#1 Le 03/06/2019, à 05:34
- bob2019
[Résolu] problème de démarrage sur une architecture 32 bits
Bonjour à toutes et tous,
heureux propriétaire d'un ACER 5610z 
( si si ça existe) tournant sous Lubuntu, celui-ci a décidé de faire des siennes.
Depuis environ un mois le démarrage pose problème, il s'allume et écran noir , acune action supplémentaire, les touches magique ne fonctionne pas, m'obligeant à l'éteindre en mode bourrin avec le bouton ON-OFF, ensuite il démarre en mode RECOVERY MODE et là tout fonctionne normalement. J'ai essayé l'outil réparateur de demarrage mais rien n'y fait.
Voici le rapport produit par le réparateur de demarrage
Si un Mc Gyver linuxien passe par là, je suis ouvert à toutes solutions !!!!
Merci d'avance
Dernière modification par bob2019 (Le 03/06/2019, à 18:55)
Hors ligne
#2 Le 03/06/2019, à 06:11
- xubu1957
Re : [Résolu] problème de démarrage sur une architecture 32 bits
Bonjour,
Collage du Boot-Info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 156,301,311 156,299,264 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 fe030e59-f18a-4a82-abe5-032192af0df1 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jun 3 04:28 ata-Slimtype_DVD_A_DS8A1P -> ../../sr0
lrwxrwxrwx 1 root root 9 Jun 3 06:11 ata-WDC_WD800BEVS-22RST0_WD-WXE207F31609 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 3 06:11 ata-WDC_WD800BEVS-22RST0_WD-WXE207F31609-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jun 3 06:11 wwn-0x50014ee2002328be -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 3 06:11 wwn-0x50014ee2002328be-part1 -> ../../sda1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fe030e59-f18a-4a82-abe5-032192af0df1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
linux /boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-50-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-fe030e59-f18a-4a82-abe5-032192af0df1' {
menuentry 'Ubuntu, avec Linux 4.15.0-50-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-advanced-fe030e59-f18a-4a82-abe5-032192af0df1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
echo 'Chargement de Linux 4.15.0-50-generic…'
linux /boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-50-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-recovery-fe030e59-f18a-4a82-abe5-032192af0df1' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
echo 'Chargement de Linux 4.15.0-50-generic…'
linux /boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-50-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-48-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-48-generic-advanced-fe030e59-f18a-4a82-abe5-032192af0df1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
echo 'Chargement de Linux 4.15.0-48-generic…'
linux /boot/vmlinuz-4.15.0-48-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-48-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-48-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-48-generic-recovery-fe030e59-f18a-4a82-abe5-032192af0df1' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
echo 'Chargement de Linux 4.15.0-48-generic…'
linux /boot/vmlinuz-4.15.0-48-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-48-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 fe030e59-f18a-4a82-abe5-032192af0df1
else
search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=fe030e59-f18a-4a82-abe5-032192af0df1 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
52.331878662 = 56.190926848 boot/grub/grub.cfg 3
48.393016815 = 51.961606144 boot/grub/i386-pc/core.img 1
49.414276123 = 53.058174976 boot/vmlinuz-4.15.0-48-generic 1
47.933807373 = 51.468533760 boot/vmlinuz-4.15.0-50-generic 1
47.933807373 = 51.468533760 vmlinuz 1
49.414276123 = 53.058174976 vmlinuz.old 1
49.190155029 = 52.817526784 boot/initrd.img-4.15.0-48-generic 1
51.448242188 = 55.242129408 boot/initrd.img-4.15.0-50-generic 4
51.448242188 = 55.242129408 initrd.img 4
49.190155029 = 52.817526784 initrd.img.old 1
ADDITIONAL INFORMATION :
=================== log of boot-repair 20190603_0611 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-repair is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, i686)
CPU op-mode(s): 32-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro quiet splash
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04.2 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="fe030e59-f18a-4a82-abe5-032192af0df1" TYPE="ext4" PARTUUID="c7536574-01"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 27 23:49 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars 18 17:11 00_header
-rwxr-xr-x 1 root root 6258 juil. 16 2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 2018 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 2018 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 17 2018 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 17 2018 40_custom
-rwxr-xr-x 1 root root 216 juil. 17 2018 41_custom
-rw-r--r-- 1 root root 483 juil. 17 2018 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:80.0GB:scsi:512:512:msdos:ATA WDC WD800BEVS-22:;
1:1049kB:80.0GB:80.0GB:ext4::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 74,5G
sda1 part ext4 74,5G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1007488k,nr_inodes=208702,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=205092k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12774)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=205088k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 984M 0 984M 0% /dev
tmpfs tmpfs 201M 1.3M 200M 1% /run
/dev/sda1 ext4 73G 39G 31G 57% /
tmpfs tmpfs 1002M 19M 984M 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1002M 0 1002M 0% /sys/fs/cgroup
tmpfs tmpfs 201M 16K 201M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc7536574
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 156301311 156299264 74.5G 83 Linux
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot._ _ _
Vu :
48.393016815 = 51.961606144 boot/grub/i386-pc/core.img 1
49.414276123 = 53.058174976 boot/vmlinuz-4.15.0-48-generic 1
47.933807373 = 51.468533760 boot/vmlinuz-4.15.0-50-generic C'est une architecture 32 bits ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 03/06/2019, à 06:13
- bob2019
Re : [Résolu] problème de démarrage sur une architecture 32 bits
Oups, oui j'ai oublié de le préciser.
Hors ligne
#4 Le 03/06/2019, à 06:14
- xubu1957
Re : [Résolu] problème de démarrage sur une architecture 32 bits
Regarde les messages de malbo > ./viewtopic.php?pid=22091989#p22091989 pour les noyaux récents.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 03/06/2019, à 18:15
- bob2019
Re : [Résolu] problème de démarrage sur une architecture 32 bits
Merci pour la solution et la rapidité , le démarrage est revenu !
Hors ligne
#6 Le 03/06/2019, à 18:20
- xubu1957
Re : [Résolu] problème de démarrage sur une architecture 32 bits
Pour éditer ta discussion et rajouter [Résolu] au début du titre, et aussi sur une architecture 32 bits , il faut utiliser le bouton Modifier au bas de ton premier message.
Pour aider d'autres cas similaires .
[Résolu] problème de démarrage sur une architecture 32 bits
Merci 
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne