Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/05/2023, à 10:17

bluc

[Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Bonjour
Je viens d’acquérir un pc d'occasion avec un W10 installé en UEFI
J'ai désactivé le secure boot puis lancé l'installation , mais pas de grub et donc Windows démarre directement au démarrage
J'ai tenté plusieurs installations et toujours pareil
J'ai examiné le système installé et curieusement dans /home/luc c'est vide
La partition efi est bien montée dan le fstab

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=2a397e47-96eb-4b90-8b0b-acc886cb4865 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=B01F-8BAE  /boot/efi       vfat    umask=0077      0       1

Je n'y connais absolument rien en uefi , c'est pour découvrir ce type d'installation que je me suis trouvé cet ordi

Je vous remercie d'avance

Dernière modification par bluc (Le 13/05/2023, à 13:11)


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#2 Le 13/05/2023, à 10:22

iznobe

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Bonjour , pour avoir des infos complètes a nous donner , fournis un boot-info :

sudo add-apt-repository -y ppa:yannubuntu/boot-repair ; sudo apt update ; sudo apt install -y  boot-info ; boot-info

retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#3 Le 13/05/2023, à 10:24

Qid

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

bluc a écrit :

J'ai désactivé le secure boot puis lancé l'installation , mais pas de grub et donc Windows démarre directement au démarrage
J'ai tenté plusieurs installations et toujours pareil

Est-ce que ton live d'installation est bien démarré en efi... C'est ça la vraie question à se poser... Il y a la commande qui va bien pour le déterminer dans la Doc de grub-efi de mémoire...

Nb : j'ai cru comprendre que maintenant en installation automatique même les install non efi créent une partition efi...

Après sinon ce qu'il faut déterminer c'est ta séquence de boot efi (qui peut faire le même job que grub) qui potentiellement a laissé windows en tête alors que grub est bien présent et accessible : regarde pour ça efibootmgr...

Dernière modification par Qid (Le 13/05/2023, à 10:26)


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#4 Le 13/05/2023, à 10:35

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Qid a écrit :

Est-ce que ton live d'installation est bien démarré en efi.

le fait que la partition uefi est montée dans fstab ne veut pas dire ça ?

Je ne sais pas si j'ai bien parametré le bios , voici quelques captures
https://mega.nz/folder/0Y9UkYCR#FP4LquBGw-8jgkZLiGm_Dw

Je vais essayé de faire un boot info , pour le poster il faut simplement cliquer sur pastebin ?
J'attends qu la'installation de je viens de lancer finisse

Dernière modification par bluc (Le 13/05/2023, à 10:37)


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#5 Le 13/05/2023, à 10:45

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#6 Le 13/05/2023, à 10:45

Qid

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

bluc a écrit :
Qid a écrit :

Est-ce que ton live d'installation est bien démarré en efi.

le fait que la partition uefi est montée dans fstab ne veut pas dire ça ?

Dans le doute... En tous cas pour ton bios dans la capture 3 : tu ferais mieux de désactiver l'assistance pour les anciens équipements ce qui t'évitera justement le risque actuel : pas savoir si t'es bien en uefi...
Mais bon tout ça ne nous donne pas la séquence de boot... Regarde efibootmgr je t'ai dit wink


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#7 Le 13/05/2023, à 10:49

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

j'ai essayé et quand je lance le live dans la liste des périphérique uefi ça mets une erreur et W10 se lance
Peut etre faire un live avec autre chose que Ventoy ?


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#8 Le 13/05/2023, à 10:52

Qid

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Il y a surtout que de mémoire il y a une option dans ventoy à activer pour qu'il soit bien efi...


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#9 Le 13/05/2023, à 10:55

iznobe

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

le boot-info :

boot-repair-4ppa203                                              [20230513_0840]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 
    285300408 of the same hard drive for core.img. core.img is at this 
    location and looks for (,gpt5)/boot/grub. It also embeds following 
    components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_gpt biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,2)/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    offsetio extcmd macho elf file gettext boot bufio verifiers crypto 
    terminal normal datetime date mmap drivemap blocklist archelp newc 
    vga_text relocator video chain ntldr search_label search_fs_file 
    search_fs_uuid search keylayouts at_keyboard pci usb usb_keyboard gcry_md5 
    hashsum gcry_crc gzio xzio lzopio lspci fshelp ext2 xfs acpi reboot 
    iso9660 gcry_sha1 div udf exfat font diskfilter raid6rec zstd btrfs ventoy 
    read halt video_fb vbe linux linux16 test true sleep echo bitmap gfxterm 
    bitmap_scale trig video_colors gfxmenu videotest videoinfo functional_test 
    videotest_checksum video_cirrus video_bochs vga minicmd help configfile tr 
    biosdisk disk ls tar zfs squash4 pbkdf2 gcry_sha512 password_pbkdf2 
    all_video png jpeg part_gpt part_msdos fat ntfs loopback 
    gfxterm_background procfs gfxterm_menu smbios
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v1.99-2.00) is installed in the boot sector of 
                       sda1 and looks at sector 285296520 of the same hard 
                       drive for core.img, but core.img can not be found at 
                       this location. No errors found in the Boot Parameter 
                       Block.
    Operating System:  
    Boot files:        /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi 
                       /efi/Boot/fbx64.efi /efi/Boot/grubx64.efi 
                       /efi/Boot/mmx64.efi /efi/ubuntu/grubx64.efi 
                       /efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi 
                       /efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi

sda2: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/10/11/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 10 or 11
    Boot files:        /Windows/System32/winload.exe

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/10/11/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 23.04
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Lunar Lobster (development branch)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       exfat
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   fuse: mount failed: Device or resource busy

sdb2: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Operating System:  
    Boot files:        /boot/grub/grub.cfg


================================ 3 OS detected =================================

OS#1:   Ubuntu 23.04 on sda5
OS#2:   Ubuntu Lunar Lobster (development branch) on sda6
OS#3:   Windows 10 or 11 on sda3

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller from Intel Corporation
Live-session OS is Ubuntu 64-bit (Boot-Repair-Disk 64bit 20200604, bionic, x86_64)

===================================== UEFI =====================================

BIOS/UEFI firmware: L01 v02.57 from Hewlett-Packard
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot disabled (confirmed by mokutil).
BootCurrent: 000B
Timeout: 0 seconds
BootOrder: 0000,0001,0002,000B,0003,0005,0006,0009,000A
Boot0000* Windows Boot Manager	HD(1,GPT,f20af198-cbe2-47ab-95c0-ece00a2f12c9,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* DTO UEFI USB Floppy/CD	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* DTO UEFI USB Hard Drive	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* DTO UEFI ATAPI CD-ROM Drive	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0300000001)..BO
Boot0005* DTO Legacy USB Floppy/CD	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0006* Hard Drive	BBS(HD,,0x0)..GO..NO?.........F.a.k.e. .U.s.b. .O.p.t.i.o.n.................BO..NOw.......+. . . . . . . . .U.S.B. .D.I.S.K. .2...0. . . . .P.M.A.P.........................rN.D+..,.\...........BO..NOu.......+.S.A.T.A. . .P.M.:. .S.T.5.0.0.D.M.0.0.2.-.1.B.D.1.4.2.........................rN.D+..,.\...........BO
Boot0009* IBA GE Slot 00C8 v1550	BBS(Network,,0x0)..BO
Boot000A* CD/DVD Drive 	BBS(CDROM,,0x0)..GO..NO{.......+.S.A.T.A. . .P.M.:. .h.p. . . . . . . .C.D.D.V.D.W. .S.N.-.2.........................rN.D+..,.\...........BO
Boot000B*  USB DISK 2.0 PMAP	PciRoot(0x0)/Pci(0x1a,0x0)/USB(1,0)/USB(1,0)/HD(2,MBR,0xf6ebae74,0x3ab000,0x10000)..BO

64349b3622c65f495a99dbf6102496e3   sda1/Boot/bkpbootx64.efi
64349b3622c65f495a99dbf6102496e3   sda1/Boot/bootx64.efi
0a832cd2c33c8a146b78778df8d33417   sda1/Boot/fbx64.efi
7e494801bb7163fd063f386d7bc75ed8   sda1/Boot/grubx64.efi
abfc1dc97795531c0390328f9dd1a281   sda1/Boot/mmx64.efi
7e494801bb7163fd063f386d7bc75ed8   sda1/ubuntu/grubx64.efi
abfc1dc97795531c0390328f9dd1a281   sda1/ubuntu/mmx64.efi
64349b3622c65f495a99dbf6102496e3   sda1/ubuntu/shimx64.efi
23de89ec237345413d864c8a619d6109   sda1/Microsoft/Boot/bootmgfw.efi
2c5164e838a35dc04aab81860f41e838   sda1/Microsoft/Boot/bootmgr.efi

============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	has-win,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda3	: is-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda4	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda5	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda6	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda3	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda4	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sda5	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda6	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda3	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda4	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda5	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda6	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 4F27C66D-4D9C-408D-8DE5-75411C976F67
          Start       End   Sectors   Size Type
sda1       2048    206847    204800   100M EFI System
sda2     206848    239615     32768    16M Microsoft reserved
sda3     239616 233366881 233127266 111.2G Microsoft basic data
sda4  233367552 234438655   1071104   523M Windows recovery environment
sda5  234438656 290856624  56417969  26.9G Linux filesystem
sda6  290856960 349845241  58988282  28.1G Linux filesystem
Disk sdb: 1.9 GiB, 2002780160 bytes, 3911680 sectors
Disk identifier: 0xf6ebae74
      Boot   Start     End Sectors  Size Id Type
sdb1  *       2048 3846143 3844096  1.9G  7 HPFS/NTFS/exFAT
sdb2       3846144 3911679   65536   32M ef EFI (FAT-12/16/32)
Disk dm-0: 880 MiB, 922746880 bytes, 1802240 sectors
Disk identifier: 0x2c534026
       Boot Start     End Sectors  Size Id Type
dm-0p1 *        0 1802239 1802240  880M  0 Empty
dm-0p2        964    5891    4928  2.4M ef EFI (FAT-12/16/32)
Disk zram0: 960.8 MiB, 1007431680 bytes, 245955 sectors
Disk zram1: 960.8 MiB, 1007431680 bytes, 245955 sectors

parted -lm (filtered): _________________________________________________________

sda:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:119GB:119GB:ntfs:Basic data partition:msftdata;
4:119GB:120GB:548MB:ntfs::hidden, diag;
5:120GB:149GB:28.9GB:ext4::;
6:149GB:179GB:30.2GB:ext4::;
sdb:2003MB:scsi:512:512:msdos: USB DISK 2.0:;
1:1049kB:1969MB:1968MB:::boot;
2:1969MB:2003MB:33.6MB:fat16::esp;

Free space >10MiB: ______________________________________________________________

sda: 170823MiB:476940MiB:306117MiB

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL                  PARTLABEL
sda                                                                                                              
├─sda1 vfat     B01F-8BAE                            f20af198-cbe2-47ab-95c0-ece00a2f12c9                        EFI system partition
├─sda2                                               26a8a40d-ef09-4727-92fd-57bdccad6af4                        Microsoft reserved partition
├─sda3 ntfs     720820FF0820C3C7                     a94c7710-a97f-4da6-9083-3cbb3bb71f51 Windows                Basic data partition
├─sda4 ntfs     BCB4C2BEB4C27B02                     35324838-8e0d-4845-8b09-50a7028298ce                        
├─sda5 ext4     e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd 94598640-5e2d-45f6-9bf2-399f90cb18a3                        
└─sda6 ext4     287719f6-d1c2-4e1a-a4dc-e695b7e649ba 32cf2c74-ac4e-40a9-8c6d-fa9687190611                        
sdb                                                                                                              
├─sdb1 exfat    AF7C-4B25                            f6ebae74-01                          Ventoy                 
└─sdb2 iso9660  2020-06-13-00-42-55-00                                                    Boot-Repair-Disk 64bit 

Mount points (filtered): _______________________________________________________

                    Avail Use% Mounted on
/dev/mapper/ventoy      0 100% /cdrom
/dev/sda1           61.5M  36% /mnt/boot-sav/sda1
/dev/sda3           82.5G  26% /mnt/boot-sav/sda3
/dev/sda4           86.4M  83% /mnt/boot-sav/sda4
/dev/sda5           16.5G  32% /mnt/boot-sav/sda5
/dev/sda6           15.9G  37% /mnt/boot-sav/sda6
/dev/sdb2               0 100% /media/lubuntu/Boot-Repair-Disk 64bit

Mount options (filtered): ______________________________________________________


===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd root hd0,gpt5 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sda5/boot/grub/grub.cfg (filtered) ======================

Ubuntu   e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd
Ubuntu, with Linux 6.2.0-20-generic   e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd
Ubuntu Lunar Lobster (development branch) (23.04) (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-20-generic (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-19-generic (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda5/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=B01F-8BAE  /boot/efi       vfat    umask=0077      0       1

======================= sda5/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda5: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 136.043594360 = 146.075697152  boot/grub/grub.cfg                             1
 136.041858673 = 146.073833472  boot/grub/i386-pc/core.img                     1
 116.919776917 = 125.541654528  boot/vmlinuz                                   2
 116.919776917 = 125.541654528  boot/vmlinuz-6.2.0-20-generic                  2
 134.009258270 = 143.891345408  boot/initrd.img                                1
 134.009258270 = 143.891345408  boot/initrd.img-6.2.0-20-generic               1
 134.009258270 = 143.891345408  boot/initrd.img.old                            1

===================== sda5: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Dec  9 16:11 10_linux
-rwxr-xr-x 1 root root 43263 Dec  9 16:11 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec  9 16:11 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec  9 16:11 30_os-prober
-rwxr-xr-x 1 root root  1372 Dec  9 16:11 30_uefi-firmware
-rwxr-xr-x 1 root root   722 Feb 26 17:05 35_fwupd
-rwxr-xr-x 1 root root   214 Dec  9 16:11 40_custom
-rwxr-xr-x 1 root root   215 Dec  9 16:11 41_custom

====================== sda6/boot/grub/grub.cfg (filtered) ======================

Ubuntu   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-20-generic   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-19-generic   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu 23.04 (23.04) (on sda5)   0cdfcd8b-db3c-4acd-a972-73da10955dd5
Ubuntu (on sda5)   0cdfcd8b-db3c-4acd-a972-73da10955dd5
Ubuntu, with Linux 6.2.0-20-generic (on sda5)   0cdfcd8b-db3c-4acd-a972-73da10955dd5
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda6/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=287719f6-d1c2-4e1a-a4dc-e695b7e649ba /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=B01F-8BAE  /boot/efi       vfat    umask=0077      0       1

======================= sda6/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda6: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 142.826427460 = 153.358708736  boot/grub/grub.cfg                             1
 140.126499176 = 150.459682816  boot/grub/i386-pc/core.img                     1
 158.158058167 = 169.820921856  boot/vmlinuz                                   1
 145.329292297 = 156.046139392  boot/vmlinuz-6.2.0-19-generic                  1
 158.158058167 = 169.820921856  boot/vmlinuz-6.2.0-20-generic                  1
 145.329292297 = 156.046139392  boot/vmlinuz.old                               1
 159.208465576 = 170.948788224  boot/initrd.img                                1
 157.757904053 = 169.391259648  boot/initrd.img-6.2.0-19-generic               1
 159.208465576 = 170.948788224  boot/initrd.img-6.2.0-20-generic               1
 157.757904053 = 169.391259648  boot/initrd.img.old                            1

===================== sda6: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Dec  9 16:11 10_linux
-rwxr-xr-x 1 root root 43263 Dec  9 16:11 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec  9 16:11 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec  9 16:11 30_os-prober
-rwxr-xr-x 1 root root  1372 Dec  9 16:11 30_uefi-firmware
-rwxr-xr-x 1 root root   722 Feb 26 17:05 35_fwupd
-rwxr-xr-x 1 root root   214 Dec  9 16:11 40_custom
-rwxr-xr-x 1 root root   215 Dec  9 16:11 41_custom

====================== sdb2/boot/grub/grub.cfg (filtered) ======================


==================== sdb2: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
            ?? = ??             boot/grub/grub.cfg                             1



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub-efi of
sda5,
using the following options:  sda1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups

Final advice in case of suggested repair: ______________________________________

Please do not forget to make your UEFI firmware boot on the Ubuntu 23.04 entry (sda1/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)

retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#10 Le 13/05/2023, à 10:55

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Cette fenetre ne veut pas dire que c'est en uefi

Dernière modification par bluc (Le 13/05/2023, à 10:55)


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#11 Le 13/05/2023, à 10:56

iznobe

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Dans le boot in fo , on y voit :

===================================== UEFI =====================================

BIOS/UEFI firmware: L01 v02.57 from Hewlett-Packard
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.

l ' image est trop petite .


Pour les captures de ton BIOS , aucune est utile sur les 5 que tu montres , pour connaître les réglages du mode EFI / LEGACY .

il faut au moins qu ' on voit l ' onglet boot / demarrage et un autre dans lequel tu choisis le mode de lancement de l' ordinateur en UEFI / CSM / LEGACY . il est par defaut sur CSM , il faut le changer .

Dernière modification par iznobe (Le 13/05/2023, à 10:59)


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#12 Le 13/05/2023, à 11:00

Qid

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

iznobe a écrit :

Dans le boot in fo , on y voit :

===================================== UEFI =====================================

BIOS/UEFI firmware: L01 v02.57 from Hewlett-Packard
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.

Mouais par contre le retour d'efibootmgr qui va avec n'est pas aussi clair que d'habitude...


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#13 Le 13/05/2023, à 11:07

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

c'est un pc professionnel , c'est peut etre la cause


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#14 Le 13/05/2023, à 11:13

iznobe

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

bon alors en fait tu utilises une vieille version du logiciel boot repair :

boot-repair-4ppa203   

c' est pour cela que ce n' est pas aussi clair que d  ' habitude .
redonne un vrai boot-info a jour en suivant le paragraphe 1 de la doc stp .

A priori , l ' efibootmgr , correspond bien a ce qui se passe sur l' ordinateur lorsque tu redemarres , pas de grub et lancement de windows , pas d ' ubuntu dans les choix possibles .


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#15 Le 13/05/2023, à 11:13

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

iznobe a écrit :

l ' image est trop petite .

Ce n''est pas une capture que j'ai faite , mais j'ai cru comprendre que quand cette fenêtre apparaissait c'était la preuve que on etait en uefi
Bien que la premiere ligne semble un peu différente


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#16 Le 13/05/2023, à 11:33

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

j'espere que c'est bon pour le boot info

https://paste.ubuntu.com/p/Mjky624KDC/


boot-repair-4ppa203                                              [20230513_0929]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 
    285300408 of the same hard drive for core.img. core.img is at this 
    location and looks for (,gpt5)/boot/grub. It also embeds following 
    components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_gpt biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,2)/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    offsetio extcmd macho elf file setkey gettext boot bufio verifiers crypto 
    terminal normal datetime date mmap drivemap blocklist regexp archelp newc 
    vga_text relocator video chain ntldr search_label search_fs_file 
    search_fs_uuid search keylayouts at_keyboard pci usb usb_keyboard gcry_md5 
    hashsum gcry_crc gzio xzio lzopio lspci fshelp ext2 xfs acpi iso9660 
    gcry_sha1 div udf exfat font diskfilter raid6rec zstd btrfs ventoy read 
    halt video_fb vbe linux linux16 test true sleep reboot echo bitmap 
    bitmap_scale gfxterm trig video_colors gfxmenu videotest videoinfo 
    functional_test videotest_checksum video_cirrus video_bochs vga minicmd 
    help configfile tr biosdisk disk ls tar zfs squash4 pbkdf2 gcry_sha512 
    password_pbkdf2 all_video png jpeg part_gpt part_msdos fat ntfs loopback 
    gfxterm_background procfs gfxterm_menu smbios
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v1.99-2.00) is installed in the boot sector of 
                       sda1 and looks at sector 285296520 of the same hard 
                       drive for core.img, but core.img can not be found at 
                       this location. No errors found in the Boot Parameter 
                       Block.
    Operating System:  
    Boot files:        /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi 
                       /efi/Boot/fbx64.efi /efi/Boot/grubx64.efi 
                       /efi/Boot/mmx64.efi /efi/ubuntu/grubx64.efi 
                       /efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi 
                       /efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi

sda2: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/10/11/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 10 or 11
    Boot files:        /Windows/System32/winload.exe

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/10/11/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 23.04
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Lunar Lobster (development branch)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       exfat
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sdb1: /dev/sdb1 déjà monté ou point de montage actif.
       dmesg(1) may have more information after failed mount system call.

sdb2: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v1.99-2.00) is installed in the boot sector of 
                       sdb2 and looks at sector 0 of the same hard drive for 
                       core.img, but core.img can not be found at this 
                       location.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg


================================ 3 OS detected =================================

OS#1:   Ubuntu 23.04 on sda5
OS#2:   Ubuntu Lunar Lobster (development branch) on sda6
OS#3:   Windows 10 or 11 on sda3

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller from Intel Corporation
Live-session OS is Ubuntu 64-bit (Ubuntu 23.04, lunar, x86_64)

===================================== UEFI =====================================

BIOS/UEFI firmware: L01 v02.57(2.57) from Hewlett-Packard
The firmware is EFI-compatible, but this live-session is in Legacy/BIOS/CSM mode (not in EFI mode).


64349b3622c65f495a99dbf6102496e3   sda1/Boot/bkpbootx64.efi
64349b3622c65f495a99dbf6102496e3   sda1/Boot/bootx64.efi
0a832cd2c33c8a146b78778df8d33417   sda1/Boot/fbx64.efi
7e494801bb7163fd063f386d7bc75ed8   sda1/Boot/grubx64.efi
abfc1dc97795531c0390328f9dd1a281   sda1/Boot/mmx64.efi
7e494801bb7163fd063f386d7bc75ed8   sda1/ubuntu/grubx64.efi
abfc1dc97795531c0390328f9dd1a281   sda1/ubuntu/mmx64.efi
64349b3622c65f495a99dbf6102496e3   sda1/ubuntu/shimx64.efi
23de89ec237345413d864c8a619d6109   sda1/Microsoft/Boot/bootmgfw.efi
2c5164e838a35dc04aab81860f41e838   sda1/Microsoft/Boot/bootmgr.efi

============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sdb	: notGPT,	no-BIOSboot,	has-noESP, 	usb-disk,	not-mmc, no-os,	no-wind,	2048 sectors * 512 bytes
sda	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	has-win,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sdb1	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda4	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda5	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda3	: is-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda1	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda6	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios

Partitions info (2/3): _________________________________________________________

sdb1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda4	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sda5	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda3	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda6	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sdb1	: maybesepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sdb
sda4	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda5	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda3	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda1	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda6	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 4F27C66D-4D9C-408D-8DE5-75411C976F67
          Start       End   Sectors   Size Type
sda1       2048    206847    204800   100M EFI System
sda2     206848    239615     32768    16M Microsoft reserved
sda3     239616 233366881 233127266 111.2G Microsoft basic data
sda4  233367552 234438655   1071104   523M Windows recovery environment
sda5  234438656 290856624  56417969  26.9G Linux filesystem
sda6  290856960 349845241  58988282  28.1G Linux filesystem
Disk sdb: 14.56 GiB, 15634251776 bytes, 30535648 sectors
Disk identifier: 0x53f31a59
      Boot    Start      End  Sectors  Size Id Type
sdb1  *        2048 30470111 30468064 14.5G  7 HPFS/NTFS/exFAT
sdb2       30470112 30535647    65536   32M ef EFI (FAT-12/16/32)
Disk mapper/ventoy: 3.03 GiB, 3252484096 bytes, 6352508 sectors
Disk identifier: 3009487E-C629-4CAB-9345-B3CFFA2FE452
                      Start     End Sectors  Size Type
mapper/ventoy-part1      64 6341775 6341712    3G Microsoft basic data
mapper/ventoy-part2 6341776 6351843   10068  4.9M EFI System
mapper/ventoy-part3 6351844 6352443     600  300K Microsoft basic data

parted -lm (filtered): _________________________________________________________

sda:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:119GB:119GB:ntfs:Basic data partition:msftdata;
4:119GB:120GB:548MB:ntfs::hidden, diag;
5:120GB:149GB:28.9GB:ext4::;
6:149GB:179GB:30.2GB:ext4::;
sdb:15.6GB:scsi:512:512:msdos:Verbatim STORE N GO:;
1:1049kB:15.6GB:15.6GB:::boot;
2:15.6GB:15.6GB:33.6MB:fat16::esp;
mapper/ventoy:3252MB:dm:512:512:gpt:Linux device-mapper (linear):;
1:32.8kB:3247MB:3247MB::ISO9660:hidden, msftdata;
2:3247MB:3252MB:5155kB::Appended2:boot, esp;
3:3252MB:3252MB:307kB::Gap1:hidden, msftdata;

Free space >10MiB: ______________________________________________________________

sda: 170823MiB:476940MiB:306117MiB

blkid (filtered): ______________________________________________________________

NAME       FSTYPE   UUID                                 PARTUUID                             LABEL   PARTLABEL
sda                                                                                                   
├─sda1     vfat     B01F-8BAE                            f20af198-cbe2-47ab-95c0-ece00a2f12c9         EFI system partition
├─sda2                                                   26a8a40d-ef09-4727-92fd-57bdccad6af4         Microsoft reserved partition
├─sda3     ntfs     720820FF0820C3C7                     a94c7710-a97f-4da6-9083-3cbb3bb71f51 Windows Basic data partition
├─sda4     ntfs     BCB4C2BEB4C27B02                     35324838-8e0d-4845-8b09-50a7028298ce         
├─sda5     ext4     e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd 94598640-5e2d-45f6-9bf2-399f90cb18a3         
└─sda6     ext4     287719f6-d1c2-4e1a-a4dc-e695b7e649ba 32cf2c74-ac4e-40a9-8c6d-fa9687190611         
sdb                                                                                                   
├─sdb1     exfat    EA0E-0C33                            53f31a59-01                          Ventoy  
│ └─ventoy                                                                                            
└─sdb2                                                                                                

Mount points (filtered): _______________________________________________________

                           Avail Use% Mounted on
/dev/mapper/ventoy             0 100% /cdrom
/dev/sda1                  61.5M  36% /mnt/boot-sav/sda1
/dev/sda3                  82.5G  26% /mnt/boot-sav/sda3
/dev/sda4                  86.4M  83% /mnt/boot-sav/sda4
/dev/sda5                  16.5G  32% /mnt/boot-sav/sda5
/dev/sda6                  15.8G  37% /mnt/boot-sav/sda6

Mount options (filtered): ______________________________________________________


============================== ls -R /dev/mapper/ ==============================

/dev/mapper:
control
ventoy

===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd root hd0,gpt5 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sda5/boot/grub/grub.cfg (filtered) ======================

Ubuntu   e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd
Ubuntu, with Linux 6.2.0-20-generic   e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd
Ubuntu Lunar Lobster (development branch) (23.04) (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-20-generic (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-19-generic (on sda6)   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda5/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=e6e2e05c-8ce9-4bdd-a1dd-f2423991cfbd /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=B01F-8BAE  /boot/efi       vfat    umask=0077      0       1

======================= sda5/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda5: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 136,043594360 = 146,075697152  boot/grub/grub.cfg                             1
 136,041858673 = 146,073833472  boot/grub/i386-pc/core.img                     1
 116,919776917 = 125,541654528  boot/vmlinuz                                   2
 116,919776917 = 125,541654528  boot/vmlinuz-6.2.0-20-generic                  2
 134,009258270 = 143,891345408  boot/initrd.img                                1
 134,009258270 = 143,891345408  boot/initrd.img-6.2.0-20-generic               1
 134,009258270 = 143,891345408  boot/initrd.img.old                            1

===================== sda5: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Dec  9 16:11 10_linux
-rwxr-xr-x 1 root root 43263 Dec  9 16:11 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec  9 16:11 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec  9 16:11 30_os-prober
-rwxr-xr-x 1 root root  1372 Dec  9 16:11 30_uefi-firmware
-rwxr-xr-x 1 root root   722 Feb 26 17:05 35_fwupd
-rwxr-xr-x 1 root root   214 Dec  9 16:11 40_custom
-rwxr-xr-x 1 root root   215 Dec  9 16:11 41_custom

====================== sda6/boot/grub/grub.cfg (filtered) ======================

Ubuntu   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-20-generic   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu, with Linux 6.2.0-19-generic   287719f6-d1c2-4e1a-a4dc-e695b7e649ba
Ubuntu 23.04 (23.04) (on sda5)   0cdfcd8b-db3c-4acd-a972-73da10955dd5
Ubuntu (on sda5)   0cdfcd8b-db3c-4acd-a972-73da10955dd5
Ubuntu, with Linux 6.2.0-20-generic (on sda5)   0cdfcd8b-db3c-4acd-a972-73da10955dd5
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda6/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=287719f6-d1c2-4e1a-a4dc-e695b7e649ba /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=B01F-8BAE  /boot/efi       vfat    umask=0077      0       1

======================= sda6/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda6: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 142,826427460 = 153,358708736  boot/grub/grub.cfg                             1
 140,126499176 = 150,459682816  boot/grub/i386-pc/core.img                     1
 158,158058167 = 169,820921856  boot/vmlinuz                                   1
 145,329292297 = 156,046139392  boot/vmlinuz-6.2.0-19-generic                  1
 158,158058167 = 169,820921856  boot/vmlinuz-6.2.0-20-generic                  1
 145,329292297 = 156,046139392  boot/vmlinuz.old                               1
 159,208465576 = 170,948788224  boot/initrd.img                                1
 157,757904053 = 169,391259648  boot/initrd.img-6.2.0-19-generic               1
 159,208465576 = 170,948788224  boot/initrd.img-6.2.0-20-generic               1
 157,757904053 = 169,391259648  boot/initrd.img.old                            1

===================== sda6: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Dec  9 16:11 10_linux
-rwxr-xr-x 1 root root 43263 Dec  9 16:11 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec  9 16:11 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec  9 16:11 30_os-prober
-rwxr-xr-x 1 root root  1372 Dec  9 16:11 30_uefi-firmware
-rwxr-xr-x 1 root root   722 Feb 26 17:05 35_fwupd
-rwxr-xr-x 1 root root   214 Dec  9 16:11 40_custom
-rwxr-xr-x 1 root root   215 Dec  9 16:11 41_custom

====================== sdb2/boot/grub/grub.cfg (filtered) ======================

Try or Install Xubuntu
Xubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
Test memory

==================== sdb2: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
            ?? = ??             boot/grub/grub.cfg                             1

================================= User choice ==================================

Is there RAID on this computer? no



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub-efi of
sda5,
using the following options:  sda1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups

Blockers in case of suggested repair: __________________________________________

The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. 

Final advice in case of suggested repair: ______________________________________

Please do not forget to make your UEFI firmware boot on the Ubuntu 23.04 entry (sda1/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.

Dernière modification par bluc (Le 13/05/2023, à 11:36)


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#17 Le 13/05/2023, à 11:43

Compte supprimé

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Bonjour,
Pour le premier rapport :
Dans le retour de efibootmgr, windows est en priorité de démarrage et je ne vois pas d'option pour un Ubuntu en UEFI.
Dans le second

The firmware is EFI-compatible, but this live-session is in Legacy/BIOS/CSM mode (not in EFI mode).

Il faut choisir un mode dans la BIOS et s'y tenir. Vu l'objectif de bluc, passer en UEFI seul.

Dernière modification par Compte supprimé (Le 13/05/2023, à 11:47)

#18 Le 13/05/2023, à 12:05

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

pourtant le bios est en français , mais je ne sais pas vraiment ce qu'il faut faire

https://mega.nz/folder/0Y9UkYCR#FP4LquBGw-8jgkZLiGm_Dw


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#19 Le 13/05/2023, à 12:15

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Merci a tous de consacré du temps

pourtant la dernière installation a été faite avec ce paramétrage
1683972858.jpg

Je vais essayer avec un live fait différemment

Dernière modification par bluc (Le 13/05/2023, à 12:17)


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#20 Le 13/05/2023, à 12:18

Qid

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

bluc a écrit :

pourtant la dernière installation a été faite avec ce paramétrage
https://pix.cyber-nux.fr/upload/thumb/1683972858.jpg

Oui bah justement... Je t'ai dit que ça ne devait pas être actif et que c'était ta clé ventoy qu'il fallait aussi reconfigurer pour qu'elle prenne bien en charge l'uefi... wink


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#21 Le 13/05/2023, à 12:25

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Là je ne sais pas comment paramétrer ça , mais toute façons trop tard j'ai refait avec Createur de disque , si ça ne vas pas je referai avec Ventoy


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#22 Le 13/05/2023, à 12:49

Compte supprimé

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Qid a écrit :

: tu ferais mieux de désactiver l'assistance pour les anciens équipements ce qui t'évitera justement le risque actuel : pas savoir si t'es bien en uefi...

Ce n'est pas encore fait.

#23 Le 13/05/2023, à 13:11

bluc

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Ça y est , ça a fonctionné sans rien modifier d'autres dans le bios , avec un live créé avec Créateur de disque
Je pense que le fichier EFI de Ventoy était corrompu , il avait pas loin d'un an et j'ai réalisé des dizaines de lives de linux et Windows de toutes lles couleurs

Merci a tous pour votre aide  wink


Clevo :  Ubuntu 23.10   ❖  Xubuntu 22.10  ❖  Kubuntu 23.10   
         avec partition data commune       Une fraction de seconde                    Multiboot

Hors ligne

#24 Le 13/05/2023, à 13:13

Qid

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Ouais... Le support Ventoy il faut aussi le mettre à jour de temps en temps... D'autant que les mises à jour de ce logiciel sont très fréquentes...


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#25 Le 13/05/2023, à 13:20

Compte supprimé

Re : [Résolu] Installation d'ubuntu qui ne fonctionne pas en UEFI

Bravo, vu que ça marche !
Mais dans quel mode as-tu installé ?

Avant de refaire ta clé Ventoy, tu peux tester une installation, en VM par exemple, il se pourrait bien que tout fonctionne cool
Si ça marchait avant et qu'elle démarre bien, il faudrait que le fichier de l'iso Ubuntu se soit soudainement corrompu tongue

Dernière modification par Compte supprimé (Le 13/05/2023, à 13:23)