Ubuntu-fr

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Je vais engager quelqu'un pour mettre du produit à contacts dans mes prises USB censées être plaquées or donc «sans entretien» puisque je ne peux pas le faire tout seul. C'est dur et chiant d'admettre qu'on ne peut pas tout faire tout seul.

Mon ordinateur sous LibraZiK fonctionne bien et devient plus résiliant avec la limite de taille des journaux réservés aux informaticiens et aux administrateurs de l'ordinateur. Je ne chercherais plus à récupérer les données d'un disque mort. Si le mec n'a pas de sauvegarde alors c'est tant pis pour sa gueule maintenant. Sinon c'est 300€ par heure.

Je retourne à mon étude de projet Arduino sur papier.
(Très efficace : un stylo et du papier pour réfléchir à mes algorithmes qui n'ont même pas besoin de finir en langage assembleur vue la puissance d'exécution des Arduino à 16 MHz.)

Bonne journée à tous !

Dernière modification par Compte supprimé (Le 17/11/2019, à 09:48)

PPdM

Re : Topic des lève-tôt [partie 12]

Je vais engager quelqu'un pour mettre du produit à contacts dans mes prises USB censées être plaquées or donc «sans entretien» puisque je ne peux pas le faire tout seul. C'est dur et chiant d'admettre qu'on ne peut pas tout faire tout seul.

et porqué faire une chose pareille, et quel produit veux tu mettre ?

Tu t'inventes vraiment un tas de soucis que tu es le seul a avoir !

---

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Compte supprimé

Re : Topic des lève-tôt [partie 12]

FACOM, nettoyant contacts, désoxyde et protège.

Dans le lot de prises USB, il y a quelques prises blanches (étain).

En électronique, 90% des pannes viennent des connecteurs. Pareil en audio. (cela touche TOUT LE MONDE = je ne suis pas le seul.)

root n'a pas le droit de redémarrer l'ordinateur car l'USB est prioritaire. Tant que l'USB affiche des erreurs, le reboot doit attendre.

Dernière modification par Compte supprimé (Le 17/11/2019, à 10:17)

Compte supprimé

Re : Topic des lève-tôt [partie 12]

J'ai peut-être trouvé, c'était mon SWITCH d'écran VGA-USB qui déconnait.

J'ai mis du produit à contacts et je n'ai plus une seule erreur USB.

root@LibraZiK2:/home/ludovic# dmesg
[    0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Linux version 4.9.0-11-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT RT Debian 4.9.189-3+deb9u2 (2019-11-11)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-rt-amd64 root=UUID=54e6d0e3-6e89-402d-95c9-3700995b3d31 ro quiet resume=UUID=adb6b405-a476-466b-a76b-a48ffafa961c printk.devkmsg=on libata.noacpi=1
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b5cdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b5ce0000-0x00000000b5ce2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b5ce3000-0x00000000b5ceffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b5cf0000-0x00000000b5cfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G41MT-S2PT/G41MT-S2PT, BIOS FA 08/03/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CBFFF write-protect
[    0.000000]   CC000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 0F00000000 write-back
[    0.000000]   1 base 00C0000000 mask 0FC0000000 uncachable
[    0.000000]   2 base 00B8000000 mask 0FF8000000 uncachable
[    0.000000]   3 base 00B6000000 mask 0FFE000000 uncachable
[    0.000000]   4 base 00B5E00000 mask 0FFFE00000 uncachable
[    0.000000]   5 base 0100000000 mask 0F00000000 write-back
[    0.000000]   6 base 0200000000 mask 0FC0000000 write-back
[    0.000000]   7 base 00B5D00000 mask 0FFFF00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] e820: update [mem 0xb5d00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xb5ce0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5210-0x000f521f] mapped at [ffff8a89400f5210]
[    0.000000] Base memory trampoline at [ffff8a8940099000] 99000 size 24576
[    0.000000] BRK [0xa19a5000, 0xa19a5fff] PGTABLE
[    0.000000] BRK [0xa19a6000, 0xa19a6fff] PGTABLE
[    0.000000] BRK [0xa19a7000, 0xa19a7fff] PGTABLE
[    0.000000] BRK [0xa19a8000, 0xa19a8fff] PGTABLE
[    0.000000] BRK [0xa19a9000, 0xa19a9fff] PGTABLE
[    0.000000] BRK [0xa19aa000, 0xa19aafff] PGTABLE
[    0.000000] BRK [0xa19ab000, 0xa19abfff] PGTABLE
[    0.000000] BRK [0xa19ac000, 0xa19acfff] PGTABLE
[    0.000000] BRK [0xa19ad000, 0xa19adfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3483b000-0x36414fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69E0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000B5CE3040 000050 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000B5CE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000B5CE3180 00423A (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000B5CE0000 000040
[    0.000000] ACPI: MSDM 0x00000000B5CE7500 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 0x00000000B5CE75C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000B5CE7640 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000B5CE7680 006352 (v01 GBT    GBT   B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 0x00000000B5CE7400 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000B5CEE320 00018A (v01 PmRef  Cpu0Cst  00003001 INTL 20040311)
[    0.000000] ACPI: SSDT 0x00000000B5CEE4B0 00018A (v01 PmRef  Cpu1Cst  00003001 INTL 20040311)
[    0.000000] ACPI: SSDT 0x00000000B5CEE640 00018A (v01 PmRef  Cpu2Cst  00003001 INTL 20040311)
[    0.000000] ACPI: SSDT 0x00000000B5CEE7D0 00018A (v01 PmRef  Cpu3Cst  00003001 INTL 20040311)
[    0.000000] ACPI: SSDT 0x00000000B5CEE960 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fff8000-0x23fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b5cdffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.000000] On node 0 totalpages: 2055294
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11572 pages used for memmap
[    0.000000]   DMA32 zone: 740576 pages, LIFO batch:31
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000b6000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb5ce0000-0xb5ce2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb5ce3000-0xb5ceffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb5cf0000-0xb5cfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb5d00000-0xb5ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6000000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 116 pages/cpu s437952 r8192 d28992 u524288
[    0.000000] pcpu-alloc: s437952 r8192 d28992 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2023157
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-rt-amd64 root=UUID=54e6d0e3-6e89-402d-95c9-3700995b3d31 ro quiet resume=UUID=adb6b405-a476-466b-a76b-a48ffafa961c printk.devkmsg=on libata.noacpi=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7979580K/8221176K available (6423K kernel code, 1155K rwdata, 2920K rodata, 1684K init, 856K bss, 241596K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] 	RCU kthread priority: 1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2999.923 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.84 BogoMIPS (lpj=11999692)
[    0.004005] pid_max: default: 32768 minimum: 301
[    0.004015] ACPI: Core revision 20160831
[    0.009305] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.009331] Security Framework initialized
[    0.009332] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009338] AppArmor: AppArmor disabled by boot time parameter
[    0.010529] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes)
[    0.016401] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017835] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.017847] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018232] mce: CPU supports 6 MCE banks
[    0.018238] CPU0: Thermal monitoring enabled (TM2)
[    0.018243] process: using mwait in idle threads
[    0.018247] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.018247] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.018249] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.018250] Spectre V2 : Mitigation: Full generic retpoline
[    0.018251] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.018251] Speculative Store Bypass: Vulnerable
[    0.018253] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.018591] Freeing SMP alternatives memory: 24K
[    0.020008] ftrace: allocating 25288 entries in 99 pages
[    0.036094] smpboot: Max logical packages: 1
[    0.036461] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.132159] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.184022] x86: Booting SMP configuration:
[    0.184024] .... node  #0, CPUs:      #1
[    0.191466] TSC synchronization [CPU#0 -> CPU#1]:
[    0.191467] Measured 7160013 cycles TSC warp between CPUs, turning off TSC clock.
[    0.191470] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.232022]  #2
[    0.280022]  #3
[    0.284076] x86: Booted up 1 node, 4 CPUs
[    0.284076] smpboot: Total of 4 processors activated (23999.38 BogoMIPS)
[    0.288402] devtmpfs: initialized
[    0.288402] x86/mm: Memory block size: 128MB
[    0.294515] PM: Registering ACPI NVS region [mem 0xb5ce0000-0xb5ce2fff] (12288 bytes)
[    0.294515] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.294515] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.294515] pinctrl core: initialized pinctrl subsystem
[    0.294515] NET: Registered protocol family 16
[    0.294515] cpuidle: using governor ladder
[    0.294515] cpuidle: using governor menu
[    0.294515] ACPI: bus type PCI registered
[    0.294515] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.294515] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.294515] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.294515] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.294515] PCI: Using configuration type 1 for base access
[    0.296932] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.296932] ACPI: Added _OSI(Module Device)
[    0.296932] ACPI: Added _OSI(Processor Device)
[    0.296932] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.296932] ACPI: Added _OSI(Processor Aggregator Device)
[    0.300170] ACPI: Dynamic OEM Table Load:
[    0.300176] ACPI: SSDT 0xFFFF8A8B75A56000 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.300330] ACPI: Dynamic OEM Table Load:
[    0.300334] ACPI: SSDT 0xFFFF8A8B75A52200 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.300447] ACPI: Dynamic OEM Table Load:
[    0.300453] ACPI Error: Method parse/execution failed [\_PR.CPU1._PDC] (Node ffff8a8b775b7d70), AE_ALREADY_EXISTS (20160831/psparse-543)
[    0.300646] ACPI: Dynamic OEM Table Load:
[    0.300650] ACPI: SSDT 0xFFFF8A8B758A8200 000152 (v01 PmRef  Cpu2Ist  00003000 INTL 20040311)
[    0.300764] ACPI: Dynamic OEM Table Load:
[    0.300770] ACPI Error: Method parse/execution failed [\_PR.CPU2._PDC] (Node ffff8a8b775b7488), AE_ALREADY_EXISTS (20160831/psparse-543)
[    0.300959] ACPI: Dynamic OEM Table Load:
[    0.300963] ACPI: SSDT 0xFFFF8A8B75AA7200 000152 (v01 PmRef  Cpu3Ist  00003000 INTL 20040311)
[    0.301076] ACPI: Dynamic OEM Table Load:
[    0.301081] ACPI Error: Method parse/execution failed [\_PR.CPU3._PDC] (Node ffff8a8b775b7500), AE_ALREADY_EXISTS (20160831/psparse-543)
[    0.301389] ACPI: Interpreter enabled
[    0.301405] ACPI: (supports S0 S3 S4 S5)
[    0.301406] ACPI: Using IOAPIC for interrupt routing
[    0.301426] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.305736] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305741] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.305745] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.305953] PCI host bridge to bus 0000:00
[    0.305955] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.305957] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.305958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.305960] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.305961] pci_bus 0000:00: root bus resource [mem 0xb5d00000-0xfebfffff window]
[    0.305963] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.305971] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.305989] DMAR: Forcing write-buffer flush capability
[    0.305990] DMAR: Disabling IOMMU for graphics on this chipset
[    0.306073] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[    0.306105] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.306184] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[    0.306193] pci 0000:00:02.0: reg 0x10: [mem 0xdf400000-0xdf7fffff 64bit]
[    0.306199] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.306203] pci 0000:00:02.0: reg 0x20: [io  0xff00-0xff07]
[    0.306321] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.306334] pci 0000:00:1b.0: reg 0x10: [mem 0xdfff8000-0xdfffbfff 64bit]
[    0.306395] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.306444] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.306492] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.306552] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.306601] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.306648] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.306708] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.306757] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.306805] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.306838] pci 0000:00:1d.0: reg 0x20: [io  0xfe00-0xfe1f]
[    0.306899] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.306944] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.306977] pci 0000:00:1d.1: reg 0x20: [io  0xfd00-0xfd1f]
[    0.307039] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.307083] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.307116] pci 0000:00:1d.2: reg 0x20: [io  0xfc00-0xfc1f]
[    0.307177] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.307220] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.307253] pci 0000:00:1d.3: reg 0x20: [io  0xfb00-0xfb1f]
[    0.307314] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.307364] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.307377] pci 0000:00:1d.7: reg 0x10: [mem 0xdffff000-0xdffff3ff]
[    0.307480] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.307534] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.307613] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.307660] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.307729] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.307733] pci 0000:00:1f.0: quirk: [io  0x0580-0x05bf] claimed by ICH6 GPIO
[    0.307735] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.307738] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.307841] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[    0.307852] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.307858] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.307864] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.307870] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.307877] pci 0000:00:1f.2: reg 0x20: [io  0xf800-0xf80f]
[    0.307890] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.307892] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.307893] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.307894] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.307913] pci 0000:00:1f.2: PME# supported from D3hot
[    0.308010] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.308054] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.308208] pci 0000:01:00.0: [1987:5012] type 00 class 0x010802
[    0.308254] pci 0000:01:00.0: reg 0x10: [mem 0xdfefc000-0xdfefffff 64bit]
[    0.308635] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.308638] pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.308697] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[    0.308720] pci 0000:02:00.0: reg 0x10: [mem 0xdfcff000-0xdfcfffff 64bit]
[    0.308816] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.320016] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.320023] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.320123] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.320140] pci 0000:03:00.0: reg 0x10: [io  0xce00-0xceff]
[    0.320165] pci 0000:03:00.0: reg 0x18: [mem 0xdfbff000-0xdfbfffff 64bit pref]
[    0.320181] pci 0000:03:00.0: reg 0x20: [mem 0xdfbf8000-0xdfbfbfff 64bit pref]
[    0.320262] pci 0000:03:00.0: supports D1 D2
[    0.320263] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.332015] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.332020] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.332027] pci 0000:00:1c.1:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[    0.332089] pci 0000:04:01.0: [1106:3044] type 00 class 0x0c0010
[    0.332120] pci 0000:04:01.0: reg 0x10: [mem 0xdfdff000-0xdfdff7ff]
[    0.332129] pci 0000:04:01.0: reg 0x14: [io  0xdf00-0xdf7f]
[    0.332191] pci 0000:04:01.0: supports D2
[    0.332193] pci 0000:04:01.0: PME# supported from D2 D3hot D3cold
[    0.332271] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.332274] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.332277] pci 0000:00:1e.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.332282] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.332283] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.332285] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.332286] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.332288] pci 0000:00:1e.0:   bridge window [mem 0xb5d00000-0xfebfffff window] (subtractive decode)
[    0.332837] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.332890] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.332943] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.332996] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.333053] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.333106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.333158] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.333211] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.333315] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.333411] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.333411] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.333411] vgaarb: loaded
[    0.333411] vgaarb: bridge control possible 0000:00:02.0
[    0.333411] PCI: Using ACPI for IRQ routing
[    0.340040] PCI: pci_cache_line_size set to 64 bytes
[    0.340085] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.340086] e820: reserve RAM buffer [mem 0xb5ce0000-0xb7ffffff]
[    0.340226] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.340226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.340226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.344037] clocksource: Switched to clocksource hpet
[    0.355778] VFS: Disk quotas dquot_6.6.0
[    0.355803] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.355908] pnp: PnP ACPI init
[    0.356105] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.356107] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.356109] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.356111] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.356113] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.356117] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.356192] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.356458] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.356526] system 00:03: [io  0x0400-0x047f] has been reserved
[    0.356530] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.356727] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.356730] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.356895] system 00:05: [mem 0x000cc800-0x000cffff] has been reserved
[    0.356898] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.356900] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.356901] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.356903] system 00:05: [mem 0xb5ce0000-0xb5ceffff] could not be reserved
[    0.356905] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.356907] system 00:05: [mem 0x00100000-0xb5cdffff] could not be reserved
[    0.356909] system 00:05: [mem 0xb5cf0000-0xb5cfffff] has been reserved
[    0.356911] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.356913] system 00:05: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.356915] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.356916] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.356918] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.356920] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[    0.356922] system 00:05: [mem 0x000e0000-0x000effff] has been reserved
[    0.356925] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.356930] pnp: PnP ACPI: found 6 devices
[    0.365837] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.365854] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.365856] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.365863] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
[    0.365875] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.365877] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.365879] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.365881] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.365882] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.365884] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.365891] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb5d00000-0xb5efffff 64bit pref]
[    0.365893] pci 0000:00:1c.1: BAR 14: assigned [mem 0xd0000000-0xd03fffff]
[    0.365896] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.365899] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.365902] pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.365906] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.365908] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.365912] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.365915] pci 0000:00:1c.0:   bridge window [mem 0xb5d00000-0xb5efffff 64bit pref]
[    0.365919] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.365921] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.365925] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd03fffff]
[    0.365928] pci 0000:00:1c.1:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[    0.365933] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.365935] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.365939] pci 0000:00:1e.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.365945] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.365947] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.365949] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.365950] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.365952] pci_bus 0000:00: resource 8 [mem 0xb5d00000-0xfebfffff window]
[    0.365953] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.365955] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.365957] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.365958] pci_bus 0000:02: resource 2 [mem 0xb5d00000-0xb5efffff 64bit pref]
[    0.365960] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.365961] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd03fffff]
[    0.365963] pci_bus 0000:03: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
[    0.365964] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.365966] pci_bus 0000:04: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.365967] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.365969] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.365970] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.365972] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.365973] pci_bus 0000:04: resource 8 [mem 0xb5d00000-0xfebfffff window]
[    0.366041] NET: Registered protocol family 2
[    0.366257] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.366749] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    0.367838] TCP: Hash tables configured (established 65536 bind 65536)
[    0.367929] UDP hash table entries: 4096 (order: 7, 524288 bytes)
[    0.368160] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes)
[    0.368393] NET: Registered protocol family 1
[    0.368412] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.388151] pci 0000:00:1c.0: enabling device (0006 -> 0007)
[    0.388301] PCI: CLS 4 bytes, default 64
[    0.388371] Unpacking initramfs...
[    0.782631] Freeing initrd memory: 28520K
[    0.782636] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.782638] software IO TLB: mapped [mem 0xb1ce0000-0xb5ce0000] (64MB)
[    0.782699] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3dfc90a6d, max_idle_ns: 440795264357 ns
[    0.783162] audit: initializing netlink subsys (disabled)
[    0.783189] audit: type=2000 audit(1573978144.780:1): initialized
[    0.783768] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.786044] zbud: loaded
[    0.787534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.787613] io scheduler noop registered
[    0.787615] io scheduler deadline registered
[    0.787652] io scheduler cfq registered (default)
[    0.788198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.788204] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.788219] intel_idle: does not run on family 6 model 23
[    0.788793] GHES: HEST is not enabled!
[    0.788886] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.789391] Linux agpgart interface v0.103
[    0.789578] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.789579] AMD IOMMUv2 functionality not available on this system
[    0.789941] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.789942] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.790148] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.790287] mousedev: PS/2 mouse device common for all mice
[    0.790332] rtc_cmos 00:01: RTC can wake from S4
[    0.790451] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.790538] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.790971] NET: Registered protocol family 10
[    0.791213] mip6: Mobile IPv6
[    0.791215] NET: Registered protocol family 17
[    0.791235] mpls_gso: MPLS GSO support
[    0.791460] microcode: sig=0x10676, pf=0x40, revision=0x60f
[    0.791540] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.791732] registered taskstats version 1
[    0.791753] zswap: loaded using pool lzo/zbud
[    0.791797] ima: No TPM chip found, activating TPM-bypass!
[    0.791799] ima: Allocated hash algorithm: sha256
[    0.792087] rtc_cmos 00:01: setting system clock to 2019-11-17 08:09:05 UTC (1573978145)
[    0.792132] PM: Checking hibernation image partition UUID=adb6b405-a476-466b-a76b-a48ffafa961c
[    0.812469] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.812568] PM: Hibernation image not present or could not be loaded.
[    0.814067] Freeing unused kernel memory: 1684K
[    0.814068] Write protecting the kernel read-only data: 12288k
[    0.814896] Freeing unused kernel memory: 1752K
[    0.817480] Freeing unused kernel memory: 1176K
[    0.822587] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.934597] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.934608] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.937666] nvme nvme0: pci function 0000:01:00.0
[    0.947288] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffa6ee41481000, 50:e5:49:a7:97:d6, XID 0c900800 IRQ 27
[    0.947290] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.953815] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.956467] ACPI: bus type USB registered
[    0.959341] usbcore: registered new interface driver usbfs
[    0.960650] usbcore: registered new interface driver hub
[    0.961656] usbcore: registered new device driver usb
[    0.965675] SCSI subsystem initialized
[    0.973739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.980290] ehci-pci: EHCI PCI platform driver
[    0.980596] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.980788] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    0.981037] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[    0.981204] uhci_hcd: USB Universal Host Controller Interface driver
[    0.982654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.982656] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.982658] usb usb1: Product: xHCI Host Controller
[    0.982659] usb usb1: Manufacturer: Linux 4.9.0-11-rt-amd64 xhci-hcd
[    0.982661] usb usb1: SerialNumber: 0000:02:00.0
[    0.984182] libata version 3.00 loaded.
[    0.993732] hub 1-0:1.0: USB hub found
[    0.993748] hub 1-0:1.0: 1 port detected
[    0.999363] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.999945] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.999950] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.999980] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.000030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.000033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000034] usb usb2: Product: xHCI Host Controller
[    1.000036] usb usb2: Manufacturer: Linux 4.9.0-11-rt-amd64 xhci-hcd
[    1.000037] usb usb2: SerialNumber: 0000:02:00.0
[    1.000078] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.002983] hub 2-0:1.0: USB hub found
[    1.003000] hub 2-0:1.0: 4 ports detected
[    1.008772] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.012695] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[    1.012784] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdffff000
[    1.028040] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.028605] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.028608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.028609] usb usb3: Product: EHCI Host Controller
[    1.028610] usb usb3: Manufacturer: Linux 4.9.0-11-rt-amd64 ehci_hcd
[    1.028612] usb usb3: SerialNumber: 0000:00:1d.7
[    1.044065] firewire_ohci 0000:04:01.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x41
[    1.054311] hub 3-0:1.0: USB hub found
[    1.054327] hub 3-0:1.0: 8 ports detected
[    1.083494]  nvme0n1: p2 p3
[    1.093468] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.093776] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.093788] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.093863] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[    1.093999] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.094001] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.094004] usb usb4: Product: UHCI Host Controller
[    1.094005] usb usb4: Manufacturer: Linux 4.9.0-11-rt-amd64 uhci_hcd
[    1.094007] usb usb4: SerialNumber: 0000:00:1d.0
[    1.117418] hub 4-0:1.0: USB hub found
[    1.117443] hub 4-0:1.0: 2 ports detected
[    1.132435] ata_piix 0000:00:1f.2: version 2.13
[    1.132562] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.133926] scsi host0: ata_piix
[    1.134104] scsi host1: ata_piix
[    1.134178] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[    1.134180] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[    1.134322] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.134328] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.134335] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.134394] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[    1.134497] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.134499] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.134501] usb usb5: Product: UHCI Host Controller
[    1.134502] usb usb5: Manufacturer: Linux 4.9.0-11-rt-amd64 uhci_hcd
[    1.134504] usb usb5: SerialNumber: 0000:00:1d.1
[    1.134677] hub 5-0:1.0: USB hub found
[    1.134693] hub 5-0:1.0: 2 ports detected
[    1.134939] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.134944] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.134949] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.135042] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[    1.135100] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.135102] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.135104] usb usb6: Product: UHCI Host Controller
[    1.135105] usb usb6: Manufacturer: Linux 4.9.0-11-rt-amd64 uhci_hcd
[    1.135107] usb usb6: SerialNumber: 0000:00:1d.2
[    1.135277] hub 6-0:1.0: USB hub found
[    1.135293] hub 6-0:1.0: 2 ports detected
[    1.135519] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.135525] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[    1.135530] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.135620] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[    1.135717] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.135719] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.135720] usb usb7: Product: UHCI Host Controller
[    1.135722] usb usb7: Manufacturer: Linux 4.9.0-11-rt-amd64 uhci_hcd
[    1.135723] usb usb7: SerialNumber: 0000:00:1d.3
[    1.135877] hub 7-0:1.0: USB hub found
[    1.135892] hub 7-0:1.0: 2 ports detected
[    1.298586] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66
[    1.303219] ata2.00: configured for UDMA/66
[    1.312546] ata1.00: ATA-8: KINGSTON SVP200S37A60G, 502ABBF0, max UDMA/133
[    1.312549] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.320043] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.336520] ata1.00: configured for UDMA/133
[    1.336756] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SVP200S BBF0 PQ: 0 ANSI: 5
[    1.389019] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S202J  SB01 PQ: 0 ANSI: 5
[    1.406115] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    1.406249] sd 0:0:0:0: [sda] Write Protect is off
[    1.406251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.406287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.408045] usb 3-4: new high-speed USB device number 2 using ehci-pci
[    1.409720]  sda: sda1 sda2 sda3
[    1.410156] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.418068] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.418069] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.418633] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.462356] usb 1-1: New USB device found, idVendor=2109, idProduct=3431
[    1.462363] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.462365] usb 1-1: Product: USB2.0 Hub
[    1.468268] hub 1-1:1.0: USB hub found
[    1.468434] hub 1-1:1.0: 4 ports detected
[    1.521515] random: fast init done
[    1.521815] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.521822] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.521920] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.568140] firewire_core 0000:04:01.0: created device fw0: GUID 000a4800000005e7, S400
[    1.580341] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.603237] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3312
[    1.603239] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.603240] usb 2-1: Product: Expansion Desk
[    1.603242] usb 2-1: Manufacturer: Seagate 
[    1.603243] usb 2-1: SerialNumber: NA4KX31S
[    1.612049] raid6: sse2x1   gen()  5074 MB/s
[    1.680027] raid6: sse2x1   xor()  5020 MB/s
[    1.728551] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[    1.748032] raid6: sse2x2   gen()  7797 MB/s
[    1.816032] raid6: sse2x2   xor()  6125 MB/s
[    1.821168] usb 2-2: New USB device found, idVendor=05e3, idProduct=0616
[    1.821170] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.821171] usb 2-2: Product: USB3.0 Hub
[    1.821177] usb 2-2: Manufacturer: GenesysLogic
[    1.822370] hub 2-2:1.0: USB hub found
[    1.822805] hub 2-2:1.0: 4 ports detected
[    1.826992] usbcore: registered new interface driver usb-storage
[    1.829393] scsi host2: uas
[    1.829480] usbcore: registered new interface driver uas
[    1.843591] scsi 2:0:0:0: Direct-Access     Seagate  Expansion Desk   0739 PQ: 0 ANSI: 6
[    1.884042] raid6: sse2x4   gen()  9009 MB/s
[    1.884715] usb 3-4: New USB device found, idVendor=0781, idProduct=5583
[    1.884717] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.884719] usb 3-4: Product: Ultra Fit
[    1.884720] usb 3-4: Manufacturer: SanDisk
[    1.884722] usb 3-4: SerialNumber: 010173660922562e3a0b0905df2011ea79b46da4890207d555e58f73f3ef98c79c250000000000000000000090c7a1f4ff9d1a00835581076926e444
[    1.885241] usb-storage 3-4:1.0: USB Mass Storage device detected
[    1.885327] scsi host3: usb-storage 3-4:1.0
[    1.952034] raid6: sse2x4   xor()  6988 MB/s
[    1.952036] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
[    1.952038] raid6: using algorithm sse2x4 gen() 9009 MB/s
[    1.952040] raid6: .... xor() 6988 MB/s, rmw enabled
[    1.952041] raid6: using ssse3x2 recovery algorithm
[    1.952342] xor: measuring software checksum speed
[    1.992028]    prefetch64-sse: 11567.000 MB/sec
[    2.004032] usb 3-8: new high-speed USB device number 3 using ehci-pci
[    2.032036]    generic_sse: 10294.000 MB/sec
[    2.032038] xor: using function: prefetch64-sse (11567.000 MB/sec)
[    2.063754] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0610
[    2.063757] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.063759] usb 1-1.2: Product: USB2.0 Hub
[    2.063761] usb 1-1.2: Manufacturer: GenesysLogic
[    2.065140] hub 1-1.2:1.0: USB hub found
[    2.066522] hub 1-1.2:1.0: 4 ports detected
[    2.086651] Btrfs loaded, crc32c=crc32c-generic
[    2.103635] sd 2:0:0:0: [sdb] Spinning up disk...
[    2.186473] usb 3-8: New USB device found, idVendor=05e3, idProduct=0610
[    2.186476] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.186479] usb 3-8: Product: USB2.0 Hub
[    2.186481] usb 3-8: Manufacturer: GenesysLogic
[    2.187568] hub 3-8:1.0: USB hub found
[    2.187970] hub 3-8:1.0: 4 ports detected
[    2.364032] usb 1-1.2.4: new high-speed USB device number 4 using xhci_hcd
[    2.464416] usb 1-1.2.4: New USB device found, idVendor=1a40, idProduct=0101
[    2.464419] usb 1-1.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.464421] usb 1-1.2.4: Product: USB 2.0 Hub
[    2.465283] hub 1-1.2.4:1.0: USB hub found
[    2.465341] hub 1-1.2.4:1.0: 4 ports detected
[    2.476042] usb 3-8.4: new full-speed USB device number 4 using ehci-pci
[    2.586589] usb 3-8.4: New USB device found, idVendor=1290, idProduct=0020
[    2.586592] usb 3-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.586594] usb 3-8.4: Product: i2 mini 32
[    2.586596] usb 3-8.4: Manufacturer: MIDITECH
[    2.586598] usb 3-8.4: SerialNumber: MIDITECH-1290-0020-001101
[    2.772036] usb 1-1.2.4.2: new full-speed USB device number 5 using xhci_hcd
[    2.901085] usb 1-1.2.4.2: New USB device found, idVendor=062a, idProduct=5918
[    2.901088] usb 1-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.901090] usb 1-1.2.4.2: Product: 2.4G Keyboard Mouse
[    2.901092] usb 1-1.2.4.2: Manufacturer: MOSART Semi.
[    2.908743] scsi 3:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[    2.948484] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[    3.000033] usb 1-1.2.4.3: new low-speed USB device number 6 using xhci_hcd
[    3.124752] usb 1-1.2.4.3: New USB device found, idVendor=0413, idProduct=0308
[    3.124755] usb 1-1.2.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.132031] .
[    3.132324] hidraw: raw HID events driver (C) Jiri Kosina
[    3.157342] usbcore: registered new interface driver usbhid
[    3.157343] usbhid: USB HID core driver
[    3.158565] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.2/1-1.2.4.2:1.0/0003:062A:5918.0001/input/input1
[    3.216209] hid-generic 0003:062A:5918.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:02:00.0-1.2.4.2/input0
[    3.216709] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.2/1-1.2.4.2:1.1/0003:062A:5918.0002/input/input2
[    3.276622] hid-generic 0003:062A:5918.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:02:00.0-1.2.4.2/input1
[    3.276845] input: HID 0413:0308 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/0003:0413:0308.0003/input/input3
[    3.336193] hid-generic 0003:0413:0308.0003: input,hidraw2: USB HID v1.10 Keyboard [HID 0413:0308] on usb-0000:02:00.0-1.2.4.3/input0
[    3.336628] input: HID 0413:0308 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.1/0003:0413:0308.0004/input/input4
[    3.396210] hid-generic 0003:0413:0308.0004: input,hidraw3: USB HID v1.10 Mouse [HID 0413:0308] on usb-0000:02:00.0-1.2.4.3/input1
[    4.188039] .
[    5.244041] .
[    6.300039] .
[    7.356037] .
[    8.412031] .
[    9.468039] .
[   10.524037] .
[   11.580040] .
[   12.183833] PM: Starting manual resume from disk
[   12.183836] PM: Hibernation image partition 259:1 present
[   12.183837] PM: Looking for hibernation image.
[   12.183982] PM: Image not found (code -22)
[   12.183983] PM: Hibernation image not present or could not be loaded.
[   12.636041] .
[   13.692040] .
[   13.709040] ready
[   13.709222] sd 2:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.73 TiB)
[   13.710003] sd 2:0:0:0: [sdb] Write Protect is off
[   13.710007] sd 2:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[   13.710838] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   13.796179]  sdb: sdb1
[   13.815352] sd 2:0:0:0: [sdb] Attached SCSI disk
[   14.181374] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.347526] systemd[1]: Inserted module 'autofs4'
[   14.354361] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.360517] cgroup: cgroup2: unknown option "nsdelegate"
[   14.368627] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   14.368772] systemd[1]: Detected architecture x86-64.
[   14.370006] systemd[1]: Set hostname to <LibraZiK2>.
[   14.372470] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[   14.411573] systemd-fstab-generator[242]: Mount point ignore is not a valid path, ignoring.
[   14.432795] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   14.432800] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   14.516132] systemd[1]: /lib/systemd/system/autofs.service:7: PIDFile= references path below legacy directory /var/run/, updating /var/run/autofs.pid → /run/autofs.pid; please update the unit file accordingly.
[   14.523328] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   14.523503] systemd[1]: Listening on Journal Socket (/dev/log).
[   14.523611] systemd[1]: Listening on LVM2 poll daemon socket.
[   14.523695] systemd[1]: Listening on udev Kernel Socket.
[   14.523768] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   14.523870] systemd[1]: Listening on LVM2 metadata daemon socket.
[   14.523974] systemd[1]: Listening on Syslog Socket.
[   14.524656] systemd[1]: Created slice system-getty.slice.
[   14.526330] systemd[1]: Listening on RPCbind Server Activation Socket.
[   14.526428] systemd[1]: Listening on fsck to fsckd communication Socket.
[   14.526658] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   14.526768] systemd[1]: Listening on udev Control Socket.
[   14.526976] systemd[1]: Created slice User and Session Slice.
[   14.526996] systemd[1]: Reached target Slices.
[   14.527222] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   14.527302] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   14.527322] systemd[1]: Reached target User and Group Name Lookups.
[   14.527459] systemd[1]: Listening on Journal Audit Socket.
[   14.527584] systemd[1]: Listening on Journal Socket.
[   14.529960] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   14.529994] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[   14.530902] systemd[1]: Starting Journal Service...
[   14.530967] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   14.532631] systemd[1]: Starting Remount Root and Kernel File Systems...
[   14.536583] systemd[1]: Starting Set the console keyboard layout...
[   14.537935] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   14.538956] systemd[1]: Mounting RPC Pipe File System...
[   14.540353] systemd[1]: Mounting Kernel Debug File System...
[   14.541670] systemd[1]: Starting udev Coldplug all Devices...
[   14.544285] systemd[1]: Mounting POSIX Message Queue File System...
[   14.545779] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   14.547460] systemd[1]: Mounting Huge Pages File System...
[   14.547754] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.547789] systemd[1]: Reached target Local Encrypted Volumes.
[   14.552400] systemd[1]: Starting Load Kernel Modules...
[   14.554023] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   14.577517] systemd[1]: Mounted POSIX Message Queue File System.
[   14.577622] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.583448] lp: driver loaded but no devices found
[   14.594448] systemd[1]: Started Remount Root and Kernel File Systems.
[   14.594709] systemd[1]: Mounted Kernel Debug File System.
[   14.594799] ppdev: user-space parallel port driver
[   14.594907] systemd[1]: Mounted Huge Pages File System.
[   14.606133] RPC: Registered named UNIX socket transport module.
[   14.606135] RPC: Registered udp transport module.
[   14.606136] RPC: Registered tcp transport module.
[   14.606137] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.612508] systemd[1]: Started LVM2 metadata daemon.
[   14.613003] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   14.625145] systemd[1]: Starting Load/Save Random Seed...
[   14.641673] it87: Found IT8718F chip at 0x290, revision 8
[   14.641693] it87: Beeping is supported
[   14.644955] systemd[1]: Starting Create System Users...
[   14.652448] systemd[1]: Mounted RPC Pipe File System.
[   14.671155] systemd[1]: Started Load/Save Random Seed.
[   14.683431] systemd[1]: Started Load Kernel Modules.
[   14.698098] systemd[1]: Started Create System Users.
[   14.713687] systemd[1]: Started Set the console keyboard layout.
[   14.738478] systemd[1]: Starting Create Static Device Nodes in /dev...
[   14.758836] systemd[1]: Starting Apply Kernel Variables...
[   14.759123] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[   14.759422] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[   14.771738] systemd[1]: Started Create Static Device Nodes in /dev.
[   14.783179] systemd[1]: Started Apply Kernel Variables.
[   14.801265] systemd[1]: Starting udev Kernel Device Manager...
[   14.861077] systemd[1]: Started udev Kernel Device Manager.
[   14.989860] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   14.990095] systemd[1]: Reached target Local File Systems (Pre).
[   15.167646] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   15.167653] ACPI: Power Button [PWRB]
[   15.174506] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.198235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   15.198239] ACPI: Power Button [PWRF]
[   15.214897] intel_rng: FWH not detected
[   15.222190] [drm] Initialized
[   15.374176] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160831/utaddress-247)
[   15.374186] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.389517] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.438371] leds_ss4200: no LED devices found
[   15.520820] pci 0000:00:00.0: Intel G41 Chipset
[   15.520840] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   15.522520] pci 0000:00:00.0: detected 163840K stolen memory
[   15.522576] [drm] Memory usable by graphics device = 2048M
[   15.522582] [drm] Replacing VGA console driver
[   15.538178] Console: switching to colour dummy device 80x25
[   15.550302] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.550304] [drm] Driver supports precise vblank timestamp query.
[   15.604158] iTCO_vendor_support: vendor-support=0
[   15.620140] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   15.634665] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.636912] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   15.636968] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   15.653374] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   15.663912] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   15.669692] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   15.671477] [drm] RC6 disabled, disabling runtime PM support
[   15.676200] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.728530] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   15.825271] fbcon: inteldrmfb (fb0) is primary device
[   15.878531] Console: switching to colour frame buffer device 240x67
[   15.917508] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.923473] intel_powerclamp: No package C-state available
[   16.000865] systemd[1]: Found device Force MP510 2.
[   16.012694] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.012698] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.012699] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.012701] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   16.012703] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   16.012706] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   16.012708] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   16.012709] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   16.012711] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[   16.020930] systemd[1]: Found device Force MP510 3.
[   16.025435] intel_powerclamp: No package C-state available
[   16.096337] intel_powerclamp: No package C-state available
[   16.125040] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.139838] systemd[1]: Starting File System Check on /dev/disk/by-uuid/90e3fb09-471c-4c27-ade6-452fa7bcc2a5...
[   16.174137] intel_powerclamp: No package C-state available
[   16.226645] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.252932] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.261459] systemd[1]: Activating swap /dev/disk/by-uuid/adb6b405-a476-466b-a76b-a48ffafa961c...
[   16.273230] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.290424] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.298962] Adding 9215996k swap on /dev/nvme0n1p2.  Priority:-1 extents:1 across:9215996k SSFS
[   16.310857] systemd[1]: Started udev Coldplug all Devices.
[   16.399754] systemd[1]: Activated swap /dev/disk/by-uuid/adb6b405-a476-466b-a76b-a48ffafa961c.
[   16.406549] usbcore: registered new interface driver snd-usb-audio
[   16.431975] systemd[1]: Started File System Check on /dev/disk/by-uuid/90e3fb09-471c-4c27-ade6-452fa7bcc2a5.
[   16.517277] systemd[1]: Found device KINGSTON_SVP200S37A60G 3.
[   16.522937] systemd[1]: Reached target Sound Card.
[   16.599051] systemd[1]: Started File System Check Daemon to report status.
[   16.663867] systemd[1]: Mounting /home...
[   16.703003] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[   16.717547] systemd[1]: Activating swap /dev/disk/by-uuid/219d9a32-f7cc-4fd6-bc5a-9b2478035890...
[   16.744433] Adding 4198396k swap on /dev/sda3.  Priority:-2 extents:1 across:4198396k SSFS
[   16.848253] systemd[1]: Activated swap /dev/disk/by-uuid/219d9a32-f7cc-4fd6-bc5a-9b2478035890.
[   16.848489] systemd[1]: Mounted /home.
[   16.886341] systemd[1]: Reached target Swap.
[   16.886465] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   16.927774] systemd[1]: Mounting /tmp...
[   16.975477] systemd[1]: Mounted /tmp.
[   16.977044] systemd[1]: Reached target Local File Systems.
[   17.015779] systemd[1]: Starting Set console font and keymap...
[   17.015885] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[   17.050841] systemd[1]: Starting Preprocess NFS configuration...
[   17.081160] systemd[1]: Starting Raise network interfaces...
[   17.128292] systemd[1]: Starting Enable support for additional executable binary formats...
[   17.167364] systemd[1]: Started Set console font and keymap.
[   17.183232] systemd[1]: nfs-config.service: Succeeded.
[   17.222911] systemd[1]: Started Preprocess NFS configuration.
[   17.273251] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 581 (update-binfmts)
[   17.310702] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[   17.310768] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[   17.310821] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[   17.310862] systemd[1]: Reached target NFS client services.
[   17.325760] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[   17.330314] systemd[1]: Started Enable support for additional executable binary formats.
[   17.365309] systemd[1]: Started Raise network interfaces.
[   17.375138] systemd[1]: Started Journal Service.
[   17.386648] systemd-journald[251]: Received request to flush runtime journal from PID 1
[   17.714395] random: crng init done
[   17.714398] random: 7 urandom warning(s) missed due to ratelimiting
[   18.054796] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   18.057603] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   18.189579] r8169 0000:03:00.0 enp3s0: link down
[   18.189581] r8169 0000:03:00.0 enp3s0: link down
[   18.189700] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   20.457220] r8169 0000:03:00.0 enp3s0: link up
[   20.457231] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   20.590178] vboxdrv: loading out-of-tree module taints kernel.
[   20.597336] vboxdrv: Found 4 processor cores
[   20.599719] vboxdrv: fAsync=1 offMin=0x6d2615 offMax=0x6d2615
[   20.700243] vboxdrv: TSC mode is Asynchronous, tentative frequency 2999981790 Hz
[   20.700246] vboxdrv: Successfully loaded version 5.2.24_Debian (interface 0x00290001)
[   20.712134] VBoxNetFlt: Successfully started.
[   20.723993] VBoxNetAdp: Successfully started.
[   20.742156] VBoxPciLinuxInit
[   20.743913] vboxpci: IOMMU not found (not registered)
[   52.338430] EXT4-fs (sdb1): recovery complete
[   52.338789] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  621.508034] usb 3-8.2: new high-speed USB device number 5 using ehci-pci
[  621.625843] usb 3-8.2: New USB device found, idVendor=152d, idProduct=8561
[  621.625845] usb 3-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[  621.625847] usb 3-8.2: Product: JMS56x Series
[  621.625848] usb 3-8.2: Manufacturer: JMicron
[  621.625850] usb 3-8.2: SerialNumber: 00A123456884
[  621.627491] scsi host4: uas
[  621.632849] scsi 4:0:0:0: Direct-Access     SAMSUNG  HD204UI          0107 PQ: 0 ANSI: 6
[  621.678596] scsi 4:0:0:1: Direct-Access     WDC WD50 00AADS-11M2B1    0107 PQ: 0 ANSI: 6
[  621.729047] sd 4:0:0:0: Attached scsi generic sg4 type 0
[  621.729605] sd 4:0:0:1: Attached scsi generic sg5 type 0
[  621.729728] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[  621.731092] sd 4:0:0:1: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[  621.732723] sd 4:0:0:0: [sdd] Write Protect is off
[  621.732725] sd 4:0:0:0: [sdd] Mode Sense: 67 00 10 08
[  621.734215] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  621.734605] sd 4:0:0:1: [sde] Write Protect is off
[  621.734607] sd 4:0:0:1: [sde] Mode Sense: 67 00 10 08
[  621.735591] sd 4:0:0:0: [sdd] Optimal transfer size 33553920 bytes
[  621.735962] sd 4:0:0:1: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  621.736714] sd 4:0:0:1: [sde] Optimal transfer size 33553920 bytes
[  621.789989]  sde: sde1
[  621.791501]  sdd: sdd1
[  621.823593] sd 4:0:0:1: [sde] Attached SCSI disk
[  621.825478] sd 4:0:0:0: [sdd] Attached SCSI disk
[  622.429223] EXT4-fs (sde1): recovery complete
[  622.429855] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[  622.609520] EXT4-fs (sdd1): recovery complete
[  622.610161] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
root@LibraZiK2:/home/ludovic# 

Quel soulagement !!!!!

root@LibraZiK2:/home/ludovic# dmesg|tail
[  621.736714] sd 4:0:0:1: [sde] Optimal transfer size 33553920 bytes
[  621.789989]  sde: sde1
[  621.791501]  sdd: sdd1
[  621.823593] sd 4:0:0:1: [sde] Attached SCSI disk
[  621.825478] sd 4:0:0:0: [sdd] Attached SCSI disk
[  622.429223] EXT4-fs (sde1): recovery complete
[  622.429855] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[  622.609520] EXT4-fs (sdd1): recovery complete
[  622.610161] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 1194.321533] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
root@LibraZiK2:/home/ludovic# 

Dernière modification par Compte supprimé (Le 17/11/2019, à 10:33)

F50

Re : Topic des lève-tôt [partie 12]

Morning

Compte supprimé

Re : Topic des lève-tôt [partie 12]

PLUS UNE SEULE ERREUR USB ! putain de switch d'écran VGA-USB et de prises USB blanches (étamées à l'étain)

root@LibraZiK2:/home/ludovic# dmesg|tail
[  621.791501]  sdd: sdd1
[  621.823593] sd 4:0:0:1: [sde] Attached SCSI disk
[  621.825478] sd 4:0:0:0: [sdd] Attached SCSI disk
[  622.429223] EXT4-fs (sde1): recovery complete
[  622.429855] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[  622.609520] EXT4-fs (sdd1): recovery complete
[  622.610161] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 1194.321533] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 1588.464715] perf: interrupt took too long (3130 > 3127), lowering kernel.perf_event_max_sample_rate to 63750
[ 1936.504546] NOHZ: local_softirq_pending 40
root@LibraZiK2:/home/ludovic# 

Voilà c'est résolu pour la journée !

Dernière modification par Compte supprimé (Le 17/11/2019, à 11:13)

F50

Re : Topic des lève-tôt [partie 12]

Voilà c'est résolu pour la journée !

Tant mieux ! Maintenant nous attendons avec "impatience" le prochain problème...

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Voilà c'est résolu pour la journée !

Tant mieux ! Maintenant nous attendons avec "impatience" le prochain problème...

lol !

problème en cour : ma jambe ne repousse pas…

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Sérieusement ? Personne ici n'a jamais eu de problème de connecteur ?

C'EST VRAI CE MENSONGE ?

F50

Re : Topic des lève-tôt [partie 12]

Non, mais faut dire que je n'achète pas non plus des câbles usb au bazar le plus proche.

rogn...

Re : Topic des lève-tôt [partie 12]

Sérieusement ? Personne ici n'a jamais eu de problème de connecteur ?

C'EST VRAI CE MENSONGE ?

Si

Henry de Monfreid

Re : Topic des lève-tôt [partie 12]

Mon ordinateur sous LibraZiK fonctionne bien et devient plus résiliant avec la limite de taille des journaux réservés aux informaticiens et aux administrateurs de l'ordinateur.

Euh… Tu ne l'aurais pas déjà dit ?

---

« Je te hais plus qu'aucun des dieux qui vivent sur l'Olympe
Car tu ne rêves que discordes, guerres et combats. »
Trouble obsessionnelcompulsif
Le TdCT est revenu (ils reviennent tous)

Henry de Monfreid

Re : Topic des lève-tôt [partie 12]

(étamées à l'étain)

Tu es certain que ce n'est pas plombé au plomb ou doré à l'or ?

Je retourne manger ma tartine de pain aillé à l'ail et beurré au beurre. (du pain moulé au moule)

---

« Je te hais plus qu'aucun des dieux qui vivent sur l'Olympe
Car tu ne rêves que discordes, guerres et combats. »
Trouble obsessionnelcompulsif
Le TdCT est revenu (ils reviennent tous)

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Non, mais faut dire que je n'achète pas non plus des câbles usb au bazar le plus proche.

image du KVM à connexions électroniques en question

Tant que tu ne me reproches pas d’être pauvre

Compte supprimé

Re : Topic des lève-tôt [partie 12]

(étamées à l'étain)

Tu es certain que ce n'est pas plombé au plomb ou doré à l'or ?

Je retourne manger ma tartine de pain aillé à l'ail et beurré au beurre. (du pain moulé au moule)

Je précise bien que c'est étamé à l'étain pour ne pas qu'on me demande le métal …

ÉTAMER, verbe trans.
…
P. anal. Recouvrir d'une couche de métal autre que l'étain. On étame au fer la surface extérieure de la bague de roulement (AMBROISE, Monteur mécan., 1949, p. 36).

F50

Re : Topic des lève-tôt [partie 12]

Tant que tu ne me reproches pas d’être pauvre

Rien avoir justement, quand on a pas le sou vaut mieux mettre quelques € de plus au départ que de racheter 3 fois le même câble qui à la fin sera plus cher.

Je doute fort que ton câble soit étamé (étain)... Chromé, argenté, doré oui mais pas étamé.

moko138

Re : Topic des lève-tôt [partie 12]

(étamées à l'étain)

Tu es certain que ce n'est pas plombé au plomb ou doré à l'or ?

Je retourne manger ma tartine de pain aillé à l'ail et beurré au beurre. (du pain moulé au moule)

Tous les vendredis soirs et samedis soirs, je peux voir des gens beurrés à la bière ou à la vodka.

---

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Rien avoir justement, quand on a pas le sou vaut mieux mettre quelques € de plus au départ que de racheter 3 fois le même câble qui à la fin sera plus cher.

Je connais déjà le dicton «acheter bon-marché, c'est acheter cher».

Je doute fort que ton câble soit étamé (étain)... Chromé, argenté, doré oui mais pas étamé.

Mon oncle Roger m'a dit étain.

Je n'ai pas testé chimiquement le métal mais visuellement ça pourrait être de l'étain, ou du chrome, ou de l'argent, ou du nickel. Quel est le moins cher que les fabricants utilisent ?

Ce n'est ni du plomb, ni de l'aluminium, ni du fer. (pas d'oxyde de plomb, ni d'oxyde d'aluminium, ni d'oxyde de fer).

Je ne pense pas que ce soit de l'or blanc.

Dernière modification par Compte supprimé (Le 17/11/2019, à 12:25)

Compte supprimé

Re : Topic des lève-tôt [partie 12]

(étamées à l'étain)

Tu es certain que ce n'est pas plombé au plomb ou doré à l'or ?

Je retourne manger ma tartine de pain aillé à l'ail et beurré au beurre. (du pain moulé au moule)

Tous les vendredis soirs et samedis soirs, je peux voir des gens beurrés à la bière ou à la vodka.

Et quand ils vont se faire dorer au soleil le dimanche, c'est sans un gramme d'or.

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Moko138, jeange et F50,
je règle tous mes écrans couleurs à l'œil avec le même genre d'image.

moko138

Re : Topic des lève-tôt [partie 12]

Merci Ludovic ! 

---

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

F50

Re : Topic des lève-tôt [partie 12]

Je n'ai pas testé chimiquement le métal mais visuellement ça pourrait être de l'étain, ou du chrome, ou de l'argent, ou du nickel. Quel est le moins cher que les fabricants utilisent ?

Le chrome, pas cher et esthétique.

L'étain n'a jamais été utilisé pour des contacts, la majeure partie des étains contiennent du plomb 40/60 50/50 et l'étain utilisé pour ce qui est appelé le fer blanc jadis utilisé pour les ustensils de cuisine n'existe plus, remplacé par l'inox (alliage chrome nickel acier ) 18/10 en cuisine 18/8 pour le reste.

L'argent, le meileur conducteur d'électricite sur la planète mais qui esthétiquement n'est pas terrible vu qu'il "s'oxyde" et deviens noir devant le cuivre (égal à l'argent si diamètre du conducteur augmenté de 10% et bien moins cher) , pas vendeur contrairement à cette mode du plaqué or qui brille mais est moins conducteur. Ah, le marketing qu'on appel cela...

Compte supprimé

Re : Topic des lève-tôt [partie 12]

Merci F50.

La prise aimante. Est-ce un indice ?
Est-ce la prise qui aimante ou le revêtement ?

Dernière modification par Compte supprimé (Le 17/11/2019, à 16:46)

F50

Re : Topic des lève-tôt [partie 12]

En principe les connexions le sont toutes (feraille chromée ou dorée ou autre traitement), y'a que le pure argent qui ne l'est pas. Ce n'est donc pas un indice du traitement superficiel pour ce qui est à base de feraille.

Edit :

Est-ce la prise qui aimante ou le revêtement ?

La prise. Ni l'or, l'argent ou le chrome le sont mais la feraille de la prise oui.

Dernière modification par F50 (Le 17/11/2019, à 17:09)

moko138

Re : Topic des lève-tôt [partie 12]

#8000 !

---

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw