- Accueil
- » Forum
- » WiFi
- » Wifi sur hp 6715s
Pages : 1
#1 Le 06/08/2009, à 01:23
- araok
Wifi sur hp 6715s
Bonjour à tous,
Je n'arrive pas à faire fonctionner le wifi sur mon portable hp 6715s (ancienne version, monoprocesseur, à priori non tatouée) avec une Kubuntu Jaunty.
J'ai essayé d'appliquer la procédure décrite ici : http://gefiiri.googlepages.com/kubuntuinstallhp6715s. Tout a eu l'air de bien se passer jusqu'à l'installation du driver, semble-t-il trop ancien pour ma jaunty. Depuis, j'avoue que je suis paumé complet.
La carte ethernet fonctionne nickel.
Voici les résultats des lignes de commandes...
Merci de vos lumières !
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.04
DISTRIB_CODENAME=jaunty
DISTRIB_DESCRIPTION="Ubuntu 9.04"
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] AddressMap
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
sudo lshw -C network
[sudo] password for alain:
*-network
description: Ethernet interface
product: NetLink BCM5906M Fast Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:10:00.0
logical name: eth0
version: 02
serial: 00:1a:4b:8a:06:25
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.94 duplex=full ip=192.168.0.157 latency=0 link=yes module=tg3 multicast=yes port=twisted pair speed=100MB/s
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: 2e:fc:f4:96:dc:b5
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
lsmod
Module Size Used by
radeon 342816 2
drm 96424 3 radeon
ppdev 15620 0
bridge 56212 0
stp 10500 1 bridge
bnep 20224 2
ndiswrapper 193436 0
lp 17156 0
parport 42220 2 ppdev,lp
joydev 18368 0
pcmcia 44748 0
snd_hda_intel 434228 2
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 83076 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
yenta_socket 32396 1
rsrc_nonstatic 19328 1 yenta_socket
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
pcmcia_core 43540 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 10496 0
psmouse 61972 0
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
k8temp 12416 0
snd 62756 13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15200 1 snd
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
shpchp 40212 0
ati_agp 14988 0
serio_raw 13444 0
i2c_piix4 18448 0
agpgart 42696 2 drm,ati_agp
tg3 131204 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:1a:4b:8a:06:25
inet adr:192.168.0.157 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21a:4bff:fe8a:625/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:1156 erreurs:0 :0 overruns:0 frame:0
TX packets:1021 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:1431727 (1.4 MB) Octets transmis:108627 (108.6 KB)
Interruption:10
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:54 erreurs:0 :0 overruns:0 frame:0
TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:3340 (3.3 KB) Octets transmis:3340 (3.3 KB)
sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
uname -r -m
2.6.28-14-generic i686
cat /etc/network/interfaces
auto lo
iface lo inet loopback
nm-tool
NetworkManager Tool
State: connected
** (process:3262): WARNING **: <WARN> get_one_connection(): error: invalid connection: 'NMSettingWireless' / 'ssid' invalid: 1
- Device: eth0 [Auto eth0] ----------------------------------------------------
Type: Wired
Driver: tg3
State: connected
Default: yes
HW Address: 00:1A:4B:8A:06:25
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.0.157
Prefix: 24 (255.255.255.0)
Gateway: 192.168.0.254
DNS: 212.27.40.241
DNS: 212.27.40.240Dernière modification par araok (Le 06/08/2009, à 01:29)
Config : Kubuntu Karmic Koala
Hors ligne
Pages : 1