frontends
ii  sane-utils                                 1.0.29-0ubuntu5.2                     amd64        API library for scanners -- utilities

fred-DESK:~$ sudo sane-find-scanner -q
[sudo] Mot de passe de fred: 
found USB scanner (vendor=0x04a9 [Canon], product=0x1906 [CanoScan], chip=GL847) at libusb:001:005

fred-DESK:~$ scanimage -L
device `genesys:libusb:001:005' is a Canon 5600F flatbed scanner

fred-DESK:~$ ls /etc/sane.d/
abaton.conf          coolscan.conf       genesys.conf   lexmark.conf     pixma.conf       stv680.conf
agfafocus.conf       dc210.conf          gphoto2.conf   ma1509.conf      plustek.conf     tamarack.conf
apple.conf           dc240.conf          gt68xx.conf    magicolor.conf   plustek_pp.conf  teco1.conf
artec.conf           dc25.conf           hp3900.conf    matsushita.conf  qcam.conf        teco2.conf
artec_eplus48u.conf  dell1600n_net.conf  hp4200.conf    microtek2.conf   ricoh.conf       teco3.conf
avision.conf         dll.conf            hp5400.conf    microtek.conf    rts8891.conf     test.conf
bh.conf              dll.d               hp.conf        mustek.conf      s9036.conf       u12.conf
canon630u.conf       dmc.conf            hpsj5s.conf    mustek_pp.conf   saned.conf       umax1220u.conf
canon.conf           epjitsu.conf        hs2p.conf      mustek_usb.conf  sceptre.conf     umax.conf
canon_dr.conf        epson2.conf         ibm.conf       nec.conf         sharp.conf       umax_pp.conf
canon_pp.conf        epson.conf          kodakaio.conf  net.conf         sm3840.conf      xerox_mfp.conf
cardscan.conf        epsonds.conf        kodak.conf     p5.conf          snapscan.conf
coolscan2.conf       escl.conf           kvs1025.conf   pie.conf         sp15c.conf
coolscan3.conf       fujitsu.conf        leo.conf       pieusb.conf      st400.conf

fred-DESK:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
artec
artec_eplus48u
as6e
avision
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc210
#dc240
#dc25
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
escl
fujitsu
genesys
#gphoto2
gt68xx
hp
hp3500
hp3900
hp4200
hp5400
hp5590
hpljm1005
hpsj5s
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
kvs40xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pieusb
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
ricoh2
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
umax1220u
#umax_pp
v4l
xerox_mfp

fred-DESK:~$ ls  /lib/udev/rules.d | grep libsane
60-libsane.rules

# FIN DE DESCRIPTIF.

Dernière modification par fred-cavernedufond (Le 17/11/2021, à 16:20)

---

Fred
Ubuntu 22.04 LTS

xubu1957

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonjour,

Comme demandé dans le premier message du tutoriel Retour utilisable de commande

Pour ajouter toi-même les balises code à ton précédent message #1 :                  Merci         

• Cliquer sur  le lien « Modifier » en bas à droite du message

• Sélectionner le texte

• Cliquer sur le <> de l'éditeur de message

1) Les balises-code sont les < > (crochets bleus) de la barre de mise en forme.

        _ _ _

/!\  Si vous avez plusieurs retours à donner, séparez-les bien (toujours pour la lisibilité) :

comme

cela.

_ _ _

Pour Canon :

Je ne le redirai jamais assez, il faut utiliser le ppa canon: https://doc.ubuntu-fr.org/tutoriel/ppa_canon

> canon mg 3650S scangearmp2 ne fonctionne pas

Dernière modification par xubu1957 (Le 14/02/2022, à 19:22)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

fred-cavernedufond

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Hello,

>Je ne le redirai jamais assez, il faut utiliser le ppa canon: https://doc.ubuntu-fr.org/tutoriel/ppa_canon

1- je vais sur ce lien.

2- je vérifie qu'il existe bien un pilote SANE pour mon scanner (lien "liste des imprimante canon") ce qui m'envoie ici https://doc.ubuntu-fr.org/liste_imprimantes_canon puis dans le n°4 "modèle de scanners" ici : https://doc.ubuntu-fr.org/liste_imprima … s_scanners Raté ! ce n'est pas un Canon "Lide".

3- je vais sur la liste complète en anglais tout en bas : http://www.sane-project.org/sane-mfgs.html
yes !!! il y a bien le Canon scan 5600F en version stable...mais ça se complique : sur la page SANE Genesys backend Homepage /download version stable me renvoie vers http://www.sane-project.org/source.html (pouf pouf de là, vers https://gitlab.com/sane-project/backends qui propose une doc pour l'installation sauf que tout ça c'est bien joli mais ou décompresser tout ce bazar dans mon Ubuntu (s'il me laisse la main) quant au  "quick install" avec un terminal il est a peu près aussi limpide que du javanais. Sorry.

Bref : a) pas simple b) je suis paumé c) toute cette soupe ne me semble pas très orthodoxe pour Linux d) mon scanner ne fonctionne toujours pas mais je sais qu'il y a une soluss quelque part
Note : si je reviens que PPA "scangearMp2" sur cette page https://doc.ubuntu-fr.org/tutoriel/ppa_canon ...il est introuvable.

Pardon mon bon Môssieur, y'a-t-y pas quelqu'un pour m'aider à y voir un peu plus clair ?
Fred

Dernière modification par fred-cavernedufond (Le 06/11/2021, à 17:13)

---

Fred
Ubuntu 22.04 LTS

xubu1957

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonjour,

Je vais demander aux experts.

_ _ _

Note : si je reviens que PPA "scangearMp2" sur cette page https://doc.ubuntu-fr.org/tutoriel/ppa_canon ...il est introuvable.

Dans la page de la Doc, le renvoi en bas de page, pointe sur le lien ppa:thierry-f/fork-michael-gruz

Dernière modification par xubu1957 (Le 06/11/2021, à 18:55)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Ordissimo1

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonjour à tous !
Désolé pour l'attente mais je suis très pris

je te propose de mettre à jour ta version de sane :

sudo add-apt-repository ppa:sane-project/sane-git
sudo apt-get update
sudo apt install libsane libsane-common sane-utils

Une fois ceci terminé, peut tu me donner le retour de la commande :

SANE_DEBUG_DLL=255 scanimage -L

J'attends ton retour !

Thierry

---

Comment reporter un problème d'imprimante ou de scanner?

fred-cavernedufond

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonjour Thierry,
Bonjour à tous,

Ca fonctionne ! J'ai fait les mises à jour de SANE sans problème. Ci-dessous le retour de cmd attendu ou on voit apparaître dans la liste le Canon 5600F.) Avec le "numériseur de doc", le scanner démarre (cette fois bien bruyant, le bétail !) numérise et renvoie l'image impeccable à enregistrer en PDF ou Jpg. Simple et efficace. En revanche et pour info, ça cafouille avec Gscan2PDF : la bécane démarre, numérise le doc ...et bloque. Ca "mouline" pour finir avec un "Gscan2PDF ne réponds pas..." =>  exit. (RAM ?)

Merci à tous pour votre patience et votre aide.
Ubuntu c'est bien !
Fred

fred@MS-7309-DESK:~$ SANE_DEBUG_DLL=255 scanimage -L
[09:15:57.924672] [sanei_debug] Setting debug level of dll to 255.
[09:15:57.924821] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.32.130-3b47
[09:15:57.924845] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[09:15:57.924895] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[09:15:57.924932] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[09:15:57.924966] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[09:15:57.925001] [dll] sane_init/read_config: reading dll.d/hplip
[09:15:57.925037] [dll] add_backend: adding backend `hpaio'
[09:15:57.925213] [dll] sane_init/read_dlld: done.
[09:15:57.925252] [dll] sane_init/read_config: reading dll.conf
[09:15:57.925312] [dll] add_backend: adding backend `net'
[09:15:57.925333] [dll] add_backend: adding backend `abaton'
[09:15:57.925353] [dll] add_backend: adding backend `agfafocus'
[09:15:57.925371] [dll] add_backend: adding backend `apple'
[09:15:57.925419] [dll] add_backend: adding backend `artec'
[09:15:57.925463] [dll] add_backend: adding backend `artec_eplus48u'
[09:15:57.925501] [dll] add_backend: adding backend `as6e'
[09:15:57.925542] [dll] add_backend: adding backend `avision'
[09:15:57.925579] [dll] add_backend: adding backend `bh'
[09:15:57.925622] [dll] add_backend: adding backend `canon'
[09:15:57.925671] [dll] add_backend: adding backend `canon630u'
[09:15:57.925723] [dll] add_backend: adding backend `canon_dr'
[09:15:57.925770] [dll] add_backend: adding backend `canon_lide70'
[09:15:57.925819] [dll] add_backend: adding backend `cardscan'
[09:15:57.925868] [dll] add_backend: adding backend `coolscan'
[09:15:57.925917] [dll] add_backend: adding backend `coolscan3'
[09:15:57.925967] [dll] add_backend: adding backend `dell1600n_net'
[09:15:57.926015] [dll] add_backend: adding backend `dmc'
[09:15:57.926064] [dll] add_backend: adding backend `epjitsu'
[09:15:57.926110] [dll] add_backend: adding backend `epson2'
[09:15:57.926159] [dll] add_backend: adding backend `epsonds'
[09:15:57.926208] [dll] add_backend: adding backend `escl'
[09:15:57.926257] [dll] add_backend: adding backend `fujitsu'
[09:15:57.926306] [dll] add_backend: adding backend `genesys'
[09:15:57.926352] [dll] add_backend: adding backend `gt68xx'
[09:15:57.926397] [dll] add_backend: adding backend `hp'
[09:15:57.926445] [dll] add_backend: adding backend `hp3500'
[09:15:57.926490] [dll] add_backend: adding backend `hp3900'
[09:15:57.926536] [dll] add_backend: adding backend `hp4200'
[09:15:57.926585] [dll] add_backend: adding backend `hp5400'
[09:15:57.926635] [dll] add_backend: adding backend `hp5590'
[09:15:57.926684] [dll] add_backend: adding backend `hpljm1005'
[09:15:57.926733] [dll] add_backend: adding backend `hpsj5s'
[09:15:57.926789] [dll] add_backend: adding backend `hs2p'
[09:15:57.926829] [dll] add_backend: adding backend `ibm'
[09:15:57.926850] [dll] add_backend: adding backend `kodak'
[09:15:57.926870] [dll] add_backend: adding backend `kodakaio'
[09:15:57.926889] [dll] add_backend: adding backend `kvs1025'
[09:15:57.926914] [dll] add_backend: adding backend `kvs20xx'
[09:15:57.926933] [dll] add_backend: adding backend `kvs40xx'
[09:15:57.926952] [dll] add_backend: adding backend `leo'
[09:15:57.926971] [dll] add_backend: adding backend `lexmark'
[09:15:57.926991] [dll] add_backend: adding backend `ma1509'
[09:15:57.927010] [dll] add_backend: adding backend `magicolor'
[09:15:57.927029] [dll] add_backend: adding backend `matsushita'
[09:15:57.927049] [dll] add_backend: adding backend `microtek'
[09:15:57.927068] [dll] add_backend: adding backend `microtek2'
[09:15:57.927087] [dll] add_backend: adding backend `mustek'
[09:15:57.927107] [dll] add_backend: adding backend `mustek_usb'
[09:15:57.927126] [dll] add_backend: adding backend `mustek_usb2'
[09:15:57.927146] [dll] add_backend: adding backend `nec'
[09:15:57.927165] [dll] add_backend: adding backend `niash'
[09:15:57.927187] [dll] add_backend: adding backend `pie'
[09:15:57.927207] [dll] add_backend: adding backend `pieusb'
[09:15:57.927226] [dll] add_backend: adding backend `pint'
[09:15:57.927245] [dll] add_backend: adding backend `pixma'
[09:15:57.927270] [dll] add_backend: adding backend `plustek'
[09:15:57.927291] [dll] add_backend: adding backend `qcam'
[09:15:57.927311] [dll] add_backend: adding backend `ricoh'
[09:15:57.927330] [dll] add_backend: adding backend `ricoh2'
[09:15:57.927350] [dll] add_backend: adding backend `rts8891'
[09:15:57.927370] [dll] add_backend: adding backend `s9036'
[09:15:57.927389] [dll] add_backend: adding backend `sceptre'
[09:15:57.927409] [dll] add_backend: adding backend `sharp'
[09:15:57.927426] [dll] add_backend: adding backend `sm3600'
[09:15:57.927450] [dll] add_backend: adding backend `sm3840'
[09:15:57.927470] [dll] add_backend: adding backend `snapscan'
[09:15:57.927490] [dll] add_backend: adding backend `sp15c'
[09:15:57.927510] [dll] add_backend: adding backend `tamarack'
[09:15:57.927529] [dll] add_backend: adding backend `teco1'
[09:15:57.927549] [dll] add_backend: adding backend `teco2'
[09:15:57.927569] [dll] add_backend: adding backend `teco3'
[09:15:57.927588] [dll] add_backend: adding backend `u12'
[09:15:57.927608] [dll] add_backend: adding backend `umax'
[09:15:57.927625] [dll] add_backend: adding backend `umax1220u'
[09:15:57.927650] [dll] add_backend: adding backend `v4l'
[09:15:57.927670] [dll] add_backend: adding backend `xerox_mfp'
[09:15:57.927722] [dll] sane_get_devices
[09:15:57.927743] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.927764] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[09:15:57.927801] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[09:15:57.928138] [dll] init: initializing backend `xerox_mfp'
[09:15:57.935984] [dll] init: backend `xerox_mfp' is version 1.0.13
[09:15:57.936201] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.936219] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[09:15:57.936241] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[09:15:57.936255] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[09:15:57.936273] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[09:15:57.936286] [dll] load: couldn't find backend `v4l' (No such file or directory)
[09:15:57.936300] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.936314] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[09:15:57.936339] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[09:15:57.936606] [dll] init: initializing backend `umax1220u'
[09:15:57.942080] [dll] init: backend `umax1220u' is version 1.0.2
[09:15:57.942131] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.942149] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[09:15:57.942397] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[09:15:57.942755] [dll] init: initializing backend `umax'
[09:15:57.955348] [dll] init: backend `umax' is version 1.0.45
[09:15:57.955390] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.955408] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[09:15:57.955447] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[09:15:57.955748] [dll] init: initializing backend `u12'
[09:15:57.961822] [dll] init: backend `u12' is version 1.0.0
[09:15:57.961901] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.961919] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[09:15:57.961958] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[09:15:57.962161] [dll] init: initializing backend `teco3'
[09:15:57.964923] [dll] init: backend `teco3' is version 1.0.1
[09:15:57.964959] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.964982] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[09:15:57.965021] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[09:15:57.965287] [dll] init: initializing backend `teco2'
[09:15:57.969399] [dll] init: backend `teco2' is version 1.0.10
[09:15:57.969425] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.969442] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[09:15:57.969480] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[09:15:57.969665] [dll] init: initializing backend `teco1'
[09:15:57.972420] [dll] init: backend `teco1' is version 1.0.10
[09:15:57.972447] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.972464] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[09:15:57.972498] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[09:15:57.972689] [dll] init: initializing backend `tamarack'
[09:15:57.973874] [dll] init: backend `tamarack' is version 1.0.0
[09:15:57.973894] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.973911] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[09:15:57.973941] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[09:15:57.974111] [dll] init: initializing backend `sp15c'
[09:15:57.974563] [dll] init: backend `sp15c' is version 1.0.0
[09:15:57.974583] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.974600] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[09:15:57.974633] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[09:15:57.974871] [dll] init: initializing backend `snapscan'
[09:15:57.982508] [dll] init: backend `snapscan' is version 1.4.53
[09:15:57.982589] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.982616] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[09:15:57.982657] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[09:15:57.982941] [dll] init: initializing backend `sm3840'
[09:15:57.988116] [dll] init: backend `sm3840' is version 1.0.0
[09:15:57.988472] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.988491] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[09:15:57.988538] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[09:15:57.988890] [dll] init: initializing backend `sm3600'
[09:15:57.994246] [dll] init: backend `sm3600' is version 1.0.6
[09:15:57.994325] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.994342] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[09:15:57.994388] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[09:15:57.994637] [dll] init: initializing backend `sharp'
[09:15:57.995884] [dll] init: backend `sharp' is version 1.0.0
[09:15:57.995906] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.995922] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[09:15:57.995955] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[09:15:57.996120] [dll] init: initializing backend `sceptre'
[09:15:57.997752] [dll] init: backend `sceptre' is version 1.0.10
[09:15:57.997788] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.997801] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[09:15:57.997837] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[09:15:57.998032] [dll] init: initializing backend `s9036'
[09:15:57.998868] [dll] init: backend `s9036' is version 1.0.0
[09:15:57.998890] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:57.998911] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[09:15:57.998940] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[09:15:57.999186] [dll] init: initializing backend `rts8891'
[09:15:58.005105] [dll] init: backend `rts8891' is version 1.0.2401
[09:15:58.005280] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.005297] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[09:15:58.005334] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[09:15:58.005608] [dll] init: initializing backend `ricoh2'
[09:15:58.011348] [dll] init: backend `ricoh2' is version 1.0.0
[09:15:58.011397] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.011416] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[09:15:58.011456] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[09:15:58.011716] [dll] init: initializing backend `ricoh'
[09:15:58.012598] [dll] init: backend `ricoh' is version 1.0.0
[09:15:58.012623] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.012640] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[09:15:58.012674] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[09:15:58.012867] [dll] init: initializing backend `qcam'
[09:15:58.012934] [dll] init: backend `qcam' is version 1.0.0
[09:15:58.012958] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.012973] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[09:15:58.013001] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[09:15:58.013239] [dll] init: initializing backend `plustek'
[09:15:58.018972] [dll] init: backend `plustek' is version 1.0.0
[09:15:58.019025] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.019041] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[09:15:58.019075] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[09:15:58.019437] [dll] init: initializing backend `pixma'
[09:15:58.025205] [dll] init: backend `pixma' is version 1.0.28
[09:15:58.546870] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.546975] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[09:15:58.547047] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[09:15:58.547086] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[09:15:58.547128] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[09:15:58.547163] [dll] load: couldn't find backend `pint' (No such file or directory)
[09:15:58.547198] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.547232] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[09:15:58.547338] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[09:15:58.548082] [dll] init: initializing backend `pieusb'
[09:15:58.561329] [dll] init: backend `pieusb' is version 1.0.1
[09:15:58.561370] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.561388] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[09:15:58.561422] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[09:15:58.561661] [dll] init: initializing backend `pie'
[09:15:58.564064] [dll] init: backend `pie' is version 1.0.9
[09:15:58.564169] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.564195] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[09:15:58.564246] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[09:15:58.564552] [dll] init: initializing backend `niash'
[09:15:58.570316] [dll] init: backend `niash' is version 1.0.1
[09:15:58.570362] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.570391] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[09:15:58.570434] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[09:15:58.570706] [dll] init: initializing backend `nec'
[09:15:58.571579] [dll] init: backend `nec' is version 1.0.0
[09:15:58.571602] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.571619] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[09:15:58.571652] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[09:15:58.571904] [dll] init: initializing backend `mustek_usb2'
[09:15:58.571940] [dll] init: backend `mustek_usb2' is version 1.0.10
[09:15:58.581625] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.581669] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[09:15:58.581709] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[09:15:58.582038] [dll] init: initializing backend `mustek_usb'
[09:15:58.587775] [dll] init: backend `mustek_usb' is version 1.0.18
[09:15:58.587822] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.587837] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[09:15:58.587870] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[09:15:58.588261] [dll] init: initializing backend `mustek'
[09:15:58.590186] [dll] init: backend `mustek' is version 1.0.138
[09:15:58.590241] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.590254] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[09:15:58.590290] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[09:15:58.590542] [dll] init: initializing backend `microtek2'
[09:15:58.591757] [dll] init: backend `microtek2' is version 1.0.0
[09:15:58.591780] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.591792] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[09:15:58.591827] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[09:15:58.592034] [dll] init: initializing backend `microtek'
[09:15:58.594385] [dll] init: backend `microtek' is version 1.0.0
[09:15:58.594439] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.594485] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[09:15:58.594543] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[09:15:58.594822] [dll] init: initializing backend `matsushita'
[09:15:58.599227] [dll] init: backend `matsushita' is version 1.0.7
[09:15:58.599324] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:15:58.599355] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[09:15:58.599444] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[09:15:58.601801] [dll] init: initializing backend `magicolor'
[09:15:58.608502] [dll] init: backend `magicolor' is version 1.0.1
[09:16:00.112055] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.112223] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[09:16:00.112331] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[09:16:00.113024] [dll] init: initializing backend `ma1509'
[09:16:00.126509] [dll] init: backend `ma1509' is version 1.0.3
[09:16:00.126569] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.126582] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[09:16:00.126614] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[09:16:00.126916] [dll] init: initializing backend `lexmark'
[09:16:00.133043] [dll] init: backend `lexmark' is version 1.0.32
[09:16:00.133189] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.133214] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[09:16:00.133252] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[09:16:00.133498] [dll] init: initializing backend `leo'
[09:16:00.135382] [dll] init: backend `leo' is version 1.0.11
[09:16:00.135413] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.135433] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[09:16:00.135466] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[09:16:00.135761] [dll] init: initializing backend `kvs40xx'
[09:16:00.141434] [dll] init: backend `kvs40xx' is version 1.0.1
[09:16:00.142619] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.142639] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[09:16:00.142679] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[09:16:00.148309] [dll] init: initializing backend `kvs20xx'
[09:16:00.153596] [dll] init: backend `kvs20xx' is version 1.0.2
[09:16:00.156345] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.156379] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[09:16:00.156452] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[09:16:00.156773] [dll] init: initializing backend `kvs1025'
[09:16:00.162328] [dll] init: backend `kvs1025' is version 1.0.5
[09:16:00.162372] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:00.162391] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[09:16:00.162436] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[09:16:00.163826] [dll] init: initializing backend `kodakaio'
[09:16:00.169421] [dll] init: backend `kodakaio' is version 1.0.3
[09:16:02.100763] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.100865] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[09:16:02.100965] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[09:16:02.101510] [dll] init: initializing backend `kodak'
[09:16:02.101556] [dll] init: backend `kodak' is version 1.0.7
[09:16:02.102793] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.102828] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[09:16:02.102892] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[09:16:02.103290] [dll] init: initializing backend `ibm'
[09:16:02.104631] [dll] init: backend `ibm' is version 1.0.0
[09:16:02.104661] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.104683] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[09:16:02.104726] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[09:16:02.104993] [dll] init: initializing backend `hs2p'
[09:16:02.106676] [dll] init: backend `hs2p' is version 1.0.0
[09:16:02.106702] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.106725] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[09:16:02.106766] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[09:16:02.107019] [dll] init: initializing backend `hpsj5s'
[09:16:02.107152] [dll] init: backend `hpsj5s' is version 1.0.3
[09:16:02.107175] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.107197] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[09:16:02.107240] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[09:16:02.107525] [dll] init: initializing backend `hpljm1005'
[09:16:02.114499] [dll] init: backend `hpljm1005' is version 1.0.1
[09:16:02.114544] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.114563] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[09:16:02.114612] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[09:16:02.114970] [dll] init: initializing backend `hp5590'
[09:16:02.120758] [dll] init: backend `hp5590' is version 1.0.8
[09:16:02.120803] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.120824] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[09:16:02.120863] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[09:16:02.121217] [dll] init: initializing backend `hp5400'
[09:16:02.127081] [dll] init: backend `hp5400' is version 1.0.3
[09:16:02.127126] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.127145] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[09:16:02.127185] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[09:16:02.127499] [dll] init: initializing backend `hp4200'
[09:16:02.133011] [dll] init: backend `hp4200' is version 1.0.0
[09:16:02.133054] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.133072] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[09:16:02.133109] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[09:16:02.133931] [dll] init: initializing backend `hp3900'
[09:16:02.139256] [dll] init: backend `hp3900' is version 1.0.0
[09:16:02.139302] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.139323] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[09:16:02.139363] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[09:16:02.139705] [dll] init: initializing backend `hp3500'
[09:16:02.145259] [dll] init: backend `hp3500' is version 1.0.0
[09:16:02.145319] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.145337] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[09:16:02.145382] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[09:16:02.145791] [dll] init: initializing backend `hp'
[09:16:02.145845] [dll] init: backend `hp' is version 1.0.8
[09:16:02.152615] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.152657] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[09:16:02.152700] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[09:16:02.153085] [dll] init: initializing backend `gt68xx'
[09:16:02.158830] [dll] init: backend `gt68xx' is version 1.0.84
[09:16:02.159044] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.159061] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[09:16:02.159092] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[09:16:02.159879] [dll] init: initializing backend `genesys'
[09:16:02.167106] [dll] init: backend `genesys' is version 1.0.0
[09:16:02.167316] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.167336] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[09:16:02.167368] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[09:16:02.167717] [dll] init: initializing backend `fujitsu'
[09:16:02.167761] [dll] init: backend `fujitsu' is version 1.0.137
[09:16:02.173578] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:02.173623] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[09:16:02.173660] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[09:16:02.198222] [dll] init: initializing backend `escl'
[09:16:02.198392] [dll] init: backend `escl' is version 1.0.0
[09:16:03.204775] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:03.204883] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[09:16:03.205000] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[09:16:03.206869] [dll] init: initializing backend `epsonds'
[09:16:03.219658] [dll] init: backend `epsonds' is version 1.0.0
[09:16:04.226821] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:04.226927] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[09:16:04.227030] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[09:16:04.228324] [dll] init: initializing backend `epson2'
[09:16:04.239980] [dll] init: backend `epson2' is version 1.0.124
[09:16:05.241808] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.241914] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[09:16:05.242040] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[09:16:05.242912] [dll] init: initializing backend `epjitsu'
[09:16:05.243003] [dll] init: backend `epjitsu' is version 1.0.31
[09:16:05.255572] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.255619] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[09:16:05.255668] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[09:16:05.256442] [dll] init: initializing backend `dmc'
[09:16:05.257359] [dll] init: backend `dmc' is version 1.0.0
[09:16:05.257382] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.257395] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[09:16:05.257426] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[09:16:05.257783] [dll] init: initializing backend `dell1600n_net'
[09:16:05.257820] [dll] init: backend `dell1600n_net' is version 1.0.0
[09:16:05.558375] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.558469] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[09:16:05.558591] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[09:16:05.559457] [dll] init: initializing backend `coolscan3'
[09:16:05.570928] [dll] init: backend `coolscan3' is version 1.0.0
[09:16:05.571495] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.571520] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[09:16:05.571554] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[09:16:05.572109] [dll] init: initializing backend `coolscan'
[09:16:05.573908] [dll] init: backend `coolscan' is version 1.0.0
[09:16:05.573947] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.573959] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[09:16:05.574001] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[09:16:05.574405] [dll] init: initializing backend `cardscan'
[09:16:05.579741] [dll] init: backend `cardscan' is version 1.0.3
[09:16:05.579909] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.579927] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[09:16:05.579970] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[09:16:05.580679] [dll] init: initializing backend `canon_lide70'
[09:16:05.586147] [dll] init: backend `canon_lide70' is version 1.0.0
[09:16:05.586214] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.586237] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[09:16:05.586268] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[09:16:05.586679] [dll] init: initializing backend `canon_dr'
[09:16:05.586731] [dll] init: backend `canon_dr' is version 1.0.62
[09:16:05.593106] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.593155] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[09:16:05.593188] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[09:16:05.593582] [dll] init: initializing backend `canon630u'
[09:16:05.599220] [dll] init: backend `canon630u' is version 1.0.1
[09:16:05.599304] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.599334] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[09:16:05.599387] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[09:16:05.599764] [dll] init: initializing backend `canon'
[09:16:05.600313] [dll] init: backend `canon' is version 1.0.0
[09:16:05.600335] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.600392] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[09:16:05.600446] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[09:16:05.600729] [dll] init: initializing backend `bh'
[09:16:05.602007] [dll] init: backend `bh' is version 1.0.4
[09:16:05.602031] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.602043] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[09:16:05.602071] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[09:16:05.602456] [dll] init: initializing backend `avision'
[09:16:05.632339] [dll] init: backend `avision' is version 1.0.297
[09:16:05.656915] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.656962] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[09:16:05.657009] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[09:16:05.657339] [dll] init: initializing backend `as6e'
[09:16:05.657418] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.657443] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[09:16:05.657480] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[09:16:05.657794] [dll] init: initializing backend `artec_eplus48u'
[09:16:05.663238] [dll] init: backend `artec_eplus48u' is version 1.0.0
[09:16:05.663297] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.663315] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[09:16:05.663345] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[09:16:05.663680] [dll] init: initializing backend `artec'
[09:16:05.665395] [dll] init: backend `artec' is version 1.0.0
[09:16:05.665433] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.665451] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[09:16:05.665489] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[09:16:05.665817] [dll] init: initializing backend `apple'
[09:16:05.667032] [dll] init: backend `apple' is version 1.0.0
[09:16:05.667092] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.667109] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[09:16:05.667149] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[09:16:05.667451] [dll] init: initializing backend `agfafocus'
[09:16:05.668343] [dll] init: backend `agfafocus' is version 1.0.0
[09:16:05.668364] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.668381] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[09:16:05.668415] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[09:16:05.668730] [dll] init: initializing backend `abaton'
[09:16:05.669933] [dll] init: backend `abaton' is version 1.0.0
[09:16:05.669956] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.669968] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[09:16:05.670002] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[09:16:05.670407] [dll] init: initializing backend `net'
[09:16:05.674125] [dll] init: backend `net' is version 1.0.32
[09:16:05.674187] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[09:16:05.674201] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[09:16:05.674378] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[09:16:05.676035] [dll] init: initializing backend `hpaio'
[09:16:05.678074] [dll] init: backend `hpaio' is version 1.0.0
[09:16:07.076437] [dll] sane_get_devices: found 1 devices
device `genesys:libusb:001:005' is a Canon CanoScan 5600F flatbed scanner
[09:16:07.076540] [dll] sane_exit: exiting
[09:16:07.076565] [dll] sane_exit: calling backend `xerox_mfp's exit function
[09:16:07.076935] [dll] sane_exit: calling backend `umax1220u's exit function
[09:16:07.077137] [dll] sane_exit: calling backend `umax's exit function
[09:16:07.077339] [dll] sane_exit: calling backend `u12's exit function
[09:16:07.077532] [dll] sane_exit: calling backend `teco3's exit function
[09:16:07.077704] [dll] sane_exit: calling backend `teco2's exit function
[09:16:07.077864] [dll] sane_exit: calling backend `teco1's exit function
[09:16:07.078019] [dll] sane_exit: calling backend `tamarack's exit function
[09:16:07.078173] [dll] sane_exit: calling backend `sp15c's exit function
[09:16:07.078334] [dll] sane_exit: calling backend `snapscan's exit function
[09:16:07.078510] [dll] sane_exit: calling backend `sm3840's exit function
[09:16:07.078687] [dll] sane_exit: calling backend `sm3600's exit function
[09:16:07.078854] [dll] sane_exit: calling backend `sharp's exit function
[09:16:07.079013] [dll] sane_exit: calling backend `sceptre's exit function
[09:16:07.079166] [dll] sane_exit: calling backend `s9036's exit function
[09:16:07.079320] [dll] sane_exit: calling backend `rts8891's exit function
[09:16:07.079492] [dll] sane_exit: calling backend `ricoh2's exit function
[09:16:07.079756] [dll] sane_exit: calling backend `ricoh's exit function
[09:16:07.079911] [dll] sane_exit: calling backend `qcam's exit function
[09:16:07.080060] [dll] sane_exit: calling backend `plustek's exit function
[09:16:07.080296] [dll] sane_exit: calling backend `pixma's exit function
[09:16:07.080545] [dll] sane_exit: calling backend `pieusb's exit function
[09:16:07.080724] [dll] sane_exit: calling backend `pie's exit function
[09:16:07.080892] [dll] sane_exit: calling backend `niash's exit function
[09:16:07.081057] [dll] sane_exit: calling backend `nec's exit function
[09:16:07.081218] [dll] sane_exit: calling backend `mustek_usb2's exit function
[09:16:07.081397] [dll] sane_exit: calling backend `mustek_usb's exit function
[09:16:07.081574] [dll] sane_exit: calling backend `mustek's exit function
[09:16:07.081746] [dll] sane_exit: calling backend `microtek2's exit function
[09:16:07.081911] [dll] sane_exit: calling backend `microtek's exit function
[09:16:07.082068] [dll] sane_exit: calling backend `matsushita's exit function
[09:16:07.082216] [dll] sane_exit: calling backend `magicolor's exit function
[09:16:07.082378] [dll] sane_exit: calling backend `ma1509's exit function
[09:16:07.083322] [dll] sane_exit: calling backend `lexmark's exit function
[09:16:07.083452] [dll] sane_exit: calling backend `leo's exit function
[09:16:07.083531] [dll] sane_exit: calling backend `kvs40xx's exit function
[09:16:07.083612] [dll] sane_exit: calling backend `kvs20xx's exit function
[09:16:07.083693] [dll] sane_exit: calling backend `kvs1025's exit function
[09:16:07.083770] [dll] sane_exit: calling backend `kodakaio's exit function
[09:16:07.083857] [dll] sane_exit: calling backend `kodak's exit function
[09:16:07.083932] [dll] sane_exit: calling backend `ibm's exit function
[09:16:07.084002] [dll] sane_exit: calling backend `hs2p's exit function
[09:16:07.084075] [dll] sane_exit: calling backend `hpsj5s's exit function
[09:16:07.084199] [dll] sane_exit: calling backend `hpljm1005's exit function
[09:16:07.084274] [dll] sane_exit: calling backend `hp5590's exit function
[09:16:07.084353] [dll] sane_exit: calling backend `hp5400's exit function
[09:16:07.084428] [dll] sane_exit: calling backend `hp4200's exit function
[09:16:07.084503] [dll] sane_exit: calling backend `hp3900's exit function
[09:16:07.084594] [dll] sane_exit: calling backend `hp3500's exit function
[09:16:07.084671] [dll] sane_exit: calling backend `hp's exit function
[09:16:07.084755] [dll] sane_exit: calling backend `gt68xx's exit function
[09:16:07.084875] [dll] sane_exit: calling backend `genesys's exit function
[09:16:07.085311] [dll] sane_exit: calling backend `fujitsu's exit function
[09:16:07.085424] [dll] sane_exit: calling backend `escl's exit function
[09:16:07.086360] [dll] sane_exit: calling backend `epsonds's exit function
[09:16:07.086499] [dll] sane_exit: calling backend `epson2's exit function
[09:16:07.086579] [dll] sane_exit: calling backend `epjitsu's exit function
[09:16:07.086650] [dll] sane_exit: calling backend `dmc's exit function
[09:16:07.086721] [dll] sane_exit: calling backend `dell1600n_net's exit function
[09:16:07.086789] [dll] sane_exit: calling backend `coolscan3's exit function
[09:16:07.086855] [dll] sane_exit: calling backend `coolscan's exit function
[09:16:07.086924] [dll] sane_exit: calling backend `cardscan's exit function
[09:16:07.086989] [dll] sane_exit: calling backend `canon_lide70's exit function
[09:16:07.087052] [dll] sane_exit: calling backend `canon_dr's exit function
[09:16:07.087121] [dll] sane_exit: calling backend `canon630u's exit function
[09:16:07.087184] [dll] sane_exit: calling backend `canon's exit function
[09:16:07.087242] [dll] sane_exit: calling backend `bh's exit function
[09:16:07.087300] [dll] sane_exit: calling backend `avision's exit function
[09:16:07.087403] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[09:16:07.087466] [dll] sane_exit: calling backend `artec's exit function
[09:16:07.087529] [dll] sane_exit: calling backend `apple's exit function
[09:16:07.087584] [dll] sane_exit: calling backend `agfafocus's exit function
[09:16:07.087639] [dll] sane_exit: calling backend `abaton's exit function
[09:16:07.087693] [dll] sane_exit: calling backend `net's exit function
[09:16:07.091533] [dll] sane_exit: calling backend `hpaio's exit function
[09:16:07.093117] [dll] sane_exit: finished

---

Fred
Ubuntu 22.04 LTS

Ordissimo1

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonne nouvelle !
Pour info, j'ai mis en place le PDF directement dans l'utilitaire scanimage

1 - Pour la vitre (1 page) :

scanimage --mode=Color --resolution=600 --format=pdf  > test.pdf

2 - Pour le chargeur automatique (Multi pages) :

scanimage --mode=Color --resolution=600 --format=pdf --source=ADF  --batch=test%d.pdf

Gscan2PDF, je connais uniquement de nom

Dernière modification par Ordissimo1 (Le 09/11/2021, à 16:50)

---

Comment reporter un problème d'imprimante ou de scanner?

fred-cavernedufond

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Résolu.
Merci à tous.

---

Fred
Ubuntu 22.04 LTS

xubu1957

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonjour,

Pour éditer ta discussion et rajouter [Résolu] au début du titre, il faut utiliser le bouton Modifier au bas de ton premier message.

Merci

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Ordissimo1

Re : [RESOLU] Probleme fonctionnement scanner Canon 5600F

Bonsoir,
Je vous suggère de mettre à jour votre version de sane, elle est ancienne :

sudo add-apt-repository ppa:sane-project/sane-git
sudo apt-get update
sudo apt install libsane libsane-common sane-utils

Tester le resultat :

sanimage -L

---

Comment reporter un problème d'imprimante ou de scanner?