#1 Le 11/02/2014, à 13:55
- nam1962
Mon démarrage sous Trusty est trrrès lent et le vôtre ?
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5916132K/6169368K available (7290K kernel code, 1136K rwdata, 3368K rodata, 1328K init, 1436K bss, 253236K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.446 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.89 BogoMIPS (lpj=9577784)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000019] init_memory_mapping: [mem 0x9a4bf000-0x9a8befff]
[ 0.000021] [mem 0x9a4bf000-0x9a5fffff] page 4k
[ 0.000022] [mem 0x9a600000-0x9a7fffff] page 2M
[ 0.000023] [mem 0x9a800000-0x9a8befff] page 4k
[ 0.000048] init_memory_mapping: [mem 0x9a8bf000-0x9aabefff]
[ 0.000049] [mem 0x9a8bf000-0x9aabefff] page 4k
[ 0.035528] Security Framework initialized
[ 0.035548] AppArmor: AppArmor initialized
[ 0.035549] Yama: becoming mindful.
[ 0.036133] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.037815] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.038516] Mount-cache hash table entries: 256
[ 0.038681] Initializing cgroup subsys memory
[ 0.038686] Initializing cgroup subsys devices
[ 0.038687] Initializing cgroup subsys freezer
[ 0.038688] Initializing cgroup subsys blkio
[ 0.038690] Initializing cgroup subsys perf_event
[ 0.038692] Initializing cgroup subsys hugetlb
[ 0.038712] CPU: Physical Processor ID: 0
[ 0.038713] CPU: Processor Core ID: 0
[ 0.038718] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.038718] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.038721] mce: CPU supports 7 MCE banks
[ 0.038732] CPU0: Thermal monitoring enabled (TM1)
[ 0.038740] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.038740] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.038740] tlb_flushall_shift: 5
[ 0.038856] Freeing SMP alternatives memory: 28K (ffffffff81e6a000 - ffffffff81e71000)
[ 0.040297] ACPI: Core revision 20131115
[ 0.047844] ACPI: All ACPI Tables successfully acquired
[ 0.062464] ftrace: allocating 28257 entries in 111 pages
[ 0.076959] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.116680] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.116688] TSC deadline timer enabled
[ 0.118927] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.118935] ... version: 3
[ 0.118936] ... bit width: 48
[ 0.118937] ... generic registers: 4
[ 0.118938] ... value mask: 0000ffffffffffff
[ 0.118939] ... max period: 0000ffffffffffff
[ 0.118940] ... fixed-purpose events: 3
[ 0.118941] ... event mask: 000000070000000f
[ 0.120506] x86: Booting SMP configuration:
[ 0.133658] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120508] .... node #0, CPUs: #1 #2 #3
[ 0.160065] x86: Booted up 1 node, 4 CPUs
[ 0.160068] smpboot: Total of 4 processors activated (19155.56 BogoMIPS)
[ 0.163271] devtmpfs: initialized
[ 0.165731] EVM: security.selinux
[ 0.165732] EVM: security.SMACK64
[ 0.165733] EVM: security.ima
[ 0.165734] EVM: security.capability
[ 0.165779] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.166594] pinctrl core: initialized pinctrl subsystem
[ 0.166648] regulator-dummy: no parameters
[ 0.166679] RTC time: 12:51:08, date: 02/11/14
[ 0.166711] NET: Registered protocol family 16
[ 0.166805] cpuidle: using governor ladder
[ 0.166806] cpuidle: using governor menu
[ 0.166841] ACPI: bus type PCI registered
[ 0.166843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166902] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.166905] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.191255] PCI: Using configuration type 1 for base access
[ 0.192127] bio: create slab <bio-0> at 0
[ 0.192275] ACPI: Added _OSI(Module Device)
[ 0.192277] ACPI: Added _OSI(Processor Device)
[ 0.192279] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.192280] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.196840] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.201597] ACPI: SSDT 000000009ae19018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.202129] ACPI: Dynamic OEM Table Load:
[ 0.202132] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.204397] ACPI: SSDT 000000009ae5ba98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.204957] ACPI: Dynamic OEM Table Load:
[ 0.204959] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.208299] ACPI: SSDT 000000009ae18d98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.208825] ACPI: Dynamic OEM Table Load:
[ 0.208828] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.213091] ACPI: Interpreter enabled
[ 0.213098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.213103] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.213118] ACPI: (supports S0 S3 S4 S5)
[ 0.213120] ACPI: Using IOAPIC for interrupt routing
[ 0.213145] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.216425] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.440438] ACPI: Power Resource [FN00] (off)
[ 0.440553] ACPI: Power Resource [FN01] (off)
[ 0.440662] ACPI: Power Resource [FN02] (off)
[ 0.440768] ACPI: Power Resource [FN03] (off)
[ 0.440874] ACPI: Power Resource [FN04] (off)
[ 0.441520] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.441525] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.441641] \_SB_.PCI0:_OSC invalid UUID
[ 0.441642] _OSC request data:1 1f 0
[ 0.441646] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.442112] PCI host bridge to bus 0000:00
[ 0.442115] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.442117] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.442119] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.442121] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.442122] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.442124] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.442126] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.442128] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.442129] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.442131] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.442133] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.442134] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.442136] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.442138] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.442140] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.442141] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.442143] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.442145] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.442153] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.442240] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.442273] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.442316] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.442348] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.442359] pci 0000:00:02.0: reg 0x10: [mem 0xc1000000-0xc13fffff 64bit]
[ 0.442366] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.442371] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.442472] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.442496] pci 0000:00:14.0: reg 0x10: [mem 0xc1700000-0xc170ffff 64bit]
[ 0.442570] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.442638] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.442673] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.442698] pci 0000:00:16.0: reg 0x10: [mem 0xc1714000-0xc171400f 64bit]
[ 0.442778] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.442863] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.442886] pci 0000:00:1a.0: reg 0x10: [mem 0xc1719000-0xc17193ff]
[ 0.442980] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.443039] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.443074] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.443092] pci 0000:00:1b.0: reg 0x10: [mem 0xc1710000-0xc1713fff 64bit]
[ 0.443163] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.443212] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.443242] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.443323] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.443374] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.443404] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.443490] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.443541] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.443583] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.443606] pci 0000:00:1d.0: reg 0x10: [mem 0xc1718000-0xc17183ff]
[ 0.443699] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.443771] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.443808] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.443984] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.444005] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.444014] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.444022] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.444031] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.444040] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.444049] pci 0000:00:1f.2: reg 0x24: [mem 0xc1717000-0xc17177ff]
[ 0.444097] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.444167] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.444185] pci 0000:00:1f.3: reg 0x10: [mem 0xc1715000-0xc17150ff 64bit]
[ 0.444207] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.444348] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 0.444359] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.444368] pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc001ffff 64bit]
[ 0.444374] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.444383] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.444413] pci 0000:01:00.0: supports D1 D2
[ 0.444480] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.451509] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.451517] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.451525] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.451536] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.451674] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.451696] pci 0000:07:00.0: reg 0x10: [mem 0xc1600000-0xc160ffff]
[ 0.451853] pci 0000:07:00.0: supports D1 D2
[ 0.451854] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.451933] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[ 0.451954] pci 0000:07:00.2: reg 0x10: [io 0x2000-0x20ff]
[ 0.451990] pci 0000:07:00.2: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 0.452013] pci 0000:07:00.2: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 0.452106] pci 0000:07:00.2: supports D1 D2
[ 0.452108] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.452159] pci 0000:07:00.2: System wakeup disabled by ACPI
[ 0.459541] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.459552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.459562] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.459577] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.459698] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[ 0.459720] pci 0000:08:00.0: reg 0x10: [mem 0xc1510000-0xc151ffff]
[ 0.459863] pci 0000:08:00.0: PME# supported from D0 D3hot
[ 0.459894] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.459952] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.459973] pci 0000:08:00.1: reg 0x10: [mem 0xc1500000-0xc150ffff]
[ 0.460116] pci 0000:08:00.1: supports D1
[ 0.460118] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[ 0.475584] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.475599] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.548240] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548294] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548347] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548398] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548449] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548499] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548549] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.548599] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.549027] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.549033] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.549100] Found 1 acpi root devices
[ 0.549139] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.549231] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.549236] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.549238] vgaarb: loaded
[ 0.549239] vgaarb: bridge control possible 0000:01:00.0
[ 0.549240] vgaarb: no bridge control possible 0000:00:02.0
[ 0.549382] SCSI subsystem initialized
[ 0.549435] libata version 3.00 loaded.
[ 0.549452] ACPI: bus type USB registered
[ 0.549467] usbcore: registered new interface driver usbfs
[ 0.549474] usbcore: registered new interface driver hub
[ 0.549495] usbcore: registered new device driver usb
[ 0.549597] PCI: Using ACPI for IRQ routing
[ 0.556234] PCI: pci_cache_line_size set to 64 bytes
[ 0.556292] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.556294] e820: reserve RAM buffer [mem 0x90cc1000-0x93ffffff]
[ 0.556296] e820: reserve RAM buffer [mem 0x9a4bf000-0x9bffffff]
[ 0.556298] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.556299] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 0.556375] NetLabel: Initializing
[ 0.556376] NetLabel: domain hash size = 128
[ 0.556377] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.556390] NetLabel: unlabeled traffic allowed by default
[ 0.556442] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.556447] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.558480] Switched to clocksource hpet
[ 0.563030] AppArmor: AppArmor Filesystem Enabled
[ 0.563053] pnp: PnP ACPI init
[ 0.563065] ACPI: bus type PNP registered
[ 0.563099] pnp 00:00: [dma 4]
[ 0.563118] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.563138] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.563232] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.563263] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.563305] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.563307] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.563309] system 00:04: [io 0xffff] has been reserved
[ 0.563312] system 00:04: [io 0xffff] has been reserved
[ 0.563315] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.563317] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.563319] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.563321] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.563323] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.563346] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.563393] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.563396] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.563428] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.563455] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.634722] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.634839] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.634842] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.634844] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.634846] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.634848] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.634850] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.634852] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.634854] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.634856] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.634858] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.634860] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.634863] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.635229] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.635231] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.635234] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.635319] pnp: PnP ACPI: found 12 devices
[ 0.635321] ACPI: bus type PNP unregistered
[ 0.641451] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.641478] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref]
[ 0.641481] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.641483] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.641486] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.641489] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.641493] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.641496] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.641502] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.641507] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.641513] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.641519] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.641529] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.641531] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.641533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.641535] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.641536] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.641538] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.641540] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.641542] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.641543] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.641545] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.641547] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.641549] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.641550] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.641552] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.641554] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.641555] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.641557] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.641559] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.641561] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[ 0.641563] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.641565] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.641567] pci_bus 0000:07: resource 1 [mem 0xc1600000-0xc16fffff]
[ 0.641568] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.641570] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[ 0.641598] NET: Registered protocol family 2
[ 0.641764] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.641922] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.642053] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.642075] TCP: reno registered
[ 0.642087] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.642118] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.642193] NET: Registered protocol family 1
[ 0.642206] pci 0000:00:02.0: Boot video device
[ 1.027070] PCI: CLS 64 bytes, default 64
[ 1.027131] Trying to unpack rootfs image as initramfs...
[ 1.318929] Freeing initrd memory: 18340K (ffff880035c1e000 - ffff880036e07000)
[ 1.318934] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.318937] software IO TLB [mem 0x92cc2000-0x96cc2000] (64MB) mapped at [ffff880092cc2000-ffff880096cc1fff]
[ 1.318974] Simple Boot Flag at 0x44 set to 0x1
[ 1.319177] Scanning for low memory corruption every 60 seconds
[ 1.319463] Initialise system trusted keyring
[ 1.319506] audit: initializing netlink socket (disabled)
[ 1.319521] type=2000 audit(1392123069.300:1): initialized
[ 1.345272] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.346300] zbud: loaded
[ 1.346442] VFS: Disk quotas dquot_6.5.2
[ 1.346477] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.346851] fuse init (API version 7.22)
[ 1.346917] msgmni has been set to 11693
[ 1.346962] Key type big_key registered
[ 1.347413] Key type asymmetric registered
[ 1.347415] Asymmetric key parser 'x509' registered
[ 1.347443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.347478] io scheduler noop registered
[ 1.347481] io scheduler deadline registered (default)
[ 1.347501] io scheduler cfq registered
[ 1.347559] pcieport 0000:00:01.0: device [8086:0101] has invalid IRQ; check vendor BIOS
[ 1.347678] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.347715] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[ 1.347830] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[ 1.347953] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.347965] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.348001] efifb: probing for efifb
[ 1.348441] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90021400000, using 4160k, total 4160k
[ 1.348443] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.348444] efifb: scrolling: redraw
[ 1.348446] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.351005] Console: switching to colour frame buffer device 170x48
[ 1.353401] fb0: EFI VGA frame buffer device
[ 1.353412] intel_idle: MWAIT substates: 0x21120
[ 1.353413] intel_idle: v0.4 model 0x2A
[ 1.353414] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.353581] ACPI: AC Adapter [ACAD] (on-line)
[ 1.353662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[ 1.353666] ACPI: Power Button [PWRB]
[ 1.353706] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.353772] ACPI: Lid Switch [LID0]
[ 1.353824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.353827] ACPI: Power Button [PWRF]
[ 1.353918] ACPI: Fan [FAN0] (off)
[ 1.353978] ACPI: Fan [FAN1] (off)
[ 1.354052] ACPI: Fan [FAN2] (off)
[ 1.354116] ACPI: Fan [FAN3] (off)
[ 1.354187] ACPI: Fan [FAN4] (off)
[ 1.354250] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.354259] pci 0000:00:00.0: no hotplug settings from platform
[ 1.354260] pci 0000:00:00.0: using default PCI settings
[ 1.354266] pcieport 0000:00:01.0: no hotplug settings from platform
[ 1.354272] pci 0000:01:00.0: no hotplug settings from platform
[ 1.354274] pci 0000:00:02.0: no hotplug settings from platform
[ 1.354276] pci 0000:00:02.0: using default PCI settings
[ 1.354280] pci 0000:00:14.0: no hotplug settings from platform
[ 1.354281] pci 0000:00:14.0: using default PCI settings
[ 1.354289] pci 0000:00:16.0: no hotplug settings from platform
[ 1.354290] pci 0000:00:16.0: using default PCI settings
[ 1.354298] pci 0000:00:1a.0: no hotplug settings from platform
[ 1.354299] pci 0000:00:1a.0: using default PCI settings
[ 1.354307] pci 0000:00:1b.0: no hotplug settings from platform
[ 1.354309] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1.354320] pci 0000:07:00.0: no hotplug settings from platform
[ 1.354329] pci 0000:07:00.2: no hotplug settings from platform
[ 1.354332] pcieport 0000:00:1c.1: no hotplug settings from platform
[ 1.354342] pci 0000:08:00.0: no hotplug settings from platform
[ 1.354352] pci 0000:08:00.1: no hotplug settings from platform
[ 1.354354] pci 0000:00:1d.0: no hotplug settings from platform
[ 1.354356] pci 0000:00:1d.0: using default PCI settings
[ 1.354363] pci 0000:00:1f.0: no hotplug settings from platform
[ 1.354365] pci 0000:00:1f.0: using default PCI settings
[ 1.354373] pci 0000:00:1f.2: no hotplug settings from platform
[ 1.354375] pci 0000:00:1f.2: using default PCI settings
[ 1.354382] pci 0000:00:1f.3: no hotplug settings from platform
[ 1.354383] pci 0000:00:1f.3: using default PCI settings
[ 1.354857] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.354859] ACPI: Thermal Zone [TZ00] (73 C)
[ 1.355093] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.355095] ACPI: Thermal Zone [TZ01] (73 C)
[ 1.355147] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.355149] ACPI: Thermal Zone [TZ02] (28 C)
[ 1.355189] GHES: HEST is not enabled!
[ 1.355282] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.427232] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.427329] Linux agpgart interface v0.103
[ 1.428537] brd: module loaded
[ 1.429188] loop: module loaded
[ 1.429477] libphy: Fixed MDIO Bus: probed
[ 1.429546] tun: Universal TUN/TAP device driver, 1.6
[ 1.429548] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.429590] PPP generic driver version 2.4.2
[ 1.429627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.429631] ehci-pci: EHCI PCI platform driver
[ 1.429746] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.429751] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.429765] ehci-pci 0000:00:1a.0: debug port 2
[ 1.433660] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.433681] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1719000
[ 1.443245] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.443288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.443290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443292] usb usb1: Product: EHCI Host Controller
[ 1.443294] usb usb1: Manufacturer: Linux 3.13.0-8-generic ehci_hcd
[ 1.443296] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.443403] hub 1-0:1.0: USB hub found
[ 1.443409] hub 1-0:1.0: 2 ports detected
[ 1.443577] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.443582] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.443594] ehci-pci 0000:00:1d.0: debug port 2
[ 1.447494] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.447512] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1718000
[ 1.459259] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.459297] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.459299] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459300] usb usb2: Product: EHCI Host Controller
[ 1.459302] usb usb2: Manufacturer: Linux 3.13.0-8-generic ehci_hcd
[ 1.459303] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.459395] hub 2-0:1.0: USB hub found
[ 1.459401] hub 2-0:1.0: 2 ports detected
[ 1.459476] ehci-platform: EHCI generic platform driver
[ 1.459482] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.459483] ohci-pci: OHCI PCI platform driver
[ 1.459491] ohci-platform: OHCI generic platform driver
[ 1.459495] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.459604] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.459609] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.459703] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.459727] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 1.459790] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.459792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459793] usb usb3: Product: xHCI Host Controller
[ 1.459795] usb usb3: Manufacturer: Linux 3.13.0-8-generic xhci_hcd
[ 1.459797] usb usb3: SerialNumber: 0000:00:14.0
[ 1.459885] hub 3-0:1.0: USB hub found
[ 1.459895] hub 3-0:1.0: 4 ports detected
[ 1.460194] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.460197] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.460235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.460237] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.460239] usb usb4: Product: xHCI Host Controller
[ 1.460240] usb usb4: Manufacturer: Linux 3.13.0-8-generic xhci_hcd
[ 1.460242] usb usb4: SerialNumber: 0000:00:14.0
[ 1.460329] hub 4-0:1.0: USB hub found
[ 1.460339] hub 4-0:1.0: 4 ports detected
[ 1.467496] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.500435] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.500441] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.500696] mousedev: PS/2 mouse device common for all mice
[ 1.503351] rtc_cmos 00:05: RTC can wake from S4
[ 1.503511] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.503541] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.503599] device-mapper: uevent: version 1.0.3
[ 1.503684] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.503692] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.503694] EFI Variables Facility v0.08 2004-May-17
[ 1.518646] TCP: cubic registered
[ 1.518718] NET: Registered protocol family 10
[ 1.518863] NET: Registered protocol family 17
[ 1.518873] Key type dns_resolver registered
[ 1.519179] Loading compiled-in X.509 certificates
[ 1.520112] Loaded X.509 cert 'Magrathea: Glacier signing key: 213c1d15df47dfa20ba4ca4ede832f8c6eed9cd1'
[ 1.520128] registered taskstats version 1
[ 1.522641] Key type trusted registered
[ 1.524663] Key type encrypted registered
[ 1.526639] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.526643] IMA: No TPM chip found, activating TPM-bypass!
[ 1.527038] Magic number: 2:412:885
[ 1.527132] rtc_cmos 00:05: setting system clock to 2014-02-11 12:51:10 UTC (1392123070)
[ 1.527777] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.527779] EDD information not available.
[ 1.527819] PM: Hibernation image not present or could not be loaded.
[ 1.529148] Freeing unused kernel memory: 1328K (ffffffff81d1e000 - ffffffff81e6a000)
[ 1.529150] Write protecting the kernel read-only data: 12288k
[ 1.531290] Freeing unused kernel memory: 892K (ffff880002721000 - ffff880002800000)
[ 1.532896] Freeing unused kernel memory: 728K (ffff880002b4a000 - ffff880002c00000)
[ 1.544981] systemd-udevd[122]: starting version 204
[ 1.548853] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.567419] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 1.567459] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 1.568047] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
[ 1.568053] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 1.568082] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 1.568419] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
[ 1.568428] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 1.568459] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 1.568798] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
[ 1.568807] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 1.568827] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 1.569166] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
[ 1.569223] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.577833] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[ 1.577851] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 1.579197] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.579205] r8169 0000:07:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 1.579434] r8169 0000:07:00.2: irq 43 for MSI/MSI-X
[ 1.579598] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc9000003c000, 84:34:97:14:24:7b, XID 08800800 IRQ 43
[ 1.579600] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.584694] ahci 0000:00:1f.2: version 3.0
[ 1.584873] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.603408] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[ 1.603415] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.619946] scsi0 : ahci
[ 1.620048] scsi1 : ahci
[ 1.620132] scsi2 : ahci
[ 1.620207] scsi3 : ahci
[ 1.620283] scsi4 : ahci
[ 1.620359] scsi5 : ahci
[ 1.620402] ata1: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717100 irq 44
[ 1.620405] ata2: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717180 irq 44
[ 1.620408] ata3: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717200 irq 44
[ 1.620409] ata4: DUMMY
[ 1.620410] ata5: DUMMY
[ 1.620411] ata6: DUMMY
[ 1.759681] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.892287] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.892302] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.892676] hub 1-1:1.0: USB hub found
[ 1.892747] hub 1-1:1.0: 6 ports detected
[ 1.939774] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.941823] ata3.00: ATAPI: hp DVD RAM UJ8C2, 1.00, max UDMA/133
[ 1.945381] ata3.00: configured for UDMA/133
[ 1.947772] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.947822] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.949495] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 1.949505] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.951315] ata1.00: configured for UDMA/100
[ 1.951633] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 1.951793] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.951797] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.951817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.951851] sd 0:0:0:0: [sda] Write Protect is off
[ 1.951856] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.951889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.953471] scsi 2:0:0:0: CD-ROM hp DVD RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 1.957869] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.957888] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.958037] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.958119] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.994355] sda: sda1 sda2 sda3 sda4
[ 1.994874] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.003739] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.136195] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.136198] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.136511] hub 2-1:1.0: USB hub found
[ 2.136590] hub 2-1:1.0: 8 ports detected
[ 2.304155] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 2.315996] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[ 2.323754] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[ 2.323757] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.323759] usb 3-2: Product: USB Optical Mouse
[ 2.323761] usb 3-2: Manufacturer: PixArt
[ 2.323873] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.327350] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.330929] usbcore: registered new interface driver usbhid
[ 2.330932] usbhid: USB HID core driver
[ 2.332406] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input5
[ 2.332554] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 2.436262] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[ 2.454281] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[ 2.454284] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.454286] usb 3-4: SerialNumber: 47163a54f0d0
[ 2.524272] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.539912] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.674010] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[ 2.674021] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.674028] usb 1-1.1: Product: HP Truevision HD
[ 2.674034] usb 1-1.1: Manufacturer: SuYin
[ 2.674039] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[ 3.317158] Switched to clocksource tsc
[ 3.499867] random: init urandom read with 126 bits of entropy available
[ 3.577894] random: nonblocking pool is initialized
[ 5.137863] Adding 17577980k swap on /dev/sda3. Priority:-1 extents:1 across:17577980k FS
[ 6.213427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.425550] systemd-udevd[319]: starting version 204
[ 7.207414] lp: driver loaded but no devices found
[ 8.922500] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 8.948618] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 8.948627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.948632] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[ 8.948637] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[ 8.948642] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[ 8.948646] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.948648] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[ 8.948653] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[ 8.948658] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[ 8.948662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.948664] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.056237] hp_accel: laptop model unknown, using default axes configuration
[ 9.056504] lis3lv02d: unknown sensor type 0x0
[ 9.056546] hp_accel: probe of HPQ0004:00 failed with error -22
[ 9.090871] wmi: Mapper loaded
[ 9.199313] [drm] Initialized drm 1.1.0 20060810
[ 9.449273] [drm] Memory usable by graphics device = 2048M
[ 9.449277] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 9.449279] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 9.449294] Console: switching to colour dummy device 80x25
[ 9.502131] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 9.502141] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.502142] [drm] Driver supports precise vblank timestamp query.
[ 9.502232] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 9.529375] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 9.529378] [drm] This can cause pipe underruns and display issues.
[ 9.529379] [drm] Please upgrade your BIOS to fix this.
[ 9.544045] fbcon: inteldrmfb (fb0) is primary device
[ 9.627080] [drm] radeon kernel modesetting enabled.
[ 9.627093] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 9.702328] cfg80211: Calling CRDA to update world regulatory domain
[ 10.160300] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.218761] Console: switching to colour frame buffer device 170x48
[ 10.222391] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.222393] i915 0000:00:02.0: registered panic notifier
[ 10.222570] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 10.222741] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 10.243468] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 10.244202] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff8801d432a360 (20131115/exresop-422)
[ 10.244209] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[ 10.244215] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60fc7d0), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[ 10.244222] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCM] (Node ffff8801d6142c08), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[ 10.244230] ACPI Error: Evaluating _BCM failed (20131115/video-374)
[ 10.244301] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input7
[ 10.244372] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 10.245332] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.245809] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff8801d432a510 (20131115/exresop-422)
[ 10.245814] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[ 10.245818] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60fc7d0), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[ 10.245823] ACPI Error: Evaluating _BCM failed (20131115/video-374)
[ 10.245888] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input8
[ 10.245959] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.246188] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.247003] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x18A5).
[ 10.247033] [drm] register mmio base: 0xC0000000
[ 10.247035] [drm] register mmio size: 131072
[ 10.247037] vga_switcheroo: enabled
[ 10.247147] ATPX version 1
[ 10.305285] mute LED gpio 8 polarity 1
[ 10.305478] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 10.305481] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.305483] hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 10.305485] mono: mono_out=0x0
[ 10.305486] inputs:
[ 10.305489] Internal Mic=0x11
[ 10.305491] Mic=0xa
[ 10.399027] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 10.402714] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 10.415972] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.416062] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.416137] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.529758] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.805801] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[ 10.827577] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 10.939688] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 11.090074] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.341993] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.504165] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 11.507674] cfg80211: World regulatory domain updated:
[ 11.507679] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.507682] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.507685] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.507687] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.507689] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.507691] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.620590] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.752281] type=1400 audit(1392123080.715:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
[ 11.752288] type=1400 audit(1392123080.715:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
[ 11.752292] type=1400 audit(1392123080.715:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
[ 11.752463] type=1400 audit(1392123080.715:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
[ 11.752472] type=1400 audit(1392123080.715:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
[ 11.752478] type=1400 audit(1392123080.715:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
[ 11.752486] type=1400 audit(1392123080.715:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=417 comm="apparmor_parser"
[ 11.752494] type=1400 audit(1392123080.715:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=417 comm="apparmor_parser"
[ 11.752500] type=1400 audit(1392123080.715:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=417 comm="apparmor_parser"
[ 11.752680] type=1400 audit(1392123080.715:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
[ 11.873141] ATOM BIOS: HP/Compal
[ 11.873195] [drm] GPU not posted. posting now...
[ 11.876054] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 11.876057] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 11.876059] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 11.876060] [drm] RAM width 128bits DDR
[ 11.876151] [TTM] Zone kernel: Available graphics memory: 2994984 kiB
[ 11.876153] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 11.876155] [TTM] Initializing pool allocator
[ 11.876158] [TTM] Initializing DMA pool allocator
[ 11.876178] [drm] radeon: 2048M of VRAM memory ready
[ 11.876179] [drm] radeon: 1024M of GTT memory ready.
[ 12.323111] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 12.323981] [drm] PCIE gen 2 link speeds already enabled
[ 12.325141] [drm] Loading TURKS Microcode
[ 12.363619] Linux video capture interface: v2.00
[ 12.661130] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[ 12.669646] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
[ 12.669732] usbcore: registered new interface driver uvcvideo
[ 12.669735] USB Video Class driver (1.1.1)
[ 12.756275] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 12.756387] radeon 0000:01:00.0: WB enabled
[ 12.756391] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8801d2603c00
[ 12.756393] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8801d2603c0c
[ 12.756944] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900215b2118
[ 12.756946] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.756947] [drm] Driver supports precise vblank timestamp query.
[ 12.756969] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 12.756981] radeon 0000:01:00.0: radeon: using MSI.
[ 12.757015] [drm] radeon: irq initialized.
[ 12.773421] [drm] ring test on 0 succeeded in 1 usecs
[ 12.773480] [drm] ring test on 3 succeeded in 1 usecs
[ 12.959254] [drm] ring test on 5 succeeded in 1 usecs
[ 12.959263] [drm] UVD initialized successfully.
[ 12.959549] [drm] Enabling audio 0 support
[ 12.959602] [drm] ib test on ring 0 succeeded in 0 usecs
[ 12.959652] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.110345] [drm] ib test on ring 5 succeeded
[ 13.110756] [drm] Radeon Display Connectors
[ 13.117380] [drm] Internal thermal controller with fan control
[ 13.118216] [drm] radeon: power management initialized
[ 13.118373] radeon 0000:01:00.0: No connectors reported connected with modes
[ 13.118375] [drm] Cannot find any crtc or sizes - going 1024x768
[ 13.119252] [drm] fb mappable at 0xA0474000
[ 13.119253] [drm] vram apper at 0xA0000000
[ 13.119254] [drm] size 3145728
[ 13.119255] [drm] fb depth is 24
[ 13.119256] [drm] pitch is 4096
[ 13.119310] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 13.119329] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 1
[ 13.412941] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 14.145461] init: failsafe main process (764) killed by TERM signal
[ 18.858092] [drm] Disabling audio 0 support
[ 19.652296] Bluetooth: Core ver 2.17
[ 19.652319] NET: Registered protocol family 31
[ 19.652321] Bluetooth: HCI device and connection manager initialized
[ 19.652330] Bluetooth: HCI socket layer initialized
[ 19.652334] Bluetooth: L2CAP socket layer initialized
[ 19.652337] Bluetooth: SCO socket layer initialized
[ 19.873840] Bluetooth: RFCOMM TTY layer initialized
[ 19.873853] Bluetooth: RFCOMM socket layer initialized
[ 19.873859] Bluetooth: RFCOMM ver 1.11
[ 20.131744] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.131748] Bluetooth: BNEP filters: protocol multicast
[ 20.131756] Bluetooth: BNEP socket layer initialized
[ 21.321468] init: avahi-cups-reload main process (1249) terminated with status 1
[ 21.559452] ppdev: user-space parallel port driver
[ 21.592683] audit_printk_skb: 132 callbacks suppressed
[ 21.592686] type=1400 audit(1392123090.547:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1274 comm="apparmor_parser"
[ 21.592694] type=1400 audit(1392123090.547:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1274 comm="apparmor_parser"
[ 21.593093] type=1400 audit(1392123090.547:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1274 comm="apparmor_parser"
[ 27.544363] r8169 0000:07:00.2 eth0: link down
[ 27.544409] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.544740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.546144] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 27.586038] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 27.633782] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.634103] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.494742] init: samba-ad-dc main process (1264) terminated with status 1
[ 28.997673] Non-volatile memory driver v1.3
[ 29.148563] thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
[ 29.148800] thinkpad_ec: no ThinkPad embedded controller!
[ 29.421205] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 29.521264] thinkpad_ec: no ThinkPad embedded controller!
[ 30.194842] [drm] PCIE gen 2 link speeds already enabled
[ 30.198272] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 30.198360] radeon 0000:01:00.0: WB enabled
[ 30.198363] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8801d2603c00
[ 30.198366] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8801d2603c0c
[ 30.198917] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900215b2118
[ 30.215122] [drm] ring test on 0 succeeded in 1 usecs
[ 30.215181] [drm] ring test on 3 succeeded in 1 usecs
[ 30.410856] [drm] ring test on 5 succeeded in 1 usecs
[ 30.410860] [drm] UVD initialized successfully.
[ 30.410862] [drm] Enabling audio 0 support
[ 30.410911] [drm] ib test on ring 0 succeeded in 0 usecs
[ 30.410963] [drm] ib test on ring 3 succeeded in 1 usecs
[ 30.561657] [drm] ib test on ring 5 succeeded
[ 30.641588] wlan0: authenticate with 00:24:d4:d4:78:b4
[ 30.648322] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[ 30.649802] wlan0: authenticated
[ 30.652148] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[ 30.654575] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=1)
[ 30.654794] wlan0: associated
[ 30.654817] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.588799] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ Modéré ]
Hors ligne
#2 Le 12/02/2014, à 09:20
- Fireweasel
Re : Mon démarrage sous Trusty est trrrès lent et le vôtre ?
Tu utilises quoi comme commande pour avoir le détail du timming au démarrage ? les 35.588799 c'est pour ~35 secondes c'est bien ça ?
Dernière modification par Fireweasel (Le 12/02/2014, à 09:21)
Hors ligne
#3 Le 12/02/2014, à 09:30
- nam1962
Re : Mon démarrage sous Trusty est trrrès lent et le vôtre ?
dmesg
oui !
[ Modéré ]
Hors ligne
#4 Le 12/02/2014, à 09:49
- Fireweasel
Re : Mon démarrage sous Trusty est trrrès lent et le vôtre ?
Là je suis sur mon pc de travail qui est pas très performant avec un vieux disque dur et avec Kubuntu 13.10 et je trouve 18 secondes en temps.
Par contre sur mon pc chez moi ça doit carburer car j'ai un SSD et le démarrage est quasi-instantané.
Hors ligne
#5 Le 12/02/2014, à 12:08
- nam1962
Re : Mon démarrage sous Trusty est trrrès lent et le vôtre ?
Je suis en Trusty Ma precise démarre bien plus vite !
[ Modéré ]
Hors ligne