Ubuntu-fr

ognio2007

souci de wifi avec Livebox Sagem

Bonjour

souci de wifi avec Livebox Sagem :

Voici les données du terminal :

1
francois@francois-desktop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.04
DISTRIB_CODENAME=jaunty
DISTRIB_DESCRIPTION="Ubuntu 9.04"

2
francois@francois-desktop:~$ lsusb :
Usage: lsusb [options]...
List USB devices
  -v, --verbose
      Increase verbosity (show descriptors)
  -s [[bus]:][devnum]
      Show only devices with specified device and/or
      bus numbers (in decimal)
  -d vendor:[product]
      Show only devices with the specified vendor and
      product ID numbers (in hexadecimal)
  -D device
      Selects which device lsusb will examine
  -t
      Dump the physical USB device hierarchy as a tree
  -V, --version
      Show version of program
3
Usage: lspci [<switches>]

Basic display modes:
-mm        Produce machine-readable output (single -m for an obsolete format)
-t        Show bus tree

Display options:
-v        Be verbose (-vv for very verbose)
-k        Show kernel drivers handling each device
-x        Show hex-dump of the standard part of the config space
-xxx        Show hex-dump of the whole config space (dangerous; root only)
-xxxx        Show hex-dump of the 4096-byte extended config space (root only)
-b        Bus-centric view (addresses and IRQ's as seen by the bus)
-D        Always show domain numbers

Resolving of device ID's to names:
-n        Show numeric ID's
-nn        Show both textual and numeric ID's (names & numbers)
-q        Query the PCI ID database for unknown ID's via DNS
-qq        As above, but re-query locally cached entries
-Q        Query the PCI ID database for all ID's via DNS

Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]    Show only devices in selected slots
-d [<vendor>]:[<device>]            Show only devices with specified ID's

Other options:
-i <file>    Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <file>    Look up kernel modules in a given file instead of default modules.pcimap
-M        Enable `bus mapping' mode (dangerous; root only)

PCI access options:
-A <method>    Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val>    Set PCI access parameter (see `-O help' for a list)
-G        Enable PCI access debugging
-H <mode>    Use direct hardware access (<mode> = 1 or 2)
-F <file>    Read PCI configuration dump from a given file
francois@francois-desktop:~$
4 impossible d aller plus loin............

FRANCOIS