Ubuntu-fr

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

rosa@Karl:~$ lsmod | grep 8139
8139too                36864  0 
mii                    16384  1 8139too
rosa@Karl:~$ 

foustala

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

tu es sûr que ça eut marché?

retente les séquences hardware/software/réseau

modprobe -r
modprobe
ifdown
ifup
dhclient

et balance les logs du noyau

dmesg | grep "eth\|8139"

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

rosa@Karl:~$ dmesg | grep "eth\|8139"
[    0.152849] pci 0000:01:07.0: [10ec:8139] type 00 class 0x020000
[    2.533617] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.533625] 8139cp 0000:01:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.540041] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.547174] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[   21.490084] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   55.938460] 8139too 0000:01:07.0 eth0: link down
[   57.654267] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   57.730762] 8139too 0000:01:07.0 eth0: link down
[   59.962347] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   60.418750] 8139too 0000:01:07.0 eth0: link down
[   62.060606] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  107.072820] 8139too 0000:01:07.0 eth0: link down
[  108.641896] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  108.696487] 8139too 0000:01:07.0 eth0: link down
[  111.054936] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  111.109444] 8139too 0000:01:07.0 eth0: link down
[  113.520355] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  113.753196] 8139too 0000:01:07.0 eth0: link down
[  115.933352] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  116.082232] 8139too 0000:01:07.0 eth0: link down
[  118.398813] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  118.746959] 8139too 0000:01:07.0 eth0: link down
[  120.811842] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  120.824208] 8139too 0000:01:07.0 eth0: link down
[  123.224849] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  123.656838] 8139too 0000:01:07.0 eth0: link down
[  125.690297] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  125.734043] 8139too 0000:01:07.0 eth0: link down
[  128.103301] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  128.146984] 8139too 0000:01:07.0 eth0: link down
[  130.568752] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  130.580933] 8139too 0000:01:07.0 eth0: link down
[  132.981747] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  133.014848] 8139too 0000:01:07.0 eth0: link down
[  135.394745] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  135.427799] 8139too 0000:01:07.0 eth0: link down
[  137.860189] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  137.882731] 8139too 0000:01:07.0 eth0: link down
[  140.273184] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  140.295686] 8139too 0000:01:07.0 eth0: link down
[  142.686178] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  142.729601] 8139too 0000:01:07.0 eth0: link down
[  145.151641] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  145.331441] 8139too 0000:01:07.0 eth0: link down
[  147.564637] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  147.618448] 8139too 0000:01:07.0 eth0: link down
[  150.030056] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  150.136365] 8139too 0000:01:07.0 eth0: link down
[  152.443046] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  152.465343] 8139too 0000:01:07.0 eth0: link down
[  154.856068] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  155.046158] 8139too 0000:01:07.0 eth0: link down
[  157.321519] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  157.333206] 8139too 0000:01:07.0 eth0: link down
[  159.734505] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  159.767139] 8139too 0000:01:07.0 eth0: link down
[  162.199940] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  162.201073] 8139too 0000:01:07.0 eth0: link down
[  164.612949] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  164.655987] 8139too 0000:01:07.0 eth0: link down
[  167.025971] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  167.110914] 8139too 0000:01:07.0 eth0: link down
[  169.491438] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  169.502898] 8139too 0000:01:07.0 eth0: link down
[  171.904420] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  171.957792] 8139too 0000:01:07.0 eth0: link down
[  174.369889] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  174.370742] 8139too 0000:01:07.0 eth0: link down
[  176.782884] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  176.846659] 8139too 0000:01:07.0 eth0: link down
[  179.248333] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  179.553356] 8139too 0000:01:07.0 eth0: link down
[  181.661302] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  181.672549] 8139too 0000:01:07.0 eth0: link down
[  184.074330] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  184.253393] 8139too 0000:01:07.0 eth0: link down
[  186.539776] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  186.666313] 8139too 0000:01:07.0 eth0: link down
[  188.952779] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  189.310099] 8139too 0000:01:07.0 eth0: link down
[  191.365779] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  191.492253] 8139too 0000:01:07.0 eth0: link down
[  193.831178] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  193.842211] 8139too 0000:01:07.0 eth0: link down
[  196.244226] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  196.339135] 8139too 0000:01:07.0 eth0: link down
[  198.709671] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  198.919941] 8139too 0000:01:07.0 eth0: link down
[  201.122675] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  201.164998] 8139too 0000:01:07.0 eth0: link down
[  215.361285] 8139too: 8139too Fast Ethernet driver 0.9.28
[  215.362469] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[  215.370402] 8139too 0000:01:07.0 eth0: link down
[  215.370843] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  215.705520] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  215.705554] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  215.852569] 8139too 0000:01:07.0 eth0: link down
[  218.171015] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  218.202534] 8139too 0000:01:07.0 eth0: link down
[  220.584012] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  220.762405] 8139too 0000:01:07.0 eth0: link down
[  225.462468] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  225.525316] 8139too 0000:01:07.0 eth0: link down
[  227.875419] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  228.022199] 8139too 0000:01:07.0 eth0: link down
[  232.963747] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  645.800906] 8139too 0000:01:07.0 eth0: link down
[  647.369699] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  647.498069] 8139too 0000:01:07.0 eth0: link down
[  649.835164] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  649.890037] 8139too 0000:01:07.0 eth0: link down
[  652.353082] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  652.365928] 8139too 0000:01:07.0 eth0: link down
[  654.661164] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  654.694952] 8139too 0000:01:07.0 eth0: link down
[  657.126641] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  657.191832] 8139too 0000:01:07.0 eth0: link down
[  659.539600] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  659.583801] 8139too 0000:01:07.0 eth0: link down
[  662.005095] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  662.017737] 8139too 0000:01:07.0 eth0: link down
[  664.418090] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  664.514626] 8139too 0000:01:07.0 eth0: link down
[  666.831042] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  666.885654] 8139too 0000:01:07.0 eth0: link down
[  669.296541] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  669.403509] 8139too 0000:01:07.0 eth0: link down
[  671.709543] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  671.732491] 8139too 0000:01:07.0 eth0: link down
[  674.174955] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  674.271340] 8139too 0000:01:07.0 eth0: link down
[  676.587970] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  676.600352] 8139too 0000:01:07.0 eth0: link down
[  679.000956] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  679.055280] 8139too 0000:01:07.0 eth0: link down
[  681.466402] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  681.510193] 8139too 0000:01:07.0 eth0: link down
[  683.879407] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  684.049026] 8139too 0000:01:07.0 eth0: link down
[  697.308250] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 1605.403812] 8139too 0000:01:07.0 eth0: link down
[ 1606.958571] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 1609.796437] 8139too 0000:01:07.0 eth0: link down
[ 1611.362715] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 1887.860930] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1887.864903] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[ 1887.867976] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Depuis une dizaine de minutes, ca fonctionne bien ,par le cable et sans wifi.
J'ai besoin de sommeil, je suis désolé , je dois aller me coucher ... bonne nuit

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Ce matin , j'ai internet par le cable seulement si je tape les commandes habituelles :

modprobe -r
modprobe
ifdown
ifup
dhclient

voila ...

foustala

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

https://ubuntuforums.org/archive/index. … 02482.html

avant le modprobe -r

sudo mii-tool eth0 -F 10baseT-FD

NAME
       mii-tool - view, manipulate media-independent interface status


DESCRIPTION
       This  utility  checks or sets the status of a network interface's Media
       Independent Interface (MII) unit.  Most fast ethernet adapters  use  an
       MII to autonegotiate link speed and duplex setting.

       Most  intelligent  network  devices  use an autonegotiation protocol to
       communicate what media technologies they support, and then  select  the
       fastest  mutually  supported  media  technology.  
                    
                       Some  passive  devices,  such as single-speed hubs, are
       unable to autonegotiate.  To handle such devices, the MII protocol also
       allows  for establishing a link by simply detecting either a 10baseT or
       100baseT link beat.  The -F or --force options can be used to force the
       MII  to operate in one mode, instead of autonegotiating.  The -A and -F
       options are mutually exclusive.


-F media, --force=media
              Disable  autonegotiation, and force the MII to either 100baseTx-
              FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD operation.

Dernière modification par foustala (Le 23/04/2017, à 23:48)

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Oui j'ai tapé cela et puis apres le classique modprob -r , modprop ,etc ...
Comme d'habitude, le cable a marché, mais apres redémarrage, je n'avais plus internet par le cable.

foustala

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Avant, tu disais que tu perdais la connexion même sans redémarrer. maintenant, c'est seulement en cas de redémarrage?

Est-ce que tu peux vérifier que

mii-tool

élimine la répétition de cette ligne

8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

dans les logs du noyau?

dmesg | grep "eth\|8139"

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

J'ai l'impression qu'au bout de quelques dizaines de minutes, le cable "lache".

Sinon , tapé le mii-tool, mais la ligne que tu énonce nést pas presente, il y a juste half-duplex :

rosa@Karl:~$ sudo modprobe -r 8139too
[sudo] password for rosa: 
rosa@Karl:~$ sudo modprobe 8139too
rosa@Karl:~$ sudo ifdown eth0
ifdown: interface eth0 not configured
rosa@Karl:~$ sudo ifup eth0
Ignoring unknown interface eth0=eth0.
rosa@Karl:~$ sudo dhclient eth0
rosa@Karl:~$ mii-tool
SIOCGMIIPHY on 'eth0' failed: Operation not permitted
SIOCGMIIPHY on 'eth1' failed: Operation not permitted
SIOCGMIIPHY on 'eth2' failed: Operation not permitted
SIOCGMIIPHY on 'eth3' failed: Operation not permitted
SIOCGMIIPHY on 'eth4' failed: Operation not permitted
SIOCGMIIPHY on 'eth5' failed: Operation not permitted
SIOCGMIIPHY on 'eth6' failed: Operation not permitted
SIOCGMIIPHY on 'eth7' failed: Operation not permitted
no MII interfaces found
rosa@Karl:~$ dmesg | grep "eth\|8139"
[    0.128139] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164846] pci 0000:01:07.0: [10ec:8139] type 00 class 0x020000
[    2.364354] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.364360] 8139cp 0000:01:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.366816] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.367622] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[   23.283814] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[   35.448139] ath: regdomain 0x8114 dynamically updated by country IE
[   43.286178] 8139too 0000:01:07.0 eth0: link down
[  107.167463] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[  441.000290] 8139too: 8139too Fast Ethernet driver 0.9.28
[  441.001300] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[  441.006668] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[  518.682647] 8139too: 8139too Fast Ethernet driver 0.9.28
[  518.684701] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[  518.691301] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 3868.951252] 8139too 0000:01:07.0 eth0: link down
[ 4083.654804] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 6644.789169] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 6644.791086] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[ 6644.800564] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Ce que je ne comprends pas, c'est que auparavant, avant que je passe de la 14.04 LTS à la 16.04 LTS , je n'ai eu aucun probleme avec internet sur la 14.04 LTS.
Ce ne serait pas plus simple de tout bien nettoyer et apres ré-installer la 14.04 LTS ?

foustala

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

la commande mii-tool est celle du post #31 bien sûr

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Ah Ok.
Mais bon ca ne change pas grand chose :

rosa@Karl:~$ sudo mii-tool eth0 -F 10baseT-FD
[sudo] password for rosa: 
rosa@Karl:~$ sudo modprobe -r 8139too
rosa@Karl:~$ sudo modprobe 8139too
rosa@Karl:~$ sudo ifdown eth0
ifdown: interface eth0 not configured
rosa@Karl:~$ sudo ifup eth0
Ignoring unknown interface eth0=eth0.
rosa@Karl:~$ sudo dhclient eth0
rosa@Karl:~$ dmesg | grep "eth\|8139"
[    0.156852] pci 0000:01:07.0: [10ec:8139] type 00 class 0x020000
[    2.325877] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.329023] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[   25.256670] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[  175.754549] 8139too: 8139too Fast Ethernet driver 0.9.28
[  175.755920] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0x000000000001b800, 00:23:54:51:59:e7, IRQ 16
[  175.765056] 8139too 0000:01:07.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000

Jacky Camerde

Re : Apres retour sur 14.04 LTS internet cable ne marche plus [RESOLU]

Zut.
J'ai essayé sans rien taper dans le terminal , seulement en sélectionnant dans la barre en haut à gauche : DSL 1 , et ça marche maintenant.
Je ne sais pas à partir de quelle manipulation que nous avons faite cette connexion marchait. 

En tout cas merci de m'avoir aidé.

Longue vie à toi et à Ubuntu!

Dernière modification par Jacky Camerde (Le 05/05/2017, à 18:57)