Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 18/08/2009, à 12:02

sylvain50

reseaux wifi invisible

bonjour,

J'ai installé la dernière version d'ubuntu et impossible de voir les réseaux wifi disponibles;
pouvez vous m'aider ?

syvain@syvain-laptop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.04
DISTRIB_CODENAME=jaunty
DISTRIB_DESCRIPTION="Ubuntu 9.04"
syvain@syvain-laptop:~$ lsusb
Bus 001 Device 003: ID 148f:9021 Ralink Technology, Corp. RT2501USB Wireless Adapter
Bus 001 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
syvain@syvain-laptop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:08.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
00:08.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e)
00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 20)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01)
syvain@syvain-laptop:~$ sudo lshw -C network
[sudo] password for syvain: 
  *-network               
       description: Ethernet interface
       product: VT6102 [Rhine-II]
       vendor: VIA Technologies, Inc.
       physical id: 12
       bus info: pci@0000:00:12.0
       logical name: eth0
       version: 51
       serial: 00:40:d0:2a:3f:46
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.4.3 duplex=full ip=192.168.0.107 latency=128 link=yes maxlatency=8 mingnt=3 module=via_rhine multicast=yes port=MII speed=100MB/s
  *-network DISABLED
       description: Ethernet interface
       physical id: 2
       logical name: pan0
       serial: aa:79:8e:25:01:cd
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
syvain@syvain-laptop:~$ lsmod
Module                  Size  Used by
binfmt_misc            16776  1 
savage                 39168  2 
drm                    96424  3 savage
bridge                 56212  0 
stp                    10500  1 bridge
bnep                   20224  2 
input_polldev          11912  0 
lp                     17156  0 
joydev                 18368  0 
snd_via82xx            32152  3 
gameport               19340  1 snd_via82xx
snd_via82xx_modem      19336  5 
snd_ac97_codec        112292  2 snd_via82xx,snd_via82xx_modem
ac97_bus                9856  1 snd_ac97_codec
snd_pcm_oss            46336  0 
snd_mixer_oss          22656  1 snd_pcm_oss
snd_pcm                83076  6 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
snd_mpu401_uart        15104  1 snd_via82xx
snd_seq_dummy          10756  0 
snd_seq_oss            37760  0 
snd_seq_midi           14336  0 
snd_rawmidi            29696  2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event     15104  2 snd_seq_oss,snd_seq_midi
snd_seq                56880  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
vt8231                 23180  0 
snd_timer              29704  2 snd_pcm,snd_seq
snd_seq_device         14988  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
via_ircc               32660  0 
ppdev                  15620  0 
pcmcia                 44748  0 
psmouse                61972  0 
snd                    62756  26 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc             40100  1 
pcspkr                 10496  0 
serio_raw              13444  0 
snd_page_alloc         16904  3 snd_via82xx,snd_via82xx_modem,snd_pcm
soundcore              15200  1 snd
i2c_viapro             15892  0 
yenta_socket           32396  2 
rsrc_nonstatic         19328  1 yenta_socket
pcmcia_core            43540  3 pcmcia,yenta_socket,rsrc_nonstatic
irda                  197308  1 via_ircc
shpchp                 40212  0 
parport                42220  3 lp,ppdev,parport_pc
via_agp                16256  1 
video                  25360  0 
crc_ccitt              10112  1 irda
agpgart                42696  2 drm,via_agp
output                 11008  1 video
via_rhine              30856  0 
mii                    13312  1 via_rhine
usbhid                 42336  0 
floppy                 64324  0 
fbcon                  46112  0 
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
syvain@syvain-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

syvain@syvain-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

syvain@syvain-laptop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:40:d0:2a:3f:46  
          inet adr:192.168.0.107  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::240:d0ff:fe2a:3f46/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:2982 erreurs:0 :0 overruns:0 frame:0
          TX packets:2836 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets reçus:2347145 (2.3 MB) Octets transmis:433982 (433.9 KB)
          Interruption:11 Adresse de base:0x8000 

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:8 erreurs:0 :0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets reçus:480 (480.0 B) Octets transmis:480 (480.0 B)

syvain@syvain-laptop:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

pan0      Interface doesn't support scanning.

syvain@syvain-laptop:~$ uname -r -m 
2.6.28-14-generic i686
syvain@syvain-laptop:~$ cat  /etc/network/interfaces
auto lo
iface lo inet loopback

syvain@syvain-laptop:~$ nm-tool

NetworkManager Tool

State: connected

- Device: eth0  [Auto eth0] ----------------------------------------------------
  Type:              Wired
  Driver:            via-rhine
  State:             connected
  Default:           yes
  HW Address:        00:40:D0:2A:3F:46

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.0.107
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.0.1

    DNS:             192.168.0.2


syvain@syvain-laptop:~$

Merci d'avance

bonne journée

Hors ligne

#2 Le 18/08/2009, à 13:59

doc212

Re : reseaux wifi invisible

Salut,

ton interface wifi (la Ralink RT2501USB) n'est meme pas listée dans le lshw -C network.

Je suppose que c'est le module des pilotes qui n'est pas chargé ...
Que donne

lsmod | grep rt
lsusb -v

J'arrive pas à trouver le module exact qu'il faut utiliser pour ta carte. Tu peux essayer sudo modprobe rt (puis tu tapes 2 fois sur tab pour qu'il t'affiche une liste)
rt73usb
rt2500usb
rt2x00usb

Je suppose que c'est l'un de ces trois là ... Juste après avoir chargé un module, tu peux essayer de regarder les derniers messages du noyau pour voir si il dit qqch d'interessant avec dmesg| tail

Pour enlever un module c'est sudo modprobe -r nom_du_module

Quand tu aura chargé le bon module, ton interface réseau devrait apparaître dans nm-tool ou lshw -C network

Dernière modification par doc212 (Le 18/08/2009, à 14:03)

Hors ligne

#3 Le 18/08/2009, à 15:27

sylvain50

Re : reseaux wifi invisible

Merci pour ta réponse.

voilà ce que ça donne :

syvain@syvain-laptop:~$ lsmod | grep rt
gameport               19340  1 snd_via82xx
snd_mpu401_uart        15104  1 snd_via82xx
snd_rawmidi            29696  2 snd_mpu401_uart,snd_seq_midi
parport_pc             40100  1 
snd                    62756  26 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport                42220  3 lp,ppdev,parport_pc
agpgart                42696  2 drm,via_agp
syvain@syvain-laptop:~$ lsusb -v

Bus 001 Device 003: ID 148f:9021 Ralink Technology, Corp. RT2501USB Wireless Adapter
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x148f Ralink Technology, Corp.
  idProduct          0x9021 RT2501USB Wireless Adapter
  bcdDevice            0.01
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           53
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              300mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           5
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc00e M-BJ58/M-BJ69 Optical Wheel Mouse
  bcdDevice           11.10
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              10
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
can't get hub descriptor: Operation not permitted
syvain@syvain-laptop:~$ sudo modprobe rt
[sudo] password for syvain: 
FATAL: Module rt not found.
syvain@syvain-laptop:~$ sudo modprobe rt 
.adobe/                    .gvfs/
.bash_history              .ICEauthority
.bash_logout               .icons/
.bashrc                    Images/
Bureau/                    .local/
.cache/                    .macromedia/
.checkbox/                 Modèles/
.config/                   .mozilla/
.dbus/                     Musique/
.dmrc                      .nautilus/
Documents/                 .profile
.esd_auth                  Public/
.evolution/                .pulse/
examples.desktop           .pulse-cookie
.face                      .recently-used.xbel
.fontconfig/               .sudo_as_admin_successful
.gconf/                    .themes/
.gconfd/                   .thumbnails/
.gksu.lock                 .update-manager-core/
.gnome2/                   .update-notifier/
.gnome2_private/           Vidéos/
.gnupg/                    .wapi/
.gstreamer-0.10/           .Xauthority
.gtk-bookmarks             .xsession-errors

Je comprends pas grand chose, si vous y voyez une solution je suis preneur merci !

Dernière modification par sylvain50 (Le 18/08/2009, à 15:28)

Hors ligne

#4 Le 18/08/2009, à 18:41

doc212

Re : reseaux wifi invisible

Mouais ok ...

Alors le lsusb -v c'était pour voir les périphériques usb et avoir plus de détails. Mais j'ai pas compris grand chose de ce qui a été donné et j'ai rien trouvé de plus intéressant ... :-)

lsmod | grep rt  c'était pour afficher la liste des modules chargés et ne garder que les lignes où il y a le motif rt dedans. Et effectivement, on voit que aucun des modules rt73usb, rt2500usb ou rt2x00usb ne sont chargés ... (faut regarder que la première colonne)

Donc on va essayer de les charger nous même. Dans une console, tape les commandes suivantes:

sudo modprobe rt73usb
dmesg| tail -n 20
lsmod | grep rt73
iwconfig

Je t'explique un peu ce que ça fait:
sudo modprobe rt73usb c'est pour charger le module donné, en l'occurrence rt73usb
dmesg | tail -n 20 c'est pour afficher les 20 derniers messages du noyau, pour voir si il se plaint du module qu'on a chargé ou quoi ...
lsmod | grep rt73 c'est pour réafficher la liste des modules chargés pour voir si un module qui contient le motif "rt73" a été chargé
iwconfig, c'est pour voir si maintenant, ton dongle wifi est détecté

normalement, si une interface appelée wlan0 (ou qqch dans le genre) est apparue, c'est que ça devrait être bon.

Si c'est pas bon, on enlèvera le module rt73usb et on refera la même chose avec le module rt2500usb (et puis on essaiera avec le module rt2x00usb si nécessaire...)

bon courage wink

Dernière modification par doc212 (Le 18/08/2009, à 18:43)

Hors ligne

#5 Le 19/08/2009, à 08:49

sylvain50

Re : reseaux wifi invisible

Bonjour et merci pour ces précisions très claires!

Voici les résultats

syvain@syvain-laptop:~$ sudo modprobe rt73usb
[sudo] password for syvain: 
syvain@syvain-laptop:~$ dmesg| tail -n 20
[   35.359996] [drm] Initialized drm 1.1.0 20060810
[   35.378013] pci 0000:01:00.0: power state changed by ACPI to D0
[   35.378046] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   35.378336] [drm] Initialized savage 2.4.1 20050313 on minor 0
[   35.500193] mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
[   35.501209] mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
[   37.885348] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   48.240061] eth0: no IPv6 routers present
[   77.978535] UDF-fs: Partition marked readonly; forcing readonly mount
[   78.112034] UDF-fs INFO UDF: Mounting volume 'New', timestamp 2009/07/06 17:34 (1000)
[   97.200064] Clocksource tsc unstable (delta = -246981509 ns)
[  313.754135] cfg80211: Calling CRDA to update world regulatory domain
[  313.940132] cfg80211: World regulatory domain updated:
[  313.940147] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  313.940155] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  313.940162] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  313.940168] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  313.940174] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  313.940180] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  314.288615] usbcore: registered new interface driver rt73usb
syvain@syvain-laptop:~$ lsmod | grep rt73
rt73usb                33412  0 
rt2x00usb              18688  1 rt73usb
rt2x00lib              37888  2 rt73usb,rt2x00usb
crc_itu_t              10112  2 rt73usb,udf
syvain@syvain-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

Apparemment le module rt73usb est bien chargé mais le dongle wifi n'est pas detecté.
il faut que j'essaye avec les autres modules donc

je retire le module

syvain@syvain-laptop:~$ sudo modprobe -r rt73usb

je charge l'autre module

syvain@syvain-laptop:~$ sudo modprobe rt2500usb
syvain@syvain-laptop:~$ dmesg| tail -n 20
[   97.200064] Clocksource tsc unstable (delta = -246981509 ns)
[  313.754135] cfg80211: Calling CRDA to update world regulatory domain
[  313.940132] cfg80211: World regulatory domain updated:
[  313.940147] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  313.940155] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  313.940162] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  313.940168] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  313.940174] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  313.940180] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  314.288615] usbcore: registered new interface driver rt73usb
[  635.339772] usbcore: deregistering interface driver rt73usb
[  731.837847] cfg80211: Calling CRDA to update world regulatory domain
[  731.927600] cfg80211: World regulatory domain updated:
[  731.927616] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  731.927621] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  731.927625] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  731.927629] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  731.927633] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  731.927637] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  731.966955] usbcore: registered new interface driver rt2500usb

syvain@syvain-laptop:~$ lsmod | grep rt2500usb
rt2500usb              27904  0 
rt2x00usb              18688  1 rt2500usb
rt2x00lib              37888  2 rt2500usb,rt2x00usb

Aucun résultat hmm

syvain@syvain-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

Dernière tentative avec rt2x00usb

syvain@syvain-laptop:~$ sudo modprobe -r rt2500usb

syvain@syvain-laptop:~$ lsmod | grep rt2x00usb
rt2x00usb              18688  1 rt2500usb
rt2x00lib              37888  2 rt2500usb,rt2x00usb
mac80211              217592  2 rt2x00usb,rt2x00lib
syvain@syvain-laptop:~$ sudo modprobe rt2x00usb
syvain@syvain-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

syvain@syvain-laptop:~$

Hors ligne

#6 Le 19/08/2009, à 15:59

doc212

Re : reseaux wifi invisible

Mmmh bon ...

J'ai recherché un peu sur le forum avec le terme rt2501usb

J'suis tombé sur :
http://forum.ubuntu-fr.org/viewtopic.php?id=269596

Le mec, il utilise le meme dongle que toi (voir lsusb) et si tu regarde ce que renvoie nm-tools, on voit qu'il utilise le module rt73usb. Par contre je sais pas si la solution qu'on lui propose est adaptée à ton cas ...

Quoi qu'il en soit, j'pense que tu devrais utiliser le module rt73usb. Et essaie ptet de retirer puis de rebrancher le dongle après avoir chargé le module ... hmm C'est un peu une solution de normand mais on sait jamais (j'ai rien contre les normands hein ...:))

Mais j'ai bizarrement l'impression que le problème est pas là ... en faisant lshw -C network, j'crois que normalement, meme sans avoir chargé le module, ton interface wifi devrait apparaitre ... mais elle devrait être signalée unclaimed ou qqch comme ça pour dire qu'aucun pilote ne la gère ... tu peux faire le test pour ton interface eth0 en retirant le module via-rhine si tu veux (et puis tu le recharge après bien sûr ... smile)

v encore essayer de cherche un peu mais dans le doute, essaie qd meme le truc de débrancher et rebrancher le dongle après avoir chargé rt73usb

sinon tu peux ptet essayer d'installer le pilote du site officiel de ralink:
http://www.ralinktech.com/ralink/Home/S … Linux.html

Dernière modification par doc212 (Le 19/08/2009, à 16:10)

Hors ligne