Ubuntu-fr

frodonsfr

mise à jour sageMath

Bonjour,
depuis l'installation de sagemath sous Ubuntu 12.04 j'ai une mise à jour qui renvoie un message d'erreur

installArchives() failed: Setting up sagemath-upstream-binary (5.0.1) ...
Running Sage once as root to set paths
Error: environment variable $HOME is not set.
Error setting environment variables by sourcing '/usr/lib/sage/spkg/bin/sage-env';
possibly contact sage-devel (see http://groups.google.com/group/sage-devel).
dpkg: error processing sagemath-upstream-binary (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
Errors were encountered while processing:
 sagemath-upstream-binary
Error in function: 
Setting up sagemath-upstream-binary (5.0.1) ...
Running Sage once as root to set paths
Error: environment variable $HOME is not set.
Error setting environment variables by sourcing '/usr/lib/sage/spkg/bin/sage-env';
possibly contact sage-devel (see http://groups.google.com/group/sage-devel).
dpkg: error processing sagemath-upstream-binary (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 sagemath-upstream-binary

J'ai essayé d'aller voir le fichier /usr/lib/sage/spkg/bin/sage-env, mais cela dépasse mes (maigres) compétences.
Si vous pouviez m'aider, merci d'avance.

Bouib

Re : mise à jour sageMath

bonjour,
un petit :
cat /usr/lib/sage/spkg/bin/sage-env
dans un terminal, sinon tu peux aussi demandeer des précisions à https://groups.google.com/forum/?fromgr … sage-devel

---

Amd 64 2xCore Ubuntu 10.04 Lucid Lynx Gnome compiz emerald vienna azenis green slicknessblack aeroion cairo-dock :) "Je suis ce que je suis grâce à ce que nous sommes tous"

frodonsfr

Re : mise à jour sageMath

En fait, j'arrive à lire le contenu de ce fichier, mais je ne vois pas quoi faire.
Je vais essayer ton groupe, mais c'est en anglais.

Bouib

Re : mise à jour sageMath

lol tu peux déjà poster le résultat de ce cat

---

Amd 64 2xCore Ubuntu 10.04 Lucid Lynx Gnome compiz emerald vienna azenis green slicknessblack aeroion cairo-dock :) "Je suis ce que je suis grâce à ce que nous sommes tous"

frodonsfr

Re : mise à jour sageMath

Ok.
Voici la partie qui semble concernée et la totalité du fichier.

# Check that $HOME exists
if [ "$HOME" = "" ]; then
    echo >&2 'Error: environment variable $HOME is not set.'
    return 1
fi
if ! [ -d "$HOME" ]; then
    echo >&2 "Error: HOME directory '$HOME' does not exist."
    return 1
fi

# -*- shell-script -*-

###########################################################################
#
#  Set environment variables for building and/or running Sage.
#  You must *source* this instead of executing; see below!
#
#  IMPORTANT: use "return" instead of "exit" to signal a failure when
#             sourcing this script.  An "exit" here will actually exit
#             spkg/bin/sage, which is probably not intented.
#
#  AUTHORS:   William Stein                            2005-12
#             David Kirkby <david.kirkby@onetel.net>   2005-12-17
#
###########################################################################

##########################################################################
#
#  If you want to set all environment variables for your shell like
#  they are during the build of Sage packages, type
#
#             source spkg/bin/sage-env
#
#  from the SAGE_ROOT directory.   To do the same from a /bin/bash
#  script use ". spkg/bin/sage-env".
#
##########################################################################


# Resolve all symbolic links in a filename.  This more or less behaves
# like "readlink -f" except that it does not convert the filename to an
# absolute path (a relative path remains relative), nor does it treat
# "." or ".." specially.
#
# AUTHOR: Jeroen Demeyer (2011-08-23): Trac tickets #5852 and #11704
#
resolvelinks() {
    # $in is what still needs to be converted (normally has no starting slash)
    in="$1"
    # $out is the part which is converted (normally ends with trailing slash)
    out="./"

    # Move stuff from $in to $out
    while [ -n "$in" ]; do
        # Normalize $in by replacing consecutive slashes by one slash
        while { in_single_slash=${in//\/\//\/}; [ "$in" != "$in_single_slash" ]; }; do
            in=$in_single_slash
        done

        # If $in starts with a slash, remove it and set $out to the root
        in_without_slash=${in/#\//}
        if [ "$in" != "$in_without_slash" ]; then
            in=$in_without_slash
            out="/"
            continue
        fi

        # Check that the directory $out exists by trying to cd to it.
        # If this fails, then cd will show an error message (unlike
        # test -d "$out"), so no need to be more verbose.
        ( cd "$out" ) || return $?


        # Get the first component of $in
        f=${in%%/*}

        # If it is not a symbolic link, simply move it to $out
        if [ ! -L "$out$f" ]; then
            in=${in#"$f"}
            out="$out$f"

            # If the new $in starts with a slash, move it to $out
            in_without_slash=${in/#\//}
            if [ "$in" != "$in_without_slash" ]; then
                in=$in_without_slash
                out="$out/"
            fi
            continue
        fi

        # Now resolve the symbolic link "$f"
        f_resolved=`readlink -n "$out$f" 2>/dev/null`
        status=$?
        # status 127 means readlink could not be found.
        if [ $status -eq 127 ]; then
            # We don't have "readlink", try a stupid "ls" hack instead.
            # This will fail if we have filenames like "a -> b".
            fls=`ls -l "$out$f" 2>/dev/null`
            status=$?
            f_resolved=${fls##*-> }

            # If $fls equals $f_resolved, then certainly
            # something is wrong
            if [ $status -eq 0 -a "$fls" = "$f_resolved" ]; then
                echo >&2 "Cannot parse output from ls -l '$out$f'"
                return 1
            fi
        fi
        if [ $status -ne 0 ]; then
            echo >&2 "Cannot read symbolic link '$out$f'"
            return $status
        fi

        # In $in, replace $f by $f_resolved (leave $out alone)
        in=${in/#"$f"/"$f_resolved"}
    done

    # Return $out
    echo "$out"
}


# New value for SAGE_ROOT: either SAGE_ROOT (if given)
# or a guessed value based on pwd.
if [ -n "$SAGE_ROOT" ]; then
    NEW_SAGE_ROOT="$SAGE_ROOT"
elif [ -f sage -a -d spkg ]; then
    NEW_SAGE_ROOT="."
elif [ -f ../../sage -a -d ../../spkg ]; then
    NEW_SAGE_ROOT="../.."
else
    # No idea what SAGE_ROOT should be...
    echo >&2 "Error: You must set the SAGE_ROOT environment variable or run this"
    echo >&2 "script from the SAGE_ROOT or SAGE_ROOT/local/bin/ directory."
    return 1
fi

# Make NEW_SAGE_ROOT absolute
NEW_SAGE_ROOT=`cd "$NEW_SAGE_ROOT" && pwd -P`

# Sanity check NEW_SAGE_ROOT
if [ -f "$NEW_SAGE_ROOT/sage" -a -d "$NEW_SAGE_ROOT/spkg" ]; then
    :
else
    echo >&2 "Error: SAGE_ROOT is set to a bad value:"
    echo >&2 "SAGE_ROOT=$SAGE_ROOT"
    echo >&2 "You must correct it or erase it and run this script from the SAGE_ROOT"
    echo >&2 "or SAGE_ROOT/local/bin/ directory."
    return 1
fi

# Warn if NEW_SAGE_ROOT does not equal the old SAGE_ROOT
if [ "$SAGE_ROOT" != "$NEW_SAGE_ROOT" -a -n "$SAGE_ROOT" ]; then
    echo >&2 "Warning: overwriting SAGE_ROOT environment variable:"
    echo >&2 "Old SAGE_ROOT=$SAGE_ROOT"
    echo >&2 "New SAGE_ROOT=$NEW_SAGE_ROOT"
fi

# Don't execute the commands more than once.  Check this after
# checking the validity of SAGE_ROOT, but before modifying its value.
#
# NOTE: This requires all environment variables to be exported, otherwise
#       they won't be available / set in subshells which do not (fully)
#       source sage-env themselves.
if [ "x$SAGE_ENV_SOURCED" = "x" ]; then
    SAGE_ENV_SOURCED=1
    export SAGE_ENV_SOURCED
else
    # Already sourced, nothing to do.
    return 0
fi

SAGE_ROOT="$NEW_SAGE_ROOT"
export SAGE_ROOT


# Call with: contains_spaces X${VAR}X
# i.e., WITHOUT quotes but some character(s) around the environment variable to test.
# (This function does return false for empty/unset variables.)

contains_spaces()
{
    if [ $# -ne 1 ]; then
        return 0 # true
    else
        return 1 # false
    fi
}


if contains_spaces X${SAGE_ROOT}X ; then
    echo "Error: The path to the Sage directory (\$SAGE_ROOT) MUST NOT contain spaces."
    echo "It is currently \"$SAGE_ROOT\"."
    echo "Please correct this by moving Sage (or renaming one or more directories) first."
    echo "Exiting now..."
    return 1
fi


if [ 1 = 2 ]; then
    echo "The following enviroment variables can be set by the user"
    echo "AR          The archiver (e.g. ar, /usr/ccs/bin/ar or /usr/bin/ar)"
    echo "AS          The assembler (e.g. as, /usr/ccs/bin/as or /usr/bin/as)"
    echo "CC          The C compiler (e.g cc, /opt/SUNWspro/bin/cc or /usr/bin/gcc)"
    echo "CFLAGS      Flag(s) for the C compiler (e.g.  -g -Wall -O2)"
    echo "            (You are advised to a some optimisation flag(s), such as -O2 or -xO2 to CFLAGS)"
    echo "CXX         The C++ compiler (e.g g++, /opt/SUNWspro/bin/CC or /usr/local/bin/g++)"
    echo "CXXFLAGS    Flag(s) for the C++ compiler (e.g. -fast -fsimple=1 -x04)"
    echo "LD          The linker (e.g. ld, /usr/ccs/bin/ld or /usr/bin/ld)"
    echo "LDFLAGS     Linker flag(s) (e.g. -D token)"
    echo "LN          Used to make links (e.g. ln, /usr/xpg4/bin/ln or /usr/bin/ln)"
    echo "MAKE        The make program (e.g. make, /usr/bin/make or /usr/local/bin/gmake)"
    echo "MAKEFLAGS   Flag(s) to make (e.g. -j4)."
    echo "RANLIB      Archiver ranlib (e.g. ranlib, /usr/ccs/bin/ranlib etc)"
    echo "SAGE64      Set to \"yes\" to build a 64-bit binary (Solaris SPARC or Solaris x86 only)"
    echo "SHAREDFLAGS Flag(s) necessary for building a shared library (e.g. -fPIC or -xcode=pic32)"
    echo "We attempt to set this to sensible values, but check below to"
    echo "ensure they are OK. If you wish to override any then please use:"
    echo "setenv NAME_OF_ENVIROMENT_VARIABLE value_of_enviroment_variable"
    echo "(if you use tcsh, csh or a similar shell) or"
    echo "NAME_OF_ENVIROMENT_VARIABLE value_of_enviroment_variable"
    echo "export NAME_OF_ENVIROMENT_VARIABLE"
    echo "if you use sh, bash or a similar shell"
fi

# Setting Sage-related location environment variables.
export SAGE_LOCAL="$SAGE_ROOT/local"
export SAGE_DATA="$SAGE_ROOT/data"
export SAGE_PACKAGES="$SAGE_ROOT/spkg"
export SAGE_LOGS="$SAGE_ROOT/spkg/logs"
export SAGE_DOC="$SAGE_ROOT/devel/sage/doc"
export PATH="$SAGE_PACKAGES/bin:$SAGE_LOCAL/bin:$PATH"

# We offer a toolchain option, so if $SAGE_LOCAL/toolchain/toolchain-env exists source it.
# Since the user might do something crazy we do not do any checks, but hope for the best.
if [ -f $SAGE_LOCAL/toolchain/toolchain-env ]; then
  source $SAGE_LOCAL/toolchain/toolchain-env
fi

# Mac OS X-specific setup
if [ `uname` = "Darwin" ]; then
    # For a framework Python build on OS X, Python's bin directory is not local/bin
    PATH="$SAGE_LOCAL/Frameworks/Python.framework/Versions/2.5/bin:$PATH" && export PATH

    # set MACOSX_DEPLOYMENT_TARGET -- if set incorrectly, this can
    # cause lots of random "Abort trap" issues on OSX. see trac
    # #7095 for an example.
    MACOSX_VERSION=`uname -r | awk -F. '{print $1}'`
    MACOSX_DEPLOYMENT_TARGET=10.$[$MACOSX_VERSION-4]
    export MACOSX_DEPLOYMENT_TARGET
fi

if [ "$LIBRARY_PATH" != "" ]; then
    LIBRARY_PATH="$SAGE_LOCAL/lib/:$LIBRARY_PATH"
else
    LIBRARY_PATH="$SAGE_LOCAL/lib/"
fi
export LIBRARY_PATH

GP_DATA_DIR="$SAGE_LOCAL/share/pari" && export GP_DATA_DIR
GPHELP="$SAGE_LOCAL/bin/gphelp" && export GPHELP
GPDOCDIR="$SAGE_LOCAL/share/pari/doc" && export GPDOCDIR

# Make Mercurial always use utf-8 for usernames,...
# See Trac Ticket #11830
HGENCODING="utf8" && export HGENCODING

# Make Mercurial not use any user defaults (like enabling the pager extension)
# This is needed in order to use mercurial in scripts.  When running hg
# directly through "sage -hg", we will disable HGPLAIN in spkg/bin/sage.
# See Trac Ticket #12058
HGPLAIN="yes" && export HGPLAIN

SINGULARPATH="$SAGE_LOCAL/share/singular" && export SINGULARPATH
SINGULAR_EXECUTABLE="$SAGE_LOCAL/bin/Singular" && export SINGULAR_EXECUTABLE

if [ "$SAGE_SERVER" = "" ]; then
    SAGE_SERVER="http://www.sagemath.org/"
    export SAGE_SERVER
fi

# Check that $HOME exists
if [ "$HOME" = "" ]; then
    echo >&2 'Error: environment variable $HOME is not set.'
    return 1
fi
if ! [ -d "$HOME" ]; then
    echo >&2 "Error: HOME directory '$HOME' does not exist."
    return 1
fi

if [ "$DOT_SAGE" = "" ]; then
    # It is *not* an error if this directory does not exist, it will
    # be created in spkg/bin/sage.  This also works if $HOME/.sage is a
    # symbolic link to a non-existing directory.
    DOT_SAGE=`resolvelinks "$HOME/.sage"`

    # In theory, DOT_SAGE is not required to have a trailing slash.
    # But since there are some issues (#11924, maybe #12221),
    # we add a slash for safety.
    DOT_SAGE="${DOT_SAGE}/"
    export DOT_SAGE
fi


if [ "$SAGE_STARTUP_FILE" = "" ]; then
    SAGE_STARTUP_FILE="$DOT_SAGE/init.sage"
    export SAGE_STARTUP_FILE
fi

if [ -d "$SAGE_ROOT/local/lib/python" ]; then
    PYTHONPATH="$SAGE_ROOT/local/lib/python"
    if [ -n "$SAGE_PATH" ]; then
        PYTHONPATH="$SAGE_PATH:$PYTHONPATH"
    fi
    PYTHONHOME="$SAGE_ROOT/local"
    export PYTHONPATH
    export PYTHONHOME
fi

if [ -z "${SAGE_ORIG_LD_LIBRARY_PATH_SET}" ]; then
    SAGE_ORIG_LD_LIBRARY_PATH=$LD_LIBRARY_PATH && export SAGE_ORIG_LD_LIBRARY_PATH
    SAGE_ORIG_LD_LIBRARY_PATH_SET=True && export SAGE_ORIG_LD_LIBRARY_PATH_SET
fi

# Should this be a temporary directory instead?  Since sage-ptest and
# sage-test are written in Python, we can set it to
# tempfile.gettempdir() there.
if [ -z "$SAGE_TESTDIR" ]; then
    SAGE_TESTDIR="$DOT_SAGE"/tmp && export SAGE_TESTDIR
fi

# Use a matplotlib config directory specific to Sage and specific to
# the version number of matplotlib, by setting the environment
# variable MPLCONFIGDIR.  See
# http://trac.sagemath.org/sage_trac/ticket/6235 and
# http://trac.sagemath.org/sage_trac/ticket/9221.  Find the version
# number for matplotlib by reading the file
# SAGE_LOCAL/lib/python/site-packages/matplotlib/__init__.py, and use
# the version number in the name of the directory.  If that file
# doesn't exist, matplotlib hasn't been installed yet, so don't set
# MPLCONFIGDIR.
MPLINITFILE="$SAGE_LOCAL/lib/python/site-packages/matplotlib/__init__.py"
if [ -f "$MPLINITFILE" ]; then
    MPLVERSION=`sed -n "/^__version__[ ]*=/s/[^']*'\([^']*\)'.*$/\1/p" "$MPLINITFILE"`
    if [ "$MPLVERSION" != "" ]; then
        MPLCONFIGDIR="$DOT_SAGE/matplotlib-$MPLVERSION"
    else
        # MPLVERSION is empty, so no version found.
        MPLCONFIGDIR="$DOT_SAGE/matplotlib"
    fi
    export MPLCONFIGDIR
    # Create the directory, because matplotlib doesn't seem to be happy otherwise.
    mkdir -p "$MPLCONFIGDIR"
fi

# Add some directories to $LD_LIBRARY_PATH:
# * lib/openmpi is needed for openmpi.
# * lib/R/lib is needed for R in case the Sage install is moved.
# * lib32 and lib64 are needed for GCC, see #12405.
for d in lib/openmpi lib/R/lib lib32 lib64 lib; do
    libdir="$SAGE_LOCAL/$d"
    # Add only existing directories
    if [ -d "$libdir" ]; then
        LD_LIBRARY_PATH="$libdir:$LD_LIBRARY_PATH"
    fi
done
export LD_LIBRARY_PATH

# The following is needed for OS X (especially for the
# Singular install).
if [ `uname` = "Darwin" ]; then
    if [ -z "${SAGE_ORIG_DYLD_LIBRARY_PATH_SET}" ]; then
        SAGE_ORIG_DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH && export SAGE_ORIG_DYLD_LIBRARY_PATH
        SAGE_ORIG_DYLD_LIBRARY_PATH_SET=True && export SAGE_ORIG_DYLD_LIBRARY_PATH_SET
    fi
    DYLD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DYLD_LIBRARY_PATH:$SAGE_LOCAL/lib/R/lib" && export DYLD_LIBRARY_PATH
fi

if [ "$1" = "-short" ]; then
    return 0
fi

if [ -z "$RHOME" ]; then
    RHOME="$SAGE_LOCAL/lib/R" && export RHOME
fi

MAXIMA_PREFIX="$SAGE_ROOT/local" && export MAXIMA_PREFIX

# PKG_CONFIG_PATH is used by 'pkg-config' on Solaris and Linux, 
# but at least some versions of OS X do not have the pkg-config 
# command, so relying on this is not wise on OS X. 

if [ -z "$PKG_CONFIG_PATH" ]; then
    PKG_CONFIG_PATH="$SAGE_LOCAL/lib/pkgconfig"
else
    PKG_CONFIG_PATH="$SAGE_LOCAL/lib/pkgconfig:$PKG_CONFIG_PATH"
fi
export PKG_CONFIG_PATH


############ compilation flags

UNAME=`uname`
if [ `uname | sed -e 's/WIN.\+/WIN/'` = "CYGWIN" ]; then
    UNAME="CYGWIN"
fi
export UNAME

# Setting Sage-related compilation flags.
# This could be used in code to make special changes only when
# code is being built as part of Sage.
export __sage__=""

# Set the C and C++ compilers
if [ -z "$CC" ]; then
    # On OS X 10.7 (Lion) or later when building GCC, use clang as
    # default C compiler as some older versions of XCode 4 ship broken
    # versions of GCC which fail to bootstrap GCC-4.6.3.
    # See http://trac.sagemath.org/sage_trac/ticket/12820
    if [ "$SAGE_BUILD_TOOLCHAIN" = yes ] && [ "$UNAME" = Darwin ] && [ `uname -r | cut -d. -f1` -ge 11 ]; then
        CC=`which clang 2>/dev/null`
    fi
fi
if [ -z "$CC" ]; then
    CC=gcc
fi
if [ -z "$CXX" ]; then
    CXX=g++
fi

# An Objective-C compiler is needed for R on Darwin.
# On Darwin, /usr/bin/cc supports Objective-C.  The gcc shipped with
# Sage doesn't.
if [ "$UNAME" = "Darwin" ]; then
    if [ -z "$OBJC" -a -x "/usr/bin/cc" ]; then
        export OBJC=/usr/bin/cc
    fi
    if [ -z "$OBJCXX" -a -x "/usr/bin/c++" ]; then
        export OBJCXX=/usr/bin/c++
    fi
fi

# Override CC and CXX if the gcc spkg was installed.
if [ -x "$SAGE_LOCAL/bin/gcc" ]; then
    CC=gcc
fi
if [ -x "$SAGE_LOCAL/bin/g++" ]; then
    CXX=g++
fi
export CC CXX


if [ "$LD" = "" ]; then
    LD="ld"  && export LD
fi
if [ "$AR" = "" ]; then
    AR="ar"  && export AR
fi
if [ "$AS" = "" ]; then
    AS="as"  && export AS
fi

if [ "$LDFLAGS" = "" ]; then
    LDFLAGS=""          && export LDFLAGS
fi

if [ "$SAGE64" = "" ]; then
    SAGE64="no"
fi 

if [ "$SAGE64" != "yes" -a "$SAGE64" != "no" ]; then
    echo "The environment variable SAGE64 (=$SAGE64) must be either unset, yes or no."
    return 1
fi

# In case SAGE64 has been set to yes before re-inject it into the environment
# This is only done on OSX and Solaris since those are the only real multi lib
# arches we support. Eventually Linux PPC on the PS3 might need to be added here
source "$SAGE_LOCAL/bin/sage-check-64" 1> /dev/null 2> /dev/null
export SAGE64

if [ "$CXXFLAGS" = "" ]; then
    export CXXFLAGS="$CFLAGS"
fi

if [ "$CP" = "" ]; then
    CP="cp"  && export CP
fi

if [ "$MV" = "" ]; then
    MV="mv"  && export MV
fi

if [ "$RANLIB" = "" ]; then
    RANLIB="ranlib"  && export RANLIB
fi
 
if [ "$LN" = "" ]; then
    LN="ln"  && export LN
fi
 
if [ "$MKDIR" = "" ]; then
    MKDIR="mkdir"  && export MKDIR
fi
 
if [ "$CHMOD" = "" ]; then
    CHMOD="chmod"  && export CHMOD
fi
 
if [ "$TOUCH" = "" ]; then
    TOUCH="touch"  && export TOUCH
fi

if [ "$UNAME" = "CYGWIN" ]; then
    PATH="$PATH:$SAGE_LOCAL/lib" && export PATH
fi

# See trac 7186 -- this is needed if ecl is moved
ECLDIR="$SAGE_LOCAL/lib/ecl/" && export ECLDIR

# Handle parallel building/testing/...
# See Trac Ticket #12016
# First, figure out the right values for SAGE_NUM_THREADS (default
# number of threads) and SAGE_NUM_THREADS_PARALLEL (default number of
# threads when parallel execution is asked explicitly).
sage_num_threads_array=(`sage-num-threads.py 2>/dev/null || echo 1 2 1`)
SAGE_NUM_THREADS=${sage_num_threads_array[0]}
SAGE_NUM_THREADS_PARALLEL=${sage_num_threads_array[1]}
export SAGE_NUM_THREADS
export SAGE_NUM_THREADS_PARALLEL

if [ "$MAKE" = "" ]; then
    MAKE="make"
fi

# If MAKEFLAGS exists, assume it got set by make.
# Therefore, remove all flags from $MAKE
if [ "${MAKEFLAGS-__unset__}" != "__unset__" ]; then
    MAKE=`echo "$MAKE" | sed 's/ .*//'`
fi
export MAKE


# You can set environment variables in $SAGE_RC_FILE
# (by default, this is the file $DOT_SAGE/sagerc).  For example,
# setting PS1 there will set your prompt when you run "sage --sh".
if [ -z "$SAGE_RC_FILE" ]; then
    SAGE_RC_FILE="$DOT_SAGE/sagerc"
fi

if [ -r "$SAGE_RC_FILE" ]; then
    source "$SAGE_RC_FILE"
    if [ $? -ne 0 ]; then
        echo >&2 "Error sourcing $SAGE_RC_FILE"
        exit 1
    fi
fi

xanmoo

Re : mise à jour sageMath

Bonjour,
On peut faire tourner Sage en local en téléchargeant la bête, mais on peut aussi l'utiliser online .http://www.sagenb.org/

Dernière modification par xanmoo (Le 10/09/2012, à 13:14)

---

Portable IBM Thinkpad R50e 2 Go | 40 Go: MX Linux 19.4
Portable IBM Thinkpad T430 8 Go | 240 Go: endeavour OS
Dell Precision T5500, Xeon x5570, 24Go, GTX 960- 4Go,  SSD 120Go, Ubuntu 22.04
http://dip4fish.blogspot.com/

patrick L

Re : mise à jour sageMath

faites donc dans un terminal

ls -l /home

et dans les dossiers qui s'affichent  faut mettre le $HOME = /home/votreLogin

Dernière modification par patrick L (Le 21/09/2012, à 18:55)

lynn

Re : mise à jour sageMath

T'es quoi peterson ? Un robot qui déterre les topics... J'en compte au moins quatre et quand je vois que ton inscription est d'aujourd'hui et la façon dont tes messages sont formés, ça me met un doute...

Peut-être me trompe-je..?

---

«C'est pas parce qu'ils sont nombreux à avoir tort qu'ils ont raison!»

Coluche