[Résolu] Problème au démarage - Problème d'affichage

MunudigBras · Le 26/05/2018, à 18:53

?? a écrit :

[ Modéré - voir ./viewtopic.php?pid=21923423#p21923423 ]
sudo apt install boot-info-script
sudo bootinfoscript T
cat T

encore un pb d'installation :

munudigbras@ubuntu:~$ sudo apt install boot-info-script
[sudo] Mot de passe de munudigbras : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet boot-info-script
munudigbras@ubuntu:~$ sudo bootinfoscript T
sudo: bootinfoscript : commande introuvable
munudigbras@ubuntu:~$  cat T
cat: T: Aucun fichier ou dossier de ce type
munudigbras@ubuntu:~$

Dernière modification par cqfd93 (Le 27/05/2018, à 17:01)

?? · Le 26/05/2018, à 19:01

Contrôles la qualité du CD-rom, c'est la dernière option de la liste...

MunudigBras · Le 26/05/2018, à 20:46

?? a écrit :

Contrôles la qualité du CD-rom, c'est la dernière option de la liste...

j'ai vérifié à partir de la grille de boot avant d'"essayer Ubuntu sans l'installer" résultat : RAS
Ensuite, j'ai analyser les partitions du cdrom avec l'utilitaire de disque : RAS
est-ce qu'il y a une autre méthode ?

?? · Le 26/05/2018, à 22:03

J'attends le retour des deux fichiers de traces du mode recovery

MunudigBras · Le 26/05/2018, à 23:31

Désolé ??, j'avais zappé la consigne.

?? a écrit :

J'attends le retour des deux fichiers de traces du mode recovery

TRACE1:

munudigbras@ubuntu:~$ sudo mount -v /dev/sda2    /mnt
[sudo] Mot de passe de munudigbras : 
mount: /dev/sda2 mounted on /mnt.
munudigbras@ubuntu:~$ cat    /mnt/TRACE1
[    0.000000] microcode: CPU0 microcode updated early to revision 0xc2, date = 2017-11-16
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-127-generic (buildd@lcy01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #153-Ubuntu SMP Sat May 19 10:58:46 UTC 2018 (Ubuntu 4.4.0-127.153-generic 4.4.128)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-127-generic.efi.signed root=UUID=837077e9-e79a-4ef6-9074-00d7363bbaef ro recovery nomodeset
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078a87fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078a88000-0x0000000078a88fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078a89000-0x0000000078a89fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078a8a000-0x000000008eb34fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008eb35000-0x000000008ee1efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ee1f000-0x000000008ef86fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ef87000-0x000000008f62cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008f62d000-0x000000008fb9cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008fb9d000-0x000000008fbfefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fc00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x8f287000  ACPI=0x8f287000  SMBIOS=0x8facf000  MPS=0xfc9e0  ESRT=0x8d2ddb18 
[    0.000000] esrt: Reserving ESRT space from 0x000000008d2ddb18 to 0x000000008d2ddb50.
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: MSI MS-7996/H110M PRO-D (MS-7996), BIOS 2.B0 12/15/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc00-0x000fcc0f] mapped at [ffff8800000fcc00]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x03217000, 0x03217fff] PGTABLE
[    0.000000] BRK [0x03218000, 0x03218fff] PGTABLE
[    0.000000] BRK [0x03219000, 0x03219fff] PGTABLE
[    0.000000] BRK [0x0321a000, 0x0321afff] PGTABLE
[    0.000000] BRK [0x0321b000, 0x0321bfff] PGTABLE
[    0.000000] BRK [0x0321c000, 0x0321cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33794000-0x35bc1fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008F287000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000008F2870A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000008F2ADBC8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000008F287200 0269C1 (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000008F62CC40 000040
[    0.000000] ACPI: APIC 0x000000008F2ADCE0 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000008F2ADD48 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000008F2ADD90 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000008F2ADDD0 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: FIDT 0x000000008F2AE190 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000008F2AE230 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000008F2B1390 00255F (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000008F2B38F0 000038 (v01 INTEL  SKL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008F2B3928 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000008F2B4710 000A29 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000008F2B5140 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000008F2B5188 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000008F2B6068 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x000000008F2B6100 000028 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008F2B6128 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000008F2B63C8 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000008F2B93D0 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000008F2B9408 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: BGRT 0x000000008F2B9460 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26eff7000-0x26effbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000078a87fff]
[    0.000000]   node   0: [mem 0x0000000078a8a000-0x000000008eb34fff]
[    0.000000]   node   0: [mem 0x000000008ee1f000-0x000000008ef86fff]
[    0.000000]   node   0: [mem 0x000000008fbff000-0x000000008fbfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2087993
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9075 pages used for memmap
[    0.000000]   DMA32 zone: 580764 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78a88000-0x78a88fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78a89000-0x78a89fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8eb35000-0x8ee1efff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ef87000-0x8f62cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8f62d000-0x8fb9cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8fb9d000-0x8fbfefff]
[    0.000000] PM: Registered nosave memory: [mem 0x8fc00000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88026ec00000 s99544 r8192 d31528 u1048576
[    0.000000] pcpu-alloc: s99544 r8192 d31528 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2055339
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-127-generic.efi.signed root=UUID=837077e9-e79a-4ef6-9074-00d7363bbaef ro recovery nomodeset
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8086428K/8351972K available (8537K kernel code, 1313K rwdata, 4000K rodata, 1512K init, 1316K bss, 265544K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 3311.928 MHz processor
[    0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.85 BogoMIPS (lpj=13247712)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20150930
[    0.028818] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.029509] Security Framework initialized
[    0.029512] Yama: becoming mindful.
[    0.029522] AppArmor: AppArmor initialized
[    0.029850] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030859] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031292] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031300] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031432] Initializing cgroup subsys io
[    0.031436] Initializing cgroup subsys memory
[    0.031441] Initializing cgroup subsys devices
[    0.031444] Initializing cgroup subsys freezer
[    0.031446] Initializing cgroup subsys net_cls
[    0.031449] Initializing cgroup subsys perf_event
[    0.031452] Initializing cgroup subsys net_prio
[    0.031455] Initializing cgroup subsys hugetlb
[    0.031457] Initializing cgroup subsys pids
[    0.031471] CPU: Physical Processor ID: 0
[    0.031473] CPU: Processor Core ID: 0
[    0.032412] mce: CPU supports 8 MCE banks
[    0.032425] CPU0: Thermal monitoring enabled (TM1)
[    0.032433] process: using mwait in idle threads
[    0.032436] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.032438] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.032441] Spectre V2 : Mitigation: Full generic retpoline
[    0.032443] Spectre V2 : Enabling Indirect Branch Prediction Barrier
[    0.032445] Spectre V2 : Enabling Indirect Branch Restricted Speculation
[    0.032447] Spectre V2 : Speculation control IBPB supported IBRS supported
[    0.032449] Spectre V2 : Filling RSB on context switch
[    0.032452] Spectre V2 : Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.032454] Speculative Store Bypass: Vulnerable
[    0.032726] Freeing SMP alternatives memory: 32K
[    0.034404] ftrace: allocating 32237 entries in 126 pages
[    0.055430] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.055433] smpboot: Max logical packages: 1
[    0.056637] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.060905] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100596] TSC deadline timer enabled
[    0.100601] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.100615] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[    0.100639] ... version:                4
[    0.100641] ... bit width:              48
[    0.100643] ... generic registers:      8
[    0.100645] ... value mask:             0000ffffffffffff
[    0.100647] ... max period:             00007fffffffffff
[    0.100649] ... fixed-purpose events:   3
[    0.100651] ... event mask:             00000007000000ff
[    0.101217] x86: Booting SMP configuration:
[    0.101220] .... node  #0, CPUs:      #1
[    0.102442] microcode: CPU1 microcode updated early to revision 0xc2, date = 2017-11-16
[    0.105464] x86: Booted up 1 node, 2 CPUs
[    0.105472] smpboot: Total of 2 processors activated (13247.71 BogoMIPS)
[    0.105498] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.106796] devtmpfs: initialized
[    0.108632] evm: security.selinux
[    0.108634] evm: security.SMACK64
[    0.108636] evm: security.SMACK64EXEC
[    0.108638] evm: security.SMACK64TRANSMUTE
[    0.108640] evm: security.SMACK64MMAP
[    0.108642] evm: security.ima
[    0.108644] evm: security.capability
[    0.108683] PM: Registering ACPI NVS region [mem 0x78a88000-0x78a88fff] (4096 bytes)
[    0.108687] PM: Registering ACPI NVS region [mem 0x8ef87000-0x8f62cfff] (6971392 bytes)
[    0.108784] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108793] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.108855] pinctrl core: initialized pinctrl subsystem
[    0.109005] RTC time: 21:03:24, date: 05/26/18
[    0.109096] NET: Registered protocol family 16
[    0.117459] cpuidle: using governor ladder
[    0.129461] cpuidle: using governor menu
[    0.129466] PCCT header not found.
[    0.129513] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.129517] ACPI: bus type PCI registered
[    0.129520] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.129573] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.129578] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.129588] PCI: Using configuration type 1 for base access
[    0.141672] ACPI: Added _OSI(Module Device)
[    0.141675] ACPI: Added _OSI(Processor Device)
[    0.141677] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.141679] ACPI: Added _OSI(Processor Aggregator Device)
[    0.148223] ACPI: Executed 36 blocks of module-level executable AML code
[    0.153516] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.156018] ACPI: Dynamic OEM Table Load:
[    0.156024] ACPI: SSDT 0xFFFF88026611F800 0006D5 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.156696] ACPI: Executed 1 blocks of module-level executable AML code
[    0.156746] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.157601] ACPI: Dynamic OEM Table Load:
[    0.157607] ACPI: SSDT 0xFFFF880264D42400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.158268] ACPI: Executed 1 blocks of module-level executable AML code
[    0.158541] ACPI: Dynamic OEM Table Load:
[    0.158547] ACPI: SSDT 0xFFFF880264DF8000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.159360] ACPI: Executed 1 blocks of module-level executable AML code
[    0.159463] ACPI: Dynamic OEM Table Load:
[    0.159467] ACPI: SSDT 0xFFFF880264DB2A00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.160132] ACPI: Executed 1 blocks of module-level executable AML code
[    0.160774] ACPI: Interpreter enabled
[    0.160803] ACPI: (supports S0 S3 S4 S5)
[    0.160805] ACPI: Using IOAPIC for interrupt routing
[    0.160831] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.162337] ACPI: Power Resource [PG00] (on)
[    0.162636] ACPI: Power Resource [PG01] (on)
[    0.162929] ACPI: Power Resource [PG02] (on)
[    0.164286] ACPI: Power Resource [WRST] (on)
[    0.164523] ACPI: Power Resource [WRST] (on)
[    0.164762] ACPI: Power Resource [WRST] (on)
[    0.164996] ACPI: Power Resource [WRST] (on)
[    0.165230] ACPI: Power Resource [WRST] (on)
[    0.165464] ACPI: Power Resource [WRST] (on)
[    0.165700] ACPI: Power Resource [WRST] (on)
[    0.165932] ACPI: Power Resource [WRST] (on)
[    0.166165] ACPI: Power Resource [WRST] (on)
[    0.166400] ACPI: Power Resource [WRST] (on)
[    0.166634] ACPI: Power Resource [WRST] (on)
[    0.166867] ACPI: Power Resource [WRST] (on)
[    0.167103] ACPI: Power Resource [WRST] (on)
[    0.167340] ACPI: Power Resource [WRST] (on)
[    0.167575] ACPI: Power Resource [WRST] (on)
[    0.167808] ACPI: Power Resource [WRST] (on)
[    0.168043] ACPI: Power Resource [WRST] (on)
[    0.168932] ACPI: Power Resource [WRST] (on)
[    0.169165] ACPI: Power Resource [WRST] (on)
[    0.169398] ACPI: Power Resource [WRST] (on)
[    0.174921] ACPI: Power Resource [FN00] (off)
[    0.174988] ACPI: Power Resource [FN01] (off)
[    0.175050] ACPI: Power Resource [FN02] (off)
[    0.175111] ACPI: Power Resource [FN03] (off)
[    0.175172] ACPI: Power Resource [FN04] (off)
[    0.176058] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.176064] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.176185] acpi PNP0A08:00: _OSC: platform does not support [PME AER]
[    0.176298] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
[    0.176301] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.176812] PCI host bridge to bus 0000:00
[    0.176816] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.176819] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.176822] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.176826] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.176829] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.176833] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.176841] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[    0.177066] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.177096] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.177184] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.177254] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.177265] pci 0000:00:08.0: reg 0x10: [mem 0xdff2f000-0xdff2ffff 64bit]
[    0.177379] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.177406] pci 0000:00:14.0: reg 0x10: [mem 0xdff10000-0xdff1ffff 64bit]
[    0.177460] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.177578] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.177610] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.177636] pci 0000:00:14.2: reg 0x10: [mem 0xdff2e000-0xdff2efff 64bit]
[    0.177767] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.177795] pci 0000:00:16.0: reg 0x10: [mem 0xdff2d000-0xdff2dfff 64bit]
[    0.177837] pci 0000:00:16.0: PME# supported from D3hot
[    0.177953] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.177974] pci 0000:00:17.0: reg 0x10: [mem 0xdff28000-0xdff29fff]
[    0.177981] pci 0000:00:17.0: reg 0x14: [mem 0xdff2c000-0xdff2c0ff]
[    0.177988] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.177995] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.178002] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.178009] pci 0000:00:17.0: reg 0x24: [mem 0xdff2b000-0xdff2b7ff]
[    0.178038] pci 0000:00:17.0: PME# supported from D3hot
[    0.178142] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.178197] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.178283] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.178340] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[    0.178524] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.178535] pci 0000:00:1f.2: reg 0x10: [mem 0xdff24000-0xdff27fff]
[    0.178661] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.178693] pci 0000:00:1f.3: reg 0x10: [mem 0xdff20000-0xdff23fff 64bit]
[    0.178717] pci 0000:00:1f.3: reg 0x20: [mem 0xdff00000-0xdff0ffff 64bit]
[    0.178751] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.178864] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.178898] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.178951] pci 0000:00:1f.4: reg 0x10: [mem 0xdff2a000-0xdff2a0ff 64bit]
[    0.179021] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.179204] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[    0.179224] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.179232] pci 0000:01:00.0: reg 0x18: [mem 0xdfe20000-0xdfe3ffff 64bit]
[    0.179238] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.179248] pci 0000:01:00.0: reg 0x30: [mem 0xdfe00000-0xdfe1ffff pref]
[    0.179270] pci 0000:01:00.0: supports D1 D2
[    0.179286] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.185486] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.185490] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.185492] pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.185495] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.185560] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.185597] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.185623] pci 0000:02:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit]
[    0.185639] pci 0000:02:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit]
[    0.185706] pci 0000:02:00.0: supports D1 D2
[    0.185707] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185777] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.193491] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.193495] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.193498] pci 0000:00:1c.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.194861] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.194903] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.194943] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.194982] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.195021] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.195060] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.195098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.195137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.195453] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.195544] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.195547] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.195550] vgaarb: loaded
[    0.195552] vgaarb: bridge control possible 0000:01:00.0
[    0.195721] SCSI subsystem initialized
[    0.195748] libata version 3.00 loaded.
[    0.195762] ACPI: bus type USB registered
[    0.195774] usbcore: registered new interface driver usbfs
[    0.195781] usbcore: registered new interface driver hub
[    0.195789] usbcore: registered new device driver usb
[    0.195903] PCI: Using ACPI for IRQ routing
[    0.224048] PCI: pci_cache_line_size set to 64 bytes
[    0.224084] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.224086] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.224087] e820: reserve RAM buffer [mem 0x78a88000-0x7bffffff]
[    0.224088] e820: reserve RAM buffer [mem 0x8eb35000-0x8fffffff]
[    0.224089] e820: reserve RAM buffer [mem 0x8ef87000-0x8fffffff]
[    0.224090] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[    0.224091] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.224162] NetLabel: Initializing
[    0.224165] NetLabel:  domain hash size = 128
[    0.224167] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.224175] NetLabel:  unlabeled traffic allowed by default
[    0.224255] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.224261] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.226295] amd_nb: Cannot enumerate AMD northbridges
[    0.226307] clocksource: Switched to clocksource hpet
[    0.230026] AppArmor: AppArmor Filesystem Enabled
[    0.230062] pnp: PnP ACPI init
[    0.230269] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.230272] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.230275] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.230278] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.230282] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230362] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.230394] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.230613] pnp 00:03: [dma 0 disabled]
[    0.230647] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.230734] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.230738] system 00:04: [io  0xffff] has been reserved
[    0.230741] system 00:04: [io  0xffff] has been reserved
[    0.230744] system 00:04: [io  0xffff] has been reserved
[    0.230746] system 00:04: [io  0x1800-0x18fe] has been reserved
[    0.230749] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.230753] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230812] system 00:05: [io  0x0800-0x087f] has been reserved
[    0.230816] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230830] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.230854] system 00:07: [io  0x1854-0x1857] has been reserved
[    0.230858] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.231014] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.231017] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.231020] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.231023] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.231026] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.231029] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.231032] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.231035] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.231038] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.231041] system 00:08: [mem 0xdffc0000-0xdffdffff] has been reserved
[    0.231044] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231072] system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.231075] system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.231078] system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.231081] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.231084] system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.231087] system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.231090] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231290] system 00:0a: [io  0xff00-0xfffe] has been reserved
[    0.231294] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.232062] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.232065] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.232068] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.232071] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.232648] pnp: PnP ACPI: found 12 devices
[    0.240652] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.240670] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.240673] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.240677] pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.240681] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.240686] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.240690] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.240694] pci 0000:00:1c.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.240702] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.240704] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.240705] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.240706] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.240708] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.240709] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.240711] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.240712] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.240713] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.240715] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.240733] NET: Registered protocol family 2
[    0.240826] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.240904] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.240982] TCP: Hash tables configured (established 65536 bind 65536)
[    0.240997] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.241014] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.241048] NET: Registered protocol family 1
[    0.251957] pci 0000:01:00.0: Video device with shadowed ROM
[    0.251961] PCI: CLS 64 bytes, default 64
[    0.251993] Unpacking initramfs...
[    0.650978] Freeing initrd memory: 37048K
[    0.651011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.651015] software IO TLB [mem 0x892dd000-0x8d2dd000] (64MB) mapped at [ffff8800892dd000-ffff88008d2dcfff]
[    0.651117] Scanning for low memory corruption every 60 seconds
[    0.651350] audit: initializing netlink subsys (disabled)
[    0.651361] audit: type=2000 audit(1527368604.656:1): initialized
[    0.651629] Initialise system trusted keyring
[    0.651739] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.651742] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.652628] zbud: loaded
[    0.652911] VFS: Disk quotas dquot_6.6.0
[    0.652932] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.653092] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.653265] fuse init (API version 7.23)
[    0.653357] Key type big_key registered
[    0.653376] Allocating IMA MOK and blacklist keyrings.
[    0.654131] Key type asymmetric registered
[    0.654135] Asymmetric key parser 'x509' registered
[    0.654157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.654193] io scheduler noop registered
[    0.654196] io scheduler deadline registered (default)
[    0.654214] io scheduler cfq registered
[    0.654527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.654533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.654555] efifb: probing for efifb
[    0.654566] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
[    0.654569] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.654571] efifb: scrolling: redraw
[    0.654574] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.655689] Console: switching to colour frame buffer device 128x48
[    0.656747] fb0: EFI VGA frame buffer device
[    0.656763] intel_idle: MWAIT substates: 0x142120
[    0.656764] intel_idle: v0.4.1 model 0x5E
[    0.656765] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.656901] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.656922] ACPI: Sleep Button [SLPB]
[    0.656952] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.656972] ACPI: Power Button [PWRB]
[    0.657004] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.657022] ACPI: Power Button [PWRF]
[    0.734571] thermal LNXTHERM:00: registered as thermal_zone0
[    0.734589] ACPI: Thermal Zone [TZ00] (28 C)
[    0.734695] thermal LNXTHERM:01: registered as thermal_zone1
[    0.734710] ACPI: Thermal Zone [TZ01] (30 C)
[    0.734756] GHES: HEST is not enabled!
[    0.734885] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.755494] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.776145] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.780679] Linux agpgart interface v0.103
[    0.782312] loop: module loaded
[    0.782487] libphy: Fixed MDIO Bus: probed
[    0.782499] tun: Universal TUN/TAP device driver, 1.6
[    0.782511] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.782585] PPP generic driver version 2.4.2
[    0.782668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.782685] ehci-pci: EHCI PCI platform driver
[    0.783178] ehci-platform: EHCI generic platform driver
[    0.783677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.784173] ohci-pci: OHCI PCI platform driver
[    0.784672] ohci-platform: OHCI generic platform driver
[    0.785169] uhci_hcd: USB Universal Host Controller Interface driver
[    0.785772] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.786266] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.787861] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.788371] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.788439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.788947] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.789457] usb usb1: Product: xHCI Host Controller
[    0.789960] usb usb1: Manufacturer: Linux 4.4.0-127-generic xhci-hcd
[    0.790477] usb usb1: SerialNumber: 0000:00:14.0
[    0.791150] hub 1-0:1.0: USB hub found
[    0.791659] hub 1-0:1.0: 10 ports detected
[    0.792672] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.793173] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.793696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.794198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.794713] usb usb2: Product: xHCI Host Controller
[    0.795205] usb usb2: Manufacturer: Linux 4.4.0-127-generic xhci-hcd
[    0.795698] usb usb2: SerialNumber: 0000:00:14.0
[    0.796308] hub 2-0:1.0: USB hub found
[    0.796801] hub 2-0:1.0: 4 ports detected
[    0.797631] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.801271] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.801759] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.802442] mousedev: PS/2 mouse device common for all mice
[    0.803258] rtc_cmos 00:06: RTC can wake from S4
[    0.804138] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.804756] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.805220] i2c /dev entries driver
[    0.805738] device-mapper: uevent: version 1.0.3
[    0.806277] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.806768] Intel P-state driver initializing.
[    0.807400] intel_pstate: HWP enabled
[    0.807865] ledtrig-cpu: registered to indicate activity on CPUs
[    0.808380] EFI Variables Facility v0.08 2004-May-17
[    0.832395] NET: Registered protocol family 10
[    0.832995] NET: Registered protocol family 17
[    0.833451] Key type dns_resolver registered
[    0.834024] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0xc2
[    0.834489] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0xc2
[    0.834979] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.835865] registered taskstats version 1
[    0.836334] Loading compiled-in X.509 certificates
[    0.837276] Loaded X.509 cert 'Build time autogenerated kernel key: 9f6f572a3ee0cb468eb8db4aa61815bc74ef6adb'
[    0.837754] zswap: loaded using pool lzo/zbud
[    0.839817] Key type trusted registered
[    0.843020] Key type encrypted registered
[    0.843482] AppArmor: AppArmor sha1 policy hashing enabled
[    0.843944] ima: No TPM chip found, activating TPM-bypass!
[    0.844414] evm: HMAC attrs: 0x1
[    0.845451]   Magic number: 2:689:96
[    0.846101] rtc_cmos 00:06: setting system clock to 2018-05-26 21:03:25 UTC (1527368605)
[    0.846663] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.847120] EDD information not available.
[    0.847627] PM: Hibernation image not present or could not be loaded.
[    0.848380] Freeing unused kernel memory: 1512K
[    0.848840] Write protecting the kernel read-only data: 14336k
[    0.849676] Freeing unused kernel memory: 1692K
[    0.850303] Freeing unused kernel memory: 96K
[    0.859463] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.859807] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.859820] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.860923] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.861403] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.864300] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.864772] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.865228] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.865856] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.866303] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.903813] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.938503] [drm] Initialized drm 1.1.0 20060810
[    0.942811] ahci 0000:00:17.0: version 3.0
[    0.946029] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.947406] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.957207] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffc90000e88000, 4c:cc:6a:af:4b:95, XID 14100800 IRQ 123
[    0.957672] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.958489] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.958954] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.962243] [drm] VGACON disable radeon kernel modesetting.
[    0.962737] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[    0.984794] scsi host0: ahci
[    0.987536] scsi host1: ahci
[    0.990158] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.990652] scsi host2: ahci
[    0.991366] scsi host3: ahci
[    0.991847] ata1: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b100 irq 122
[    0.992312] ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 122
[    0.992776] ata3: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b200 irq 122
[    0.993229] ata4: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b280 irq 122
[    1.102468] usb 1-7: new high-speed USB device number 2 using xhci_hcd
[    1.231252] usb 1-7: New USB device found, idVendor=0409, idProduct=0058
[    1.231691] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.232120] usb 1-7: Product: USB2.0 Hub Controller
[    1.232548] usb 1-7: Manufacturer: NEC Corporation
[    1.233392] hub 1-7:1.0: USB hub found
[    1.233857] hub 1-7:1.0: 4 ports detected
[    1.314498] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.314944] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.315748] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.316186] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8802661fa7d0), AE_NOT_FOUND (20150930/psparse-542)
[    1.317232] ata1.00: ATA-7: GB0250EAFYK, HPG0, max UDMA/133
[    1.317678] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.319103] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.319567] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8802661fa7d0), AE_NOT_FOUND (20150930/psparse-542)
[    1.320692] ata1.00: configured for UDMA/133
[    1.321413] scsi 0:0:0:0: Direct-Access     ATA      GB0250EAFYK      HPG0 PQ: 0 ANSI: 5
[    1.322126] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.322385] ata4: SATA link down (SStatus 4 SControl 300)
[    1.322408] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.322421] sd 0:0:0:0: [sda] Write Protect is off
[    1.322422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.322429] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.326536] ata3: SATA link down (SStatus 4 SControl 300)
[    1.327952] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.328491] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8802661fa7f8), AE_NOT_FOUND (20150930/psparse-542)
[    1.329609] ata2.00: ATAPI: ATAPI   DVD A  DH20A1S, UX14, max UDMA/100
[    1.343101] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.343692] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8802661fa7f8), AE_NOT_FOUND (20150930/psparse-542)
[    1.344860] ata2.00: configured for UDMA/100
[    1.346361] usb 1-9: new high-speed USB device number 3 using xhci_hcd
[    1.347312] scsi 1:0:0:0: CD-ROM            ATAPI    DVD A  DH20A1S   UX14 PQ: 0 ANSI: 5
[    1.364916] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.365263]  sda: sda1 sda2 sda3
[    1.365461] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.366619] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.367238] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.367269] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.479025] usb 1-9: New USB device found, idVendor=03f0, idProduct=e311
[    1.479595] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.480161] usb 1-9: Product: DeskJet 3630 series
[    1.480729] usb 1-9: Manufacturer: HP
[    1.481289] usb 1-9: SerialNumber: CN8265H09B0658
[    1.566480] usb 1-7.2: new low-speed USB device number 4 using xhci_hcd
[    1.650403] tsc: Refined TSC clocksource calibration: 3311.999 MHz
[    1.650997] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd936b72f, max_idle_ns: 440795283163 ns
[    1.681359] usb 1-7.2: New USB device found, idVendor=046d, idProduct=c315
[    1.681998] usb 1-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.682641] usb 1-7.2: Product: Logitech USB Keyboard
[    1.683264] usb 1-7.2: Manufacturer: Logitech
[    1.684064] usb 1-7.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.687864] hidraw: raw HID events driver (C) Jiri Kosina
[    1.692516] usbcore: registered new interface driver usbhid
[    1.693155] usbhid: USB HID core driver
[    1.694938] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.2/1-7.2:1.0/0003:046D:C315.0001/input/input6
[    1.750713] hid-generic 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-7.2/input0
[    1.770408] usb 1-7.3: new high-speed USB device number 5 using xhci_hcd
[    1.877607] usb 1-7.3: New USB device found, idVendor=058f, idProduct=6335
[    1.878234] usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.878870] usb 1-7.3: Product: Mass Storage Device
[    1.879486] usb 1-7.3: Manufacturer: Generic
[    1.880093] usb 1-7.3: SerialNumber: 058F011111B1
[    1.883820] usb-storage 1-7.3:1.0: USB Mass Storage device detected
[    1.884610] scsi host4: usb-storage 1-7.3:1.0
[    1.885237] usbcore: registered new interface driver usb-storage
[    1.886728] usbcore: registered new interface driver uas
[    1.970487] usb 1-7.4: new full-speed USB device number 6 using xhci_hcd
[    2.079764] usb 1-7.4: New USB device found, idVendor=05e3, idProduct=0604
[    2.080319] usb 1-7.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.080870] usb 1-7.4: Product: USB Hub
[    2.081614] usb 1-7.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[    2.083364] hub 1-7.4:1.0: USB hub found
[    2.084955] hub 1-7.4:1.0: 4 ports detected
[    2.366490] usb 1-7.4.1: new low-speed USB device number 7 using xhci_hcd
[    2.460351] usb 1-7.4.1: New USB device found, idVendor=046d, idProduct=c062
[    2.460900] usb 1-7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.461446] usb 1-7.4.1: Product: USB Laser Mouse
[    2.461987] usb 1-7.4.1: Manufacturer: Logitech
[    2.462731] usb 1-7.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.468186] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.1/1-7.4.1:1.0/0003:046D:C062.0002/input/input7
[    2.469528] hid-generic 0003:046D:C062.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-7.4.1/input0
[    2.650755] clocksource: Switched to clocksource tsc
[    2.883338] scsi 4:0:0:0: Direct-Access     SD/MMC   Card  Reader     1.00 PQ: 0 ANSI: 0
[    2.884308] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.886430] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    2.904416] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.330600] random: nonblocking pool is initialized
[    4.056805] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.058094] systemd[1]: Detected architecture x86-64.
[    4.070946] systemd[1]: Set hostname to <PFF>.
[    5.603052] systemd[1]: Listening on udev Control Socket.
[    5.604261] systemd[1]: Listening on Syslog Socket.
[    5.605391] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.606537] systemd[1]: Reached target User and Group Name Lookups.
[    5.607715] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.608978] systemd[1]: Created slice User and Session Slice.
[    5.610176] systemd[1]: Reached target Encrypted Volumes.
[    5.611416] systemd[1]: Created slice System Slice.
[    5.612634] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.613862] systemd[1]: Listening on Journal Audit Socket.
[    5.615071] systemd[1]: Reached target Slices.
[    5.616281] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    5.617507] systemd[1]: Listening on udev Kernel Socket.
[    5.618807] systemd[1]: Listening on Journal Socket.
[    5.634568] systemd[1]: Mounting Debug File System...
[    5.636015] systemd[1]: Mounting POSIX Message Queue File System...
[    5.637436] systemd[1]: Mounting Huge Pages File System...
[    5.638854] systemd[1]: Started Read required files in advance.
[    5.640347] systemd[1]: Starting Uncomplicated firewall...
[    5.641755] systemd[1]: Starting Set console keymap...
[    5.643233] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.062616] systemd[1]: Starting Load Kernel Modules...
[    6.064023] systemd[1]: Started Braille Device Support.
[    6.065340] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.334515] systemd[1]: Reached target Remote File Systems (Pre).
[    6.335709] systemd[1]: Reached target Remote File Systems.
[    6.336966] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.346583] systemd[1]: Starting Journal Service...
[    6.347816] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.348990] systemd[1]: Reached target System Time Synchronized.
[    6.350984] systemd[1]: Mounted POSIX Message Queue File System.
[    6.352180] systemd[1]: Mounted Debug File System.
[    6.353345] systemd[1]: Mounted Huge Pages File System.
[    6.354730] systemd[1]: Started Uncomplicated firewall.
[    6.356007] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.376839] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.712552] systemd[1]: Started Journal Service.
[    6.950720] lp: driver loaded but no devices found
[    6.953126] ppdev: user-space parallel port driver
[    6.973425] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    6.974656] parport0: irq 7 detected
[    7.070644] lp0: using parport0 (polling).
[   19.499012] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   19.524307] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   19.676076] systemd-journald[255]: Received request to flush runtime journal from PID 1
[   20.016430] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.032493] wmi: Mapper loaded
[   20.129028] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   20.747696] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   20.749873] [drm] VGACON disable radeon kernel modesetting.
[   20.749889] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[   20.943219] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
[   20.956988] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   20.956991] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.956993] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.956994] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   20.956995] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   20.956997] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   20.956998] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   20.956999] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   20.965414] SSE version of gcm_enc/dec engaged.
[   20.970897] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   20.970935] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   20.970969] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   20.971001] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   20.971035] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   21.533212] intel_rapl: Found RAPL domain package
[   21.533215] intel_rapl: Found RAPL domain core
[   21.533216] intel_rapl: Found RAPL domain dram
[   23.360648] Adding 8351740k swap on /dev/sda3.  Priority:-1 extents:1 across:8351740k FS
[   23.993933] usblp 1-9:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE311
[   23.993947] usbcore: registered new interface driver usblp
[   24.793547] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   24.824776] JFS: nTxBlock = 8192, nTxLock = 65536
[   24.881509] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   24.953651] QNX4 filesystem 0.2.3 registered.
[   25.038842] raid6: sse2x1   gen() 12022 MB/s
[   25.106843] raid6: sse2x1   xor()  8858 MB/s
[   25.174846] raid6: sse2x2   gen() 14801 MB/s
[   25.242845] raid6: sse2x2   xor() 10241 MB/s
[   25.310849] raid6: sse2x4   gen() 16991 MB/s
[   25.378847] raid6: sse2x4   xor() 11055 MB/s
[   25.378848] raid6: using algorithm sse2x4 gen() 16991 MB/s
[   25.378849] raid6: .... xor() 11055 MB/s, rmw enabled
[   25.378850] raid6: using ssse3x2 recovery algorithm
[   25.388578] xor: measuring software checksum speed
[   25.426875]    prefetch64-sse: 17795.000 MB/sec
[   25.466875]    generic_sse: 16454.000 MB/sec
[   25.466876] xor: using function: prefetch64-sse (17795.000 MB/sec)
[   25.504196] Btrfs loaded
[   67.244090] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   67.318637] r8169 0000:02:00.0 enp2s0: link down
[   67.318666] r8169 0000:02:00.0 enp2s0: link down
[   67.318719] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   71.172835] r8169 0000:02:00.0 enp2s0: link up
[   71.172841] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
munudigbras@ubuntu:~$ B

TRACE2:

munudigbras@ubuntu:~$ cat    /mnt/TRACE2
-- Logs begin at sam. 2018-05-26 23:03:31 CEST, end at sam. 2018-05-26 23:05:06 CEST. --
mai 26 23:03:31 PFF kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
mai 26 23:03:31 PFF kernel: e820: BIOS-provided physical RAM map:
mai 26 23:03:31 PFF kernel: x86/fpu: Using 'eager' FPU context switches.
mai 26 23:03:31 PFF kernel: x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
mai 26 23:03:31 PFF kernel: x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
mai 26 23:03:31 PFF kernel: x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
mai 26 23:03:31 PFF kernel:   Centaur CentaurHauls
mai 26 23:03:31 PFF kernel:   AMD AuthenticAMD
mai 26 23:03:31 PFF kernel:   Intel GenuineIntel
mai 26 23:03:31 PFF kernel: KERNEL supported cpus:
mai 26 23:03:31 PFF kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-127-generic.efi.signed root=UUID=837077e9-e79a-4ef6-9074-00d7363bbaef ro recovery nomodeset
mai 26 23:03:31 PFF kernel: Linux version 4.4.0-127-generic (buildd@lcy01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #153-Ubuntu SMP Sat May 19 10:58:46 UTC 2018 (Ubuntu 4.4.0-127.153-generic 4.4.128)
mai 26 23:03:31 PFF kernel: Initializing cgroup subsys cpuacct
mai 26 23:03:31 PFF kernel: Initializing cgroup subsys cpu
mai 26 23:03:31 PFF kernel: Initializing cgroup subsys cpuset
mai 26 23:03:31 PFF kernel: microcode: CPU0 microcode updated early to revision 0xc2, date = 2017-11-16
mai 26 23:03:31 PFF systemd-journald[255]: Runtime journal (/run/log/journal/) is 8.0M, max 79.4M, 71.4M free.
munudigbras@ubuntu:~$

Voilà !
Il est 23h30 et il est temps de se reposer. Merci pour ton aide (et ta patience...)
à bientot

?? · Le 27/05/2018, à 12:29

Bonjour

Je relève cette erreur dans la trace

  0.962737] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!

Mais je sais qu'elle n'est pas bloquante car j'ai la même dans ma trace

Pour cette erreur

  20.943219] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)

L'anomalie ne devrait être vue que plus tard https://wyldeplayground.net/failed-to-a … ntu-14-04/

Je pense que tu as un problème d'affichage lié a tes cartes graphiques.
Tu pourrais déjà modifier le titre de ta discussion pour préciser "pas d'affichage sur l'écran.

Je vais te demander d'autres traces.
B) Tu rebootes en live USB en mode essayer....

C) Tu montes la partition / avec la commande

sudo mount -v /dev/sda2    /mnt

D) Tu listes la troisième trace via la commande

cat    /mnt/var/log/apport.log