probleme open arena

gabigab360 · Le 29/09/2007, à 23:26

Bonjour

Quand je joue des fois il se coupe et je dois eteindre l'ordi pas comme il faut ! Pareil quand je quitte le jeu.

Est-ce du au fait que je suis sur la version instable qui sort en octobre svp ?

Astier · Le 30/09/2007, à 00:33

Modèle de carte graphique ? Fichier /etc/X11/xorg.conf ? Log de X ? sortie de dmesg ?

Boule de cristal

A+

gabigab360 · Le 30/09/2007, à 10:07

Nvidia GeForce Go 6100.
Voila
Je vous remercie d'avance !

Car j'ai les memes problemes avec Nexuiz !

Dernière modification par gabigab360 (Le 30/09/2007, à 10:22)

daemon666 · Le 30/09/2007, à 10:56

Bon je te le redis ici, copie nous un cat /etc/X11/xorg.conf et fait un dmesg.
Sous linux, pas besoin d'éteindre l'ordi en cas de problème, je te ferais voir ce que tu peux faire.

gabigab360 · Le 30/09/2007, à 11:55

ok merci, on verra cet aprem, car là, je ne comprends pas tout.....:/

cat_loic · Le 30/09/2007, à 12:03

Juste une question... Utilises tu Beryl/Compiz/Compiz Fusion ?
Si oui, alors il faut les arrêter avant de jouer...
Si non, ben je ne sais pas...

gabigab360 · Le 30/09/2007, à 12:13

Comment on sait qu'on utilise Compiz ou bery ?

J'ai téléchargé un jeu, Tux Racer, j'ai remarqué que c'était avec les jeux qui se jouent en plein écran, quand je les quitte, je dois eteindre de la mauvaise façon mon pc.

Astier · Le 30/09/2007, à 12:55

Ok alors quelle version d'Ubuntu utilises-tu ? As-tu activé les effets de bureau ?

Dans un terminal, tu tappes

dmesg

et tu colles ici le résultat. Tu postes également le fichier /etc/X11/xorg.conf

gedit /etc/X11/xorg.conf

Et puis, dans un terminal, tu lances ton jeu, je suppose avec la commande

open-arena

(à vérifier) et tu devrais avoir des messages d'erreur. Vérifies les options potentielles de ce "lanceur" afin de voir s'il y a un moyen de le lancer seulement en mode fenêtre.

Lorsque ton jeu plante, pas besoin de redémarrer, seulement de relancer le serveurX : Ctrl+Alt+Backspace

A+

Dernière modification par Astier (Le 30/09/2007, à 12:57)

adam0509 · Le 30/09/2007, à 22:13

openarena

tout attaché

Lorsque ton jeu plante, pas besoin de redémarrer, seulement de relancer le serveurX : Ctrl+Alt+Backspace

non, faire CTRL+ALT+F1, se connecter, et taper "killall -9 openarena"

Ensuite faire CTRL+ALT+F7 et regarder ce que dis la console...

Astier · Le 30/09/2007, à 23:20

@adam0509 : encore mieux Merci pour ces précisions

A+

darkarexenen · Le 10/04/2008, à 16:21

Bonjour , j'ai le meme probleme .

je suis un neophyte et j utilise linux depuis peu
quand je met dmesg dans le terminal , il me met ca :

[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262004
[ 0.000000] On node 0 totalpages: 262004
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32374 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FEB90 checksum 0
[ 0.000000] ACPI: RSDP 000FEB90, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 000FD1CB, 0034 (r1 DELL 8300 7 ASL 61)
[ 0.000000] ACPI: FACP 000FD1FF, 0074 (r1 DELL 8300 7 ASL 61)
[ 0.000000] ACPI: DSDT FFFC6BE6, 2426 (r1 DELL dt_ex 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FF74000, 0040
[ 0.000000] ACPI: SSDT FFFC900C, 00A7 (r1 DELL st_ex 1000 MSFT 100000D)
[ 0.000000] ACPI: APIC 000FD273, 006C (r1 DELL 8300 7 ASL 61)
[ 0.000000] ACPI: BOOT 000FD2DF, 0028 (r1 DELL 8300 7 ASL 61)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Built 1 zonelists. Total pages: 259958
[ 0.000000] Kernel command line: root=UUID=c654e799-c348-40cc-8033-2c6e3ee7dd61 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2992.890 MHz processor.
[ 10.241859] Console: colour VGA+ 80x25
[ 10.242180] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 10.242513] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.264908] Memory: 1027404k/1048016k available (2015k kernel code, 19956k reserved, 915k data, 364k init, 130512k highmem)
[ 10.264918] virtual kernel memory layout:
[ 10.264919] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 10.264920] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.264921] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.264922] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.264924] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 10.264925] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 10.264926] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 10.264929] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.264969] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 10.344953] Calibrating delay using timer specific routine.. 5989.79 BogoMIPS (lpj=11979595)
[ 10.344978] Security Framework v1.0.0 initialized
[ 10.344983] SELinux: Disabled at boot.
[ 10.344995] Mount-cache hash table entries: 512
[ 10.345120] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 10.345129] monitor/mwait feature present.
[ 10.345131] using mwait in idle threads.
[ 10.345138] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 10.345140] CPU: L2 cache: 1024K
[ 10.345143] CPU: Physical Processor ID: 0
[ 10.345145] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000
[ 10.345156] Compat vDSO mapped to ffffe000.
[ 10.345172] Checking 'hlt' instruction... OK.
[ 10.361038] SMP alternatives: switching to UP code
[ 10.361462] Early unpacking initramfs... done
[ 10.644347] ACPI: Core revision 20070126
[ 10.656094] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.679519] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 10.679567] SMP alternatives: switching to SMP code
[ 10.679752] Booting processor 1/1 eip 3000
[ 10.690004] Initializing CPU#1
[ 10.768741] Calibrating delay using timer specific routine.. 5983.96 BogoMIPS (lpj=11967931)
[ 10.768751] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 10.768758] monitor/mwait feature present.
[ 10.768765] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 10.768768] CPU: L2 cache: 1024K
[ 10.768771] CPU: Physical Processor ID: 0
[ 10.768773] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000
[ 10.769148] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 10.769190] Total of 2 processors activated (11973.76 BogoMIPS).
[ 10.769318] ENABLING IO-APIC IRQs
[ 10.769498] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.916780] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 10.936787] Brought up 2 CPUs
[ 11.023001] migration_cost=86
[ 11.023168] Booting paravirtualized kernel on bare hardware
[ 11.023237] Time: 15:13:44 Date: 03/10/108
[ 11.023262] NET: Registered protocol family 16
[ 11.023352] EISA bus registered
[ 11.023357] ACPI: bus type pci registered
[ 11.023409] PCI: PCI BIOS revision 2.10 entry at 0xfbb31, last bus=2
[ 11.023411] PCI: Using configuration type 1
[ 11.023413] Setting up standard PCI resources
[ 11.024869] ACPI: EC: Look up EC in DSDT
[ 11.053301] ACPI: Interpreter enabled
[ 11.053305] ACPI: (supports S0 S1 S3 S4 S5)
[ 11.053327] ACPI: Using IOAPIC for interrupt routing
[ 11.083010] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.083030] PCI: Probing PCI hardware (bus 00)
[ 11.083496] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 11.083500] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 11.084020] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 11.084089] PCI: Transparent bridge - 0000:00:1e.0
[ 11.084117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.084563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 11.191920] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 11.192237] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 11.192548] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 11.192867] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 11.193179] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 11.193489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 11.193800] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 11.194112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 11.194255] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.194270] pnp: PnP ACPI init
[ 11.194279] ACPI: bus type pnp registered
[ 11.218762] pnp: PnP ACPI: found 12 devices
[ 11.218765] ACPI: ACPI bus type pnp unregistered
[ 11.218770] PnPBIOS: Disabled by ACPI PNP
[ 11.218824] PCI: Using ACPI for IRQ routing
[ 11.218827] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.227118] NET: Registered protocol family 8
[ 11.227121] NET: Registered protocol family 20
[ 11.227181] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 11.227185] pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 11.227188] pnp: 00:00: iomem range 0x1000000-0x3ff73fff could not be reserved
[ 11.227191] pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved
[ 11.227203] pnp: 00:0b: ioport range 0x800-0x85f has been reserved
[ 11.227206] pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved
[ 11.227209] pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved
[ 11.228544] Time: tsc clocksource has been installed.
[ 11.257559] PCI: Bridge: 0000:00:01.0
[ 11.257562] IO window: disabled.
[ 11.257567] MEM window: fd000000-feafffff
[ 11.257571] PREFETCH window: f0000000-f7ffffff
[ 11.257577] PCI: Bridge: 0000:00:1e.0
[ 11.257580] IO window: d000-dfff
[ 11.257586] MEM window: fce00000-fcffffff
[ 11.257590] PREFETCH window: 50000000-500fffff
[ 11.257607] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.257618] NET: Registered protocol family 2
[ 11.296634] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.296710] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 11.297609] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.297942] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.297945] TCP reno registered
[ 11.308766] checking if image is initramfs... it is
[ 11.760314] Switched to high resolution mode on CPU 0
[ 11.760393] Switched to high resolution mode on CPU 1
[ 12.199169] Freeing initrd memory: 7044k freed
[ 12.199269] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 12.199273] Simple Boot Flag at 0x7a set to 0x1
[ 12.199736] audit: initializing netlink socket (disabled)
[ 12.199748] audit(1207840424.344:1): initialized
[ 12.199845] highmem bounce pool size: 64 pages
[ 12.202140] VFS: Disk quotas dquot_6.5.1
[ 12.202200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.202295] io scheduler noop registered
[ 12.202298] io scheduler anticipatory registered
[ 12.202300] io scheduler deadline registered
[ 12.202316] io scheduler cfq registered (default)
[ 12.202404] Boot video device is 0000:01:00.0
[ 12.202577] isapnp: Scanning for PnP cards...
[ 12.553989] isapnp: No Plug & Play device found
[ 12.585344] Real Time Clock Driver v1.12ac
[ 12.585432] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.585522] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.586218] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.586979] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.587182] input: Macintosh mouse button emulation as /class/input/input0
[ 12.587273] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 12.590159] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.590167] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.590370] mice: PS/2 mouse device common for all mice
[ 12.590500] EISA: Probing bus 0 at eisa.0
[ 12.590539] EISA: Detected 0 cards.
[ 12.590618] TCP cubic registered
[ 12.590630] NET: Registered protocol family 1
[ 12.590652] Using IPI No-Shortcut mode
[ 12.590801] Magic number: 4:496:234
[ 12.590837] hash matches device ttyv4
[ 12.591379] Freeing unused kernel memory: 364k freed
[ 12.610897] input: AT Translated Set 2 keyboard as /class/input/input1
[ 13.878394] AppArmor: AppArmor initialized<5>audit(1207840426.344:2): type=1505 info="AppArmor initialized" pid=1182
[ 13.887306] fuse init (API version 7.8)
[ 13.892594] Failure registering capabilities with primary security module.
[ 14.567265] usbcore: registered new interface driver usbfs
[ 14.567361] usbcore: registered new interface driver hub
[ 14.567447] usbcore: registered new device driver usb
[ 14.571358] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
[ 14.571373] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.571379] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.571522] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 14.571562] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.571570] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 14.571582] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 14.575469] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 14.575808] usb usb1: configuration #1 chosen from 1 choice
[ 14.575921] hub 1-0:1.0: USB hub found
[ 14.575943] hub 1-0:1.0: 8 ports detected
[ 14.595652] USB Universal Host Controller Interface driver v3.0
[ 14.609476] SCSI subsystem initialized
[ 14.624744] libata version 2.21 loaded.
[ 14.679813] ata_piix 0000:00:1f.1: version 2.11
[ 14.679835] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
[ 14.679873] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.679954] scsi0 : ata_piix
[ 14.689776] scsi1 : ata_piix
[ 14.689937] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 14.689949] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 14.717324] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 14.717335] originally by Donald Becker <becker@scyld.com>
[ 14.717340] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 14.780251] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 14.780267] e100: Copyright(c) 1999-2006 Intel Corporation
[ 14.859476] ata1.00: ATA-6: WDC WD800BB-75FJA1, 14.03G14, max UDMA/100
[ 14.859496] ata1.00: 156250000 sectors, multi 8: LBA
[ 14.859687] ata1.01: ATA-6: WDC WD800BB-75FJA1, 14.03G14, max UDMA/100
[ 14.859699] ata1.01: 156250000 sectors, multi 8: LBA
[ 14.867614] ata1.00: configured for UDMA/100
[ 14.875368] ata1.01: configured for UDMA/100
[ 14.896217] FDC 0 is a post-1991 82077
[ 15.158648] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 15.291591] usb 1-4: configuration #1 chosen from 1 choice
[ 15.322539] usbcore: registered new interface driver libusual
[ 15.333307] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.333315] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.336545] Initializing USB Mass Storage driver...
[ 15.336662] scsi2 : SCSI emulation for USB Mass Storage devices
[ 15.336750] usbcore: registered new interface driver usb-storage
[ 15.336755] USB Mass Storage support registered.
[ 15.336895] usb-storage: device found at 3
[ 15.336899] usb-storage: waiting for device to settle before scanning
[ 15.359001] ata2.00: ATAPI: PHILIPS DVDR1640P, P2.2, max UDMA/33
[ 15.359008] ata2.01: ATAPI: _NEC DVD+RW ND-2100AD, 103D, max UDMA/33
[ 15.530914] ata2.00: configured for UDMA/33
[ 15.702599] ata2.01: configured for UDMA/33
[ 15.702728] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75FJ 14.0 PQ: 0 ANSI: 5
[ 15.702886] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-75FJ 14.0 PQ: 0 ANSI: 5
[ 15.704784] scsi 1:0:0:0: CD-ROM PHILIPS DVDR1640P P2.2 PQ: 0 ANSI: 5
[ 15.705826] scsi 1:0:1:0: CD-ROM _NEC DVD+RW ND-2100AD 103D PQ: 0 ANSI: 5
[ 15.705903] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 15.705925] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
[ 15.705964] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 15.706152] scsi3 : ata_piix
[ 15.706319] scsi4 : ata_piix
[ 15.706356] ata3: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fea0 irq 17
[ 15.706361] ata4: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fea8 irq 17
[ 16.018306] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 16.018324] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 16.018331] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 16.018601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 16.018632] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
[ 16.019174] usb usb2: configuration #1 chosen from 1 choice
[ 16.019404] hub 2-0:1.0: USB hub found
[ 16.019415] hub 2-0:1.0: 2 ports detected
[ 16.122323] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[ 16.122339] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.122345] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.122381] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 16.122412] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 16.122555] usb usb3: configuration #1 chosen from 1 choice
[ 16.122597] hub 3-0:1.0: USB hub found
[ 16.122605] hub 3-0:1.0: 2 ports detected
[ 16.226251] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 16.226265] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.226270] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.226309] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 16.226333] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000ff40
[ 16.226470] usb usb4: configuration #1 chosen from 1 choice
[ 16.226512] hub 4-0:1.0: USB hub found
[ 16.226522] hub 4-0:1.0: 2 ports detected
[ 16.330209] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18
[ 16.330223] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 16.330229] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 16.330262] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 16.330286] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000ff20
[ 16.330423] usb usb5: configuration #1 chosen from 1 choice
[ 16.330468] hub 5-0:1.0: USB hub found
[ 16.330478] hub 5-0:1.0: 2 ports detected
[ 16.434306] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 16.436072] natsemi eth0: NatSemi DP8381[56] at 0xfcefa000 (0000:02:01.0), 00:14:6c:30:68:66, IRQ 20, port TP.
[ 16.436236] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 16.466029] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 16.488035] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fcef9000-fcef97ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 16.498063] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 16.521711] e100: eth1: e100_probe: addr 0xfcefb000, irq 22, MAC addr 00:0C:F1:E5:6D:9E
[ 16.521752] ACPI: PCI Interrupt 0000:02:02.2[b] -> GSI 18 (level, low) -> IRQ 17
[ 16.571591] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fcef8800-fcef8fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 16.592472] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 16.592519] sd 0:0:0:0: [sda] Write Protect is off
[ 16.592524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.592552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.592627] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 16.592642] sd 0:0:0:0: [sda] Write Protect is off
[ 16.592646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.592673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.592679] sda: sda1 sda2 < sda5 >
[ 16.635656] sd 0:0:0:0: [sda] Attached SCSI disk
[ 16.635740] sd 0:0:1:0: [sdb] 156250000 512-byte hardware sectors (80000 MB)
[ 16.635758] sd 0:0:1:0: [sdb] Write Protect is off
[ 16.635762] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 16.635788] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.635857] sd 0:0:1:0: [sdb] 156250000 512-byte hardware sectors (80000 MB)
[ 16.635874] sd 0:0:1:0: [sdb] Write Protect is off
[ 16.635879] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 16.635907] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.635911] sdb: sdb1
[ 16.641246] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 16.647029] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.647262] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 16.647498] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 16.647735] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 16.657335] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 16.657342] Uniform CD-ROM driver Revision: 3.20
[ 16.657655] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.661145] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 16.661441] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 16.747137] usb 3-1: configuration #1 chosen from 1 choice
[ 17.089996] Attempting manual resume
[ 17.090001] swsusp: Resume From Partition 8:5
[ 17.090003] PM: Checking swsusp image.
[ 17.090213] PM: Resume from disk failed.
[ 17.103954] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 17.103959] EXT3-fs: write access will be enabled during recovery.
[ 17.769536] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000d100812cc9a5]
[ 18.041403] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c041103e71e]
[ 18.512459] kjournald starting. Commit interval 5 seconds
[ 18.512475] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 18.512483] ext3_orphan_cleanup: deleting unreferenced inode 3326128
[ 18.512524] EXT3-fs: sda1: 1 orphan inode deleted
[ 18.512526] EXT3-fs: recovery complete.
[ 18.536181] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.332256] usb-storage: device scan complete
[ 20.332757] scsi 2:0:0:0: Direct-Access HP Photosmart C418x 1.00 PQ: 0 ANSI: 2
[ 20.334023] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 20.334062] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 24.902689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.083202] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.092743] Linux agpgart interface v0.102 (c) Dave Jones
[ 25.111570] agpgart: Detected an Intel i875 Chipset.
[ 25.120082] agpgart: AGP aperture is 128M @ 0xe8000000
[ 25.160609] iTCO_vendor_support: vendor-support=0
[ 25.163795] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 25.163892] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 25.163947] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.197885] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
[ 25.197889] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
[ 25.197892] you are certain that your <4>intel_rng: system has a functional
[ 25.197894] RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
[ 25.216055] EDAC MC: Ver: 2.0.1 Feb 12 2008
[ 25.217702] EDAC i82875p: i82875p init one
[ 25.227417] PCI: Unable to reserve mem region #1:1000@fecf0000 for device 0000:00:06.0
[ 25.227559] EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0
[ 25.239873] input: PC Speaker as /class/input/input2
[ 26.306626] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 26.391386] parport_pc 00:0a: reported by Plug and Play ACPI
[ 26.391439] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 26.420362] nvidia: module license 'NVIDIA' taints kernel.
[ 26.764945] Linux video capture interface: v2.00
[ 26.889820] pwc: Philips webcam module version 10.0.13 loaded.
[ 26.889837] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 26.889852] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 26.889864] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 26.890090] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 26.890286] pwc: Registered as /dev/video0.
[ 26.892766] usbcore: registered new interface driver Philips webcam
[ 27.105201] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 27.105382] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 27.353636] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5711
[ 27.353681] usbcore: registered new interface driver usblp
[ 27.353690] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 27.670549] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 23
[ 27.674561] Installing spdif_bug patch: Audigy 2 ZS [SB0353]
[ 27.848453] usbcore: registered new interface driver snd-usb-audio
[ 28.855900] lp0: using parport0 (interrupt-driven).
[ 28.928628] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
[ 29.266486] EXT3 FS on sda1, internal journal
[ 30.165345] No dock devices found.
[ 30.294194] input: Power Button (FF) as /class/input/input4
[ 30.294225] ACPI: Power Button (FF) [PWRF]
[ 30.294286] input: Power Button (CM) as /class/input/input5
[ 30.294312] ACPI: Power Button (CM) [VBTN]
[ 31.697425] ppdev: user-space parallel port driver
[ 31.923485] audit(1207840444.965:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5013 profile="/usr/sbin/cupsd"
[ 31.994717] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 31.994723] apm: disabled - APM is not SMP safe.
[ 32.124960] eth0: DSPCFG accepted after 0 usec.
[ 32.124969] eth0: link up.
[ 32.124976] eth0: Setting full-duplex based on negotiated link capability.
[ 32.346083] Failure registering capabilities with primary security module.
[ 32.922066] Bluetooth: Core ver 2.11
[ 32.922394] NET: Registered protocol family 31
[ 32.922401] Bluetooth: HCI device and connection manager initialized
[ 32.922408] Bluetooth: HCI socket layer initialized
[ 32.947182] Bluetooth: L2CAP ver 2.8
[ 32.947189] Bluetooth: L2CAP socket layer initialized
[ 33.025981] Bluetooth: RFCOMM socket layer initialized
[ 33.026209] Bluetooth: RFCOMM TTY layer initialized
[ 33.026214] Bluetooth: RFCOMM ver 1.8
[ 36.057404] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 36.057421] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 36.057452] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 37.496495] NET: Registered protocol family 17
[ 41.336278] NET: Registered protocol family 10
[ 41.337272] lo: Disabled Privacy Extensions
[ 41.337979] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 51.497238] eth0: no IPv6 routers present

darkarexenen · Le 10/04/2008, à 16:25

pour gedit /etc/X11/xorg.conf il met ca :

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Modelname "Custom 1"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5200]"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1400 1050
Modes "1280x1024@60" "1400x1050@60" "1280x960@60" "1152x864@75" "1024x768@43" "1024x768@60" "1024x768@70" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 29/09/2007, à 23:26

probleme open arena

#2 Le 30/09/2007, à 00:33

Re : probleme open arena

#3 Le 30/09/2007, à 10:07

Re : probleme open arena

#4 Le 30/09/2007, à 10:56

Re : probleme open arena

#5 Le 30/09/2007, à 11:55

Re : probleme open arena

#6 Le 30/09/2007, à 12:03

Re : probleme open arena

#7 Le 30/09/2007, à 12:13

Re : probleme open arena

#8 Le 30/09/2007, à 12:55

Re : probleme open arena

#9 Le 30/09/2007, à 22:13

Re : probleme open arena

#10 Le 30/09/2007, à 23:20

Re : probleme open arena

#11 Le 10/04/2008, à 16:21

Re : probleme open arena

#12 Le 10/04/2008, à 16:25

Re : probleme open arena

Pied de page des forums