#1 Le 29/01/2018, à 03:50
- Wusha
Boot d'Ubuntu anormalement long
Bonsoir,
J'ai installé Ubuntu sur mon pc hier (première tentative linuxienne, je n'y connais absolument rien). Apparemment tout s'est bien passé, Ubuntu fonctionne correctement. J'ai partitionné mon disque dur pour garder Windows, le GRUB fonctionne bien, je peux sans problème passer sur l'un ou l'autre a l'allumage.
Seul problème, et pas des moindres, Ubuntu met 25 min a démarrer. Au premier redémarrage après installation j'ai pensé que c'était normal, le temps de tout paramétrer. Mais j'en suis au troisième et le problème reste le même: Après avoir sélectionné Ubuntu sur le GRUB, j'ai un écran violet ou un écran noir pendant environ 25 min avant d'atteindre la page d'identification.
J'ai remarqué que depuis l'installation, a chaque fois que je veux allumer Windows il me propose systématiquement une analyse de /C: . Que le PC me propose d'annuler en appuyant sur une touche. Je suppose donc que le lancement d'Ubuntu commence par une analyse de /. mais que je ne peux pas annuler du coup vu que l'écran est fixe (d'autant qu'a un moment, juste au moment de passer de l'écran noir a la page d'identification, j'ai vu furtivement une ligne avec un décompte de fichiers, donc ça me confirme un peu).
Il y a-t-il un moyen de regarder quelque part pourquoi il y a une vérification systématique des disques et comment enlever ce paramètre?
Voyez-vous un autre problème possible qui pourrait ralentir a ce point le démarrage?
(Je suis vraiment novice en la matière, donc dans vos réponses, n'hésitez pas à détailler au maximum)
Merci d'avance
Wusha
Dernière modification par Wusha (Le 29/01/2018, à 13:48)
Hors ligne
#2 Le 29/01/2018, à 10:43
- LukePerp
Re : Boot d'Ubuntu anormalement long
Bonjour,
Pour commencer, cherche sur internet comment désactiver sous windows le scan au démarrage des parititons.
Ensuite, peux tu faire un rapport de boot info, regardes la documentation.
Après, je t'indiquerai comment diagnostiquer les partitions avec smartmontool.
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#3 Le 29/01/2018, à 13:02
- Wusha
Re : Boot d'Ubuntu anormalement long
Alors voici le boot info : http://paste.ubuntu.com/26483009/
Sinon je suis allée voir ce sujet :./viewtopic.php?id=104603 et j'ai vu du coup quel pourrait être mon problème vu que mon fstab donne:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb3 during installation
UUID=28dd97ff-0b45-4b29-b998-0c5ae4d68233 /home ext4 defaults 0 2
# swap was on /dev/sdb4 during installation
UUID=a98eef87-839f-472b-b414-b79b2b6e4b3e none swap sw 0 0D'après ce sujet, il faudrait que je change le 1 et le 2 en 0. Mais je ne sais absolument pas comment modifier ça
Modération : merci d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 29/01/2018, à 13:06)
Hors ligne
#4 Le 29/01/2018, à 13:06
- thegamer94400
Re : Boot d'Ubuntu anormalement long
Peux tu mettre tout ceci entre balises code (les petits « <> » au dessus de la textbox) et mettre tout le retour dedans
Merci
Passionné d'informatique et de photographie. J'essaie d'utiliser le plus possible linux
Mon site photo : http://alexandrejublotphotographie.website
Hors ligne
#5 Le 29/01/2018, à 13:57
- Wusha
Re : Boot d'Ubuntu anormalement long
Update: ça y est je suis passée sur Windows pour enlever la vérification de C:, ça va effectivement beaucoup plus vite... mais c'est quand même long.
C'est à dire qu'avant je passais 20 min sur un écran fixe, avant d'atteindre la page avec marqué Ubuntu et le décompte en dessous. Puis encore 5 min sur cette page avant d'atteindre l'identification. Maintenant seule la dernière étape subsiste, je passe directement sur la page Ubuntu. Donc les 20 min de noir avant ça était la vérification Windows. Donc déjà ça c'est fait.
Mais du coup il faut aussi que j'annule la vérification de mes autres partitions. D'autant qu'au moment de passer de la page marquée Ubuntu a la page d'identification, il me met un écran noir avec écrit en haut
/dev/sda2: clean, 230917/9158656 files, 1888854/36621568 blocksJ'en déduis donc que c'est bien une vérification des disques
Hors ligne
#6 Le 29/01/2018, à 14:27
- LukePerp
Re : Boot d'Ubuntu anormalement long
wusha, avant de bricoler, renseigne toi.
Ne touche pas à fstab, il est correct.
Ton boot info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 488,675,876 488,673,829 7 NTFS / exFAT / HPFS
/dev/sda2 488,677,376 781,649,919 292,972,544 83 Linux
/dev/sda3 781,649,920 1,949,618,175 1,167,968,256 83 Linux
/dev/sda4 1,949,618,176 1,953,523,711 3,905,536 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 CE66003266001DB9 ntfs
/dev/sda2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ext4
/dev/sda3 28dd97ff-0b45-4b29-b998-0c5ae4d68233 ext4
/dev/sda4 a98eef87-839f-472b-b414-b79b2b6e4b3e swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 29 03:18 ata-HL-DT-ST_DVDRAM_GH22NS50_K0098Q30552 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 29 11:57 ata-SAMSUNG_HD103SJ_S246JDWSC49382 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 29 11:57 ata-SAMSUNG_HD103SJ_S246JDWSC49382-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 29 11:57 ata-SAMSUNG_HD103SJ_S246JDWSC49382-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 29 11:57 ata-SAMSUNG_HD103SJ_S246JDWSC49382-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 29 11:57 ata-SAMSUNG_HD103SJ_S246JDWSC49382-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Jan 29 03:18 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 29 11:57 wwn-0x50024e9002a6f4a1 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 29 11:57 wwn-0x50024e9002a6f4a1-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 29 11:57 wwn-0x50024e9002a6f4a1-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 29 11:57 wwn-0x50024e9002a6f4a1-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 29 11:57 wwn-0x50024e9002a6f4a1-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/ana/CE66003266001DB9 fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda3 /home ext4 (rw,relatime,data=ordered)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
linux /boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
menuentry 'Ubuntu, avec Linux 4.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-32-generic-advanced-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
echo 'Chargement de Linux 4.13.0-32-generic…'
linux /boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-32-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-32-generic-init-upstart-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
echo 'Chargement de Linux 4.13.0-32-generic…'
linux /boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-32-generic-recovery-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
echo 'Chargement de Linux 4.13.0-32-generic…'
linux /boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /boot/vmlinuz-4.10.0-28-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /boot/vmlinuz-4.10.0-28-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /boot/vmlinuz-4.10.0-28-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-28-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
else
search --no-floppy --fs-uuid --set=root fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-CE66003266001DB9' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 CE66003266001DB9
else
search --no-floppy --fs-uuid --set=root CE66003266001DB9
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb3 during installation
UUID=28dd97ff-0b45-4b29-b998-0c5ae4d68233 /home ext4 defaults 0 2
# swap was on /dev/sdb4 during installation
UUID=a98eef87-839f-472b-b414-b79b2b6e4b3e none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
327.254863739 = 351.387234304 boot/grub/grub.cfg 1
337.230945587 = 362.098970624 boot/grub/i386-pc/core.img 1
234.545951843 = 251.841798144 boot/vmlinuz-4.10.0-28-generic 1
236.986461639 = 254.462275584 boot/vmlinuz-4.13.0-32-generic 1
236.986461639 = 254.462275584 vmlinuz 1
234.545951843 = 251.841798144 vmlinuz.old 1
237.402210236 = 254.908682240 boot/initrd.img-4.10.0-28-generic 2
237.440284729 = 254.949564416 boot/initrd.img-4.13.0-32-generic 2
237.440284729 = 254.949564416 initrd.img 2
237.402210236 = 254.908682240 initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20180129_1157 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/sda1: UUID="CE66003266001DB9" TYPE="ntfs" PARTUUID="a5f72933-01"
/dev/sda2: UUID="fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3" TYPE="ext4" PARTUUID="a5f72933-02"
/dev/sda3: UUID="28dd97ff-0b45-4b29-b998-0c5ae4d68233" TYPE="ext4" PARTUUID="a5f72933-03"
/dev/sda4: UUID="a98eef87-839f-472b-b414-b79b2b6e4b3e" TYPE="swap" PARTUUID="a5f72933-04"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 1 13:28 grub.d
total 80
-rwxr-xr-x 1 root root 9791 juin 21 2017 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 juin 21 2017 10_linux
-rwxr-xr-x 1 root root 11082 juin 21 2017 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 21 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 juin 21 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 21 2017 40_custom
-rwxr-xr-x 1 root root 216 juin 21 2017 41_custom
-rw-r--r-- 1 root root 483 juin 21 2017 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /media/ana/CE66003266001DB9.
sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA SAMSUNG HD103SJ:;
1:1049kB:250GB:250GB:ntfs::boot;
2:250GB:400GB:150GB:ext4::;
3:400GB:998GB:598GB:ext4::;
4:998GB:1000GB:2000MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sr0 rom 1024M
sda disk 931,5G
sda4 part swap 1,9G
sda2 part ext4 139,7G
sda3 part ext4 557G
sda1 part ntfs 233G
KNAME ROTA RO RM STATE MOUNTPOINT
sr0 1 0 1 running
sda 1 0 0 running
sda4 1 0 0 [SWAP]
sda2 1 0 0 /
sda3 1 0 0 /home
sda1 1 0 0 /media/ana/CE66003266001DB9
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1965188k,nr_inodes=491297,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=404084k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14488)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
/dev/sda3 on /home type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=404084k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /media/ana/CE66003266001DB9 type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kfd kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 10 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 20 92 20 1d 00 00 00 00 |........ . .....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 b9 1d 00 66 32 00 66 ce |...........f2.f.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 395M 12M 384M 3% /run
/dev/sda2 ext4 138G 5.1G 126G 4% /
tmpfs tmpfs 2.0G 18M 2.0G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
/dev/sda3 ext4 549G 163M 521G 1% /home
tmpfs tmpfs 395M 264K 395M 1% /run/user/1000
/dev/sda1 fuseblk 234G 103G 131G 45% /media/ana/CE66003266001DB9
=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa5f72933
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 488675876 488673829 233G 7 HPFS/NTFS/exFAT
/dev/sda2 488677376 781649919 292972544 139.7G 83 Linux
/dev/sda3 781649920 1949618175 1167968256 557G 83 Linux
/dev/sda4 1949618176 1953523711 3905536 1.9G 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.Je n'ai pas relevé d'anomalie pour le rapport boot.
Dernière modification par LukePerp (Le 29/01/2018, à 14:44)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#7 Le 29/01/2018, à 14:38
- Wusha
Re : Boot d'Ubuntu anormalement long
Ne t'inquiète pas, je n'ai touché a rien, j'attendais ta réponse.
Bon donc déjà si il n'y a pas d'anomalie sur le boot info ça veut dire que c'est pas si grave (je suppose?)
Mais il y a quand même une vérification des partitions a chaque lancement, qui prend du temps (et qu'il est inutile de faire a chaque fois). Une idée de comment la désactiver?
Hors ligne
#8 Le 29/01/2018, à 14:44
- LukePerp
Re : Boot d'Ubuntu anormalement long
Je veux connaitre la durée réelle de démarrage.
Redémarre ubuntu, puis tout de suite au début, ouvres le terminal et donne nous le retour de cette commande :
dmesget après seulement, donne nous le retour de :
sudo systemd-analyzesudo systemd-analyze critical-chainGamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#9 Le 29/01/2018, à 18:33
- Wusha
Re : Boot d'Ubuntu anormalement long
Alors voici la réponse a la première commande
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
[ 0.000000] Linux version 4.13.0-32-generic (buildd@lgw01-amd64-004) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 (Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfc90fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfcf3000-0x00000000cfcfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 5 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 3325M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfc91 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff957bc00f5440]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff957bc0092000] 92000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0xbeb2a000, 0xbeb2afff] PGTABLE
[ 0.000000] BRK [0xbeb2b000, 0xbeb2bfff] PGTABLE
[ 0.000000] BRK [0xbeb2c000, 0xbeb2cfff] PGTABLE
[ 0.000000] BRK [0xbeb2d000, 0xbeb2dfff] PGTABLE
[ 0.000000] BRK [0xbeb2e000, 0xbeb2efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3223a000-0x35114fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6E70 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CFCF3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CFCF3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CFCF30C0 00725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFCF0000 000040
[ 0.000000] ACPI: SSDT 0x00000000CFCFA400 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFCFACC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CFCFAD00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 0x00000000CFCFA340 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12ffd3000-0x12fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000097fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfc90fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1047592
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13235 pages used for memmap
[ 0.000000] DMA32 zone: 846993 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfc91000-0xcfceffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfcf3000-0xcfcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff957cefc00000 s146520 r8192 d29608 u262144
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031200
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xfbfe000000-0xfbffffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3917740K/4190368K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 272628K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 37823 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3019.878 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6039.75 BogoMIPS (lpj=12079512)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.004000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.004000] Security Framework initialized
[ 0.004000] Yama: becoming mindful.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.008372] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008966] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008994] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009012] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009212] FEATURE SPEC_CTRL Not Present
[ 0.009213] FEATURE IBPB Not Present
[ 0.009213] Disabling indirect branch predictor support
[ 0.009214] CPU: Physical Processor ID: 0
[ 0.009215] CPU: Processor Core ID: 0
[ 0.009216] mce: CPU supports 6 MCE banks
[ 0.009222] LVT offset 0 assigned for vector 0xf9
[ 0.009224] process: using AMD E400 aware idle routine
[ 0.009226] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.009226] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.010524] Freeing SMP alternatives memory: 36K
[ 0.012011] process: System has AMD C1E enabled
[ 0.012097] smpboot: Max logical packages: 2
[ 0.012626] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060000] process: Switch to broadcast mode on CPU0
[ 0.060000] smpboot: CPU0: AMD Phenom(tm) II X4 945 Processor (family: 0x10, model: 0x4, stepping: 0x2)
[ 0.060000] Performance Events: AMD PMU driver.
[ 0.060000] ... version: 0
[ 0.060000] ... bit width: 48
[ 0.060000] ... generic registers: 4
[ 0.060000] ... value mask: 0000ffffffffffff
[ 0.060000] ... max period: 00007fffffffffff
[ 0.060000] ... fixed-purpose events: 0
[ 0.060000] ... event mask: 000000000000000f
[ 0.060000] Hierarchical SRCU implementation.
[ 0.060000] smp: Bringing up secondary CPUs ...
[ 0.060000] x86: Booting SMP configuration:
[ 0.060000] .... node #0, CPUs: #1
[ 0.004000] process: Switch to broadcast mode on CPU1
[ 0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060000] #2
[ 0.004000] process: Switch to broadcast mode on CPU2
[ 0.060068] #3
[ 0.004000] process: Switch to broadcast mode on CPU3
[ 0.064055] smp: Brought up 1 node, 4 CPUs
[ 0.064055] smpboot: Total of 4 processors activated (24159.02 BogoMIPS)
[ 0.068284] devtmpfs: initialized
[ 0.068284] x86/mm: Memory block size: 128MB
[ 0.068390] evm: security.selinux
[ 0.068391] evm: security.SMACK64
[ 0.068391] evm: security.SMACK64EXEC
[ 0.068391] evm: security.SMACK64TRANSMUTE
[ 0.068392] evm: security.SMACK64MMAP
[ 0.068392] evm: security.ima
[ 0.068392] evm: security.capability
[ 0.068412] PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf2fff] (12288 bytes)
[ 0.068412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.068412] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.068412] pinctrl core: initialized pinctrl subsystem
[ 0.068412] RTC time: 16:21:10, date: 01/29/18
[ 0.068412] NET: Registered protocol family 16
[ 0.068489] cpuidle: using governor ladder
[ 0.068489] cpuidle: using governor menu
[ 0.068489] PCCT header not found.
[ 0.068489] node 0 link 0: io port [b000, ffff]
[ 0.068489] TOM: 00000000d0000000 aka 3328M
[ 0.068489] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.068489] node 0 link 0: mmio [a0000, bffff]
[ 0.068489] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.068489] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.068489] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[ 0.068489] TOM2: 0000000130000000 aka 4864M
[ 0.068489] bus: [bus 00-04] on node 0 link 0
[ 0.068489] bus: 00 [io 0x0000-0xffff]
[ 0.068489] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.068489] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.068489] bus: 00 [mem 0xe0500000-0xffffffff]
[ 0.068489] bus: 00 [mem 0xe0100000-0xe04fffff]
[ 0.068489] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.068489] ACPI: bus type PCI registered
[ 0.068489] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.068489] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.068489] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.068489] PCI: Using configuration type 1 for base access
[ 0.072038] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072038] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072070] ACPI: Added _OSI(Module Device)
[ 0.072071] ACPI: Added _OSI(Processor Device)
[ 0.072072] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072072] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.076086] ACPI: Interpreter enabled
[ 0.076103] ACPI: (supports S0 S3 S4 S5)
[ 0.076104] ACPI: Using IOAPIC for interrupt routing
[ 0.076157] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.076270] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.078834] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.080008] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.080012] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.080206] PCI host bridge to bus 0000:00
[ 0.080207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.080209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.080210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.080214] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.080215] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
[ 0.080217] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.080224] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[ 0.080235] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 0.080310] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.080343] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.080409] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
[ 0.080439] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.080507] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.080537] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.080611] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.080631] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.080639] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.080648] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.080656] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.080664] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.080673] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.080767] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.080784] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.080896] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.080913] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.081029] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.081048] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.081122] pci 0000:00:12.2: supports D1 D2
[ 0.081123] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.081192] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.081208] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.081320] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.081336] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.081453] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.081473] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.081547] pci 0000:00:13.2: supports D1 D2
[ 0.081548] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.081619] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.081759] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.081777] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.081785] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.081793] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.081801] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.081809] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.081828] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.081829] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.081830] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.081831] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.081912] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.081935] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.081997] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.082060] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.082184] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.082281] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.082298] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[ 0.082413] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.082472] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.082529] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.082583] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.082640] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.082732] pci 0000:01:00.0: [1002:9460] type 00 class 0x030000
[ 0.082749] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.082758] pci 0000:01:00.0: reg 0x18: [mem 0xfdee0000-0xfdeeffff 64bit]
[ 0.082764] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
[ 0.082774] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.082806] pci 0000:01:00.0: supports D1 D2
[ 0.082841] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[ 0.082858] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 0.082913] pci 0000:01:00.1: supports D1 D2
[ 0.092015] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.092019] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.092021] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.092024] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.092082] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601
[ 0.092154] pci 0000:02:00.0: reg 0x24: [mem 0xfddfe000-0xfddfffff]
[ 0.092211] pci 0000:02:00.0: PME# supported from D3hot
[ 0.092261] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.092279] pci 0000:02:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.092286] pci 0000:02:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.092293] pci 0000:02:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.092300] pci 0000:02:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.092307] pci 0000:02:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.092379] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.092385] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.092388] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.092389] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.092392] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.092427] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.092446] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff]
[ 0.092464] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.092476] pci 0000:03:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.092484] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.092539] pci 0000:03:00.0: supports D1 D2
[ 0.092540] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.104013] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.104016] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.104017] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.104020] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.104071] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.104097] pci 0000:04:0e.0: reg 0x10: [mem 0xfdbff000-0xfdbff7ff]
[ 0.104109] pci 0000:04:0e.0: reg 0x14: [mem 0xfdbf8000-0xfdbfbfff]
[ 0.104197] pci 0000:04:0e.0: supports D1 D2
[ 0.104198] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.104252] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.104255] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.104258] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.104261] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.104262] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.104264] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.104265] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.104266] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.104267] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
[ 0.104487] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104526] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104563] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104598] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104634] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104670] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104706] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104742] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.105283] SCSI subsystem initialized
[ 0.105296] libata version 3.00 loaded.
[ 0.105296] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.105296] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.105296] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.105296] vgaarb: loaded
[ 0.105296] ACPI: bus type USB registered
[ 0.105296] usbcore: registered new interface driver usbfs
[ 0.105296] usbcore: registered new interface driver hub
[ 0.105296] usbcore: registered new device driver usb
[ 0.105296] EDAC MC: Ver: 3.0.0
[ 0.105296] PCI: Using ACPI for IRQ routing
[ 0.110283] PCI: pci_cache_line_size set to 64 bytes
[ 0.110340] e820: reserve RAM buffer [mem 0x00098400-0x0009ffff]
[ 0.110341] e820: reserve RAM buffer [mem 0xcfc91000-0xcfffffff]
[ 0.110418] NetLabel: Initializing
[ 0.110419] NetLabel: domain hash size = 128
[ 0.110419] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.110432] NetLabel: unlabeled traffic allowed by default
[ 0.112039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.112039] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.116047] clocksource: Switched to clocksource hpet
[ 0.126754] VFS: Disk quotas dquot_6.6.0
[ 0.126773] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.126872] AppArmor: AppArmor Filesystem Enabled
[ 0.126911] pnp: PnP ACPI init
[ 0.127009] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.127011] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.127012] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.127015] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127234] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.127241] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.127261] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.127263] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.127264] system 00:01: [io 0x040b] has been reserved
[ 0.127265] system 00:01: [io 0x04d6] has been reserved
[ 0.127267] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.127268] system 00:01: [io 0x0c14] has been reserved
[ 0.127269] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.127270] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.127271] system 00:01: [io 0x0c6f] has been reserved
[ 0.127272] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.127274] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.127275] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.127276] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.127277] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.127279] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.127280] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.127281] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.127282] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.127285] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127398] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.127639] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.127705] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.127707] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127830] system 00:05: [mem 0x000d8400-0x000dbfff] has been reserved
[ 0.127831] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.127833] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.127834] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.127835] system 00:05: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
[ 0.127836] system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.127838] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.127839] system 00:05: [mem 0x00100000-0xcfceffff] could not be reserved
[ 0.127840] system 00:05: [mem 0xcfd00000-0xcfdfffff] has been reserved
[ 0.127841] system 00:05: [mem 0xcfe00000-0xcfefffff] could not be reserved
[ 0.127843] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.127844] system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.127845] system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.127847] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.127861] pnp: PnP ACPI: found 6 devices
[ 0.134580] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.134603] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.134605] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.134606] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.134609] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.134610] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.134613] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.134614] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.134616] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.134618] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.134621] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
[ 0.134622] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.134623] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.134625] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.134627] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.134630] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.134632] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.134636] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.134638] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.134645] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.134646] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.134647] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.134648] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.134649] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.134650] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.134651] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.134652] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.134654] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.134655] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.134656] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.134657] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.134658] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.134659] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.134661] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.134662] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.134663] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.134664] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.134665] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.134666] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.134667] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.134668] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.134726] NET: Registered protocol family 2
[ 0.134881] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.134970] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.135104] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.135159] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.135184] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.135243] NET: Registered protocol family 1
[ 0.536538] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.536543] pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.536546] pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.536553] PCI: CLS 64 bytes, default 64
[ 0.536589] Unpacking initramfs...
[ 1.215190] Freeing initrd memory: 47980K
[ 1.215950] PCI-DMA: Disabling AGP.
[ 1.216061] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.216061] PCI-DMA: using GART IOMMU.
[ 1.216063] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.218939] LVT offset 1 assigned for vector 0x400
[ 1.218946] IBS: LVT offset 1 assigned
[ 1.219078] perf: AMD IBS detected (0x0000001f)
[ 1.219130] Scanning for low memory corruption every 60 seconds
[ 1.219408] audit: initializing netlink subsys (disabled)
[ 1.219501] audit: type=2000 audit(1517242870.219:1): state=initialized audit_enabled=0 res=1
[ 1.219753] Initialise system trusted keyrings
[ 1.219762] Key type blacklist registered
[ 1.219818] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.220969] zbud: loaded
[ 1.221337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.221501] fuse init (API version 7.26)
[ 1.223589] Key type asymmetric registered
[ 1.223590] Asymmetric key parser 'x509' registered
[ 1.223638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.223707] io scheduler noop registered
[ 1.223707] io scheduler deadline registered
[ 1.223732] io scheduler cfq registered (default)
[ 1.224457] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.224467] ACPI: Power Button [PWRB]
[ 1.224499] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.224537] ACPI: Power Button [PWRF]
[ 1.224559] ACPI: ACPI: processor limited to max C-state 1
[ 1.224708] GHES: HEST is not enabled!
[ 1.224787] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.245303] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.246692] Linux agpgart interface v0.103
[ 1.248125] loop: module loaded
[ 1.248302] libphy: Fixed MDIO Bus: probed
[ 1.248303] tun: Universal TUN/TAP device driver, 1.6
[ 1.248336] PPP generic driver version 2.4.2
[ 1.248375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.248377] ehci-pci: EHCI PCI platform driver
[ 1.248505] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.248511] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.248514] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.248523] ehci-pci 0000:00:12.2: debug port 1
[ 1.248568] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.264443] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.264478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.264480] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.264481] usb usb1: Product: EHCI Host Controller
[ 1.264482] usb usb1: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[ 1.264483] usb usb1: SerialNumber: 0000:00:12.2
[ 1.264587] hub 1-0:1.0: USB hub found
[ 1.264592] hub 1-0:1.0: 6 ports detected
[ 1.264823] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.264827] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.264829] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.264838] ehci-pci 0000:00:13.2: debug port 1
[ 1.264875] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.280450] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.280479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.280480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280481] usb usb2: Product: EHCI Host Controller
[ 1.280482] usb usb2: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[ 1.280483] usb usb2: SerialNumber: 0000:00:13.2
[ 1.280567] hub 2-0:1.0: USB hub found
[ 1.280570] hub 2-0:1.0: 6 ports detected
[ 1.280681] ehci-platform: EHCI generic platform driver
[ 1.280688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.280690] ohci-pci: OHCI PCI platform driver
[ 1.280786] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.280791] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.280816] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.344404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.344405] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.344406] usb usb3: Product: OHCI PCI host controller
[ 1.344407] usb usb3: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.344408] usb usb3: SerialNumber: 0000:00:12.0
[ 1.344507] hub 3-0:1.0: USB hub found
[ 1.344514] hub 3-0:1.0: 3 ports detected
[ 1.344699] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.344703] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.344716] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.408499] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.408500] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.408502] usb usb4: Product: OHCI PCI host controller
[ 1.408502] usb usb4: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.408503] usb usb4: SerialNumber: 0000:00:12.1
[ 1.408612] hub 4-0:1.0: USB hub found
[ 1.408619] hub 4-0:1.0: 3 ports detected
[ 1.408820] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.408824] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.408854] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.472483] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.472484] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.472485] usb usb5: Product: OHCI PCI host controller
[ 1.472486] usb usb5: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.472487] usb usb5: SerialNumber: 0000:00:13.0
[ 1.472584] hub 5-0:1.0: USB hub found
[ 1.472590] hub 5-0:1.0: 3 ports detected
[ 1.472778] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.472781] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.472794] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.536483] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.536484] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.536485] usb usb6: Product: OHCI PCI host controller
[ 1.536486] usb usb6: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.536487] usb usb6: SerialNumber: 0000:00:13.1
[ 1.536580] hub 6-0:1.0: USB hub found
[ 1.536586] hub 6-0:1.0: 3 ports detected
[ 1.536772] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.536778] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.536790] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.600481] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.600482] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600483] usb usb7: Product: OHCI PCI host controller
[ 1.600484] usb usb7: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.600485] usb usb7: SerialNumber: 0000:00:14.5
[ 1.600580] hub 7-0:1.0: USB hub found
[ 1.600587] hub 7-0:1.0: 2 ports detected
[ 1.600673] ohci-platform: OHCI generic platform driver
[ 1.600681] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.600724] i8042: PNP: No PS/2 controller found.
[ 1.600725] i8042: Probing ports directly.
[ 1.608042] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 1.634407] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.634408] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.765627] usb 2-2: New USB device found, idVendor=050d, idProduct=615a
[ 1.765629] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.765630] usb 2-2: Product: Play Wireless USB Adapter
[ 1.765631] usb 2-2: Manufacturer: Belkin Wireless Networks
[ 1.765632] usb 2-2: SerialNumber: 0
[ 1.888509] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.888607] mousedev: PS/2 mouse device common for all mice
[ 1.888736] rtc_cmos 00:02: RTC can wake from S4
[ 1.888841] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.888873] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.888877] i2c /dev entries driver
[ 1.888916] device-mapper: uevent: version 1.0.3
[ 1.888975] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.889066] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.889412] NET: Registered protocol family 10
[ 1.893018] Segment Routing with IPv6
[ 1.893036] NET: Registered protocol family 17
[ 1.893043] Key type dns_resolver registered
[ 1.893265] RAS: Correctable Errors collector initialized.
[ 1.893310] microcode: CPU0: patch_level=0x010000c6
[ 1.893317] microcode: CPU1: patch_level=0x010000c6
[ 1.893323] microcode: CPU2: patch_level=0x010000c6
[ 1.893332] microcode: CPU3: patch_level=0x010000c6
[ 1.893366] microcode: Microcode Update Driver: v2.2.
[ 1.893374] sched_clock: Marking stable (1893362625, 0)->(2433306678, -539944053)
[ 1.893607] registered taskstats version 1
[ 1.893613] Loading compiled-in X.509 certificates
[ 1.896027] Loaded X.509 cert 'Build time autogenerated kernel key: ea5b2e3dc303efbb5e4e4f76f9dbd395fda5b554'
[ 1.896046] zswap: loaded using pool lzo/zbud
[ 1.899030] Key type big_key registered
[ 1.899033] Key type trusted registered
[ 1.900482] Key type encrypted registered
[ 1.900485] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.900488] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.900510] evm: HMAC attrs: 0x1
[ 1.900719] Magic number: 2:668:389
[ 1.900725] usb usb7: hash matches
[ 1.900811] rtc_cmos 00:02: setting system clock to 2018-01-29 16:21:11 UTC (1517242871)
[ 1.900906] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.901008] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.901009] EDD information not available.
[ 1.901031] PM: Hibernation image not present or could not be loaded.
[ 1.903920] Freeing unused kernel memory: 2364K
[ 1.903921] Write protecting the kernel read-only data: 18432k
[ 1.904737] Freeing unused kernel memory: 2024K
[ 1.904988] Freeing unused kernel memory: 92K
[ 1.906967] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.949608] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.949921] scsi host0: pata_jmicron
[ 1.950009] scsi host1: pata_jmicron
[ 1.950038] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[ 1.950039] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[ 1.951510] ahci 0000:00:11.0: version 3.0
[ 1.951707] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.951709] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.952694] scsi host2: ahci
[ 1.952791] scsi host3: ahci
[ 1.952861] scsi host4: ahci
[ 1.952927] scsi host5: ahci
[ 1.952991] scsi host6: ahci
[ 1.953054] scsi host7: ahci
[ 1.953087] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.953090] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.953091] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.953093] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.953095] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 1.953097] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 1.955865] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.955873] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.956211] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffa8cdc0685000, 00:24:1d:c2:91:36, XID 1c4000c0 IRQ 24
[ 1.956212] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.958561] scsi host8: pata_atiixp
[ 1.958646] scsi host9: pata_atiixp
[ 1.958683] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.958685] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.963327] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.963330] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.963598] scsi host10: ahci
[ 1.963698] scsi host11: ahci
[ 1.963732] ata11: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[ 1.963735] ata12: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[ 1.980668] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 2.002604] [drm] radeon kernel modesetting enabled.
[ 2.004753] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.004754] AMD IOMMUv2 functionality not available on this system
[ 2.008073] CRAT table not found
[ 2.008074] Finished initializing topology ret=0
[ 2.008090] kfd kfd: Initialized module
[ 2.008397] [drm] initializing kernel modesetting (RV770 0x1002:0x9460 0x1787:0x2281 0x00).
[ 2.008695] ATOM BIOS: RV790
[ 2.008717] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.008719] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.008721] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.008722] [drm] RAM width 256bits DDR
[ 2.008777] [TTM] Zone kernel: Available graphics memory: 2018094 kiB
[ 2.008777] [TTM] Initializing pool allocator
[ 2.008781] [TTM] Initializing DMA pool allocator
[ 2.008797] [drm] radeon: 1024M of VRAM memory ready
[ 2.008798] [drm] radeon: 1024M of GTT memory ready.
[ 2.008802] [drm] Loading RV770 Microcode
[ 2.008857] [drm] Internal thermal controller with fan control
[ 2.008883] [drm] radeon: power management initialized
[ 2.008931] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.010020] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 2.012250] [drm] PCIE GART of 1024M enabled (table at 0x0000000000146000).
[ 2.012273] radeon 0000:01:00.0: WB enabled
[ 2.012275] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff957cdfa5fc00
[ 2.012276] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff957cdfa5fc0c
[ 2.012634] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xffffa8cdc1016230
[ 2.012636] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.012636] [drm] Driver supports precise vblank timestamp query.
[ 2.012637] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.012670] radeon 0000:01:00.0: radeon: using MSI.
[ 2.012687] [drm] radeon: irq initialized.
[ 2.027672] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.058571] [drm] ring test on 0 succeeded in 1 usecs
[ 2.058575] [drm] ring test on 3 succeeded in 2 usecs
[ 2.172062] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 2.233206] [drm] ring test on 5 succeeded in 1 usecs
[ 2.233209] [drm] UVD initialized successfully.
[ 2.233287] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.233301] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.240063] tsc: Refined TSC clocksource calibration: 3020.058 MHz
[ 2.240069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b88499791d, max_idle_ns: 440795351520 ns
[ 2.270803] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.273100] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.278735] ata12: SATA link down (SStatus 0 SControl 300)
[ 2.279193] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.279246] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.282710] ata11: SATA link down (SStatus 0 SControl 300)
[ 2.364543] usb 5-3: New USB device found, idVendor=1532, idProduct=0012
[ 2.364545] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.364546] usb 5-3: Product: Razer Salmosa
[ 2.364547] usb 5-3: Manufacturer: Razer
[ 2.369797] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.376693] usbcore: registered new interface driver usbhid
[ 2.376694] usbhid: USB HID core driver
[ 2.378252] input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:1532:0012.0001/input/input3
[ 2.378355] hid-generic 0003:1532:0012.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:00:13.0-3/input0
[ 2.432472] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.435900] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 2.439712] ata3.00: configured for UDMA/100
[ 2.440472] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.447842] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[ 2.447844] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.454313] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
[ 2.455673] ata4.00: configured for UDMA/133
[ 2.489337] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.489338] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.489450] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.489505] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.489683] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 00E4 PQ: 0 ANSI: 5
[ 302.490679] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 302.490689] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 302.490699] sd 3:0:0:0: [sda] Write Protect is off
[ 302.490701] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 302.490718] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 302.525858] sda: sda1 sda2 sda3 sda4
[ 302.526336] sd 3:0:0:0: [sda] Attached SCSI disk
[ 302.878624] [drm] ib test on ring 5 succeeded
[ 302.878675] firewire_core 0000:04:0e.0: created device fw0: GUID 007c12800000241d, S400
[ 302.879047] [drm] Radeon Display Connectors
[ 302.879047] [drm] Connector 0:
[ 302.879048] [drm] DVI-I-1
[ 302.879048] [drm] HPD2
[ 302.879050] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 302.879050] [drm] Encoders:
[ 302.879051] [drm] DFP1: INTERNAL_UNIPHY
[ 302.879051] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 302.879052] [drm] Connector 1:
[ 302.879052] [drm] DIN-1
[ 302.879052] [drm] Encoders:
[ 302.879053] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 302.879053] [drm] Connector 2:
[ 302.879054] [drm] DVI-I-2
[ 302.879054] [drm] HPD1
[ 302.879055] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 302.879055] [drm] Encoders:
[ 302.879055] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 302.879056] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 302.969976] [drm] fb mappable at 0xD0347000
[ 302.969977] [drm] vram apper at 0xD0000000
[ 302.969978] [drm] size 8294400
[ 302.969978] [drm] fb depth is 24
[ 302.969978] [drm] pitch is 7680
[ 302.970054] fbcon: radeondrmfb (fb0) is primary device
[ 303.012847] Console: switching to colour frame buffer device 240x67
[ 303.019053] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 303.034574] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 303.034578] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 303.225079] usb 6-1: New USB device found, idVendor=1532, idProduct=010b
[ 303.225080] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 303.225082] usb 6-1: Product: Razer Arctosa
[ 303.225083] usb 6-1: Manufacturer: Razer
[ 303.230853] clocksource: Switched to clocksource tsc
[ 303.233316] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/0003:1532:010B.0002/input/input4
[ 303.290639] hid-generic 0003:1532:010B.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Razer Arctosa] on usb-0000:00:13.1-1/input0
[ 303.296315] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:1532:010B.0003/input/input5
[ 303.354625] hid-generic 0003:1532:010B.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Arctosa] on usb-0000:00:13.1-1/input1
[ 305.054595] floppy0: no floppy controllers found
[ 305.282402] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 306.241278] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 306.241404] systemd[1]: Detected architecture x86-64.
[ 306.252005] systemd[1]: Set hostname to <ana-comp>.
[ 306.680427] random: crng init done
[ 306.910052] systemd[1]: Created slice User and Session Slice.
[ 306.910131] systemd[1]: Listening on Journal Socket (/dev/log).
[ 306.910151] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 306.910259] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 306.910297] systemd[1]: Listening on udev Control Socket.
[ 306.910307] systemd[1]: Reached target User and Group Name Lookups.
[ 306.910338] systemd[1]: Listening on Journal Socket.
[ 307.722644] lp: driver loaded but no devices found
[ 307.822689] ppdev: user-space parallel port driver
[ 314.524086] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 314.531154] systemd-journald[272]: Received request to flush runtime journal from PID 1
[ 314.601503] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 314.626895] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170531/utaddress-247)
[ 314.626901] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 314.668544] kvm: Nested Virtualization enabled
[ 314.668546] kvm: Nested Paging enabled
[ 314.670261] MCE: In-kernel MCE decoding enabled.
[ 314.672298] EDAC amd64: Node 0: DRAM ECC disabled.
[ 314.672299] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 314.688113] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 314.723147] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
[ 314.725309] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 314.725311] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 314.725313] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 314.725314] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 314.725315] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 314.725315] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 314.725317] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 314.725318] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 314.725319] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 314.725320] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
[ 314.744793] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 314.744844] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 314.744885] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 314.744924] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 314.744964] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 314.745003] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 314.745043] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 314.745083] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 316.236442] Adding 1952764k swap on /dev/sda4. Priority:-1 extents:1 across:1952764k FS
[ 316.510765] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 317.150719] audit: type=1400 audit(1517242886.783:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=688 comm="apparmor_parser"
[ 317.150724] audit: type=1400 audit(1517242886.783:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=688 comm="apparmor_parser"
[ 317.171515] audit: type=1400 audit(1517242886.804:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=693 comm="apparmor_parser"
[ 317.171518] audit: type=1400 audit(1517242886.804:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=693 comm="apparmor_parser"
[ 317.202387] audit: type=1400 audit(1517242886.835:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=689 comm="apparmor_parser"
[ 317.202391] audit: type=1400 audit(1517242886.835:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=689 comm="apparmor_parser"
[ 317.202393] audit: type=1400 audit(1517242886.835:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=689 comm="apparmor_parser"
[ 317.202395] audit: type=1400 audit(1517242886.835:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=689 comm="apparmor_parser"
[ 317.208199] audit: type=1400 audit(1517242886.841:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=694 comm="apparmor_parser"
[ 317.210458] audit: type=1400 audit(1517242886.843:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=692 comm="apparmor_parser"
[ 317.854604] floppy0: no floppy controllers found
[ 321.502722] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 321.519870] r8169 0000:03:00.0 enp3s0: link down
[ 321.519877] r8169 0000:03:00.0 enp3s0: link down
[ 321.519914] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 323.152251] r8169 0000:03:00.0 enp3s0: link up
[ 323.152259] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes readyHors ligne
#10 Le 29/01/2018, à 18:38
- Wusha
Re : Boot d'Ubuntu anormalement long
la deuxième
Startup finished in 5.976s (kernel) + 22.700s (userspace) = 28.676sDernière modification par Wusha (Le 29/01/2018, à 18:39)
Hors ligne
#11 Le 29/01/2018, à 18:48
- Wusha
Re : Boot d'Ubuntu anormalement long
et la troisième
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @22.041s
└─multi-user.target @22.041s
└─getty.target @22.041s
└─getty@tty1.service @22.037s
└─rc-local.service @22.030s +3ms
└─network-online.target @22.028s
└─NetworkManager-wait-online.service @13.771s +8.257s
└─NetworkManager.service @11.640s +2.129s
└─dbus.service @11.341s
└─basic.target @11.329s
└─sockets.target @11.329s
└─snapd.socket @11.323s +2ms
└─sysinit.target @11.304s
└─apparmor.service @10.572s +731ms
└─local-fs.target @10.570s
└─home.mount @10.487s +81ms
└─systemd-fsck@dev-disk-by\x2duuid-28dd97ff\x2d0b4
└─dev-disk-by\x2duuid-28dd97ff\x2d0b45\x2d4b29\x
lines 1-21/21 (END)En revanche ce qui est bizarre c'est qu'a la fin de la troisième commande il ne me remet pas la possibilité de retaper une commande (je n'ai pas la ligne x@x: ~$
Hors ligne
#12 Le 29/01/2018, à 20:00
- moko138
Re : Boot d'Ubuntu anormalement long
Wusha a écrit :
/dev/sda2: clean, 230917/9158656 files, 1888854/36621568 blocksJ'en déduis donc que c'est bien une vérification des disques
Non, c'est la marque de la fin d'un fsck (Linux) appliqué à une partition linux.
En l'espèce, c'est ta racine, notée "/" (sd.2).
/!\ À retenir :
Windows appelle ça un "disque", mais c'est
une des N partitions (sda2)
du disque sda.
Si ton système lance une vérification de ta / à chaque démarrage - le confirmes-tu ? -, il y a un problème à identifier.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 29/01/2018, à 20:38
- Wusha
Re : Boot d'Ubuntu anormalement long
Alors je recommence parce que cette fois-ci il a mit beaucoup plus de temps
alors première commande
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
[ 0.000000] Linux version 4.13.0-32-generic (buildd@lgw01-amd64-004) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 (Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfc90fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfcf3000-0x00000000cfcfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 5 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 3325M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfc91 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff97a2400f5440]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff97a240092000] 92000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0xc692a000, 0xc692afff] PGTABLE
[ 0.000000] BRK [0xc692b000, 0xc692bfff] PGTABLE
[ 0.000000] BRK [0xc692c000, 0xc692cfff] PGTABLE
[ 0.000000] BRK [0xc692d000, 0xc692dfff] PGTABLE
[ 0.000000] BRK [0xc692e000, 0xc692efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3223a000-0x35114fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6E70 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CFCF3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CFCF3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CFCF30C0 00725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFCF0000 000040
[ 0.000000] ACPI: SSDT 0x00000000CFCFA400 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFCFACC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CFCFAD00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 0x00000000CFCFA340 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12ffd3000-0x12fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000097fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfc90fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1047592
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13235 pages used for memmap
[ 0.000000] DMA32 zone: 846993 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfc91000-0xcfceffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfcf3000-0xcfcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff97a36fc00000 s146520 r8192 d29608 u262144
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031200
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xfbfe000000-0xfbffffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc0000000-0xc3ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc3ffffff]
[ 0.000000] Memory: 3917740K/4190368K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 272628K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 37823 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 3020.143 MHz processor
[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6040.28 BogoMIPS (lpj=12080572)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] ACPI: Core revision 20170531
[ 0.008000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.008000] Security Framework initialized
[ 0.008000] Yama: becoming mindful.
[ 0.008000] AppArmor: AppArmor initialized
[ 0.012376] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012967] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012994] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.013014] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.013215] FEATURE SPEC_CTRL Not Present
[ 0.013215] FEATURE IBPB Not Present
[ 0.013216] Disabling indirect branch predictor support
[ 0.013217] CPU: Physical Processor ID: 0
[ 0.013217] CPU: Processor Core ID: 0
[ 0.013219] mce: CPU supports 6 MCE banks
[ 0.013224] LVT offset 0 assigned for vector 0xf9
[ 0.013226] process: using AMD E400 aware idle routine
[ 0.013228] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.013228] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.013346] Freeing SMP alternatives memory: 36K
[ 0.016010] process: System has AMD C1E enabled
[ 0.016097] smpboot: Max logical packages: 2
[ 0.016622] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060000] process: Switch to broadcast mode on CPU0
[ 0.060000] smpboot: CPU0: AMD Phenom(tm) II X4 945 Processor (family: 0x10, model: 0x4, stepping: 0x2)
[ 0.060000] Performance Events: AMD PMU driver.
[ 0.060000] ... version: 0
[ 0.060000] ... bit width: 48
[ 0.060000] ... generic registers: 4
[ 0.060000] ... value mask: 0000ffffffffffff
[ 0.060000] ... max period: 00007fffffffffff
[ 0.060000] ... fixed-purpose events: 0
[ 0.060000] ... event mask: 000000000000000f
[ 0.060000] Hierarchical SRCU implementation.
[ 0.060000] smp: Bringing up secondary CPUs ...
[ 0.060000] x86: Booting SMP configuration:
[ 0.060000] .... node #0, CPUs: #1
[ 0.004000] process: Switch to broadcast mode on CPU1
[ 0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060000] #2
[ 0.004000] process: Switch to broadcast mode on CPU2
[ 0.060072] #3
[ 0.004000] process: Switch to broadcast mode on CPU3
[ 0.064025] smp: Brought up 1 node, 4 CPUs
[ 0.064025] smpboot: Total of 4 processors activated (24161.14 BogoMIPS)
[ 0.068282] devtmpfs: initialized
[ 0.068282] x86/mm: Memory block size: 128MB
[ 0.068389] evm: security.selinux
[ 0.068390] evm: security.SMACK64
[ 0.068390] evm: security.SMACK64EXEC
[ 0.068390] evm: security.SMACK64TRANSMUTE
[ 0.068391] evm: security.SMACK64MMAP
[ 0.068391] evm: security.ima
[ 0.068391] evm: security.capability
[ 0.068411] PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf2fff] (12288 bytes)
[ 0.068411] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.068411] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.068411] pinctrl core: initialized pinctrl subsystem
[ 0.068411] RTC time: 18:07:13, date: 01/29/18
[ 0.068411] NET: Registered protocol family 16
[ 0.068490] cpuidle: using governor ladder
[ 0.068490] cpuidle: using governor menu
[ 0.068490] PCCT header not found.
[ 0.068490] node 0 link 0: io port [b000, ffff]
[ 0.068490] TOM: 00000000d0000000 aka 3328M
[ 0.068490] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.068490] node 0 link 0: mmio [a0000, bffff]
[ 0.068490] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.068490] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.068490] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[ 0.068490] TOM2: 0000000130000000 aka 4864M
[ 0.068490] bus: [bus 00-04] on node 0 link 0
[ 0.068490] bus: 00 [io 0x0000-0xffff]
[ 0.068490] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.068490] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.068490] bus: 00 [mem 0xe0500000-0xffffffff]
[ 0.068490] bus: 00 [mem 0xe0100000-0xe04fffff]
[ 0.068490] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.068490] ACPI: bus type PCI registered
[ 0.068490] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.068490] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.068490] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.068490] PCI: Using configuration type 1 for base access
[ 0.072039] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072073] ACPI: Added _OSI(Module Device)
[ 0.072074] ACPI: Added _OSI(Processor Device)
[ 0.072075] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072075] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.075771] ACPI: Interpreter enabled
[ 0.076021] ACPI: (supports S0 S3 S4 S5)
[ 0.076022] ACPI: Using IOAPIC for interrupt routing
[ 0.076075] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.076188] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.078807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.078811] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.078815] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.078815] PCI host bridge to bus 0000:00
[ 0.078815] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.078815] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.078815] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.078815] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.078815] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
[ 0.078815] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.078815] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[ 0.078815] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 0.078815] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.078815] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.078815] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
[ 0.078815] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.078815] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.078815] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.078815] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.078815] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.078815] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.078815] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.078815] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.078815] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.078815] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.078815] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.078815] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.078815] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.078815] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.078815] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.078815] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.078815] pci 0000:00:12.2: supports D1 D2
[ 0.078815] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.078815] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.078815] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.078815] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.078815] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.078815] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.078815] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.078815] pci 0000:00:13.2: supports D1 D2
[ 0.078815] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.078815] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.078815] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.078815] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.078815] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.078815] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.078815] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.078815] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.078815] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.078815] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.078815] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.078815] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.078815] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.078815] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.078815] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.078815] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.078815] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.078815] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.078815] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[ 0.078815] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.078815] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.078815] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.078815] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.078815] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.078815] pci 0000:01:00.0: [1002:9460] type 00 class 0x030000
[ 0.078815] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.078815] pci 0000:01:00.0: reg 0x18: [mem 0xfdee0000-0xfdeeffff 64bit]
[ 0.078815] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
[ 0.078815] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.078815] pci 0000:01:00.0: supports D1 D2
[ 0.078815] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[ 0.078824] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 0.078879] pci 0000:01:00.1: supports D1 D2
[ 0.092015] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.092017] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.092019] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.092022] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.092056] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601
[ 0.092126] pci 0000:02:00.0: reg 0x24: [mem 0xfddfe000-0xfddfffff]
[ 0.092177] pci 0000:02:00.0: PME# supported from D3hot
[ 0.092219] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.092238] pci 0000:02:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.092245] pci 0000:02:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.092252] pci 0000:02:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.092259] pci 0000:02:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.092266] pci 0000:02:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.092338] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.092344] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.092346] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.092348] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.092350] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.092382] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.092402] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff]
[ 0.092420] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.092432] pci 0000:03:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.092439] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.092495] pci 0000:03:00.0: supports D1 D2
[ 0.092496] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.104012] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.104015] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.104016] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.104019] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.104070] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.104096] pci 0000:04:0e.0: reg 0x10: [mem 0xfdbff000-0xfdbff7ff]
[ 0.104107] pci 0000:04:0e.0: reg 0x14: [mem 0xfdbf8000-0xfdbfbfff]
[ 0.104195] pci 0000:04:0e.0: supports D1 D2
[ 0.104196] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.104251] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.104254] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.104257] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.104260] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.104261] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.104262] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.104264] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.104265] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.104266] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
[ 0.104471] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104510] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104548] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104584] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104621] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104657] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104693] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.104730] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.105261] SCSI subsystem initialized
[ 0.105274] libata version 3.00 loaded.
[ 0.105274] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.105274] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.105274] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.105274] vgaarb: loaded
[ 0.105274] ACPI: bus type USB registered
[ 0.105274] usbcore: registered new interface driver usbfs
[ 0.105274] usbcore: registered new interface driver hub
[ 0.105274] usbcore: registered new device driver usb
[ 0.105274] EDAC MC: Ver: 3.0.0
[ 0.105274] PCI: Using ACPI for IRQ routing
[ 0.110265] PCI: pci_cache_line_size set to 64 bytes
[ 0.110322] e820: reserve RAM buffer [mem 0x00098400-0x0009ffff]
[ 0.110323] e820: reserve RAM buffer [mem 0xcfc91000-0xcfffffff]
[ 0.110400] NetLabel: Initializing
[ 0.110400] NetLabel: domain hash size = 128
[ 0.110401] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.110413] NetLabel: unlabeled traffic allowed by default
[ 0.112038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.112038] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.116004] clocksource: Switched to clocksource hpet
[ 0.126727] VFS: Disk quotas dquot_6.6.0
[ 0.126746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.126845] AppArmor: AppArmor Filesystem Enabled
[ 0.126885] pnp: PnP ACPI init
[ 0.126985] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.126987] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.126988] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.126991] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127212] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.127218] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.127239] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.127241] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.127242] system 00:01: [io 0x040b] has been reserved
[ 0.127243] system 00:01: [io 0x04d6] has been reserved
[ 0.127244] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.127245] system 00:01: [io 0x0c14] has been reserved
[ 0.127247] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.127248] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.127249] system 00:01: [io 0x0c6f] has been reserved
[ 0.127250] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.127251] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.127253] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.127254] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.127255] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.127256] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.127257] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.127259] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.127260] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.127262] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127376] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.127620] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.127685] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.127688] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127811] system 00:05: [mem 0x000d8400-0x000dbfff] has been reserved
[ 0.127813] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.127814] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.127815] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.127816] system 00:05: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
[ 0.127818] system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.127819] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.127820] system 00:05: [mem 0x00100000-0xcfceffff] could not be reserved
[ 0.127821] system 00:05: [mem 0xcfd00000-0xcfdfffff] has been reserved
[ 0.127823] system 00:05: [mem 0xcfe00000-0xcfefffff] could not be reserved
[ 0.127824] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.127825] system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.127826] system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.127828] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.127843] pnp: PnP ACPI: found 6 devices
[ 0.134590] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.134613] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.134615] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.134617] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.134619] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.134620] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.134623] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.134624] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.134626] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.134628] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.134631] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
[ 0.134632] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.134634] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.134635] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.134637] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.134640] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.134642] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.134646] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.134649] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.134655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.134656] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.134657] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.134658] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.134659] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.134661] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.134662] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.134663] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.134664] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.134665] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.134666] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.134667] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.134668] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.134669] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.134671] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.134672] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.134673] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.134674] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.134675] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.134676] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.134677] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.134678] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.134737] NET: Registered protocol family 2
[ 0.134891] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.134979] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.135115] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.135170] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.135194] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.135254] NET: Registered protocol family 1
[ 0.536531] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.536535] pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.536538] pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.536545] PCI: CLS 64 bytes, default 64
[ 0.536582] Unpacking initramfs...
[ 1.216050] Freeing initrd memory: 47980K
[ 1.216811] PCI-DMA: Disabling AGP.
[ 1.216895] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 1.216895] PCI-DMA: using GART IOMMU.
[ 1.216897] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.219724] LVT offset 1 assigned for vector 0x400
[ 1.219730] IBS: LVT offset 1 assigned
[ 1.219857] perf: AMD IBS detected (0x0000001f)
[ 1.219905] Scanning for low memory corruption every 60 seconds
[ 1.220193] audit: initializing netlink subsys (disabled)
[ 1.220283] audit: type=2000 audit(1517249233.220:1): state=initialized audit_enabled=0 res=1
[ 1.220537] Initialise system trusted keyrings
[ 1.220547] Key type blacklist registered
[ 1.220582] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.221694] zbud: loaded
[ 1.222068] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.222240] fuse init (API version 7.26)
[ 1.224307] Key type asymmetric registered
[ 1.224308] Asymmetric key parser 'x509' registered
[ 1.224344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.224400] io scheduler noop registered
[ 1.224400] io scheduler deadline registered
[ 1.224425] io scheduler cfq registered (default)
[ 1.225131] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.225140] ACPI: Power Button [PWRB]
[ 1.225172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.225214] ACPI: Power Button [PWRF]
[ 1.225236] ACPI: ACPI: processor limited to max C-state 1
[ 1.225378] GHES: HEST is not enabled!
[ 1.225456] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.245998] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.247435] Linux agpgart interface v0.103
[ 1.248877] loop: module loaded
[ 1.249068] libphy: Fixed MDIO Bus: probed
[ 1.249068] tun: Universal TUN/TAP device driver, 1.6
[ 1.249101] PPP generic driver version 2.4.2
[ 1.249141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.249143] ehci-pci: EHCI PCI platform driver
[ 1.249277] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.249283] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.249287] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.249296] ehci-pci 0000:00:12.2: debug port 1
[ 1.249340] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.264453] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.264490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.264491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.264492] usb usb1: Product: EHCI Host Controller
[ 1.264493] usb usb1: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[ 1.264494] usb usb1: SerialNumber: 0000:00:12.2
[ 1.264585] hub 1-0:1.0: USB hub found
[ 1.264590] hub 1-0:1.0: 6 ports detected
[ 1.264818] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.264823] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.264825] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.264833] ehci-pci 0000:00:13.2: debug port 1
[ 1.264870] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.280447] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.280475] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.280476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280477] usb usb2: Product: EHCI Host Controller
[ 1.280478] usb usb2: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[ 1.280479] usb usb2: SerialNumber: 0000:00:13.2
[ 1.280555] hub 2-0:1.0: USB hub found
[ 1.280559] hub 2-0:1.0: 6 ports detected
[ 1.280667] ehci-platform: EHCI generic platform driver
[ 1.280674] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.280676] ohci-pci: OHCI PCI platform driver
[ 1.280773] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.280777] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.280804] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.344466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.344467] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.344468] usb usb3: Product: OHCI PCI host controller
[ 1.344469] usb usb3: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.344470] usb usb3: SerialNumber: 0000:00:12.0
[ 1.344574] hub 3-0:1.0: USB hub found
[ 1.344580] hub 3-0:1.0: 3 ports detected
[ 1.344766] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.344770] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.344783] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.408452] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.408454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.408455] usb usb4: Product: OHCI PCI host controller
[ 1.408456] usb usb4: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.408456] usb usb4: SerialNumber: 0000:00:12.1
[ 1.408569] hub 4-0:1.0: USB hub found
[ 1.408575] hub 4-0:1.0: 3 ports detected
[ 1.408777] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.408782] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.408811] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.472446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.472447] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.472448] usb usb5: Product: OHCI PCI host controller
[ 1.472449] usb usb5: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.472450] usb usb5: SerialNumber: 0000:00:13.0
[ 1.472546] hub 5-0:1.0: USB hub found
[ 1.472552] hub 5-0:1.0: 3 ports detected
[ 1.472739] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.472743] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.472755] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.536450] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.536452] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.536452] usb usb6: Product: OHCI PCI host controller
[ 1.536453] usb usb6: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.536454] usb usb6: SerialNumber: 0000:00:13.1
[ 1.536548] hub 6-0:1.0: USB hub found
[ 1.536555] hub 6-0:1.0: 3 ports detected
[ 1.536741] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.536745] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.536757] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.600450] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.600451] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600452] usb usb7: Product: OHCI PCI host controller
[ 1.600453] usb usb7: Manufacturer: Linux 4.13.0-32-generic ohci_hcd
[ 1.600454] usb usb7: SerialNumber: 0000:00:14.5
[ 1.600548] hub 7-0:1.0: USB hub found
[ 1.600554] hub 7-0:1.0: 2 ports detected
[ 1.600640] ohci-platform: OHCI generic platform driver
[ 1.600648] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.600688] i8042: PNP: No PS/2 controller found.
[ 1.600689] i8042: Probing ports directly.
[ 1.608048] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 1.633308] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.633309] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.765741] usb 2-2: New USB device found, idVendor=050d, idProduct=615a
[ 1.765743] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.765744] usb 2-2: Product: Play Wireless USB Adapter
[ 1.765745] usb 2-2: Manufacturer: Belkin Wireless Networks
[ 1.765746] usb 2-2: SerialNumber: 0
[ 1.888507] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.888603] mousedev: PS/2 mouse device common for all mice
[ 1.888733] rtc_cmos 00:02: RTC can wake from S4
[ 1.888838] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.888869] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.888873] i2c /dev entries driver
[ 1.888910] device-mapper: uevent: version 1.0.3
[ 1.888972] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.889063] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.889433] NET: Registered protocol family 10
[ 1.892976] Segment Routing with IPv6
[ 1.892991] NET: Registered protocol family 17
[ 1.892998] Key type dns_resolver registered
[ 1.893216] RAS: Correctable Errors collector initialized.
[ 1.893260] microcode: CPU0: patch_level=0x010000c6
[ 1.893268] microcode: CPU1: patch_level=0x010000c6
[ 1.893276] microcode: CPU2: patch_level=0x010000c6
[ 1.893283] microcode: CPU3: patch_level=0x010000c6
[ 1.893317] microcode: Microcode Update Driver: v2.2.
[ 1.893325] sched_clock: Marking stable (1893313736, 0)->(2445004895, -551691159)
[ 1.893567] registered taskstats version 1
[ 1.893573] Loading compiled-in X.509 certificates
[ 1.895985] Loaded X.509 cert 'Build time autogenerated kernel key: ea5b2e3dc303efbb5e4e4f76f9dbd395fda5b554'
[ 1.896032] zswap: loaded using pool lzo/zbud
[ 1.899105] Key type big_key registered
[ 1.899109] Key type trusted registered
[ 1.900599] Key type encrypted registered
[ 1.900603] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.900606] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.900625] evm: HMAC attrs: 0x1
[ 1.900833] Magic number: 2:124:141
[ 1.900876] acpi device:12: hash matches
[ 1.900925] rtc_cmos 00:02: setting system clock to 2018-01-29 18:07:15 UTC (1517249235)
[ 1.901023] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.901125] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.901125] EDD information not available.
[ 1.901147] PM: Hibernation image not present or could not be loaded.
[ 1.904077] Freeing unused kernel memory: 2364K
[ 1.904078] Write protecting the kernel read-only data: 18432k
[ 1.904887] Freeing unused kernel memory: 2024K
[ 1.905143] Freeing unused kernel memory: 92K
[ 1.907115] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.952385] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.952394] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.952763] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffbe54c0645000, 00:24:1d:c2:91:36, XID 1c4000c0 IRQ 24
[ 1.952765] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.952775] ahci 0000:00:11.0: version 3.0
[ 1.952990] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.952992] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.953665] scsi host0: ahci
[ 1.956762] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.957048] scsi host1: ahci
[ 1.957150] scsi host3: ahci
[ 1.957239] scsi host4: ahci
[ 1.957319] scsi host5: ahci
[ 1.957401] scsi host6: ahci
[ 1.957435] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.957437] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.957439] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.957441] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.957442] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 1.957444] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 1.958071] scsi host2: pata_jmicron
[ 1.960887] scsi host7: pata_jmicron
[ 1.960925] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[ 1.960926] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[ 1.961037] scsi host8: pata_atiixp
[ 1.961138] scsi host9: pata_atiixp
[ 1.961167] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.961168] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.971117] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.971120] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.972233] scsi host10: ahci
[ 1.972329] scsi host11: ahci
[ 1.972365] ata11: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[ 1.972367] ata12: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[ 1.977368] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.995516] [drm] radeon kernel modesetting enabled.
[ 1.997660] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.997661] AMD IOMMUv2 functionality not available on this system
[ 2.001100] CRAT table not found
[ 2.001101] Finished initializing topology ret=0
[ 2.001115] kfd kfd: Initialized module
[ 2.001448] [drm] initializing kernel modesetting (RV770 0x1002:0x9460 0x1787:0x2281 0x00).
[ 2.001758] ATOM BIOS: RV790
[ 2.001782] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.001783] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.001785] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.001786] [drm] RAM width 256bits DDR
[ 2.001847] [TTM] Zone kernel: Available graphics memory: 2018094 kiB
[ 2.001848] [TTM] Initializing pool allocator
[ 2.001851] [TTM] Initializing DMA pool allocator
[ 2.001867] [drm] radeon: 1024M of VRAM memory ready
[ 2.001868] [drm] radeon: 1024M of GTT memory ready.
[ 2.001872] [drm] Loading RV770 Microcode
[ 2.001932] [drm] Internal thermal controller with fan control
[ 2.001960] [drm] radeon: power management initialized
[ 2.002019] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.003133] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 2.016737] [drm] PCIE GART of 1024M enabled (table at 0x0000000000146000).
[ 2.016760] radeon 0000:01:00.0: WB enabled
[ 2.016761] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff97a35f9c7c00
[ 2.016763] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff97a35f9c7c0c
[ 2.017121] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xffffbe54c1016230
[ 2.017122] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.017122] [drm] Driver supports precise vblank timestamp query.
[ 2.017123] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.017154] radeon 0000:01:00.0: radeon: using MSI.
[ 2.017172] [drm] radeon: irq initialized.
[ 2.063002] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.063017] [drm] ring test on 0 succeeded in 0 usecs
[ 2.063021] [drm] ring test on 3 succeeded in 2 usecs
[ 2.176034] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 2.237652] [drm] ring test on 5 succeeded in 1 usecs
[ 2.237655] [drm] UVD initialized successfully.
[ 2.237737] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.237751] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.240049] tsc: Refined TSC clocksource calibration: 3020.059 MHz
[ 2.240055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b884a84740, max_idle_ns: 440795316179 ns
[ 2.274412] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.274477] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.278628] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.278664] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.294632] ata12: SATA link down (SStatus 0 SControl 300)
[ 2.294667] ata11: SATA link down (SStatus 0 SControl 300)
[ 2.454959] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.454984] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.458581] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 2.462405] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[ 2.462407] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.463085] ata1.00: configured for UDMA/100
[ 2.470419] ata2.00: configured for UDMA/133
[ 2.476790] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
[ 2.513215] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.513216] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.513337] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.513404] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.513630] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 00E4 PQ: 0 ANSI: 5
[ 2.552583] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.552600] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.552619] sd 1:0:0:0: [sda] Write Protect is off
[ 2.552621] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.552646] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.558956] usb 5-3: New USB device found, idVendor=1532, idProduct=0012
[ 2.558958] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.558959] usb 5-3: Product: Razer Salmosa
[ 2.558960] usb 5-3: Manufacturer: Razer
[ 2.563960] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.594224] sda: sda1 sda2 sda3 sda4
[ 2.594685] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.660116] usbcore: registered new interface driver usbhid
[ 2.660117] usbhid: USB HID core driver
[ 2.661709] input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:1532:0012.0001/input/input3
[ 2.661817] hid-generic 0003:1532:0012.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:00:13.0-3/input0
[ 2.912505] [drm] ib test on ring 5 succeeded
[ 2.912579] firewire_core 0000:04:0e.0: created device fw0: GUID 007c12800000241d, S400
[ 2.912909] [drm] Radeon Display Connectors
[ 2.912910] [drm] Connector 0:
[ 2.912910] [drm] DVI-I-1
[ 2.912911] [drm] HPD2
[ 2.912912] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.912913] [drm] Encoders:
[ 2.912913] [drm] DFP1: INTERNAL_UNIPHY
[ 2.912914] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.912914] [drm] Connector 1:
[ 2.912914] [drm] DIN-1
[ 2.912915] [drm] Encoders:
[ 2.912915] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.912915] [drm] Connector 2:
[ 2.912916] [drm] DVI-I-2
[ 2.912916] [drm] HPD1
[ 2.912917] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 2.912917] [drm] Encoders:
[ 2.912917] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.912918] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 3.003885] [drm] fb mappable at 0xD0347000
[ 3.003886] [drm] vram apper at 0xD0000000
[ 3.003886] [drm] size 8294400
[ 3.003887] [drm] fb depth is 24
[ 3.003887] [drm] pitch is 7680
[ 3.003961] fbcon: radeondrmfb (fb0) is primary device
[ 3.046750] Console: switching to colour frame buffer device 240x67
[ 3.052968] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.068477] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 3.095407] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 3.264554] clocksource: Switched to clocksource tsc
[ 3.282956] usb 6-1: New USB device found, idVendor=1532, idProduct=010b
[ 3.282958] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.282959] usb 6-1: Product: Razer Arctosa
[ 3.282960] usb 6-1: Manufacturer: Razer
[ 3.291198] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/0003:1532:010B.0002/input/input4
[ 3.348530] hid-generic 0003:1532:010B.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Razer Arctosa] on usb-0000:00:13.1-1/input0
[ 3.354198] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:1532:010B.0003/input/input5
[ 3.412515] hid-generic 0003:1532:010B.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Arctosa] on usb-0000:00:13.1-1/input1
[ 5.088491] floppy0: no floppy controllers found
[ 5.647872] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.599343] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.599468] systemd[1]: Detected architecture x86-64.
[ 6.610239] systemd[1]: Set hostname to <ana-comp>.
[ 6.940372] random: crng init done
[ 7.276750] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.276803] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.276811] systemd[1]: Reached target Remote File Systems.
[ 7.276845] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.276876] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 7.276983] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.277018] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.014210] lp: driver loaded but no devices found
[ 8.027308] ppdev: user-space parallel port driver
[ 9.037499] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.943695] systemd-journald[271]: Received request to flush runtime journal from PID 1
[ 16.048841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.100679] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170531/utaddress-247)
[ 16.100684] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.121532] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 16.129257] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
[ 16.134909] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 16.134911] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.134913] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.134914] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 16.134915] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 16.134916] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 16.134917] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 16.134918] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 16.134919] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 16.134920] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
[ 16.147385] kvm: Nested Virtualization enabled
[ 16.147388] kvm: Nested Paging enabled
[ 16.150880] MCE: In-kernel MCE decoding enabled.
[ 16.152377] EDAC amd64: Node 0: DRAM ECC disabled.
[ 16.152378] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 16.155813] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 16.155858] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 16.155900] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 16.155940] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 16.155979] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 16.156129] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 16.156174] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 16.156215] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 316.799641] INFO: rcu_sched self-detected stall on CPU
[ 316.799657] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 316.799658] clocksource: 'hpet' wd_now: edae8cf wd_last: ecca7b8 mask: ffffffff
[ 316.799659] clocksource: 'tsc' cs_now: f05ea599f8 cs_last: 1d6629e1f4 mask: ffffffffffffffff
[ 316.799662] tsc: Marking TSC unstable due to clocksource watchdog
[ 316.799680] 0-...: (1 ticks this GP) idle=996/1/0 softirq=1449/1449 fqs=0
[ 316.799700] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 316.799702] sched_clock: Marking unstable (316799708244, -9064)<-(317351390762, -551691159)
[ 316.799717] (t=74992 jiffies g=347 c=346 q=344)
[ 316.799720] NMI backtrace for cpu 0
[ 316.799723] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0-32-generic #35~16.04.1-Ubuntu
[ 316.799723] Hardware name: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 316.799724] Call Trace:
[ 316.799726] <IRQ>
[ 316.799732] dump_stack+0x63/0x8b
[ 316.799734] nmi_cpu_backtrace+0xcb/0xd0
[ 316.799737] ? irq_force_complete_move+0x140/0x140
[ 316.799738] nmi_trigger_cpumask_backtrace+0xef/0x140
[ 316.799740] arch_trigger_cpumask_backtrace+0x19/0x20
[ 316.799742] rcu_dump_cpu_stacks+0x9f/0xe0
[ 316.799743] rcu_check_callbacks+0x7b0/0x8f0
[ 316.799745] ? update_wall_time+0x46e/0x730
[ 316.799748] ? tick_sched_do_timer+0x40/0x40
[ 316.799749] update_process_times+0x2f/0x60
[ 316.799750] tick_sched_handle+0x2a/0x60
[ 316.799751] tick_sched_timer+0x39/0x80
[ 316.799752] __hrtimer_run_queues+0xe5/0x230
[ 316.799754] hrtimer_interrupt+0xb1/0x200
[ 316.799756] smp_trace_apic_timer_interrupt+0x63/0x90
[ 316.799757] smp_apic_timer_interrupt+0xe/0x10
[ 316.799758] apic_timer_interrupt+0x1af/0x1c0
[ 316.799759] </IRQ>
[ 316.799761] RIP: 0010:native_safe_halt+0x6/0x10
[ 316.799761] RSP: 0018:ffffffffbb003de8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[ 316.799763] RAX: 0000000000000000 RBX: ffffffffbb012480 RCX: 0000000000000020
[ 316.799763] RDX: 0000000000000000 RSI: ffffffffbb037540 RDI: ffffffffbb006a40
[ 316.799764] RBP: ffffffffbb003de8 R08: 0000000000000101 R09: 0000000000000002
[ 316.799764] R10: ffffffffbb003d98 R11: 0000000000000000 R12: 0000000000000000
[ 316.799765] R13: ffffffffbb012480 R14: 0000000000000000 R15: 0000000000000000
[ 316.799767] default_idle+0x1e/0x100
[ 316.799769] amd_e400_idle+0x23/0x50
[ 316.799771] arch_cpu_idle+0xf/0x20
[ 316.799772] default_idle_call+0x23/0x30
[ 316.799773] do_idle+0x172/0x1f0
[ 316.799774] cpu_startup_entry+0x73/0x80
[ 316.799776] rest_init+0xb8/0xc0
[ 316.799779] start_kernel+0x4e3/0x504
[ 316.799781] ? early_idt_handler_array+0x120/0x120
[ 316.799782] x86_64_start_reservations+0x24/0x26
[ 316.799783] x86_64_start_kernel+0x140/0x163
[ 316.799785] secondary_startup_64+0x9f/0xa0
[ 316.799789] Sending NMI from CPU 0 to CPUs 1:
[ 316.799794] NMI backtrace for cpu 1
[ 316.799797] CPU: 1 PID: 34 Comm: kworker/1:1 Not tainted 4.13.0-32-generic #35~16.04.1-Ubuntu
[ 316.799797] Hardware name: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 316.799803] Workqueue: events __sched_clock_work
[ 316.799804] task: ffff97a36a5a4200 task.stack: ffffbe54c0798000
[ 316.799807] RIP: 0010:smp_call_function_many+0x208/0x260
[ 316.799808] RSP: 0018:ffffbe54c079bca0 EFLAGS: 00000202
[ 316.799809] RAX: 0000000000000003 RBX: 0000000000000008 RCX: 0000000000000000
[ 316.799810] RDX: ffff97a36fc27250 RSI: 0000000000000008 RDI: ffff97a36b028af0
[ 316.799810] RBP: ffffbe54c079bcd8 R08: 0000000000000000 R09: 000000000000000d
[ 316.799811] R10: fffff9b1449a8880 R11: ffff97a36b028af0 R12: ffffffffb9e33270
[ 316.799811] R13: 0000000000000000 R14: ffff97a36fc63a00 R15: 0000000000000008
[ 316.799812] FS: 0000000000000000(0000) GS:ffff97a36fc40000(0000) knlGS:0000000000000000
[ 316.799813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 316.799814] CR2: 000056153ec2efe0 CR3: 0000000128680000 CR4: 00000000000006e0
[ 316.799814] Call Trace:
[ 316.799819] ? sched_clock_idle_wakeup_event+0x40/0x40
[ 316.799821] ? arch_unregister_cpu+0x30/0x30
[ 316.799823] ? sched_clock_tick_stable+0x1/0x40
[ 316.799824] on_each_cpu+0x2d/0x60
[ 316.799825] ? sched_clock_idle_wakeup_event+0x40/0x40
[ 316.799827] text_poke_bp+0x6a/0xf0
[ 316.799828] ? sched_clock_idle_wakeup_event+0x40/0x40
[ 316.799829] __jump_label_transform.isra.0+0x13f/0x180
[ 316.799831] arch_jump_label_transform+0x32/0x50
[ 316.799833] __jump_label_update+0x76/0x90
[ 316.799834] jump_label_update+0x57/0xb0
[ 316.799835] __static_key_slow_dec+0x4e/0xa0
[ 316.799837] static_key_slow_dec+0x22/0x50
[ 316.799838] static_key_disable+0x21/0x30
[ 316.799840] __sched_clock_work+0xbe/0xd0
[ 316.799842] process_one_work+0x156/0x410
[ 316.799843] worker_thread+0x4b/0x460
[ 316.799845] kthread+0x109/0x140
[ 316.799846] ? process_one_work+0x410/0x410
[ 316.799847] ? kthread_create_on_node+0x70/0x70
[ 316.799850] ret_from_fork+0x1f/0x30
[ 316.799851] Code: 6f 8c 35 00 3b 05 cd a9 34 01 89 c1 0f 8d 86 fe ff ff 48 98 49 8b 16 48 03 14 c5 e0 03 f7 ba 8b 42 18 a8 01 74 09 f3 90 8b 42 18 <a8> 01 75 f7 eb be 0f b6 4d d0 4c 89 ea 4c 89 e6 44 89 f7 e8 10
[ 316.799993] INFO: rcu_sched self-detected stall on CPU
[ 316.799995] 1-...: (1 ticks this GP) idle=a42/140000000000001/0 softirq=1694/1694 fqs=1
[ 316.799995] (t=74992 jiffies g=347 c=346 q=407)
[ 316.800784] Sending NMI from CPU 0 to CPUs 2:
[ 316.800789] NMI backtrace for cpu 2
[ 316.800791] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.13.0-32-generic #35~16.04.1-Ubuntu
[ 316.800792] Hardware name: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 316.800793] task: ffff97a36a480000 task.stack: ffffbe54c0718000
[ 316.800798] RIP: 0010:native_queued_spin_lock_slowpath+0x17a/0x1a0
[ 316.800799] RSP: 0018:ffffbe54c071bdd0 EFLAGS: 00000002
[ 316.800800] RAX: 0000000000080101 RBX: 0000000000000246 RCX: 0000000000000001
[ 316.800801] RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffffffffbb0a7280
[ 316.800801] RBP: ffffbe54c071bdd0 R08: 0000000000000101 R09: 00000000fffffff4
[ 316.800802] R10: 0000000000000000 R11: 00000000000269a8 R12: ffffffffbb0a7280
[ 316.800803] R13: ffffffffbb0a7280 R14: ffffbe54c071be10 R15: ffff97a36a480000
[ 316.800804] FS: 0000000000000000(0000) GS:ffff97a36fc80000(0000) knlGS:0000000000000000
[ 316.800804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 316.800805] CR2: 00005590280e5fe0 CR3: 00000001287fe000 CR4: 00000000000006e0
[ 316.800805] Call Trace:
[ 316.800811] _raw_spin_lock_irqsave+0x37/0x3f
[ 316.800813] rcu_process_callbacks+0x382/0x4f0
[ 316.800815] ? put_task_stack+0x78/0xf0
[ 316.800816] ? finish_task_switch+0x18d/0x200
[ 316.800818] __do_softirq+0xed/0x278
[ 316.800820] run_ksoftirqd+0x29/0x60
[ 316.800822] smpboot_thread_fn+0x10a/0x160
[ 316.800823] kthread+0x109/0x140
[ 316.800824] ? sort_range+0x30/0x30
[ 316.800825] ? kthread_create_on_node+0x70/0x70
[ 316.800827] ret_from_fork+0x1f/0x30
[ 316.800828] Code: 41 39 c0 74 e6 4d 85 c9 c6 07 01 74 30 41 c7 41 08 01 00 00 00 e9 51 ff ff ff 83 fa 01 0f 84 af fe ff ff 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 5d c3 f3 90 4c 8b 09
[ 316.801779] Sending NMI from CPU 1 to CPUs 0:
[ 316.801783] NMI backtrace for cpu 0
[ 316.801784] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0-32-generic #35~16.04.1-Ubuntu
[ 316.801785] Hardware name: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 316.801785] task: ffffffffbb012480 task.stack: ffffffffbb000000
[ 316.801787] RIP: 0010:native_queued_spin_lock_slowpath+0x12c/0x1a0
[ 316.801788] RSP: 0018:ffff97a36fc03e30 EFLAGS: 00000002
[ 316.801789] RAX: 0000000000000001 RBX: 0000000000000046 RCX: ffff97a36fc23600
[ 316.801789] RDX: 00000000000c0001 RSI: 0000000000080100 RDI: ffffffffbb0a7280
[ 316.801790] RBP: ffff97a36fc03e30 R08: 0000000000040000 R09: 0000000000000000
[ 316.801790] R10: 0000000000000000 R11: ffff97a36fdd85e0 R12: ffffffffbb0a7280
[ 316.801791] R13: 0000000000000000 R14: ffffffffbb012480 R15: ffffffffbb0a7280
[ 316.801792] FS: 0000000000000000(0000) GS:ffff97a36fc00000(0000) knlGS:0000000000000000
[ 316.801792] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 316.801793] CR2: 00007f2cc8710624 CR3: 000000012a22a000 CR4: 00000000000006f0
[ 316.801794] Call Trace:
[ 316.801794] <IRQ>
[ 316.801796] _raw_spin_lock_irqsave+0x37/0x3f
[ 316.801797] rcu_check_callbacks+0x7b8/0x8f0
[ 316.801798] ? update_wall_time+0x46e/0x730
[ 316.801800] ? tick_sched_do_timer+0x40/0x40
[ 316.801801] update_process_times+0x2f/0x60
[ 316.801802] tick_sched_handle+0x2a/0x60
[ 316.801803] tick_sched_timer+0x39/0x80
[ 316.801804] __hrtimer_run_queues+0xe5/0x230
[ 316.801806] hrtimer_interrupt+0xb1/0x200
[ 316.801807] smp_trace_apic_timer_interrupt+0x63/0x90
[ 316.801808] smp_apic_timer_interrupt+0xe/0x10
[ 316.801809] apic_timer_interrupt+0x1af/0x1c0
[ 316.801809] </IRQ>
[ 316.801810] RIP: 0010:native_safe_halt+0x6/0x10
[ 316.801811] RSP: 0018:ffffffffbb003de8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[ 316.801812] RAX: 0000000000000000 RBX: ffffffffbb012480 RCX: 0000000000000020
[ 316.801812] RDX: 0000000000000000 RSI: ffffffffbb037540 RDI: ffffffffbb006a40
[ 316.801813] RBP: ffffffffbb003de8 R08: 0000000000000101 R09: 0000000000000002
[ 316.801813] R10: ffffffffbb003d98 R11: 0000000000000000 R12: 0000000000000000
[ 316.801814] R13: ffffffffbb012480 R14: 0000000000000000 R15: 0000000000000000
[ 316.801816] default_idle+0x1e/0x100
[ 316.801817] amd_e400_idle+0x23/0x50
[ 316.801818] arch_cpu_idle+0xf/0x20
[ 316.801819] default_idle_call+0x23/0x30
[ 316.801820] do_idle+0x172/0x1f0
[ 316.801821] cpu_startup_entry+0x73/0x80
[ 316.801822] rest_init+0xb8/0xc0
[ 316.801824] start_kernel+0x4e3/0x504
[ 316.801825] ? early_idt_handler_array+0x120/0x120
[ 316.801826] x86_64_start_reservations+0x24/0x26
[ 316.801827] x86_64_start_kernel+0x140/0x163
[ 316.801829] secondary_startup_64+0x9f/0xa0
[ 316.801830] Code: 48 03 14 c5 e0 03 f7 ba 48 89 0a 8b 41 08 85 c0 75 09 f3 90 8b 41 08 85 c0 74 f7 4c 8b 09 4d 85 c9 74 08 41 0f 0d 09 eb 02 f3 90 <8b> 17 66 85 d2 75 f7 be 01 00 00 00 eb 10 89 d0 f0 0f b1 37 39
[ 316.802775] NMI backtrace for cpu 1
[ 316.802776] CPU: 1 PID: 34 Comm: kworker/1:1 Not tainted 4.13.0-32-generic #35~16.04.1-Ubuntu
[ 316.802777] Hardware name: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
[ 316.802778] Workqueue: events __sched_clock_work
[ 316.802779] Call Trace:
[ 316.802780] <IRQ>
[ 316.802781] dump_stack+0x63/0x8b
[ 316.802783] nmi_cpu_backtrace+0xcb/0xd0
[ 316.802785] ? irq_force_complete_move+0x140/0x140
[ 316.802786] nmi_trigger_cpumask_backtrace+0xef/0x140
[ 316.802788] arch_trigger_cpumask_backtrace+0x19/0x20
[ 316.802789] rcu_dump_cpu_stacks+0x9f/0xe0
[ 316.802791] rcu_check_callbacks+0x7b0/0x8f0
[ 316.802792] ? account_system_index_time+0x63/0x70
[ 316.802793] ? account_system_time+0x45/0x60
[ 316.802795] ? tick_sched_do_timer+0x40/0x40
[ 316.802797] update_process_times+0x2f/0x60
[ 316.802798] tick_sched_handle+0x2a/0x60
[ 316.802800] tick_sched_timer+0x39/0x80
[ 316.802801] __hrtimer_run_queues+0xe5/0x230
[ 316.802802] hrtimer_interrupt+0xb1/0x200
[ 316.802804] smp_trace_apic_timer_interrupt+0x63/0x90
[ 316.802805] ? arch_unregister_cpu+0x30/0x30
[ 316.802806] smp_apic_timer_interrupt+0xe/0x10
[ 316.802807] apic_timer_interrupt+0x1af/0x1c0
[ 316.802807] </IRQ>
[ 316.802808] RIP: 0010:smp_call_function_many+0x205/0x260
[ 316.802809] RSP: 0018:ffffbe54c079bca0 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff10
[ 316.802810] RAX: 0000000000000003 RBX: 0000000000000008 RCX: 0000000000000000
[ 316.802810] RDX: ffff97a36fc27250 RSI: 0000000000000008 RDI: ffff97a36b028af0
[ 316.802811] RBP: ffffbe54c079bcd8 R08: 0000000000000000 R09: 000000000000000d
[ 316.802812] R10: fffff9b1449a8880 R11: ffff97a36b028af0 R12: ffffffffb9e33270
[ 316.802812] R13: 0000000000000000 R14: ffff97a36fc63a00 R15: 0000000000000008
[ 316.802813] ? arch_unregister_cpu+0x30/0x30
[ 316.802815] ? sched_clock_idle_wakeup_event+0x40/0x40
[ 316.802816] ? arch_unregister_cpu+0x30/0x30
[ 316.802818] ? sched_clock_tick_stable+0x1/0x40
[ 316.802819] on_each_cpu+0x2d/0x60
[ 316.802820] ? sched_clock_idle_wakeup_event+0x40/0x40
[ 316.802821] text_poke_bp+0x6a/0xf0
[ 316.802822] ? sched_clock_idle_wakeup_event+0x40/0x40
[ 316.802824] __jump_label_transform.isra.0+0x13f/0x180
[ 316.802825] arch_jump_label_transform+0x32/0x50
[ 316.802826] __jump_label_update+0x76/0x90
[ 316.802828] jump_label_update+0x57/0xb0
[ 316.802829] __static_key_slow_dec+0x4e/0xa0
[ 316.802830] static_key_slow_dec+0x22/0x50
[ 316.802832] static_key_disable+0x21/0x30
[ 316.802833] __sched_clock_work+0xbe/0xd0
[ 316.802834] process_one_work+0x156/0x410
[ 316.802836] worker_thread+0x4b/0x460
[ 316.802837] kthread+0x109/0x140
[ 316.802838] ? process_one_work+0x410/0x410
[ 316.802839] ? kthread_create_on_node+0x70/0x70
[ 316.802840] ret_from_fork+0x1f/0x30
[ 316.803176] clocksource: Switched to clocksource hpet
[ 316.806626] floppy0: no floppy controllers found
[ 318.011209] Adding 1952764k swap on /dev/sda4. Priority:-1 extents:1 across:1952764k FS
[ 319.132187] audit: type=1400 audit(1517249552.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=699 comm="apparmor_parser"
[ 319.132190] audit: type=1400 audit(1517249552.731:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=699 comm="apparmor_parser"
[ 319.139136] audit: type=1400 audit(1517249552.738:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=700 comm="apparmor_parser"
[ 319.139140] audit: type=1400 audit(1517249552.738:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
[ 319.139142] audit: type=1400 audit(1517249552.738:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=700 comm="apparmor_parser"
[ 319.139145] audit: type=1400 audit(1517249552.738:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
[ 319.181192] audit: type=1400 audit(1517249552.780:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=708 comm="apparmor_parser"
[ 319.181195] audit: type=1400 audit(1517249552.780:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=708 comm="apparmor_parser"
[ 319.182026] audit: type=1400 audit(1517249552.781:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=703 comm="apparmor_parser"
[ 319.182029] audit: type=1400 audit(1517249552.781:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=703 comm="apparmor_parser"
[ 319.243894] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 369.397567] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 369.409665] r8169 0000:03:00.0 enp3s0: link down
[ 369.409667] r8169 0000:03:00.0 enp3s0: link down
[ 369.409701] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 371.088936] r8169 0000:03:00.0 enp3s0: link up
[ 371.088944] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 382.932475] CE: hpet increased min_delta_ns to 20115 nsecDeuxieme commande
Startup finished in 6.312s (kernel) + 5min 13.529s (userspace) = 5min 19.841sTroisième commande
graphical.target @6min 2.628sEt oui je confirme qu'il me fait ça a chaque fois
Dernière modification par Wusha (Le 29/01/2018, à 20:39)
Hors ligne
#14 Le 29/01/2018, à 20:47
- malbo
Re : Boot d'Ubuntu anormalement long
Cet extrait du dmesg du post #9 est bizarre :
[ 2.489683] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 00E4 PQ: 0 ANSI: 5
[ 302.490679] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 302.490689] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)La première ligne s'intéresse au disque sda ainsi que les lignes suivantes sauf qu'il y a un trou de 300 secondes.
Je te prie de vérifier le disque dur sda en faisant ce que j'explique dans ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280
Hors ligne
#15 Le 29/01/2018, à 21:18
- Wusha
Re : Boot d'Ubuntu anormalement long
Voilà le résultat de la vérification du disque dur
sudo smartctl -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-32-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F3
Device Model: SAMSUNG HD103SJ
Serial Number: S246JDWSC49382
LU WWN Device Id: 5 0024e9 002a6f4a1
Firmware Version: 1AJ100E4
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jan 29 20:11:29 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9180) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 13
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 078 072 025 Pre-fail Always - 6913
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2073
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 1
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 21349
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2095
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 055 000 Old_age Always - 27 (Min/Max 5/45)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 2
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 137
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2104
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Après c'est un peu aléatoire, parfois il met 5 min, parfois 30... je ne comprends pas...
Hors ligne
#16 Le 30/01/2018, à 08:29
- malbo
Re : Boot d'Ubuntu anormalement long
Pour moi, les données SMART que tu as collées dans le post #15 sont correctes. Je pense que ce disque dur fonctionne bien. C'était une fausse piste.
Dernière modification par malbo (Le 30/01/2018, à 08:30)
Hors ligne
#17 Le 30/01/2018, à 09:33
- moko138
Re : Boot d'Ubuntu anormalement long
+1
N'as-tu pas des bips au démarrage ?
Si oui, combien et à quel rythme (bref bref long, ou autre) ?
Si non, je te prie d'appliquer ./viewtopic.php?id=1958451
et pendant quelques temps, de chronométrer les démarrages en distinguant :
- durée entre la mise sous tension et le bip de grub
- puis durée entre le bip de grub et l'arrivée sur le bureau de windows et d'ubuntu.
(Ce n'est pas à 3 secondes près : il s"agit de disposer d'ordres de grandeur).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#18 Le 30/01/2018, à 10:30
- ??
Re : Boot d'Ubuntu anormalement long
Bonjour.
Je pense qu'il y a un CPU qui déconne....à moins d'un gros problème bios.
79].......
[ 16.156174] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 16.156215] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 316.799641] INFO: rcu_sched self-detected stall on CPU
[ 316.799657] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 316.799658] clocksource: 'hpet' wd_now: edae8cf wd_last: ecca7b8 mask: ffffffff
[ 316.799659] clocksource: 'tsc' cs_now: f05ea599f8 cs_last: 1d6629e1f4 mask: ffffffffffffffff
[ 316.799662] tsc: Marking TSC unstable due to clocksource watchdog
[ 316.799680] 0-...: (1 ticks this GP) idle=996/1/0 softirq=1449/1449 fqs=0
[ 316.799700] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.https://en.m.wikipedia.org/wiki/Time_Stamp_Counter#Use
the CPU speed may change because of power-saving measures taken by the OS or BIOS, or the system may be hibernated and later resumed
Un test à faire en ajoutant ces deux options noioapic nolapic juste après quiet splash dans le fichier /boot/grub/grub.cfg c'est vers les lignes 150.
bios modifié pour permettre le changement dynamique de cadencement?
Dernière modification par ?? (Le 30/01/2018, à 16:39)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#19 Le 30/01/2018, à 10:53
- LeJediGris
Re : Boot d'Ubuntu anormalement long
Salut
Effectivement un vieux PB qui pue le BIOS/PB Hard...
Sur le dmesg je note:
GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010Or il n'existe pas de Bios F8g pour ta carte maman, voir ici.
On pourrais essayer un update BIOS sur le F8 (ou sur le F9 si tu es joueur car il est en beta version depuis 2012.. donc à toi de voir mais sans doute risqué !!)
En tout cas c'est une piste.
Ceci dit (Edit): Si tu n'as pas le PB avec W$ c'est curieux mais ça peut peut-être s'expliquer par les différences fondamentales en le kernel Linux et le kernel NT.
A+
Dernière modification par LeJediGris (Le 30/01/2018, à 10:55)
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#20 Le 30/01/2018, à 11:03
- LukePerp
Re : Boot d'Ubuntu anormalement long
à wusha : avec un chronomètre, donne nous la durée entre l'allumage de la machine et l'affichage du menu grub.
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#21 Le 30/01/2018, à 11:11
- moko138
Re : Boot d'Ubuntu anormalement long
LukePerp,
Ne te fatigue pas : je l'ai déjà demandé (entre autres choses).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 30/01/2018, à 14:13
- Wusha
Re : Boot d'Ubuntu anormalement long
J'ai bien lu toutes vos demandes, mais je ne peux pas tester avant ce soir. Dès que je suis chez moi je fais tout ça.
Sinon je n'ai absolument pas de problème avec Windows. Si c'est un problème de BiOS euh... c'est grave? Avant l'installation d'Ubuntu mon ordi fonctionnait très bien.
Et au cas où il faudrait en arriver là, ça ne me dérange pas de désinstaller/réinstaller Linux, il n'y a encore rien dessus pour le moment. Voire de formater Windows si c'est nécessaire
Hors ligne
#23 Le 30/01/2018, à 15:15
- LeJediGris
Re : Boot d'Ubuntu anormalement long
Wusha a écrit :
J'ai bien lu toutes vos demandes, mais je ne peux pas tester avant ce soir. Dès que je suis chez moi je fais tout ça.
Sinon je n'ai absolument pas de problème avec Windows. Si c'est un problème de BiOS euh... c'est grave? Avant l'installation d'Ubuntu mon ordi fonctionnait très bien.
Et au cas où il faudrait en arriver là, ça ne me dérange pas de désinstaller/réinstaller Linux, il n'y a encore rien dessus pour le moment. Voire de formater Windows si c'est nécessaire
Re-
C'est possible, regarde donc dans le menu BIOS quelle est ta version exacte (et dis-le nous !!)
A+
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#24 Le 30/01/2018, à 16:24
- ??
Re : Boot d'Ubuntu anormalement long
C'est une ligne de ce style près de la position 147, elle contient
linux /boot/vmlinuz-4.4.0-112-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro quiet splash $vt_handoffIl faut que tu lui ajoutes les deux options pour qu'elle devienne
linux /boot/vmlinuz-4.4.0-112-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro quiet splash noioapic nolapic $vt_handoffTu sauvegardes et verras bien au boot suivant, c'est encore pareil tu feras aussi cet essai
linux /boot/vmlinuz-4.4.0-112-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro quiet splash noapic $vt_handoffTu sauvegardes et verras bien au boot suivant, c'est encore pareil tu feras aussi cet essai
linux /boot/vmlinuz-4.4.0-112-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro quiet splash acpi=off $vt_handoffsinon ? https://doc.ubuntu-fr.org/kernel#exempl … oyau_linux
Dernière modification par ?? (Le 30/01/2018, à 16:33)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#25 Le 30/01/2018, à 16:51
- moko138
Re : Boot d'Ubuntu anormalement long
??;
Quand tu écris
noioapic nolapic n'y aurait-il pas une faute de frappe ? C'est la première fois que je lis "noiapic", avec un i comme Indépendance.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne