#1 Le 25/05/2018, à 22:56
- Atriaze
RESOLU Bluetooth activé mais ne détecte rien
Bonjour à vous tous,
Suite installation Ubuntu 18.4 LTS sur un Asus r510j, je me retrouve avec un bluetooth qui est activé, mais ne détectant aucun appareil. De plus il n'est pas détectable non plus.
Commande uname -a
uname -a; lspci -nnk | grep -iA2 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
Linux natacha-X550JK 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
03:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Lite-On Communications Inc BCM43142 802.11b/g/n [11ad:6605]
Kernel driver in use: wl
--
04:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f]
Kernel driver in use: r8169
Kernel modules: r8169
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0bda:57b4 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 04ca:2006 Lite-On Technology Corp. Broadcom BCM43142A0 Bluetooth Device
Bus 001 Device 002: ID 045e:07b2 Microsoft Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[ 12.189275] Bluetooth: Core ver 2.22
[ 12.189289] Bluetooth: HCI device and connection manager initialized
[ 12.189291] Bluetooth: HCI socket layer initialized
[ 12.189293] Bluetooth: L2CAP socket layer initialized
[ 12.189296] Bluetooth: SCO socket layer initialized
[ 12.766147] Bluetooth: hci0: BCM: chip id 70
[ 12.767119] Bluetooth: hci0: BCM: features 0x06
[ 12.783125] Bluetooth: hci0: natacha-X550JK
[ 12.783128] Bluetooth: hci0: BCM (001.001.011) build 0000
[ 12.818860] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[ 12.818863] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[ 14.844018] Bluetooth: hci0: command 0x1003 tx timeout
[ 18.699732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.699733] Bluetooth: BNEP filters: protocol multicast
[ 18.699736] Bluetooth: BNEP socket layer initialized
[ 21.084026] Bluetooth: hci0: command 0x1003 tx timeout
[ 53.713500] Bluetooth: RFCOMM TTY layer initialized
[ 53.713504] Bluetooth: RFCOMM socket layer initialized
[ 53.713509] Bluetooth: RFCOMM ver 1.11
[ 76.356241] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 356.468993] Bluetooth: hci0: command 0x1003 tx timeout
[ 370.205816] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 386.334828] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 402.207842] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 418.331820] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 434.200915] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 450.325862] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 466.199904] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 482.322028] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 498.192986] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 514.319079] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 530.189096] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 546.316069] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 562.187156] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 565.891859] Bluetooth: hci0: command 0x1003 tx timeout
[ 571.403153] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 588.290435] Bluetooth: hci0: command 0x1003 tx timeout
[ 594.185174] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 768.257519] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[ 0.044030] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 1.588993] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x461f15)
[ 2.470312] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 8.317568] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 12.818860] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
bluetooth 548864 43 btrtl,btintel,bnep,btbcm,rfcomm,btusb
ecdh_generic 24576 2 bluetooth
sudo service bluetooth status
● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2018-05-25 23:26:36 CEST; 24min ago
Docs: man:bluetoothd(8)
Main PID: 768 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 4915)
CGroup: /system.slice/bluetooth.service
└─768 /usr/lib/bluetooth/bluetoothd
mai 25 23:26:35 natacha-X550JK systemd[1]: Starting Bluetooth service...
mai 25 23:26:35 natacha-X550JK bluetoothd[768]: Bluetooth daemon 5.48
mai 25 23:26:35 natacha-X550JK bluetoothd[768]: Starting SDP server
mai 25 23:26:36 natacha-X550JK systemd[1]: Started Bluetooth service.
mai 25 23:26:36 natacha-X550JK bluetoothd[768]: Bluetooth management interface 1.14 initialized
mai 25 23:26:38 natacha-X550JK bluetoothd[768]: Loading LTKs timed out for hci0
mai 25 23:27:11 natacha-X550JK bluetoothd[768]: Endpoint registered: sender=:1.79 path=/MediaEndpoint/A2DPSource
mai 25 23:27:11 natacha-X550JK bluetoothd[768]: Endpoint registered: sender=:1.79 path=/MediaEndpoint/A2DPSink
dpkg -l | grep blue
i bluez 5.48-0ubuntu3 amd64 Bluetooth tools and daemons
ii bluez-cups 5.48-0ubuntu3 amd64 Bluetooth printer driver for CUPS
ii bluez-obexd 5.48-0ubuntu3 amd64 bluez obex daemon
ii gir1.2-gnomebluetooth-1.0:amd64 3.28.0-2 amd64 Introspection data for GnomeBluetooth
ii gnome-bluetooth 3.28.0-2 amd64 GNOME Bluetooth tools
ii libbluetooth3:amd64 5.48-0ubuntu3 amd64 Library to use the BlueZ Linux Bluetooth stack
ii libgnome-bluetooth13:amd64 3.28.0-2 amd64 GNOME Bluetooth tools - support library
ii pulseaudio-module-bluetooth 1:11.1-1ubuntu7 amd64 Bluetooth module for PulseAudio sound server
rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
J'ai lu le forum sur ces sujets, mais là je tourne en rond.....
Merci à vous de votre aide. )
Dernière modification par Atriaze (Le 26/05/2018, à 10:25)
Hors ligne
#2 Le 26/05/2018, à 05:58
- xubu1957
Re : RESOLU Bluetooth activé mais ne détecte rien
Bonjour,
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
Dans [SOLVED] Bluetooth - [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode
sudo apt-get install intel-microcode
and reboot.
et redémarrer.Hope it helps.
J'espère que ça aide
_ _ _
Vu :
ID 04ca:2006 Lite-On Technology Corp. Broadcom BCM43142A0 Bluetooth Device
Il faut récupérer le pilote :
BCM43142A0-04ca-2006.hcd Version 12.0.1.940
dans > github.com/winterheart/broadcom-bt-firmware/tree/master/brcm
et l'installer :
Try
wget https://github.com/winterheart/broadcom-bt-firmware/blob/master/brcm/BCM43142A0-04ca-2006.hcd
sudo cp BCM43142A0-04ca-2006.hcd /lib/firmware/brcm/BCM.hcd
sudo modprobe -r btusb
sudo modprobe btusb
Shutdown and boot it up
Arrêtez et démarrez
(EDIT Correction commande 1 : 04ca au lieu de 004ca)
Dernière modification par xubu1957 (Le 17/08/2019, à 10:10)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 26/05/2018, à 09:42
- Atriaze
Re : RESOLU Bluetooth activé mais ne détecte rien
Bonjour xubu,
Après téléchargement le pilote cela fonctionne, sauf pour une imprimante qui est un HP DESKJET 3630....
Aller je vais bien trouver sur le forum des infos.
Encore merci à toi xubu )
Hors ligne
#4 Le 26/05/2018, à 09:47
- xubu1957
Re : RESOLU Bluetooth activé mais ne détecte rien
Pour éditer cette discussion et rajouter [Résolu] au début du titre, il faut utiliser le bouton Modifier au bas de ton premier message.
sauf pour une imprimante qui est un HP DESKJET 3630....
Un problème = une discussion.
Tu dois créer une nouvelle discussion en section Imprimantes et scanners, en suivant les indications de Initier une nouvelle discussion
Merci
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne