Pages : 1
#1 Le 13/05/2008, à 15:22
- Dr4gOoN
USB WIFI DWA-110 sur Gutsy
J'ai lu différents posts et tutoriaux, mais cette fois-ci, une variable change : Je n'ai PAS acces au net, et pour tout ce qui est paquet à installer, les dependances sont souvent enorme, donc me complique bcp la tache
Le souci, comment installer ma clé USB wifi D-Link DWA-110 ???
Voici quelques resultat de commande :
# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d2afe00 (usable)
[ 0.000000] BIOS-e820: 000000007d2afe00 - 000000007d2b1ea0 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d2b1ea0 - 000000007e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[ 0.000000] 1106MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f9bf0
[ 0.000000] Entering add_active_range(0, 0, 512687) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 512687
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 512687
[ 0.000000] On node 0 totalpages: 512687
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2213 pages used for memmap
[ 0.000000] HighMem zone: 281098 pages, LIFO batch:31
[ 0.000000] DMI 2.5 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E5C10 checksum 0
[ 0.000000] ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ)
[ 0.000000] ACPI: RSDT 7D2C1E40, 0044 (r1 HPQOEM SLIC-BPC 20070718 0)
[ 0.000000] ACPI: FACP 7D2C1EE8, 0074 (r1 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: DSDT 7D2C2427, A370 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E)
[ 0.000000] ACPI: FACS 7D2C1E00, 0040
[ 0.000000] ACPI: APIC 7D2C1F5C, 0084 (r1 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: ASF! 7D2C1FE0, 0063 (r32 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: MCFG 7D2C2043, 003C (r1 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: TCPA 7D2C207F, 0032 (r1 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: SLIC 7D2C20B1, 0176 (r1 HPQOEM SLIC-BPC 1 0)
[ 0.000000] ACPI: HPET 7D2C2227, 0038 (r1 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: DMAR 7D2C225F, 0198 (r1 COMPAQ BEARLAKE 1 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:76000000)
[ 0.000000] Built 1 zonelists. Total pages: 508682
[ 0.000000] Kernel command line: root=UUID=ea0006b2-8b3c-46bb-9d8d-275114c641f0 ro quiet splash locale=fr_FR
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2327.586 MHz processor.
[ 20.580495] Console: colour VGA+ 80x25
[ 20.580677] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.580880] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.640556] Memory: 2021460k/2050748k available (2015k kernel code, 28124k reserved, 916k data, 364k init, 1133244k highmem)
[ 20.640563] virtual kernel memory layout:
[ 20.640564] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 20.640565] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.640565] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.640566] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.640567] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 20.640568] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 20.640569] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 20.640571] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.640598] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 20.640704] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 20.640707] hpet0: 4 64-bit timers, 14318180 Hz
[ 20.721544] Calibrating delay using timer specific routine.. 4658.19 BogoMIPS (lpj=9316396)
[ 20.721561] Security Framework v1.0.0 initialized
[ 20.721566] SELinux: Disabled at boot.
[ 20.721575] Mount-cache hash table entries: 512
[ 20.721669] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001
[ 20.721674] monitor/mwait feature present.
[ 20.721676] using mwait in idle threads.
[ 20.721680] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 20.721681] CPU: L2 cache: 4096K
[ 20.721683] CPU: Physical Processor ID: 0
[ 20.721684] CPU: Processor Core ID: 0
[ 20.721686] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001
[ 20.721692] Compat vDSO mapped to ffffe000.
[ 20.721702] Checking 'hlt' instruction... OK.
[ 20.737592] SMP alternatives: switching to UP code
[ 20.737914] Early unpacking initramfs... done
[ 20.980332] ACPI: Core revision 20070126
[ 20.980377] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.984944] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b
[ 20.984956] SMP alternatives: switching to SMP code
[ 20.985014] Booting processor 1/1 eip 3000
[ 20.995299] Initializing CPU#1
[ 21.072772] Calibrating delay using timer specific routine.. 4654.99 BogoMIPS (lpj=9309994)
[ 21.072777] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001
[ 21.072780] monitor/mwait feature present.
[ 21.072782] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.072784] CPU: L2 cache: 4096K
[ 21.072785] CPU: Physical Processor ID: 0
[ 21.072786] CPU: Processor Core ID: 1
[ 21.072787] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001
[ 21.073441] CPU1: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b
[ 21.073457] Total of 2 processors activated (9313.19 BogoMIPS).
[ 21.073593] ENABLING IO-APIC IRQs
[ 21.073753] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.220515] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 21.240482] Brought up 2 CPUs
[ 21.338299] migration_cost=9
[ 21.338393] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 21.338395] Booting paravirtualized kernel on bare hardware
[ 21.338443] Time: 13:32:16 Date: 04/13/108
[ 21.338458] NET: Registered protocol family 16
[ 21.338516] EISA bus registered
[ 21.338519] ACPI: bus type pci registered
[ 21.339309] PCI: PCI BIOS revision 3.00 entry at 0xe96d4, last bus=48
[ 21.339310] PCI: Using configuration type 1
[ 21.339311] Setting up standard PCI resources
[ 21.340811] ACPI: EC: Look up EC in DSDT
[ 21.342987] ACPI: Interpreter enabled
[ 21.342990] ACPI: (supports S0 S3 S4 S5)
[ 21.343002] ACPI: Using IOAPIC for interrupt routing
[ 21.347476] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.347487] PCI: Probing PCI hardware (bus 00)
[ 21.348395] PCI: Transparent bridge - 0000:00:1e.0
[ 21.348430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.348675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 21.348766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[ 21.348857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 21.371214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 21.371285] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 21.371353] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 21.371422] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 21.371490] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 21.371558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 21.371625] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 21.371693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 21.371782] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.371788] pnp: PnP ACPI init
[ 21.371793] ACPI: bus type pnp registered
[ 21.374144] pnp: PnP ACPI: found 17 devices
[ 21.374145] ACPI: ACPI bus type pnp unregistered
[ 21.374148] PnPBIOS: Disabled by ACPI PNP
[ 21.374177] PCI: Using ACPI for IRQ routing
[ 21.374178] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.897850] NET: Registered protocol family 8
[ 21.897852] NET: Registered protocol family 20
[ 21.897891] pnp: 00:0e: ioport range 0x400-0x41f has been reserved
[ 21.897893] pnp: 00:0e: ioport range 0x420-0x43f has been reserved
[ 21.897895] pnp: 00:0e: ioport range 0x440-0x45f has been reserved
[ 21.897897] pnp: 00:0e: ioport range 0x460-0x47f has been reserved
[ 21.897898] pnp: 00:0e: ioport range 0x480-0x48f has been reserved
[ 21.897901] pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved
[ 21.897903] pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
[ 21.897904] pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved
[ 21.897908] pnp: 00:0f: ioport range 0x4d0-0x4d1 has been reserved
[ 21.897911] pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 21.897914] pnp: 00:10: iomem range 0x100000-0x7dffffff could not be reserved
[ 21.897916] pnp: 00:10: iomem range 0xe4000-0xfffff could not be reserved
[ 21.897918] pnp: 00:10: iomem range 0xfec01000-0xfecfffff could not be reserved
[ 21.898967] Time: tsc clocksource has been installed.
[ 21.898973] Switched to high resolution mode on CPU 0
[ 21.899036] Switched to high resolution mode on CPU 1
[ 21.928048] PCI: Bridge: 0000:00:1c.0
[ 21.928049] IO window: disabled.
[ 21.928052] MEM window: disabled.
[ 21.928055] PREFETCH window: disabled.
[ 21.928058] PCI: Bridge: 0000:00:1c.1
[ 21.928059] IO window: disabled.
[ 21.928063] MEM window: disabled.
[ 21.928065] PREFETCH window: disabled.
[ 21.928068] PCI: Bridge: 0000:00:1e.0
[ 21.928069] IO window: disabled.
[ 21.928073] MEM window: disabled.
[ 21.928075] PREFETCH window: disabled.
[ 21.928092] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 21.928108] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 16
[ 21.928112] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 21.928119] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 21.928126] NET: Registered protocol family 2
[ 21.974789] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.974824] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 21.975297] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 21.975457] TCP: Hash tables configured (established 131072 bind 65536)
[ 21.975459] TCP reno registered
[ 21.990837] checking if image is initramfs... it is
[ 22.469332] Freeing initrd memory: 7352k freed
[ 22.469744] audit: initializing netlink socket (disabled)
[ 22.469757] audit(1210685536.260:1): initialized
[ 22.469820] highmem bounce pool size: 64 pages
[ 22.471104] VFS: Disk quotas dquot_6.5.1
[ 22.471136] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.471198] io scheduler noop registered
[ 22.471199] io scheduler anticipatory registered
[ 22.471200] io scheduler deadline registered
[ 22.471210] io scheduler cfq registered (default)
[ 22.471223] Boot video device is 0000:00:02.0
[ 22.471362] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 22.471393] assign_interrupt_mode Found MSI capability
[ 22.471395] Allocate Port Service[0000:00:1c.0:pcie00]
[ 22.471419] Allocate Port Service[0000:00:1c.0:pcie02]
[ 22.471476] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 22.471507] assign_interrupt_mode Found MSI capability
[ 22.471509] Allocate Port Service[0000:00:1c.1:pcie00]
[ 22.471529] Allocate Port Service[0000:00:1c.1:pcie02]
[ 22.471630] isapnp: Scanning for PnP cards...
[ 22.823693] isapnp: No Plug & Play device found
[ 22.837168] Real Time Clock Driver v1.12ac
[ 22.837297] hpet_resources: 0xfed00000 is busy
[ 22.837327] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.837416] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.837859] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.837991] ACPI: PCI Interrupt 0000:00:03.3[b] -> GSI 17 (level, low) -> IRQ 17
[ 22.838046] 0000:00:03.3: ttyS1 at I/O 0x1248 (irq = 17) is a 16550A
[ 22.838429] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.838557] input: Macintosh mouse button emulation as /class/input/input0
[ 22.838616] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 22.841275] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.841280] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.841384] mice: PS/2 mouse device common for all mice
[ 22.841452] EISA: Probing bus 0 at eisa.0
[ 22.841477] EISA: Detected 0 cards.
[ 22.841532] TCP cubic registered
[ 22.841541] NET: Registered protocol family 1
[ 22.841554] Using IPI No-Shortcut mode
[ 22.841883] Magic number: 8:824:533
[ 22.842047] Freeing unused kernel memory: 364k freed
[ 23.988884] AppArmor: AppArmor initialized<5>audit(1210685537.760:2): type=1505 info="AppArmor initialized" pid=1230
[ 23.992895] fuse init (API version 7.8)
[ 23.996567] Failure registering capabilities with primary security module.
[ 24.031923] ACPI: SSDT 7D2CD42B, 03AC (r1 COMPAQ CPU_TM2 1 MSFT 100000E)
[ 24.032097] ACPI: SSDT 7D2CD2AF, 017C (r1 COMPAQ CST 1 MSFT 100000E)
[ 24.032241] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 24.032244] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 24.032400] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 24.032403] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 24.032410] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 24.032417] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 2.904000] Marking TSC unstable due to: possible TSC halt in C2.
[ 2.908000] Time: hpet clocksource has been installed.
[ 3.180000] SCSI subsystem initialized
[ 3.184000] libata version 2.21 loaded.
[ 3.228000] usbcore: registered new interface driver usbfs
[ 3.228000] usbcore: registered new interface driver hub
[ 3.228000] usbcore: registered new device driver usb
[ 3.228000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
[ 3.228000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.228000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.228000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.228000] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.228000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.228000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf01a6000
[ 3.232000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.232000] usb usb1: configuration #1 chosen from 1 choice
[ 3.232000] hub 1-0:1.0: USB hub found
[ 3.232000] hub 1-0:1.0: 4 ports detected
[ 3.236000] USB Universal Host Controller Interface driver v3.0
[ 3.284000] FDC 0 is a post-1991 82077
[ 3.336000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.336000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.336000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.336000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 3.336000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001120
[ 3.336000] usb usb2: configuration #1 chosen from 1 choice
[ 3.336000] hub 2-0:1.0: USB hub found
[ 3.336000] hub 2-0:1.0: 2 ports detected
[ 3.440000] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 16
[ 3.440000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.440000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.440000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 3.440000] uhci_hcd 0000:00:1a.1: irq 16, io base 0x00001140
[ 3.440000] usb usb3: configuration #1 chosen from 1 choice
[ 3.440000] hub 3-0:1.0: USB hub found
[ 3.440000] hub 3-0:1.0: 2 ports detected
[ 3.560000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.560000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.560000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.560000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.560000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001160
[ 3.560000] usb usb4: configuration #1 chosen from 1 choice
[ 3.560000] hub 4-0:1.0: USB hub found
[ 3.560000] hub 4-0:1.0: 2 ports detected
[ 3.584000] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.664000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 21 (level, low) -> IRQ 16
[ 3.664000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.664000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.664000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.664000] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00001180
[ 3.664000] usb usb5: configuration #1 chosen from 1 choice
[ 3.664000] hub 5-0:1.0: USB hub found
[ 3.664000] hub 5-0:1.0: 2 ports detected
[ 3.732000] usb 1-2: configuration #1 chosen from 1 choice
[ 3.768000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 18
[ 3.768000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.768000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.768000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.768000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000011a0
[ 3.768000] usb usb6: configuration #1 chosen from 1 choice
[ 3.768000] hub 6-0:1.0: USB hub found
[ 3.768000] hub 6-0:1.0: 2 ports detected
[ 3.872000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.872000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.872000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.872000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.872000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.872000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.872000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf01a6400
[ 3.876000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.876000] usb usb7: configuration #1 chosen from 1 choice
[ 3.876000] hub 7-0:1.0: USB hub found
[ 3.876000] hub 7-0:1.0: 6 ports detected
[ 3.980000] ata_piix 0000:00:1f.2: version 2.11
[ 3.980000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.980000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 18 (level, low) -> IRQ 20
[ 3.980000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.980000] scsi0 : ata_piix
[ 3.980000] scsi1 : ata_piix
[ 3.980000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000111f0 irq 14
[ 3.980000] ata2: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000111f8 irq 15
[ 4.144000] ata1.00: ATA-7: ST380815AS, 3.CHF, max UDMA/100
[ 4.144000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.160000] ata1.00: configured for UDMA/100
[ 4.524000] usb 7-3: new high speed USB device using ehci_hcd and address 2
[ 4.636000] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, HA03, max UDMA/100
[ 4.808000] ata2.00: configured for UDMA/100
[ 4.808000] scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.CH PQ: 0 ANSI: 5
[ 4.808000] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L HA03 PQ: 0 ANSI: 5
[ 4.808000] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 4.816000] usb 7-3: configuration #1 chosen from 1 choice
[ 4.964000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 18 (level, low) -> IRQ 20
[ 4.964000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 4.964000] scsi2 : ata_piix
[ 4.964000] scsi3 : ata_piix
[ 4.964000] ata3: SATA max UDMA/133 cmd 0x00011260 ctl 0x00011282 bmdma 0x00011210 irq 20
[ 4.964000] ata4: SATA max UDMA/133 cmd 0x00011268 ctl 0x00011286 bmdma 0x00011218 irq 20
[ 5.184000] usbcore: registered new interface driver libusual
[ 5.188000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 5.188000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.188000] Initializing USB Mass Storage driver...
[ 5.188000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 5.188000] usb-storage: device found at 2
[ 5.188000] usb-storage: waiting for device to settle before scanning
[ 5.300000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.300000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.300000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.300000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.300000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.300000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.300000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.300000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.300000] sda: sda1 sda2 sda3
[ 5.316000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.320000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.320000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.332000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.332000] Uniform CD-ROM driver Revision: 3.20
[ 5.332000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.424000] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 5.492000] Attempting manual resume
[ 5.492000] swsusp: Resume From Partition 8:1
[ 5.492000] PM: Checking swsusp image.
[ 5.492000] PM: Resume from disk failed.
[ 5.516000] kjournald starting. Commit interval 5 seconds
[ 5.516000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.600000] usb 5-2: configuration #1 chosen from 1 choice
[ 5.844000] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 6.024000] usb 6-1: configuration #1 chosen from 1 choice
[ 6.028000] usbcore: registered new interface driver usb-storage
[ 6.028000] USB Mass Storage support registered.
[ 10.188000] usb-storage: device scan complete
[ 10.192000] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 10.700000] Linux agpgart interface v0.102 (c) Dave Jones
[ 10.728000] heci: Intel(R) AMT Management Interface - version 3.1.0.31
[ 10.728000] heci: Copyright (c) 2003 - 2007 Intel Corporation.
[ 10.728000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 10.728000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 10.732000] heci: link layer has been established.
[ 10.748000] Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
[ 10.748000] Copyright (c) 1999-2007 Intel Corporation.
[ 10.760000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.824000] tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
[ 10.824000] tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 10.836000] heci: heci driver initialization successful.
[ 10.836000] ACPI: PCI Interrupt 0000:00:19.0[b] -> GSI 19 (level, low) -> IRQ 22
[ 10.836000] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 10.860000] parport_pc 00:07: reported by Plug and Play ACPI
[ 10.860000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.884000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0f:fe:8f:24:32
[ 10.900000] input: PC Speaker as /class/input/input1
[ 10.956000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 10.956000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.956000] agpgart: Detected an Intel Q35 Chipset.
[ 10.956000] agpgart: Detected 6140K stolen memory.
[ 10.968000] agpgart: AGP aperture is 256M @ 0xe0000000
[ 10.980000] usbcore: registered new interface driver hiddev
[ 10.996000] input: CHICONY HP Basic USB Keyboard as /class/input/input2
[ 10.996000] input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-2
[ 11.008000] input: Logitech Logitech USB Optical Mouse as /class/input/input3
[ 11.008000] input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.2-1
[ 11.008000] usbcore: registered new interface driver usbhid
[ 11.008000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 11.060000] rt73: module license 'unspecified' taints kernel.
[ 11.060000] Symbol usb_register_driver is being used by a non-GPL module, which will not be allowed in the future
[ 11.060000] Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
[ 11.060000] Symbol usb_deregister is being used by a non-GPL module, which will not be allowed in the future
[ 11.060000] Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
[ 11.060000] rt73: Unknown symbol rt73_get_wireless_stats
[ 11.164000] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 11.172000] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 11.176000] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 11.176000] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 11.176000] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 11.180000] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 11.180000] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 11.180000] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 11.180000] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 11.180000] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 11.180000] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 11.296000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 16
[ 11.296000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.700000] lp0: using parport0 (interrupt-driven).
[ 11.736000] Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k
[ 11.960000] EXT3 FS on sda3, internal journal
[ 12.484000] kjournald starting. Commit interval 5 seconds
[ 12.484000] EXT3 FS on sda2, internal journal
[ 12.484000] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.992000] No dock devices found.
[ 13.004000] input: Power Button (FF) as /class/input/input4
[ 13.004000] ACPI: Power Button (FF) [PWRF]
[ 13.024000] input: Power Button (CM) as /class/input/input5
[ 13.024000] ACPI: Power Button (CM) [PBTN]
[ 13.164000] ACPI Exception (video-1479): AE_NOT_FOUND, Evaluating _DOD [20070126]
[ 13.164000] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 13.996000] ppdev: user-space parallel port driver
[ 14.144000] audit(1210685549.281:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4946 profile="/usr/sbin/cupsd"
[ 14.168000] apm: BIOS not found.
[ 14.328000] Failure registering capabilities with primary security module.
[ 14.476000] Bluetooth: Core ver 2.11
[ 14.476000] NET: Registered protocol family 31
[ 14.476000] Bluetooth: HCI device and connection manager initialized
[ 14.476000] Bluetooth: HCI socket layer initialized
[ 14.480000] Bluetooth: L2CAP ver 2.8
[ 14.480000] Bluetooth: L2CAP socket layer initialized
[ 14.524000] Bluetooth: RFCOMM socket layer initialized
[ 14.524000] Bluetooth: RFCOMM TTY layer initialized
[ 14.524000] Bluetooth: RFCOMM ver 1.8
[ 17.136000] [drm] Initialized drm 1.1.0 20060810
[ 17.140000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 17.140000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 17.140000] set status page addr 0x00033000
[ 1444.024000] usb 7-3: USB disconnect, address 2
[ 1449.308000] usb 7-3: new high speed USB device using ehci_hcd and address 5
[ 1449.448000] usb 7-3: configuration #1 chosen from 1 choice
[ 1449.452000] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1449.452000] usb-storage: device found at 5
[ 1449.452000] usb-storage: waiting for device to settle before scanning
[ 1454.452000] usb-storage: device scan complete
[ 1454.452000] scsi 5:0:0:0: Direct-Access Samsung Mighty Drive PMAP PQ: 0 ANSI: 0 CCS
[ 1454.864000] usb 7-3: USB disconnect, address 5
[ 1454.864000] sd 5:0:0:0: [sdf] READ CAPACITY failed
[ 1454.864000] sd 5:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 1454.864000] sd 5:0:0:0: [sdf] Sense not available.
[ 1454.864000] sd 5:0:0:0: [sdf] Write Protect is off
[ 1454.864000] sd 5:0:0:0: [sdf] Mode Sense: 00 00 00 00
[ 1454.864000] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 1454.864000] sd 5:0:0:0: [sdf] Attached SCSI removable disk
[ 1454.864000] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 1794.688000] usb 7-3: new high speed USB device using ehci_hcd and address 6
[ 1794.828000] usb 7-3: configuration #1 chosen from 1 choice
[ 1794.832000] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1794.832000] usb-storage: device found at 6
[ 1794.832000] usb-storage: waiting for device to settle before scanning
[ 1799.832000] usb-storage: device scan complete
[ 1799.832000] scsi 6:0:0:0: Direct-Access Samsung Mighty Drive PMAP PQ: 0 ANSI: 0 CCS
[ 1800.120000] sd 6:0:0:0: [sdf] 249856 512-byte hardware sectors (128 MB)
[ 1800.120000] sd 6:0:0:0: [sdf] Write Protect is off
[ 1800.120000] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 1800.120000] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 1800.120000] sd 6:0:0:0: [sdf] 249856 512-byte hardware sectors (128 MB)
[ 1800.120000] sd 6:0:0:0: [sdf] Write Protect is off
[ 1800.120000] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 1800.120000] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 1800.120000] sdf: sdf1
[ 1800.124000] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[ 1800.124000] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 2054.344000] usb 7-3: USB disconnect, address 6
[ 2061.356000] usb 7-3: new high speed USB device using ehci_hcd and address 7
[ 2061.648000] usb 7-3: configuration #1 chosen from 1 choice
[ 2061.684000] Symbol usb_register_driver is being used by a non-GPL module, which will not be allowed in the future
[ 2061.684000] Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
[ 2061.684000] Symbol usb_deregister is being used by a non-GPL module, which will not be allowed in the future
[ 2061.684000] Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
[ 2061.684000] rt73: Unknown symbol rt73_get_wireless_stats# iwconfig
(no wireless extensions)# iwlist scan
(Interface doesn't support scanning.)# lshw -C network
*-network
description: Ethernet interface
product: 82566DM-2 Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: eth0
version: 02
serial: 00:0f:fe:8f:24:32
capacity: 1GB/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000-ich9 driverversion=7.6.5-NAPI firmware=1.3-1 latency=0 link=no module=e1000_ich9 multicast=yes port=twisted pair# lsusb -vv
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0111
bcdDevice 11.22
iManufacturer 1 Generic
iProduct 2 USB2.0-CRW
iSerial 3 20021111153705700
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 CARD READER
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 5 Bulk-In, Bulk-Out, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 007 Device 007: ID 07d1:3c07 D-Link System
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07d1 D-Link System
idProduct 0x3c07
bcdDevice 0.01
iManufacturer 1 Ralink
iProduct 2 802.11 bg WLAN
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 007 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 002: ID 046d:c018 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc018
bcdDevice 43.00
iManufacturer 1 Logitech
iProduct 2 Logitech USB Optical Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 006 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 002: ID 03f0:0024 Hewlett-Packard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x03f0 Hewlett-Packard
idProduct 0x0024
bcdDevice 3.00
iManufacturer 1 CHICONY
iProduct 2 HP Basic USB Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup EnabledMerci d'avance !
Hors ligne
#2 Le 13/05/2008, à 16:14
- awala
Re : USB WIFI DWA-110 sur Gutsy
bonjour
la solution est ici : http://forum.ubuntu-fr.org/viewtopic.php?id=165734
awala
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
Pages : 1