Ubuntu-fr

Nico207

Canon MP980 - Impression impossible

Bonjour,

j'utilise une imprimante Canon MP980 en Wifi avec Ubuntu depuis de nombreuses années.
Depuis quelques jours, je ne peux plus lancer d'impression. À chaque fois, j'obtiens le message "Traitement en cours - Network host 'XXX.XXX.XXX.XXX' is out of paper, will retry in 30 seconds..."
Il ne se passe rien du côté de l'imprimante, comme si elle ne recevait aucune donnée.
J'ai deux PC, les deux fonctionnent avec Ubuntu 18.04, les deux sont à jour, mais un seul des deux à ce problème.
Le problème est uniquement sur l'imprimante, car le scanner fonctionne.
Pilotes installés : CUPS+Gutenprint v5.2.13

Ce que j'ai déjà tenté :

• ping de l'imprimante -> Oui, elle répond

• lpinfo -v  -> trouvée (network bjnp://192.168.1.25:8611)

• désinstaller/réinstaller l'imprimante -> Ne change rien

• désinstaller/réinstaller cups-backend-bjnp -> Ne change rien

• test de TurboPrint -> Ne change rien

Si quelqu'un à une piste, je suis preneur.

Merci.

Compte supprimé

Re : Canon MP980 - Impression impossible

Bonjour Nico207.

Le message «is out of paper» est curieux.
Es-tu certain que l'imprimante a du papier ?
Demandes-tu le bon bac d'impression ? (parfois il y a plusieurs sources possibles de papier).

Nico207

Re : Canon MP980 - Impression impossible

L'imprimante fonctionne parfaitement avec un autre ordi.
Le bac demandé est le bon. De plus, quand le bac n'est pas bon, l'imprimante elle-même affiche une erreur.
Là, elle ne réagit pas du tout, comme si elle n'avait absolument rien reçu...

sylvain3800

Re : Canon MP980 - Impression impossible

J'ai deux PC, les deux fonctionnent avec Ubuntu 18.04, les deux sont à jour, mais un seul des deux à ce problème.

donc ce n'est déjà pas un problème de pilote
l'imprimante est elle partagé?
lorsque tu vas sur le server cups .
http://localhost:631/printers/
clique sur ton imprimante et dis nous ce qui est écrit a droite du nom de ton imprimante entre parenthese .
ensuite depuis le pc problématique,
donne nous le retour de ces commandes :

groups

cat /var/log/cups/error_log

lpstat -t

dpkg -l | grep cups

dpkg -l | grep -v ^ii

sudo cat /etc/cups/printers.conf

sudo cat /etc/cups/cupsd.conf 

j’espère voir quelque chose qui cloche

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

Dans les "Paramètres  d'imprimante supplémentaires...", elle est indiquée comme étant partagée.

Serveur CUPS

Nom de la file : MP980
Description : Canon MP980 series 192.168.1.25
Emplacement : 
Marque et modèle : Canon MP980 series - CUPS+Gutenprint v5.2.13
État : En cours d'impression - "Network host '192.168.1.25' is out of paper, will retry in 30 seconds..."

Et les commandes :
groups

nico207 adm cdrom sudo dip plugdev lpadmin sambashare

cat /var/log/cups/error_log

cat /var/log/cups/error_log
I [01/Feb/2020:00:05:32 +0100] Saving subscriptions.conf...
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I [01/Feb/2020:00:05:32 +0100] Saving job.cache...
D [01/Feb/2020:00:05:32 +0100] cupsdStopSelect()
I [01/Feb/2020:00:05:32 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Feb/2020:00:05:32 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Feb/2020:00:05:32 +0100] Listening to /run/cups/cups.sock (Domain)
E [01/Feb/2020:00:05:32 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:05:32 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:05:32 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:05:32 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
I [01/Feb/2020:00:05:32 +0100] Remote access is disabled.
D [01/Feb/2020:00:05:32 +0100] Added auto ServerAlias PC-NICO207
I [01/Feb/2020:00:05:32 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Feb/2020:00:05:32 +0100] Using keychain "/etc/cups/ssl" for server name "PC-NICO207".
I [01/Feb/2020:00:05:32 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Feb/2020:00:05:32 +0100] Configured for up to 100 clients.
I [01/Feb/2020:00:05:32 +0100] Allowing up to 100 client connections per host.
I [01/Feb/2020:00:05:32 +0100] Using policy "default" as the default.
I [01/Feb/2020:00:05:32 +0100] Full reload is required.
I [01/Feb/2020:00:05:32 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [01/Feb/2020:00:05:32 +0100] Loading printer MP980...
D [01/Feb/2020:00:05:32 +0100] load_ppd: Loading /var/cache/cups/MP980.data...
D [01/Feb/2020:00:05:32 +0100] cupsdRegisterPrinter(p=0x55999a7c0c80(MP980))
D [01/Feb/2020:00:05:32 +0100] load_ppd: Loading /var/cache/cups/MP980.data...
D [01/Feb/2020:00:05:32 +0100] cupsdRegisterPrinter(p=0x55999a7c0c80(MP980))
I [01/Feb/2020:00:05:32 +0100] Loading job cache file "/var/cache/cups/job.cache"...
D [01/Feb/2020:00:05:32 +0100] [Job 99] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 100] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 101] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 102] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 102] Loading attributes...
D [01/Feb/2020:00:05:32 +0100] [Job 102] Unloading...
D [01/Feb/2020:00:05:32 +0100] [Job 103] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 103] Loading attributes...
D [01/Feb/2020:00:05:32 +0100] [Job 103] Unloading...
D [01/Feb/2020:00:05:32 +0100] [Job 104] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 104] Loading attributes...
D [01/Feb/2020:00:05:32 +0100] [Job 104] Unloading...
D [01/Feb/2020:00:05:32 +0100] [Job 105] Loading from cache...
D [01/Feb/2020:00:05:32 +0100] [Job 105] Loading attributes...
D [01/Feb/2020:00:05:32 +0100] [Job 105] Unloading...
D [01/Feb/2020:00:05:32 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [01/Feb/2020:00:05:32 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [01/Feb/2020:00:05:32 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [01/Feb/2020:00:05:32 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
I [01/Feb/2020:00:05:32 +0100] Full reload complete.
D [01/Feb/2020:00:05:32 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Feb/2020:00:05:32 +0100] Cleaning out old files in "/var/spool/cups/tmp".
D [01/Feb/2020:00:05:32 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Feb/2020:00:05:32 +0100] Cleaning out old files in "/var/cache/cups".
D [01/Feb/2020:00:05:32 +0100] service_checkin: pid=9576
D [01/Feb/2020:00:05:32 +0100] service_checkin: 1 listeners.
D [01/Feb/2020:00:05:32 +0100] service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] service_add_listener: Matched existing listener #1 to /run/cups/cups.sock.
D [01/Feb/2020:00:05:32 +0100] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [01/Feb/2020:00:05:32 +0100] Calling FindDeviceById(cups-MP980)
D [01/Feb/2020:00:05:32 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-MP980\' does not exist
D [01/Feb/2020:00:05:32 +0100] Using profile ID "MP980-Gray..".
D [01/Feb/2020:00:05:32 +0100] Calling CreateProfile(MP980-Gray..,temp)
D [01/Feb/2020:00:05:32 +0100] Created profile "/org/freedesktop/ColorManager/profiles/MP980_Gray__".
D [01/Feb/2020:00:05:32 +0100] Using profile ID "MP980-RGB..".
D [01/Feb/2020:00:05:32 +0100] Calling CreateProfile(MP980-RGB..,temp)
D [01/Feb/2020:00:05:32 +0100] Created profile "/org/freedesktop/ColorManager/profiles/MP980_RGB__".
I [01/Feb/2020:00:05:32 +0100] Registering ICC color profiles for "MP980".
D [01/Feb/2020:00:05:32 +0100] Calling CreateDevice(cups-MP980,temp)
D [01/Feb/2020:00:05:32 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_MP980".
D [01/Feb/2020:00:05:32 +0100] Calling /org/freedesktop/ColorManager/devices/cups_MP980:AddProfile(/org/freedesktop/ColorManager/profiles/MP980_Gray__) [soft]
D [01/Feb/2020:00:05:32 +0100] Calling /org/freedesktop/ColorManager/devices/cups_MP980:AddProfile(/org/freedesktop/ColorManager/profiles/MP980_RGB__) [soft]
I [01/Feb/2020:00:05:32 +0100] Listening to [v1.::1]:631 on fd 7...
I [01/Feb/2020:00:05:32 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Feb/2020:00:05:32 +0100] Listening to /run/cups/cups.sock on fd 3...
I [01/Feb/2020:00:05:32 +0100] Resuming new connection processing...
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:05:32 +0100] cupsdAddCert: Adding certificate for PID 0
D [01/Feb/2020:00:05:32 +0100] Notifier dbus started - PID = 9592
D [01/Feb/2020:00:05:32 +0100] cupsdMarkDirty(----S)
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 1] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 1] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] Report: clients=1
D [01/Feb/2020:00:05:32 +0100] Report: jobs=7
D [01/Feb/2020:00:05:32 +0100] Report: jobs-active=0
D [01/Feb/2020:00:05:32 +0100] Report: printers=1
D [01/Feb/2020:00:05:32 +0100] Report: stringpool-string-count=142672
D [01/Feb/2020:00:05:32 +0100] Report: stringpool-alloc-bytes=18800
D [01/Feb/2020:00:05:32 +0100] Report: stringpool-total-bytes=2648224
D [01/Feb/2020:00:05:32 +0100] [Client 1] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 1] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 1] 2.0 Create-Printer-Subscriptions 1
D [01/Feb/2020:00:05:32 +0100] Create-Printer-Subscriptions /
D [01/Feb/2020:00:05:32 +0100] create_subscriptions(con=0x55999b1df0d0(1), uri="/")
D [01/Feb/2020:00:05:32 +0100] pullmethod="ippget"
D [01/Feb/2020:00:05:32 +0100] notify-lease-duration=86400
D [01/Feb/2020:00:05:32 +0100] notify-time-interval=60
D [01/Feb/2020:00:05:32 +0100] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [01/Feb/2020:00:05:32 +0100] Added subscription #1604 for server.
D [01/Feb/2020:00:05:32 +0100] cupsdMarkDirty(----S)
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 1] Content-Length: 107
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] con->http=0x55999b1d9360
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55999b17a6e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] bytes=0, http_state=0, data_remaining=107
D [01/Feb/2020:00:05:32 +0100] [Client 1] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 1] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 2] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 2] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 2] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 2] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 2] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 2] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 2] 2.0 CUPS-Get-Printers 2
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Printers
D [01/Feb/2020:00:05:32 +0100] [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 2] Content-Length: 1778
D [01/Feb/2020:00:05:32 +0100] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 2] con->http=0x55999b214730
D [01/Feb/2020:00:05:32 +0100] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1778, response=0x55999a7abe30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 2] bytes=0, http_state=0, data_remaining=1778
D [01/Feb/2020:00:05:32 +0100] [Client 2] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 2] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 2] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 2] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 2] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 2] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 2] 2.0 CUPS-Get-Default 3
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:32 +0100] [Client 2] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 2] Content-Length: 22691
D [01/Feb/2020:00:05:32 +0100] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 2] con->http=0x55999b214730
D [01/Feb/2020:00:05:32 +0100] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999b16aa70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 2] Writing IPP response, ipp_state=IPP_STATE_ATTRIBUTE, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 2] bytes=1, http_state=7, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 2] con->http=0x55999b214730
D [01/Feb/2020:00:05:32 +0100] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999b16aa70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 2] bytes=0, http_state=0, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 2] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 2] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 2] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Notifier] state=3
D [01/Feb/2020:00:05:32 +0100] [Notifier] Connected to D-BUS
D [01/Feb/2020:00:05:32 +0100] [Notifier] ServerStarted
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 3] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 3] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 3] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 3] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 3] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 3] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 3] 2.0 Get-Notifications 964
D [01/Feb/2020:00:05:32 +0100] Get-Notifications /printers/
D [01/Feb/2020:00:05:32 +0100] cupsdIsAuthorized: requesting-user-name="nico207"
D [01/Feb/2020:00:05:32 +0100] [Client 3] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 3] Content-Length: 127
D [01/Feb/2020:00:05:32 +0100] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 3] con->http=0x55999b21cd50
D [01/Feb/2020:00:05:32 +0100] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x55999a843fd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 3] bytes=0, http_state=0, data_remaining=127
D [01/Feb/2020:00:05:32 +0100] [Client 3] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 3] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 3] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 1] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 1] 2.0 CUPS-Get-Default 4
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:32 +0100] [Client 1] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 1] Content-Length: 22691
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] con->http=0x55999b1d9360
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999a7abce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 1] Writing IPP response, ipp_state=IPP_STATE_ATTRIBUTE, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] bytes=1, http_state=7, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 1] con->http=0x55999b1d9360
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999a7abce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] bytes=0, http_state=0, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 1] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 1] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 4] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 4] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 4] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 4] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 4] 2.0 CUPS-Get-Printers 1
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Printers
D [01/Feb/2020:00:05:32 +0100] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 4] Content-Length: 1778
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1778, response=0x55999b1dc5b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] bytes=0, http_state=0, data_remaining=1778
D [01/Feb/2020:00:05:32 +0100] [Client 4] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 4] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 4] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 4] 2.0 CUPS-Get-Default 2
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:32 +0100] [Client 4] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 4] Content-Length: 22691
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999a7abce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_ATTRIBUTE, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] bytes=1, http_state=7, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 4] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999a7abce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] bytes=0, http_state=0, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 4] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 4] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 1] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 1] 2.0 Create-Printer-Subscriptions 5
D [01/Feb/2020:00:05:32 +0100] Create-Printer-Subscriptions /
D [01/Feb/2020:00:05:32 +0100] create_subscriptions(con=0x55999b1df0d0(1), uri="/")
D [01/Feb/2020:00:05:32 +0100] recipient="dbus://"
D [01/Feb/2020:00:05:32 +0100] notify-lease-duration=86400
D [01/Feb/2020:00:05:32 +0100] notify-time-interval=0
D [01/Feb/2020:00:05:32 +0100] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [01/Feb/2020:00:05:32 +0100] Added subscription #1605 for server.
D [01/Feb/2020:00:05:32 +0100] cupsdMarkDirty(----S)
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 1] Content-Length: 107
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] con->http=0x55999b1d9360
D [01/Feb/2020:00:05:32 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55999b21c610(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 1] bytes=0, http_state=0, data_remaining=107
D [01/Feb/2020:00:05:32 +0100] [Client 1] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 1] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 4] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 4] 2.0 CUPS-Get-Default 3
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:32 +0100] [Client 4] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 4] Content-Length: 22691
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999a7abce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_ATTRIBUTE, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] bytes=1, http_state=7, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 4] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999a7abce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] bytes=0, http_state=0, data_remaining=22691
D [01/Feb/2020:00:05:32 +0100] [Client 4] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 4] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 4] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 4] 2.0 CUPS-Get-Printers 4
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Printers
D [01/Feb/2020:00:05:32 +0100] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 4] Content-Length: 189
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=189, response=0x55999b17b030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 4] bytes=0, http_state=0, data_remaining=189
D [01/Feb/2020:00:05:32 +0100] [Client 4] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 4] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:32 +0100] [Client 4] Closing connection.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 5] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 5] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 5] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 5] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 5] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 5] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 5] 2.0 CUPS-Get-Default 1
D [01/Feb/2020:00:05:32 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:32 +0100] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 5] Content-Length: 1778
D [01/Feb/2020:00:05:32 +0100] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 5] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1778, response=0x55999b1dc570(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 5] bytes=0, http_state=0, data_remaining=1778
D [01/Feb/2020:00:05:32 +0100] [Client 5] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 5] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 5] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:32 +0100] [Client 5] Closing connection.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 6] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 6] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 6] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 6] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 6] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 6] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 6] 2.0 Get-Jobs 1
D [01/Feb/2020:00:05:32 +0100] Get-Jobs ipp://localhost/
D [01/Feb/2020:00:05:32 +0100] [Client 6] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 6] Content-Length: 75
D [01/Feb/2020:00:05:32 +0100] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 6] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55999b1c8240(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 6] bytes=0, http_state=0, data_remaining=75
D [01/Feb/2020:00:05:32 +0100] [Client 6] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 6] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 6] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:32 +0100] [Client 6] Closing connection.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 7] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 7] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 7] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 7] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 7] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 7] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 7] 2.0 Get-Jobs 1
D [01/Feb/2020:00:05:32 +0100] Get-Jobs ipp://localhost/
D [01/Feb/2020:00:05:32 +0100] [Client 7] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 7] Content-Length: 75
D [01/Feb/2020:00:05:32 +0100] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 7] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55999a7abe50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 7] bytes=0, http_state=0, data_remaining=75
D [01/Feb/2020:00:05:32 +0100] [Client 7] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 7] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:32 +0100] [Client 7] Closing connection.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 8] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:32 +0100] [Client 8] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:32 +0100] [Client 8] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] [Client 8] POST / HTTP/1.1
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 8] Read: status=200, state=6
D [01/Feb/2020:00:05:32 +0100] [Client 8] No authentication data provided.
D [01/Feb/2020:00:05:32 +0100] [Client 8] 2.0 Get-Jobs 1
D [01/Feb/2020:00:05:32 +0100] Get-Jobs ipp://localhost/
D [01/Feb/2020:00:05:32 +0100] [Client 8] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [01/Feb/2020:00:05:32 +0100] [Client 8] Content-Length: 75
D [01/Feb/2020:00:05:32 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:32 +0100] [Client 8] con->http=0x55999b1be090
D [01/Feb/2020:00:05:32 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55999b17a6e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:32 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:32 +0100] [Client 8] bytes=0, http_state=0, data_remaining=75
D [01/Feb/2020:00:05:32 +0100] [Client 8] Flushing write buffer.
D [01/Feb/2020:00:05:32 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:32 +0100] [Client 8] Waiting for request.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:32 +0100] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:32 +0100] [Client 8] Closing connection.
D [01/Feb/2020:00:05:32 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [01/Feb/2020:00:05:33 +0100] Expiring subscriptions...
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:36 +0100] [Client 9] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:36 +0100] [Client 9] Waiting for request.
I [01/Feb/2020:00:05:36 +0100] Expiring subscriptions...
D [01/Feb/2020:00:05:36 +0100] [Client 9] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 9] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 9] 2.0 CUPS-Get-Printers 1
D [01/Feb/2020:00:05:36 +0100] CUPS-Get-Printers
D [01/Feb/2020:00:05:36 +0100] [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 9] Content-Length: 1778
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1778, response=0x55999b1dc5b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] bytes=0, http_state=0, data_remaining=1778
D [01/Feb/2020:00:05:36 +0100] [Client 9] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 9] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 9] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 9] 2.0 CUPS-Get-Default 2
D [01/Feb/2020:00:05:36 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:36 +0100] [Client 9] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 9] Content-Length: 22691
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999b221e30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_ATTRIBUTE, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] bytes=1, http_state=7, data_remaining=22691
D [01/Feb/2020:00:05:36 +0100] [Client 9] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999b221e30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] bytes=0, http_state=0, data_remaining=22691
D [01/Feb/2020:00:05:36 +0100] [Client 9] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 9] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 9] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 9] 2.0 CUPS-Get-Default 3
D [01/Feb/2020:00:05:36 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:36 +0100] [Client 9] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 9] Content-Length: 22691
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999b1cf540(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_ATTRIBUTE, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] bytes=1, http_state=7, data_remaining=22691
D [01/Feb/2020:00:05:36 +0100] [Client 9] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=22691, response=0x55999b1cf540(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] bytes=0, http_state=0, data_remaining=22691
D [01/Feb/2020:00:05:36 +0100] [Client 9] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 9] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 9] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 9] 2.0 CUPS-Get-Printers 4
D [01/Feb/2020:00:05:36 +0100] CUPS-Get-Printers
D [01/Feb/2020:00:05:36 +0100] [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 9] Content-Length: 189
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=189, response=0x55999b179040(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 9] bytes=0, http_state=0, data_remaining=189
D [01/Feb/2020:00:05:36 +0100] [Client 9] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 9] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:36 +0100] [Client 9] Closing connection.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 10] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:36 +0100] [Client 10] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:36 +0100] [Client 10] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] [Client 10] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 10] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 10] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 10] 2.0 CUPS-Get-Default 1
D [01/Feb/2020:00:05:36 +0100] CUPS-Get-Default
D [01/Feb/2020:00:05:36 +0100] [Client 10] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 10] Content-Length: 1778
D [01/Feb/2020:00:05:36 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 10] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1778, response=0x55999b1dc5b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 10] bytes=0, http_state=0, data_remaining=1778
D [01/Feb/2020:00:05:36 +0100] [Client 10] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 10] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:36 +0100] [Client 10] Closing connection.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 11] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:36 +0100] [Client 11] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:36 +0100] [Client 11] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] [Client 11] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 11] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 11] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 11] 2.0 Get-Jobs 1
D [01/Feb/2020:00:05:36 +0100] Get-Jobs ipp://localhost/
D [01/Feb/2020:00:05:36 +0100] [Client 11] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 11] Content-Length: 75
D [01/Feb/2020:00:05:36 +0100] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 11] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55999b179db0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 11] bytes=0, http_state=0, data_remaining=75
D [01/Feb/2020:00:05:36 +0100] [Client 11] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 11] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 11] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 11] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:36 +0100] [Client 11] Closing connection.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 12] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:36 +0100] [Client 12] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:36 +0100] [Client 12] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] [Client 12] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 12] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 12] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 12] 2.0 Get-Jobs 1
D [01/Feb/2020:00:05:36 +0100] Get-Jobs ipp://localhost/
D [01/Feb/2020:00:05:36 +0100] [Client 12] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 12] Content-Length: 75
D [01/Feb/2020:00:05:36 +0100] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 12] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55999a7abe50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 12] bytes=0, http_state=0, data_remaining=75
D [01/Feb/2020:00:05:36 +0100] [Client 12] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 12] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 12] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 12] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:36 +0100] [Client 12] Closing connection.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 13] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:05:36 +0100] [Client 13] Accepted from localhost (Domain)
D [01/Feb/2020:00:05:36 +0100] [Client 13] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] [Client 13] POST / HTTP/1.1
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 13] Read: status=200, state=6
D [01/Feb/2020:00:05:36 +0100] [Client 13] No authentication data provided.
D [01/Feb/2020:00:05:36 +0100] [Client 13] 2.0 Get-Jobs 1
D [01/Feb/2020:00:05:36 +0100] Get-Jobs ipp://localhost/
D [01/Feb/2020:00:05:36 +0100] [Client 13] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [01/Feb/2020:00:05:36 +0100] [Client 13] Content-Length: 75
D [01/Feb/2020:00:05:36 +0100] [Client 13] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [01/Feb/2020:00:05:36 +0100] [Client 13] con->http=0x55999b1be090
D [01/Feb/2020:00:05:36 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55999b1c3b40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [01/Feb/2020:00:05:36 +0100] [Client 13] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [01/Feb/2020:00:05:36 +0100] [Client 13] bytes=0, http_state=0, data_remaining=75
D [01/Feb/2020:00:05:36 +0100] [Client 13] Flushing write buffer.
D [01/Feb/2020:00:05:36 +0100] [Client 13] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:05:36 +0100] [Client 13] Waiting for request.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Feb/2020:00:05:36 +0100] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:05:36 +0100] [Client 13] Closing connection.
D [01/Feb/2020:00:05:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [01/Feb/2020:00:05:37 +0100] Expiring subscriptions...
I [01/Feb/2020:00:06:03 +0100] Saving subscriptions.conf...
D [01/Feb/2020:00:06:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [01/Feb/2020:00:06:03 +0100] Expiring subscriptions...
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 14] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:10:19 +0100] [Client 14] Accepted from localhost (Domain)
D [01/Feb/2020:00:10:19 +0100] [Client 14] Waiting for request.
I [01/Feb/2020:00:10:19 +0100] Expiring subscriptions...
D [01/Feb/2020:00:10:19 +0100] Report: clients=4
D [01/Feb/2020:00:10:19 +0100] Report: jobs=7
D [01/Feb/2020:00:10:19 +0100] Report: jobs-active=0
D [01/Feb/2020:00:10:19 +0100] Report: printers=1
D [01/Feb/2020:00:10:19 +0100] Report: stringpool-string-count=142678
D [01/Feb/2020:00:10:19 +0100] Report: stringpool-alloc-bytes=18864
D [01/Feb/2020:00:10:19 +0100] Report: stringpool-total-bytes=2648368
D [01/Feb/2020:00:10:19 +0100] [Client 14] GET /admin/conf/cupsd.conf HTTP/1.1
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] [Client 14] Read: status=200, state=3
D [01/Feb/2020:00:10:19 +0100] [Client 14] No authentication data provided.
D [01/Feb/2020:00:10:19 +0100] cupsdIsAuthorized: username=""
D [01/Feb/2020:00:10:19 +0100] [Client 14] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [01/Feb/2020:00:10:19 +0100] [Client 14] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [01/Feb/2020:00:10:19 +0100] [Client 14] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 15] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:10:19 +0100] [Client 15] Accepted from localhost (Domain)
D [01/Feb/2020:00:10:19 +0100] [Client 15] Waiting for request.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] [Client 16] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:10:19 +0100] [Client 16] Accepted from localhost (Domain)
D [01/Feb/2020:00:10:19 +0100] [Client 16] Waiting for request.
D [01/Feb/2020:00:10:19 +0100] [Client 15] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:10:19 +0100] [Client 15] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Server address is "/run/cups/cups.sock".
D [01/Feb/2020:00:10:19 +0100] [Client 17] Accepted from localhost (Domain)
D [01/Feb/2020:00:10:19 +0100] [Client 17] Waiting for request.
D [01/Feb/2020:00:10:19 +0100] [Client 16] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [01/Feb/2020:00:10:19 +0100] [Client 16] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] [Client 17] GET /admin/conf/cupsd.conf HTTP/1.1
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Read: status=200, state=3
D [01/Feb/2020:00:10:19 +0100] [Client 17] Authorized as nico207 using PeerCred.
D [01/Feb/2020:00:10:19 +0100] cupsdIsAuthorized: username="nico207"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Processing GET /admin/conf/cupsd.conf
D [01/Feb/2020:00:10:19 +0100] [Client 17] filename="/etc/cups/cupsd.conf", type=text/plain
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [01/Feb/2020:00:10:19 +0100] [Client 17] Sending file.
D [01/Feb/2020:00:10:19 +0100] [Client 17] con->http=0x55999b1be090
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4689, response=(nil)(), pipe_pid=0, file=19
D [01/Feb/2020:00:10:19 +0100] [Client 17] con->http=0x55999b1be090
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4689, response=(nil)(), pipe_pid=0, file=19
D [01/Feb/2020:00:10:19 +0100] [Client 17] con->http=0x55999b1be090
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4689, response=(nil)(), pipe_pid=0, file=19
D [01/Feb/2020:00:10:19 +0100] [Client 17] Flushing write buffer.
D [01/Feb/2020:00:10:19 +0100] [Client 17] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:10:19 +0100] [Client 17] Waiting for request.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] [Client 17] GET /admin/conf/cupsd.conf HTTP/1.1
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Read: status=200, state=3
D [01/Feb/2020:00:10:19 +0100] [Client 17] Authorized as nico207 using PeerCred.
D [01/Feb/2020:00:10:19 +0100] cupsdIsAuthorized: username="nico207"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Processing GET /admin/conf/cupsd.conf
D [01/Feb/2020:00:10:19 +0100] [Client 17] filename="/etc/cups/cupsd.conf", type=text/plain
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [01/Feb/2020:00:10:19 +0100] [Client 17] Sending file.
D [01/Feb/2020:00:10:19 +0100] [Client 17] con->http=0x55999b1be090
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4689, response=(nil)(), pipe_pid=0, file=19
D [01/Feb/2020:00:10:19 +0100] [Client 17] con->http=0x55999b1be090
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4689, response=(nil)(), pipe_pid=0, file=19
D [01/Feb/2020:00:10:19 +0100] [Client 17] con->http=0x55999b1be090
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4689, response=(nil)(), pipe_pid=0, file=19
D [01/Feb/2020:00:10:19 +0100] [Client 17] Flushing write buffer.
D [01/Feb/2020:00:10:19 +0100] [Client 17] New state is HTTP_STATE_WAITING
D [01/Feb/2020:00:10:19 +0100] [Client 17] Waiting for request.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] [Client 17] PUT /admin/conf/cupsd.conf HTTP/1.1
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Read: status=200, state=9
D [01/Feb/2020:00:10:19 +0100] [Client 17] Authorized as nico207 using PeerCred.
D [01/Feb/2020:00:10:19 +0100] cupsdIsAuthorized: username="nico207"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Read: status=100, state=9
I [01/Feb/2020:00:10:19 +0100] [Client 17] Installing config file "/etc/cups/cupsd.conf"...
D [01/Feb/2020:00:10:19 +0100] [Client 17] cupsdSendHeader: code=201, type="(null)", auth_type=0
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Feb/2020:00:10:19 +0100] [Client 1] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 2] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 3] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Feb/2020:00:10:19 +0100] [Client 17] Closing connection.
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
E [01/Feb/2020:00:10:19 +0100] Scheduler shutting down due to program error.
D [01/Feb/2020:00:10:19 +0100] Notifier dbus started - PID = 9810
D [01/Feb/2020:00:10:19 +0100] cupsdMarkDirty(----S)
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Feb/2020:00:10:19 +0100] Saving subscriptions.conf...
D [01/Feb/2020:00:10:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Feb/2020:00:10:19 +0100] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I [01/Feb/2020:00:10:19 +0100] Saving job.cache...
D [01/Feb/2020:00:10:19 +0100] cupsdStopSelect()
E [01/Feb/2020:00:10:36 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:10:36 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:10:36 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:10:36 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
E [01/Feb/2020:00:29:02 +0100] [cups-deviced] PID 12533 (gutenprint52+usb) stopped with status 1!
W [01/Feb/2020:00:29:57 +0100] [Job 106] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
*** Se répète 7 fois***
W [01/Feb/2020:00:33:57 +0100] [Job 106] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
E [01/Feb/2020:00:34:32 +0100] [cups-deviced] PID 13650 (gutenprint52+usb) stopped with status 1!
W [01/Feb/2020:00:34:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-Gray..\' already exists
W [01/Feb/2020:00:34:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-RGB..\' already exists
W [01/Feb/2020:00:35:07 +0100] [Job 108] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
*** Se répète 9 fois***
W [01/Feb/2020:00:44:37 +0100] [Job 109] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
E [01/Feb/2020:00:46:54 +0100] [cups-deviced] PID 14407 (gutenprint52+usb) stopped with status 1!
E [01/Feb/2020:01:01:35 +0100] [cups-deviced] PID 15218 (gutenprint52+usb) stopped with status 1!
E [01/Feb/2020:01:02:10 +0100] [cups-deviced] PID 15358 (gutenprint52+usb) stopped with status 1!
E [01/Feb/2020:01:02:39 +0100] [cups-deviced] PID 15522 (gutenprint52+usb) stopped with status 1!
W [01/Feb/2020:01:02:45 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-Gray..\' already exists
W [01/Feb/2020:01:02:45 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-RGB..\' already exists
E [01/Feb/2020:01:03:19 +0100] [cups-deviced] PID 15578 (gutenprint52+usb) stopped with status 1!
W [01/Feb/2020:01:03:29 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-Gray..\' already exists
W [01/Feb/2020:01:03:29 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-RGB..\' already exists
W [01/Feb/2020:01:04:10 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
*** Se répète 20 fois***
W [01/Feb/2020:01:14:40 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
E [01/Feb/2020:11:44:51 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [01/Feb/2020:11:44:51 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [01/Feb/2020:11:44:51 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [01/Feb/2020:11:44:51 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
E [01/Feb/2020:11:44:51 +0100] [Job 106] Unable to queue job for destination "MP980-TurboPrint".
C [01/Feb/2020:11:44:51 +0100] [Job 110] bjnp_process_udp_command: connect - Network is unreachable
C [01/Feb/2020:11:44:51 +0100] [Job 110] bjnp_process_udp_command: connect - Network is unreachable
C [01/Feb/2020:11:44:51 +0100] [Job 110] bjnp_process_udp_command: connect - Network is unreachable
E [01/Feb/2020:11:44:51 +0100] [Job 110] Cannot retrieve status, no level information!
C [01/Feb/2020:11:44:51 +0100] [Job 110] Failed to establish TCP connection to printer 192.168.1.25 port 8611
C [01/Feb/2020:11:44:51 +0100] [Job 110] bjnp_process_udp_command: connect - Network is unreachable
C [01/Feb/2020:11:44:51 +0100] [Job 110] Received -1 characters in close response, expected 16
E [01/Feb/2020:11:44:51 +0100] [Job 110] Unable to connect to printer; will retry in 30 seconds...
W [01/Feb/2020:11:45:21 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:11:45:51 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:11:46:21 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:11:46:51 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:11:47:21 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:11:47:51 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
*** Se répète 230 fois***
W [01/Feb/2020:13:44:55 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:13:45:25 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:13:45:55 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [01/Feb/2020:13:46:25 +0100] [Job 110] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...

lpstat -t

scheduler is running
system default destination: MP980
matériel pour MP980 : bjnp://192.168.1.25:8611
MP980 accepte des requêtes depuis sam. 01 févr. 2020 11:44:51 CET
printer MP980 now printing MP980-110.  enabled since sam. 01 févr. 2020 11:44:51 CET
	Network host '192.168.1.25' is out of paper, will retry in 30 seconds...
MP980-110               nico207           1024   sam. 01 févr. 2020 01:04:10 CET

dpkg -l | grep cups

ii  bluez-cups                                    5.48-0ubuntu3.2                                    amd64        Bluetooth printer driver for CUPS
ii  cups                                          2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-backend-bjnp                             2.0.1-1                                            amd64        printer backend for Canon BJNP protocol
ii  cups-browsed                                  1.20.2-0ubuntu3.1                                  amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                      2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                   2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                   2.2.7-1ubuntu2.7                                   all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                             2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                   2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                                  1.20.2-0ubuntu3.1                                  amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                     1.20.2-0ubuntu3.1                                  amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                                2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                                0.2.6-1ubuntu1.2                                   amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                     2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                            2.2.7-1ubuntu2.7                                   all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                                2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - Core library
ii  libcupscgi1:amd64                             2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - CGI library
ii  libcupsfilters1:amd64                         1.20.2-0ubuntu3.1                                  amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                           2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - Raster image library
ii  libcupsmime1:amd64                            2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - MIME library
ii  libcupsppdc1:amd64                            2.2.7-1ubuntu2.7                                   amd64        Common UNIX Printing System(tm) - PPD manipulation library
ii  printer-driver-hpcups                         3.17.10+repack0-5                                  amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups                                  1.9.73-2                                           amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                           1.5.11-1ubuntu2                                    all          Python utility modules around the CUPS printing system

dpkg -l | grep -v ^ii

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                           Version                                            Architecture Description
+++-=============================================-==================================================-============-=====================================================================================
rc  libcompizconfig0:amd64                        1:0.9.13.1+18.04.20180302-0ubuntu1                 amd64        Settings library for plugins - OpenCompositing Project
rc  libgdk-pixbuf2.0-0:i386                       2.36.11-2                                          i386         GDK Pixbuf library
rc  libglib2.0-0:i386                             2.56.4-0ubuntu0.18.04.4                            i386         GLib library of C routines
rc  libgssapi-krb5-2:i386                         1.16-2ubuntu0.1                                    i386         MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
rc  libgtk-3-0:i386                               3.22.30-1ubuntu4                                   i386         GTK+ graphical user interface library
rc  libkf5itemmodels5:amd64                       5.44.0-0ubuntu1                                    amd64        additional item/view models for Qt Itemview
rc  libktoblzcheck1v5                             1.49-4                                             amd64        library for verification of account numbers and bank codes
rc  libogg0:i386                                  1.3.2-1                                            i386         Ogg bitstream library
rc  libpulse0:i386                                1:11.1-1ubuntu7.4                                  i386         PulseAudio client libraries
rc  libsane1:i386                                 1.0.27-1~experimental3ubuntu2.2                    i386         API library for scanners
rc  libsasl2-modules:i386                         2.1.27~101-g0780600+dfsg-3ubuntu2                  i386         Cyrus SASL - pluggable authentication modules
rc  libssl1.1:i386                                1.1.1-1ubuntu2.1~18.04.5                           i386         Secure Sockets Layer toolkit - shared libraries
rc  libwrap0:i386                                 7.6.q-27                                           i386         Wietse Venema's TCP wrappers library
rc  linux-image-4.18.0-15-generic                 4.18.0-15.16~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-16-generic                 4.18.0-16.17~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-17-generic                 4.18.0-17.18~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-18-generic                 4.18.0-18.19~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-20-generic                 4.18.0-20.21~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-21-generic                 4.18.0-21.22~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-22-generic                 4.18.0-22.23~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-24-generic                 4.18.0-24.25~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-4.18.0-25-generic                 4.18.0-25.26~18.04.1                               amd64        Signed kernel image generic
rc  linux-image-5.0.0-23-generic                  5.0.0-23.24~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-25-generic                  5.0.0-25.26~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-27-generic                  5.0.0-27.28~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-29-generic                  5.0.0-29.31~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-31-generic                  5.0.0-31.33~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-32-generic                  5.0.0-32.34~18.04.2                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-35-generic                  5.0.0-35.38~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-36-generic                  5.0.0-36.39~18.04.1                                amd64        Signed kernel image generic
rc  linux-image-5.0.0-37-generic                  5.0.0-37.40~18.04.1                                amd64        Signed kernel image generic
rc  linux-modules-4.18.0-15-generic               4.18.0-15.16~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-16-generic               4.18.0-16.17~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-17-generic               4.18.0-17.18~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-18-generic               4.18.0-18.19~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-20-generic               4.18.0-20.21~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-21-generic               4.18.0-21.22~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-22-generic               4.18.0-22.23~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-24-generic               4.18.0-24.25~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-4.18.0-25-generic               4.18.0-25.26~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-23-generic                5.0.0-23.24~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-25-generic                5.0.0-25.26~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-27-generic                5.0.0-27.28~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-29-generic                5.0.0-29.31~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-31-generic                5.0.0-31.33~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-32-generic                5.0.0-32.34~18.04.2                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-35-generic                5.0.0-35.38~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-36-generic                5.0.0-36.39~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-5.0.0-37-generic                5.0.0-37.40~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-15-generic         4.18.0-15.16~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-16-generic         4.18.0-16.17~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-17-generic         4.18.0-17.18~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-18-generic         4.18.0-18.19~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-20-generic         4.18.0-20.21~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-21-generic         4.18.0-21.22~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-22-generic         4.18.0-22.23~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-24-generic         4.18.0-24.25~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.18.0-25-generic         4.18.0-25.26~18.04.1                               amd64        Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-23-generic          5.0.0-23.24~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-25-generic          5.0.0-25.26~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-27-generic          5.0.0-27.28~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-29-generic          5.0.0-29.31~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-31-generic          5.0.0-31.33~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-32-generic          5.0.0-32.34~18.04.2                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-35-generic          5.0.0-35.38~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-36-generic          5.0.0-36.39~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.0.0-37-generic          5.0.0-37.40~18.04.1                                amd64        Linux kernel extra modules for version 5.0.0 on 64 bit x86 SMP
rc  ttf-mscorefonts-installer                     3.6ubuntu2                                         all          Installer for Microsoft TrueType core fonts
rc  turboprint                                    2.49-1                                             amd64        High-quality printer driver system for Linux
rc  xournal                                       1:0.4.8-1build1                                    amd64        GTK+ Application for note taking

sudo cat /etc/cups/printers.conf

# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<DefaultPrinter MP980>
UUID urn:uuid:aed56602-1835-3b87-73f7-82ada107e091
Info Canon MP980 series 192.168.1.25
Location 
MakeModel Canon MP980 series - CUPS+Gutenprint v5.2.13
DeviceURI bjnp://192.168.1.25:8611
State Idle
StateTime 1580562338
ConfigTime 1580562327
Reason bjnp.PhotoBlack-ink-empty-error
Reason bjnp.Black-ink-low-warning
Reason marker-supply-empty-error
Type 45084
Accepting Yes
Shared No
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
Attribute marker-colors \#FF00FF,#000000,#808080,#000000,#00FFFF,#FFFF00
Attribute marker-levels 40,0,0,10,40,40
Attribute marker-low-levels 10,10,10,10,10,10
Attribute marker-high-levels 100,100,100,100,100,100
Attribute marker-names Magenta,PhotoBlack,Gray,Black,Cyan,Yellow
Attribute marker-types ink,ink,ink,ink,ink,ink
Attribute marker-change-time 1580562698
</DefaultPrinter>

sudo cat /etc/cups/cupsd.conf

LogLevel warn
PageLogFormat
MaxLogSize 0
Listen localhost:631
Listen /run/cups/cups.sock
Browsing Off
BrowseLocalProtocols dnssd
DefaultAuthType Basic
WebInterface Yes
<Location />
  Order allow,deny
</Location>
<Location /admin>
  Order allow,deny
</Location>
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>
<Location /admin/log>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>
<Policy default>
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
<Policy authenticated>
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
<Policy kerberos>
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Negotiate
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default

Dernière modification par Nico207 (Le 01/02/2020, à 14:13)

sylvain3800

Re : Canon MP980 - Impression impossible

Ok merci pour les retours.
supprime le job de la file d'attente si ce n'est pas déjà fais

lprm

puis donne moi le retour de cette commande :

 dpkg -s cups-backend-bjnp

ensuite sur le pc qui va bien donne moi le retour de

sudo cat /etc/cups/printers.conf

j'aimerais comparer les 2  fichiers de conf

Ensuite as tu moyen de relier directement l'imprimante depuis ton pc défectueux avec un câble usb ?
l'impression fonctionne elle en usb ?

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

lprm
-> aucun retour

dpkg -s cups-backend-bjnp

Package: cups-backend-bjnp
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: cups-bjnp
Version: 2.0.1-1
Depends: libc6 (>= 2.15), libcups2 (>= 1.4.0)
Recommends: printer-driver-gutenprint
Description: printer backend for Canon BJNP protocol
 This package provides a back-end for CUPS printing system to interface
 with Canon printers using the proprietary USB over IP BJNP protocol. This
 back-end allows Cups to print over the network to a Canon printer and was
 designed by reverse engineering the protocol.
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Homepage: http://cups-bjnp.sourceforge.net/

Sur le PC sain :
sudo cat /etc/cups/printers.conf

# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<DefaultPrinter Canon-MP980-series>
UUID urn:uuid:62ea665b-6dd9-3e6b-7036-b0c8fed3ce14
Info Canon MP980 series
MakeModel Canon MP980 series - CUPS+Gutenprint v5.2.13
DeviceURI bjnp://192.168.1.25:8611
State Idle
StateTime 1579160926
ConfigTime 1558204753
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</DefaultPrinter>

Par contre, ça m'a permis de voir que cups-backend-bjnp n'est pas installé sur le PC qui va bien...

$ dpkg -s cups-backend-bjnp
dpkg-query: le paquet « cups-backend-bjnp » n'est pas installé et aucune information n'est disponible
Utilisez dpkg --info (= dpkg-deb --info) pour examiner les fichiers
archives, et dpkg --contents (= dpkg-deb --contents) pour afficher leur
contenu.

sylvain3800

Re : Canon MP980 - Impression impossible

ha ... le printer.conf est bien differends !
cela doit etre le cups-backen-bjnp qui doit poser probleme.
donc sur le pc qui va pas bien :

sudo dpkg -P cups-backend-bjnp

puis redemarage de cups

sudo /etc/init.d/cups restart

puis tente une impression
et si cela ne marche toujours pas redonne

sudo cat /etc/cups/printers.conf

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

sudo dpkg -P cups-backend-bjnp

(Lecture de la base de données... 278951 fichiers et répertoires déjà installés.)
Suppression de cups-backend-bjnp (2.0.1-1) ...

sudo /etc/init.d/cups restart

[ ok ] Restarting cups (via systemctl): cups.service.

Par contre l'impression n'a rien donnée.

CUPS me dit :

En pause - "Backend /usr/lib/cups/backend/bjnp does not exist!"

sudo cat /etc/cups/printers.conf

# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<DefaultPrinter MP980>
UUID urn:uuid:aed56602-1835-3b87-73f7-82ada107e091
Info Canon MP980 series 192.168.1.25
MakeModel Canon MP980 series - CUPS+Gutenprint v5.2.13
DeviceURI bjnp://192.168.1.25:8611
State Idle
StateTime 1580569975
ConfigTime 1580562327
Reason bjnp.PhotoBlack-ink-empty-error
Reason bjnp.Black-ink-low-warning
Reason marker-supply-empty-error
Type 45084
Accepting Yes
Shared No
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
Attribute marker-colors \#FF00FF,#000000,#808080,#000000,#00FFFF,#FFFF00
Attribute marker-levels 40,0,0,10,40,40
Attribute marker-low-levels 10,10,10,10,10,10
Attribute marker-high-levels 100,100,100,100,100,100
Attribute marker-names Magenta,PhotoBlack,Gray,Black,Cyan,Yellow
Attribute marker-types ink,ink,ink,ink,ink,ink
Attribute marker-change-time 1580569972
</DefaultPrinter>

sylvain3800

Re : Canon MP980 - Impression impossible

ok donc le dichierf printer.conf n'a pas ete modifié .
desinstalle puis reinstalle ton imprimante
si cela ne suffit pas
lance

 /etc/init.d/cups stop

puis

sudo gedit /etc/cups/printers.conf

une fenêtre s'ouvre avec ton fichier printers.conf
tu le remplace par celui ci :

# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<DefaultPrinter Canon-MP980-series>
UUID urn:uuid:62ea665b-6dd9-3e6b-7036-b0c8fed3ce14
Info Canon MP980 series
MakeModel Canon MP980 series - CUPS+Gutenprint v5.2.13
DeviceURI bjnp://192.168.1.25:8611
State Idle
StateTime 1579160926
ConfigTime 1558204753
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</DefaultPrinter>

tu enregistre et tu quitte
puis

/etc/init.d/cups start

puis tu retente une impression.

Dernière modification par sylvain3800 (Le 01/02/2020, à 17:26)

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

Après désinstallation, l'imprimante n'est plus détectée.

/etc/init.d/cups stop

[ ok ] Stopping cups (via systemctl): cups.service.

sudo gedit /etc/cups/printers.conf

Édition du fichier...

/etc/init.d/cups start

[ ok ] Starting cups (via systemctl): cups.service.

Après activation de l'imprimante : Lancement de l'impression d'un document, et...... rien!
Pas de changements, l'imprimante ne bronche pas d'un poil...

CUPS indique

Inoccupée - "File "/usr/lib/cups/backend/bjnp" not available: No such file or directory"

Et j'ai oublié d'indiquer : en USB elle fonctionne parfaitement

Dernière modification par Nico207 (Le 01/02/2020, à 17:53)

sylvain3800

Re : Canon MP980 - Impression impossible

...
lance cette commande .

sudo apt-get install cups --reinstall

puis redonne

cat /etc/cups/printers.conf

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

sudo apt-get install cups --reinstall

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 26 non mis à jour.
Il est nécessaire de prendre 191 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de :1 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 cups amd64 2.2.7-1ubuntu2.7 [191 kB]
191 ko réceptionnés en 0s (412 ko/s)
Préconfiguration des paquets...
(Lecture de la base de données... 278945 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../cups_2.2.7-1ubuntu2.7_amd64.deb ...
Dépaquetage de cups (2.2.7-1ubuntu2.7) sur (2.2.7-1ubuntu2.7) ...
Paramétrage de cups (2.2.7-1ubuntu2.7) ...
Updating PPD files for cups ...
Traitement des actions différées (« triggers ») pour man-db (2.8.3-2ubuntu0.1) ...

Entre-temps j'ai désinstallé l'imprimante (en USB et Réseau) du coup la config est vide.
L'ajout via l'interface n'est toujours pas possible, car elle n'est pas détectée.

// -----

Après avoir édité le fichier de config comme demandé plus haut, j'ai refait la réinstallation...

sudo apt-get install cups --reinstall

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances…
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 26 non mis à jour.
Il est nécessaire de prendre 0 o/191 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Préconfiguration des paquets...
(Lecture de la base de données... 278945 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../cups_2.2.7-1ubuntu2.7_amd64.deb ...
Dépaquetage de cups (2.2.7-1ubuntu2.7) sur (2.2.7-1ubuntu2.7) ...
Paramétrage de cups (2.2.7-1ubuntu2.7) ...
Updating PPD files for cups ...
Traitement des actions différées (« triggers ») pour man-db (2.8.3-2ubuntu0.1) ...

L'imprimante ne réagit toujours pas et CUPS me dit :

Inoccupée - "File "/usr/lib/cups/backend/bjnp" not available: No such file or directory"

J'ai l'impression que CUPS recherche le package bjnp qu'on a désinstallé...
Je suis en train de me demander : sur l'ordi qui fonctionne, si j'ai installé bjnp d'une autre façon (en le compilant à partir des sources par exemple), est-ce que la commande "dpkg -s cups-backend-bjnp" le trouverait ?

Mon temps pour ce soir est écoulé... je reprendrais les tests demain.
En tout cas, merci d'avoir pris le temps de m'aider aujourd'hui

sylvain3800

Re : Canon MP980 - Impression impossible

J'ai l'impression que CUPS recherche le package bjnp qu'on a désinstallé...

ben, normalement il est nécessaire pour scanner en réseau, mais comme tu l'avais pas sur ton autre ordi et que dans ta commande sudo cat /etc/cups/printers.conf sur l'ordi qui scanne pas
on retrouvait :

Reason bjnp.PhotoBlack-ink-empty-error
Reason bjnp.Black-ink-low-warning
Reason marker-supply-empty-error

et

Attribute marker-colors \#FF00FF,#000000,#808080,#000000,#00FFFF,#FFFF00
Attribute marker-levels 40,0,0,10,40,40
Attribute marker-low-levels 10,10,10,10,10,10
Attribute marker-high-levels 100,100,100,100,100,100
Attribute marker-names Magenta,PhotoBlack,Gray,Black,Cyan,Yellow
Attribute marker-types ink,ink,ink,ink,ink,ink
Attribute marker-change-time 1580569972

que l'on avait pas dans l'autre printers.conf ....
on voit que ce qui est en + nous montre que bjnp n'est pas content des niveau d'encre ... et donc je me suis dis que c'est cela qui bloquait l'impression, du coup je te les ai fait supprimer

Je suis en train de me demander : sur l'ordi qui fonctionne, si j'ai installé bjnp d'une autre façon (en le compilant à partir des sources par exemple), est-ce que la commande "dpkg -s cups-backend-bjnp" le trouverait ?

ben .... en fait , tu me pose une colle .... j'aurais pensé que oui ...... mais du coup lance

sudo find / -name bjnp

sur l'ordi sain pour voir si il le trouve .
si il est installé il devrait te donner :/usr/lib/cups/backend/bjnp comme réponse.si il ne te renvoit rien alors, c'
est qu'il n'est pas installé .
j'attends de savoir si il est vraiment "non-installé" sur l'ordi sain et si c'est le cas il va falloir comparer les paquets entre les 2 ordis .

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

Effectivement, il est bien présent.

find / -name bjnp

/usr/lib/cups/backend/bjnp

J'ai fouillé dans le bash_history, et j'ai retrouvé ça :

sudo apt-get install cups-backend-bjnp
sudo apt-get remove cups-backend-bjnp
sudo apt-get install cups-backend-bjnp
sudo apt-get purge cups-backend-bjnp
sudo dpkg -r turboprint
sudo apt-get purge cups-backend-bjnp

Petite précision, le scanner de l'imprimante fonctionne avec l'ordi qui pose problème...

ylag

Re : Canon MP980 - Impression impossible

Bonjour Nico207,

Pour voir quel paquet a installé le fichier:

dpkg -S /usr/lib/cups/backend/bjnp

A+

Nico207

Re : Canon MP980 - Impression impossible

Fait sur le PC qui fonctionne.
dpkg -S /usr/lib/cups/backend/bjnp

dpkg-query: aucun chemin ne correspond à /usr/lib/cups/backend/bjnp

ylag

Re : Canon MP980 - Impression impossible

Bonsoir Nico207,

Que donnerait:

dpkg -l cups-backend-bjnp

A+

Nico207

Re : Canon MP980 - Impression impossible

La même chose sur les 2 PC

dpkg -l cups-backend-bjnp

dpkg-query: aucun paquet ne correspond à cups-backend-bjnp

sylvain3800

Re : Canon MP980 - Impression impossible

bon , alors sur le pc sain le paquet n'est pas installé , cependant le filtre est bien present.
sur le pc problématique le paquet n'est plus installé (normal, puisque je te l'ai fait retiré ) mais comme le filtre n'est plus là ... cups ne veut pas imprimmer en reseau.
bon sur le pc problematique  redonne stp

cat /etc/cups/printers.conf

je veux voir si les modifications ont bien été prises en compte
ensuite réinstalle cups-backend-bjnp

sudo apt install cups-backend-bjnp

puis redonne

cat /etc/cups/printers.conf

stp

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

sudo cat /etc/cups/printers.conf

# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<DefaultPrinter Canon-MP980-series>
UUID urn:uuid:62ea665b-6dd9-3e6b-7036-b0c8fed3ce14
Info Canon MP980 series
DeviceURI bjnp://192.168.1.25:8611
State Idle
StateTime 1580669986
ConfigTime 1558204753
Type 4
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</DefaultPrinter>

sudo apt install cups-backend-bjnp

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les NOUVEAUX paquets suivants seront installés :
  cups-backend-bjnp
0 mis à jour, 1 nouvellement installés, 0 à enlever et 27 non mis à jour.
Il est nécessaire de prendre 0 o/26,0 ko dans les archives.
Après cette opération, 73,7 ko d'espace disque supplémentaires seront utilisés.
Sélection du paquet cups-backend-bjnp précédemment désélectionné.
(Lecture de la base de données... 278939 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../cups-backend-bjnp_2.0.1-1_amd64.deb ...
Dépaquetage de cups-backend-bjnp (2.0.1-1) ...
Paramétrage de cups-backend-bjnp (2.0.1-1) ...

sudo cat /etc/cups/printers.conf

# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<DefaultPrinter Canon-MP980-series>
UUID urn:uuid:62ea665b-6dd9-3e6b-7036-b0c8fed3ce14
Info Canon MP980 series
DeviceURI bjnp://192.168.1.25:8611
State Idle
StateTime 1580669986
ConfigTime 1558204753
Type 4
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</DefaultPrinter>

Je n'ai pas fait attention avant, mais dans les paramètres de l'imprimante, je n'ai pas le bouton "Imprimer une page de test"...

// Ajouté
Suivant l'endroit, le bouton est visible ou pas

Bouton non visible

Bouton visible

Dernière modification par Nico207 (Le 02/02/2020, à 20:22)

sylvain3800

Re : Canon MP980 - Impression impossible

Cela me parait bien,
tente une impression . et si cela ne marche pas, redonne le retour de :

cat /var/log/cups/error_log

---

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Nico207

Re : Canon MP980 - Impression impossible

Non, toujours acune réaction de la part de l'imprimante...

cat /var/log/cups/error_log

E [02/Feb/2020:17:08:15 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [02/Feb/2020:17:08:15 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [02/Feb/2020:17:08:15 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [02/Feb/2020:17:08:15 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
E [02/Feb/2020:17:13:08 +0100] [cups-deviced] PID 7761 (gutenprint52+usb) stopped with status 1!
E [02/Feb/2020:17:13:41 +0100] [cups-deviced] PID 7841 (gutenprint52+usb) stopped with status 1!
E [02/Feb/2020:17:14:04 +0100] [cups-deviced] PID 7998 (gutenprint52+usb) stopped with status 1!
W [02/Feb/2020:17:14:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:15:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:15:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:16:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:16:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:17:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:17:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:18:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:18:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:19:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:19:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:20:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:20:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:21:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:21:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:22:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:22:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:23:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:23:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:24:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:24:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:25:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:25:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:26:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:26:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:27:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:27:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:28:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:28:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:29:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:29:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:30:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:30:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:31:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:31:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:32:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:32:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:33:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:33:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:34:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:34:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:35:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:35:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:36:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:36:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:37:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:37:35 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:38:05 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:38:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:39:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:39:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:40:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:40:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:41:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:41:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:42:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:42:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:43:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:43:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:44:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:44:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:45:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:45:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:46:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:46:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:47:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:47:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:48:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:48:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:49:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:49:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:50:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:50:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:51:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:51:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:52:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:52:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:53:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:53:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:54:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:54:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:55:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:55:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:56:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:56:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:57:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:57:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:58:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:58:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:59:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:17:59:36 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:18:00:06 +0100] [Job 116] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:18:01:41 +0100] [Job 117] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
E [02/Feb/2020:18:03:09 +0100] MP980: File \"/usr/lib/cups/backend/bjnp\" not available: No such file or directory
E [02/Feb/2020:18:03:09 +0100] [Job 118] Stopping job because the sheduler could not execute the backend.
E [02/Feb/2020:18:07:48 +0100] MP980: File \"/usr/lib/cups/backend/bjnp\" not available: No such file or directory
E [02/Feb/2020:18:07:48 +0100] [Job 119] Stopping job because the sheduler could not execute the backend.
E [02/Feb/2020:18:08:12 +0100] [cups-deviced] PID 10521 (gutenprint52+usb) stopped with status 1!
E [02/Feb/2020:19:58:24 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:58:24 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:58:24 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:58:24 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:59:23 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:59:23 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:59:23 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [02/Feb/2020:19:59:23 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
E [02/Feb/2020:20:05:00 +0100] [cups-deviced] PID 4464 (gutenprint52+usb) stopped with status 1!
W [02/Feb/2020:20:05:25 +0100] [Job 120] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:20:05:55 +0100] [Job 120] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
E [02/Feb/2020:20:10:21 +0100] [cups-deviced] PID 4791 (gutenprint52+usb) stopped with status 1!
W [02/Feb/2020:20:10:55 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-Gray..\' already exists
W [02/Feb/2020:20:10:55 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-RGB..\' already exists
W [02/Feb/2020:20:10:58 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-Gray..\' already exists
W [02/Feb/2020:20:10:58 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-RGB..\' already exists
W [02/Feb/2020:20:11:00 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-Gray..\' already exists
W [02/Feb/2020:20:11:00 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MP980-RGB..\' already exists
W [02/Feb/2020:20:11:15 +0100] [Job 121] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:20:11:48 +0100] [Job 122] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
W [02/Feb/2020:20:12:17 +0100] [Job 123] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...
E [03/Feb/2020:19:54:53 +0100] Unknown directive JobPrivateAccess on line 122 of /etc/cups/cupsd.conf.
E [03/Feb/2020:19:54:53 +0100] Unknown directive JobPrivateValues on line 123 of /etc/cups/cupsd.conf.
E [03/Feb/2020:19:54:53 +0100] Unknown directive SubscriptionPrivateAccess on line 124 of /etc/cups/cupsd.conf.
E [03/Feb/2020:19:54:53 +0100] Unknown directive SubscriptionPrivateValues on line 125 of /etc/cups/cupsd.conf.
E [03/Feb/2020:19:54:53 +0100] [Job 120] Unable to queue job for destination "Canon-MP980-series-2".
W [03/Feb/2020:19:56:53 +0100] [Job 124] Network host \'192.168.1.25\' is out of paper, will retry in 30 seconds...