#1 Le 26/05/2020, à 11:38
- tomvt
Démarrage lent Ubuntu sur SSD externe
Salut,
J'ai un vieux PC (Intel Pentium2x~2Ghz , 4go de Ram) qui a Ubuntu 18.04 sur le HDD interne , il met ~1min 40 a s'allumer et la commande
systemd-analyse time sort le meme temps
Ecran rose de chargement Ubuntu etc
J'ai acheter un SSD T5 de 500 go portable , j'ai mis Ubuntu 20.04 dessus et la quand je boot dessus 2min20 au demarrage dont facile 1m40 d'écran noir au debut
systemd-analyze time
Startup finished in 7.215s (kernel) + 18.056s (userspace) = 25.272s
graphical.target reached after 18.004s in userspaceLe pc me dit que ça a pris que 25 secondes , que ce passe t'il donc ?
En résumé j'ai sur un Aspire 7741ZG:
-Ubuntu 18.04 sur HDD interne
-Ubuntu 20.04 sur SSD portable
Le problème ce produit qu'en bootant sur le SSD avec et sans le HDD sur le PC
Le problème ne ce produit pas sur un autre PC
Dernière modification par tomvt (Le 27/05/2020, à 14:04)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#2 Le 26/05/2020, à 11:49
- michel_04
Re : Démarrage lent Ubuntu sur SSD externe
Bonjour.
tomvt a écrit :
J'ai un vieux PC (Intel Pentium2x~2Ghz , 4go de Ram) qui a Ubuntu 18.04 sur le HDD interne , il met ~1min 40 a s'allumer et la commande
systemd-analyse timesort le meme temps
Ecran rose de chargement Ubuntu etc
J'ai acheter un SSD T5 de 500 go portable , j'ai mis Ubuntu 20.04 dessus et la 2min20 au demarrage dont facile 1m40 d'écran noir au debut
et la quand je boot desussystemd-analyze time Startup finished in 7.215s (kernel) + 18.056s (userspace) = 25.272s graphical.target reached after 18.004s in userspaceLe pc me dit que ça a pris que 25 secondes , que ce passe t'il donc ?
Donne les retours complets stp.
michel@Michel-T450:~$ systemd-analyze time
Startup finished in 4.233s (kernel) + 3.452s (userspace) = 7.685s
graphical.target reached after 2.991s in userspacemichel@Michel-T450:~$ systemd-analyze blame
8.414s apt-daily.service
1.473s fwupd-refresh.service
1.276s man-db.service
1.162s systemd-logind.service
1.084s dev-sda1.device
772ms upower.service
756ms blueman-mechanism.service
734ms systemd-resolved.service
653ms lightdm.service
640ms plymouth-quit-wait.service
495ms udisks2.service
479ms systemd-journald.service
471ms fwupd.service
466ms apt-daily-upgrade.service
449ms tlp.service
448ms accounts-daemon.service
425ms logrotate.service
347ms e2scrub_reap.service
325ms networkd-dispatcher.service
315ms avahi-daemon.service
288ms NetworkManager.service
267ms polkit.service
244ms systemd-journal-flush.service
227ms apport.service
219ms ufw.service
192ms grub-common.service
182ms thermald.service
180ms wpa_supplicant.service
178ms alsa-restore.service
172ms virtualbox.service
158ms smartmontools.service
153ms grub-initrd-fallback.service
142ms lm-sensors.service
138ms hddtemp.service
131ms ModemManager.service
127ms gpu-manager.service
126ms rsyslog.service
121ms systemd-udev-trigger.service
119ms kerneloops.service
108ms systemd-udevd.service
104ms apparmor.service
104ms user@1000.service
102ms keyboard-setup.service
95ms geoclue.service
94ms ssh.service
87ms systemd-modules-load.service
83ms pppd-dns.service
80ms openvpn.service
60ms systemd-user-sessions.service
58ms vboxweb.service
56ms ntp.service
45ms colord.service
40ms systemd-tmpfiles-setup.service
37ms qemu-kvm.service
33ms systemd-fsck@dev-disk-by\x2duuid-ebaea3f7\x2d8046\x2d4ec4\x2daf28\x2d5ed51b76179b.service
29ms systemd-sysctl.service
27ms binfmt-support.service
22ms bluetooth.service
21ms systemd-sysusers.service
17ms user-runtime-dir@1000.service
16ms systemd-tmpfiles-setup-dev.service
16ms plymouth-start.service
15ms systemd-random-seed.service
15ms plymouth-read-write.service
13ms dev-hugepages.mount
13ms dev-mqueue.mount
12ms sys-kernel-debug.mount
11ms systemd-remount-fs.service
11ms sys-kernel-tracing.mount
11ms home.mount
10ms systemd-update-utmp.service
8ms proc-sys-fs-binfmt_misc.mount
8ms systemd-tmpfiles-clean.service
8ms rtkit-daemon.service
8ms systemd-backlight@backlight:intel_backlight.service
8ms kmod-static-nodes.service
8ms systemd-update-utmp-runlevel.service
7ms systemd-backlight@leds:tpacpi::kbd_backlight.service
7ms console-setup.service
6ms sys-kernel-config.mount
5ms setvtrgb.service
4ms sys-fs-fuse-connections.mount
lines 54-82/82 (END)A+
Dernière modification par michel_04 (Le 26/05/2020, à 11:50)
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#3 Le 26/05/2020, à 12:49
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Voila :
$ systemd-analyze blame
10.626s plymouth-quit-wait.service
7.564s NetworkManager-wait-online.service
3.469s dev-sdb5.device
2.482s udisks2.service
2.385s snapd.service
2.288s dev-loop1.device
2.252s networkd-dispatcher.service
1.944s dev-loop2.device
1.835s accounts-daemon.service
1.715s dev-loop3.device
1.702s dev-loop4.device
1.596s NetworkManager.service
1.494s systemd-resolved.service
1.447s avahi-daemon.service
1.422s polkit.service
1.284s switcheroo-control.service
1.210s thermald.service
1.202s wpa_supplicant.service
1.193s systemd-logind.service
1.041s dev-loop0.device
910ms systemd-timesyncd.service
849ms systemd-rfkill.service
819ms systemd-journald.service
791ms upower.service
728ms gpu-manager.service
617ms apport.service
607ms rsyslog.service
571ms grub-common.service
569ms ModemManager.service
564ms grub-initrd-fallback.service
539ms systemd-journal-flush.service
408ms e2scrub_reap.service
396ms user@1000.service
394ms systemd-udev-trigger.service
355ms keyboard-setup.service
348ms apparmor.service
323ms swapfile.swap
315ms systemd-udevd.service
278ms gdm.service
186ms systemd-modules-load.service
148ms systemd-fsck@dev-disk-by\x2duuid-3C0D\x2d07C7.service
138ms snapd.apparmor.service
126ms systemd-tmpfiles-setup.service
125ms snapd.seeded.service
113ms snap-gtk\x2dcommon\x2dthemes-1506.mount
111ms colord.service
104ms pppd-dns.service
99ms modprobe@drm.service
99ms systemd-tmpfiles-clean.service
98ms snap-snapd-7264.mount
94ms snap-core18-1705.mount
89ms snap-gnome\x2d3\x2d34\x2d1804-24.mount
89ms snap-snap\x2dstore-433.mount
79ms systemd-sysctl.service
77ms systemd-random-seed.service
59ms systemd-sysusers.service
59ms ufw.service
55ms dev-hugepages.mount
54ms dev-mqueue.mount
54ms systemd-remount-fs.service
53ms sys-kernel-tracing.mount
52ms sys-kernel-debug.mount
52ms kerneloops.service
44ms plymouth-read-write.service
43ms user-runtime-dir@1000.service
41ms sys-fs-fuse-connections.mount
38ms kmod-static-nodes.service
35ms plymouth-start.service
33ms systemd-tmpfiles-setup-dev.service
31ms systemd-user-sessions.service
30ms systemd-backlight@backlight:radeon_bl0.service
28ms systemd-backlight@backlight:acpi_video0.service
27ms console-setup.service
27ms openvpn.service
24ms sys-kernel-config.mount
23ms alsa-restore.service
21ms setvtrgb.service
21ms boot-efi.mount
18ms systemd-update-utmp-runlevel.service
16ms systemd-update-utmp.service
16ms rtkit-daemon.service
3ms snapd.socket
912us clean-mount-point@media-genie-41103d9b\x2d5459\x2d43c3\x2d8d60\x2d73a8dcc9d21d.serviceDernière modification par tomvt (Le 26/05/2020, à 13:05)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#4 Le 26/05/2020, à 13:10
- deleveau
Re : Démarrage lent Ubuntu sur SSD externe
bonjour
même si tu a installé Ubuntu sur un ssd externe , je suppose qu'il est branché sur un port usb2 dont le débit reste limité pour démarrer un os.
Hors ligne
#5 Le 26/05/2020, à 14:06
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
deleveau a écrit :
bonjour
même si tu a installé Ubuntu sur un ssd externe , je suppose qu'il est branché sur un port usb2 dont le débit reste limité pour démarrer un os.
Toute a fait je pourrais tester dans la soirée sur une grosse machine i7 avec du USB3.0 , mais ça n'explique pas l'ecran noir de 1min40 au début que l'OS ne prends pas en compte dans le calcul du temps de démarrage
(il n y a pas d'écran noir quand je boot sur le HDD fixe)
Dernière modification par tomvt (Le 26/05/2020, à 14:38)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#6 Le 27/05/2020, à 07:12
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
j'ai essayé sur un pc plus puissant où le démarrage c'est fait en 7 secondes tout comme l'idique le systeme.
Donc le probleme vient apparemment du vieux PC , mais ce que je n'arrive pas a comprendre c'est que quand je boot sur la clé d'installation ça part direct sur le fond violet de chargement et le temps donné par le systeme est le bon alors que quand je boot sur le SSD l'ecran de chargement met 1min40 a arrivé et ce temps n'est pas compté dans le temps du démarrage 
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#7 Le 27/05/2020, à 08:25
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Bonjour,
Dans ce post de toi, on peut voir que ton modèle d'ordi est de la famille Aspire 7741 du fabricant Acer : https://forum.ubuntu-fr.org/viewtopic.p … #p21678523
tomvt a écrit :
quand je boot sur la clé d'installation ça part direct sur le fond violet de chargement et le temps donné par le systeme est le bon alors que quand je boot sur le SSD l'ecran de chargement met 1min40 a arriver
Je te prie de démarrer sur cette clé d'installation en session live (choix "Essayer Ubuntu"), de faire un Boot-info depuis cette session live et de donner l'URL de ce Boot-info dans ta réponse.
Toujours depuis une session live, je te prie de tester le disque dur interne en suivant ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280
Dernière modification par malbo (Le 27/05/2020, à 08:26)
Hors ligne
#8 Le 27/05/2020, à 09:03
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
quel fin limier !
voici mon boot info :
boot-info-4ppa124 [20200527_0800]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.4 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdb: ___________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/FD/sdb: /dev/sdb déjà monté ou point de montage actif.
================================ 2 OS detected =================================
OS#1: Ubuntu 18.04.4 LTS on sda1
OS#2: Ubuntu 20.04 LTS on sdc5
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04 LTS, focal, x86_64)
===================================== UEFI =====================================
This live-session is not in EFI-mode.
f7a57b08bc7c1c85417ae4cea582d1d4 sdb2/boot/bootx64.efi
109e2fc4aa9786cd887ed6f95c485951 sdb2/boot/grubx64.efi
4487628005555bfd4a4c0a47211e0700 sdb2/boot/mmx64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : notGPT, no-BIOSboot, has---ESP, usb-disk, not-mmc, no-os, 0 sectors * 512 bytes
sdc : notGPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sda3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdc1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdc3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc5 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, not-far
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc5 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda3 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdb2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdb3 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdc1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
sdc3 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
sdc5 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdc
fdisk -l (filtered): ___________________________________________________________
Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x00072660
Boot Start End Sectors Size Id Type
sda1 * 2048 554080255 554078208 264.2G 83 Linux
sda2 968671230 976771071 8099842 3.9G 5 Extended
sda3 554080256 751425535 197345280 94.1G 83 Linux
sda5 968671232 976771071 8099840 3.9G 82 Linux swap / Solaris
Partition table entries are not in disk order.
Disk sdb: 15.24 GiB, 16357785600 bytes, 31948800 sectors
Disk identifier: 0x15f006ae
Boot Start End Sectors Size Id Type
sdb1 * 0 5303231 5303232 2.5G 0 Empty
sdb2 4222640 4230575 7936 3.9M ef EFI (FAT-12/16/32)
sdb3 5304320 31948799 26644480 12.7G 83 Linux
Disk sdc: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x15d1a44b
Boot Start End Sectors Size Id Type
sdc1 * 65535 1048559 983025 480M b W95 FAT32
sdc2 107446272 123095039 15648768 7.5G 82 Linux swap / Solaris
sdc3 123095040 976773119 853678080 407.1G 83 Linux
sdc4 1114093 107411864 106297772 50.7G 5 Extended
sdc5 1114095 107411864 106297770 50.7G 83 Linux
Partition table entries are not in disk order.
parted -lm (filtered): _________________________________________________________
sda:500GB:scsi:512:512:msdos:ATA WDC WD5000BEVT-2:;
1:1049kB:284GB:284GB:ext4::boot;
3:284GB:385GB:101GB:ext4::;
2:496GB:500GB:4147MB:::;
5:496GB:500GB:4147MB:linux-swap(v1)::;
sdb:16.4GB:scsi:512:512:unknown:SMI USB DISK:;
sdc:500GB:scsi:512:512:msdos:Samsung Portable SSD T5:;
1:33.6MB:537MB:503MB:fat32::boot;
4:570MB:55.0GB:54.4GB:::;
5:570MB:55.0GB:54.4GB:ext4::;
2:55.0GB:63.0GB:8012MB:linux-swap(v1)::;
3:63.0GB:500GB:437GB:ext4::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ext4 25200507-d84a-4939-9762-1449f92db754 00072660-01
├─sda2 00072660-02
├─sda3 ext4 9ea52f6c-d6fd-4e55-bca1-968828053e34 00072660-03
└─sda5 swap 2d3f6c51-1286-432d-ad26-97bde201dee9 00072660-05
sdb iso9660 2020-04-23-07-51-42-00 Ubuntu 20.04 LTS amd64
├─sdb1 iso9660 2020-04-23-07-51-42-00 15f006ae-01 Ubuntu 20.04 LTS amd64
├─sdb2 vfat 1AC3-20ED 15f006ae-02
└─sdb3 ext4 85fbaade-e44d-4b6e-a8f2-1cb6bf6e158e 15f006ae-03 writable
sdc
├─sdc1 vfat 3C0D-07C7 15d1a44b-01
├─sdc2 swap 9d36d52a-1c19-4819-b1db-bdbe86581abf 15d1a44b-02
├─sdc3 ext4 41103d9b-5459-43c3-8d60-73a8dcc9d21d 15d1a44b-03
├─sdc4 15d1a44b-04
└─sdc5 ext4 8e3c8d7c-4988-42ca-9665-11be108732bf 15d1a44b-05
df (filtered): _________________________________________________________________
Avail Use% Mounted on
disk/by-label/writable[/install-logs-2020-05-27.0/crash] 11.8G 0% /var/crash
disk/by-label/writable[/install-logs-2020-05-27.0/log] 11.8G 0% /var/log
sda1 201.6G 17% /mnt/boot-sav/sda1
sda3 87.4G 0% /mnt/boot-sav/sda3
sdb1 0 100% /cdrom
sdb2 10K 100% /mnt/boot-sav/sdb2
sdc1 479M 0% /media/ubuntu/3C0D-07C7
sdc3 379.2G 0% /media/ubuntu/41103d9b-5459-43c3-8d60-73a8dcc9d21d
sdc5 39.1G 16% /media/ubuntu/8e3c8d7c-4988-42ca-9665-11be108732bf
Mount options: __________________________________________________________________
disk/by-label/writable[/install-logs-2020-05-27.0/crash] rw,relatime
disk/by-label/writable[/install-logs-2020-05-27.0/log] rw,relatime
sda1 rw,relatime
sda3 rw,relatime
sdb1 ro,noatime,nojoliet,check=s,map=n,blocksize=2048
sdb2 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sdc1 rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro
sdc3 rw,nosuid,nodev,relatime,stripe=8191
sdc5 rw,nosuid,nodev,relatime,stripe=8191
====================== sda1/boot/grub/grub.cfg (filtered) ======================
Ubuntu 25200507-d84a-4939-9762-1449f92db754
Ubuntu, avec Linux 5.3.0-53-generic 25200507-d84a-4939-9762-1449f92db754
Ubuntu, avec Linux 5.3.0-40-generic 25200507-d84a-4939-9762-1449f92db754
Ubuntu, avec Linux 5.3.0-28-generic 25200507-d84a-4939-9762-1449f92db754
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=25200507-d84a-4939-9762-1449f92db754 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
======================= sda1/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
260,126251221 = 279,308435456 boot/grub/grub.cfg 2
134,136734009 = 144,028221440 boot/grub/i386-pc/core.img 1
44,782932281 = 48,085307392 boot/vmlinuz-5.3.0-28-generic 1
9,407924652 = 10,101682176 boot/vmlinuz-5.3.0-40-generic 2
62,564189911 = 67,177787392 boot/vmlinuz-5.3.0-53-generic 1
62,564189911 = 67,177787392 vmlinuz 1
9,407924652 = 10,101682176 vmlinuz.old 2
61,258270264 = 65,775566848 boot/initrd.img-5.3.0-28-generic 2
61,205600739 = 65,719013376 boot/initrd.img-5.3.0-40-generic 1
65,695842743 = 70,540374016 boot/initrd.img-5.3.0-53-generic 4
65,695842743 = 70,540374016 initrd.img 4
61,205600739 = 65,719013376 initrd.img.old 1
===================== sda1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12693 mars 18 2019 10_linux
-rwxr-xr-x 1 root root 11298 mars 18 2019 20_linux_xen
-rwxr-xr-x 1 root root 12059 mars 18 2019 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 18 2019 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 18 2019 40_custom
-rwxr-xr-x 1 root root 216 mars 18 2019 41_custom
====================== sdc5/boot/grub/grub.cfg (filtered) ======================
Ubuntu 8e3c8d7c-4988-42ca-9665-11be108732bf
Ubuntu, avec Linux 5.4.0-31-generic 8e3c8d7c-4988-42ca-9665-11be108732bf
Ubuntu, avec Linux 5.4.0-26-generic 8e3c8d7c-4988-42ca-9665-11be108732bf
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sdc5/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=8e3c8d7c-4988-42ca-9665-11be108732bf / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=3C0D-07C7 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
======================= sdc5/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdc5: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
16,688315868 = 17,918942720 boot/grub/grub.cfg 2
40,810721874 = 43,820178944 boot/grub/i386-pc/core.img 1
7,768664837 = 8,341540352 boot/vmlinuz 1
5,078113079 = 5,452582400 boot/vmlinuz-5.4.0-26-generic 2
7,768664837 = 8,341540352 boot/vmlinuz-5.4.0-31-generic 1
5,078113079 = 5,452582400 boot/vmlinuz.old 2
8,060855389 = 8,655277568 boot/initrd.img 3
8,053859234 = 8,647765504 boot/initrd.img-5.4.0-26-generic 2
8,060855389 = 8,655277568 boot/initrd.img-5.4.0-31-generic 3
8,053859234 = 8,647765504 boot/initrd.img.old 2
===================== sdc5: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17123 avril 15 11:31 10_linux
-rwxr-xr-x 1 root root 42128 avril 15 11:31 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15 11:31 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15 11:31 30_os-prober
-rwxr-xr-x 1 root root 1424 avril 15 11:31 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 15 11:31 40_custom
-rwxr-xr-x 1 root root 216 avril 15 11:31 41_custom
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown BootLoader on sdb
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f3 06 b4 42 eb 15 eb 02 |...t.f.....B....|
00000070 31 c9 5a 51 b4 08 cd 13 5b 0f b6 c6 40 50 83 e1 |1.ZQ....[...@P..|
00000080 3f 51 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 |?Q..SRP..|...f..|
00000090 07 e8 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 |..D.....f@.....f|
000000a0 81 3e 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 |.>@|..xpu....{.D|
000000b0 7c 00 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 ||.....isolinux.b|
000000c0 69 6e 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f |in missing or co|
000000d0 72 72 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 |rrupt...f`f1.f..|
000000e0 f8 7b 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a |.{f...{fRfP.Sj.j|
000000f0 10 89 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 |...f.6.{........|
00000100 f6 36 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b |.6.{....A......{|
00000110 cd 13 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 |...d.fa....Opera|
00000120 74 69 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 |ting system load|
00000130 20 65 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 | error...^....>b|
00000140 04 b3 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 |.....<.u........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 c4 20 40 00 00 00 00 00 ae 06 f0 15 00 00 80 00 |. @.............|
000001c0 01 00 00 a1 e0 fe 00 00 00 00 c0 eb 50 00 00 fe |............P...|
000001d0 ff ff ef fe ff ff b0 6e 40 00 00 1f 00 00 00 2d |.......n@......-|
000001e0 64 4a 83 b7 f3 c4 00 f0 50 00 00 90 96 01 00 00 |dJ......P.......|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi-amd64-signed of
sda1,
using the following options: sdc1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Blockers in case of suggested repair: __________________________________________
The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. This will enable this feature.
Confirmation request before suggested repair: __________________________________
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to EFI mode.
Are you sure you want to continue anyway?
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Ubuntu 18.04.4 LTS entry (sdc1/efi/****/shim****.efi (**** will be updated in the final message) file) !
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.Ayant plusieurs ordi le but serait de pouvoir passer d'un post a l'autre facilement avec le SSD sans avoir a mettre Grub sur chaque PC en mettant juste le port USB prioritaire sur le HDD dans le bios de chaque
Dernière modification par tomvt (Le 27/05/2020, à 09:21)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#9 Le 27/05/2020, à 09:26
- LukePerp
Re : Démarrage lent Ubuntu sur SSD externe
Après avoir démarré Ubuntu, peux tu nous donner le retour de :
dmesg Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Ethereum user
Hors ligne
#10 Le 27/05/2020, à 09:47
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
LukePerp a écrit :
Après avoir démarré Ubuntu, peux tu nous donner le retour de :
dmesg
pas de problème , bon appétit xD
[ 0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08
[ 0.000000] Linux version 5.4.0-31-generic (buildd@lgw01-amd64-059) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #35-Ubuntu SMP Thu May 7 20:20:34 UTC 2020 (Ubuntu 5.4.0-31.35-generic 5.4.34)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=8e3c8d7c-4988-42ca-9665-11be108732bf ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf3e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3e4000-0x00000000bf40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf46ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf470000-0x00000000bf4f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4f1000-0x00000000bf70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf717fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf718000-0x00000000bf71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf77dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf77e000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7df000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f060a000-0x00000000f060afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 7741 /Aspire 7741 , BIOS V1.09 05/03/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.061 MHz processor
[ 0.006352] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006355] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.006369] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.006375] MTRR default type: uncachable
[ 0.006376] MTRR fixed ranges enabled:
[ 0.006378] 00000-9FFFF write-back
[ 0.006379] A0000-BFFFF uncachable
[ 0.006380] C0000-D3FFF write-protect
[ 0.006382] D4000-DFFFF uncachable
[ 0.006383] E0000-FFFFF write-through
[ 0.006384] MTRR variable ranges enabled:
[ 0.006384] 0 disabled
[ 0.006386] 1 base 000000000 mask F80000000 write-back
[ 0.006388] 2 base 080000000 mask FC0000000 write-back
[ 0.006389] 3 base 100000000 mask FC0000000 write-back
[ 0.006390] 4 base 138000000 mask FF8000000 uncachable
[ 0.006391] 5 disabled
[ 0.006392] 6 disabled
[ 0.006393] 7 disabled
[ 0.007118] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.007302] total RAM covered: 3968M
[ 0.008323] Found optimal setting for mtrr clean up
[ 0.008325] gran_size: 64K chunk_size: 256M num_reg: 4 lose cover RAM: 0G
[ 0.008907] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.008914] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.018116] found SMP MP-table at [mem 0x000f6c30-0x000f6c3f]
[ 0.026246] check: Scanning 1 areas for low memory corruption
[ 0.026255] BRK [0x81601000, 0x81601fff] PGTABLE
[ 0.026258] BRK [0x81602000, 0x81602fff] PGTABLE
[ 0.026260] BRK [0x81603000, 0x81603fff] PGTABLE
[ 0.026393] BRK [0x81604000, 0x81604fff] PGTABLE
[ 0.026395] BRK [0x81605000, 0x81605fff] PGTABLE
[ 0.027259] BRK [0x81606000, 0x81606fff] PGTABLE
[ 0.027429] BRK [0x81607000, 0x81607fff] PGTABLE
[ 0.027872] RAMDISK: [mem 0x3219b000-0x350c4fff]
[ 0.027885] ACPI: Early table checksum verification disabled
[ 0.027891] ACPI: RSDP 0x00000000000F6AC0 000024 (v02 PTLTD )
[ 0.027896] ACPI: XSDT 0x00000000BF7F181D 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.027906] ACPI: FACP 0x00000000BF7E1000 0000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.027915] ACPI: DSDT 0x00000000BF7E2000 00D36D (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.027920] ACPI: FACS 0x00000000BF79AFC0 000040
[ 0.027924] ACPI: FACS 0x00000000BF79AFC0 000040
[ 0.027928] ACPI: HPET 0x00000000BF7FED86 000038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.027933] ACPI: MCFG 0x00000000BF7FEDBE 00003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.027938] ACPI: SLIC 0x00000000BF7FEDFA 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.027943] ACPI: APIC 0x00000000BF7FEF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.027948] ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.027953] ACPI: SSDT 0x00000000BF7E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.027969] ACPI: Local APIC address 0xfee00000
[ 0.028120] No NUMA configuration found
[ 0.028121] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.028137] NODE_DATA(0) allocated [mem 0x137fd2000-0x137ffcfff]
[ 0.028577] Zone ranges:
[ 0.028578] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.028579] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.028581] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.028582] Device empty
[ 0.028583] Movable zone start for each node
[ 0.028588] Early memory node ranges
[ 0.028589] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.028590] node 0: [mem 0x0000000000100000-0x00000000bf27bfff]
[ 0.028592] node 0: [mem 0x00000000bf282000-0x00000000bf3e3fff]
[ 0.028593] node 0: [mem 0x00000000bf40f000-0x00000000bf46efff]
[ 0.028594] node 0: [mem 0x00000000bf70f000-0x00000000bf717fff]
[ 0.028595] node 0: [mem 0x00000000bf71f000-0x00000000bf77dfff]
[ 0.028596] node 0: [mem 0x00000000bf79f000-0x00000000bf7defff]
[ 0.028597] node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[ 0.028598] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.028645] Zeroed struct page in unavailable ranges: 2942 pages
[ 0.028647] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.028649] On node 0 totalpages: 1012866
[ 0.028651] DMA zone: 64 pages used for memmap
[ 0.028652] DMA zone: 21 pages reserved
[ 0.028653] DMA zone: 3995 pages, LIFO batch:0
[ 0.028746] DMA32 zone: 12180 pages used for memmap
[ 0.028747] DMA32 zone: 779495 pages, LIFO batch:63
[ 0.048516] Normal zone: 3584 pages used for memmap
[ 0.048519] Normal zone: 229376 pages, LIFO batch:63
[ 0.053734] ACPI: PM-Timer IO Port: 0x408
[ 0.053738] ACPI: Local APIC address 0xfee00000
[ 0.053750] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.053751] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.053764] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.053767] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.053770] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.053772] ACPI: IRQ0 used by override.
[ 0.053773] ACPI: IRQ9 used by override.
[ 0.053777] Using ACPI (MADT) for SMP configuration information
[ 0.053779] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.053787] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.053839] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.053842] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.053843] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.053843] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.053844] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.053845] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.053846] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.053849] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
[ 0.053852] PM: Registered nosave memory: [mem 0xbf3e4000-0xbf40efff]
[ 0.053855] PM: Registered nosave memory: [mem 0xbf46f000-0xbf46ffff]
[ 0.053855] PM: Registered nosave memory: [mem 0xbf470000-0xbf4f0fff]
[ 0.053856] PM: Registered nosave memory: [mem 0xbf4f1000-0xbf70efff]
[ 0.053859] PM: Registered nosave memory: [mem 0xbf718000-0xbf71efff]
[ 0.053862] PM: Registered nosave memory: [mem 0xbf77e000-0xbf79efff]
[ 0.053865] PM: Registered nosave memory: [mem 0xbf7df000-0xbf7fefff]
[ 0.053868] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.053869] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.053870] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.053871] PM: Registered nosave memory: [mem 0xf0000000-0xf0609fff]
[ 0.053872] PM: Registered nosave memory: [mem 0xf060a000-0xf060afff]
[ 0.053872] PM: Registered nosave memory: [mem 0xf060b000-0xfeafefff]
[ 0.053873] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.053874] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.053875] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.053876] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.053877] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.053878] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.053878] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.053879] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.053880] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.053881] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.053884] [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.053885] Booting paravirtualized kernel on bare hardware
[ 0.053889] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.053901] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.054290] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
[ 0.054303] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
[ 0.054304] pcpu-alloc: [0] 0 1
[ 0.054360] Built 1 zonelists, mobility grouping on. Total pages: 997017
[ 0.054361] Policy zone: Normal
[ 0.054364] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=8e3c8d7c-4988-42ca-9665-11be108732bf ro quiet splash
[ 0.055134] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.055458] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.055512] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.065477] Calgary: detecting Calgary via BIOS EBDA area
[ 0.065481] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.083875] Memory: 3834040K/4051464K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 217424K reserved, 0K cma-reserved)
[ 0.083885] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.084134] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.084156] Kernel/User page tables isolation: enabled
[ 0.084179] ftrace: allocating 44484 entries in 174 pages
[ 0.112217] rcu: Hierarchical RCU implementation.
[ 0.112221] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.112222] Tasks RCU enabled.
[ 0.112223] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.112224] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.117727] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.120017] Console: colour VGA+ 80x25
[ 0.120025] printk: console [tty0] enabled
[ 0.120051] ACPI: Core revision 20190816
[ 0.120200] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.120216] APIC: Switch to symmetric I/O mode setup
[ 0.120722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.140215] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35ae5913d44, max_idle_ns: 881590531028 ns
[ 0.140222] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.12 BogoMIPS (lpj=7448244)
[ 0.140225] pid_max: default: 32768 minimum: 301
[ 0.140273] LSM: Security Framework initializing
[ 0.140290] Yama: becoming mindful.
[ 0.140324] AppArmor: AppArmor initialized
[ 0.140384] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.140398] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.140423] *** VALIDATE tmpfs ***
[ 0.140659] *** VALIDATE proc ***
[ 0.140738] *** VALIDATE cgroup1 ***
[ 0.140740] *** VALIDATE cgroup2 ***
[ 0.140806] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.140817] process: using mwait in idle threads
[ 0.140822] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.140823] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.140827] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.140829] Spectre V2 : Mitigation: Full generic retpoline
[ 0.140829] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.140830] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.140832] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.140834] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.140838] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.141051] Freeing SMP alternatives memory: 40K
[ 0.252415] smpboot: CPU0: Intel(R) Pentium(R) CPU P6000 @ 1.87GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.252585] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.252594] core: CPUID marked event: 'bus cycles' unavailable
[ 0.252595] ... version: 3
[ 0.252596] ... bit width: 48
[ 0.252597] ... generic registers: 4
[ 0.252598] ... value mask: 0000ffffffffffff
[ 0.252599] ... max period: 000000007fffffff
[ 0.252600] ... fixed-purpose events: 3
[ 0.252600] ... event mask: 000000070000000f
[ 0.252655] rcu: Hierarchical SRCU implementation.
[ 0.253740] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.253799] smp: Bringing up secondary CPUs ...
[ 0.253982] x86: Booting SMP configuration:
[ 0.253984] .... node #0, CPUs: #1
[ 0.256311] smp: Brought up 1 node, 2 CPUs
[ 0.256311] smpboot: Max logical packages: 1
[ 0.256311] smpboot: Total of 2 processors activated (7448.24 BogoMIPS)
[ 0.257701] devtmpfs: initialized
[ 0.257701] x86/mm: Memory block size: 128MB
[ 0.260270] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[ 0.260285] PM: Registering ACPI NVS region [mem 0xbf77e000-0xbf79efff] (135168 bytes)
[ 0.260376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.260376] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.260376] pinctrl core: initialized pinctrl subsystem
[ 0.260501] PM: RTC time: 08:43:35, date: 2020-05-27
[ 0.260674] NET: Registered protocol family 16
[ 0.260805] audit: initializing netlink subsys (disabled)
[ 0.260819] audit: type=2000 audit(1590569015.140:1): state=initialized audit_enabled=0 res=1
[ 0.260819] EISA bus registered
[ 0.260819] cpuidle: using governor ladder
[ 0.260819] cpuidle: using governor menu
[ 0.260819] Simple Boot Flag at 0x3e set to 0x80
[ 0.260819] ACPI: bus type PCI registered
[ 0.260819] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.260819] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.260819] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.260819] PCI: Using configuration type 1 for base access
[ 0.264267] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264373] ACPI: Added _OSI(Module Device)
[ 0.264374] ACPI: Added _OSI(Processor Device)
[ 0.264376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.264377] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.264379] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.264380] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.264381] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.285676] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.288143] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.288937] ACPI: Dynamic OEM Table Load:
[ 0.288944] ACPI: SSDT 0xFFFF9688733DAC00 00032A (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.290422] ACPI: Dynamic OEM Table Load:
[ 0.290429] ACPI: SSDT 0xFFFF968873395000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.292413] ACPI: Dynamic OEM Table Load:
[ 0.292419] ACPI: SSDT 0xFFFF9688733DB800 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.293635] ACPI: Dynamic OEM Table Load:
[ 0.293640] ACPI: SSDT 0xFFFF96887280F200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.295017] ACPI: EC: EC started
[ 0.295018] ACPI: EC: interrupt blocked
[ 0.328898] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.328901] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.328903] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.328904] ACPI: Interpreter enabled
[ 0.328940] ACPI: (supports S0 S3 S4 S5)
[ 0.328942] ACPI: Using IOAPIC for interrupt routing
[ 0.328996] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.329391] ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.349388] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.349398] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.349485] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.350708] PCI host bridge to bus 0000:00
[ 0.350711] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.350713] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.350715] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.350717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.350718] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.350720] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.350722] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[ 0.350724] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.350738] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.350769] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.350925] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.350980] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.351174] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.351206] pci 0000:00:16.0: reg 0x10: [mem 0xf0604000-0xf060400f 64bit]
[ 0.351297] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.351459] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.351481] pci 0000:00:1a.0: reg 0x10: [mem 0xf0606000-0xf06063ff]
[ 0.351568] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.351742] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.351765] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit]
[ 0.351842] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.352013] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.352100] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.352281] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.352368] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.352559] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.352582] pci 0000:00:1d.0: reg 0x10: [mem 0xf0607000-0xf06073ff]
[ 0.352669] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.352841] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.353064] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.353333] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.353353] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 0.353361] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 0.353368] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 0.353376] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 0.353383] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 0.353391] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff]
[ 0.353436] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.353599] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.353619] pci 0000:00:1f.3: reg 0x10: [mem 0xf0609000-0xf06090ff 64bit]
[ 0.353639] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.353873] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[ 0.353893] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.353903] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
[ 0.353910] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.353923] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.353930] pci 0000:02:00.0: enabling Extended Tags
[ 0.353970] pci 0000:02:00.0: supports D1 D2
[ 0.353985] pci 0000:02:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
[ 0.354063] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 0.354083] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
[ 0.354116] pci 0000:02:00.1: enabling Extended Tags
[ 0.354156] pci 0000:02:00.1: supports D1 D2
[ 0.354235] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.354238] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.354241] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.354244] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.354355] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 0.354393] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.354457] pci 0000:03:00.0: enabling Extended Tags
[ 0.354551] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.354741] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.354745] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.354749] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.354754] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.354833] pci 0000:05:00.0: [168c:002a] type 00 class 0x028000
[ 0.354868] pci 0000:05:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
[ 0.355006] pci 0000:05:00.0: supports D1
[ 0.355008] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.355129] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.355142] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.355147] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.355168] pci_bus 0000:0f: extended config space not accessible
[ 0.355227] pci 0000:00:1e.0: PCI bridge to [bus 0f] (subtractive decode)
[ 0.355237] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.355238] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.355240] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.355242] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.355244] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.355245] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.355247] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[ 0.362240] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.362362] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.362482] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.362601] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.362719] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.362838] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.362958] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.363078] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.363187] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.363193] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.363348] PCI host bridge to bus 0000:ff
[ 0.363351] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.363361] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.363428] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.363519] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.363581] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.363642] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.363706] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.364225] ACPI: EC: interrupt unblocked
[ 0.364225] ACPI: EC: event unblocked
[ 0.364225] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.364225] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.364269] iommu: Default domain type: Translated
[ 0.364521] SCSI subsystem initialized
[ 0.364536] libata version 3.00 loaded.
[ 0.364536] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ 0.364536] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.364536] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.364536] vgaarb: loaded
[ 0.364536] ACPI: bus type USB registered
[ 0.364536] usbcore: registered new interface driver usbfs
[ 0.364536] usbcore: registered new interface driver hub
[ 0.364536] usbcore: registered new device driver usb
[ 0.364536] pps_core: LinuxPPS API ver. 1 registered
[ 0.364536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.364536] PTP clock support registered
[ 0.364536] EDAC MC: Ver: 3.0.0
[ 0.364536] PCI: Using ACPI for IRQ routing
[ 0.373015] PCI: pci_cache_line_size set to 64 bytes
[ 0.373095] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.373096] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.373099] e820: reserve RAM buffer [mem 0xbf3e4000-0xbfffffff]
[ 0.373101] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.373103] e820: reserve RAM buffer [mem 0xbf718000-0xbfffffff]
[ 0.373105] e820: reserve RAM buffer [mem 0xbf77e000-0xbfffffff]
[ 0.373106] e820: reserve RAM buffer [mem 0xbf7df000-0xbfffffff]
[ 0.373107] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.373270] NetLabel: Initializing
[ 0.373271] NetLabel: domain hash size = 128
[ 0.373271] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.373298] NetLabel: unlabeled traffic allowed by default
[ 0.373474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.373481] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.376266] clocksource: Switched to clocksource tsc-early
[ 0.398386] *** VALIDATE bpf ***
[ 0.398510] VFS: Disk quotas dquot_6.6.0
[ 0.398537] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.398581] *** VALIDATE ramfs ***
[ 0.398586] *** VALIDATE hugetlbfs ***
[ 0.398725] AppArmor: AppArmor Filesystem Enabled
[ 0.398775] pnp: PnP ACPI init
[ 0.399088] system 00:00: [io 0x0500-0x050f] has been reserved
[ 0.399091] system 00:00: [io 0xffff] has been reserved
[ 0.399093] system 00:00: [io 0xffff] has been reserved
[ 0.399095] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.399097] system 00:00: [io 0x1180-0x11ff] has been reserved
[ 0.399099] system 00:00: [io 0xfe00] has been reserved
[ 0.399108] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399198] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.399325] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.399362] pnp 00:03: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[ 0.400035] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.400037] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.400039] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.400041] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.400043] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.400046] system 00:04: [mem 0xf060a000-0xf060afff] has been reserved
[ 0.400048] system 00:04: [mem 0xc0000000-0xc0000fff] has been reserved
[ 0.400050] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.400052] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.400054] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.400056] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.400058] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.400065] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400326] pnp: PnP ACPI: found 5 devices
[ 0.402412] thermal_sys: Registered thermal governor 'fair_share'
[ 0.402413] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.402414] thermal_sys: Registered thermal governor 'step_wise'
[ 0.402415] thermal_sys: Registered thermal governor 'user_space'
[ 0.402416] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.406910] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.406970] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.406973] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.406988] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.406991] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.406995] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.406998] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.407002] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.407005] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.407008] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.407013] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.407015] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.407020] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.407023] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.407029] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.407031] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.407035] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.407039] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.407044] pci 0000:00:1e.0: PCI bridge to [bus 0f]
[ 0.407055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407057] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.407059] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.407060] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.407062] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.407064] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window]
[ 0.407065] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff window]
[ 0.407067] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.407069] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.407070] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.407072] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.407074] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.407075] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.407077] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.407079] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.407081] pci_bus 0000:05: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.407083] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407084] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff window]
[ 0.407086] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.407088] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.407089] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.407091] pci_bus 0000:0f: resource 9 [mem 0x000e0000-0x000e3fff window]
[ 0.407093] pci_bus 0000:0f: resource 10 [mem 0xc0000000-0xfeafffff window]
[ 0.407282] NET: Registered protocol family 2
[ 0.407545] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.407611] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.407819] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.408022] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.408086] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.408135] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.408223] NET: Registered protocol family 1
[ 0.408231] NET: Registered protocol family 44
[ 0.409100] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.409110] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
[ 0.409169] PCI: CLS 64 bytes, default 64
[ 0.409274] Trying to unpack rootfs image as initramfs...
[ 0.635681] Freeing initrd memory: 48296K
[ 0.635762] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.635765] software IO TLB: mapped [mem 0xbb27c000-0xbf27c000] (64MB)
[ 0.635947] check: Scanning for low memory corruption every 60 seconds
[ 0.636483] Initialise system trusted keyrings
[ 0.636499] Key type blacklist registered
[ 0.636571] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.638752] zbud: loaded
[ 0.639359] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.639599] fuse: init (API version 7.31)
[ 0.639625] *** VALIDATE fuse ***
[ 0.639628] *** VALIDATE fuse ***
[ 0.639772] Platform Keyring initialized
[ 0.647868] Key type asymmetric registered
[ 0.647870] Asymmetric key parser 'x509' registered
[ 0.647891] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.647962] io scheduler mq-deadline registered
[ 0.649110] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.649193] intel_idle: MWAIT substates: 0x120
[ 0.649195] intel_idle: v0.4.1 model 0x25
[ 0.649292] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.650966] ACPI: AC Adapter [ADP1] (on-line)
[ 0.651071] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.651122] ACPI: Lid Switch [LID0]
[ 0.651170] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.651208] ACPI: Sleep Button [SLPB]
[ 0.651255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.651289] ACPI: Power Button [PWRF]
[ 0.686970] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.686972] ACPI: Thermal Zone [TZS0] (63 C)
[ 0.702838] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.702840] ACPI: Thermal Zone [TZS1] (42 C)
[ 0.703025] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.721432] Linux agpgart interface v0.103
[ 0.726513] loop: module loaded
[ 0.726957] libphy: Fixed MDIO Bus: probed
[ 0.726958] tun: Universal TUN/TAP device driver, 1.6
[ 0.727145] PPP generic driver version 2.4.2
[ 0.727529] VFIO - User Level meta-driver version: 0.3
[ 0.727725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.727734] ehci-pci: EHCI PCI platform driver
[ 0.736064] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.736074] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.736088] ehci-pci 0000:00:1a.0: debug port 2
[ 0.740078] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.740103] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0606000
[ 0.755801] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.755934] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.755936] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755938] usb usb1: Product: EHCI Host Controller
[ 0.755940] usb usb1: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
[ 0.755941] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.756288] hub 1-0:1.0: USB hub found
[ 0.756309] hub 1-0:1.0: 3 ports detected
[ 0.756720] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.756727] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.756738] ehci-pci 0000:00:1d.0: debug port 2
[ 0.760710] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.760723] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0607000
[ 0.775805] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.775940] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.775942] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.775944] usb usb2: Product: EHCI Host Controller
[ 0.775945] usb usb2: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
[ 0.775947] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.776280] hub 2-0:1.0: USB hub found
[ 0.776303] hub 2-0:1.0: 3 ports detected
[ 0.776490] ehci-platform: EHCI generic platform driver
[ 0.776507] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.776511] ohci-pci: OHCI PCI platform driver
[ 0.776523] ohci-platform: OHCI generic platform driver
[ 0.776531] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.776613] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.806410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.806417] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.806798] mousedev: PS/2 mouse device common for all mice
[ 0.807804] rtc_cmos 00:01: RTC can wake from S4
[ 0.808260] rtc_cmos 00:01: registered as rtc0
[ 0.808300] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.808309] i2c /dev entries driver
[ 0.808374] device-mapper: uevent: version 1.0.3
[ 0.808483] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.808537] platform eisa.0: Probing EISA bus 0
[ 0.808542] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.808546] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.808549] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.808552] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.808555] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.808558] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.808561] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.808564] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.808567] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.808570] platform eisa.0: EISA: Detected 0 cards
[ 0.808576] intel_pstate: CPU model not supported
[ 0.808670] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.808821] drop_monitor: Initializing network drop monitor service
[ 0.809086] NET: Registered protocol family 10
[ 0.824580] Segment Routing with IPv6
[ 0.824650] NET: Registered protocol family 17
[ 0.824793] Key type dns_resolver registered
[ 0.825255] RAS: Correctable Errors collector initialized.
[ 0.825304] microcode: sig=0x20652, pf=0x10, revision=0x11
[ 0.825379] microcode: Microcode Update Driver: v2.2.
[ 0.825386] IPI shorthand broadcast: enabled
[ 0.825397] sched_clock: Marking stable (823198992, 2173892)->(834026387, -8653503)
[ 0.825582] registered taskstats version 1
[ 0.825595] Loading compiled-in X.509 certificates
[ 0.829400] Loaded X.509 cert 'Build time autogenerated kernel key: 0877109df09d880f03477498890f5473480a68b0'
[ 0.829440] zswap: loaded using pool lzo/zbud
[ 0.829607] Key type ._fscrypt registered
[ 0.829608] Key type .fscrypt registered
[ 0.838760] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.847027] Key type big_key registered
[ 0.855191] Key type encrypted registered
[ 0.855196] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.855205] ima: No TPM chip found, activating TPM-bypass!
[ 0.855214] ima: Allocated hash algorithm: sha1
[ 0.855225] ima: No architecture policies found
[ 0.855242] evm: Initialising EVM extended attributes:
[ 0.855244] evm: security.selinux
[ 0.855244] evm: security.SMACK64
[ 0.855245] evm: security.SMACK64EXEC
[ 0.855246] evm: security.SMACK64TRANSMUTE
[ 0.855246] evm: security.SMACK64MMAP
[ 0.855247] evm: security.apparmor
[ 0.855248] evm: security.ima
[ 0.855248] evm: security.capability
[ 0.855249] evm: HMAC attrs: 0x1
[ 0.855874] PM: Magic number: 4:554:726
[ 0.855892] block loop6: hash matches
[ 0.856059] rtc_cmos 00:01: setting system clock to 2020-05-27T08:43:35 UTC (1590569015)
[ 0.906055] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.907990] Freeing unused decrypted memory: 2040K
[ 0.908756] Freeing unused kernel image memory: 2712K
[ 0.908839] Write protecting the kernel read-only data: 22528k
[ 0.909667] Freeing unused kernel image memory: 2008K
[ 0.910100] Freeing unused kernel image memory: 1196K
[ 0.929265] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.929303] x86/mm: Checking user space page tables
[ 0.948154] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.948157] Run /init as init process
[ 1.078275] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 1.090080] random: fast init done
[ 1.090120] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.090140] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.090321] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.091770] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.100417] acpi device:02: registered as cooling_device2
[ 1.100517] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 1.111777] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.115929] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.117426] tg3.c:v3.137 (May 11, 2014)
[ 1.120322] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 1.120325] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.120555] hub 1-1:1.0: USB hub found
[ 1.120638] hub 1-1:1.0: 6 ports detected
[ 1.121034] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[ 1.121041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.121045] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[ 1.121050] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20190816/utaddress-204)
[ 1.121054] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.121055] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[ 1.121059] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20190816/utaddress-204)
[ 1.121063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.121064] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[ 1.121069] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20190816/utaddress-204)
[ 1.121072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.121073] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.124012] ahci 0000:00:1f.2: version 3.0
[ 1.124352] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.124374] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 1.124377] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.129114] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.140265] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 1.140268] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.140576] hub 2-1:1.0: USB hub found
[ 1.140653] hub 2-1:1.0: 8 ports detected
[ 1.143003] scsi host0: ahci
[ 1.143219] scsi host1: ahci
[ 1.143353] scsi host2: ahci
[ 1.143483] scsi host3: ahci
[ 1.143626] scsi host4: ahci
[ 1.143710] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 27
[ 1.143712] ata2: DUMMY
[ 1.143712] ata3: DUMMY
[ 1.143713] ata4: DUMMY
[ 1.143715] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 27
[ 1.146114] libphy: tg3 mdio bus: probed
[ 1.163620] Broadcom BCM57780 300:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01, irq=POLL)
[ 1.176952] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:a8:12:ce
[ 1.176955] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.176957] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.191910] tg3 0000:03:00.0 enp3s0: renamed from eth0
[ 1.432277] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[ 1.459736] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.461531] ata1.00: ATA-8: WDC WD5000BEVT-22A0RT0, 01.01A01, max UDMA/133
[ 1.461535] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.463404] ata1.00: configured for UDMA/133
[ 1.463761] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 1A01 PQ: 0 ANSI: 5
[ 1.464193] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.464209] sd 0:0:0:0: [sda] Write Protect is off
[ 1.464211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.464245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.464271] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.485154] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=61f5, bcdDevice= 1.00
[ 1.485160] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.485163] usb 2-1.2: Product: Portable SSD T5
[ 1.485166] usb 2-1.2: Manufacturer: Samsung
[ 1.485170] usb 2-1.2: SerialNumber: 12345680CFC8
[ 1.490390] usbcore: registered new interface driver usb-storage
[ 1.493705] scsi host5: uas
[ 1.493844] usbcore: registered new interface driver uas
[ 1.495431] scsi 5:0:0:0: Direct-Access Samsung Portable SSD T5 0 PQ: 0 ANSI: 6
[ 1.497180] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.499679] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.500150] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.500155] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1.500902] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501399] sd 5:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 1.518046] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 1.522873] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.564276] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.627126] usb 2-1.5: New USB device found, idVendor=064e, idProduct=a219, bcdDevice= 2.15
[ 1.627129] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.627131] usb 2-1.5: Product: 1.3M WebCam
[ 1.627133] usb 2-1.5: Manufacturer: Suyin
[ 1.627135] usb 2-1.5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[ 1.660273] tsc: Refined TSC clocksource calibration: 1861.999 MHz
[ 1.660285] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade44ba74, max_idle_ns: 881590729106 ns
[ 1.660310] clocksource: Switched to clocksource tsc
[ 1.779133] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.791947] ata5.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
[ 1.805761] ata5.00: configured for UDMA/100
[ 1.812590] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
[ 1.876569] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.876573] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.892614] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.892721] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.846301] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 5.220929] sda: sda1 sda2 < sda5 > sda3
[ 5.222166] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.522770] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.091126] systemd[1]: Inserted module 'autofs4'
[ 7.136323] systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 7.156455] systemd[1]: Detected architecture x86-64.
[ 7.174756] systemd[1]: Set hostname to <Portable>.
[ 7.577776] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 7.748755] systemd[1]: Created slice system-modprobe.slice.
[ 7.749165] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.749530] systemd[1]: Created slice User and Session Slice.
[ 7.749636] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.749984] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.750060] systemd[1]: Reached target User and Group Name Lookups.
[ 7.750086] systemd[1]: Reached target Remote File Systems.
[ 7.750104] systemd[1]: Reached target Slices.
[ 7.753602] systemd[1]: Listening on Syslog Socket.
[ 7.753768] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.753863] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.754191] systemd[1]: Listening on Journal Audit Socket.
[ 7.754347] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.754542] systemd[1]: Listening on Journal Socket.
[ 7.754724] systemd[1]: Listening on udev Control Socket.
[ 7.754857] systemd[1]: Listening on udev Kernel Socket.
[ 7.756451] systemd[1]: Mounting Huge Pages File System...
[ 7.757977] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.759654] systemd[1]: Mounting Kernel Debug File System...
[ 7.763635] systemd[1]: Mounting Kernel Trace File System...
[ 7.765971] systemd[1]: Starting Journal Service...
[ 7.767633] systemd[1]: Starting Set the console keyboard layout...
[ 7.769394] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 7.771301] systemd[1]: Starting Load Kernel Module drm...
[ 7.774423] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 7.774492] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 7.783701] systemd[1]: Starting Load Kernel Modules...
[ 7.785721] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.790081] systemd[1]: Starting udev Coldplug all Devices...
[ 7.791662] systemd[1]: Starting Uncomplicated firewall...
[ 7.800892] systemd[1]: Mounted Huge Pages File System.
[ 7.801128] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.801325] systemd[1]: Mounted Kernel Debug File System.
[ 7.801524] systemd[1]: Mounted Kernel Trace File System.
[ 7.803531] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 7.831244] systemd[1]: modprobe@drm.service: Succeeded.
[ 7.831762] systemd[1]: Finished Load Kernel Module drm.
[ 7.832659] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 7.836924] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.837805] systemd[1]: Finished Uncomplicated firewall.
[ 7.839331] systemd[1]: Activating swap /swapfile...
[ 7.849248] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 7.849352] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 7.850987] systemd[1]: Starting Load/Save Random Seed...
[ 7.852494] systemd[1]: Starting Create System Users...
[ 7.906748] lp: driver loaded but no devices found
[ 7.908456] systemd[1]: Finished Load/Save Random Seed.
[ 7.924749] systemd[1]: Finished Create System Users.
[ 7.926339] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.934542] ppdev: user-space parallel port driver
[ 7.942672] systemd[1]: Finished Load Kernel Modules.
[ 7.944515] systemd[1]: Mounting FUSE Control File System...
[ 7.946752] systemd[1]: Mounting Kernel Configuration File System...
[ 7.961457] systemd[1]: Starting Apply Kernel Variables...
[ 7.974387] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 7.974745] systemd[1]: Mounted FUSE Control File System.
[ 7.974967] systemd[1]: Mounted Kernel Configuration File System.
[ 7.988529] systemd[1]: Starting udev Kernel Device Manager...
[ 8.005074] systemd[1]: Finished Apply Kernel Variables.
[ 8.073824] systemd[1]: Finished Set the console keyboard layout.
[ 8.074046] systemd[1]: Reached target Local File Systems (Pre).
[ 8.083838] systemd[1]: Mounting Mount unit for core18, revision 1705...
[ 8.086058] systemd[1]: Mounting Mount unit for core18, revision 1754...
[ 8.092683] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 24...
[ 8.100425] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33...
[ 8.120537] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
[ 8.137375] systemd[1]: Mounting Mount unit for snap-store, revision 433...
[ 8.145449] systemd[1]: Mounting Mount unit for snap-store, revision 454...
[ 8.167815] systemd[1]: Mounting Mount unit for snapd, revision 7264...
[ 8.196396] systemd[1]: Mounted Mount unit for core18, revision 1705.
[ 8.196682] systemd[1]: Mounted Mount unit for core18, revision 1754.
[ 8.201740] systemd[1]: Mounted Mount unit for gnome-3-34-1804, revision 33.
[ 8.208406] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 8.209576] systemd[1]: Activated swap /swapfile.
[ 8.210031] systemd[1]: Reached target Swap.
[ 8.213949] systemd[1]: Mounted Mount unit for gnome-3-34-1804, revision 24.
[ 8.249213] systemd[1]: Mounted Mount unit for snap-store, revision 433.
[ 8.270506] systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1506.
[ 8.275082] systemd[1]: Mounted Mount unit for snap-store, revision 454.
[ 8.275295] systemd[1]: Mounted Mount unit for snapd, revision 7264.
[ 8.280440] systemd[1]: Started udev Kernel Device Manager.
[ 8.306459] systemd[1]: Finished udev Coldplug all Devices.
[ 8.308580] systemd[1]: Starting Show Plymouth Boot Screen...
[ 8.326472] systemd[1]: Received SIGRTMIN+20 from PID 365 (plymouthd).
[ 8.343933] systemd[1]: Started Show Plymouth Boot Screen.
[ 8.344327] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 8.344549] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 8.344645] systemd[1]: Reached target Local Encrypted Volumes.
[ 8.570252] systemd[1]: Started Journal Service.
[ 8.590788] systemd-journald[300]: Received client request to flush runtime journal.
[ 9.720126] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 9.720300] acer_wmi: Function bitmap for Communication Button: 0x1
[ 9.746199] input: Acer WMI hotkeys as /devices/virtual/input/input7
[ 9.876309] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.888577] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.051344] mc: Linux media interface: v0.10
[ 10.129656] videodev: Linux video capture interface: v2.00
[ 10.153853] [drm] radeon kernel modesetting enabled.
[ 10.153940] radeon 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[ 10.153942] radeon 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xcfee0000 -> 0xcfefffff
[ 10.153945] radeon 0000:02:00.0: vgaarb: deactivate vga console
[ 10.162304] Console: switching to colour dummy device 80x25
[ 10.168538] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1025:0x037E 0x00).
[ 10.168608] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d4000-0x000d7fff window]
[ 10.168614] caller pci_map_rom+0x71/0x18c mapping multiple BARs
[ 10.168650] ATOM BIOS: Acer
[ 10.168710] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 10.168712] radeon 0000:02:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 10.168718] [drm] Detected VRAM RAM=512M, BAR=256M
[ 10.168718] [drm] RAM width 64bits DDR
[ 10.175792] [TTM] Zone kernel: Available graphics memory: 1945166 KiB
[ 10.175796] [TTM] Initializing pool allocator
[ 10.175802] [TTM] Initializing DMA pool allocator
[ 10.175831] [drm] radeon: 512M of VRAM memory ready
[ 10.175832] [drm] radeon: 1024M of GTT memory ready.
[ 10.175848] [drm] Loading CEDAR Microcode
[ 10.203628] ath: phy0: Enable WAR for ASPM D3/L1
[ 10.333445] [drm] Internal thermal controller without fan control
[ 10.357436] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 10.388354] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ 10.388359] uvcvideo 2-1.5:1.0: Entity type for entity Processing 3 was not initialized!
[ 10.388361] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ 10.388459] input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[ 10.388558] usbcore: registered new interface driver uvcvideo
[ 10.388560] USB Video Class driver (1.1.1)
[ 10.638018] ath: EEPROM regdomain: 0x65
[ 10.638020] ath: EEPROM indicates we should expect a direct regpair map
[ 10.638023] ath: Country alpha2 being used: 00
[ 10.638023] ath: Regpair used: 0x65
[ 10.641653] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.642306] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffafbb80670000, irq=17
[ 10.652274] [drm] radeon: dpm initialized
[ 10.658167] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 10.685550] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 10.700214] radeon 0000:02:00.0: WB enabled
[ 10.700222] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x(____ptrval____)
[ 10.700253] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x(____ptrval____)
[ 10.700635] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(____ptrval____)
[ 10.704249] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.704251] [drm] Driver supports precise vblank timestamp query.
[ 10.704255] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[ 10.704620] radeon 0000:02:00.0: radeon: using MSI.
[ 10.704650] [drm] radeon: irq initialized.
[ 10.721758] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 10.724275] [drm] ring test on 0 succeeded in 1 usecs
[ 10.724284] [drm] ring test on 3 succeeded in 2 usecs
[ 10.728630] random: crng init done
[ 10.728632] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.738201] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
[ 10.793572] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input9
[ 10.804375] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.804379] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.804381] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.804383] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.804384] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.804387] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 10.804388] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 10.821016] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.821097] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.900581] [drm] ring test on 5 succeeded in 1 usecs
[ 10.900587] [drm] UVD initialized successfully.
[ 10.900980] [drm] ib test on ring 0 succeeded in 0 usecs
[ 10.901013] [drm] ib test on ring 3 succeeded in 0 usecs
[ 11.576329] [drm] ib test on ring 5 succeeded
[ 11.640402] [drm] radeon atom DIG backlight initialized
[ 11.640408] [drm] Radeon Display Connectors
[ 11.640410] [drm] Connector 0:
[ 11.640412] [drm] LVDS-1
[ 11.640414] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 11.640415] [drm] Encoders:
[ 11.640415] [drm] LCD1: INTERNAL_UNIPHY
[ 11.640416] [drm] Connector 1:
[ 11.640417] [drm] HDMI-A-1
[ 11.640418] [drm] HPD1
[ 11.640419] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 11.640420] [drm] Encoders:
[ 11.640421] [drm] DFP1: INTERNAL_UNIPHY1
[ 11.640421] [drm] Connector 2:
[ 11.640422] [drm] VGA-1
[ 11.640424] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 11.640424] [drm] Encoders:
[ 11.640425] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 11.725227] audit: type=1400 audit(1590569026.364:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=608 comm="apparmor_parser"
[ 11.742336] audit: type=1400 audit(1590569026.380:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=606 comm="apparmor_parser"
[ 11.742342] audit: type=1400 audit(1590569026.380:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=606 comm="apparmor_parser"
[ 11.742345] audit: type=1400 audit(1590569026.380:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=606 comm="apparmor_parser"
[ 11.780314] audit: type=1400 audit(1590569026.420:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=613 comm="apparmor_parser"
[ 11.780320] audit: type=1400 audit(1590569026.420:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=613 comm="apparmor_parser"
[ 11.804847] audit: type=1400 audit(1590569026.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=614 comm="apparmor_parser"
[ 11.813094] audit: type=1400 audit(1590569026.452:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=615 comm="apparmor_parser"
[ 11.816215] audit: type=1400 audit(1590569026.452:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=609 comm="apparmor_parser"
[ 11.816220] audit: type=1400 audit(1590569026.452:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=609 comm="apparmor_parser"
[ 12.159862] [drm] fb mappable at 0xD034D000
[ 12.159865] [drm] vram apper at 0xD0000000
[ 12.159866] [drm] size 5787648
[ 12.159867] [drm] fb depth is 24
[ 12.159867] [drm] pitch is 6400
[ 12.201433] fbcon: radeondrmfb (fb0) is primary device
[ 12.665319] Console: switching to colour frame buffer device 200x56
[ 12.669916] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 12.684937] [drm] Initialized radeon 2.50.0 20080528 for 0000:02:00.0 on minor 0
[ 15.591030] tg3 0000:03:00.0 enp3s0: Link is down
[ 17.127340] wlp5s0: authenticate with 34:27:92:43:32:f8
[ 17.161721] wlp5s0: send auth to 34:27:92:43:32:f8 (try 1/3)
[ 17.163609] wlp5s0: authenticated
[ 17.164457] wlp5s0: associate with 34:27:92:43:32:f8 (try 1/3)
[ 17.168203] wlp5s0: RX AssocResp from 34:27:92:43:32:f8 (capab=0x411 status=0 aid=7)
[ 17.168455] wlp5s0: associated
[ 17.218775] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.603539] rfkill: input handler disabled
[ 89.352070] rfkill: input handler enabled
[ 95.781700] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 98.746711] rfkill: input handler disabledj'ai d'ailleurs remarquer que lors du long écran noir au debut il y a des flash de Grub qui apparait 1 micro seconde et qui repart direct
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#11 Le 27/05/2020, à 09:48
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Le Boot-info que tu as collé dans le post #8 me parait normal.
Je souhaiterais que tu fasses l'autre manip que j'ai demandée dans le post #7 :
malbo a écrit :
Toujours depuis une session live, je te prie de tester le disque dur interne en suivant ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280
Hors ligne
#12 Le 27/05/2020, à 10:05
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Je précise que le problème ce produit aussi quand j'enleve le HDD (sda)
le voici :
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-22A0RT0
Serial Number: WD-WX61A30M4052
LU WWN Device Id: 5 0014ee 655711175
Firmware Version: 01.01A01
User Capacity: 500107862016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed May 27 09:04:06 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 181) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 310
3 Spin_Up_Time 0x0027 186 155 021 Pre-fail Always - 1658
4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7234
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5551
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 6757
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 4806
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 292
193 Load_Cycle_Count 0x0032 131 131 000 Old_age Always - 209869
194 Temperature_Celsius 0x0022 109 097 000 Old_age Always - 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Dernière modification par tomvt (Le 27/05/2020, à 10:06)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#13 Le 27/05/2020, à 10:27
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Dans le résultat que tu as collé dans le post #12, le résultat qui montre que le disque dur est vieillissant est cette ligne (il y a deux secteurs défectueux) :
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2Cela étant, ce n'est pas la cause de ton problème puisque tu as noté : "Je précise que le problème se produit aussi quand j’enlève le HDD (sda)"
Dernière modification par malbo (Le 27/05/2020, à 10:29)
Hors ligne
#14 Le 27/05/2020, à 10:31
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
malbo a écrit :
Dans le résultat que tu as collé dans le post #12, le résultat qui montre que le disque dur est vieillissant est cette ligne (il y a deux secteurs défectueux) :
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2Cela étant, ce n'est pas la cause de ton problème puisque tu as noté : "Je précise que le problème se produit aussi quand j’enlève le HDD (sda)"
Merci quand meme d'avoir essayé
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#15 Le 27/05/2020, à 10:43
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Extrait du Boot-info :
====================== sda1/boot/grub/grub.cfg (filtered) ======================
Ubuntu 25200507-d84a-4939-9762-1449f92db754
Ubuntu, avec Linux 5.3.0-53-generic 25200507-d84a-4939-9762-1449f92db754
Ubuntu, avec Linux 5.3.0-40-generic 25200507-d84a-4939-9762-1449f92db754
Ubuntu, avec Linux 5.3.0-28-generic 25200507-d84a-4939-9762-1449f92db754
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###On y voit qu'il y a eu une mise à jour récente du noyau : le noyau 5.3.0-53 est sorti de 20 mai 2020
Hors ligne
#16 Le 27/05/2020, à 10:45
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
malbo a écrit :
On y voit qu'il y a eu une mise à jour récente du noyau : le noyau 5.3.0-53 est sorti de 20 mai 2020
Euh ... oui surement ....Capture d’écran du 2020-05-27 12-00-23
ça a du se faire quand j'ai installer Ubuntu
Dernière modification par tomvt (Le 27/05/2020, à 11:13)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#17 Le 27/05/2020, à 13:07
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
tomvt a écrit :
ça a du se faire quand j'ai installer Ubuntu
Cette installation de Ubuntu 18.04, tu l'as faite il y a plusieurs mois ?
Hors ligne
#18 Le 27/05/2020, à 13:08
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
oui c'était vers Janvier , et pour 20.04 sur SSD c'était hier/avant-hier
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#19 Le 27/05/2020, à 13:24
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Oui, c'est l'ordre de grandeur à la grosse louche quand même : l'avant-dernier noyau (5.3.0-40) qu'on peut voir dans ton Boot-info est sorti à la mi-février. Je pense que c'est à ce moment que tu as fait l'installation. Comme il n'y a pas eu de mises à jour du noyau dans ton installation, j'en conclus que cet ordi n'a pas été utilisé pendant plusieurs mois (sinon les mises à jour automatiques du noyau auraient été faites) et que c'est très récemment que tu l'as remis en route. Tu confirmes ?
Dernière modification par malbo (Le 27/05/2020, à 13:29)
Hors ligne
#20 Le 27/05/2020, à 13:25
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Non a part ces 3 derniere semaine je l'ai utilisé au moins hebdomadairement avec une connection internet disponible x)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#21 Le 27/05/2020, à 13:31
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Soit.
Et du coup, ce problème des 1min 40 (ton post #1), il est apparu quand ?
Hors ligne
#22 Le 27/05/2020, à 13:33
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Depuis l'installation d'Ubuntu 20.04 sur le SSD hier et que quand je boot sur le SSD
Sur le HDD tout marche bien comme avant , c'est vraiment exclussif a quand je boot sur le SSD
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#23 Le 27/05/2020, à 14:02
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
tomvt a écrit :
Sur le HDD tout marche bien comme avant , c'est vraiment exclussif a quand je boot sur le SSD
Désolé de t'avoir fait perdre du temps : je n'avais pas compris que c'était exclusivement quand il y avait le SSD que tu avais le souci. Moi je ne suis pas spécialiste de ce genre de problème (vieux PC qui ne veut pas booter sur un SSD EXTERNE).
EDIT : peut-être une idée : le SSD externe étant connecté, je te prie de passer la commande suivante depuis une session de ton Ubuntu 18.04 installé et d'en donner le retour complet dans ta réponse :
sudo os-proberDernière modification par malbo (Le 27/05/2020, à 14:15)
Hors ligne
#24 Le 27/05/2020, à 15:07
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Rien de bien surprenant
machin@Machine2Machin:~$ sudo os-prober
[sudo] Mot de passe de machin :
/dev/sdb5:Ubuntu 20.04 LTS (20.04):Ubuntu:linux
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#25 Le 27/05/2020, à 16:08
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Oui, c'est ce qui était attendu. Je t'avais demandé ça parce que je pensais que ce serait utile de faire une mise à jour de Grub depuis une session de ton Ubuntu 18.04 afin d'avoir une entrée pour démarrer Ubuntu 20.04 depuis le menu Grub de Ubuntu 18.04 mais je me rends compte que c'est crétin comme idée (je préfère le dire comme ça) parce que ça n'évitera pas les 1min 40 de temps mort.
Cette fois, je suis bien sec.
Hors ligne