Pages : 1
#1 Le 19/05/2018, à 13:48
- fred1234
Démarrage lent sou 18.04 LTS - RESOLU
Bonjour,
Comme dit dans le titre, j'ai environ 1mn 30 de démarrage aussi j'ai lancé un boot-info dont voici le lien,
http://paste.ubuntu.com/p/2SNJgxJT9X/
Merci de votre aide
Dernière modification par fred1234 (Le 10/07/2022, à 14:18)
Hors ligne
#2 Le 20/05/2018, à 07:48
- LukePerp
Re : Démarrage lent sou 18.04 LTS - RESOLU
Bonjour, peux tu redémarrer ta machine, puis dès que tu pourras, ouvres immédiatement le terminal et donnes nous le retour de cette commande :
dmesgPuis donnes le retour de ces commandes COMPLET :
sudo systemd-analyze
sudo systemd-analyze blame
sudo systemd-analyze critical-chainDernière modification par LukePerp (Le 20/05/2018, à 07:49)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Ethereum user
Hors ligne
#3 Le 20/05/2018, à 09:46
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 4.15.0-21-generic (buildd@lgw01-amd64-042) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #22-Ubuntu SMP Tue May 1 13:26:51 UTC 2018 (Ubuntu 4.15.0-21.22-generic 4.15.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21-generic root=UUID=08f5845f-9eba-47c4-804c-667a5d557d55 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion VN433AA-ABF p6235fr/Eureka3, BIOS 5.14 11/13/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 1B0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 000000000 mask E00000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 6144M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x0c33e000, 0x0c33efff] PGTABLE
[ 0.000000] BRK [0x0c33f000, 0x0c33ffff] PGTABLE
[ 0.000000] BRK [0x0c340000, 0x0c340fff] PGTABLE
[ 0.000000] BRK [0x0c341000, 0x0c341fff] PGTABLE
[ 0.000000] BRK [0x0c342000, 0x0c342fff] PGTABLE
[ 0.000000] BRK [0x0c343000, 0x0c343fff] PGTABLE
[ 0.000000] BRK [0x0c344000, 0x0c344fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31353000-0x349a0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F95A0 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFF90000 000044 (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFF90200 000084 (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFF90440 005753 (v01 HPQOEM SLIC-CPC 00000050 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFF9E000 000040
[ 0.000000] ACPI: APIC 0x00000000CFF90390 00006C (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFF90400 00003C (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFF9E040 000076 (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFF95BA0 000038 (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFF9E0C0 002024 (v01 HPQOEM SLIC-CPC 20091113 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFA00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFA11A0 000A7C (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1affd1000-0x1afffbfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001afffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff8ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001afffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001afffffff]
[ 0.000000] On node 0 totalpages: 1572654
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847760 pages, LIFO batch:31
[ 0.000000] Normal zone: 11264 pages used for memmap
[ 0.000000] Normal zone: 720896 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1548058
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21-generic root=UUID=08f5845f-9eba-47c4-804c-667a5d557d55 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6041740K/6290616K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 248876K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39065 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration failed
[ 0.028000] tsc: PIT calibration matches HPET. 1 loops
[ 0.028000] tsc: Detected 2493.725 MHz processor
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.45 BogoMIPS (lpj=9974900)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.032980] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034998] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.035091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.035156] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.035452] CPU: Physical Processor ID: 0
[ 0.035453] CPU: Processor Core ID: 0
[ 0.035455] mce: CPU supports 6 MCE banks
[ 0.035461] CPU0: Thermal monitoring enabled (TM2)
[ 0.035463] process: using mwait in idle threads
[ 0.035468] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.035469] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.035471] Spectre V2 : Mitigation: Full generic retpoline
[ 0.035608] Freeing SMP alternatives memory: 36K
[ 0.044000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.044000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.044000] ... version: 2
[ 0.044000] ... bit width: 40
[ 0.044000] ... generic registers: 2
[ 0.044000] ... value mask: 000000ffffffffff
[ 0.044000] ... max period: 000000007fffffff
[ 0.044000] ... fixed-purpose events: 3
[ 0.044000] ... event mask: 0000000700000003
[ 0.044000] Hierarchical SRCU implementation.
[ 0.044000] smp: Bringing up secondary CPUs ...
[ 0.044000] x86: Booting SMP configuration:
[ 0.044000] .... node #0, CPUs: #1
[ 0.048111] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.048136] #2 #3
[ 0.064092] smp: Brought up 1 node, 4 CPUs
[ 0.064092] smpboot: Max logical packages: 1
[ 0.064092] smpboot: Total of 4 processors activated (19949.80 BogoMIPS)
[ 0.066495] devtmpfs: initialized
[ 0.068023] x86/mm: Memory block size: 128MB
[ 0.068838] evm: security.selinux
[ 0.068839] evm: security.SMACK64
[ 0.068839] evm: security.SMACK64EXEC
[ 0.068840] evm: security.SMACK64TRANSMUTE
[ 0.068841] evm: security.SMACK64MMAP
[ 0.068841] evm: security.apparmor
[ 0.068842] evm: security.ima
[ 0.068843] evm: security.capability
[ 0.068861] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
[ 0.068861] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.068861] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.068861] pinctrl core: initialized pinctrl subsystem
[ 0.068861] RTC time: 8:10:24, date: 05/20/18
[ 0.068861] NET: Registered protocol family 16
[ 0.068861] audit: initializing netlink subsys (disabled)
[ 0.068861] audit: type=2000 audit(1526803824.068:1): state=initialized audit_enabled=0 res=1
[ 0.068861] cpuidle: using governor ladder
[ 0.068861] cpuidle: using governor menu
[ 0.068861] ACPI: bus type PCI registered
[ 0.068861] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.068861] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.068861] PCI: not using MMCONFIG
[ 0.068861] PCI: Using configuration type 1 for base access
[ 0.072036] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072141] ACPI: Added _OSI(Module Device)
[ 0.072142] ACPI: Added _OSI(Processor Device)
[ 0.072143] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072144] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072397] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.076315] ACPI: Dynamic OEM Table Load:
[ 0.076321] ACPI: SSDT 0xFFFF8EE5E7CCA800 00022C (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.076632] ACPI: Dynamic OEM Table Load:
[ 0.076638] ACPI: SSDT 0xFFFF8EE5E827E800 0004B2 (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
[ 0.077250] ACPI: Dynamic OEM Table Load:
[ 0.077256] ACPI: SSDT 0xFFFF8EE5E7CC8400 00022C (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.077478] ACPI: Dynamic OEM Table Load:
[ 0.077483] ACPI: SSDT 0xFFFF8EE5E7CC20C0 000085 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
[ 0.077908] ACPI: Dynamic OEM Table Load:
[ 0.077913] ACPI: SSDT 0xFFFF8EE5E7CCA000 00022C (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.078135] ACPI: Dynamic OEM Table Load:
[ 0.078139] ACPI: SSDT 0xFFFF8EE5E7CC2A80 000085 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
[ 0.078564] ACPI: Dynamic OEM Table Load:
[ 0.078569] ACPI: SSDT 0xFFFF8EE5E7CCB800 00022C (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.078796] ACPI: Dynamic OEM Table Load:
[ 0.078800] ACPI: SSDT 0xFFFF8EE5E7CC2780 000085 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
[ 0.080007] ACPI: Interpreter enabled
[ 0.080007] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.080007] ACPI: Using IOAPIC for interrupt routing
[ 0.080007] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.080870] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.080884] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.081116] ACPI: Enabled 11 GPEs in block 00 to 3F
[ 0.090158] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.090165] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.090438] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.090707] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.090721] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.091110] PCI host bridge to bus 0000:00
[ 0.091113] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.091115] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.091117] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.091118] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.091120] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window]
[ 0.091121] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfed8ffff window]
[ 0.091123] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.091133] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.091155] DMAR: Forcing write-buffer flush capability
[ 0.091155] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.091257] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.091295] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.091419] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.091459] pci 0000:00:1a.0: reg 0x20: [io 0xc000-0xc01f]
[ 0.091593] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.091632] pci 0000:00:1a.1: reg 0x20: [io 0xc080-0xc09f]
[ 0.091773] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.091813] pci 0000:00:1a.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.091958] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.091978] pci 0000:00:1a.7: reg 0x10: [mem 0xfceff400-0xfceff7ff]
[ 0.092057] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.092164] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.092183] pci 0000:00:1b.0: reg 0x10: [mem 0xfcef8000-0xfcefbfff 64bit]
[ 0.092248] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.092352] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.092415] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.092530] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.092597] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.092711] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.092750] pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f]
[ 0.092883] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.092922] pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.093055] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.093094] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
[ 0.093233] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.093253] pci 0000:00:1d.7: reg 0x10: [mem 0xfceff800-0xfceffbff]
[ 0.093328] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.093432] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.093573] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[ 0.093763] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.093778] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.093785] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.093791] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.093798] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.093804] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.093811] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.093820] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.093822] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.093823] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.093825] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.093939] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.093956] pci 0000:00:1f.3: reg 0x10: [mem 0xfceffc00-0xfceffcff 64bit]
[ 0.093973] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.094116] pci 0000:04:00.0: [10de:0a20] type 00 class 0x030000
[ 0.094131] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.094139] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.094148] pci 0000:04:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.094154] pci 0000:04:00.0: reg 0x24: [io 0xec00-0xec7f]
[ 0.094161] pci 0000:04:00.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.094166] pci 0000:04:00.0: enabling Extended Tags
[ 0.094252] pci 0000:04:00.1: [10de:0be2] type 00 class 0x040300
[ 0.094265] pci 0000:04:00.1: reg 0x10: [mem 0xfebfc000-0xfebfffff]
[ 0.094297] pci 0000:04:00.1: enabling Extended Tags
[ 0.094388] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.094391] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.094393] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.094396] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.094439] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.094500] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.094527] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.094552] pci 0000:02:00.0: reg 0x18: [mem 0xfcfff000-0xfcffffff 64bit]
[ 0.094568] pci 0000:02:00.0: reg 0x20: [mem 0xddffc000-0xddffffff 64bit pref]
[ 0.094579] pci 0000:02:00.0: reg 0x30: [mem 0xfcfc0000-0xfcfdffff pref]
[ 0.094657] pci 0000:02:00.0: supports D1 D2
[ 0.094659] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.104023] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.104026] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.104030] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.104035] pci 0000:00:1c.5: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.104111] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.104120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.104122] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.104124] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.104126] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.104128] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff window] (subtractive decode)
[ 0.104131] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfed8ffff window] (subtractive decode)
[ 0.104830] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.104923] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.105012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.105102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.105195] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.105286] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.105378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.105469] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.105859] SCSI subsystem initialized
[ 0.105880] libata version 3.00 loaded.
[ 0.105880] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[ 0.105880] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.105880] pci 0000:04:00.0: vgaarb: bridge control possible
[ 0.105880] vgaarb: loaded
[ 0.105880] ACPI: bus type USB registered
[ 0.105880] usbcore: registered new interface driver usbfs
[ 0.105880] usbcore: registered new interface driver hub
[ 0.105880] usbcore: registered new device driver usb
[ 0.105880] EDAC MC: Ver: 3.0.0
[ 0.105880] PCI: Using ACPI for IRQ routing
[ 0.105880] PCI: pci_cache_line_size set to 64 bytes
[ 0.105880] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.105880] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
[ 0.108003] NetLabel: Initializing
[ 0.108003] NetLabel: domain hash size = 128
[ 0.108003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.108003] NetLabel: unlabeled traffic allowed by default
[ 0.108079] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.108083] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.108088] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.110104] clocksource: Switched to clocksource hpet
[ 0.125503] VFS: Disk quotas dquot_6.6.0
[ 0.125525] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.125669] AppArmor: AppArmor Filesystem Enabled
[ 0.125705] pnp: PnP ACPI init
[ 0.125823] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.125825] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.125831] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.125926] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.126179] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.126181] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.126183] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.126186] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.126188] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.126190] system 00:02: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.126195] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126345] system 00:03: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.126350] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126529] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.126531] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.126537] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126715] system 00:05: [io 0x0a00-0x0adf] has been reserved
[ 0.126720] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126807] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.126812] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127094] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.127097] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.127099] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.127101] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.127103] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.127108] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.127306] pnp: PnP ACPI: found 8 devices
[ 0.135747] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.135765] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.135768] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.135770] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.135788] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.135793] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.135795] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.135799] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.135801] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.135804] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.135806] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.135810] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.135812] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.135816] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.135819] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.135824] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.135826] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.135830] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.135833] pci 0000:00:1c.5: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.135838] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.135847] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.135849] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.135851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.135852] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.135854] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff window]
[ 0.135856] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfed8ffff window]
[ 0.135857] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.135859] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfebfffff]
[ 0.135861] pci_bus 0000:04: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
[ 0.135863] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.135864] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.135866] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.135867] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.135869] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.135871] pci_bus 0000:02: resource 2 [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.135872] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.135874] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.135876] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.135878] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.135879] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff window]
[ 0.135881] pci_bus 0000:01: resource 9 [mem 0xf4000000-0xfed8ffff window]
[ 0.135974] NET: Registered protocol family 2
[ 0.136293] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.136501] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.136799] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.136869] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.136917] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.137042] NET: Registered protocol family 1
[ 0.138380] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.138390] PCI: CLS 32 bytes, default 64
[ 0.138449] Unpacking initramfs...
[ 1.075122] Freeing initrd memory: 55608K
[ 1.075157] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.075161] software IO TLB [mem 0xcbf90000-0xcff90000] (64MB) mapped at [000000006dcedd04-000000003c9238b2]
[ 1.075411] Scanning for low memory corruption every 60 seconds
[ 1.076158] Initialise system trusted keyrings
[ 1.076169] Key type blacklist registered
[ 1.076271] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.077999] zbud: loaded
[ 1.078575] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.078830] fuse init (API version 7.26)
[ 1.081253] Key type asymmetric registered
[ 1.081255] Asymmetric key parser 'x509' registered
[ 1.081300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.081381] io scheduler noop registered
[ 1.081382] io scheduler deadline registered
[ 1.081445] io scheduler cfq registered (default)
[ 1.081853] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.082215] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 1.082252] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[ 1.082273] pcieport 0000:00:1c.5: Signaling PME with IRQ 26
[ 1.082359] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.082359] vesafb: scrolling: redraw
[ 1.082361] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.082375] vesafb: framebuffer at 0xdf000000, mapped to 0x000000008bc29c38, using 1216k, total 1216k
[ 1.082510] Console: switching to colour frame buffer device 80x30
[ 1.082522] fb0: VESA VGA frame buffer device
[ 1.082538] intel_idle: does not run on family 6 model 23
[ 1.082641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.082652] ACPI: Power Button [PWRB]
[ 1.082697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.082742] ACPI: Power Button [PWRF]
[ 1.082898] Monitor-Mwait will be used to enter C-1 state
[ 1.082902] Monitor-Mwait will be used to enter C-2 state
[ 1.082904] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.083953] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.087314] Linux agpgart interface v0.103
[ 1.089635] loop: module loaded
[ 1.089788] ata_piix 0000:00:1f.2: version 2.13
[ 1.089913] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.091421] scsi host0: ata_piix
[ 1.091561] scsi host1: ata_piix
[ 1.091611] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.091615] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 1.091741] libphy: Fixed MDIO Bus: probed
[ 1.091742] tun: Universal TUN/TAP device driver, 1.6
[ 1.091806] PPP generic driver version 2.4.2
[ 1.091886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.091890] ehci-pci: EHCI PCI platform driver
[ 1.092043] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.092050] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.092061] ehci-pci 0000:00:1a.7: debug port 1
[ 1.095951] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 1.095965] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfceff400
[ 1.108033] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.108085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.108088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.108090] usb usb1: Product: EHCI Host Controller
[ 1.108092] usb usb1: Manufacturer: Linux 4.15.0-21-generic ehci_hcd
[ 1.108094] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.108247] hub 1-0:1.0: USB hub found
[ 1.108255] hub 1-0:1.0: 6 ports detected
[ 1.108516] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.108522] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.108532] ehci-pci 0000:00:1d.7: debug port 1
[ 1.112429] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.112442] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfceff800
[ 1.128024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.128066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.128069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128071] usb usb2: Product: EHCI Host Controller
[ 1.128073] usb usb2: Manufacturer: Linux 4.15.0-21-generic ehci_hcd
[ 1.128075] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.128200] hub 2-0:1.0: USB hub found
[ 1.128217] hub 2-0:1.0: 6 ports detected
[ 1.128380] ehci-platform: EHCI generic platform driver
[ 1.128395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.128398] ohci-pci: OHCI PCI platform driver
[ 1.128409] ohci-platform: OHCI generic platform driver
[ 1.128416] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.128510] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.128518] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.128524] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.128547] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
[ 1.128593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.128595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128597] usb usb3: Product: UHCI Host Controller
[ 1.128599] usb usb3: Manufacturer: Linux 4.15.0-21-generic uhci_hcd
[ 1.128600] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.128722] hub 3-0:1.0: USB hub found
[ 1.128729] hub 3-0:1.0: 2 ports detected
[ 1.128913] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.128918] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.128923] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.128947] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c080
[ 1.128989] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.128991] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128993] usb usb4: Product: UHCI Host Controller
[ 1.128994] usb usb4: Manufacturer: Linux 4.15.0-21-generic uhci_hcd
[ 1.128996] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.129123] hub 4-0:1.0: USB hub found
[ 1.129129] hub 4-0:1.0: 2 ports detected
[ 1.129317] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.129321] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.129327] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.129351] uhci_hcd 0000:00:1a.2: irq 20, io base 0x0000c400
[ 1.129393] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.129395] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.129397] usb usb5: Product: UHCI Host Controller
[ 1.129399] usb usb5: Manufacturer: Linux 4.15.0-21-generic uhci_hcd
[ 1.129400] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.129522] hub 5-0:1.0: USB hub found
[ 1.129529] hub 5-0:1.0: 2 ports detected
[ 1.129702] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.129707] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.129712] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.129729] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 1.129772] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.129774] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.129776] usb usb6: Product: UHCI Host Controller
[ 1.129777] usb usb6: Manufacturer: Linux 4.15.0-21-generic uhci_hcd
[ 1.129779] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.129900] hub 6-0:1.0: USB hub found
[ 1.129906] hub 6-0:1.0: 2 ports detected
[ 1.130077] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.130082] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.130087] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.130103] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c800
[ 1.130147] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.130149] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.130151] usb usb7: Product: UHCI Host Controller
[ 1.130152] usb usb7: Manufacturer: Linux 4.15.0-21-generic uhci_hcd
[ 1.130154] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.130279] hub 7-0:1.0: USB hub found
[ 1.130285] hub 7-0:1.0: 2 ports detected
[ 1.130457] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.130462] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.130467] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.130484] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 1.130532] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.130534] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.130536] usb usb8: Product: UHCI Host Controller
[ 1.130538] usb usb8: Manufacturer: Linux 4.15.0-21-generic uhci_hcd
[ 1.130539] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.130662] hub 8-0:1.0: USB hub found
[ 1.130668] hub 8-0:1.0: 2 ports detected
[ 1.130813] i8042: PNP: No PS/2 controller found.
[ 1.130813] i8042: Probing ports directly.
[ 1.133363] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.133367] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.133556] mousedev: PS/2 mouse device common for all mice
[ 1.133799] rtc_cmos 00:01: RTC can wake from S4
[ 1.133935] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.133957] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.133965] i2c /dev entries driver
[ 1.134027] device-mapper: uevent: version 1.0.3
[ 1.134141] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.134240] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.134700] NET: Registered protocol family 10
[ 1.139643] Segment Routing with IPv6
[ 1.139667] NET: Registered protocol family 17
[ 1.139719] Key type dns_resolver registered
[ 1.140093] RAS: Correctable Errors collector initialized.
[ 1.140136] microcode: sig=0x1067a, pf=0x10, revision=0xa0b
[ 1.140242] microcode: Microcode Update Driver: v2.2.
[ 1.140482] registered taskstats version 1
[ 1.140493] Loading compiled-in X.509 certificates
[ 1.143645] Loaded X.509 cert 'Build time autogenerated kernel key: 6c3c43f52f16595b4a599556085fadf8d00deb38'
[ 1.143669] zswap: loaded using pool lzo/zbud
[ 1.147938] Key type big_key registered
[ 1.147941] Key type trusted registered
[ 1.149985] Key type encrypted registered
[ 1.149987] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.149990] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.150008] evm: HMAC attrs: 0x1
[ 1.150269] Magic number: 2:958:169
[ 1.150423] rtc_cmos 00:01: setting system clock to 2018-05-20 08:10:25 UTC (1526803825)
[ 1.151845] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.151846] EDD information not available.
[ 1.464031] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.665743] usb 2-1: New USB device found, idVendor=06f8, idProduct=300d
[ 1.665746] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.665748] usb 2-1: Product: Deluxe Optical Glass
[ 1.665751] usb 2-1: Manufacturer: Guillemot Corporation
[ 1.729072] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.729088] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.856032] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.888080] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.888091] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.892687] ata1.00: ATA-8: WDC WD10EADS-65M2BX, 01.00A01, max UDMA/133
[ 1.892690] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.892696] ata1.01: ATAPI: hp DDVDW TS-H653R, 0E00, max UDMA/100
[ 1.895123] ata1.00: configured for UDMA/133
[ 1.899636] ata1.01: configured for UDMA/100
[ 1.900166] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-65M 0A01 PQ: 0 ANSI: 5
[ 1.900399] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.900460] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.900482] sd 0:0:0:0: [sda] Write Protect is off
[ 1.900484] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.900519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.901209] scsi 0:0:1:0: CD-ROM hp CDDVDW TS-H653R 0E00 PQ: 0 ANSI: 5
[ 1.932025] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[ 1.963276] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.963278] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.963432] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.963531] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.057737] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.058407] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.062447] Freeing unused kernel memory: 2404K
[ 2.062450] Write protecting the kernel read-only data: 20480k
[ 2.063516] Freeing unused kernel memory: 2008K
[ 2.068969] Freeing unused kernel memory: 1904K
[ 2.078615] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.078616] x86/mm: Checking user space page tables
[ 2.088285] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f211f1f1b, max_idle_ns: 440795206105 ns
[ 2.088307] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.134056] usb 3-1: New USB device found, idVendor=0fce, idProduct=d089
[ 2.134059] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.134061] usb 3-1: Product: Sony Ericsson W580 i-mode
[ 2.134063] usb 3-1: Manufacturer: Sony Ericsson
[ 2.134064] usb 3-1: SerialNumber: 3596000102612160
[ 2.141050] usb 6-2: New USB device found, idVendor=04f2, idProduct=0841
[ 2.141053] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.141054] usb 6-2: Product: HP USB Multimedia Keyboard
[ 2.141056] usb 6-2: Manufacturer: CHICONY
[ 2.151724] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.190726] usbcore: registered new interface driver usbhid
[ 2.190727] usbhid: USB HID core driver
[ 2.199735] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.200207] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0x0000000008a7e93a, 90:e6:ba:ec:75:1f, XID 081000c0 IRQ 27
[ 2.200210] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.201659] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:04F2:0841.0001/input/input4
[ 2.231900] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 2.264287] hid-generic 0003:04F2:0841.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input0
[ 2.264984] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:04F2:0841.0002/input/input6
[ 2.271720] checking generic (df000000 130000) vs hw (e0000000 10000000)
[ 2.271722] checking generic (df000000 130000) vs hw (de000000 2000000)
[ 2.271723] fb: switching to nouveaufb from VESA VGA
[ 2.271759] Console: switching to colour dummy device 80x25
[ 2.271931] nouveau 0000:04:00.0: NVIDIA GT216 (0a5000a2)
[ 2.324216] hid-generic 0003:04F2:0841.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input1
[ 2.396019] nouveau 0000:04:00.0: bios: version 70.16.3c.00.05
[ 2.396874] nouveau 0000:04:00.0: bios: OOB 1 d7500086 d7500086
[ 2.397385] nouveau 0000:04:00.0: fb: 1024 MiB DDR3
[ 2.668034] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[ 2.692037] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[ 2.862062] usb 3-2: New USB device found, idVendor=1131, idProduct=1001
[ 2.862065] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.862066] usb 3-2: Product: ISSCBTM
[ 2.862068] usb 3-2: Manufacturer: ISSC
[ 3.088074] usb 7-2: New USB device found, idVendor=0461, idProduct=4d0f
[ 3.088077] usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.088078] usb 7-2: Product: USB Optical Mouse
[ 3.106517] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:0461:4D0F.0003/input/input7
[ 3.106699] hid-generic 0003:0461:4D0F.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 3.316046] usb 2-5: new high-speed USB device number 5 using ehci-pci
[ 3.487635] usb 2-5: New USB device found, idVendor=0bda, idProduct=0151
[ 3.487638] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.487639] usb 2-5: Product: USB2.0-CRW
[ 3.487641] usb 2-5: Manufacturer: Generic
[ 3.487643] usb 2-5: SerialNumber: 20060413092100000
[ 3.780510] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 3.780719] scsi host2: usb-storage 2-5:1.0
[ 3.780814] usbcore: registered new interface driver usb-storage
[ 3.782430] usbcore: registered new interface driver uas
[ 4.805292] scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 4.810277] scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 4.815277] scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4.820275] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 4.820708] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.820916] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 4.821105] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 4.821314] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 4.854764] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 4.858260] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 4.860019] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 4.860879] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 5.304001] [TTM] Zone kernel: Available graphics memory: 3051850 kiB
[ 5.304003] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 5.304003] [TTM] Initializing pool allocator
[ 5.304027] [TTM] Initializing DMA pool allocator
[ 5.304053] nouveau 0000:04:00.0: DRM: VRAM: 1024 MiB
[ 5.304055] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB
[ 5.304059] nouveau 0000:04:00.0: DRM: TMDS table version 2.0
[ 5.304060] nouveau 0000:04:00.0: DRM: DCB version 4.0
[ 5.304063] nouveau 0000:04:00.0: DRM: DCB outp 00: 02000300 00000000
[ 5.304065] nouveau 0000:04:00.0: DRM: DCB outp 01: 01000302 00020030
[ 5.304067] nouveau 0000:04:00.0: DRM: DCB outp 02: 02011362 00020010
[ 5.304069] nouveau 0000:04:00.0: DRM: DCB outp 03: 01022310 00000000
[ 5.304071] nouveau 0000:04:00.0: DRM: DCB conn 00: 00001030
[ 5.304073] nouveau 0000:04:00.0: DRM: DCB conn 01: 00002161
[ 5.304074] nouveau 0000:04:00.0: DRM: DCB conn 02: 00000200
[ 5.306842] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.306843] [drm] Driver supports precise vblank timestamp query.
[ 5.308667] nouveau 0000:04:00.0: DRM: MM: using COPY for buffer copies
[ 5.349858] nouveau 0000:04:00.0: DRM: allocated 1680x1050 fb: 0x70000, bo 00000000b6c5630a
[ 5.349951] fbcon: nouveaufb (fb0) is primary device
[ 5.350016] Console: switching to colour frame buffer device 210x65
[ 5.350059] nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device
[ 5.368043] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 0
[ 36.869369] random: crng init done
[ 37.645740] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 39.191192] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.242575] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 39.260168] systemd[1]: Detected architecture x86-64.
[ 39.270120] systemd[1]: Set hostname to <fred-linux>.
[ 41.169730] systemd[1]: Created slice User and Session Slice.
[ 41.169815] systemd[1]: Reached target User and Group Name Lookups.
[ 41.169886] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 41.170119] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 41.170323] systemd[1]: Created slice System Slice.
[ 41.170358] systemd[1]: Reached target Slices.
[ 41.170446] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 41.493502] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 41.858578] Adding 1343176k swap on /swapfile. Priority:-2 extents:5 across:1375944k FS
[ 41.998394] RPC: Registered named UNIX socket transport module.
[ 41.998396] RPC: Registered udp transport module.
[ 41.998396] RPC: Registered tcp transport module.
[ 41.998397] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 42.374986] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 44.076282] lp: driver loaded but no devices found
[ 44.280340] systemd-journald[291]: Received request to flush runtime journal from PID 1
[ 44.706435] ppdev: user-space parallel port driver
[ 54.576484] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 54.614048] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247)
[ 54.614057] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 54.614092] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 54.635775] snd_hda_intel 0000:04:00.1: Disabling MSI
[ 54.635788] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[ 54.650742] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
[ 54.651239] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 54.651241] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 54.651243] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 54.651245] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 54.651246] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 54.651248] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 54.651250] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 54.651252] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 54.651254] snd_hda_codec_realtek hdaudioC0D0: Line=0x1c
[ 54.665012] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 54.665080] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 54.665152] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 54.665226] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 54.665298] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 54.665371] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 54.665439] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 54.665523] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 54.698821] kvm: disabled by bios
[ 54.706084] intel_powerclamp: No package C-state available
[ 54.752283] intel_powerclamp: No package C-state available
[ 55.327387] cdc_wdm 3-1:3.7: cdc-wdm1: USB WDM device
[ 55.327423] usbcore: registered new interface driver cdc_wdm
[ 55.327974] cdc_acm 3-1:3.1: ttyACM0: USB ACM device
[ 55.331207] cdc_acm 3-1:3.3: ttyACM1: USB ACM device
[ 55.338819] usbcore: registered new interface driver cdc_acm
[ 55.338821] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 55.344142] media: Linux media interface: v0.10
[ 55.350783] Linux video capture interface: v2.00
[ 55.362286] uvcvideo: Found UVC 1.00 device Deluxe Optical Glass (06f8:300d)
[ 55.366476] uvcvideo 2-1:1.0: Entity type for entity Extension 5 was not initialized!
[ 55.366478] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized!
[ 55.366480] uvcvideo 2-1:1.0: Entity type for entity Processing 3 was not initialized!
[ 55.366482] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
[ 55.366580] input: Deluxe Optical Glass: Deluxe Op as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input16
[ 55.366688] usbcore: registered new interface driver uvcvideo
[ 55.366688] USB Video Class driver (1.1.1)
[ 55.389770] Bluetooth: Core ver 2.22
[ 55.389793] NET: Registered protocol family 31
[ 55.389794] Bluetooth: HCI device and connection manager initialized
[ 55.389798] Bluetooth: HCI socket layer initialized
[ 55.389801] Bluetooth: L2CAP socket layer initialized
[ 55.389808] Bluetooth: SCO socket layer initialized
[ 55.394009] usb 2-1: 3:1: cannot get freq at ep 0x84
[ 55.411900] usbcore: registered new interface driver snd-usb-audio
[ 55.657269] cdc_ether 3-1:3.8 usb0: register 'cdc_ether' at usb-0000:00:1a.0-1, CDC Ethernet Device, 02:80:37:fa:02:00
[ 55.657302] usbcore: registered new interface driver cdc_ether
[ 55.884554] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input17
[ 55.884624] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input18
[ 55.884688] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input19
[ 55.884752] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input20
[ 56.742448] audit: type=1400 audit(1526803881.088:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=459 comm="apparmor_parser"
[ 56.742453] audit: type=1400 audit(1526803881.088:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=459 comm="apparmor_parser"
[ 56.742455] audit: type=1400 audit(1526803881.088:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=459 comm="apparmor_parser"
[ 56.743418] audit: type=1400 audit(1526803881.088:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=456 comm="apparmor_parser"
[ 56.743422] audit: type=1400 audit(1526803881.088:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=456 comm="apparmor_parser"
[ 56.743425] audit: type=1400 audit(1526803881.088:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=456 comm="apparmor_parser"
[ 56.743427] audit: type=1400 audit(1526803881.088:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=456 comm="apparmor_parser"
[ 56.743890] audit: type=1400 audit(1526803881.088:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=455 comm="apparmor_parser"
[ 56.743894] audit: type=1400 audit(1526803881.088:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=455 comm="apparmor_parser"
[ 56.747678] audit: type=1400 audit(1526803881.092:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=461 comm="apparmor_parser"
[ 56.748285] usbcore: registered new interface driver btusb
[ 56.883611] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 58.607635] cdc_ether 3-1:3.8 enp0s26f0u1c3i8: renamed from usb0
[ 62.124345] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 62.124347] Bluetooth: BNEP filters: protocol multicast
[ 62.124352] Bluetooth: BNEP socket layer initialized
[ 65.498109] IPv6: ADDRCONF(NETDEV_UP): enp0s26f0u1c3i8: link is not ready
[ 65.503843] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 65.601373] r8169 0000:02:00.0 enp2s0: link down
[ 65.601375] r8169 0000:02:00.0 enp2s0: link down
[ 65.601458] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 65.626345] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 65.646876] NFSD: starting 90-second grace period (net f0000099)
[ 67.279127] r8169 0000:02:00.0 enp2s0: link up
[ 67.279138] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 73.203638] usb 2-1: 3:1: cannot get freq at ep 0x84
[ 73.245765] usb 2-1: 3:1: cannot get freq at ep 0x84
[ 73.333427] Bluetooth: RFCOMM TTY layer initialized
[ 73.333436] Bluetooth: RFCOMM socket layer initialized
[ 73.333444] Bluetooth: RFCOMM ver 1.11
[ 1200.772325] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 1721.290508] perf: interrupt took too long (3134 > 3127), lowering kernel.perf_event_max_sample_rate to 63750
$ Hors ligne
#4 Le 20/05/2018, à 09:48
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ sudo systemd-analyze
Startup finished in 38.847s (kernel) + 40.912s (userspace) = 1min 19.760s
graphical.target reached after 40.881s in userspace
$ Hors ligne
#5 Le 20/05/2018, à 09:50
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ sudo systemd-analyze blame
[sudo] Mot de passe de fred :
19.322s dev-sda7.device
17.558s systemd-journal-flush.service
13.406s keyboard-setup.service
12.114s NetworkManager-wait-online.service
9.752s systemd-udevd.service
9.392s systemd-sysctl.service
4.938s udisks2.service
4.702s snapd.service
4.680s NetworkManager.service
4.235s plymouth-start.service
4.014s networkd-dispatcher.service
3.965s systemd-modules-load.service
3.693s grub-common.service
3.367s systemd-tmpfiles-setup-dev.service
2.257s systemd-rfkill.service
2.200s apparmor.service
2.177s accounts-daemon.service
2.044s nmbd.service
1.955s run-rpc_pipefs.mount
1.928s ModemManager.service
1.733s colord.service
1.542s nfs-blkmap.service
1.284s nfs-idmapd.service
1.202s proc-fs-nfsd.mount
1.112s bluetooth.service
1.104s systemd-resolved.service
1.104s systemd-timesyncd.service
1.093s binfmt-support.service
759ms upower.service
743ms nfs-config.service
737ms gpu-manager.service
713ms plymouth-quit-wait.service
711ms lightdm.service
614ms systemd-journald.service
575ms avahi-daemon.service
506ms teamviewerd.service
360ms polkit.service
355ms systemd-logind.service
335ms swapfile.swap
324ms systemd-random-seed.service
306ms nfs-mountd.service
278ms systemd-remount-fs.service
269ms user@1000.service
261ms wpa_supplicant.service
253ms smbd.service
216ms snapd.seeded.service
213ms rsyslog.service
207ms dev-hugepages.mount
207ms sys-kernel-debug.mount
203ms dev-mqueue.mount
150ms kmod-static-nodes.service
134ms setvtrgb.service
133ms rpcbind.service
127ms systemd-udev-trigger.service
95ms apport.service
84ms systemd-tmpfiles-setup.service
84ms systemd-update-utmp.service
73ms ufw.service
59ms systemd-tmpfiles-clean.service
41ms plymouth-read-write.service
41ms alsa-restore.service
34ms pppd-dns.service
31ms nfs-server.service
22ms timidity.service
15ms systemd-user-sessions.service
14ms kerneloops.service
14ms proc-sys-fs-binfmt_misc.mount
8ms systemd-update-utmp-runlevel.service
8ms ureadahead-stop.service
8ms console-setup.service
4ms sys-kernel-config.mount
3ms sys-fs-fuse-connections.mount
1ms snapd.socket
lines 34-73/73 (END)Hors ligne
#6 Le 20/05/2018, à 09:53
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ sudo systemd-analyze critical-chain
[sudo] Mot de passe de fred :
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @40.881s
└─multi-user.target @40.881s
└─smbd.service @40.627s +253ms
└─nmbd.service @38.582s +2.044s
└─network-online.target @38.577s
└─NetworkManager-wait-online.service @26.462s +12.114s
└─NetworkManager.service @21.779s +4.680s
└─dbus.service @21.763s
└─basic.target @21.762s
└─sockets.target @21.762s
└─snapd.socket @21.760s +1ms
└─sysinit.target @21.716s
└─systemd-timesyncd.service @20.611s +1.104s
└─systemd-tmpfiles-setup.service @20.507s +84ms
└─systemd-journal-flush.service @2.947s +17.558s
└─systemd-journald.service @2.332s +614ms
└─systemd-journald.socket @2.323s
└─system.slice @2.322s
└─-.slice @2.319s
$ Hors ligne
#7 Le 20/05/2018, à 12:14
- cqfd93
Re : Démarrage lent sou 18.04 LTS - RESOLU
Bonjour,
Quand il y a plusieurs retours de commandes (ici 4), il est préférable de les poster dans le même message (au besoin en utilisant le lien « Modifier »), ça évite d'alourdir la discussion.
− cqfd93 −
Hors ligne
#8 Le 20/05/2018, à 12:28
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
Ok, j'en prends note pour la proch. fois.
Hors ligne
#9 Le 21/05/2018, à 07:32
- LukePerp
Re : Démarrage lent sou 18.04 LTS - RESOLU
Fred, il semble avoir une ligne montrant un démarrage long :
[ 36.869369] random: crng init doneMais, je ne sais pas l'interpréter. Mes recherches sur le net ne permettent pas d'identifier une solution claire.
Attendons du renfort d'autres spécialistes.
Dernière modification par LukePerp (Le 21/05/2018, à 07:32)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Ethereum user
Hors ligne
#10 Le 21/05/2018, à 10:12
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
merci LukePerp pour l'info, je vais investiguer avec le post #9
Hors ligne
#11 Le 21/05/2018, à 12:13
- seebz
Re : Démarrage lent sou 18.04 LTS - RESOLU
Peut-être une piste sur ce topic: démarrage de xubuntu 18.04 devenu très lent
Que donne la commande suivante ?
dmesg | grep -C 2 sda7Et celle-ci ?
cat /etc/initramfs-tools/conf.d/resume-----
Edit:
si c'est ce que je pense, les commande suivante devraient résoudre le problème.
(et si ce n'est pas ce que je pense, les commandes ne devraient pas engendrer de problème)
echo "RESUME=none" | sudo tee /etc/initramfs-tools/conf.d/resume
sudo update-initramfs -uEnsuite, il suffit de redémarrer pour éventuellement constater une amélioration.
-----
Edit2: Le fichier à modifier est /etc/initramfs-tools/conf.d/resume et non /etc/initramfs/conf.d/resume
Dernière modification par seebz (Le 22/05/2018, à 09:19)
Hors ligne
#12 Le 22/05/2018, à 07:41
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ dmesg | grep -C 2 sda7
[ 1.931480] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.931574] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.021707] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.022278] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.026364] Freeing unused kernel memory: 2404K
--
[ 4.833753] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 36.036457] random: crng init done
[ 36.042975] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 37.610830] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.654455] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
--
[ 39.578959] systemd[1]: Listening on Journal Socket.
[ 39.579908] systemd[1]: Starting Uncomplicated firewall...
[ 40.002982] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 40.344676] Adding 1343176k swap on /swapfile. Priority:-2 extents:5 across:1375944k FS
[ 40.406480] RPC: Registered named UNIX socket transport module.$ cat /etc/initramfs/conf.d/resume
cat: /etc/initramfs/conf.d/resume: Aucun fichier ou dossier de ce typeHors ligne
#13 Le 22/05/2018, à 07:44
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ sudo mkdir -p /etc/initramfs/conf.d
$ echo "RESUME=none" | sudo tee /etc/initramfs/conf.d/resume
RESUME=none
$ sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-4.15.0-22-generic
W: initramfs-tools configuration sets RESUME=UUID=145b4f75-ce14-4a2f-bf6b-6f1ab8e7e1b1
W: but no matching swap device is available.
live-boot: core filesystems devices utils memdisk udev wget blockdev dns.
$ Hors ligne
#14 Le 22/05/2018, à 07:56
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
après redémarrage pas de changement, sauf que je n'ai plus mes icones sur le bureau
Hors ligne
#15 Le 22/05/2018, à 09:05
- seebz
Re : Démarrage lent sou 18.04 LTS - RESOLU
fred1234 a écrit :
$ cat /etc/initramfs/conf.d/resume cat: /etc/initramfs/conf.d/resume: Aucun fichier ou dossier de ce type
Le fichier se trouve dans un autre dossier (ma faute, je me suis trompé de chemin), donc on va recommencer...
---
On va supprimer le fichier créé au mauvais endroit, ainsi que son arborescence (de façon sécurisé; uniquement si les dossiers sont vides) :
sudo rm /etc/initramfs/conf.d/resume
[ `ls /etc/initramfs/conf.d/` ] || sudo rm -r /etc/initramfs/conf.d/
[ `ls /etc/initramfs/` ] || sudo rm -r /etc/initramfs/On modifie ensuite le bon fichier :
echo "RESUME=none" | sudo tee /etc/initramfs-tools/conf.d/resume
sudo update-initramfs -uEnsuite, tu redémarres.
---
Si ca n'améliore pas le démarrage, indiques-nous le contenu du fstab :
cat /etc/fstabDernière modification par seebz (Le 22/05/2018, à 09:35)
Hors ligne
#16 Le 22/05/2018, à 13:22
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
Du nouveau : après lancement des divers commandes (ou mauvaises manips de ma part) je me retrouve sous 17.10 ;-/
Je vais donc refaire une migration (c'est d'actualité) vers 18.10
et je donnerais le résultat
A bientôt
Hors ligne
#17 Le 24/05/2018, à 09:10
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
Voilà de retour sous 18.10 : temps de démarrage revenu identique à 17.10 = env 1mn30 (à partir de mise sous tension).
Cela me semble un peu long, mais acceptable.
Quelle est le temps de démarrage moyen pour cette disrib. ?
A bientôt
Hors ligne
#18 Le 24/05/2018, à 09:16
- xubu1957
Re : Démarrage lent sou 18.04 LTS - RESOLU
Bonjour,
fred1234 a écrit :
Voilà de retour sous 18.10 ...
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#19 Le 24/05/2018, à 09:29
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
Il me semble que Ubuntu 18.10 « Cosmic Cuttlefish » est attendu pour octobre prochain.
Donc je pense avoir la The Bionic Beaver.
Hors ligne
#20 Le 24/05/2018, à 09:33
- xubu1957
Re : Démarrage lent sou 18.04 LTS - RESOLU
Fournis le noyau actif :
uname -aet les noyaux présents :
dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -tConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#21 Le 24/05/2018, à 09:33
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
Confirmation :l
sb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04 LTS
Release: 18.04
Codename: bionic
Hors ligne
#22 Le 24/05/2018, à 09:36
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
$ uname -a
Linux fred-linux 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
$
$ dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t
ii binutils-x86-64-linux-gnu 2.30-15ubuntu1
rc linux-image-extra-4.13.0-36-generic 4.13.0-36.40
rc linux-image-4.13.0-36-generic 4.13.0-36.40
ii linux-image-extra-4.13.0-43-generic 4.13.0-43.48
ii linux-image-4.13.0-43-generic 4.13.0-43.48
ii linux-generic 4.15.0.22.23
ii linux-headers-generic 4.15.0.22.23
ii linux-image-generic 4.15.0.22.23
ii linux-headers-4.15.0-22 4.15.0-22.24
ii linux-headers-4.15.0-22-generic 4.15.0-22.24
ii linux-image-4.15.0-22-generic 4.15.0-22.24Hors ligne
#23 Le 24/05/2018, à 09:38
- xubu1957
Re : Démarrage lent sou 18.04 LTS - RESOLU
Tu as bien le noyau 4.15.0-22 de bionic et c'est le dernier sorti > linux-headers-generic.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#24 Le 24/05/2018, à 09:45
- fred1234
Re : Démarrage lent sou 18.04 LTS - RESOLU
j'ai gardé le grub et la conf bureau de la 17.04, j'aimerais savoir si un temps de démarrage de 1,30 mn est habituel ?
Hors ligne
#25 Le 24/05/2018, à 10:00
- xubu1957
Re : Démarrage lent sou 18.04 LTS - RESOLU
Je ne sais pas, au boulot sur Windows 7, il m'est arrivé de dépasser les 25 minutes. 
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
Pages : 1