#1 Le 13/12/2023, à 12:22
- ar barzh paour
[Résolu] changement de carte mère : disque non bootable
bonjour tout le monde
j'ai un gros souci de boot
ma carte mère a cramé j'ai donc été obligé de la changer
sauf que maintenant
je n'arrive plus à booter sur le disque 250G0 que j'utilisais avant (22.04) , si je ne branche que ce disque , j'ai l' erreur : pas de disque bootable
par contre si j'ajoute un 2ème disque (500Go) le PC boote sur une version 18.04 installée sur celui-ci
le disque non bootable est reconnu , je retrouve toutes ses partitions , mais je ne peux pas booter dessus
avant
je pouvais booter sur n'importe quel OS installé sur un de mes 5 disques , ( de 16.04 à 23.04 )
lshw avec les deux disques branchés
celui qui boot est le disque dev/sda
sudo lshw
description: Ordinateur de Bureau
produit: B760M DS3H DDR4 (Default string)
fabriquant: Gigabyte Technology Co., Ltd.
version: Default string
numéro de série: Default string
bits: 64 bits
fonctionnalités: smbios-3.5 dmi-3.5 smp vsyscall32
configuration: boot=normal chassis=desktop family=B760 MB sku=Default string uuid=74025603-3C04-9305-DF06-7E0700080009
*-core
description: Carte mère
produit: B760M DS3H DDR4
fabriquant: Gigabyte Technology Co., Ltd.
identifiant matériel: 0
version: x.x
numéro de série: Default string
emplacement: Default string
*-firmware
description: BIOS
fabriquant: American Megatrends International, LLC.
identifiant matériel: 0
version: F11
date: 06/06/2023
taille: 64KiB
capacité: 15MiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int14serial int17printer int10video acpi usb biosbootspecification uefi
*-memory
description: Mémoire Système
identifiant matériel: 3b
emplacement: Carte mère
taille: 8GiB
*-bank:0
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 0
emplacement: Controller0-ChannelA-DIMM0
*-bank:1
description: DIMM DDR4 Synchrone 2400 MHz (0,4 ns)
produit: KF3200C16D4/8GX
fabriquant: Kingston
identifiant matériel: 1
numéro de série: EE980A50
emplacement: Controller0-ChannelA-DIMM1
taille: 8GiB
bits: 64 bits
horloge: 2400MHz (0.4ns)
*-bank:2
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 2
emplacement: Controller1-ChannelA-DIMM0
*-bank:3
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 3
emplacement: Controller1-ChannelA-DIMM1
*-cache:0
description: L1 cache
identifiant matériel: 49
emplacement: L1 Cache
taille: 192KiB
capacité: 192KiB
fonctionnalités: synchronous internal write-back data
configuration: level=1
*-cache:1
description: L1 cache
identifiant matériel: 4a
emplacement: L1 Cache
taille: 128KiB
capacité: 128KiB
fonctionnalités: synchronous internal write-back instruction
configuration: level=1
*-cache:2
description: L2 cache
identifiant matériel: 4b
emplacement: L2 Cache
taille: 5MiB
capacité: 5MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=2
*-cache:3
description: L3 cache
identifiant matériel: 4c
emplacement: L3 Cache
taille: 12MiB
capacité: 12MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=3
*-cpu
description: CPU
produit: 12th Gen Intel(R) Core(TM) i3-12100
fabriquant: Intel Corp.
identifiant matériel: 4d
information bus: cpu@0
version: 12th Gen Intel(R) Core(TM) i3-12100
numéro de série: To Be Filled By O.E.M.
emplacement: U3E1
taille: 1368MHz
capacité: 5500MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req umip pku ospke gfni vaes vpclmulqdq rdpid md_clear flush_l1d arch_capabilities cpufreq
configuration: cores=4 enabledcores=4 threads=8
*-pci
description: Host bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 05
bits: 32 bits
horloge: 33MHz
*-display NON-RÉCLAMÉ
description: VGA compatible controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 0c
bits: 64 bits
horloge: 33MHz
fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list
configuration: latency=0
ressources: mémoire:41000000-41ffffff mémoire:50000000-5fffffff portE/S:5000(taille=64) mémoire:c0000-dffff mémoire:43000000-49ffffff
*-usb
description: USB controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:122 mémoire:42c00000-42c0ffff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.15.0-213-generic xhci-hcd
identifiant matériel: 0
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=16 speed=480Mbit/s
*-usb:0
description: Clavier
produit: Wireless Receiver
fabriquant: Telink
identifiant matériel: 6
information bus: usb@1:6
version: 1.00
fonctionnalités: usb-1.10
configuration: driver=usbhid maxpower=50mA speed=12Mbit/s
*-usb:1
description: Concentrateur USB
produit: USB2.0 Hub
fabriquant: Genesys Logic, Inc.
identifiant matériel: 7
information bus: usb@1:7
version: 60.90
fonctionnalités: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:2
description: Interface réseau sans fil
produit: SM4350-MTP _SN:7F6EE31F
fabriquant: OPPO
identifiant matériel: 9
information bus: usb@1:9
version: 5.04
numéro de série: 7f6ee31f
fonctionnalités: usb-2.10
configuration: driver=rndis_host maxpower=500mA speed=480Mbit/s
*-usb:3
description: Périphérique d'interface homme/machine
produit: ITE Device
fabriquant: ITE Tech. Inc.
identifiant matériel: b
information bus: usb@1:b
version: 0.01
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.15.0-213-generic xhci-hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-3.10
configuration: driver=hub slots=10 speed=10000Mbit/s
*-memory NON-RÉCLAMÉ
description: RAM memory
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 11
bits: 64 bits
horloge: 33MHz (30.3ns)
fonctionnalités: pm cap_list
configuration: latency=0
ressources: mémoire:42c14000-42c17fff mémoire:42c24000-42c24fff
*-serial:0 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 15
information bus: pci@0000:00:15.0
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:40600000-40600fff
*-serial:1 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 15.1
information bus: pci@0000:00:15.1
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:40601000-40601fff
*-serial:2 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 15.2
information bus: pci@0000:00:15.2
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:40602000-40602fff
*-serial:3 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 15.3
information bus: pci@0000:00:15.3
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:40603000-40603fff
*-communication NON-RÉCLAMÉ
description: Communication controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi cap_list
configuration: latency=0
ressources: mémoire:42c1f000-42c1ffff
*-storage
description: SATA controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 17
information bus: pci@0000:00:17.0
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:123 mémoire:42c18000-42c19fff mémoire:42c1e000-42c1e0ff portE/S:5090(taille=8) portE/S:5080(taille=4) portE/S:5060(taille=32) mémoire:42c1d000-42c1d7ff
*-serial:4 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 19
information bus: pci@0000:00:19.0
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:42c1c000-42c1cfff
*-serial:5 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 19.1
information bus: pci@0000:00:19.1
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:42c1b000-42c1bfff
*-pci:0
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 11
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:120 portE/S:4000(taille=4096) mémoire:42100000-42afffff portE/S:40400000(taille=2097152)
*-pci:1
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: 11
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:121 portE/S:3000(taille=4096) mémoire:42b00000-42bfffff
*-network NON-RÉCLAMÉ
description: Ethernet controller
produit: Realtek Semiconductor Co., Ltd.
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
version: 05
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list
configuration: latency=0
ressources: portE/S:3000(taille=256) mémoire:42b00000-42b0ffff mémoire:42b10000-42b13fff
*-isa
description: ISA bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 11
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-multimedia
description: Audio device
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 11
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:124 mémoire:42c10000-42c13fff mémoire:42000000-420fffff
*-serial:6 NON-RÉCLAMÉ
description: SMBus
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 11
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:42c1a000-42c1a0ff portE/S:efa0(taille=32)
*-serial:7 NON-RÉCLAMÉ
description: Serial bus controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f.5
information bus: pci@0000:00:1f.5
version: 11
bits: 32 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:40604000-40604fff
*-scsi:0
identifiant matériel: 1
nom logique: scsi4
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Samsung SSD 860
identifiant matériel: 0.0.0
information bus: scsi@4:0.0.0
nom logique: /dev/sda
version: 1B6Q
numéro de série: S3Z2NB0K702795Z
taille: 465GiB (500GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=7b980612-9235-42ea-b001-afb1c36dd868 logicalsectorsize=512 sectorsize=512
*-volume:0 NON-RÉCLAMÉ
description: Windows FAT volume
fabriquant: mkfs.fat
identifiant matériel: 1
information bus: scsi@4:0.0.0,1
version: FAT32
numéro de série: 34d9-a436
taille: 510MiB
capacité: 511MiB
fonctionnalités: boot fat initialized
configuration: FATs=2 filesystem=fat name=EFI System Partition
*-volume:1
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 2
information bus: scsi@4:0.0.0,2
nom logique: /dev/sda2
nom logique: /
version: 1.0
numéro de série: b1e72033-59f5-47fa-84fa-5242a2580ed0
taille: 30GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2020-04-07 06:36:29 filesystem=ext4 label=U18.04-e2-EFI lastmountpoint=/ modified=2023-12-13 11:26:09 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2023-12-13 11:26:10 state=mounted
*-volume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@4:0.0.0,3
nom logique: /dev/sda3
version: 1.0
numéro de série: 525a0522-f476-4670-bc78-063abbf871c5
taille: 49GiB
capacité: 49GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2020-04-25 09:04:51 filesystem=ext4 label=U20.04-e3 lastmountpoint=/media/jpb/U20.04-e3 modified=2023-10-12 19:30:00 mounted=2023-10-12 10:34:04 state=clean
*-volume:3
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 4
information bus: scsi@4:0.0.0,4
nom logique: /dev/sda4
version: 1.0
numéro de série: e85d2d99-5da1-4807-8df6-45ab96b0525a
taille: 50GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2020-05-21 07:02:06 filesystem=ext4 label=ISOS20-04 lastmountpoint=/media/ISOS20-04 modified=2023-12-01 12:02:34 mounted=2023-12-01 11:59:52 state=clean
*-volume:4
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 5
information bus: scsi@4:0.0.0,5
nom logique: /dev/sda5
version: 1.0
numéro de série: 9aa7bb09-4632-4746-90b8-7ad38b40502a
taille: 335GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2021-05-13 18:28:06 filesystem=ext4 label=film2 lastmountpoint=/media/jpb/film2 modified=2023-12-13 11:22:22 mounted=2023-12-13 11:06:07 state=clean
*-scsi:1
identifiant matériel: 2
nom logique: scsi5
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Samsung SSD 860
identifiant matériel: 0.0.0
information bus: scsi@5:0.0.0
nom logique: /dev/sdb
version: 1B6Q
numéro de série: S3YJNC0KA05153K
taille: 232GiB (250GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=0d514067
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@5:0.0.0,1
nom logique: /dev/sdb1
version: 1.0
numéro de série: c14de089-0371-46f3-829f-b3d2e715d031
taille: 38GiB
capacité: 38GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2018-12-15 12:35:51 filesystem=ext4 label=U18.04-d1 lastmountpoint=/mnt/jpb-2023:10:12-09:00:32 modified=2023-10-12 09:02:06 mounted=2023-10-12 09:02:06 state=clean
*-volume:1
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 2
information bus: scsi@5:0.0.0,2
nom logique: /dev/sdb2
version: 1.0
numéro de série: a0820a29-c024-4c15-b895-6f921d8af7eb
taille: 13GiB
capacité: 13GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration: created=2018-12-15 17:14:32 filesystem=ext4 label=ex-home-d2 lastmountpoint=/media/jpb/ex-home-d2 modified=2023-10-12 09:02:06 mounted=2023-10-12 09:02:06 state=clean
*-volume:2
description: Extended partition
identifiant matériel: 3
information bus: scsi@5:0.0.0,3
nom logique: /dev/sdb3
taille: 180GiB
capacité: 180GiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 5
nom logique: /dev/sdb5
version: 1.0
numéro de série: 856fb060-f337-45d1-89ef-5a0b2a25bbdc
taille: 9536MiB
capacité: 9536MiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration: created=2018-12-15 17:14:33 filesystem=ext4 label=ex-var-d5 lastmountpoint=/media/jpb/ex-var-d5 modified=2023-10-12 09:02:06 mounted=2023-10-12 09:02:06 state=clean
*-logicalvolume:1
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 6
nom logique: /dev/sdb6
nom logique: /media/jpb/S-U20.04-e3
version: 1.0
numéro de série: 8d4a38f2-6178-421b-88b4-d24f5aefdf36
taille: 50GiB
capacité: 50GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2020-04-25 09:04:51 filesystem=ext4 label=S-U20.04-e3 lastmountpoint=/media/jpb/S-U20.04-e3 modified=2023-12-13 11:46:12 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2023-12-13 11:46:12 state=mounted
*-logicalvolume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 7
nom logique: /dev/sdb7
nom logique: /media/jpb/U22.04-d7
version: 1.0
numéro de série: 4d12e299-3caa-488a-bff7-92286faf43cb
taille: 49GiB
capacité: 49GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2021-11-09 16:28:31 filesystem=ext4 label=U22.04-d7 lastmountpoint=/media/jpb/U22.04-d7 modified=2023-12-13 11:37:27 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2023-12-13 11:37:27 state=mounted
*-logicalvolume:3
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 8
nom logique: /dev/sdb8
version: 1.0
numéro de série: 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
taille: 25GiB
capacité: 25GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration: created=2023-03-29 19:09:20 filesystem=ext4 label=U22.10-d8 lastmountpoint=/mnt/jpb-2023:10:12-09:00:32 modified=2023-10-12 09:02:06 mounted=2023-10-12 09:02:06 state=clean
*-logicalvolume:4
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 9
nom logique: /dev/sdb9
version: 1.0
numéro de série: e45c0436-d453-4b44-b239-635bfb35c5a1
taille: 25GiB
capacité: 25GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2023-04-01 14:26:51 filesystem=ext4 label=U23.04-d9 modified=2023-10-12 09:02:06 mounted=2023-10-12 09:02:06 state=clean
*-scsi:2
identifiant matériel: 3
nom logique: scsi7
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVDRAM GH24NSD5
fabriquant: HL-DT-ST
identifiant matériel: 0.0.0
information bus: scsi@7:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: LV00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-power NON-RÉCLAMÉ
description: To Be Filled By O.E.M.
produit: To Be Filled By O.E.M.
fabriquant: To Be Filled By O.E.M.
identifiant matériel: 1
version: To Be Filled By O.E.M.
numéro de série: To Be Filled By O.E.M.
capacité: 32768mWh
*-network
description: Ethernet interface
identifiant matériel: 2
nom logique: enp0s20f0u9
numéro de série: c2:54:e9:51:eb:a4
fonctionnalités: ethernet physical
configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.71.223 link=yes multicast=yesjpb@jpb-MS-7A70:/etc$ sudo blkid|grep -v loop
/dev/sda1: UUID="34D9-A436" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="2d5df5ee-4aa5-48d3-a007-f6b4a152ba0f"
/dev/sda2: LABEL="U18.04-e2-EFI" UUID="b1e72033-59f5-47fa-84fa-5242a2580ed0" TYPE="ext4" PARTUUID="6bff4920-408b-4b88-83ad-9ec7aaa91d10"
/dev/sda3: LABEL="U20.04-e3" UUID="525a0522-f476-4670-bc78-063abbf871c5" TYPE="ext4" PARTUUID="554a8867-5587-4620-9615-e1e6fff4544f"
/dev/sda4: LABEL="ISOS20-04" UUID="e85d2d99-5da1-4807-8df6-45ab96b0525a" TYPE="ext4" PARTUUID="1561fcf7-d1a9-4a08-bfa9-0152ec05286b"
/dev/sda5: LABEL="film2" UUID="9aa7bb09-4632-4746-90b8-7ad38b40502a" TYPE="ext4" PARTUUID="ba6bea59-b82d-41f0-ab06-6858ebefea6b"
/dev/sdb1: LABEL="U18.04-d1" UUID="c14de089-0371-46f3-829f-b3d2e715d031" TYPE="ext4" PARTUUID="0d514067-01"
/dev/sdb2: LABEL="ex-home-d2" UUID="a0820a29-c024-4c15-b895-6f921d8af7eb" TYPE="ext4" PARTUUID="0d514067-02"
/dev/sdb5: LABEL="ex-var-d5" UUID="856fb060-f337-45d1-89ef-5a0b2a25bbdc" TYPE="ext4" PARTUUID="0d514067-05"
/dev/sdb6: LABEL="S-U20.04-e3" UUID="8d4a38f2-6178-421b-88b4-d24f5aefdf36" TYPE="ext4" PARTUUID="0d514067-06"
/dev/sdb7: LABEL="U22.04-d7" UUID="4d12e299-3caa-488a-bff7-92286faf43cb" TYPE="ext4" PARTUUID="0d514067-07"
/dev/sdb8: LABEL="U22.10-d8" UUID="188ab1f4-7f7f-4e74-83d0-8adcba9f9809" TYPE="ext4" PTTYPE="dos" PARTUUID="0d514067-08"
/dev/sdb9: LABEL="U23.04-d9" UUID="e45c0436-d453-4b44-b239-635bfb35c5a1" TYPE="ext4" PARTUUID="0d514067-09"
jpb@jpb-MS-7A70:/etc$ Dernière modification par ar barzh paour (Le 19/02/2024, à 07:16)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#2 Le 13/12/2023, à 12:34
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Bonjour.
Tu devrais regarder si ta nouvelle carte mère connait le mot EFI.
A priori c'est oui
Donc à toi de vérifier s'il est activé.
Il faudra probablement que tu lui dises le nom du fichier booter /EFI/ubuntu/shimx64.efi
Depuis le ubuntu qui fonctionne, regarde si le ubuntu récent est détecté.
sudo os-proberSi oui,
sudo update-grubDernière modification par geole (Le 13/12/2023, à 12:46)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#3 Le 13/12/2023, à 16:19
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
geole merci pour la réponse
entre temps j'ai ajouté un 3ème disque , le résultat n'est pas plus concluant
]jpb@jpb-MS-7A70:~$ sudo os-prober
[sudo] Mot de passe de jpb :
/dev/sda3:Ubuntu 20.04.6 LTS (20.04):Ubuntu:linux
/dev/sdb1:Ubuntu 18.04.6 LTS (18.04):Ubuntu1:linux
/dev/sdb6:Ubuntu 20.04.1 LTS (20.04):Ubuntu2:linux
/dev/sdb7:Ubuntu 22.04.3 LTS (22.04):Ubuntu3:linux
/dev/sdb8:Ubuntu 22.10 (22.10):Ubuntu4:linux
/dev/sdc12:Ubuntu 20.04.6 LTS (20.04):Ubuntu5:linux
/dev/sdc13:Ubuntu 22.04.2 LTS (22.04):Ubuntu6:linux
/dev/sdc14:Ubuntu 22.04.1 LTS (22.04):Ubuntu7:linux
/dev/sdc5:Ubuntu 16.04.7 LTS (16.04):Ubuntu8:linux
/dev/sdc6:Ubuntu 20.04.5 LTS (20.04):Ubuntu9:linux
jpb@jpb-MS-7A70:~$ jpb@jpb-MS-7A70:~$ sudo update-grub
Sourcing file `/etc/default/grub'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-213-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-213-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-211-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-211-generic
Adding boot menu entry for EFI firmware configuration
faitle boot se fait sur sda2
jpb@jpb-MS-7A70:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 74,1M 1 loop /snap/core22/1033
loop1 7:1 0 105,8M 1 loop /snap/core/16202
loop2 7:2 0 55,7M 1 loop /snap/core18/2790
loop3 7:3 0 218,4M 1 loop /snap/gnome-3-34-1804/93
loop4 7:4 0 508K 1 loop /snap/gnome-characters/789
loop5 7:5 0 1,6M 1 loop /snap/gnome-system-monitor/186
loop6 7:6 0 73,9M 1 loop /snap/core22/864
loop7 7:7 0 512K 1 loop /snap/gnome-characters/795
loop8 7:8 0 91,7M 1 loop /snap/gtk-common-themes/1535
loop9 7:9 0 2,1M 1 loop /snap/gnome-calculator/950
loop10 7:10 0 4K 1 loop /snap/bare/5
loop11 7:11 0 140,7M 1 loop /snap/gnome-3-26-1604/111
loop12 7:12 0 1,5M 1 loop /snap/gnome-system-monitor/184
loop13 7:13 0 349,7M 1 loop /snap/gnome-3-38-2004/143
loop14 7:14 0 105,8M 1 loop /snap/core/15925
loop15 7:15 0 804K 1 loop /snap/gnome-logs/119
loop16 7:16 0 2,2M 1 loop /snap/gnome-calculator/955
loop17 7:17 0 63,5M 1 loop /snap/core20/2015
loop18 7:18 0 812K 1 loop /snap/gnome-logs/121
loop19 7:19 0 497M 1 loop /snap/gnome-42-2204/141
loop20 7:20 0 485,5M 1 loop /snap/gnome-42-2204/126
sda 8:0 0 465,8G 0 disk
├─sda1 8:1 0 512M 0 part /boot/efi
├─sda2 8:2 0 30G 0 part /
├─sda3 8:3 0 50G 0 part
├─sda4 8:4 0 50G 0 part
└─sda5 8:5 0 335,3G 0 part
sdb 8:16 0 232,9G 0 disk
├─sdb1 8:17 0 38,8G 0 part
├─sdb2 8:18 0 14G 0 part
├─sdb3 8:19 0 1K 0 part
├─sdb5 8:21 0 9,3G 0 part
├─sdb6 8:22 0 50G 0 part
├─sdb7 8:23 0 50G 0 part
├─sdb8 8:24 0 25G 0 part
└─sdb9 8:25 0 25G 0 part
sdc 8:32 0 931,5G 0 disk
├─sdc1 8:33 0 7,8G 0 part
├─sdc2 8:34 0 53,7G 0 part
├─sdc3 8:35 0 118,5G 0 part
├─sdc5 8:37 0 9,4G 0 part
├─sdc6 8:38 0 27,8G 0 part
├─sdc7 8:39 0 400G 0 part
├─sdc8 8:40 0 200G 0 part /media/jpb/s-Photos
├─sdc9 8:41 0 6G 0 part
├─sdc10 8:42 0 25G 0 part
├─sdc11 8:43 0 10G 0 part
├─sdc12 8:44 0 14G 0 part
├─sdc13 8:45 0 36,4G 0 part
└─sdc14 8:46 0 19,5G 0 part
sr0 11:0 1 1024M 0 rom
jpb@jpb-MS-7A70:~$ PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#4 Le 13/12/2023, à 16:29
- geole
Re : [Résolu] changement de carte mère : disque non bootable
A tout hasard, ajoute cette ligne
GRUB_DISABLE_OS_PROBER=false
dans le fichier /etc/default/grub
ou modifie la ligne
GRUB_DISABLE_OS_PROBER=true
si elle est présente et relance la mise à jour du grub
Donne aussi ce retour
efibootmgr -vExtrait de la commande
├─sda1 8:1 0 512M 0 part /boot/efi
Mais, A mon avis, avec dix ubuntu présents, tu devrais oublier les dix grub voir les supprimer et installer un seul refind. Il sera toujours à jour.
Dernière modification par geole (Le 13/12/2023, à 16:36)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#5 Le 13/12/2023, à 17:25
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
jpb@jpb-MS-7A70:~$ efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001
Boot0001* ubuntu HD(1,GPT,2d5df5ee-4aa5-48d3-a007-f6b4a152ba0f,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)..BOil y a bien des skip que j'avais ajouté à l'époque où j'utilisais 18.04 , mais pas GRUB_DISABLE_OS_PROBER=true
jpb@jpb-MS-7A70:/etc/default$ cat grub|grep DISABLE
#GRUB_DISABLE_LINUX_UUID=true
#GRUB_DISABLE_RECOVERY="true"
jpb@jpb-MS-7A70:/etc/default$jpb@jpb-MS-7A70:~$ cd /etc/default
jpb@jpb-MS-7A70:/etc/default$ cat grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_OS_PROBER_SKIP_LIST="21a7fb42-ce7c-47c3-a77c-e55dc3e12590@/dev/sda10,cb9be900-e560-4c86-aa5c-8842b40fee00@/dev/sda12,adb3563a-ddba-4f75-8e82-7df3e3d2a4a5@/dev/sda2,ed6801f3-ddfe-46ff-b3e9-83219cd58ca9@/dev/sda5,c63335c7-be09-4782-978c-dff6cce2be94@/dev/sda7,d4b0b586-0b8e-457e-b492-78c272d1954f@/dev/sda9,a17886e2-7520-42fb-bb3c-7b43781cf5bc@/dev/sdb5,3aabc8ae-d129-419c-bb5a-1292d98ec0f6@/dev/sdc11,3e774a44-b817-4b60-964c-46d4808d17ef@/dev/sdc9"
jpb@jpb-MS-7A70:/etc/default$ PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#6 Le 13/12/2023, à 17:45
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Je réalise que tu as interdit tous les autres. C'est équivalent à l'option true
Ils ne peuvent donc pas être proposés dans la liste d'affichage.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#7 Le 13/12/2023, à 18:08
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
bien vu , j'ai diésé la ligne concernée
pour que ce soit plus clair , uniquement les lignes ne commençant pas par dièse
jpb@jpb-MS-7A70:/etc/default$ cat grub|grep -v "^#"
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
jpb@jpb-MS-7A70:/etc/default$
et tout
jpb@jpb-MS-7A70:/etc/default$ cat grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_OS_PROBER_SKIP_LIST="21a7fb42-ce7c-47c3-a77c-e55dc3e12590@/dev/sda10,cb9be900-e560-4c86-aa5c-8842b40fee00@/dev/sda12,adb3563a-ddba-4f75-8e82-7df3e3d2a4a5@/dev/sda2,ed6801f3-ddfe-46ff-b3e9-83219cd58ca9@/dev/sda5,c63335c7-be09-4782-978c-dff6cce2be94@/dev/sda7,d4b0b586-0b8e-457e-b492-78c272d1954f@/dev/sda9,a17886e2-7520-42fb-bb3c-7b43781cf5bc@/dev/sdb5,3aabc8ae-d129-419c-bb5a-1292d98ec0f6@/dev/sdc11,3e774a44-b817-4b60-964c-46d4808d17ef@/dev/sdc9"
jpb@jpb-MS-7A70:mais hélas ça ne change rien
jpb@jpb-MS-7A70:/etc/default$ sudo update-grub
Sourcing file `/etc/default/grub'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-213-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-213-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-211-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-211-generic
Adding boot menu entry for EFI firmware configuration
fait
jpb@jpb-MS-7A70:/etc/default$ Dernière modification par ar barzh paour (Le 18/12/2023, à 09:20)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#8 Le 13/12/2023, à 18:43
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Ajoute malgré tout cette ligne dans le fichier d options
GRUB_DISABLE_OS_PROBER=falseLes grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#9 Le 14/12/2023, à 09:53
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
je ne sais pas ce qui se passe mais mon PC ne boote plus
avec la version 18.04 qui a bien démarré au début ,je tourne en rond sur la saisie du mot de passe !!!
et pourtant je tape bien le bon mot de passe : cependant je me suis aperçu que le clavier est maintenant en qwerty au lieu de azerty , j'ai donc utilisé le clavier visuel pour être sur de ce que je tapais ....
et en plus maintenant ma clé USB live n'est plus lancée. lorsque je l'utilise elle est bien reconnu par le BIOS , je peux donc la choisir
mais quand je la choisis, il y a un temps d'attente puis c'est la version du disque interne qui est lancé : attente du mot de passe qui n'est pas accepté
là je dois dire que je désespère
je ne peux donc plus faire aucune manip sur ce PC
j'utilise mon portable pour écrire ce post
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#10 Le 14/12/2023, à 10:06
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Bonjour.
Un cas classique de boucle sur le mot de passe est le manque de place disque.
Peux-tu vérifier que ta clé USB boote encore bien avec ton autre ordinateur.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#11 Le 14/12/2023, à 12:42
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
après avoir galéré , vérifié que ma clé bootait bien sur mon portable (oui)
j'ai re-essayé ma clé sur mon PC (après suppression d'un écran) , démontage de disques
elle a fini par booter
j'ai créé un partition sur le disque et refait une installation toute neuve sur cette partition
j'arrive à booter sur cette partition mais je suis un peu perdu pour savoir où se trouve les fichiers qui permettent de booter
là je n'ai plus le temps
plus d'info cet après midi !!!
Dernière modification par ar barzh paour (Le 18/12/2023, à 09:22)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#12 Le 14/12/2023, à 13:02
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Poster l'URL générée par un boot-info serait apprécié.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#13 Le 14/12/2023, à 17:30
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
je pense que ma carte mère ne sais pas gérer le boot legacy , contrairement à ma carte précédente qui savait gérer les deux modes ( uefi , legacy )
voilà comment je m'en suis sorti : j'ai créé une partition à partir d'une clé usb que j'ai réussi à faire booter
(remarque l'os 18.04 qui se lançait avant ne doit plus être fonctionnel , j'avais plein de dysfonctionnements)
donc
ma situation actuelle
4 disques
1-sda ( seul gpt )
2-sdb
3-sdc
4-sdd
la partition que j'ai céée pour pouvoir rebooter c'est sda6 (49,56Gio) ,(elle ne me sert que pour le boot)
la partition qui me sert à travailler c'est sdb7 ( 50,00 Gio )
comment je lance cette version
au boot j'ai un menu qui me propose
Ubuntu (ça c'est le nouvel OS que j'ai créé) (hd0, gpt6)
puis divers OS dont
22.04.3 sdb7 ( c'est mon os de travail ) (hd1,msdos7)
puis divers OS
le problème que j'entrevois est celui-ci
quand je ferais une mise à jour de grub à partir de ma version de travail 22.04.3 sdb7, le grub qui sera mis à jour est sdb7/boot/grub/grub.cfg
le grub est est lancé au reboot c'est sda/boot/grub/grub.cfg , ce menu ne sera donc pas à jour
quelle manip me préconisez-vous ?
( encore une fois je ne comprends pas la façon de fonctionner de UEFI !!!)
@geole : je viens de voir que tu demandes un rapport de boot-info , il va venir
(il est assez long environ 200 lignes ! et le lien ne fonctioone pas mais j'ai réussi à avoir le résultat)
Dernière modification par ar barzh paour (Le 14/12/2023, à 17:44)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#14 Le 14/12/2023, à 17:40
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
boot-info-4ppa2062 [20231214_1733]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
97784016 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt3)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos10)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos18)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu Jammy Jellyfish (development branch)
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdb7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdb8: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sdb8
and looks at sector 361381336 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos8)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 22.10
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdb9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: According to the info in the boot sector, sdc1 starts
at sector 63. But according to the info from fdisk,
sdc1 starts at sector 2048.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc9: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdc11: _________________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc12: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc13: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd2: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sdd2 and looks at sector 938189065 of the same hard
drive for core.img, but core.img can not be found at
this location.
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdd3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdd5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd7: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sdd7
and looks at sector 1296283544 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 16.04.7 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdd8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd9: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sdd9
and looks at sector 1365350560 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos9)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 16.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdd10: _________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sdd10 and looks at sector 1400453248 of the same hard
drive for core.img, but core.img can not be found at
this location.
Operating System: Ubuntu 16.04.7 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdd11: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd12: _________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of
sdd12 and looks at sector 1490986680 of the same hard
drive for core.img. core.img is at this location and
looks for (,msdos12)/boot/grub. It also embeds
following components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 16.04.7 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdd13: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd14: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd15: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd16: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd17: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd18: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 23.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
================================ 15 OS detected ================================
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.3 LTS on sdb7
OS#2: Ubuntu 18.04.6 LTS on sda2
OS#3: Ubuntu 20.04.6 LTS on sda3
OS#4: Ubuntu Jammy Jellyfish (development branch) on sda6
OS#5: Ubuntu 18.04.6 LTS on sdb1
OS#6: Ubuntu 20.04.1 LTS on sdb6
OS#7: Ubuntu 22.10 on sdb8
OS#8: Ubuntu 18.04.6 LTS on sdc10
OS#9: Ubuntu 16.04.7 LTS on sdd10
OS#10: Ubuntu 16.04.7 LTS on sdd12
OS#11: Ubuntu 23.04 on sdd18
OS#12: Ubuntu 18.04.6 LTS on sdd2
OS#13: Ubuntu 16.04.7 LTS on sdd7
OS#14: Ubuntu 16.04.6 LTS on sdd9
OS#15: Windows XP on sdc1
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: Intel Corporation from Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.19.0-32-generic root=UUID=4d12e299-3caa-488a-bff7-92286faf43cb ro quiet loglevel=3 splash
df -Th / : /dev/sdb7 ext4 49G 43G 4,1G 92% /
===================================== UEFI =====================================
BIOS/UEFI firmware: F11(5.27) from American Megatrends International, LLC.
The firmware is EFI-compatible, and is set in EFI-mode for this installed-session.
SecureBoot disabled (confirmed by mokutil).
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001
Boot0001* ubuntu HD(1,GPT,2d5df5ee-4aa5-48d3-a007-f6b4a152ba0f,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
a9c517741ac31962d7feb152948ad1ee sda1/BOOT/fbx64.efi
a660182adef313615746a665966d2ccc sda1/BOOT/mmx64.efi
a1da253696a304dce6b4668b70151c0e sda1/ubuntu/grubx64.efi
a660182adef313615746a665966d2ccc sda1/ubuntu/mmx64.efi
64349b3622c65f495a99dbf6102496e3 sda1/ubuntu/shimx64.efi
64349b3622c65f495a99dbf6102496e3 sda1/BOOT/BOOTX64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sdb : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, no-wind, 63 sectors * 512 bytes
sdd : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, no-wind, 63 sectors * 512 bytes
sdc : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sdb7 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdd2 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdd18 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdd16 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd9 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdd14 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd7 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdd12 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdd5 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd10 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ng, update-grub, end-after-100GB
sdd3 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd1 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd17 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd15 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd13 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdd11 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdb2 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb9 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdb5 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, not-far
sdb8 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdb6 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
sdc13 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdc11 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdc7 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdc5 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdc1 : is-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdc12 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdc10 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ng, update-grub, end-after-100GB
sdc8 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdc6 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sda4 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sda2 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, not-far
sda5 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sda3 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ng, update-grub, not-far
sda1 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda6 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, end-after-100GB
Partitions info (2/3): _________________________________________________________
sdb7 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd2 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd18 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd16 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd9 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd14 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd7 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd12 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd10 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd17 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd15 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd13 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd11 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb9 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb8 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb6 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc13 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc11 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc7 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : isnotESP, part-has-no-fstab, ntldr, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc12 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc10 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc8 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc6 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda3 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda6 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sdb7 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdb
sdd2 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdd
sdd18 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdd
sdd16 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd9 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdd
sdd14 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd7 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdd
sdd12 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdd
sdd5 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd10 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdd
sdd3 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd1 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd17 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd15 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd13 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdd11 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
sdb2 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb9 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb5 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb1 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdb
sdb8 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdb
sdb6 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdb
sdc13 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc11 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc7 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc5 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc12 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc10 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdc
sdc8 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sdc6 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdc
sda4 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda2 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda5 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda3 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda6 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 7B980612-9235-42EA-B001-AFB1C36DD868
Start End Sectors Size Type
sda1 2048 1050623 1048576 512M EFI System
sda2 1050624 63965183 62914560 30G Linux filesystem
sda3 63965184 168822605 104857422 50G Linux filesystem
sda4 168822784 273680383 104857600 50G Linux filesystem
sda5 273680384 639289343 365608960 174.3G Linux filesystem
sda6 639289344 743232703 103943360 49.6G Linux filesystem
Disk sdb: 232.89 GiB, 250059350016 bytes, 488397168 sectors
Disk identifier: 0x0d514067
Boot Start End Sectors Size Id Type
sdb1 * 63 81400453 81400391 38.8G 83 Linux
sdb2 81401856 110696447 29294592 14G 83 Linux
sdb3 110698494 488396799 377698306 180.1G 5 Extended
sdb5 110698496 130228223 19529728 9.3G 83 Linux
sdb6 130230272 235087871 104857600 50G 83 Linux
sdb7 235089920 339947341 104857422 50G 83 Linux
sdb8 339949568 392379255 52429688 25G 83 Linux
sdb9 392382464 444811263 52428800 25G 83 Linux
Disk sdc: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x86fa836a
Boot Start End Sectors Size Id Type
sdc1 * 2048 81922047 81920000 39.1G 7 HPFS/NTFS/exFAT
sdc2 81924094 1953523711 1871599618 892.4G 5 Extended
sdc5 81924096 920784895 838860800 400G 83 Linux
sdc6 920786944 1340217343 419430400 200G 83 Linux
sdc7 1340219392 1381180329 40960938 19.5G 83 Linux
sdc8 1381181440 1393469439 12288000 5.9G 83 Linux
sdc9 1473439744 1481828351 8388608 4G 82 Linux swap / Solaris
sdc10 1481830400 1543269853 61439454 29.3G 83 Linux
sdc11 1543272448 1651998719 108726272 51.8G 7 HPFS/NTFS/exFAT
sdc12 1669294080 1721542655 52248576 24.9G 83 Linux
sdc13 1721544704 1742516223 20971520 10G 83 Linux
Disk sdd: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x00096b93
Boot Start End Sectors Size Id Type
sdd1 * 63 781417664 781417602 372.6G 83 Linux
sdd2 781417665 976767274 195349610 93.1G 83 Linux
sdd3 976768065 1172118464 195350400 93.2G 83 Linux
sdd4 1172121598 1953525167 781403570 372.6G 5 Extended
sdd5 1172121600 1213082537 40960938 19.5G 83 Linux
sdd6 1213083648 1228707839 15624192 7.5G 82 Linux swap / Solaris
sdd7 1228709888 1251237887 22528000 10.7G 83 Linux
sdd8 1331111936 1344782335 13670400 6.5G 82 Linux swap / Solaris
sdd9 1344784384 1387397665 42613282 20.3G 83 Linux
sdd10 1387399168 1469319167 81920000 39.1G 83 Linux
sdd11 1469321216 1481609215 12288000 5.9G 83 Linux
sdd12 1481613312 1510899711 29286400 14G 83 Linux
sdd13 1510901760 1541621759 30720000 14.6G 83 Linux
sdd14 1541623808 1562103807 20480000 9.8G 83 Linux
sdd15 1562105856 1582585855 20480000 9.8G 83 Linux
sdd16 1582587904 1735008255 152420352 72.7G 83 Linux
sdd17 1735010304 1953523711 218513408 104.2G 83 Linux
sdd18 1251239936 1303668735 52428800 25G 83 Linux
Partition table entries are not in disk order.
parted -lm (filtered): _________________________________________________________
sda:500GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:32.8GB:32.2GB:ext4::;
3:32.8GB:86.4GB:53.7GB:ext4::;
4:86.4GB:140GB:53.7GB:ext4::;
5:140GB:327GB:187GB:ext4::;
6:327GB:381GB:53.2GB:ext4::;
sdb:250GB:scsi:512:512:msdos:ATA Samsung SSD 860:;
1:32.3kB:41.7GB:41.7GB:ext4::boot;
2:41.7GB:56.7GB:15.0GB:ext4::;
3:56.7GB:250GB:193GB:::;
5:56.7GB:66.7GB:9999MB:ext4::;
6:66.7GB:120GB:53.7GB:ext4::;
7:120GB:174GB:53.7GB:ext4::;
8:174GB:201GB:26.8GB:ext4::;
9:201GB:228GB:26.8GB:ext4::;
sdc:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1SB1:;
1:1049kB:41.9GB:41.9GB:ntfs::boot;
2:41.9GB:1000GB:958GB:::;
5:41.9GB:471GB:429GB:ext4::;
6:471GB:686GB:215GB:ext4::;
7:686GB:707GB:21.0GB:ext4::;
8:707GB:713GB:6291MB:ext4::;
9:754GB:759GB:4295MB:linux-swap(v1)::;
10:759GB:790GB:31.5GB:ext4::;
11:790GB:846GB:55.7GB:ntfs::;
12:855GB:881GB:26.8GB:ext4::;
13:881GB:892GB:10.7GB:ext4::;
sdd:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1ER1:;
1:32.3kB:400GB:400GB:ext4::boot;
2:400GB:500GB:100GB:ext4::;
3:500GB:600GB:100GB:ext4::;
4:600GB:1000GB:400GB:::;
5:600GB:621GB:21.0GB:ext4::;
6:621GB:629GB:8000MB:linux-swap(v1)::;
7:629GB:641GB:11.5GB:ext4::;
18:641GB:667GB:26.8GB:ext4::;
8:682GB:689GB:6999MB:linux-swap(v1)::;
9:689GB:710GB:21.8GB:ext4::;
10:710GB:752GB:41.9GB:ext4::;
11:752GB:759GB:6291MB:ext4::;
12:759GB:774GB:15.0GB:ext4::;
13:774GB:789GB:15.7GB:ext4::;
14:789GB:800GB:10.5GB:ext4::;
15:800GB:810GB:10.5GB:ext4::;
16:810GB:888GB:78.0GB:ext4::;
17:888GB:1000GB:112GB:ext4::;
Free space >10MiB: ______________________________________________________________
sda: 362907MiB:476940MiB:114033MiB
sdb: 217193MiB:238475MiB:21282MiB
sdc: 680405MiB:719450MiB:39045MiB
sdc: 806640MiB:815079MiB:8439MiB
sdc: 850838MiB:953869MiB:103031MiB
sdd: 636557MiB:649957MiB:13400MiB
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 34D9-A436 2d5df5ee-4aa5-48d3-a007-f6b4a152ba0f EFI System Partition
├─sda2 ext4 b1e72033-59f5-47fa-84fa-5242a2580ed0 6bff4920-408b-4b88-83ad-9ec7aaa91d10 U18.04-e2-EFI
├─sda3 ext4 525a0522-f476-4670-bc78-063abbf871c5 554a8867-5587-4620-9615-e1e6fff4544f U20.04-e3
├─sda4 ext4 e85d2d99-5da1-4807-8df6-45ab96b0525a 1561fcf7-d1a9-4a08-bfa9-0152ec05286b ISOS20-04
├─sda5 ext4 9aa7bb09-4632-4746-90b8-7ad38b40502a ba6bea59-b82d-41f0-ab06-6858ebefea6b film2
└─sda6 ext4 000b2bfd-2dd6-409a-be78-7c0c2d7ab6de 898af1a8-2482-420d-bcfd-54594db2104f sda6
sdb
├─sdb1 ext4 c14de089-0371-46f3-829f-b3d2e715d031 0d514067-01 U18.04-d1
├─sdb2 ext4 a0820a29-c024-4c15-b895-6f921d8af7eb 0d514067-02 ex-home-d2
├─sdb3 0d514067-03
├─sdb5 ext4 856fb060-f337-45d1-89ef-5a0b2a25bbdc 0d514067-05 ex-var-d5
├─sdb6 ext4 8d4a38f2-6178-421b-88b4-d24f5aefdf36 0d514067-06 S-U20.04-e3
├─sdb7 ext4 4d12e299-3caa-488a-bff7-92286faf43cb 0d514067-07 U22.04-d7
├─sdb8 ext4 188ab1f4-7f7f-4e74-83d0-8adcba9f9809 0d514067-08 U22.10-d8
└─sdb9 ext4 e45c0436-d453-4b44-b239-635bfb35c5a1 0d514067-09 U23.04-d9
sdc
├─sdc1 ntfs 78684472684430E4 86fa836a-01 XP-c1
├─sdc2 86fa836a-02
├─sdc5 ext4 158730c0-4b38-42f9-853a-ea825678687a 86fa836a-05 Data
├─sdc6 ext4 3d84d1cf-035e-48bb-8b93-762bad2f41ca 86fa836a-06 Photos
├─sdc7 ext4 c5a33375-b59d-4451-9b5f-e3c1bdf3d5c0 86fa836a-07 home-c10
├─sdc8 ext4 207a6f34-be95-446b-85b2-17827a1d2cb9 86fa836a-08 SH
├─sdc9 swap 722d52ca-7c00-4e99-a810-9db3288fac4a 86fa836a-09
├─sdc10 ext4 3aabc8ae-d129-419c-bb5a-1292d98ec0f6 86fa836a-0a U18-04-c10
├─sdc11 ntfs 276062A85EEF336D 86fa836a-0b Z-c11
├─sdc12 ext4 b2be1488-2032-4808-a596-6d53daf67f5f 86fa836a-0c home_U18.04-d1
└─sdc13 ext4 9b15bd6c-74e7-43f0-b0ed-4ef8cf7a67f9 86fa836a-0d var_U18.04-d1
sdd
├─sdd1 ext4 f028ddf3-d3d9-49fa-a32f-e824801e87f0 00096b93-01 film
├─sdd2 ext4 adb3563a-ddba-4f75-8e82-7df3e3d2a4a5 00096b93-02 U18.04-a2
├─sdd3 ext4 7ff4db04-1b96-4084-9e98-2902fba48e97 00096b93-03 les-homes
├─sdd4 00096b93-04
├─sdd5 ext4 18e4fc77-1138-4a49-bf78-2d7d8d8b1eb6 00096b93-05
├─sdd6 swap 81b7d41d-574c-4d4b-8740-3e6c55400674 00096b93-06
├─sdd7 ext4 c63335c7-be09-4782-978c-dff6cce2be94 00096b93-07 U16.04-a7-32b
├─sdd8 swap a1516336-9bb7-4c9f-b63e-9cab2d58e8f1 00096b93-08
├─sdd9 ext4 d4b0b586-0b8e-457e-b492-78c272d1954f 00096b93-09 X16.04-a9-32b
├─sdd10 ext4 21a7fb42-ce7c-47c3-a77c-e55dc3e12590 00096b93-0a U16.04-a10
├─sdd11 ext4 70d8a884-f9b4-4c50-929a-cb2a02cbbcaf 00096b93-0b ex-SH
├─sdd12 ext4 cb9be900-e560-4c86-aa5c-8842b40fee00 00096b93-0c M16.04-a12
├─sdd13 ext4 5081bcb8-8e05-4c14-bf04-478ff7bded31 00096b93-0d h_SDD
├─sdd14 ext4 20d009b8-7e01-4436-8292-95c98fdd333e 00096b93-0e v_SDD
├─sdd15 ext4 fa6b6015-f2a6-4d58-b865-2cd12ea8cc76 00096b93-0f Solf
├─sdd16 ext4 85dacada-76e8-4e54-913f-c5af400267bf 00096b93-10 ISOS
├─sdd17 ext4 c1ea4721-a093-41b2-ab34-1246fbec4b84 00096b93-11 filmJPL
└─sdd18 ext4 02fce1ae-a04c-44e5-9df9-11a08369297b 00096b93-12 U23.04-a18
sde
sdf
sdg
sdh
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/sda1 504.9M 1% /mnt/boot-sav/sda1
/dev/sda2 16G 38% /mnt/boot-sav/sda2
/dev/sda3 18.3G 57% /mnt/boot-sav/sda3
/dev/sda4 40.9G 11% /media/ISOS20-04
/dev/sda5 60.3G 60% /mnt/boot-sav/sda5
/dev/sda6 35.2G 22% /mnt/boot-sav/sda6
/dev/sdb1 28.5G 20% /mnt/boot-sav/sdb1
/dev/sdb2 12.9G 0% /mnt/boot-sav/sdb2
/dev/sdb5 7.3G 15% /mnt/boot-sav/sdb5
/dev/sdb6 18.8G 56% /mnt/boot-sav/sdb6
/dev/sdb7 4.1G 87% /
/dev/sdb8 8.5G 60% /mnt/boot-sav/sdb8
/dev/sdb9 23.2G 0% /mnt/boot-sav/sdb9
/dev/sdc10 17.9G 32% /mnt/boot-sav/sdc10
/dev/sdc11 1.5G 97% /mnt/boot-sav/sdc11
/dev/sdc1 21.8G 44% /mnt/boot-sav/sdc1
/dev/sdc12 9.2G 57% /mnt/boot-sav/sdc12
/dev/sdc13 7.3G 20% /mnt/boot-sav/sdc13
/dev/sdc5 198.3G 45% /media/Data
/dev/sdc6 66G 61% /mnt/boot-sav/sdc6
/dev/sdc7 15.3G 15% /mnt/boot-sav/sdc7
/dev/sdc8 5.1G 6% /media/SH
/dev/sdd10 14.5G 57% /mnt/boot-sav/sdd10
/dev/sdd11 5G 6% /mnt/boot-sav/sdd11
/dev/sdd12 6.4G 48% /mnt/boot-sav/sdd12
/dev/sdd13 3.8G 69% /mnt/boot-sav/sdd13
/dev/sdd14 7G 21% /mnt/boot-sav/sdd14
/dev/sdd15 8.3G 7% /mnt/boot-sav/sdd15
/dev/sdd16 14.5G 75% /media/ISOS
/dev/sdd17 2.9G 92% /mnt/boot-sav/sdd17
/dev/sdd1 77.4G 74% /mnt/boot-sav/sdd1
/dev/sdd18 9.5G 56% /mnt/boot-sav/sdd18
/dev/sdd2 66.9G 22% /mnt/boot-sav/sdd2
/dev/sdd3 20.3G 73% /mnt/boot-sav/sdd3
/dev/sdd5 18.1G 0% /mnt/boot-sav/sdd5
/dev/sdd7 3.1G 65% /mnt/boot-sav/sdd7
/dev/sdd9 13.6G 26% /mnt/boot-sav/sdd9
Mount options (filtered): ______________________________________________________
/dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda2 ext4 rw,relatime
/dev/sda3 ext4 rw,relatime
/dev/sda4 ext4 rw,relatime
/dev/sda5 ext4 rw,relatime
/dev/sda6 ext4 rw,relatime
/dev/sdb1 ext4 rw,relatime
/dev/sdb2 ext4 rw,relatime
/dev/sdb5 ext4 rw,relatime
/dev/sdb6 ext4 rw,relatime
/dev/sdb7 ext4 rw,relatime,errors=remount-ro
/dev/sdb8 ext4 rw,relatime
/dev/sdb9 ext4 rw,relatime
/dev/sdc10 ext4 rw,relatime
/dev/sdc11 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdc12 ext4 rw,relatime
/dev/sdc13 ext4 rw,relatime
/dev/sdc1 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdc5 ext4 rw,relatime
/dev/sdc6 ext4 rw,relatime,stripe=32732
/dev/sdc7 ext4 rw,relatime
/dev/sdc8 ext4 rw,relatime
/dev/sdd10 ext4 rw,relatime,stripe=32624
/dev/sdd11 ext4 rw,relatime
/dev/sdd12 ext4 rw,relatime,stripe=32603
/dev/sdd13 ext4 rw,relatime
/dev/sdd14 ext4 rw,relatime
/dev/sdd15 ext4 rw,relatime
/dev/sdd16 ext4 rw,relatime
/dev/sdd17 ext4 rw,relatime
/dev/sdd18 ext4 rw,relatime
/dev/sdd1 ext4 rw,relatime
/dev/sdd2 ext4 rw,relatime,stripe=32730
/dev/sdd3 ext4 rw,relatime
/dev/sdd5 ext4 rw,relatime
/dev/sdd7 ext4 rw,relatime
/dev/sdd9 ext4 rw,relatime,stripe=32650
===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 000b2bfd-2dd6-409a-be78-7c0c2d7ab6de root hd0,gpt6
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sda2/boot/grub/grub.cfg (filtered) ======================
Ubuntu b1e72033-59f5-47fa-84fa-5242a2580ed0
System setup uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=b1e72033-59f5-47fa-84fa-5242a2580ed0 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=34D9-A436 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
======================= sda2/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
3.540039062 = 3.801088000 boot/grub/grub.cfg 3
16.133865356 = 17.323606016 boot/vmlinuz-4.15.0-211-generic 2
13.329174042 = 14.312091648 boot/vmlinuz-4.15.0-213-generic 1
13.329174042 = 14.312091648 vmlinuz 1
16.133865356 = 17.323606016 vmlinuz.old 2
16.950191498 = 18.200129536 boot/initrd.img-4.15.0-211-generic 2
14.198352814 = 15.245365248 boot/initrd.img-4.15.0-213-generic 1
14.198352814 = 15.245365248 initrd.img 1
16.950191498 = 18.200129536 initrd.img.old 2
===================== sda2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12808 Aug 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 Jul 17 2018 20_linux_xen
-rw-r--r-- 1 root root 12059 Jul 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 Jul 17 2018 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jul 17 2018 40_custom
-rwxr-xr-x 1 root root 216 Jul 17 2018 41_custom
====================== sda3/boot/grub/grub.cfg (filtered) ======================
Ubuntu 525a0522-f476-4670-bc78-063abbf871c5
Ubuntu 16.04.7 LTS (16.04) (sur sda10) 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
Ubuntu 16.04.7 LTS (16.04) (sur sda12) cb9be900-e560-4c86-aa5c-8842b40fee00
Ubuntu 23.04 (23.04) (sur sda18) 02fce1ae-a04c-44e5-9df9-11a08369297b
Ubuntu 18.04.6 LTS (18.04) (sur sda2) adb3563a-ddba-4f75-8e82-7df3e3d2a4a5
Ubuntu 16.04.7 LTS (16.04) (sur sda7) c63335c7-be09-4782-978c-dff6cce2be94
Ubuntu 16.04.6 LTS (16.04) (sur sda9) d4b0b586-0b8e-457e-b492-78c272d1954f
Windows NT/2000/XP (sur sdb1) 0AF8F8ED4E45274B
Ubuntu 20.04.6 LTS (20.04) (sur sdb12) cb4b4845-d512-4828-9ec8-f018eee5c3de
Ubuntu 22.04.2 LTS (22.04) (sur sdb13) bea957e7-6100-494d-ae0e-3deeeba8f5b1
Ubuntu 22.04.1 LTS (22.04) (sur sdb14) f52a6351-a90f-446a-94a0-c96279adba2c
Ubuntu 16.04.7 LTS (16.04) (sur sdb5) a17886e2-7520-42fb-bb3c-7b43781cf5bc
Ubuntu 20.04.5 LTS (20.04) (sur sdb6) f77c83f0-a0dd-4805-bf13-942e65290a72
Windows NT/2000/XP (sur sdc1) 78684472684430E4
Ubuntu 18.04.6 LTS (18.04) (sur sdc10) 3aabc8ae-d129-419c-bb5a-1292d98ec0f6
Ubuntu 18.04.6 LTS (18.04) (sur sdd1) c14de089-0371-46f3-829f-b3d2e715d031
Ubuntu 20.04.1 LTS (20.04) (sur sdd6) 8d4a38f2-6178-421b-88b4-d24f5aefdf36
Ubuntu 22.04.3 LTS (22.04) (sur sdd7) 4d12e299-3caa-488a-bff7-92286faf43cb
Ubuntu 22.10 (22.10) (sur sdd8) 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
Ubuntu 18.04.6 LTS (18.04) (sur sde2) b1e72033-59f5-47fa-84fa-5242a2580ed0
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
lancer mes isos_gpt
lancer mes isos_msdos
========================== sda3/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sde3 during installation
UUID=525a0522-f476-4670-bc78-063abbf871c5 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=ISOS /media/ISOS ext4 defaults,nofail 0
LABEL=ISOS20-04 /media/ISOS20-04 ext4 defaults,nofail 0
# swap was on /dev/sda6 during installation
# swap was on /dev/sda8 during installation
# swap was on /dev/sdb6 during installation
# swap was on /dev/sdc10 during installation
======================= sda3/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DEFAULT=saved
GRUB_SAVEDEFAULT=true
==================== sda3: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
53.619430542 = 57.573425152 boot/grub/grub.cfg 4
46.627075195 = 50.065440768 boot/grub/i386-pc/core.img 1
68.422847748 = 73.468473344 boot/vmlinuz 2
73.086910248 = 78.476472320 boot/vmlinuz-5.15.0-84-generic 2
68.422847748 = 73.468473344 boot/vmlinuz-5.15.0-86-generic 2
73.086910248 = 78.476472320 boot/vmlinuz.old 2
79.750972748 = 85.631954944 boot/initrd.img 9
79.094722748 = 84.927311872 boot/initrd.img-5.15.0-84-generic 8
79.750972748 = 85.631954944 boot/initrd.img-5.15.0-86-generic 9
79.094722748 = 84.927311872 boot/initrd.img.old 8
===================== sda3: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18224 Jan 11 2022 10_linux
-rwxr-xr-x 1 root root 42359 Aug 17 2020 10_linux_zfs
-rwxr-xr-x 1 root root 13101 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 12059 Apr 15 2020 30_os-prober
-rwxr-xr-x 1 root root 1424 Apr 15 2020 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Feb 21 2022 35_fwupd
-rwxr-xr-x 1 root root 858 May 25 2020 40_custom
-rwxr-xr-x 1 root root 216 Apr 15 2020 41_custom
===================== sda3/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "lancer mes isos_gpt" {
insmod part_gpt
search --set=root --file /conf/grubiso20-04.cfg
search -l --set res ISOS20-04 # ajouter : res est initialisé à hd0,gpt4 (ISOS20-04)
export res # export pour grubiso20-04 (res=root !!!)
configfile ($res)/conf/grubiso20-04.cfg
}
menuentry "lancer mes isos_msdos" {
insmod part_msdos
search --set=root --file /conf/grubiso.cfg
search -l --set res ISOS # ajoutée : res est initialisé à hd4,msdos16 (ISOS)
export res # export pour grubiso (res=root !!! double emploi)
configfile ($res)/conf/grubiso.cfg
}
====================== sda6/boot/grub/grub.cfg (filtered) ======================
Ubuntu 000b2bfd-2dd6-409a-be78-7c0c2d7ab6de
Ubuntu 18.04.6 LTS (18.04) (on sda2) b1e72033-59f5-47fa-84fa-5242a2580ed0
Ubuntu 20.04.6 LTS (20.04) (on sda3) 525a0522-f476-4670-bc78-063abbf871c5
Ubuntu 18.04.6 LTS (18.04) (on sdb1) c14de089-0371-46f3-829f-b3d2e715d031
Ubuntu 20.04.1 LTS (20.04) (on sdb6) 8d4a38f2-6178-421b-88b4-d24f5aefdf36
UBUNTU 22.04.3 LTS (22.04) (on sdb7) 4d12e299-3caa-488a-bff7-92286faf43cb
Ubuntu 22.10 (22.10) (on sdb8) 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
Ubuntu 20.04.6 LTS (20.04) (on sdc12) cb4b4845-d512-4828-9ec8-f018eee5c3de
Ubuntu 22.04.2 LTS (22.04) (on sdc13) bea957e7-6100-494d-ae0e-3deeeba8f5b1
Ubuntu 22.04.1 LTS (22.04) (on sdc14) f52a6351-a90f-446a-94a0-c96279adba2c
Ubuntu 16.04.7 LTS (16.04) (on sdc5) a17886e2-7520-42fb-bb3c-7b43781cf5bc
Ubuntu 20.04.5 LTS (20.04) (on sdc6) f77c83f0-a0dd-4805-bf13-942e65290a72
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda6/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=000b2bfd-2dd6-409a-be78-7c0c2d7ab6de / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=34D9-A436 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
======================= sda6/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda6: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
349.473339081 = 375.244140544 boot/grub/grub.cfg 1
350.576324463 = 376.428462080 boot/vmlinuz 1
310.758785248 = 333.674704896 boot/vmlinuz-5.13.0-19-generic 2
350.576324463 = 376.428462080 boot/vmlinuz-6.2.0-39-generic 1
310.758785248 = 333.674704896 boot/vmlinuz.old 2
351.457103729 = 377.374191616 boot/initrd.img 1
349.626922607 = 375.409049600 boot/initrd.img-5.13.0-19-generic 1
351.457103729 = 377.374191616 boot/initrd.img-6.2.0-39-generic 1
349.626922607 = 375.409049600 boot/initrd.img.old 1
===================== sda6: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Dec 18 2022 10_linux
-rwxr-xr-x 1 root root 43031 Sep 2 2021 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec 18 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Dec 18 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Sep 2 2021 40_custom
-rwxr-xr-x 1 root root 215 Dec 18 2022 41_custom
====================== sdb1/boot/grub/grub.cfg (filtered) ======================
Ubuntu c14de089-0371-46f3-829f-b3d2e715d031
Ubuntu 16.04.7 LTS (16.04) (sur sda10) 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
Ubuntu 16.04.7 LTS (16.04) (sur sda12) cb9be900-e560-4c86-aa5c-8842b40fee00
Ubuntu Lunar Lobster (development branch) (23.04) (sur sda18) 02fce1ae-a04c-44e5-9df9-11a08369297b
Ubuntu 18.04.6 LTS (18.04) (sur sda2) adb3563a-ddba-4f75-8e82-7df3e3d2a4a5
Ubuntu 16.04.7 LTS (16.04) (sur sda7) c63335c7-be09-4782-978c-dff6cce2be94
Ubuntu 16.04.6 LTS (16.04) (sur sda9) d4b0b586-0b8e-457e-b492-78c272d1954f
Windows NT/2000/XP (sur sdb1) 0AF8F8ED4E45274B
Ubuntu 20.04.6 LTS (20.04) (sur sdb12) cb4b4845-d512-4828-9ec8-f018eee5c3de
Ubuntu 22.04.2 LTS (22.04) (sur sdb13) bea957e7-6100-494d-ae0e-3deeeba8f5b1
Ubuntu 22.04.1 LTS (22.04) (sur sdb14) f52a6351-a90f-446a-94a0-c96279adba2c
Ubuntu 16.04.7 LTS (16.04) (sur sdb5) a17886e2-7520-42fb-bb3c-7b43781cf5bc
Ubuntu 20.04.5 LTS (20.04) (sur sdb6) f77c83f0-a0dd-4805-bf13-942e65290a72
Windows NT/2000/XP (sur sdc1) 78684472684430E4
Ubuntu 18.04.6 LTS (18.04) (sur sdc10) 3aabc8ae-d129-419c-bb5a-1292d98ec0f6
Ubuntu 20.04.1 LTS (20.04) (sur sdd6) 8d4a38f2-6178-421b-88b4-d24f5aefdf36
Ubuntu 22.04.2 LTS (22.04) (sur sdd7) 4d12e299-3caa-488a-bff7-92286faf43cb
Ubuntu 22.10 (22.10) (sur sdd8) 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
Ubuntu 18.04.5 LTS (18.04) (sur sde2) b1e72033-59f5-47fa-84fa-5242a2580ed0
Ubuntu 20.04.5 LTS (20.04) (sur sde3) 525a0522-f476-4670-bc78-063abbf871c5
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
Ubuntu Jammy Jellyfish (development branch) (22.04) (sur sdd7) 69d86b10-6d19-4900-85f2-55dd8d460b01
========================== sdb1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=c14de089-0371-46f3-829f-b3d2e715d031 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda2 during installation
LABEL=home_U18.04-d1 /home ext4 defaults 0 2
LABEL=filmLB /media/FilmLB ext4 defaults,nofail 0 2
# /var was on /dev/sda5 during installation
LABEL=var_U18.04-d1 /var ext4 defaults 0 2
/swapfile none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=ISOS /media/ISOS ext4 defaults,nofail 0
======================= sdb1/etc/default/grub (filtered) =======================
GRUB_DEFAULT="lancer mes isos"
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_TIMEOUT=5
==================== sdb1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
36.436530590 = 39.123426816 boot/grub/grub.cfg 5
20.275474072 = 21.770624512 boot/grub/i386-pc/core.img 1
8.492213726 = 9.118445056 boot/vmlinuz-4.15.0-204-generic 2
9.195415020 = 9.873501696 boot/vmlinuz-4.15.0-206-generic 1
7.523543835 = 8.078343680 boot/vmlinuz-4.15.0-211-generic 2
7.523543835 = 8.078343680 vmlinuz 2
9.195415020 = 9.873501696 vmlinuz.old 1
6.742213726 = 7.239396864 boot/initrd.img-4.15.0-204-generic 6
9.504165173 = 10.205019648 boot/initrd.img-4.15.0-206-generic 2
8.917804241 = 9.575419392 boot/initrd.img-4.15.0-211-generic 4
8.917804241 = 9.575419392 initrd.img 4
9.504165173 = 10.205019648 initrd.img.old 2
===================== sdb1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12808 Aug 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 Dec 5 2017 20_linux_xen
-rwxr-xr-x 1 root root 12059 Dec 5 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 Dec 5 2017 30_uefi-firmware
-rwxr-xr-x 1 jpb jpb 947 Nov 9 2021 40_custom
-rw-r--r-- 1 root root 4264 May 3 2020 40_custom.sav
-rwxr-xr-x 1 root root 216 Dec 5 2017 41_custom
===================== sdb1/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Ubuntu Jammy Jellyfish (development branch) (22.04) (sur /dev/sdd7)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-69d86b10-6d19-4900-85f2-55dd8d460b01' {
insmod part_msdos
insmod ext2
set root='hd3,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos7 --hint-efi=hd3,msdos7 --hint-baremetal=ahci3,msdos7 69d86b10-6d19-4900-85f2-55dd8d460b01
else
search --no-floppy --fs-uuid --set=root 69d86b10-6d19-4900-85f2-55dd8d460b01
fi
linux /boot/vmlinuz-5.13.0-19-generic root=UUID=69d86b10-6d19-4900-85f2-55dd8d460b01 ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.13.0-19-generic
}
=================== sdb1/etc/grub.d/40_custom.sav (filtered) ===================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'AUTRES OS' {
true
}
menuentry 'U16.04-P10-64b Ubuntu 16.04.6 LTS (16.04) (sur /dev/sda10)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-21a7fb42-ce7c-47c3-a77c-e55dc3e12590' {
insmod part_msdos
insmod ext2
set root='hd0,msdos10'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos10 --hint-efi=hd0,msdos10 --hint-baremetal=ahci0,msdos10 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
else
search --no-floppy --fs-uuid --set=root 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
fi
linux /vmlinuz root=/dev/sda10
initrd /initrd.img
}
menuentry 'M16.04-a12-64b Ubuntu 16.04.5 LTS (16.04) (sur /dev/sda12)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-cb9be900-e560-4c86-aa5c-8842b40fee00' {
insmod part_msdos
insmod ext2
set root='hd0,msdos12'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos12 --hint-efi=hd0,msdos12 --hint-baremetal=ahci0,msdos12 cb9be900-e560-4c86-aa5c-8842b40fee00
else
search --no-floppy --fs-uuid --set=root cb9be900-e560-4c86-aa5c-8842b40fee00
fi
linux /vmlinuz root=/dev/sda12
initrd /initrd.img
}
menuentry 'U14.04-a5-64b Ubuntu 14.04.5 LTS (14.04) (sur /dev/sda5)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-ed6801f3-ddfe-46ff-b3e9-83219cd58ca9' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ed6801f3-ddfe-46ff-b3e9-83219cd58ca9
else
search --no-floppy --fs-uuid --set=root ed6801f3-ddfe-46ff-b3e9-83219cd58ca9
fi
linux /vmlinuz root=/dev/sda5
initrd /initrd.img
}
menuentry 'U16.04-a7-32b Ubuntu 16.04.5 LTS (16.04) (sur /dev/sda7)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-c63335c7-be09-4782-978c-dff6cce2be94' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 c63335c7-be09-4782-978c-dff6cce2be94
else
search --no-floppy --fs-uuid --set=root c63335c7-be09-4782-978c-dff6cce2be94
fi
linux /vmlinuz root=/dev/sda7
initrd /initrd.img
}
menuentry 'X16.04-a9-32b Ubuntu 16.04.6 LTS (16.04) (sur /dev/sda9)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-d4b0b586-0b8e-457e-b492-78c272d1954f' {
insmod part_msdos
insmod ext2
set root='hd0,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos9 --hint-efi=hd0,msdos9 --hint-baremetal=ahci0,msdos9 d4b0b586-0b8e-457e-b492-78c272d1954f
else
search --no-floppy --fs-uuid --set=root d4b0b586-0b8e-457e-b492-78c272d1954f
fi
linux /vmlinuz root=/dev/sda9
initrd /initrd.img
}
menuentry 'gnome Ubuntu 17.04 (17.04) (sur /dev/sdc9)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-3e774a44-b817-4b60-964c-46d4808d17ef' {
insmod part_msdos
insmod ext2
set root='hd2,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos9 --hint-efi=hd2,msdos9 --hint-baremetal=ahci2,msdos9 3e774a44-b817-4b60-964c-46d4808d17ef
else
search --no-floppy --fs-uuid --set=root 3e774a44-b817-4b60-964c-46d4808d17ef
fi
linux /vmlinuz root=/dev/sdc9
initrd /initrd.img
}
menuentry "lancer mes isos" {
search --set=root --file /conf/grubiso.cfg
search -l --set res ISOS # ajoutée : res est initialisé à hdx,msdosy qui est ISOS
export res # export pour grubisos
#configfile /conf/grubiso.cfg # remplacée par
configfile ($res)/conf/grubiso.cfg
}
====================== sdb6/boot/grub/grub.cfg (filtered) ======================
Ubuntu 8d4a38f2-6178-421b-88b4-d24f5aefdf36
### END /etc/grub.d/30_uefi-firmware ###
lancer mes isos_gpt
lancer mes isos_msdos
========================== sdb6/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sde3 during installation
UUID=525a0522-f476-4670-bc78-063abbf871c5 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=ISOS /media/ISOS ext4 defaults,nofail 0 2
LABEL=ISOS20-04 /media/ISOS20-04 ext4 defaults,nofail 0 2
# swap was on /dev/sda6 during installation
# swap was on /dev/sda8 during installation
# swap was on /dev/sdb6 during installation
# swap was on /dev/sdc10 during installation
======================= sdb6/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdb6: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
87.170566559 = 93.598683136 boot/grub/grub.cfg 1
78.224731445 = 83.993165824 boot/grub/i386-pc/core.img 1
73.070453644 = 78.458802176 boot/vmlinuz 1
81.390762329 = 87.392665600 boot/vmlinuz-5.4.0-58-generic 2
73.070453644 = 78.458802176 boot/vmlinuz-5.4.0-62-generic 1
81.390762329 = 87.392665600 boot/vmlinuz.old 2
80.188854218 = 86.102126592 boot/initrd.img 3
84.731166840 = 90.979397632 boot/initrd.img-5.4.0-58-generic 5
80.188854218 = 86.102126592 boot/initrd.img-5.4.0-62-generic 3
84.731166840 = 90.979397632 boot/initrd.img.old 5
===================== sdb6: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17622 Aug 17 2020 10_linux
-rwxr-xr-x 1 root root 42359 Aug 17 2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 Apr 15 2020 20_linux_xen
-rw-r--r-- 1 root root 12059 Apr 15 2020 30_os-prober
-rwxr-xr-x 1 root root 1424 Apr 15 2020 30_uefi-firmware
-rwxr-xr-x 1 root root 858 May 25 2020 40_custom
-rwxr-xr-x 1 root root 216 Apr 15 2020 41_custom
===================== sdb6/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "lancer mes isos_gpt" {
insmod part_gpt
search --set=root --file /conf/grubiso20-04.cfg
search -l --set res ISOS20-04 # ajouter : res est initialisé à hd0,gpt4 (ISOS20-04)
export res # export pour grubiso20-04 (res=root !!!)
configfile ($res)/conf/grubiso20-04.cfg
}
menuentry "lancer mes isos_msdos" {
insmod part_msdos
search --set=root --file /conf/grubiso.cfg
search -l --set res ISOS # ajoutée : res est initialisé à hd4,msdos16 (ISOS)
export res # export pour grubiso (res=root !!! double emploi)
configfile ($res)/conf/grubiso.cfg
}
====================== sdb7/boot/grub/grub.cfg (filtered) ======================
Ubuntu 4d12e299-3caa-488a-bff7-92286faf43cb
Ubuntu 18.04.6 LTS (18.04) (on sda2) b1e72033-59f5-47fa-84fa-5242a2580ed0
Ubuntu 20.04.6 LTS (20.04) (on sda3) 525a0522-f476-4670-bc78-063abbf871c5
Ubuntu Jammy Jellyfish (development branch) (22.04) (on sda6) 000b2bfd-2dd6-409a-be78-7c0c2d7ab6de
Ubuntu 18.04.6 LTS (18.04) (on sdb1) c14de089-0371-46f3-829f-b3d2e715d031
Ubuntu 20.04.1 LTS (20.04) (on sdb6) 8d4a38f2-6178-421b-88b4-d24f5aefdf36
Ubuntu 22.10 (22.10) (on sdb8) 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
Ubuntu 18.04.6 LTS (18.04) (on sdc10) 3aabc8ae-d129-419c-bb5a-1292d98ec0f6
Ubuntu 16.04.7 LTS (16.04) (on sdd10) 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
Ubuntu 16.04.7 LTS (16.04) (on sdd12) cb9be900-e560-4c86-aa5c-8842b40fee00
Ubuntu 23.04 (23.04) (on sdd18) 02fce1ae-a04c-44e5-9df9-11a08369297b
Ubuntu 18.04.6 LTS (18.04) (on sdd2) adb3563a-ddba-4f75-8e82-7df3e3d2a4a5
Ubuntu 16.04.7 LTS (16.04) (on sdd7) c63335c7-be09-4782-978c-dff6cce2be94
Ubuntu 16.04.6 LTS (16.04) (on sdd9) d4b0b586-0b8e-457e-b492-78c272d1954f
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
lancer mes isos_gpt
lancer mes isos_msdos
Grml Rescue System (lunar-desktop-amd64.iso)
========================== sdb7/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdd7 during installation
LABEL=U22.04-d7 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=ISOS /media/ISOS ext4 defaults,nofail 0 2
LABEL=ISOS20-04 /media/ISOS20-04 ext4 defaults,nofail 0 2
# swap was on /dev/sda6 during installation
# swap was on /dev/sda8 during installation
# swap was on /dev/sdb14 during installation
# swap was on /dev/sdc9 during installation
======================= sdb7/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 splash"
GRUB_CMDLINE_LINUX=""
==================== sdb7: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
125.621562958 = 134.885126144 boot/grub/grub.cfg 1
122.454738617 = 131.484774400 boot/grub/i386-pc/core.img 1
141.251583099 = 151.667732480 boot/vmlinuz 1
116.542007446 = 125.136027648 boot/vmlinuz-5.15.0-60-generic 2
141.251583099 = 151.667732480 boot/vmlinuz-5.19.0-32-generic 1
116.542007446 = 125.136027648 boot/vmlinuz.old 2
159.988033295 = 171.785842688 boot/initrd.img 148
156.574649811 = 168.120750080 boot/initrd.img-5.15.0-60-generic 199
159.988033295 = 171.785842688 boot/initrd.img-5.19.0-32-generic 148
156.574649811 = 168.120750080 boot/initrd.img.old 199
===================== sdb7: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Jan 10 2022 10_linux
-rwxr-xr-x 1 root root 43031 Sep 2 2021 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Feb 18 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Jan 10 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Jan 17 2022 35_fwupd
-rwxr-xr-x 1 root root 1682 Apr 7 2023 40_custom
-rwxr-xr-x 1 root root 215 Jan 10 2022 41_custom
===================== sdb7/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "lancer mes isos_gpt" {
insmod part_gpt
search --set=root --file /conf/grubiso20-04.cfg
search -l --set res ISOS20-04 # ajouter : res est initialisé à hd0,gpt4 (ISOS20-04)
export res # export pour grubiso20-04 (res=root !!!)
configfile ($res)/conf/grubiso20-04.cfg
}
menuentry "lancer mes isos_msdos" {
insmod part_msdos
search --set=root --file /conf/grubiso.cfg
search -l --set res ISOS # ajoutée : res est initialisé à hd4,msdos16 (ISOS)
export res # export pour grubiso (res=root !!! double emploi)
configfile ($res)/conf/grubiso.cfg
}
menuentry "Grml Rescue System (lunar-desktop-amd64.iso)" {
# /dev/sdd7
insmod part_msdos
insmod ext2
set root='hd3,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos7 --hint-efi=hd3,msdos7 --hint-baremetal=ahci3,msdos7 4d12e299-3caa-488a-bff7-92286faf43cb
else
search --no-floppy --fs-uuid --set=root 4d12e299-3caa-488a-bff7-92286faf43cb
fi
iso_path="/boot/grml/lunar-desktop-amd64.iso"
export iso_path
kernelopts=" "
export kernelopts
# support booting recent GRUB versions on UEFI systems
rmmod tpm
loopback loop "/boot/grml/lunar-desktop-amd64.iso"
set root=(loop)
configfile /boot/grub/loopback.cfg
}
====================== sdb8/boot/grub/grub.cfg (filtered) ======================
Ubuntu 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
### END /etc/grub.d/30_uefi-firmware ###
========================== sdb8/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdd8 during installation
UUID=188ab1f4-7f7f-4e74-83d0-8adcba9f9809 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sde1 during installation
UUID=34D9-A436 /boot/efi vfat umask=0077 0 1
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=ISOS /media/ISOS ext4 defaults,nofail 0 2
LABEL=ISOS20-04 /media/ISOS20-04 ext4 defaults,nofail 0 2
/swapfile none swap sw 0 0
# swap was on /dev/sda6 during installation
# swap was on /dev/sda8 during installation
# swap was on /dev/sdc9 during installation
======================= sdb8/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdb8: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
168.046741486 = 180.438814720 boot/grub/grub.cfg 1
172.320072174 = 185.027268608 boot/grub/i386-pc/core.img 1
174.850582123 = 187.744382976 boot/vmlinuz 2
162.741207123 = 174.742040576 boot/vmlinuz-5.19.0-21-generic 2
174.850582123 = 187.744382976 boot/vmlinuz-5.19.0-38-generic 2
162.741207123 = 174.742040576 boot/vmlinuz.old 2
171.611701965 = 184.266661888 boot/initrd.img 3
167.916358948 = 180.298817536 boot/initrd.img-5.19.0-21-generic 1
171.611701965 = 184.266661888 boot/initrd.img-5.19.0-38-generic 3
167.916358948 = 180.298817536 boot/initrd.img.old 1
===================== sdb8: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Sep 19 2022 10_linux
-rwxr-xr-x 1 root root 43263 Sep 19 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Sep 19 2022 20_linux_xen
-rw-r--r-- 1 root root 13369 Sep 19 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Sep 19 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Aug 30 2022 35_fwupd
-rwxr-xr-x 1 root root 214 Sep 19 2022 40_custom
-rwxr-xr-x 1 root root 215 Sep 19 2022 41_custom
=========================== sdc1/boot.ini (filtered) ===========================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP \90dition familiale" /noexecute=optin /fastdetect
===================== sdc10/boot/grub/grub.cfg (filtered) ======================
Ubuntu 3aabc8ae-d129-419c-bb5a-1292d98ec0f6
### END /etc/grub.d/30_uefi-firmware ###
========================== sdc10/etc/fstab (filtered) ==========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdc11 during installation
UUID=3aabc8ae-d129-419c-bb5a-1292d98ec0f6 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc10 during installation
UUID=722d52ca-7c00-4e99-a810-9db3288fac4a none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
UUID="c5a33375-b59d-4451-9b5f-e3c1bdf3d5c0" /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
# swap was on /dev/sda8 during installation
# swap was on /dev/sdb5 during installation
====================== sdc10/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_OS_PROBER_SKIP_LIST="21a7fb42-ce7c-47c3-a77c-e55dc3e12590@/dev/sda10,cb9be900-e560-4c86-aa5c-8842b40fee00@/dev/sda12,adb3563a-ddba-4f75-8e82-7df3e3d2a4a5@/dev/sda2,ed6801f3-ddfe-46ff-b3e9-83219cd58ca9@/dev/sda5,c63335c7-be09-4782-978c-dff6cce2be94@/dev/sda7,d4b0b586-0b8e-457e-b492-78c272d1954f@/dev/sda9,a17886e2-7520-42fb-bb3c-7b43781cf5bc@/dev/sdb5,3e774a44-b817-4b60-964c-46d4808d17ef@/dev/sdc9"
=================== sdc10: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
724.731185913 = 778.174185472 boot/grub/grub.cfg 2
727.323837280 = 780.958023680 boot/grub/i386-pc/core.img 1
715.521541595 = 768.285405184 boot/vmlinuz-4.15.0-162-generic 2
732.568428040 = 786.589360128 boot/vmlinuz-4.15.0-204-generic 1
710.841873169 = 763.260649472 boot/vmlinuz-4.15.0-211-generic 1
710.841873169 = 763.260649472 vmlinuz 1
732.568428040 = 786.589360128 vmlinuz.old 1
733.205074310 = 787.272953856 boot/initrd.img-4.15.0-162-generic 3
715.843868256 = 768.631500800 boot/initrd.img-4.15.0-204-generic 2
715.865230560 = 768.654438400 boot/initrd.img-4.15.0-211-generic 3
715.865230560 = 768.654438400 initrd.img 3
715.843868256 = 768.631500800 initrd.img.old 2
===================== sdc10: ls -l /etc/grub.d/ (filtered) =====================
-rwxr-xr-x 1 root root 12808 Nov 14 2020 10_linux
-rwxr-xr-x 1 root root 11298 Dec 5 2017 20_linux_xen
-rw-r--r-- 1 root root 12059 Dec 5 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 Dec 5 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Dec 5 2017 40_custom
-rwxr-xr-x 1 root root 216 Dec 5 2017 41_custom
====================== sdd2/boot/grub/grub.cfg (filtered) ======================
Ubuntu adb3563a-ddba-4f75-8e82-7df3e3d2a4a5
Ubuntu 16.04.7 LTS (16.04) (sur sda10) 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
Ubuntu 16.04.7 LTS (16.04) (sur sda12) cb9be900-e560-4c86-aa5c-8842b40fee00
Ubuntu 23.04 (23.04) (sur sda18) 02fce1ae-a04c-44e5-9df9-11a08369297b
Ubuntu 16.04.7 LTS (16.04) (sur sda7) c63335c7-be09-4782-978c-dff6cce2be94
Ubuntu 16.04.6 LTS (16.04) (sur sda9) d4b0b586-0b8e-457e-b492-78c272d1954f
Windows NT/2000/XP (sur sdb1) 0AF8F8ED4E45274B
Ubuntu 20.04.6 LTS (20.04) (sur sdb12) cb4b4845-d512-4828-9ec8-f018eee5c3de
Ubuntu 22.04.2 LTS (22.04) (sur sdb13) bea957e7-6100-494d-ae0e-3deeeba8f5b1
Ubuntu 22.04.1 LTS (22.04) (sur sdb14) f52a6351-a90f-446a-94a0-c96279adba2c
Ubuntu 16.04.7 LTS (16.04) (sur sdb5) a17886e2-7520-42fb-bb3c-7b43781cf5bc
Ubuntu 20.04.5 LTS (20.04) (sur sdb6) f77c83f0-a0dd-4805-bf13-942e65290a72
Windows NT/2000/XP (sur sdc1) 78684472684430E4
Ubuntu 18.04.6 LTS (18.04) (sur sdc10) 3aabc8ae-d129-419c-bb5a-1292d98ec0f6
Ubuntu 18.04.6 LTS (18.04) (sur sdd1) c14de089-0371-46f3-829f-b3d2e715d031
Ubuntu 20.04.1 LTS (20.04) (sur sdd6) 8d4a38f2-6178-421b-88b4-d24f5aefdf36
Ubuntu 22.04.3 LTS (22.04) (sur sdd7) 4d12e299-3caa-488a-bff7-92286faf43cb
Ubuntu 22.10 (22.10) (sur sdd8) 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
Ubuntu 18.04.6 LTS (18.04) (sur sde2) b1e72033-59f5-47fa-84fa-5242a2580ed0
Ubuntu 20.04.6 LTS (20.04) (sur sde3) 525a0522-f476-4670-bc78-063abbf871c5
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
{
Menu du disque B
Menu du dique C
{
===>> Distribs lancées depuis leur fichier 'iso' iso'
========================== sdd2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation sda2
UUID=adb3563a-ddba-4f75-8e82-7df3e3d2a4a5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation sda6
UUID=81b7d41d-574c-4d4b-8740-3e6c55400674 none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
# swap was on /dev/sda8 during installation
# swap was on /dev/sdb5 during installation
# swap was on /dev/sdc10 during installation
======================= sdd2/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdd2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
465.433598042 = 499.755520512 boot/grub/grub.cfg 6
450.527050495 = 483.749736960 boot/grub/i386-pc/core.img 1
433.687180042 = 465.668063744 boot/vmlinuz-4.15.0-211-generic 1
437.265301228 = 469.510042112 boot/vmlinuz-4.15.0-213-generic 1
437.265301228 = 469.510042112 vmlinuz 1
433.687180042 = 465.668063744 vmlinuz.old 1
434.280849934 = 466.305511936 boot/initrd.img-4.15.0-211-generic 5
437.935261250 = 470.229406208 boot/initrd.img-4.15.0-213-generic 3
437.935261250 = 470.229406208 initrd.img 3
434.280849934 = 466.305511936 initrd.img.old 5
===================== sdd2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12808 Nov 14 2020 10_linux
-rwxr-xr-x 1 root root 11298 Dec 5 2017 20_linux_xen
-rwxr-xr-x 1 root root 12059 Dec 5 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 Dec 5 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 890 Nov 28 2018 40_custom
-rwxr-xr-x 1 root root 216 Dec 5 2017 41_custom
===================== sdd2/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
# true permet d'afficher la ligne de titre (i ci une ligne vide pour 'aérer' le menu) sans rien faire d'autre
menuentry " " {
true
}
menuentry "Menu du disque B" {
set root='hd1,msdos10'
configfile /boot/grub/grub.cfg
}
# appel du grub de C
menuentry "Menu du dique C" {
set root='hd2,msdos11'
configfile /boot/grub/grub.cfg
}
# true permet d'afficher la ligne de titre (ici une ligne vide pour 'aérer' le menu) sans rien faire d'autre
menuentry " " {
true
}
# appel d'un menu sur Data ( disque C ,partition5 )
menuentry "===>> Distribs lancées depuis leur fichier 'iso'" {
set root='hd2,msdos5'
configfile /informatique/isos/00_isoboot.cfg
}
====================== sdd7/boot/grub/grub.cfg (filtered) ======================
Ubuntu c63335c7-be09-4782-978c-dff6cce2be94
### END /etc/grub.d/30_uefi-firmware ###
========================== sdd7/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=c63335c7-be09-4782-978c-dff6cce2be94 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation supprimée le 2016-04-22
# swap was on /dev/sda8 during installation
UUID=a1516336-9bb7-4c9f-b63e-9cab2d58e8f1 none swap sw 0 0
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=Data /media/Data ext4 defaults,nofail 0 2
======================= sdd7/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdd7: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
586.676704407 = 629.939314688 boot/grub/grub.cfg 1
588.368152618 = 631.755493376 boot/grub/i386-pc/core.img 1
590.078994751 = 633.592496128 boot/vmlinuz-4.4.0-197-generic 7
592.169410706 = 635.837063168 boot/vmlinuz-4.4.0-198-generic 1
590.960121155 = 634.538598400 boot/vmlinuz-4.4.0-210-generic 1
590.960121155 = 634.538598400 vmlinuz 1
592.169410706 = 635.837063168 vmlinuz.old 1
590.126930237 = 633.643966464 boot/initrd.img-4.4.0-197-generic 2
591.772373199 = 635.410747392 boot/initrd.img-4.4.0-198-generic 14
591.781364441 = 635.420401664 boot/initrd.img-4.4.0-210-generic 17
591.781364441 = 635.420401664 initrd.img 17
591.772373199 = 635.410747392 initrd.img.old 14
===================== sdd7: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12627 Aug 25 2020 10_linux
-rwxr-xr-x 1 root root 11082 Apr 16 2016 20_linux_xen
-rw-r--r-- 1 root root 11692 Apr 16 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Apr 16 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 16 2016 40_custom
-rwxr-xr-x 1 root root 216 Apr 16 2016 41_custom
====================== sdd9/boot/grub/grub.cfg (filtered) ======================
Ubuntu d4b0b586-0b8e-457e-b492-78c272d1954f
### END /etc/grub.d/30_uefi-firmware ###
========================== sdd9/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb9 during installation
UUID=d4b0b586-0b8e-457e-b492-78c272d1954f / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb11 during installation
# swap was on /dev/sda6 during installation
# swap was on /dev/sdb6 during installation
# swap was on /dev/sdb8 during installation
# swap was on /dev/sdc5 during installation
======================= sdd9/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdd9: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
652.743328094 = 700.877811712 boot/grub/grub.cfg 1
651.049903870 = 699.059511296 boot/grub/i386-pc/core.img 1
654.162067413 = 702.401171456 boot/vmlinuz-4.4.0-139-generic 1
658.127651215 = 706.659184640 boot/vmlinuz-4.4.0-173-generic 1
644.107757568 = 691.605438464 boot/vmlinuz-4.4.0-28-generic 1
647.813171387 = 695.584096256 boot/vmlinuz-4.4.0-83-generic 1
652.353099823 = 700.458807296 boot/vmlinuz-4.4.0-97-generic 1
658.127651215 = 706.659184640 vmlinuz 1
654.162067413 = 702.401171456 vmlinuz.old 1
658.803035736 = 707.384373248 boot/initrd.img-4.4.0-139-generic 2
658.875339508 = 707.462008832 boot/initrd.img-4.4.0-173-generic 2
658.651126862 = 707.221262336 boot/initrd.img-4.4.0-28-generic 2
658.639083862 = 707.208331264 boot/initrd.img-4.4.0-83-generic 2
658.632228851 = 707.200970752 boot/initrd.img-4.4.0-97-generic 2
658.875339508 = 707.462008832 initrd.img 2
658.803035736 = 707.384373248 initrd.img.old 2
===================== sdd9: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12512 May 20 2017 10_linux
-rwxr-xr-x 1 root root 11082 Apr 16 2016 20_linux_xen
-rw-r--r-- 1 root root 11692 Apr 16 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Apr 16 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 16 2016 40_custom
-rwxr-xr-x 1 root root 216 Apr 16 2016 41_custom
===================== sdd10/boot/grub/grub.cfg (filtered) ======================
Ubuntu 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
### END /etc/grub.d/30_uefi-firmware ###
========================== sdd10/etc/fstab (filtered) ==========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb10 during installation
UUID=21a7fb42-ce7c-47c3-a77c-e55dc3e12590 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb6 during installation
UUID=81b7d41d-574c-4d4b-8740-3e6c55400674 none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
#swap was on /dev/sda6 during installation
#swap was on /dev/sdb8 during installation
#swap was on /dev/sdc5 during installation
====================== sdd10/etc/default/grub (filtered) =======================
GRUB_DEFAULT=saved
GRUB_SAVEDEFAULT=true
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
=================== sdd10: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
667.917568207 = 717.171027968 boot/grub/grub.cfg 1
684.710826874 = 735.202652160 boot/vmlinuz-4.4.0-201-generic 1
698.310112000 = 749.804773376 boot/vmlinuz-4.4.0-210-generic 1
698.310112000 = 749.804773376 vmlinuz 1
684.710826874 = 735.202652160 vmlinuz.old 1
699.750972748 = 751.351885824 boot/initrd.img-4.4.0-201-generic 3
700.391597748 = 752.039751680 boot/initrd.img-4.4.0-210-generic 6
700.391597748 = 752.039751680 initrd.img 6
699.750972748 = 751.351885824 initrd.img.old 3
===================== sdd10: ls -l /etc/grub.d/ (filtered) =====================
-rwxr-xr-x 1 root root 12627 Nov 17 2020 10_linux
-rwxr-xr-x 1 root root 11082 Apr 16 2016 20_linux_xen
-rw-r--r-- 1 root root 11692 Apr 16 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Apr 16 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 892 Sep 19 2016 40_custom
-rwxr-xr-x 1 root root 216 Apr 16 2016 41_custom
==================== sdd10/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
#couleur de la police dans le menu de grub (white,blue,green,light-green,light-gray etc)
#menu_color_normal=couleur ligne non sélectionnée/couleur du fond quand il n'y a pas d'image
set menu_color_normal=white/black
#menu_color_normal_highlight=couleur ligne sélectionnée/couleur du fond quand il n'y a pas d'image
set menu_color_highlight=black/white
#couleur de la police dans l'édition du menu de grub
#color_normal=en édition couleur ligne non sélectionnée/couleur du fond quand il n'y a pas d'image
set color_normal=white/black
#color_highlight=en édition couleur ligne sélectionnée/couleur du fond quand il n'y a pas d'image
set color_highlight=black/white
===================== sdd12/boot/grub/grub.cfg (filtered) ======================
Ubuntu cb9be900-e560-4c86-aa5c-8842b40fee00
### END /etc/grub.d/30_uefi-firmware ###
========================== sdd12/etc/fstab (filtered) ==========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda12 during installation
UUID=cb9be900-e560-4c86-aa5c-8842b40fee00 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
# swap was on /dev/sda8 during installation
UUID=a1516336-9bb7-4c9f-b63e-9cab2d58e8f1 none swap sw 0 0
# swap was on /dev/sdb5 during installation
====================== sdd12/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
=================== sdd12: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
717.363563538 = 770.263261184 boot/grub/grub.cfg 1
710.957874298 = 763.385204736 boot/grub/i386-pc/core.img 1
717.994956970 = 770.941214720 boot/vmlinuz-4.4.0-139-generic 1
717.248981476 = 770.140229632 boot/vmlinuz-4.4.0-197-generic 1
711.570163727 = 764.042645504 boot/vmlinuz-4.4.0-59-generic 1
717.248981476 = 770.140229632 vmlinuz 1
717.994956970 = 770.941214720 vmlinuz.old 1
720.322948456 = 773.440876544 boot/initrd.img-4.4.0-139-generic 4
719.460933685 = 772.515295232 boot/initrd.img-4.4.0-197-generic 2
719.379615784 = 772.427980800 boot/initrd.img-4.4.0-59-generic 2
719.460933685 = 772.515295232 initrd.img 2
720.322948456 = 773.440876544 initrd.img.old 4
===================== sdd12: ls -l /etc/grub.d/ (filtered) =====================
-rwxr-xr-x 1 root root 12627 Nov 17 2020 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rw-r--r-- 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
===================== sdd18/boot/grub/grub.cfg (filtered) ======================
Ubuntu 02fce1ae-a04c-44e5-9df9-11a08369297b
Ubuntu 16.04.7 LTS (16.04) (on sda10) 21a7fb42-ce7c-47c3-a77c-e55dc3e12590
Ubuntu 16.04.7 LTS (16.04) (on sda12) cb9be900-e560-4c86-aa5c-8842b40fee00
Ubuntu 18.04.6 LTS (18.04) (on sda2) adb3563a-ddba-4f75-8e82-7df3e3d2a4a5
Ubuntu 16.04.7 LTS (16.04) (on sda7) c63335c7-be09-4782-978c-dff6cce2be94
Ubuntu 16.04.6 LTS (16.04) (on sda9) d4b0b586-0b8e-457e-b492-78c272d1954f
Windows NT/2000/XP (on sdb1) 0AF8F8ED4E45274B
Ubuntu 20.04.6 LTS (20.04) (on sdb12) cb4b4845-d512-4828-9ec8-f018eee5c3de
Ubuntu 22.04.2 LTS (22.04) (on sdb13) bea957e7-6100-494d-ae0e-3deeeba8f5b1
Ubuntu 22.04.1 LTS (22.04) (on sdb14) f52a6351-a90f-446a-94a0-c96279adba2c
Ubuntu 16.04.7 LTS (16.04) (on sdb5) a17886e2-7520-42fb-bb3c-7b43781cf5bc
Ubuntu 20.04.5 LTS (20.04) (on sdb6) f77c83f0-a0dd-4805-bf13-942e65290a72
Windows NT/2000/XP (on sdc1) 78684472684430E4
Ubuntu 18.04.6 LTS (18.04) (on sdc10) 3aabc8ae-d129-419c-bb5a-1292d98ec0f6
Ubuntu 18.04.6 LTS (18.04) (on sdd1) c14de089-0371-46f3-829f-b3d2e715d031
Ubuntu 20.04.1 LTS (20.04) (on sdd6) 8d4a38f2-6178-421b-88b4-d24f5aefdf36
Ubuntu 22.04.2 LTS (22.04) (on sdd7) 4d12e299-3caa-488a-bff7-92286faf43cb
Ubuntu 22.10 (22.10) (on sdd8) 188ab1f4-7f7f-4e74-83d0-8adcba9f9809
Ubuntu 18.04.6 LTS (18.04) (on sde2) b1e72033-59f5-47fa-84fa-5242a2580ed0
Ubuntu 20.04.5 LTS (20.04) (on sde3) 525a0522-f476-4670-bc78-063abbf871c5
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sdd18/etc/fstab (filtered) ==========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda18 during curtin installation
/dev/disk/by-uuid/02fce1ae-a04c-44e5-9df9-11a08369297b / ext4 defaults 0 1
/swap.img none swap sw 0 0
LABEL=Data /media/Data ext4 defaults,nofail 0 2
LABEL=SH /media/SH ext4 defaults,nofail 0 2
LABEL=ISOS /media/ISOS ext4 defaults,nofail 0 2
LABEL=ISOS20-04 /media/ISOS20-04 ext4 defaults,nofail 0 2
====================== sdd18/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
=================== sdd18: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
607.896968842 = 652.724400128 boot/grub/grub.cfg 1
601.695549011 = 646.065676288 boot/grub/i386-pc/core.img 1
612.284034729 = 657.434976256 boot/vmlinuz 1
601.939643860 = 646.327771136 boot/vmlinuz-6.2.0-19-generic 1
612.284034729 = 657.434976256 boot/vmlinuz-6.2.0-20-generic 1
601.939643860 = 646.327771136 boot/vmlinuz.old 1
620.975093842 = 666.766929920 boot/initrd.img 1
621.313591003 = 667.130388480 boot/initrd.img-6.2.0-19-generic 1
620.975093842 = 666.766929920 boot/initrd.img-6.2.0-20-generic 1
621.313591003 = 667.130388480 boot/initrd.img.old 1
===================== sdd18: ls -l /etc/grub.d/ (filtered) =====================
-rwxr-xr-x 1 root root 18683 Dec 9 2022 10_linux
-rwxr-xr-x 1 root root 43263 Dec 9 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 9 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec 9 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Dec 9 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 722 Feb 26 2023 35_fwupd
-rwxr-xr-x 1 root root 214 Dec 9 2022 40_custom
-rwxr-xr-x 1 root root 215 Dec 9 2022 41_custom
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown BootLoader on sdc11
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to remove grub-efi) and reinstall the grub2 of
sdb7 into the MBR of sdb.
Grub-efi would not be selected by default because legacy Windows detected.
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix
Blockers in case of suggested repair: __________________________________________
LegacyWindows detected. Please enable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB).
Confirmation request before suggested repair: __________________________________
LegacyWindows detected. The boot of your PC is in EFI mode. You may want to retry after changing it to BIOS-compatibility/CSM/Legacy mode.
Are you sure you want to continue anyway?
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your BIOS boot on sdb (ATA Samsung SSD 860) disk!
The boot of your PC is in UEFI mode. You may want to retry after changing it to BIOS-compatibility/CSM/Legacy mode.
paste.ubuntu.com ko ()
paste.debian.net ko ()PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#15 Le 14/12/2023, à 17:50
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
la clé que j'ai utilisée devait dater puisque c'est une version
Ubuntu Jammy Jellyfish (development branch)
qui a été installée en sda6
Dernière modification par ar barzh paour (Le 20/12/2023, à 13:53)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#16 Le 14/12/2023, à 18:23
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Puisque la clé fonctionne, c'est l'essentiel. Mais JAMMY c'est la 22.04 qui est la dernière version LTS
La structure de boot à découvrir pour toi.
===================================== UEFI =====================================
BIOS/UEFI firmware: F11(5.27) from American Megatrends International, LLC.
The firmware is EFI-compatible, and is set in EFI-mode for this installed-session.
SecureBoot disabled (confirmed by mokutil).
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001
Boot0001* ubuntu HD(1,GPT,2d5df5ee-4aa5-48d3-a007-f6b4a152ba0f,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)Le boot actuel est le N° 0001
On doit normalement booter en premier par le N° 0001 puis .... ( il n'y a pas encore de n° suivant).
On boote donc depuis un disque (HD) sur la partition 1 en GPT avec PUUID indiqué qui commence à l'adresse Hexa 800 et fini à l'adresse hexa 100000 en utilisant le fichier EFI\ubuntu\shimx64.efi.
C'est donc la partition SDA1
/dev/sda1: UUID="34D9-A436" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="2d5df5ee-4aa5-48d3-a007-f6b4a152ba0f"Dont le contenu est sans surprise
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfgTu as une sacrée collection d'O.S.
================================ 15 OS detected ================================
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.3 LTS on sdb7
OS#2: Ubuntu 18.04.6 LTS on sda2
OS#3: Ubuntu 20.04.6 LTS on sda3
OS#4: Ubuntu Jammy Jellyfish (development branch) on sda6
OS#5: Ubuntu 18.04.6 LTS on sdb1
OS#6: Ubuntu 20.04.1 LTS on sdb6
OS#7: Ubuntu 22.10 on sdb8
OS#8: Ubuntu 18.04.6 LTS on sdc10
OS#9: Ubuntu 16.04.7 LTS on sdd10
OS#10: Ubuntu 16.04.7 LTS on sdd12
OS#11: Ubuntu 23.04 on sdd18
OS#12: Ubuntu 18.04.6 LTS on sdd2
OS#13: Ubuntu 16.04.7 LTS on sdd7
OS#14: Ubuntu 16.04.6 LTS on sdd9
OS#15: Windows XP on sdc1Je suis inquiet pour le dernier de la liste qui me semble 100% legacy. Puisque tu dis que ta carte est 100% EFI, C' est très certainement fichu sauf à tenter avec refind. C'est toi qui voit.
Le ubuntu dirigeant est celui-ci
===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 000b2bfd-2dd6-409a-be78-7c0c2d7ab6de root hd0,gpt6
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfgPour répondre à ton problème
quand je ferais une mise à jour de grub à partir de ma version de travail 22.04.3 sdb7, le grub qui sera mis à jour est sdb7/boot/grub/grub.cfg
le grub est est lancé au reboot c'est sda/boot/grub/grub.cfg , ce menu ne sera donc pas à jourquelle manip me préconisez-vous ?
( encore une fois je ne comprends pas la façon de fonctionner de UEFI !!!)
EFI est comme le légacy, c'est le dernier installé qui gagne.
Tu n'aurais pas du faire une nouvelle installation mais seulement lancer un boot.repair en choisissant le ubuntu que tu veux réparer.
Mais comme tu es dans le ubuntu que tu voulais réparer, je te propose
Tu vas définir la partition de boot EFI dans ton fichier FSTAB actuel en y ajoutant ces deux lignes.
# /boot/efi was on /dev/sda1 during installation
UUID=34D9-A436 /boot/efi vfat umask=0077 0 1Note que je préfère que chaque disque dispose de sa partition EFI pour fonctionner sans les autres disques.
Puis tu montes la partition EFI.
sudo mount -avTu installes le logiciel EFI.
sudo apt install shim-signedet tu installes le grub efi
sudo grub-installLes éléments EFI
et tu lui fais découvrir les autres ubuntu.
sudo update-grubLes détails sont dans le chapitre de la 4.1
une nouvelle entrée dans la nvram devrait se créer et le fichier de configuration grub EFI sera modifié pour pointer vers ce ubuntu.
Nota. C'est dommage que je te propose d'installer un SHIM EFI. Cela serait nettement préférable que tu installes un REFIND. Tout serait traité d'un seul coup
Dernière modification par geole (Le 14/12/2023, à 19:13)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#17 Le 14/12/2023, à 19:22
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
merci geole pour tes analyses
je regarderais ça à tête reposé , là je sature
j'ai certainement des os que je pourrais supprimer c'est sur, je ne fais plus de tests sur les os "passés" comme je le faisais avant
à étudier :
ce qui me gène aussi c'est que mon OS ne se trouve pas sur le même disque que celui du boot
en cas de pépin sur l'un des disques , le tout est HS ?
j'aimais bien le fait de pouvoir booter indépendamment sur un disque , même si les autres était HS, là je ne sais pas si c'est possible
il faudrait les transformer en gpt ?
je suis un peu dépassé
Dernière modification par ar barzh paour (Le 15/12/2023, à 09:34)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#18 Le 14/12/2023, à 21:25
- geole
Re : [Résolu] changement de carte mère : disque non bootable
Réponse rapide sur quelques points.
- Rien ne presse.
- Une partition de boot EFI peut se créer dans un disque avec table de partition MS-DOS.
- Dans un premier temps, il peut n'y avoir qu'une partition FAT32 EFI pour booter tous les O.S
Comme tu l'as dit, si le disque qui l'héberge se scratche, il n'y a plus de boot. Mais cela se répare pas difficillement.
Il suffit de booter avec une live USB, lancer gparted et rétrécir une partition d'un disque de 36 Mo,
De créer une partition Fat32 avec cet espace libérè, de lui mettre le drapeau ESP, de quitter garted, puis.
Soit de lancer boot-repair en lui disant de choisir cette partition pour réparer et refabriquer un grub.
Soit d'installer refind en ne lui interdisant pas de s'installer dans cette partition.
- faut cinq secondes pour transformer un disque MS-DOS en disque GPT. Mais il faut ajouter l'installation du boot EFI s'il n'y en a pas dans un autre disque. Condition préalable: Le disque doit avoir moins de 129 partitions.
Si tu installes refind, tu peux supprimer tous les grub. Ce qui résoud pas mal de problèmes de compétition inter-grub.
Dernière modification par geole (Le 14/12/2023, à 21:49)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#19 Le 24/12/2023, à 16:24
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
@geole
je ne suis plus chez moi , donc loin du PC
je pense clôturer cette discussion et repartir l'année prochaine sur une autre, ce sera plus clair
merci pour ton aide
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#20 Le 19/02/2024, à 07:13
- ar barzh paour
Re : [Résolu] changement de carte mère : disque non bootable
Hello geole
https://forum.ubuntu-fr.org/viewtopic.p … #p22743803
résumé : passage en gpt des disques
maintenant, il faut que je me familiarise avec la gestion de l'EFI
je passe en résolu
merci pour ton aide
je passe en résolu
Dernière modification par ar barzh paour (Le 19/02/2024, à 07:13)
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 20.04, 22.04, 24.04 (en test )
Portable1 : ThinkPad P50 I7-6820HQ, 16G0 Ram W10-PRO( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne