Pages : 1
#1 Le 26/11/2009, à 03:37
- superBOB
Pb démarrage suite MAJ noyau 2.6.31-15
Bonjour
Je viens de faire l'installation de la maj du noyau. Au démarrage, juste avant le splash, je reste bloqué sur deux écrans qui alternent entre eux.
Le premier
Stopping NTP server ntpdCa dit aussi "starting NTP server" mais ça passe très vite.
Le deuxième
nicholas-laptop login:Là j'essaye de taper mon login mais ça repasse instantanément sur le premier écran, et ainsi de suite.
Du coup là j'utilise le précédent noyau...
https://bugs.launchpad.net/ubuntu/+source/ntp/+bug/481292
Dernière modification par superBOB (Le 26/11/2009, à 04:54)
Hors ligne
#2 Le 26/11/2009, à 14:06
- superBOB
Re : Pb démarrage suite MAJ noyau 2.6.31-15
J'ai lu sur le forum UK que supprimer le paquet ntp réglait le problème. Je l'ai fait. Quand je démarre en Recovery Mode, le serveur ntp ne se lance plus, donc au moins je ne me retrouve plus dans le cercle sans fin d'avant. Je rentre mon login et mon mot de passe. Je fais
startxet X ne se lance pas...
Voici mon log, c'est du chinois pour moi...
Précision, j'ai créé un xorg.conf pour régler la résolution de l'écran.
Mais tout fonctionne correctement avec le noyau 14 donc je ne vois pas d'où ça peut venir.
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux nicholas-laptop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=aa55e798-e65d-4ae6-981b-65318327fe6d ro quiet splash
Build Date: 26 October 2009 05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 26 12:56:15 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "GMA500"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:8108:1025:0244 Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller rev 7, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "psb"
(II) Loading /usr/lib/xorg/modules/drivers//psb_drv.so
(II) Module psb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.29.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) Debug: psbSetup
(II) PSB: driver for Intel GMA500 chipsets: Intel GMA500
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for psb
(II) Debug: psbProbe
(--) Assigning device section with no busID to primary device
(--) Chipset Intel GMA500 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) PSB(0): Debug: Allocating new device
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) PSB(0): Debug: psbPreInit
(II) PSB(0): psb_drv - 5.0.0.0045
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) PSB(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) PSB(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) PSB(0): Linear framebuffer at 0x0
(==) PSB(0): RGB weight 888
(==) PSB(0): Default visual is TrueColor
(**) PSB(0): Option "IgnoreACPI" "yes"
(==) PSB(0): Use hardware cursor.
(**) PSB(0): Not using ACPI for LVDS detection.
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) PSB(0): Debug: psbPreinitXpsb
(II) Loading sub module "Xpsb"
(II) LoadModule: "Xpsb"
(II) Loading /usr/lib/xorg/modules/drivers//Xpsb.so
(II) Module Xpsb: vendor="Tungsten Graphics Inc."
compiled for 1.6.0, module version = 0.1.0
(II) PSB(0): Debug: psbDeviceScreenInit
(II) PSB(0): Debug: Initializing device
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) PSB(0): Debug: MMIO virtual address is 0xb778e000
(--) PSB(0): Mapped PCI MMIO at physical address 0xb0080000
with size 512 kiB
(EE) PSB(0): the stolenBase is:0x3f800000
(--) PSB(0): Detected 7932 kiB of "stolen" memory set aside as video RAM.
(EE) PSB(0): screnIndex is:0;fbPhys is:0x3f800000; fbsize is:0x007bf000
(--) PSB(0): Mapped graphics aperture at physical address 0x3f800000
with size 7 MiB
(II) PSB(0): Debug: DRM device init
(II) PSB(0): Poulsbo MemClock 533, CoreClock 200
(II) PSB(0): Poulsbo Latencies 324 744 210 450
(II) PSB(0): sku_value is 0x00800000, sku_bSDVOEnable is 1, sku_bMaxResEnableInt is 0
(II) PSB(0): Debug: psbInitOutputs
(II) PSB(0): Debug: psbLVDSInit
(II) PSB(0): Output LVDS0 has no monitor section
(II) Debug: i830_psbOutputInit
(II) PSB(0): I2C bus "LVDSBLC_B" initialized.
(II) PSB(0): I2C bus "LVDSDDC_C" initialized.
(II) PSB(0): I2C device "LVDSBLC_B:BLC Control" registered at address 0x58.
(II) PSB(0): Debug: i830_psbDDCGetModes
(II) PSB(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) PSB(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) PSB(0): EDID vendor "AUO", prod id 8284
(II) PSB(0): Printing DDC gathered Modelines:
(II) PSB(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
(II) PSB(0): EDID vendor "AUO", prod id 8284
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) PSB(0): initializing int10
(II) PSB(0): Bad V_BIOS checksum
(II) PSB(0): Primary V_BIOS segment is: 0xc000
(II) PSB(0): VESA BIOS detected
(II) PSB(0): VESA VBE Version 3.0
(II) PSB(0): VESA VBE Total Mem: 7872 kB
(II) PSB(0): VESA VBE OEM: Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS
(II) PSB(0): VESA VBE OEM Software Rev: 1.0
(II) PSB(0): VESA VBE OEM Vendor: Intel Corporation
(II) PSB(0): VESA VBE OEM Product: Intel(r)Poulsbo Graphics Controller
(II) PSB(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) PSB(0): Found panel mode in BIOS VBT tables:
(II) PSB(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 (48.2 kHz)
(II) PSB(0): BLC Data in BIOS VBT tables: datasize=0 paneltype=15 type=0x02 pol=0x00 freq=0x03e8 minlevel=0x00 i2caddr=0x58 cmd=0xaa
(WW) PSB(0): BIOS panel mode data doesn't match probed data, continuing with probed.
(II) PSB(0): BIOS mode:
(II) PSB(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 (48.2 kHz)
(II) PSB(0): probed mode:
(II) PSB(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
(II) PSB(0): Lid state timer is enabled!
(II) Debug: i830_psbPtrAddToList
(II) PSB(0): Debug: i830_psbSDVOInit
(II) PSB(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) PSB(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) PSB(0): I2C bus "SDVOB DDC Bus" initialized.
(II) PSB(0): Debug: SDVO: W: 02 (i830_SDVO_CMD_GET_DEVICE_CAPS)
(II) PSB(0): SDVO: R: 02 42 02 01 01 3D 3E 00 (Success)
(II) PSB(0): Debug: sdvo_get_capabilities, caps.output_flags=3e
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Target not specified)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Output SDVO-1 has no monitor section
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 10 00 (i830_SDVO_CMD_SET_TARGET_INPUT)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 1D (i830_SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
(II) PSB(0): SDVO: R: C4 09 74 40 (Success)
(II) PSB(0): SDVO device VID/DID: 02:42.02, clock range 25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
(II) Debug: i830_psbPtrAddToList
(II) Debug: i830_psbOutputCompat
(II) PSB(0): Debug: i830_psbOutputTypesToIndex
(II) PSB(0): Debug: Output crtc mask is 0x00000002, compat mask is 0x00000001
(II) PSB(0): Debug: i830_psbOutputTypesToIndex
(II) PSB(0): Debug: Output crtc mask is 0x00000001, compat mask is 0x00000002
(II) PSB(0): Debug: xxi830_psbInitCrtcs
(II) PSB(0): Debug: xxi830_psbCrtcInit
(II) PSB(0): Debug: xxi830_psbCrtcInit
(II) Debug: i830_psbOutputEnableCrtcForAllScreens
(II) Debug: Marking crtc 0 as available for all screens.
(II) Debug: i830_psbOutputEnableCrtcForAllScreens
(II) Debug: Marking crtc 1 as available for all screens.
(II) PSB(0): Debug: psbDeviceFinishInit
(II) Debug: Really running psbDeviceFinishInit
(++) PSB(0): i830_psbSaveHWState
(II) PSB(0): Debug: xxi830_psbOutputSave
(II) PSB(0): Debug: psbLVDSSave
(II) PSB(0): Debug: xxi830_sdvo_save
(II) PSB(0): Debug: SDVO: W: 20 (i830_SDVO_CMD_GET_CLOCK_RATE_MULT)
(II) PSB(0): SDVO: R: 01 (Success)
(II) PSB(0): Current clock rate multiplier: 1
(II) PSB(0): Debug: SDVO: W: 04 (i830_SDVO_CMD_GET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: --save_active_outputs is 0
(II) PSB(0): Debug: SDVO: W: 10 00 (i830_SDVO_CMD_SET_TARGET_INPUT)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 12 (i830_SDVO_CMD_GET_INPUT_TIMINGS_PART1)
(II) PSB(0): SDVO: R: 00 00 00 00 00 00 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 13 (i830_SDVO_CMD_GET_INPUT_TIMINGS_PART2)
(II) PSB(0): SDVO: R: 00 00 00 00 16 20 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 11 00 00 (i830_SDVO_CMD_SET_TARGET_OUTPUT)
(II) PSB(0): SDVO: R: (Invalid arg)
(II) PSB(0): Debug: SDVO: W: 18 (i830_SDVO_CMD_GET_OUTPUT_TIMINGS_PART1)
(II) PSB(0): SDVO: R: 00 00 00 00 00 00 00 00 (Target not specified)
(II) PSB(0): Debug: SDVO: W: 06 00 01 00 00 (i830_SDVO_CMD_GET_IN_OUT_MAP)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: xxi830_psbCrtcSave pipe 0.
(II) PSB(0): Debug: xxi830_psbCrtcSave pipe 1.
(==) PSB(0): Shadow framebuffer disabled
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(==) PSB(0): Acceleration enabled
(==) PSB(0): [EXA] Allocate 32768 kiB for EXA pixmap cache.
(==) PSB(0): [EXA] Allocate 4 kiB for scratch memory.
(II) Debug: i830_psbOutputAssignToScreen
(II) PSB(0): Output "SDVO-1" is assigned to this screen.
(II) Debug: i830_psbOutputAssignToScreen
(II) PSB(0): Output "LVDS0" is assigned to this screen.
(II) PSB(0): Searching for matching Poulsbo mode(s):
(II) PSB(0): Debug: psbLVDSDetect 1
(II) PSB(0): Debug: psbGetLidStatus lidState= 0
(II) PSB(0): Debug: psbLVDSGetModes
(II) PSB(0): EDID for output LVDS0
(II) PSB(0): Manufacturer: AUO Model: 205c Serial#: 0
(II) PSB(0): Year: 2008 Week: 1
(II) PSB(0): EDID Version: 1.3
(II) PSB(0): Digital Display Input
(II) PSB(0): Max Image Size [cm]: horiz.: 26 vert.: 14
(II) PSB(0): Gamma: 2.20
(II) PSB(0): No DPMS capabilities specified
(II) PSB(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) PSB(0): First detailed timing is preferred mode
(II) PSB(0): redX: 0.584 redY: 0.333 greenX: 0.338 greenY: 0.571
(II) PSB(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
(II) PSB(0): Manufacturer's mask: 0
(II) PSB(0): Supported detailed timing:
(II) PSB(0): clock: 72.0 MHz Image Size: 256 x 144 mm
(II) PSB(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1494 h_border: 0
(II) PSB(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
(WW) PSB(0): Unknown vendor-specific block f
(II) PSB(0): AUO
(II) PSB(0): B116XW02 V0
(II) PSB(0): EDID (in hex):
(II) PSB(0): 00ffffffffffff0006af5c2000000000
(II) PSB(0): 01120103801a0e780a99859555569228
(II) PSB(0): 22505400000001010101010101010101
(II) PSB(0): 010101010101201c5680500023303020
(II) PSB(0): 36000090100000180000000f00000000
(II) PSB(0): 00000000000000000020000000fe0041
(II) PSB(0): 554f0a202020202020202020000000fe
(II) PSB(0): 004231313658573032205630200a00be
(II) PSB(0): EDID vendor "AUO", prod id 8284
(II) PSB(0): Printing DDC gathered Modelines:
(II) PSB(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
(II) PSB(0): EDID vendor "AUO", prod id 8284
(II) PSB(0): Debug: psbLVDSModeValid
(II) PSB(0): Printing probed modes for output LVDS0
(II) PSB(0): Modeline "1366x768"x60.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
(II) PSB(0): Debug: xxi830_sdvo_detect 1
(II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
(II) PSB(0): SDVO: R: 00 00 (Not supported)
(II) PSB(0): Debug: SDVO: W: 0D 01 00 (i830_SDVO_CMD_SET_ACTIVE_HOT_PLUG)
(II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
(II) PSB(0): Debug: xxi830_sdvo_dpms 0, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 03 (i830_SDVO_CMD_GET_TRAINED_INPUTS)
(II) PSB(0): SDVO: R: 00 (Success)
(EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 02 (i830_SDVO_CMD_GET_DEVICE_CAPS)
(II) PSB(0): SDVO: R: 02 42 02 01 01 3D 3E 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: xxi830_sdvo_dpms 3, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): EDID for output SDVO-1
(II) PSB(0): Output LVDS0 connected
(II) PSB(0): Output SDVO-1 disconnected
(II) PSB(0): Using exact sizes for initial modes
(II) PSB(0): Output LVDS0 using initial mode 1366x768
(II) Debug: i830_psbOutputEnableCrtcForAllScreens
(II) Debug: Marking crtc 0 as available for all screens.
(II) Debug: i830_psbOutputDisableCrtcForOtherScreens
(II) Debug: Grabbing crtc 1 for screen 0
(==) PSB(0): Using gamma correction (1.0, 1.0, 1.0)
(**) PSB(0): Display dimensions: (260, 140) mm
(**) PSB(0): DPI set to (133, 247)
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) PSB(0): Debug: psbScreenInit
(II) PSB(0): Debug: psbDRIScreenInit
(II) PSB(0): Debug: SAREA size is 8192
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:0:2:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "psb" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) PSB(0): [drm] Using the DRM lock SAREA also for drawables.
(II) PSB(0): [drm] framebuffer handle = 0x3f800000
(II) PSB(0): [drm] added 1 reserved context for kernel
(II) PSB(0): X context handle = 0x1
(II) PSB(0): [drm] installed DRM signal handler
(II) PSB(0): [drm] Allocated device DRM context 2.
(II) [drm] Irq handler installed for IRQ 16.
(II) PSB(0): Debug: PsbDRIUpdateScanouts
(II) PSB(0): Debug: Shadow
(II) PSB(0): Debug: Calling fbScreenInit.
(II) PSB(0): Debug: Fix up visuals.
(II) PSB(0): Debug: fbPictureInitInit
(**) PSB(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 33554432 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) PSB(0): Debug: Backing store
(==) PSB(0): Backing store disabled
(==) PSB(0): Silken mouse enabled
(II) PSB(0): DPMS enabled
(WW) PSB(0): Option "AccelMethod" is not used
(WW) PSB(0): Option "DRI" is not used
(II) PSB(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) PSB(0): Debug: psbLVDSCreateResources
(II) PSB(0): Debug: psbLVDSSetProperty
(II) PSB(0): Debug: psbLVDSSetProperty panelfitting 0
(II) PSB(0): Debug: psbLVDSSetProperty
(II) PSB(0): Debug: BLCType=2 Backlightg level = 100
(II) PSB(0): Debug: psbLVDSSetProperty BLC level 100(II) PSB(0): Debug: SDVO: W: 27 (i830_SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
(II) PSB(0): SDVO: R: FF FF FF FF FF 1F (Success)
(II) PSB(0): Debug: SDVO: W: 84 (II) PSB(0): SDVO: R: FA DF (Success)
(II) PSB(0): Debug: SDVO: W: 61 (II) PSB(0): SDVO: R: 00 00 00 00 (Target not specified)
(II) PSB(0): Debug: SDVO: W: 67 (II) PSB(0): SDVO: R: 00 00 00 00 (Target not specified)
(II) PSB(0): Debug: TVStandard is 1, TVStdBitmask is 1
(II) PSB(0): Debug: i830_sdvo_set_tvoutputs_formats, format is NTSC_M
(II) PSB(0): Debug: SDVO: W: 5A 00 00 (II) PSB(0): SDVO: R: (Target not specified)
(II) PSB(0): Debug: i830_sdvo_set_hue, hue is 0
(II) PSB(0): Debug: SDVO: W: 5D 00 00 (II) PSB(0): SDVO: R: (Target not specified)
(II) PSB(0): Debug: i830_sdvo_set_brightness, brightness is 0
(II) PSB(0): Debug: SDVO: W: 60 00 00 (II) PSB(0): SDVO: R: (Target not specified)
(II) PSB(0): Debug: i830_sdvo_set_contrast, contrast is 0
(II) PSB(0): Debug: SDVO: W: 63 00 00 (II) PSB(0): SDVO: R: (Target not specified)
(II) PSB(0): Debug: i830_sdvo_set_horzontal_overscan, x overscan is 0
(II) PSB(0): Debug: i830_sdvo_set_vertical_overscan, y overscan is 0, status is 0
(II) PSB(0): [DRI] installation complete
(II) PSB(0): Debug: PsbDRIUpdateScanouts
(II) PSB(0): Debug: Buffer 0 rotation 0 handle 0x6573ba04
Xpsb - 5.0.1.0046
(II) PSB(0): [Xpsb] Disable hog plug daemon in PSB driver.
(II) PSB(0): [Xpsb] Started kernel request thread.
(II) PSB(0): Xpsb extension for 3D engine acceleration enabled.
(II) PSB(0): Set up textured video
(II) PSB(0): Xv video acceleration enabled.
(II) PSB(0): Initializing HW Cursor.
(II) PSB(0): Debug: psbEnterVT 1
(EE) PSB(0): has_fbdev is true
(++) PSB(0): i830_psbSaveHWState
(II) PSB(0): Debug: xxi830_psbOutputSave
(II) PSB(0): Debug: psbLVDSSave
(II) PSB(0): Debug: xxi830_sdvo_save
(II) PSB(0): Debug: SDVO: W: 20 (i830_SDVO_CMD_GET_CLOCK_RATE_MULT)
(II) PSB(0): SDVO: R: 01 (Success)
(II) PSB(0): Current clock rate multiplier: 1
(II) PSB(0): Debug: SDVO: W: 04 (i830_SDVO_CMD_GET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: --save_active_outputs is 0
(II) PSB(0): Debug: SDVO: W: 10 00 (i830_SDVO_CMD_SET_TARGET_INPUT)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 12 (i830_SDVO_CMD_GET_INPUT_TIMINGS_PART1)
(II) PSB(0): SDVO: R: 00 00 00 00 00 00 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 13 (i830_SDVO_CMD_GET_INPUT_TIMINGS_PART2)
(II) PSB(0): SDVO: R: 00 00 00 00 16 20 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 11 00 00 (i830_SDVO_CMD_SET_TARGET_OUTPUT)
(II) PSB(0): SDVO: R: (Invalid arg)
(II) PSB(0): Debug: SDVO: W: 18 (i830_SDVO_CMD_GET_OUTPUT_TIMINGS_PART1)
(II) PSB(0): SDVO: R: 00 00 00 00 00 00 00 00 (Target not specified)
(II) PSB(0): Debug: SDVO: W: 06 00 F8 9F 34 (i830_SDVO_CMD_GET_IN_OUT_MAP)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: xxi830_psbCrtcSave pipe 0.
(II) PSB(0): Debug: xxi830_psbCrtcSave pipe 1.
(II) PSB(0): Debug: psbSetVGAOff
(II) PSB(0): Debug: i830_psbCrtcSetupCursors
(II) PSB(0): Debug: i830_psbCrtcHWCursorAlloc
(II) PSB(0): Debug: Cursor 0 ARGB addresses 0x3f800000, 0x00000000
(II) PSB(0): Debug: i830_psbCrtcHWCursorAlloc
(II) PSB(0): Debug: Cursor 1 ARGB addresses 0x3f805000, 0x00000000
(II) PSB(0): Debug: psbLVDSDPMS
(II) Debug: PanelPower Status = 0xc0000008
(II) Debug: Pipe B PLL 0xd8020000
(II) Debug: Pipe B Enabled 0x80000000
(II) PSB(0): Debug: BLCType=2 Backlightg level = 0
(II) PSB(0): Debug: xxi830_sdvo_dpms 3, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: xxi830_psbCrtcDpms pipe 0
(II) PSB(0): Debug: Crtc DPMS Off
(II) PSB(0): Debug: xxi830_psbCrtcDpms pipe 1
(II) PSB(0): Debug: Crtc DPMS Off
(II) PSB(0): Debug: xxi830_psbCrtcLock
(II) PSB(0): Debug: psbLVDSModeFixup
(II) Debug: i830_psbOutputEnableCrtcForAllScreens
(II) Debug: Marking crtc 0 as available for all screens.
(II) Debug: i830_psbOutputDisableCrtcForOtherScreens
(II) Debug: Grabbing crtc 1 for screen 0
(II) PSB(0): Debug: xxi830_psbCrtcModeFixup, NULL
(II) PSB(0): Debug: i830_psbOutputPrepare, output->dpms,off
(II) PSB(0): Debug: psbLVDSDPMS
(II) Debug: PanelPower Status = 0x08000001
(II) Debug: Pipe B PLL 0x58020000
(II) Debug: Pipe B Enabled 0x00000000
(II) PSB(0): Debug: BLCType=2 Backlightg level = 0
(II) PSB(0): Debug: xxi830_psbCrtcPrepare
(II) PSB(0): Debug: xxi830_psbCrtcDpms pipe 1
(II) PSB(0): Debug: Crtc DPMS Off
(II) PSB(0): Debug: xxi830_psbCrtcModeSet
(II) PSB(0): Debug: i830_psbCrtcModeSet
(II) PSB(0): Debug: chosen: dotclock 72000 vco 2016000 ((m 105, m1 17, m2 8), n 3, (p 28, p1 2, p2 14))
(II) PSB(0): Debug: clock regs: 0xd8027200, 0x00031108
(II) PSB(0): Debug: psbPipeSetBase
(II) PSB(0): Debug: psbLVDSModeSet
(II) PSB(0): Debug: xxi830_psbCrtcCommit, crtc->dpms
(II) PSB(0): Debug: xxi830_psbCrtcDpms pipe 1
(II) PSB(0): Debug: Crtc DPMS On / Sb /SS
(II) PSB(0): Debug: xxi830_psbCrtcLoadLut 0x930a790
(II) PSB(0): Debug: i830_psbOutputCommi, output->dpms, ont
(II) PSB(0): Debug: psbLVDSDPMS
(II) Debug: PanelPower Status = 0x48000001
(II) Debug: Pipe B PLL 0xd8027200
(II) Debug: Pipe B Enabled 0x80000000
(II) Debug: psbLVDSSetPanelPower: lidState= 0
(II) PSB(0): Debug: BLCType=2 Backlightg level = 100
(II) PSB(0): Debug: xxi830_psbCrtcUnlock
(II) PSB(0): Debug: xxi830_sdvo_dpms 3, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: xxi830_psbCrtcDpms pipe 0
(II) PSB(0): Debug: Crtc DPMS Off
(II) PSB(0): xxi830_Output configuration:
(II) PSB(0): Pipe A is off
(II) PSB(0): Display plane A is now disabled and connected to pipe A.
(II) PSB(0): Pipe B is on
(II) PSB(0): Display plane B is now enabled and connected to pipe B.
(II) PSB(0): Output LVDS0 is connected to pipe B
(II) PSB(0): Output SDVO-1 is connected to pipe none
(II) PSB(0): Debug: psbAdjustFrame
(II) PSB(0): Debug: psbPipeSetBase
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:0:2:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/psb_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) PSB(0): Setting screen physical size to 256 x 144
(II) PSB(0): Debug: psbXf86CrtcResize 1366 768
(II) PSB(0): Debug: i830_psbCrtcSaveCursors
(II) PSB(0): Debug: i830_psbCrtcHWCursorSave
(II) PSB(0): Debug: i830_psbCrtcHWCursorSave
(II) Debug: psbScanoutDestroy
(II) PSB(0): Debug: PsbDRIUpdateScanouts
(II) PSB(0): Debug: PsbDRIUpdateScanouts
(II) PSB(0): Debug: Buffer 0 rotation 0 handle 0x3c33cc04
(II) PSB(0): Debug: i830_psbCrtcSetupCursors
(II) PSB(0): Debug: i830_psbCrtcHWCursorAlloc
(II) PSB(0): Debug: Cursor 0 ARGB addresses 0x3fc08000, 0x00000000
(II) PSB(0): Debug: i830_psbCrtcHWCursorAlloc
(II) PSB(0): Debug: Cursor 1 ARGB addresses 0x3fc0d000, 0x00000000
(II) PSB(0): Debug: psbAdjustFrame
(II) PSB(0): Debug: psbPipeSetBase
(II) PSB(0): Debug: psbSaveScreen
(II) PSB(0): Debug: xxi830_psbCrtcDpms pipe 1
(II) PSB(0): Debug: Crtc DPMS On / Sb /SS
(II) PSB(0): Debug: xxi830_psbCrtcLoadLut 0x930a790
(II) PSB(0): Debug: psbLVDSDPMS
(II) Debug: PanelPower Status = 0xc0000008
(II) Debug: Pipe B PLL 0xd8027200
(II) Debug: Pipe B Enabled 0x80000000
(II) Debug: psbLVDSSetPanelPower: lidState= 0
(II) PSB(0): Debug: BLCType=2 Backlightg level = 100
(II) config/hal: Adding input device Sleep Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device WebCam
(**) WebCam: always reports core events
(**) WebCam: Device: "/dev/input/event5"
(II) WebCam: Found keys
(II) WebCam: Configuring as keyboard
(II) XINPUT: Adding extended input device "WebCam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) PSB(0): Debug: xxi830_sdvo_detect 1
(II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
(II) PSB(0): SDVO: R: 00 00 (Not supported)
(II) PSB(0): Debug: SDVO: W: 0D 01 00 (i830_SDVO_CMD_SET_ACTIVE_HOT_PLUG)
(II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
(II) PSB(0): Debug: xxi830_sdvo_dpms 0, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 03 (i830_SDVO_CMD_GET_TRAINED_INPUTS)
(II) PSB(0): SDVO: R: 00 (Success)
(EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 02 (i830_SDVO_CMD_GET_DEVICE_CAPS)
(II) PSB(0): SDVO: R: 02 42 02 01 01 3D 3E 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: xxi830_sdvo_dpms 3, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: xxi830_sdvo_get_modes
(II) PSB(0): Debug: other device, no mode get
(II) PSB(0): Debug: psbLVDSDetect 1
(II) PSB(0): Debug: psbGetLidStatus lidState= 0
(II) PSB(0): Debug: psbLVDSGetModes
(II) PSB(0): EDID for output LVDS0
(II) PSB(0): Manufacturer: AUO Model: 205c Serial#: 0
(II) PSB(0): Year: 2008 Week: 1
(II) PSB(0): EDID Version: 1.3
(II) PSB(0): Digital Display Input
(II) PSB(0): Max Image Size [cm]: horiz.: 26 vert.: 14
(II) PSB(0): Gamma: 2.20
(II) PSB(0): No DPMS capabilities specified
(II) PSB(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) PSB(0): First detailed timing is preferred mode
(II) PSB(0): redX: 0.584 redY: 0.333 greenX: 0.338 greenY: 0.571
(II) PSB(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
(II) PSB(0): Manufacturer's mask: 0
(II) PSB(0): Supported detailed timing:
(II) PSB(0): clock: 72.0 MHz Image Size: 256 x 144 mm
(II) PSB(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1494 h_border: 0
(II) PSB(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
(WW) PSB(0): Unknown vendor-specific block f
(II) PSB(0): AUO
(II) PSB(0): B116XW02 V0
(II) PSB(0): EDID (in hex):
(II) PSB(0): 00ffffffffffff0006af5c2000000000
(II) PSB(0): 01120103801a0e780a99859555569228
(II) PSB(0): 22505400000001010101010101010101
(II) PSB(0): 010101010101201c5680500023303020
(II) PSB(0): 36000090100000180000000f00000000
(II) PSB(0): 00000000000000000020000000fe0041
(II) PSB(0): 554f0a202020202020202020000000fe
(II) PSB(0): 004231313658573032205630200a00be
(II) PSB(0): EDID vendor "AUO", prod id 8284
(II) PSB(0): Printing DDC gathered Modelines:
(II) PSB(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
(II) PSB(0): Debug: psbLVDSSetProperty
(II) PSB(0): EDID vendor "AUO", prod id 8284
(II) PSB(0): Debug: psbLVDSModeValid
(II) PSB(0): Printing probed modes for output LVDS0
(II) PSB(0): Modeline "1366x768"x60.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
(II) PSB(0): Debug: xxi830_sdvo_detect 1
(II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
(II) PSB(0): SDVO: R: 00 00 (Not supported)
(II) PSB(0): Debug: SDVO: W: 0D 01 00 (i830_SDVO_CMD_SET_ACTIVE_HOT_PLUG)
(II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
(II) PSB(0): Debug: xxi830_sdvo_dpms 0, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 03 (i830_SDVO_CMD_GET_TRAINED_INPUTS)
(II) PSB(0): SDVO: R: 00 (Success)
(EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): Debug: SDVO: W: 02 (i830_SDVO_CMD_GET_DEVICE_CAPS)
(II) PSB(0): SDVO: R: 02 42 02 01 01 3D 3E 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Pending)
(II) PSB(0): SDVO: R: 00 00 (Success)
(II) PSB(0): Debug: xxi830_sdvo_dpms 3, active_outputs=0
(II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
(II) PSB(0): SDVO: R: (Success)
(II) PSB(0): EDID for output SDVO-1Hors ligne
Pages : 1