#1 Le 21/06/2017, à 12:38
- lmdlg
[Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Bonjour,
Mon "ordinosaure" (2008 ? est-ce qu'il a le droit à cette appellation ?) Fujistu-Siemens Amilo Pi 3540 tourne actuellement sur lubuntu 16.04 - 64 bits afin de préserver son processeur. Cependant, le ventilo a tendance à se mettre en route assez rapidement, et à monter dans les tours au point que cela devienne désagréable.
J'ai nettoyé la grille qui est à l'arrière avec un aspirateur, puis ai suivi les conseils de nam1962, mais malgré ça, le ventilo tourne toujours. Y'a un moyen d'améliorer ça ? Et sinon que pensez-vous des tapis refroidisseurs pour portable ? C'est un vrai plus ?
à bientôt !
Dernière modification par lmdlg (Le 25/06/2017, à 19:30)
Lenovo G70-35 – Xubuntu 18.04.1 / bépoète
Hors ligne
#2 Le 21/06/2017, à 12:47
- Caribou22
Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Bonjour 
Bientôt 10 ans l'engin déjà ! https://www.notebookcheck.biz/Fujitsu-S … 607.0.html
Mais il peut encore rendre service un moment vu sa config
Peux-tu nous envoyer un rapport bisnext ?
Edit : Concernant les supports ventilés, ça peut soulager ton portable lors d'utilisations intensives (jeux, traitement photo etc.) mais comme l'a dit michel_04 en dessous, la première étape est une ventilation propre. Je te conseille de remédier à ça en premier (Il y a plein de tutos sur Youtube pour démonter son modèle d'ordi portable.)
Dernière modification par Caribou22 (Le 21/06/2017, à 13:08)
Hors ligne
#3 Le 21/06/2017, à 13:00
- michel_04
Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Bonjour,
lmdlg a écrit :
J'ai nettoyé la grille qui est à l'arrière avec un aspirateur
Pas très recommandé.
lmdlg a écrit :
Y'a un moyen d'améliorer ça ?
Oui.
Démonter ton portable (Notebook fujitsu siemens AMILO Pi 3540 Cleaning), nettoyer le ventilateur et la grille (air sec), nettoyer l'intérieur, en profiter pour remplacer la graisse thermique.
lmdlg a écrit :
Et sinon que pensez-vous des tapis refroidisseurs pour portable ? C'est un vrai plus ?
Hum, ça ne remplace pas un bon nettoyage, c'est un cache-misère, tôt ou tard il faudra nettoyer..
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#4 Le 21/06/2017, à 16:33
- lmdlg
Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Lenovo G70-35 – Xubuntu 18.04.1 / bépoète
Hors ligne
#5 Le 21/06/2017, à 18:57
- Caribou22
Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Le Bisnext : https://paste.debian.net/972595/
Jun 21, 2017, bisnext report id f841a
bisnext 0.05
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-81-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: LXDE (Openbox 3.6.1) dm: lightdm
Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop System: FUJITSU SIEMENS product: AMILO Pi 3540 v: 10600934644
Mobo: FUJITSU SIEMENS model: F47 v: 01
BIOS: Phoenix v: 1.06C date: 08/14/2008
Chassis: type: 10
Battery BAT0: charge: 1.4 Wh 100.0% condition: 1.4/44.0 Wh (3%)
volts: 12.5/10.8
model: FUJITSU SIEMENS F50IXX status: Full
CPU: Dual core Intel Core2 Duo T5800 (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 ssse3) bmips: 7979
clock speeds: min/max: 1200/2000 MHz 1: 2000 MHz 2: 2000 MHz
Memory: Array-1 capacity: 4 GB devices: 2 EC: None
Device-1: M1 size: 2 GB speed: 800 MHz type: DDR2
manufacturer: Mfg 0 part: SODIMM000
Device-2: M2 size: 2 GB speed: 800 MHz type: DDR2
manufacturer: Mfg 1 part: SODIMM001
Graphics: Card: NVIDIA G98M [GeForce 9300M GS]
bus-ID: 01:00.0 chip-ID: 10de:06e9
Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
Resolution: 1280x800@59.97hz
GLX Renderer: Gallium 0.4 on NV98
GLX Version: 3.3 Mesa 12.0.6 (compat-v: 3.0) Direct Rendering: Yes
Audio: Card Intel 82801I (ICH9 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:293e
Sound: Advanced Linux Sound Architecture v: k4.4.0-81-generic
Network: Card-1: Intel WiFi Link 5100
driver: iwlwifi bus-ID: 04:00.0 chip-ID: 8086:4232
IF: wlp4s0 state: up mac: <filter>
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: 5000
bus-ID: 05:00.0 chip-ID: 10ec:8136
IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 320.1GB (67.4% used)
ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Optical-1: /dev/sr0 model: HL-DT-ST DVDRAM GSA-T50N
rev: RW05 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 290G used: 198G (72%) fs: ext4 dev: /dev/sda1
label: N/A uuid: 3b68221f-c004-4006-bcb6-f26045179fc1
ID-2: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: 4b716237-3aef-4d05-9aac-4fd0bb2f6440
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: System Temperatures: cpu: 64.0C mobo: 0.0C gpu: 60.0
Fan Speeds (in rpm): cpu: N/A
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb-src http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu wily partner
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 57.3% command: firefox pid: 2107 mem: 584.43MB (14.8%)
2: cpu: 1.9% command: Xorg pid: 1074 mem: 49.02MB (1.2%)
3: cpu: 0.6% command: init pid: 1 mem: 6.00MB (0.1%)
4: cpu: 0.5% command: pulseaudio pid: 1970 mem: 11.09MB (0.2%)
5: cpu: 0.4% command: lxpanel pid: 1860 mem: 32.47MB (0.8%)
6: cpu: 0.3% command: bash pid: 4659 mem: 4.47MB (0.1%)
7: cpu: 0.3% command: lxterminal pid: 2198 mem: 25.39MB (0.6%)
8: cpu: 0.3% command: systemd-udevd pid: 253 mem: 5.55MB (0.1%)
9: cpu: 0.2% command: NetworkManager pid: 863 mem: 16.78MB (0.4%)
10: cpu: 0.2% daemon: ~kworker/0:2~ pid: 31 mem: 0.00MB (0.0%)
Info: Processes: 186 Uptime: 4 min Memory: 764.1/3946.8MB
Init: systemd v: 229 runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.21
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location. It also
embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
(,msdos1)/boot/grub
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 616,763,391 616,761,344 83 Linux
/dev/sda2 616,765,438 625,141,759 8,376,322 5 Extended
/dev/sda5 616,765,440 625,141,759 8,376,320 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 3b68221f-c004-4006-bcb6-f26045179fc1 ext4
/dev/sda5 4b716237-3aef-4d05-9aac-4fd0bb2f6440 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juin 21 17:27 ata-HL-DT-ST_DVDRAM_GSA-T50N_M5287M60113 -> ../../sr0
lrwxrwxrwx 1 root root 9 juin 21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 juin 21 17:27 wwn-0x50014ee201ceb7eb -> ../../sda
lrwxrwxrwx 1 root root 10 juin 21 17:27 wwn-0x50014ee201ceb7eb-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 21 17:27 wwn-0x50014ee201ceb7eb-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 21 17:27 wwn-0x50014ee201ceb7eb-part5 -> ../../sda5
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
_________________________=== Boot Files Contents ===___________________________
___________________________ sda1/boot/grub/grub.cfg: ___________________________
File size: 9383, Line count: 274, Menu entries (sub entries included) : 7
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file contents from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3b68221f-c004-4006-bcb6-f26045179fc1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3b68221f-c004-4006-bcb6-f26045179fc1
else
search --no-floppy --fs-uuid --set=root 3b68221f-c004-4006-bcb6-f26045179fc1
fi
linux /boot/vmlinuz-4.4.0-81-generic root=UUID=3b68221f-c004-4006-bcb6-f26045179fc1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-81-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3b68221f-c004-4006-bcb6-f26045179fc1
else
search --no-floppy --fs-uuid --set=root 3b68221f-c004-4006-bcb6-f26045179fc1
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3b68221f-c004-4006-bcb6-f26045179fc1
else
search --no-floppy --fs-uuid --set=root 3b68221f-c004-4006-bcb6-f26045179fc1
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
UUID=3b68221f-c004-4006-bcb6-f26045179fc1 / ext4 errors=remount-ro 0 1
UUID=4b716237-3aef-4d05-9aac-4fd0bb2f6440 none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-81-generic root=UUID=3b68221f-c004-4006-bcb6-f26045179fc1 ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 4.257s (kernel) + 43.123s (userspace) = 47.380s
blame, first 10:
networking.service 12.647s
grub-common.service 12.444s
dev-sda1.device 10.934s
winbind.service 9.842s
nmbd.service 9.823s
ModemManager.service 9.613s
samba-ad-dc.service 9.106s
accounts-daemon.service 9.091s
NetworkManager-wait-online.service 9.026s
apparmor.service 7.716s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 3.9G 696M 2.5G 16M 730M 2.9G
Swap: 4.0G 0B 4.0G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 / ext4 290G 198G 78G 72% 3%
Swap partition for hibernation : UUID=4b716237-3aef-4d05-9aac-4fd0bb2f6440
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
_______________________________ Modules Loaded _______________________________
Excerpt:
drm 364544 5 ttm,drm_kms_helper,nouveau
drm_kms_helper 155648 1 nouveau
i2c_algo_bit 16384 1 nouveau
mxm_wmi 16384 1 nouveau
nouveau 1495040 2
ttm 94208 1 nouveau
video 40960 1 nouveau
wmi 20480 2 mxm_wmi,nouveau
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
model : G98M [GeForce 9300M GS]
vendor : NVIDIA Corporation
modalias : pci:v000010DEd000006E9sv00001734sd00001137bc03sc00i00
driver : nvidia-340 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-304 - distro non-free
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
cups-driver-gutenprint 5.2.11~pre1-1
flashplugin-installer 24.0.0.186ubuntu0.16.04.1
fonts-droid 1:4.4.4r2-6ubuntu1
libapt-inst1.7:amd64 1.0.10.2ubuntu2
libapt-pkg4.16:amd64 1.0.10.2ubuntu2
libaudcore2:amd64 3.5-2
libbind9-90 1:9.9.5.dfsg-11ubuntu1.3
libbonobo2-0:amd64 2.32.1-3
libbonobo2-common 2.32.1-3
libcamel-1.2-52 3.16.5-1ubuntu3
libdns-export100 1:9.9.5.dfsg-11ubuntu1.3
libdns100 1:9.9.5.dfsg-11ubuntu1.3
libebook-contacts-1.2-1 3.16.5-1ubuntu3
libedataserver-1.2-20 3.16.5-1ubuntu3
libept1.4.16:amd64 1.0.14ubuntu1.1
libgif4:amd64 4.1.6-11
libgnome-desktop-3-10:amd64 3.16.2-2ubuntu2
libgnome2-common 2.32.1-5ubuntu1
libgnomevfs2-common 1:2.24.4-6.1ubuntu1
libgnutls-deb0-28:amd64 3.3.15-5ubuntu2
libgsl0ldbl:amd64 1.16+dfsg-4
libgtop2-10 2.30.0.is.2.30.0-0ubuntu1
libimobiledevice4:amd64 1.1.6+dfsg-3.1build1
libirs-export91 1:9.9.5.dfsg-11ubuntu1.3
libisc-export95 1:9.9.5.dfsg-11ubuntu1.3
libisc95 1:9.9.5.dfsg-11ubuntu1.3
libisccc90 1:9.9.5.dfsg-11ubuntu1.3
libisccfg-export90 1:9.9.5.dfsg-11ubuntu1.3
libisccfg90 1:9.9.5.dfsg-11ubuntu1.3
libisl13:amd64 0.14-2
liblwres90 1:9.9.5.dfsg-11ubuntu1.3
libpoppler52:amd64 0.33.0-0ubuntu3.1
libpresage1:amd64 0.9.1-0ubuntu2
libprocps3:amd64 1:3.3.9-1ubuntu8
libpython3.4-minimal:amd64 3.4.3-9ubuntu1
libqpdf13v5:amd64 5.1.3-2
libusbmuxd2:amd64 1.0.9-1build1
libvpx2:amd64 1.4.0-4
libvte-2.90-9 1:0.36.3-1ubuntu2
libvte-2.90-common 1:0.36.3-1ubuntu2
libx264-146:amd64 2:0.146.2555+git0c21480-1
libx265-59:amd64 1.7-4
libxtables10 1.4.21-2ubuntu2
linux-image-4.2.0-16-generic 4.2.0-16.19
linux-image-4.2.0-36-generic 4.2.0-36.42
linux-image-4.4.0-22-generic 4.4.0-22.40
linux-image-4.4.0-24-generic 4.4.0-24.43
linux-image-4.4.0-34-generic 4.4.0-34.53
linux-image-4.4.0-38-generic 4.4.0-38.57
linux-image-4.4.0-47-generic 4.4.0-47.68
linux-image-4.4.0-53-generic 4.4.0-53.74
linux-image-4.4.0-62-generic 4.4.0-62.83
linux-image-4.4.0-64-generic 4.4.0-64.85
linux-image-4.4.0-66-generic 4.4.0-66.87
linux-image-4.4.0-77-generic 4.4.0-77.98
linux-image-extra-4.2.0-16-generic 4.2.0-16.19
linux-image-extra-4.2.0-36-generic 4.2.0-36.42
linux-image-extra-4.4.0-22-generic 4.4.0-22.40
linux-image-extra-4.4.0-24-generic 4.4.0-24.43
linux-image-extra-4.4.0-34-generic 4.4.0-34.53
linux-image-extra-4.4.0-38-generic 4.4.0-38.57
linux-image-extra-4.4.0-47-generic 4.4.0-47.68
linux-image-extra-4.4.0-53-generic 4.4.0-53.74
linux-image-extra-4.4.0-62-generic 4.4.0-62.83
linux-image-extra-4.4.0-64-generic 4.4.0-64.85
linux-image-extra-4.4.0-66-generic 4.4.0-66.87
linux-image-extra-4.4.0-77-generic 4.4.0-77.98
pepperflashplugin-nonfree 1.8.2ubuntu1
perl-modules 5.20.2-6ubuntu0.2
python3.4 3.4.3-9ubuntu1
python3.4-minimal 3.4.3-9ubuntu1
snap-confine 2.25
ttf-indic-fonts-core 1:0.5.14ubuntu1
Use the following command to clean old configuration files:
sudo apt purge cups-driver-gutenprint flashplugin-installer fonts-droid libapt-inst1.7:amd64 libapt-pkg4.16:amd64 libaudcore2:amd64 libbind9-90 libbonobo2-0:amd64 libbonobo2-common libcamel-1.2-52 libdns-export100 libdns100 libebook-contacts-1.2-1 libedataserver-1.2-20 libept1.4.16:amd64 libgif4:amd64 libgnome-desktop-3-10:amd64 libgnome2-common libgnomevfs2-common libgnutls-deb0-28:amd64 libgsl0ldbl:amd64 libgtop2-10 libimobiledevice4:amd64 libirs-export91 libisc-export95 libisc95 libisccc90 libisccfg-export90 libisccfg90 libisl13:amd64 liblwres90 libpoppler52:amd64 libpresage1:amd64 libprocps3:amd64 libpython3.4-minimal:amd64 libqpdf13v5:amd64 libusbmuxd2:amd64 libvpx2:amd64 libvte-2.90-9 libvte-2.90-common libx264-146:amd64 libx265-59:amd64 libxtables10 linux-image-4.2.0-16-generic linux-image-4.2.0-36-generic linux-image-4.4.0-22-generic linux-image-4.4.0-24-generic linux-image-4.4.0-34-generic linux-image-4.4.0-38-generic linux-image-4.4.0-47-generic linux-image-4.4.0-53-generic linux-image-4.4.0-62-generic linux-image-4.4.0-64-generic linux-image-4.4.0-66-generic linux-image-4.4.0-77-generic linux-image-extra-4.2.0-16-generic linux-image-extra-4.2.0-36-generic linux-image-extra-4.4.0-22-generic linux-image-extra-4.4.0-24-generic linux-image-extra-4.4.0-34-generic linux-image-extra-4.4.0-38-generic linux-image-extra-4.4.0-47-generic linux-image-extra-4.4.0-53-generic linux-image-extra-4.4.0-62-generic linux-image-extra-4.4.0-64-generic linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-77-generic pepperflashplugin-nonfree perl-modules python3.4 python3.4-minimal snap-confine ttf-indic-fonts-core
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.81.87
linux-headers-4.4.0-78 4.4.0-78.99
linux-headers-4.4.0-78-generic 4.4.0-78.99
linux-headers-4.4.0-81 4.4.0-81.104
linux-headers-4.4.0-81-generic 4.4.0-81.104
linux-headers-generic 4.4.0.81.87
linux-image-4.4.0-78-generic 4.4.0-78.99
linux-image-4.4.0-81-generic 4.4.0-81.104
linux-image-extra-4.4.0-78-generic 4.4.0-78.99
linux-image-extra-4.4.0-81-generic 4.4.0-81.104
linux-image-generic 4.4.0.81.87
linux-tools-4.4.0-78 4.4.0-78.99
linux-tools-4.4.0-78-generic 4.4.0-78.99
linux-tools-4.4.0-81 4.4.0-81.104
linux-tools-4.4.0-81-generic 4.4.0-81.104
linux-tools-common 4.4.0-81.104
linux-tools-virtual 4.4.0.81.87
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.125117] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.152896] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.157494] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.224443] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[ 7.269250] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[ 7.269302] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[ 10.726092] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.082597] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
_____________________________________ Xorg ____________________________________
Partial log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.149] (--) PCI:*(0:1:0:0) 10de:06e9:1734:1137 rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[ 34.484] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 34.552] (EE) Failed to load module "nvidia" (module does not exist, 0)
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-81-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-81-generic/updates/dkms
Is nouveau loaded? yes
Vendor/Device Id: 10de:6e9
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "nouveau"
Found "/dev/dri/card0", driven by "nouveau"
output 0:
card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Skipping "/dev/dri/card0", driven by "nouveau"
last cards number = 1
Has nvidia? yes
How many cards? 1
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is mesa enabled? yes
Is mesa egl enabled? yes
Is mesa available? yes
Is mesa egl available? yes
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-81-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-22ZCT0
LU WWN Device Id: 5 0014ee 201ceb7eb
Firmware Version: 11.01A11
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Wed Jun 21 17:32:10 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1
3 Spin_Up_Time POS--K 186 185 021 - 1666
4 Start_Stop_Count -O--CK 097 097 000 - 3354
9 Power_On_Hours -O--CK 085 085 000 - 11064
12 Power_Cycle_Count -O--CK 097 097 000 - 3343
192 Power-Off_Retract_Count -O--CK 200 200 000 - 305
193 Load_Cycle_Count -O--CK 162 162 000 - 114086
194 Temperature_Celsius -O---K 114 086 000 - 33
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 11004 hours (458 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 93 37 38 40 Error: UNC at LBA = 0x00383793 = 3684243
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 90 40 37 38 00 08 00:14:49.921 READ FPDMA QUEUED
60 00 88 40 36 38 00 08 00:14:49.921 READ FPDMA QUEUED
60 40 80 c0 12 38 00 08 00:14:49.908 READ FPDMA QUEUED
60 40 78 c0 34 38 00 08 00:14:49.908 READ FPDMA QUEUED
60 40 70 80 2f 38 00 08 00:14:49.907 READ FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 10592 hours (441 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 31 a6 c3 40 Error: UNC at LBA = 0x00c3a631 = 12822065
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 10 10 30 a6 c3 24 08 02:34:03.081 READ FPDMA QUEUED
60 20 08 00 a6 c3 24 08 02:34:03.081 READ FPDMA QUEUED
60 20 00 a0 44 c4 24 08 02:34:03.080 READ FPDMA QUEUED
60 10 f0 c0 44 c4 24 08 02:34:03.080 READ FPDMA QUEUED
60 10 e8 d0 44 c4 24 08 02:34:03.080 READ FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 10592 hours (441 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 00 26 a6 c3 40 Error: AMNF at LBA = 0x00c3a626 = 12822054
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 28 a0 60 6b e5 0b 08 02:33:54.072 READ FPDMA QUEUED
60 10 98 40 6b e5 0b 08 02:33:54.072 READ FPDMA QUEUED
60 18 90 70 6a e5 0b 08 02:33:54.072 READ FPDMA QUEUED
60 10 88 20 a6 c3 24 08 02:33:54.050 READ FPDMA QUEUED
60 20 80 e0 fc 84 0d 08 02:33:54.041 READ FPDMA QUEUEDLa config me paraît suffisante pour Lubuntu 16.04. C'est surtout par un coup de tournevis qu'il faut commencer du coup en effet
Un tuto que j'ai trouvé, qui permet d'accéder au ventilateur : https://www.youtube.com/watch?v=A8Y3vJ5hzVU
Hors ligne
#6 Le 25/06/2017, à 17:11
- lmdlg
Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Bonjour,
@Michel_04 et @Caribou22 merci beaucoup, ce tuto m'a permis de nettoyer correctement le ventilo qui est silencieux, désormais, c'est assez bluffant. En revanche, je n'ai pas osé changer la pâte thermique, mais comme j'ai démonté le PC une première fois, je saurai refaire, si d'aventure sa chauffe ne me convenait pas. Mais pour l'instant ça va. impecc'.
Merci encore, ce PC-portable va pouvoir faire encore 8 ans !
à bientôt !
Dernière modification par lmdlg (Le 25/06/2017, à 17:12)
Lenovo G70-35 – Xubuntu 18.04.1 / bépoète
Hors ligne
#7 Le 26/06/2017, à 12:44
- Caribou22
Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu
Bonne nouvelle !
Je n'ai jamais osé changer la pâte thermique non plus, mais le dépoussiérage fait déjà beaucoup de bien 
Hors ligne