[Résolu] connexion filaire et wifi qui disparait à chaque démarage

damien1 · Le 25/04/2020, à 15:30

dkrumb@krumb-emachine:~$ lsmod | sort
ahci                   40960  2
arc4                   16384  2
autofs4                40960  2
binfmt_misc            20480  1
ccm                    20480  6
cfg80211              634880  2 mt7601u,mac80211
coretemp               16384  0
dcdbas                 16384  1 dell_smbios
dell_smbios            24576  1 dell_wmi
dell_wmi               16384  0
dell_wmi_descriptor    16384  2 dell_wmi,dell_smbios
drm                   401408  4 drm_kms_helper,i915
drm_kms_helper        172032  1 i915
e1000e                249856  0
fb_sys_fops            16384  1 drm_kms_helper
gpio_ich               16384  0
hid                   118784  2 usbhid,hid_generic
hid_generic            16384  0
i2c_algo_bit           16384  1 i915
i915                 1622016  2
input_leds             16384  0
ip_tables              28672  0
irqbypass              16384  1 kvm
joydev                 24576  0
kvm                   610304  0
libahci                32768  1 ahci
lp                     20480  0
lpc_ich                24576  0
mac80211              786432  1 mt7601u
mac_hid                16384  0
media                  40960  2 videodev,uvcvideo
mei                    94208  1 mei_me
mei_me                 40960  0
Module                  Size  Used by
mt7601u               102400  0
parport                49152  3 parport_pc,lp,ppdev
parport_pc             32768  1
pata_acpi              16384  0
ppdev                  20480  0
pps_core               20480  1 ptp
psmouse               151552  0
ptp                    20480  1 e1000e
sch_fq_codel           20480  6
serio_raw              16384  0
shpchp                 36864  0
snd                    81920  20 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_analog,snd_hda_codec,snd_timer,snd_pcm,snd_rawmidi
snd_hda_codec         126976  3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_analog
snd_hda_codec_analog    16384  1
snd_hda_codec_generic    73728  1 snd_hda_codec_analog
snd_hda_core           81920  4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_analog,snd_hda_codec
snd_hda_intel          45056  3
snd_hwdep              20480  2 snd_usb_audio,snd_hda_codec
snd_pcm                98304  4 snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core
snd_rawmidi            32768  2 snd_seq_midi,snd_usbmidi_lib
snd_seq                65536  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
snd_usb_audio         204800  1
snd_usbmidi_lib        32768  1 snd_usb_audio
soundcore              16384  1 snd
sparse_keymap          16384  1 dell_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
uas                    24576  0
ums_realtek            20480  0
usbhid                 49152  0
usb_storage            69632  2 uas,ums_realtek
uvcvideo               86016  0
video                  45056  2 dell_wmi,i915
videobuf2_core         40960  2 videobuf2_v4l2,uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         24576  1 uvcvideo
videobuf2_vmalloc      16384  1 uvcvideo
videodev              184320  3 videobuf2_core,videobuf2_v4l2,uvcvideo
wmi                    24576  4 dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor
wmi_bmof               16384  0
x_tables               40960  1 ip_tables

ylag · Le 25/04/2020, à 15:40

Re,

Le retour au #26 me semble normal, je ne sais pas pourquoi tu dois charger le module mt7601u manuellement au démarrage.
Faudrait voir ce que @xubu1957 en dit...

Ajout: Tu pourrais aussi démarrer avec la clé usb débranchée et l'insérer une fois ta session ouverte, puis attendre environ 30 seondes et donner le retour de la commande dmesg ?

A+

Dernière modification par ylag (Le 25/04/2020, à 15:49)

xubu1957 · Le 25/04/2020, à 16:00

Les pilotes Mediatek sont complexes > Bluetooth - Installation du pilote MT7630E ,

Ma seule capacité est de rechercher des solutions sur le Net, mais expliquer pourquoi le pilote ne fonctionne pas, je ne sais pas. ¯\_(ツ)_/¯

damien1 · Le 25/04/2020, à 16:02

voici le retour de dmesg j'ai copié toute la fenetre mais il semble manquer le début??

[   48.709777] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20170831/utaddress-247)
[   48.709780] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20170831/utaddress-247)
[   48.709782] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20170831/utaddress-247)
[   48.709786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.709788] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20170831/utaddress-247)
[   48.709791] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20170831/utaddress-247)
[   48.709794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.709795] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20170831/utaddress-247)
[   48.709798] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20170831/utaddress-247)
[   48.709801] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.709826] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   48.777413] fbcon: inteldrmfb (fb0) is primary device
[   48.777531] Console: switching to colour frame buffer device 240x67
[   48.777573] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   48.940603] audit: type=1400 audit(1587822737.171:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=442 comm="apparmor_parser"
[   48.940607] audit: type=1400 audit(1587822737.171:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=442 comm="apparmor_parser"
[   48.943382] audit: type=1400 audit(1587822737.171:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
[   48.943385] audit: type=1400 audit(1587822737.171:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[   48.943387] audit: type=1400 audit(1587822737.171:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=443 comm="apparmor_parser"
[   48.943389] audit: type=1400 audit(1587822737.171:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   48.945357] audit: type=1400 audit(1587822737.175:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=446 comm="apparmor_parser"
[   48.946908] audit: type=1400 audit(1587822737.175:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=447 comm="apparmor_parser"
[   48.946910] audit: type=1400 audit(1587822737.175:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=447 comm="apparmor_parser"
[   48.946912] audit: type=1400 audit(1587822737.175:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=447 comm="apparmor_parser"
[   49.072870] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1984A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[   49.072873] snd_hda_codec_analog hdaudioC0D2:    speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[   49.072875] snd_hda_codec_analog hdaudioC0D2:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   49.072876] snd_hda_codec_analog hdaudioC0D2:    mono: mono_out=0x0
[   49.072877] snd_hda_codec_analog hdaudioC0D2:    inputs:
[   49.072879] snd_hda_codec_analog hdaudioC0D2:      Mic=0x14
[   49.072880] snd_hda_codec_analog hdaudioC0D2:      Line=0x15
[   49.082208] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   49.082267] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   49.082319] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   49.082373] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   49.363024] kvm: disabled by bios
[   49.402990] intel_powerclamp: No package C-state available
[   49.405992] kvm: disabled by bios
[   49.449517] intel_powerclamp: No package C-state available
[   49.449720] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   49.572366] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   49.574375] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
[   49.589447] gpio_ich: GPIO from 440 to 511 on gpio_ich
[   49.646657] media: Linux media interface: v0.10
[   49.664361] Linux video capture interface: v2.00
[   49.680396] usb 1-1.1: current rate 0 is different from the runtime rate 8000
[   49.684770] usb 1-1.1: current rate 0 is different from the runtime rate 16000
[   49.689768] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[   49.694392] usb 1-1.1: current rate 0 is different from the runtime rate 48000
[   49.708897] usb 1-1.1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[   49.708900] usb 1-1.1: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
[   49.709070] usbcore: registered new interface driver snd-usb-audio
[   49.716253] uvcvideo: Found UVC 1.00 device HP 720p HD Monitor Webcam (04f2:b2c3)
[   49.736591] uvcvideo 1-1.1:1.0: Entity type for entity Extension 3 was not initialized!
[   49.736594] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[   49.736596] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   49.736693] input: HP 720p HD Monitor Webcam: HP 7 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input14
[   49.737051] usbcore: registered new interface driver uvcvideo
[   49.737052] USB Video Class driver (1.1.1)
[   51.072587] Adding 2650688k swap on /dev/sda2.  Priority:-2 extents:1 across:2650688k FS
[   78.728064] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[   84.355103] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   84.540293] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   88.576917] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   88.577053] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   92.242306] kauditd_printk_skb: 19 callbacks suppressed
[   92.242308] audit: type=1400 audit(1587822780.475:31): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=956 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0
[  112.108068] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  116.183770] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[  116.412396] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[  116.594270] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[  137.143208] audit: type=1400 audit(1587822825.371:32): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/conf.d/" pid=1325 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  137.143420] audit: type=1400 audit(1587822825.371:33): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/select.conf" pid=1325 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  137.143790] traps: evince-thumbnai[1325] general protection ip:7fb1b4baf207 sp:7fff9f796880 error:0 in libc-2.27.so[7fb1b4b18000+1e7000]
[  139.208198] audit: type=1400 audit(1587822827.439:34): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/conf.d/" pid=1335 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.208357] audit: type=1400 audit(1587822827.439:35): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/select.conf" pid=1335 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.208860] traps: evince-thumbnai[1335] general protection ip:7f8bc6bb0207 sp:7ffdc15f3990 error:0 in libc-2.27.so[7f8bc6b19000+1e7000]
[  139.453521] audit: type=1400 audit(1587822827.683:36): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.thumbnails/normal/e3ae0e31c2fa7e9f0bfe9f797035eba4.png" pid=1343 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[  139.570303] audit: type=1400 audit(1587822827.799:37): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/conf.d/" pid=1348 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.570486] audit: type=1400 audit(1587822827.799:38): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/select.conf" pid=1348 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.570881] traps: evince-thumbnai[1348] general protection ip:7f50d8028207 sp:7ffcaacdc3f0 error:0 in libc-2.27.so[7f50d7f91000+1e7000]
[  165.680066] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  193.408171] e1000e: eth1 NIC Link is Down
[  219.616913] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  237.416310] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  250.376347] usb 2-1: new high-speed USB device number 4 using ehci-pci
[  250.546133] usb 2-1: New USB device found, idVendor=148f, idProduct=7601
[  250.546136] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  250.546138] usb 2-1: Product: 802.11 n WLAN
[  250.546140] usb 2-1: Manufacturer: MediaTek
[  250.546141] usb 2-1: SerialNumber: 1.0
[  250.562537] mt7601Usta: version magic '4.4.0-177-generic SMP mod_unload modversions ' should be '4.15.0-96-generic SMP mod_unload '
[  311.436402] usb 2-4: reset high-speed USB device number 2 using ehci-pci
dkrumb@krumb-emachine:~$ sudo dmesg
[    0.000000] Linux version 4.15.0-96-generic (buildd@lgw01-amd64-004) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #97-Ubuntu SMP Wed Apr 1 03:25:46 UTC 2020 (Ubuntu 4.15.0-96.97-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-96-generic root=UUID=b0de3919-f93e-47a7-8bef-b86cdbec951a ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdbffbff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdbffc00-0x00000000bdc53bff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdc53c00-0x00000000bdc55bff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdc55c00-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. OptiPlex 780                 /0200DY, BIOS A15 08/06/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D7FFF write-protect
[    0.000000]   D8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0BDE00000 mask FFFE00000 uncachable
[    0.000000]   1 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   2 base 0BDD00000 mask FFFF00000 uncachable
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbdbff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] BRK [0x69d91000, 0x69d91fff] PGTABLE
[    0.000000] BRK [0x69d92000, 0x69d92fff] PGTABLE
[    0.000000] BRK [0x69d93000, 0x69d93fff] PGTABLE
[    0.000000] BRK [0x69d94000, 0x69d94fff] PGTABLE
[    0.000000] BRK [0x69d95000, 0x69d95fff] PGTABLE
[    0.000000] BRK [0x69d96000, 0x69d96fff] PGTABLE
[    0.000000] BRK [0x69d97000, 0x69d97fff] PGTABLE
[    0.000000] BRK [0x69d98000, 0x69d98fff] PGTABLE
[    0.000000] BRK [0x69d99000, 0x69d99fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x334cc000-0x35a5dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000000FC7F2 000074 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000000FC922 0000F4 (v03 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-603)
[    0.000000] ACPI: DSDT 0x00000000FFEA3664 005035 (v01 DELL   dt_ex    00001000 INTL 20050624)
[    0.000000] ACPI: FACS 0x00000000BDBFFC00 000040
[    0.000000] ACPI: FACS 0x00000000BDBFFC00 000040
[    0.000000] ACPI: SSDT 0x00000000FFEA87BA 0000AC (v01 DELL   st_ex    00001000 INTL 20050624)
[    0.000000] ACPI: APIC 0x00000000000FCA16 000092 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: BOOT 0x00000000000FCAA8 000028 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: ASF! 0x00000000000FCAD0 000096 (v32 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: MCFG 0x00000000000FCB66 00003C (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: HPET 0x00000000000FCBA2 000038 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: TCPA 0x00000000000FCDFE 000032 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: ____ 0x00000000000FCE30 000030 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: SLIC 0x00000000000FCBDA 000176 (v01 DELL   B10K     00000015 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x237fd2000-0x237ffcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bdbfefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000] Reserved but unavailable: 103 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
[    0.000000] On node 0 totalpages: 2055064
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12080 pages used for memmap
[    0.000000]   DMA32 zone: 773119 pages, LIFO batch:31
[    0.000000]   Normal zone: 19968 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdbff000-0xbdbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc00000-0xbdc52fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc53000-0xbdc53fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc54000-0xbdc54fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc55000-0xbdc55fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc56000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2022931
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-96-generic root=UUID=b0de3919-f93e-47a7-8bef-b86cdbec951a ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7956768K/8220256K available (12300K kernel code, 2481K rwdata, 4264K rodata, 2432K init, 2712K bss, 263488K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39351 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20170831/tbprint-211)
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2992.328 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.65 BogoMIPS (lpj=11969312)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.030919] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033391] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.033488] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.033573] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.033887] CPU0: Thermal monitoring enabled (TM1)
[    0.033890] process: using mwait in idle threads
[    0.033894] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.033895] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.033897] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.033898] Spectre V2 : Mitigation: Full generic retpoline
[    0.033899] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.033900] Speculative Store Bypass: Vulnerable
[    0.033930] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.034113] Freeing SMP alternatives memory: 36K
[    0.144665] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.144786] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.144793] ... version:                2
[    0.144794] ... bit width:              40
[    0.144795] ... generic registers:      2
[    0.144795] ... value mask:             000000ffffffffff
[    0.144796] ... max period:             000000007fffffff
[    0.144796] ... fixed-purpose events:   3
[    0.144797] ... event mask:             0000000700000003
[    0.144858] Hierarchical SRCU implementation.
[    0.146298] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.146314] smp: Bringing up secondary CPUs ...
[    0.146420] x86: Booting SMP configuration:
[    0.146420] .... node  #0, CPUs:      #1
[    0.148037] smp: Brought up 1 node, 2 CPUs
[    0.148037] smpboot: Max logical packages: 4
[    0.148037] smpboot: Total of 2 processors activated (11969.31 BogoMIPS)
[    0.152319] devtmpfs: initialized
[    0.152319] x86/mm: Memory block size: 128MB
[    0.152953] evm: security.selinux
[    0.152953] evm: security.SMACK64
[    0.152954] evm: security.SMACK64EXEC
[    0.152955] evm: security.SMACK64TRANSMUTE
[    0.152955] evm: security.SMACK64MMAP
[    0.152956] evm: security.apparmor
[    0.152956] evm: security.ima
[    0.152957] evm: security.capability
[    0.152989] PM: Registering ACPI NVS region [mem 0xbdbffc00-0xbdc53bff] (344064 bytes)
[    0.152989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.152989] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.152989] pinctrl core: initialized pinctrl subsystem
[    0.152989] RTC time: 13:51:28, date: 04/25/20
[    0.152989] NET: Registered protocol family 16
[    0.152989] audit: initializing netlink subsys (disabled)
[    0.152989] audit: type=2000 audit(1587822687.152:1): state=initialized audit_enabled=0 res=1
[    0.152989] cpuidle: using governor ladder
[    0.152989] cpuidle: using governor menu
[    0.152989] Simple Boot Flag at 0x7a set to 0x1
[    0.152989] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.152989] ACPI: bus type PCI registered
[    0.152989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152989] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.152989] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.152989] PCI: Using configuration type 1 for base access
[    0.153384] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.153384] ACPI: Added _OSI(Module Device)
[    0.153384] ACPI: Added _OSI(Processor Device)
[    0.153384] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.153384] ACPI: Added _OSI(Processor Aggregator Device)
[    0.153384] ACPI: Added _OSI(Linux-Dell-Video)
[    0.153384] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.153384] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.194329] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.240589] ACPI: Interpreter enabled
[    0.240608] ACPI: (supports S0 S1 S3 S4 S5)
[    0.240609] ACPI: Using IOAPIC for interrupt routing
[    0.240724] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.240932] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.504164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.504169] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.504174] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.504184] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.513641] PCI host bridge to bus 0000:00
[    0.513644] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.513645] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.513646] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.513647] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[    0.513649] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.513650] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000 window]
[    0.513651] pci_bus 0000:00: root bus resource [mem 0xbdd00000-0xf7ffffff window]
[    0.513652] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff window]
[    0.513653] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window]
[    0.513655] pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff window]
[    0.513656] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window]
[    0.513657] pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff window]
[    0.513658] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff window]
[    0.513660] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.513667] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[    0.513687] DMAR: Forcing write-buffer flush capability
[    0.513688] DMAR: Disabling IOMMU for graphics on this chipset
[    0.514043] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
[    0.514076] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.514434] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[    0.514444] pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
[    0.514448] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.514452] pci 0000:00:02.0: reg 0x20: [io  0xecb0-0xecb7]
[    0.514816] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[    0.514825] pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
[    0.515197] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[    0.515223] pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
[    0.515308] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.515662] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[    0.515687] pci 0000:00:03.2: reg 0x10: [io  0xfe80-0xfe87]
[    0.515697] pci 0000:00:03.2: reg 0x14: [io  0xfe90-0xfe93]
[    0.515706] pci 0000:00:03.2: reg 0x18: [io  0xfea0-0xfea7]
[    0.515716] pci 0000:00:03.2: reg 0x1c: [io  0xfeb0-0xfeb3]
[    0.515726] pci 0000:00:03.2: reg 0x20: [io  0xfef0-0xfeff]
[    0.516238] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[    0.516263] pci 0000:00:03.3: reg 0x10: [io  0xecb8-0xecbf]
[    0.516273] pci 0000:00:03.3: reg 0x14: [mem 0xf7ad8000-0xf7ad8fff]
[    0.516727] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[    0.516742] pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
[    0.516749] pci 0000:00:19.0: reg 0x14: [mem 0xf7ad9000-0xf7ad9fff]
[    0.516755] pci 0000:00:19.0: reg 0x18: [io  0xece0-0xecff]
[    0.516805] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.517158] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[    0.517195] pci 0000:00:1a.0: reg 0x20: [io  0xff20-0xff3f]
[    0.517581] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[    0.517618] pci 0000:00:1a.1: reg 0x20: [io  0xff00-0xff1f]
[    0.518001] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[    0.518038] pci 0000:00:1a.2: reg 0x20: [io  0xfc00-0xfc1f]
[    0.518427] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[    0.518446] pci 0000:00:1a.7: reg 0x10: [mem 0xf7ada000-0xf7ada3ff]
[    0.518517] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.518872] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[    0.518890] pci 0000:00:1b.0: reg 0x10: [mem 0xf7adc000-0xf7adffff 64bit]
[    0.518950] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.519308] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
[    0.519370] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.519734] pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
[    0.519797] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.520171] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[    0.520208] pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
[    0.520593] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[    0.520630] pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
[    0.521013] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[    0.521050] pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
[    0.521440] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[    0.521458] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
[    0.521529] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.521879] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.522275] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[    0.522715] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.522730] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
[    0.522736] pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
[    0.522742] pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
[    0.522748] pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
[    0.522754] pci 0000:00:1f.2: reg 0x20: [io  0xfec0-0xfedf]
[    0.522760] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
[    0.522794] pci 0000:00:1f.2: PME# supported from D3hot
[    0.523145] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[    0.523160] pci 0000:00:1f.3: reg 0x10: [mem 0xf7adb000-0xf7adb0ff 64bit]
[    0.523177] pci 0000:00:1f.3: reg 0x20: [io  0x0980-0x099f]
[    0.523560] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.523563] pci 0000:00:01.0:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.523601] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.523605] pci 0000:00:1c.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.523643] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.523647] pci 0000:00:1c.1:   bridge window [mem 0xf7700000-0xf77fffff]
[    0.523707] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.523714] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.523716] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.523717] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.523718] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[    0.523720] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.523721] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfec00000 window] (subtractive decode)
[    0.523722] pci 0000:00:1e.0:   bridge window [mem 0xbdd00000-0xf7ffffff window] (subtractive decode)
[    0.523723] pci 0000:00:1e.0:   bridge window [mem 0xff980000-0xff980fff window] (subtractive decode)
[    0.523725] pci 0000:00:1e.0:   bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode)
[    0.523726] pci 0000:00:1e.0:   bridge window [mem 0xff970000-0xff9707ff window] (subtractive decode)
[    0.523727] pci 0000:00:1e.0:   bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode)
[    0.523729] pci 0000:00:1e.0:   bridge window [mem 0xfeda6000-0xfeda6fff window] (subtractive decode)
[    0.523730] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfeda7fff window] (subtractive decode)
[    0.555200] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.556107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.557016] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.557915] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.558847] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.559747] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    0.560654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.561566] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.562229] SCSI subsystem initialized
[    0.562239] libata version 3.00 loaded.
[    0.562239] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.562239] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.562239] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.562239] vgaarb: loaded
[    0.562239] ACPI: bus type USB registered
[    0.562239] usbcore: registered new interface driver usbfs
[    0.562239] usbcore: registered new interface driver hub
[    0.562239] usbcore: registered new device driver usb
[    0.562239] EDAC MC: Ver: 3.0.0
[    0.562239] PCI: Using ACPI for IRQ routing
[    0.565169] PCI: pci_cache_line_size set to 64 bytes
[    0.565215] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.565216] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.565217] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[    0.565218] e820: reserve RAM buffer [mem 0xbdbffc00-0xbfffffff]
[    0.565311] NetLabel: Initializing
[    0.565311] NetLabel:  domain hash size = 128
[    0.565312] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.565327] NetLabel:  unlabeled traffic allowed by default
[    0.565345] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.565345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[    0.565345] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.568022] hpet: hpet2 irq 24 for MSI
[    0.568031] hpet: hpet3 irq 25 for MSI
[    0.568033] clocksource: Switched to clocksource hpet
[    0.582406] VFS: Disk quotas dquot_6.6.0
[    0.582429] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.582566] AppArmor: AppArmor Filesystem Enabled
[    0.582602] pnp: PnP ACPI init
[    0.585967] system 00:00: [io  0x0800-0x085f] has been reserved
[    0.585969] system 00:00: [io  0x0c00-0x0c7f] has been reserved
[    0.585970] system 00:00: [io  0x0860-0x08ff] has been reserved
[    0.585976] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.586206] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.600054] pnp 00:02: [dma 0 disabled]
[    0.601240] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.606544] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.620963] pnp: PnP ACPI: found 4 devices
[    0.627535] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.627551] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.627553] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.627559] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.627561] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.627578] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
[    0.627583] pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.627585] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.627587] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.627589] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.627592] pci 0000:00:01.0:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.627596] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.627598] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.627601] pci 0000:00:1c.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.627604] pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[    0.627608] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.627610] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.627613] pci 0000:00:1c.1:   bridge window [mem 0xf7700000-0xf77fffff]
[    0.627616] pci 0000:00:1c.1:   bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.627620] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.627629] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.627630] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.627631] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.627632] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[    0.627633] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.627635] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000 window]
[    0.627636] pci_bus 0000:00: resource 10 [mem 0xbdd00000-0xf7ffffff window]
[    0.627637] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff window]
[    0.627638] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window]
[    0.627640] pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff window]
[    0.627641] pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff window]
[    0.627642] pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff window]
[    0.627643] pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff window]
[    0.627644] pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.627646] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.627647] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.627648] pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[    0.627650] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.627651] pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff]
[    0.627652] pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.627653] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.627655] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.627656] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.627657] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff window]
[    0.627658] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.627659] pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000 window]
[    0.627661] pci_bus 0000:04: resource 10 [mem 0xbdd00000-0xf7ffffff window]
[    0.627662] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff window]
[    0.627663] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff window]
[    0.627664] pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff window]
[    0.627665] pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff window]
[    0.627667] pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff window]
[    0.627668] pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff window]
[    0.627722] NET: Registered protocol family 2
[    0.627913] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.628194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.628670] TCP: Hash tables configured (established 65536 bind 65536)
[    0.628747] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.628805] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.628902] NET: Registered protocol family 1
[    0.628917] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.634792] PCI: CLS 64 bytes, default 64
[    0.634834] Unpacking initramfs...
[    1.150522] Freeing initrd memory: 38472K
[    1.150569] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.150570] software IO TLB: mapped [mem 0xb9bff000-0xbdbff000] (64MB)
[    1.150731] Scanning for low memory corruption every 60 seconds
[    1.151452] Initialise system trusted keyrings
[    1.151463] Key type blacklist registered
[    1.151539] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.153042] zbud: loaded
[    1.153549] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.153716] fuse init (API version 7.26)
[    1.155256] Key type asymmetric registered
[    1.155258] Asymmetric key parser 'x509' registered
[    1.155291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.155328] io scheduler noop registered
[    1.155329] io scheduler deadline registered
[    1.155386] io scheduler cfq registered (default)
[    1.156949] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.156950] vesafb: scrolling: redraw
[    1.156951] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.156963] vesafb: framebuffer at 0xe0000000, mapped to 0x        (ptrval), using 5120k, total 5120k
[    1.157077] Console: switching to colour frame buffer device 160x64
[    1.157105] fb0: VESA VGA frame buffer device
[    1.157119] intel_idle: does not run on family 6 model 23
[    1.157190] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.157215] ACPI: Power Button [VBTN]
[    1.157260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.157272] ACPI: Power Button [PWRF]
[    1.159223] Monitor-Mwait will be used to enter C-1 state
[    1.161356] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.181769] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.188008] random: fast init done
[    1.204088] 0000:00:03.3: ttyS4 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
[    1.204491] Linux agpgart interface v0.103
[    1.206359] loop: module loaded
[    1.207181] scsi host0: ata_generic
[    1.207272] scsi host1: ata_generic
[    1.207307] ata1: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
[    1.207308] ata2: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
[    1.207368] libphy: Fixed MDIO Bus: probed
[    1.207369] tun: Universal TUN/TAP device driver, 1.6
[    1.207435] PPP generic driver version 2.4.2
[    1.207473] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.207478] ehci-pci: EHCI PCI platform driver
[    1.207875] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.207881] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.207891] ehci-pci 0000:00:1a.7: debug port 1
[    1.211786] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.211796] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ada000
[    1.224021] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.224073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.224076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.224078] usb usb1: Product: EHCI Host Controller
[    1.224080] usb usb1: Manufacturer: Linux 4.15.0-96-generic ehci_hcd
[    1.224081] usb usb1: SerialNumber: 0000:00:1a.7
[    1.224210] hub 1-0:1.0: USB hub found
[    1.224216] hub 1-0:1.0: 6 ports detected
[    1.224740] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.224745] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.224753] ehci-pci 0000:00:1d.7: debug port 1
[    1.228661] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.228672] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
[    1.244021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.244083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.244085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.244087] usb usb2: Product: EHCI Host Controller
[    1.244089] usb usb2: Manufacturer: Linux 4.15.0-96-generic ehci_hcd
[    1.244090] usb usb2: SerialNumber: 0000:00:1d.7
[    1.244204] hub 2-0:1.0: USB hub found
[    1.244210] hub 2-0:1.0: 6 ports detected
[    1.244342] ehci-platform: EHCI generic platform driver
[    1.244350] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.244352] ohci-pci: OHCI PCI platform driver
[    1.244361] ohci-platform: OHCI generic platform driver
[    1.244367] uhci_hcd: USB Universal Host Controller Interface driver
[    1.244742] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.244747] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.244752] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.244773] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    1.244812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.244814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.244815] usb usb3: Product: UHCI Host Controller
[    1.244816] usb usb3: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
[    1.244817] usb usb3: SerialNumber: 0000:00:1a.0
[    1.244900] hub 3-0:1.0: USB hub found
[    1.244906] hub 3-0:1.0: 2 ports detected
[    1.245352] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.245360] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.245365] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.245387] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    1.245426] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.245427] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.245429] usb usb4: Product: UHCI Host Controller
[    1.245430] usb usb4: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
[    1.245431] usb usb4: SerialNumber: 0000:00:1a.1
[    1.245512] hub 4-0:1.0: USB hub found
[    1.245517] hub 4-0:1.0: 2 ports detected
[    1.245965] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.245970] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.245975] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.245990] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[    1.246028] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.246029] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.246030] usb usb5: Product: UHCI Host Controller
[    1.246032] usb usb5: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
[    1.246033] usb usb5: SerialNumber: 0000:00:1a.2
[    1.246113] hub 5-0:1.0: USB hub found
[    1.246118] hub 5-0:1.0: 2 ports detected
[    1.246567] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.246572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.246577] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.246592] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    1.246631] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.246633] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.246634] usb usb6: Product: UHCI Host Controller
[    1.246635] usb usb6: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
[    1.246636] usb usb6: SerialNumber: 0000:00:1d.0
[    1.246725] hub 6-0:1.0: USB hub found
[    1.246730] hub 6-0:1.0: 2 ports detected
[    1.247177] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.247181] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.247186] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.247201] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    1.247241] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.247242] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.247243] usb usb7: Product: UHCI Host Controller
[    1.247245] usb usb7: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
[    1.247246] usb usb7: SerialNumber: 0000:00:1d.1
[    1.247329] hub 7-0:1.0: USB hub found
[    1.247334] hub 7-0:1.0: 2 ports detected
[    1.247779] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.247783] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.247788] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.247803] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    1.247844] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.247845] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.247846] usb usb8: Product: UHCI Host Controller
[    1.247847] usb usb8: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
[    1.247849] usb usb8: SerialNumber: 0000:00:1d.2
[    1.247930] hub 8-0:1.0: USB hub found
[    1.247935] hub 8-0:1.0: 2 ports detected
[    1.248063] i8042: PNP: No PS/2 controller found.
[    1.248064] i8042: Probing ports directly.
[    1.250784] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.250788] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.250898] mousedev: PS/2 mouse device common for all mice
[    1.251027] rtc_cmos 00:01: RTC can wake from S4
[    1.251124] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.251144] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[    1.251150] i2c /dev entries driver
[    1.251196] device-mapper: uevent: version 1.0.3
[    1.251255] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.251278] ledtrig-cpu: registered to indicate activity on CPUs
[    1.251605] NET: Registered protocol family 10
[    1.255861] Segment Routing with IPv6
[    1.255879] NET: Registered protocol family 17
[    1.255916] Key type dns_resolver registered
[    1.256056] mce: Using 6 MCE banks
[    1.256067] RAS: Correctable Errors collector initialized.
[    1.256096] microcode: sig=0x1067a, pf=0x1, revision=0xa0c
[    1.256129] microcode: Microcode Update Driver: v2.2.
[    1.256137] sched_clock: Marking stable (1256124725, 0)->(1229510746, 26613979)
[    1.256293] registered taskstats version 1
[    1.256303] Loading compiled-in X.509 certificates
[    1.259012] Loaded X.509 cert 'Build time autogenerated kernel key: 244b473b43e18b01f00e37a87f2ecd28620f0244'
[    1.259027] zswap: loaded using pool lzo/zbud
[    1.262646] Key type big_key registered
[    1.262650] Key type trusted registered
[    1.264459] Key type encrypted registered
[    1.264462] AppArmor: AppArmor sha1 policy hashing enabled
[    1.264464] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.264467] ima: Allocated hash algorithm: sha1
[    1.264491] evm: HMAC attrs: 0x1
[    1.264728]   Magic number: 0:584:888
[    1.264848] rtc_cmos 00:01: setting system clock to 2020-04-25 13:51:29 UTC (1587822689)
[    1.264926] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.264927] EDD information not available.
[    1.546363] Freeing unused kernel image memory: 2432K
[    1.560032] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.560033] Write protecting the kernel read-only data: 20480k
[    1.560923] Freeing unused kernel image memory: 2008K
[    1.561613] Freeing unused kernel image memory: 1880K
[    1.570548] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.570620] x86/mm: Checking user space page tables
[    1.579573] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.580032] usb 2-4: new high-speed USB device number 2 using ehci-pci
[    1.591535] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.591649] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.591656] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.662614] pps_core: LinuxPPS API ver. 1 registered
[    1.662616] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.663824] PTP clock support registered
[    1.669776] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.669777] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.670275] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.724363] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[    1.724365] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.724521] hub 1-1:1.0: USB hub found
[    1.724609] hub 1-1:1.0: 3 ports detected
[    1.835325] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:4d:a2:2f:9e:d4
[    1.835327] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.835361] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: 2011FF-0FF
[    1.835388] ahci 0000:00:1f.2: version 3.0
[    1.835817] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[    1.835893] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl RAID mode
[    1.835895] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems sxs 
[    1.836704] e1000e 0000:00:19.0 eth1: renamed from eth0
[    1.868599] scsi host2: ahci
[    1.868689] scsi host3: ahci
[    1.868772] scsi host4: ahci
[    1.868855] scsi host5: ahci
[    1.868941] scsi host6: ahci
[    1.869027] scsi host7: ahci
[    1.869071] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 30
[    1.869073] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 30
[    1.869074] ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 30
[    1.869075] ata6: DUMMY
[    1.869076] ata7: DUMMY
[    1.869077] ata8: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 30
[    1.988054] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    2.176092] tsc: Refined TSC clocksource calibration: 2992.481 MHz
[    2.176098] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b228661c25, max_idle_ns: 440795245102 ns
[    2.182415] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.182428] ata8: SATA link down (SStatus 0 SControl 300)
[    2.182443] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.182458] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.183086] usb 4-2: New USB device found, idVendor=046d, idProduct=c016
[    2.183088] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.183090] usb 4-2: Product: Optical USB Mouse
[    2.183092] usb 4-2: Manufacturer: Logitech
[    2.183328] ata5.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
[    2.183330] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.184399] ata5.00: configured for UDMA/133
[    2.185441] ata4.00: ATAPI: HL-DT-ST DVDRAM GH40N, NV01, max UDMA/100
[    2.189076] hidraw: raw HID events driver (C) Jiri Kosina
[    2.189392] ata4.00: configured for UDMA/100
[    2.203308] usbcore: registered new interface driver usbhid
[    2.203308] usbhid: USB HID core driver
[    2.204531] ata3.00: ATA-8: Hitachi HDP725016GLA380, GMBOA52A, max UDMA/133
[    2.204532] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.205380] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/0003:046D:C016.0001/input/input5
[    2.205458] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.1-2/input0
[    2.206162] ata3.00: configured for UDMA/133
[    2.206298] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72501 A52A PQ: 0 ANSI: 5
[    2.206459] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.206469] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.206469] sd 2:0:0:0: [sda] Write Protect is off
[    2.206471] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.206485] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.208815] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40N     NV01 PQ: 0 ANSI: 5
[    2.252880]  sda: sda1 sda2 sda3
[    2.253148] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.259137] usb 2-4: New USB device found, idVendor=0bda, idProduct=0158
[    2.259139] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.259141] usb 2-4: Product: USB2.0-CRW
[    2.259143] usb 2-4: Manufacturer: Generic
[    2.259145] usb 2-4: SerialNumber: 20060413092100000
[    2.279901] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.279903] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.280025] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.280094] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.280230] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[    2.280374] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.280456] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.280458] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    2.280468] sd 4:0:0:0: [sdb] Write Protect is off
[    2.280470] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.280488] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.300060]  sdb: sdb1 sdb2
[    2.300365] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.564061] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[    2.592070] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[    2.785087] usb 8-2: New USB device found, idVendor=045e, idProduct=0745
[    2.785090] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.785092] usb 8-2: Product: Microsoft® 2.4GHz Transceiver v8.0
[    2.785093] usb 8-2: Manufacturer: Microsoft
[    2.792489] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:0745.0002/input/input6
[    2.827262] usb 1-1.1: New USB device found, idVendor=04f2, idProduct=b2c3
[    2.827264] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.827266] usb 1-1.1: Product: HP 720p HD Monitor Webcam
[    2.827268] usb 1-1.1: Manufacturer: Sunplus IT Co 
[    2.852165] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.2-2/input0
[    2.860339] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:045E:0745.0003/input/input7
[    2.920193] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.2-2/input1
[    2.929381] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:045E:0745.0004/input/input8
[    2.988211] hid-generic 0003:045E:0745.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.2-2/input2
[    3.200133] clocksource: Switched to clocksource tsc
[    3.307422] usbcore: registered new interface driver usb-storage
[    3.308663] usbcore: registered new interface driver uas
[    3.309838] ums-realtek 2-4:1.0: USB Mass Storage device detected
[    3.312656] scsi host8: usb-storage 2-4:1.0
[    3.312744] usbcore: registered new interface driver ums-realtek
[    3.604061] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[    3.765382] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.332658] scsi 8:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    4.332899] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    4.468061] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[    4.661643] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    5.233897] random: crng init done
[    5.233899] random: 7 urandom warning(s) missed due to ratelimiting
[    7.591663] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.710390] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.728129] systemd[1]: Detected architecture x86-64.
[    7.745269] systemd[1]: Set hostname to <krumb-emachine>.
[   11.595459] systemd[1]: Reached target System Time Synchronized.
[   11.595517] systemd[1]: Reached target Remote File Systems.
[   11.595565] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.595576] systemd[1]: Reached target User and Group Name Lookups.
[   11.595777] systemd[1]: Created slice System Slice.
[   11.595873] systemd[1]: Listening on Journal Socket.
[   11.595936] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.103117] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.898816] systemd[1]: Started Load/Save Random Seed.
[   12.910356] systemd[1]: Started Journal Service.
[   12.954091] systemd-journald[266]: Received request to flush runtime journal from PID 1
[   14.586584] lp: driver loaded but no devices found
[   14.838344] ppdev: user-space parallel port driver
[   15.743966] parport_pc 00:02: reported by Plug and Play ACPI
[   15.744026] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[   15.840132] lp0: using parport0 (interrupt-driven).
[   48.234823] kvm: disabled by bios
[   48.535269] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   48.593900] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[   48.647925] pci 0000:00:00.0: Intel Q45/Q43 Chipset
[   48.647948] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   48.649189] pci 0000:00:00.0: detected 32768K stolen memory
[   48.654804] [drm] Memory usable by graphics device = 2048M
[   48.654807] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[   48.654808] fb: switching to inteldrmfb from VESA VGA
[   48.654852] Console: switching to colour dummy device 80x25
[   48.654935] [drm] Replacing VGA console driver
[   48.662188] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   48.662190] [drm] Driver supports precise vblank timestamp query.
[   48.663416] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   48.671060] [drm] RC6 disabled, disabling runtime PM support
[   48.671374] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   48.709765] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20170831/utaddress-247)
[   48.709770] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20170831/utaddress-247)
[   48.709774] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20170831/utaddress-247)
[   48.709777] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20170831/utaddress-247)
[   48.709780] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20170831/utaddress-247)
[   48.709782] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20170831/utaddress-247)
[   48.709786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.709788] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20170831/utaddress-247)
[   48.709791] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20170831/utaddress-247)
[   48.709794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.709795] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20170831/utaddress-247)
[   48.709798] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20170831/utaddress-247)
[   48.709801] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.709826] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   48.777413] fbcon: inteldrmfb (fb0) is primary device
[   48.777531] Console: switching to colour frame buffer device 240x67
[   48.777573] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   48.940603] audit: type=1400 audit(1587822737.171:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=442 comm="apparmor_parser"
[   48.940607] audit: type=1400 audit(1587822737.171:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=442 comm="apparmor_parser"
[   48.943382] audit: type=1400 audit(1587822737.171:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
[   48.943385] audit: type=1400 audit(1587822737.171:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[   48.943387] audit: type=1400 audit(1587822737.171:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=443 comm="apparmor_parser"
[   48.943389] audit: type=1400 audit(1587822737.171:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   48.945357] audit: type=1400 audit(1587822737.175:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=446 comm="apparmor_parser"
[   48.946908] audit: type=1400 audit(1587822737.175:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=447 comm="apparmor_parser"
[   48.946910] audit: type=1400 audit(1587822737.175:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=447 comm="apparmor_parser"
[   48.946912] audit: type=1400 audit(1587822737.175:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=447 comm="apparmor_parser"
[   49.072870] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1984A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[   49.072873] snd_hda_codec_analog hdaudioC0D2:    speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[   49.072875] snd_hda_codec_analog hdaudioC0D2:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   49.072876] snd_hda_codec_analog hdaudioC0D2:    mono: mono_out=0x0
[   49.072877] snd_hda_codec_analog hdaudioC0D2:    inputs:
[   49.072879] snd_hda_codec_analog hdaudioC0D2:      Mic=0x14
[   49.072880] snd_hda_codec_analog hdaudioC0D2:      Line=0x15
[   49.082208] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   49.082267] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   49.082319] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   49.082373] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   49.363024] kvm: disabled by bios
[   49.402990] intel_powerclamp: No package C-state available
[   49.405992] kvm: disabled by bios
[   49.449517] intel_powerclamp: No package C-state available
[   49.449720] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   49.572366] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   49.574375] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
[   49.589447] gpio_ich: GPIO from 440 to 511 on gpio_ich
[   49.646657] media: Linux media interface: v0.10
[   49.664361] Linux video capture interface: v2.00
[   49.680396] usb 1-1.1: current rate 0 is different from the runtime rate 8000
[   49.684770] usb 1-1.1: current rate 0 is different from the runtime rate 16000
[   49.689768] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[   49.694392] usb 1-1.1: current rate 0 is different from the runtime rate 48000
[   49.708897] usb 1-1.1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[   49.708900] usb 1-1.1: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
[   49.709070] usbcore: registered new interface driver snd-usb-audio
[   49.716253] uvcvideo: Found UVC 1.00 device HP 720p HD Monitor Webcam (04f2:b2c3)
[   49.736591] uvcvideo 1-1.1:1.0: Entity type for entity Extension 3 was not initialized!
[   49.736594] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[   49.736596] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   49.736693] input: HP 720p HD Monitor Webcam: HP 7 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input14
[   49.737051] usbcore: registered new interface driver uvcvideo
[   49.737052] USB Video Class driver (1.1.1)
[   51.072587] Adding 2650688k swap on /dev/sda2.  Priority:-2 extents:1 across:2650688k FS
[   78.728064] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[   84.355103] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   84.540293] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   88.576917] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   88.577053] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   92.242306] kauditd_printk_skb: 19 callbacks suppressed
[   92.242308] audit: type=1400 audit(1587822780.475:31): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=956 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0
[  112.108068] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  116.183770] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[  116.412396] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[  116.594270] usb 1-1.1: current rate 0 is different from the runtime rate 44100
[  137.143208] audit: type=1400 audit(1587822825.371:32): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/conf.d/" pid=1325 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  137.143420] audit: type=1400 audit(1587822825.371:33): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/select.conf" pid=1325 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  137.143790] traps: evince-thumbnai[1325] general protection ip:7fb1b4baf207 sp:7fff9f796880 error:0 in libc-2.27.so[7fb1b4b18000+1e7000]
[  139.208198] audit: type=1400 audit(1587822827.439:34): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/conf.d/" pid=1335 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.208357] audit: type=1400 audit(1587822827.439:35): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/select.conf" pid=1335 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.208860] traps: evince-thumbnai[1335] general protection ip:7f8bc6bb0207 sp:7ffdc15f3990 error:0 in libc-2.27.so[7f8bc6b19000+1e7000]
[  139.453521] audit: type=1400 audit(1587822827.683:36): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.thumbnails/normal/e3ae0e31c2fa7e9f0bfe9f797035eba4.png" pid=1343 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[  139.570303] audit: type=1400 audit(1587822827.799:37): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/conf.d/" pid=1348 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.570486] audit: type=1400 audit(1587822827.799:38): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/krumb/.config/font-manager/select.conf" pid=1348 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  139.570881] traps: evince-thumbnai[1348] general protection ip:7f50d8028207 sp:7ffcaacdc3f0 error:0 in libc-2.27.so[7f50d7f91000+1e7000]
[  165.680066] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  193.408171] e1000e: eth1 NIC Link is Down
[  219.616913] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  237.416310] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  250.376347] usb 2-1: new high-speed USB device number 4 using ehci-pci
[  250.546133] usb 2-1: New USB device found, idVendor=148f, idProduct=7601
[  250.546136] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  250.546138] usb 2-1: Product: 802.11 n WLAN
[  250.546140] usb 2-1: Manufacturer: MediaTek
[  250.546141] usb 2-1: SerialNumber: 1.0
[  250.562537] mt7601Usta: version magic '4.4.0-177-generic SMP mod_unload modversions ' should be '4.15.0-96-generic SMP mod_unload '
[  311.436402] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  362.958130] usb 2-4: reset high-speed USB device number 2 using ehci-pci
[  378.189501] usb 2-4: reset high-speed USB device number 2 using ehci-pci
dkrumb@krumb-emachine:~$

damien1 · Le 25/04/2020, à 16:04

et également:

dkrumb@krumb-emachine:~$ sudo modprobe --force-vermagic mt7601u
modprobe: ERROR: could not insert 'mt7601u': Exec format error

xubu1957 · Le 25/04/2020, à 16:09

On voit :

[  250.376347] usb 2-1: new high-speed USB device number 4 using ehci-pci
[  250.546133] usb 2-1: New USB device found, idVendor=148f, idProduct=7601
[  250.546136] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  250.546138] usb 2-1: Product: 802.11 n WLAN
[  250.546140] usb 2-1: Manufacturer: MediaTek
[  250.546141] usb 2-1: SerialNumber: 1.0
[  250.562537] mt7601Usta: version magic '4.4.0-177-generic SMP mod_unload modversions ' should be '4.15.0-96-generic SMP mod_unload '

damien1 · Le 25/04/2020, à 16:15

Bon, j'ai donc supprimé le noyau de la 16.04comme dit au #25 et je tente un redémarage

ylag · Le 25/04/2020, à 16:19

Re,

[ 250.562537] mt7601Usta: version magic '4.4.0-177-generic SMP mod_unload modversions ' should be '4.15.0-96-generic SMP mod_unload '

Je n'arrive pas à comprendre l'impact de ce retour, désolé.
D'ou proviendrait ce module mt7601Usta ?

@damien1: As-tu accès au Wifi lorsque tu charges manuellement le module mt7601u par la commande modprobe mt7601u ?

A+

Dernière modification par ylag (Le 25/04/2020, à 16:25)

damien1 · Le 25/04/2020, à 16:22

Donc une solution serait de changer la clé wifi?

damien1 · Le 25/04/2020, à 16:35

ylag a écrit :

Re,
@damien1: As-tu accès au Wifi lorsque tu charges manuellement le module mt7601u par la commande modprobe mt7601u ?
A+

Oui et non, la connexion est visible, mais je peux m'y connecter (le gestionnaire essaye sans y parvenir)
Sauf si je relance le gestionnaire de connexion manuellement

Dernière modification par damien1 (Le 25/04/2020, à 16:37)

xubu1957 · Le 25/04/2020, à 16:37

@ylag

pour le sta, on voit un :

sudo apt-get install mt7601-sta-dkms

dans cette discussion de bilboquey > aide pour installer un driver de clé wifi 7601 Ralink [Résolu]

ylag · Le 25/04/2020, à 16:45

Bonjour xubu1957,

Ne semble pas y avoir de paquet mt7601-sta-dkms dans les dépôts de la 18.04, il faut le ppa:thopiekar/mt7601 ?
Je ne sais pas ce que vaut ce pilote, ce serait à damien1 de voir dans ce cas...

A+

Dernière modification par ylag (Le 25/04/2020, à 16:45)

inbox · Le 25/04/2020, à 16:45

Salut,

Au vu du problème rencontré, je pense que le système n'est pas bien d'aplomb et qu'il y a des traces d'installation de pilote depuis l'extérieur.

Pour éclaircir la question, le mieux est de tester un démarrage en live session de la 18.04 (voire une 20.04) et vérifier si ton wifi et la connexion filaire fonctionnent. Si c'est le cas, le plus simple serait de réinstaller.

A+

damien1 · Le 25/04/2020, à 16:45

damien1 a écrit :

ylag a écrit :
Re,
@damien1: As-tu accès au Wifi lorsque tu charges manuellement le module mt7601u par la commande modprobe mt7601u ?
A+
Oui et non, la connexion est visible, mais je peux m'y connecter (le gestionnaire essaye sans y parvenir)
Sauf si je relance le gestionnaire de connexion manuellement

après le dernier redémarrage, juste un

sudo modprobe mt7601u

et çà fonctionne.
-> Question est ce que l'on ne peut pas automatiser ce démarrage quelque part?

ylag · Le 25/04/2020, à 16:48

Re,

damien1 a écrit :

après le dernier redémarrage, juste un
sudo modprobe mt7601u
et çà fonctionne.

Dans ce cas, essaie encore un redémarrage et dit si le module arrive à se charger automatiquement?

Les suggestions de @inbox au #38 me semblent pertinentes...

A+

xubu1957 · Le 25/04/2020, à 16:49

@ylag

Salut !

Ce PPA > launchpad.net/~thopiekar/+archive/ubuntu/mt7601 n'a plus été actualisé depuis 102 semaines.

damien1 · Le 25/04/2020, à 17:04

ylag a écrit :

Re,
damien1 a écrit :
après le dernier redémarrage, juste un
sudo modprobe mt7601u
et çà fonctionne.
Dans ce cas, essaie encore un redémarrage et dit si le module arrive à se charger automatiquement?
Les suggestions de @inbox au #38 me semblent pertinentes...
A+

Non, après encore un redémarage, je dois toujours refaire un modprobe.
Par contre avec une live USB 18.04 tout fonctionne, c'est donc un problème dans la mise à jour...
Pas trop le courage de faire une réinstalation en prenant le risque de perdre des fichiers...

inbox · Le 25/04/2020, à 17:35

Fais une sauvegarde avant.

ylag · Le 25/04/2020, à 21:05

Bonsoir,

damien1 au #24 a écrit :

La clé wifi est sur un port USB à l'arrière

Avant de passer par la réinstallation, si possible essayer en branchant la clé sur un port à l'avant ?

Une dernière tentative de contournement serait d'activer le service systemd rc-local.service et d'y inclure les commandes de rechargement du module WiFi.
C'est un peu une bidouille, mais je crois ça devrait marcher sans créer d'instabilité sur ton système.
Je le fais chez-moi pour créer des ports rfcomm au démarrage servant à connecter des récepteurs GPS Bluetooth.

Si on se fie à ce tuto: How to Enable /etc/rc.local with Systemd
On crée le fichier /etc/systemd/system/rc-local.service:

sudo nano /etc/systemd/system/rc-local.service

...dans lequel on colle ce contenu:

[Unit]
 Description=/etc/rc.local Compatibility
 ConditionPathExists=/etc/rc.local

[Service]
 Type=forking
 ExecStart=/etc/rc.local start
 TimeoutSec=0
 StandardOutput=tty
 RemainAfterExit=yes
 SysVStartPriority=99

[Install]
 WantedBy=multi-user.target

Faire Ctrl+o (lettre minuscule « o ») suivi de la touche «Entrée» pour écrire et fermer le fichier, puis Ctrl+x pour sortir de l'éditeur nano.

Ensuite, créer un fichier /etc/rc.local:

sudo nano /etc/rc.local

...dans lequel tu colles ce contenu:

#!/bin/bash
modprobe -r mt7601u && modprobe mt7601u
exit 0

...même procédure que plus haut pour enregistrer et fermer le fichier
Il faut ensuite rendre ce fichier exécutable (important):

sudo chmod +x /etc/rc.local

On active le service rc.local:

sudo systemctl enable rc-local.service

...suivre d'un autre redémarrage, et voir si le WiFi fonctionne normalement?

Pour retourner à l'état précédent si ça ne marche pas, désactiver le service rc-local:

sudo systemctl stop rc-local.service

sudo systemctl disable rc-local.service

...et supprimer les deux fichiers créés:

sudo rm /etc/rc.local

sudo rm /etc/systemd/system/rc-local.service

A+

Dernière modification par ylag (Le 26/04/2020, à 12:29)

damien1 · Le 28/04/2020, à 20:08

ylag a écrit :

Une dernière tentative de contournement serait d'activer le service systemd rc-local.service et d'y inclure les commandes de rechargement du module WiFi.

Bravo et merci çà marche nickel , je n' y croyais plus ! J'ai redémarré 2 fois pour etre sur!

damien1 · Le 28/04/2020, à 20:13

... et merci aussi à inbox et xubu1957, la communauté ubuntu est toujours réactive et efficace!

ylag · Le 28/04/2020, à 22:34

Bonsoir,

damien1 a écrit :

... et merci çà marche nickel...

Content que ça fonctionne pour toi!

Ça reste quand même un simple contournement, pas vraiment une soluce durable.
Lors de mises à jour du noyau, tu pourrais tester en désactivant ce service pour voir si ça fonctionnerait normalement sans le service rc-local:

Pour désactiver:

sudo systemctl disable rc-local.service

...suivi d'un redémarrage.

Pour réactiver, si nécessaire:

sudo systemctl enable rc-local.service

...encore une fois suivi d'un redémarrage.

A+

Dernière modification par ylag (Le 28/04/2020, à 22:35)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 25/04/2020, à 15:30

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#27 Le 25/04/2020, à 15:40

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#28 Le 25/04/2020, à 16:00

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#29 Le 25/04/2020, à 16:02

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#30 Le 25/04/2020, à 16:04

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#31 Le 25/04/2020, à 16:09

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#32 Le 25/04/2020, à 16:15

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#33 Le 25/04/2020, à 16:19

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#34 Le 25/04/2020, à 16:22

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#35 Le 25/04/2020, à 16:35

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#36 Le 25/04/2020, à 16:37

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#37 Le 25/04/2020, à 16:45

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#38 Le 25/04/2020, à 16:45

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#39 Le 25/04/2020, à 16:45

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#40 Le 25/04/2020, à 16:48

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#41 Le 25/04/2020, à 16:49

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#42 Le 25/04/2020, à 17:04

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#43 Le 25/04/2020, à 17:35

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#44 Le 25/04/2020, à 21:05

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#45 Le 28/04/2020, à 20:08

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#46 Le 28/04/2020, à 20:13

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

#47 Le 28/04/2020, à 22:34

Re : [Résolu] connexion filaire et wifi qui disparait à chaque démarage

Pied de page des forums