#26 Le 27/05/2020, à 16:13
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Merci quand meme , je vais voir si des gens ont autres chose a proposer , de mon coté je vais essayer de voir avec un ami qui a le meme PC que moi pour voir si ça vient de mon installation de Ubuntu ou de mon PC , si c'est la meme sur le sien , j'esserais d'installer Ubuntu sur d'autre disque amovible et d'autre manière.
Petite précision (c'est bete d'y penser que maintenant) : En gros j'arrivais pas installer Ubuntu avec l'option "autre" dcp j'ai debrancher mon HDD pour qu'il y est que mon SSD de branché et j'ai lancée une installation normal , je sais pas si ça change qqchose pour ce genre d'utilisation d'Ubuntu
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#27 Le 27/05/2020, à 17:19
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
tomvt a écrit :
Petite précision (c'est bête d'y penser que maintenant) : En gros j'arrivais pas à installer Ubuntu avec l'option "autre". Du coup, j'ai débranché mon HDD pour qu'il n'y ait que mon SSD de branché et j'ai lancé une installation normale , je sais pas si ça change quelque chose pour ce genre d'utilisation d'Ubuntu
ça se voyait dans le Boot-info que tu avais procédé comme ça. A mon avis, tu avais bien fait de déconnecter ton HDD parce que ça évitait deux conneries : primo d'écraser malencontreusement tout ce qu'il y avait dans ton HDD (il y en a d'autres qui se sont fait avoir...) et secundo, d'installer le chargeur d'amorçage du Grub de Ubuntu 20.04 dans le MBR du HDD (alors qu'il est impératif de l'installer dans le MBR du SSD). Donc si c'était à refaire, moi je te conseillerais de procéder exactement comme tu as fait.
Dernière modification par malbo (Le 27/05/2020, à 17:24)
Hors ligne
#28 Le 27/05/2020, à 17:21
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
Ok je note , je vois pas pourquoi ça chnageraiq quoi que ce soit mais j'essayerais aussi d'installer Ubuntu 18.04 au cas ou
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#29 Le 27/05/2020, à 19:00
- LukePerp
Re : Démarrage lent Ubuntu sur SSD externe
Les précédents retours ne montrent pas de symptone pour un démarrage de 1min40
Peux tu débrancher tous les accessoires usb (souris sans fil, disque externe et autres), clavier inclus, puis redémarre la machine, et donne nous sans attendre (en rebranchant le clavier) :
dmesg && sudo systemd-analyze && sudo systemd-analyze blameDernière modification par LukePerp (Le 27/05/2020, à 19:02)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Ethereum user
Hors ligne
#30 Le 27/05/2020, à 19:15
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
LukePerp a écrit :
Les précédents retours ne montrent pas de symptone pour un démarrage de 1min40
Peux tu débrancher tous les accessoires usb (souris sans fil, disque externe et autres), clavier inclus, puis redémarre la machine, et donne nous sans attendre (en rebranchant le clavier) :dmesg && sudo systemd-analyze && sudo systemd-analyze blame
C'est un ordinateur portable , il faut donc que je deconnecte le clavier et le pad intégré ainsi que le HHD interne ?
Dernière modification par tomvt (Le 27/05/2020, à 19:16)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#31 Le 27/05/2020, à 19:23
- LukePerp
Re : Démarrage lent Ubuntu sur SSD externe
tomvt a écrit :
C'est un ordinateur portable , il faut donc que je deconnecte le clavier et le pad intégré ainsi que le HHD interne ?
Mais non ! haha, déconnectes tous les accessoires usb auquel tu peux accéder.
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Ethereum user
Hors ligne
#32 Le 27/05/2020, à 20:21
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
+ de 2min d'ecran noir au debut :
voila le recap de démarage :
(je me suis permis de te le séparer pour la lisibilité)
genie@Portable:~$ dmesg && sudo systemd-analyze && sudo systemd-analyze blame
[ 0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08
[ 0.000000] Linux version 5.4.0-31-generic (buildd@lgw01-amd64-059) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #35-Ubuntu SMP Thu May 7 20:20:34 UTC 2020 (Ubuntu 5.4.0-31.35-generic 5.4.34)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=8e3c8d7c-4988-42ca-9665-11be108732bf ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf3e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3e4000-0x00000000bf40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf46ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf470000-0x00000000bf4f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4f1000-0x00000000bf70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf717fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf718000-0x00000000bf71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf77dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf77e000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7df000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f060a000-0x00000000f060afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 7741 /Aspire 7741 , BIOS V1.09 05/03/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.140 MHz processor
[ 0.006472] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006475] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.006490] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.006496] MTRR default type: uncachable
[ 0.006497] MTRR fixed ranges enabled:
[ 0.006499] 00000-9FFFF write-back
[ 0.006500] A0000-BFFFF uncachable
[ 0.006501] C0000-D3FFF write-protect
[ 0.006502] D4000-DFFFF uncachable
[ 0.006503] E0000-FFFFF write-through
[ 0.006504] MTRR variable ranges enabled:
[ 0.006505] 0 disabled
[ 0.006507] 1 base 000000000 mask F80000000 write-back
[ 0.006508] 2 base 080000000 mask FC0000000 write-back
[ 0.006510] 3 base 100000000 mask FC0000000 write-back
[ 0.006511] 4 base 138000000 mask FF8000000 uncachable
[ 0.006512] 5 disabled
[ 0.006512] 6 disabled
[ 0.006513] 7 disabled
[ 0.007246] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.007434] total RAM covered: 3968M
[ 0.008457] Found optimal setting for mtrr clean up
[ 0.008459] gran_size: 64K chunk_size: 256M num_reg: 4 lose cover RAM: 0G
[ 0.009048] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.009055] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.018257] found SMP MP-table at [mem 0x000f6c30-0x000f6c3f]
[ 0.026368] check: Scanning 1 areas for low memory corruption
[ 0.026377] BRK [0x10a801000, 0x10a801fff] PGTABLE
[ 0.026380] BRK [0x10a802000, 0x10a802fff] PGTABLE
[ 0.026382] BRK [0x10a803000, 0x10a803fff] PGTABLE
[ 0.026465] BRK [0x10a804000, 0x10a804fff] PGTABLE
[ 0.026468] BRK [0x10a805000, 0x10a805fff] PGTABLE
[ 0.026763] BRK [0x10a806000, 0x10a806fff] PGTABLE
[ 0.026786] BRK [0x10a807000, 0x10a807fff] PGTABLE
[ 0.026850] BRK [0x10a808000, 0x10a808fff] PGTABLE
[ 0.026979] BRK [0x10a809000, 0x10a809fff] PGTABLE
[ 0.027099] BRK [0x10a80a000, 0x10a80afff] PGTABLE
[ 0.027340] RAMDISK: [mem 0x3219b000-0x350c4fff]
[ 0.027353] ACPI: Early table checksum verification disabled
[ 0.027359] ACPI: RSDP 0x00000000000F6AC0 000024 (v02 PTLTD )
[ 0.027364] ACPI: XSDT 0x00000000BF7F181D 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.027374] ACPI: FACP 0x00000000BF7E1000 0000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.027383] ACPI: DSDT 0x00000000BF7E2000 00D36D (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.027388] ACPI: FACS 0x00000000BF79AFC0 000040
[ 0.027392] ACPI: FACS 0x00000000BF79AFC0 000040
[ 0.027396] ACPI: HPET 0x00000000BF7FED86 000038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.027401] ACPI: MCFG 0x00000000BF7FEDBE 00003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.027406] ACPI: SLIC 0x00000000BF7FEDFA 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.027411] ACPI: APIC 0x00000000BF7FEF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.027416] ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.027421] ACPI: SSDT 0x00000000BF7E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.027437] ACPI: Local APIC address 0xfee00000
[ 0.027588] No NUMA configuration found
[ 0.027590] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.027605] NODE_DATA(0) allocated [mem 0x137fd5000-0x137ffffff]
[ 0.028044] Zone ranges:
[ 0.028045] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.028047] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.028048] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.028049] Device empty
[ 0.028051] Movable zone start for each node
[ 0.028055] Early memory node ranges
[ 0.028056] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.028058] node 0: [mem 0x0000000000100000-0x00000000bf27bfff]
[ 0.028059] node 0: [mem 0x00000000bf282000-0x00000000bf3e3fff]
[ 0.028060] node 0: [mem 0x00000000bf40f000-0x00000000bf46efff]
[ 0.028061] node 0: [mem 0x00000000bf70f000-0x00000000bf717fff]
[ 0.028062] node 0: [mem 0x00000000bf71f000-0x00000000bf77dfff]
[ 0.028063] node 0: [mem 0x00000000bf79f000-0x00000000bf7defff]
[ 0.028064] node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[ 0.028065] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.028112] Zeroed struct page in unavailable ranges: 2942 pages
[ 0.028114] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.028116] On node 0 totalpages: 1012866
[ 0.028118] DMA zone: 64 pages used for memmap
[ 0.028119] DMA zone: 21 pages reserved
[ 0.028120] DMA zone: 3995 pages, LIFO batch:0
[ 0.028213] DMA32 zone: 12180 pages used for memmap
[ 0.028214] DMA32 zone: 779495 pages, LIFO batch:63
[ 0.047986] Normal zone: 3584 pages used for memmap
[ 0.047989] Normal zone: 229376 pages, LIFO batch:63
[ 0.053204] ACPI: PM-Timer IO Port: 0x408
[ 0.053209] ACPI: Local APIC address 0xfee00000
[ 0.053221] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.053222] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.053235] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.053238] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.053241] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.053243] ACPI: IRQ0 used by override.
[ 0.053244] ACPI: IRQ9 used by override.
[ 0.053248] Using ACPI (MADT) for SMP configuration information
[ 0.053250] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.053258] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.053308] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.053310] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.053311] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.053312] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.053313] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.053314] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.053315] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.053318] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
[ 0.053320] PM: Registered nosave memory: [mem 0xbf3e4000-0xbf40efff]
[ 0.053323] PM: Registered nosave memory: [mem 0xbf46f000-0xbf46ffff]
[ 0.053324] PM: Registered nosave memory: [mem 0xbf470000-0xbf4f0fff]
[ 0.053325] PM: Registered nosave memory: [mem 0xbf4f1000-0xbf70efff]
[ 0.053328] PM: Registered nosave memory: [mem 0xbf718000-0xbf71efff]
[ 0.053331] PM: Registered nosave memory: [mem 0xbf77e000-0xbf79efff]
[ 0.053333] PM: Registered nosave memory: [mem 0xbf7df000-0xbf7fefff]
[ 0.053336] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.053337] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.053338] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.053339] PM: Registered nosave memory: [mem 0xf0000000-0xf0609fff]
[ 0.053340] PM: Registered nosave memory: [mem 0xf060a000-0xf060afff]
[ 0.053341] PM: Registered nosave memory: [mem 0xf060b000-0xfeafefff]
[ 0.053341] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.053342] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.053343] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.053344] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.053345] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.053346] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.053347] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.053347] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.053348] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.053349] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.053352] [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.053353] Booting paravirtualized kernel on bare hardware
[ 0.053358] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.053369] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.053758] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
[ 0.053771] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
[ 0.053772] pcpu-alloc: [0] 0 1
[ 0.053828] Built 1 zonelists, mobility grouping on. Total pages: 997017
[ 0.053829] Policy zone: Normal
[ 0.053831] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=8e3c8d7c-4988-42ca-9665-11be108732bf ro quiet splash vt.handoff=7
[ 0.054615] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.054943] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.054998] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.064960] Calgary: detecting Calgary via BIOS EBDA area
[ 0.064963] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.083378] Memory: 3834052K/4051464K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 217412K reserved, 0K cma-reserved)
[ 0.083390] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.083639] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.083661] Kernel/User page tables isolation: enabled
[ 0.083685] ftrace: allocating 44484 entries in 174 pages
[ 0.111615] rcu: Hierarchical RCU implementation.
[ 0.111618] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.111619] Tasks RCU enabled.
[ 0.111620] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.111621] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.117135] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.117524] vt handoff: transparent VT on vt#7
[ 0.117539] Console: colour dummy device 80x25
[ 0.117547] printk: console [tty0] enabled
[ 0.117573] ACPI: Core revision 20190816
[ 0.117721] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.117738] APIC: Switch to symmetric I/O mode setup
[ 0.118246] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.137737] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35aeee3b5fb, max_idle_ns: 881590527072 ns
[ 0.137743] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.28 BogoMIPS (lpj=7448560)
[ 0.137746] pid_max: default: 32768 minimum: 301
[ 0.137795] LSM: Security Framework initializing
[ 0.137812] Yama: becoming mindful.
[ 0.137846] AppArmor: AppArmor initialized
[ 0.137907] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.137921] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.137946] *** VALIDATE tmpfs ***
[ 0.138181] *** VALIDATE proc ***
[ 0.138260] *** VALIDATE cgroup1 ***
[ 0.138263] *** VALIDATE cgroup2 ***
[ 0.138329] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.138341] process: using mwait in idle threads
[ 0.138345] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.138346] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.138351] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.138353] Spectre V2 : Mitigation: Full generic retpoline
[ 0.138354] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.138354] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.138356] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.138358] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.138362] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.138579] Freeing SMP alternatives memory: 40K
[ 0.249972] smpboot: CPU0: Intel(R) Pentium(R) CPU P6000 @ 1.87GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.250144] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.250153] core: CPUID marked event: 'bus cycles' unavailable
[ 0.250155] ... version: 3
[ 0.250156] ... bit width: 48
[ 0.250156] ... generic registers: 4
[ 0.250157] ... value mask: 0000ffffffffffff
[ 0.250158] ... max period: 000000007fffffff
[ 0.250159] ... fixed-purpose events: 3
[ 0.250160] ... event mask: 000000070000000f
[ 0.250215] rcu: Hierarchical SRCU implementation.
[ 0.251310] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.251367] smp: Bringing up secondary CPUs ...
[ 0.251550] x86: Booting SMP configuration:
[ 0.251551] .... node #0, CPUs: #1
[ 0.253833] smp: Brought up 1 node, 2 CPUs
[ 0.253833] smpboot: Max logical packages: 1
[ 0.253833] smpboot: Total of 2 processors activated (7448.56 BogoMIPS)
[ 0.255254] devtmpfs: initialized
[ 0.255254] x86/mm: Memory block size: 128MB
[ 0.257800] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[ 0.257814] PM: Registering ACPI NVS region [mem 0xbf77e000-0xbf79efff] (135168 bytes)
[ 0.257903] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.257903] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.257903] pinctrl core: initialized pinctrl subsystem
[ 0.258022] PM: RTC time: 19:14:03, date: 2020-05-27
[ 0.258197] NET: Registered protocol family 16
[ 0.258335] audit: initializing netlink subsys (disabled)
[ 0.258349] audit: type=2000 audit(1590606843.140:1): state=initialized audit_enabled=0 res=1
[ 0.258349] EISA bus registered
[ 0.258349] cpuidle: using governor ladder
[ 0.258349] cpuidle: using governor menu
[ 0.258349] Simple Boot Flag at 0x3e set to 0x80
[ 0.258349] ACPI: bus type PCI registered
[ 0.258349] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258349] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.258349] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.258349] PCI: Using configuration type 1 for base access
[ 0.261796] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.261897] ACPI: Added _OSI(Module Device)
[ 0.261899] ACPI: Added _OSI(Processor Device)
[ 0.261900] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.261901] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.261903] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.261904] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.261906] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.283230] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.285776] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.286488] ACPI: Dynamic OEM Table Load:
[ 0.286496] ACPI: SSDT 0xFFFF98CB3338EC00 00032A (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.287972] ACPI: Dynamic OEM Table Load:
[ 0.287979] ACPI: SSDT 0xFFFF98CB332F4000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.289961] ACPI: Dynamic OEM Table Load:
[ 0.289967] ACPI: SSDT 0xFFFF98CB3338F800 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.291182] ACPI: Dynamic OEM Table Load:
[ 0.291187] ACPI: SSDT 0xFFFF98CB333B9200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.292555] ACPI: EC: EC started
[ 0.292556] ACPI: EC: interrupt blocked
[ 0.330385] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.330388] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.330390] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.330391] ACPI: Interpreter enabled
[ 0.330427] ACPI: (supports S0 S3 S4 S5)
[ 0.330429] ACPI: Using IOAPIC for interrupt routing
[ 0.330483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.330876] ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.353374] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.353383] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.353471] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.354702] PCI host bridge to bus 0000:00
[ 0.354705] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.354707] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.354709] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.354710] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.354712] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.354714] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.354715] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[ 0.354717] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.354731] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.354763] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.354919] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.354973] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.355164] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.355187] pci 0000:00:16.0: reg 0x10: [mem 0xf0604000-0xf060400f 64bit]
[ 0.355253] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.355411] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.355434] pci 0000:00:1a.0: reg 0x10: [mem 0xf0606000-0xf06063ff]
[ 0.355519] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.355694] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.355716] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit]
[ 0.355793] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355963] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.356050] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.356222] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.356309] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.356498] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.356521] pci 0000:00:1d.0: reg 0x10: [mem 0xf0607000-0xf06073ff]
[ 0.356607] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.356780] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.357003] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.357270] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.357290] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 0.357298] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 0.357305] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 0.357313] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 0.357320] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 0.357328] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff]
[ 0.357372] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.357540] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.357559] pci 0000:00:1f.3: reg 0x10: [mem 0xf0609000-0xf06090ff 64bit]
[ 0.357580] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.357821] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[ 0.357841] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.357852] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
[ 0.357859] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.357872] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.357878] pci 0000:02:00.0: enabling Extended Tags
[ 0.357919] pci 0000:02:00.0: supports D1 D2
[ 0.357935] pci 0000:02:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
[ 0.358013] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 0.358033] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
[ 0.358066] pci 0000:02:00.1: enabling Extended Tags
[ 0.358106] pci 0000:02:00.1: supports D1 D2
[ 0.358185] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.358188] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.358190] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.358194] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.358304] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 0.358342] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.358405] pci 0000:03:00.0: enabling Extended Tags
[ 0.358498] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.358688] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.358692] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.358696] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.358701] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.358780] pci 0000:05:00.0: [168c:002a] type 00 class 0x028000
[ 0.358815] pci 0000:05:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
[ 0.358953] pci 0000:05:00.0: supports D1
[ 0.358955] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.359076] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.359089] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.359094] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.359115] pci_bus 0000:0f: extended config space not accessible
[ 0.359174] pci 0000:00:1e.0: PCI bridge to [bus 0f] (subtractive decode)
[ 0.359184] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.359185] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.359187] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.359189] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.359191] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.359192] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.359194] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[ 0.367311] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.367433] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.367553] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.367672] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.367791] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.367909] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.368029] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.368148] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.368257] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.368263] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.368417] PCI host bridge to bus 0000:ff
[ 0.368420] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.368430] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.368498] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.368588] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.368652] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.368713] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.368777] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.369805] ACPI: EC: interrupt unblocked
[ 0.369813] ACPI: EC: event unblocked
[ 0.369820] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.369822] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.370021] iommu: Default domain type: Translated
[ 0.370048] SCSI subsystem initialized
[ 0.370084] libata version 3.00 loaded.
[ 0.370084] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ 0.370084] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.370084] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.370084] vgaarb: loaded
[ 0.370084] ACPI: bus type USB registered
[ 0.370084] usbcore: registered new interface driver usbfs
[ 0.370084] usbcore: registered new interface driver hub
[ 0.370084] usbcore: registered new device driver usb
[ 0.370084] pps_core: LinuxPPS API ver. 1 registered
[ 0.370084] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.370084] PTP clock support registered
[ 0.370084] EDAC MC: Ver: 3.0.0
[ 0.370084] PCI: Using ACPI for IRQ routing
[ 0.378102] PCI: pci_cache_line_size set to 64 bytes
[ 0.378181] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.378183] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.378185] e820: reserve RAM buffer [mem 0xbf3e4000-0xbfffffff]
[ 0.378187] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.378189] e820: reserve RAM buffer [mem 0xbf718000-0xbfffffff]
[ 0.378191] e820: reserve RAM buffer [mem 0xbf77e000-0xbfffffff]
[ 0.378192] e820: reserve RAM buffer [mem 0xbf7df000-0xbfffffff]
[ 0.378194] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.378353] NetLabel: Initializing
[ 0.378354] NetLabel: domain hash size = 128
[ 0.378354] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.378384] NetLabel: unlabeled traffic allowed by default
[ 0.378999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.379006] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.381775] clocksource: Switched to clocksource tsc-early
[ 0.403956] *** VALIDATE bpf ***
[ 0.404077] VFS: Disk quotas dquot_6.6.0
[ 0.404103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.404143] *** VALIDATE ramfs ***
[ 0.404149] *** VALIDATE hugetlbfs ***
[ 0.404289] AppArmor: AppArmor Filesystem Enabled
[ 0.404335] pnp: PnP ACPI init
[ 0.404664] system 00:00: [io 0x0500-0x050f] has been reserved
[ 0.404666] system 00:00: [io 0xffff] has been reserved
[ 0.404668] system 00:00: [io 0xffff] has been reserved
[ 0.404670] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.404672] system 00:00: [io 0x1180-0x11ff] has been reserved
[ 0.404674] system 00:00: [io 0xfe00] has been reserved
[ 0.404683] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.404769] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.404898] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.404933] pnp 00:03: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[ 0.405601] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.405604] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.405606] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.405608] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.405610] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.405612] system 00:04: [mem 0xf060a000-0xf060afff] has been reserved
[ 0.405614] system 00:04: [mem 0xc0000000-0xc0000fff] has been reserved
[ 0.405616] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.405618] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.405620] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.405622] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.405625] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.405631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405901] pnp: PnP ACPI: found 5 devices
[ 0.407979] thermal_sys: Registered thermal governor 'fair_share'
[ 0.407980] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.407981] thermal_sys: Registered thermal governor 'step_wise'
[ 0.407982] thermal_sys: Registered thermal governor 'user_space'
[ 0.407983] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.412477] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.412537] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.412541] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.412556] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.412559] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.412563] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.412566] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.412569] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.412573] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.412576] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.412580] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.412583] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.412587] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.412591] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.412596] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.412598] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.412603] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.412606] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.412612] pci 0000:00:1e.0: PCI bridge to [bus 0f]
[ 0.412623] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.412625] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.412626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.412628] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.412630] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.412631] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window]
[ 0.412633] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff window]
[ 0.412635] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.412636] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.412638] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.412640] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.412641] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.412643] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.412645] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.412646] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.412648] pci_bus 0000:05: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.412650] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7 window]
[ 0.412651] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff window]
[ 0.412653] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.412655] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.412657] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.412658] pci_bus 0000:0f: resource 9 [mem 0x000e0000-0x000e3fff window]
[ 0.412660] pci_bus 0000:0f: resource 10 [mem 0xc0000000-0xfeafffff window]
[ 0.412850] NET: Registered protocol family 2
[ 0.413123] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.413189] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.413384] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.413586] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.413642] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.413690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.413797] NET: Registered protocol family 1
[ 0.413806] NET: Registered protocol family 44
[ 0.414668] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.414678] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
[ 0.414736] PCI: CLS 64 bytes, default 64
[ 0.414842] Trying to unpack rootfs image as initramfs...
[ 0.640662] Freeing initrd memory: 48296K
[ 0.640744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.640747] software IO TLB: mapped [mem 0xbb27c000-0xbf27c000] (64MB)
[ 0.640948] check: Scanning for low memory corruption every 60 seconds
[ 0.641496] Initialise system trusted keyrings
[ 0.641509] Key type blacklist registered
[ 0.641587] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.643767] zbud: loaded
[ 0.644381] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.644634] fuse: init (API version 7.31)
[ 0.644660] *** VALIDATE fuse ***
[ 0.644662] *** VALIDATE fuse ***
[ 0.644818] Platform Keyring initialized
[ 0.652911] Key type asymmetric registered
[ 0.652913] Asymmetric key parser 'x509' registered
[ 0.652936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.653006] io scheduler mq-deadline registered
[ 0.654173] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.654258] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 0.654260] vesafb: scrolling: redraw
[ 0.654261] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.654291] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3904k, total 3904k
[ 0.654358] fbcon: Deferring console take-over
[ 0.654359] fb0: VESA VGA frame buffer device
[ 0.654378] intel_idle: MWAIT substates: 0x120
[ 0.654379] intel_idle: v0.4.1 model 0x25
[ 0.654475] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.655858] ACPI: AC Adapter [ADP1] (off-line)
[ 0.655964] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.656013] ACPI: Lid Switch [LID0]
[ 0.656061] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.656099] ACPI: Sleep Button [SLPB]
[ 0.656145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.656182] ACPI: Power Button [PWRF]
[ 0.693821] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.693823] ACPI: Thermal Zone [TZS0] (63 C)
[ 0.707138] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.707139] ACPI: Thermal Zone [TZS1] (42 C)
[ 0.707517] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.730839] Linux agpgart interface v0.103
[ 0.736640] loop: module loaded
[ 0.737231] libphy: Fixed MDIO Bus: probed
[ 0.737234] tun: Universal TUN/TAP device driver, 1.6
[ 0.737383] PPP generic driver version 2.4.2
[ 0.737575] VFIO - User Level meta-driver version: 0.3
[ 0.737753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.737761] ehci-pci: EHCI PCI platform driver
[ 0.744332] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.744348] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.744368] ehci-pci 0000:00:1a.0: debug port 2
[ 0.748448] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.748481] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0606000
[ 0.763318] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.763468] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.763472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.763476] usb usb1: Product: EHCI Host Controller
[ 0.763479] usb usb1: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
[ 0.763482] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.763913] hub 1-0:1.0: USB hub found
[ 0.763937] hub 1-0:1.0: 3 ports detected
[ 0.764863] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.764875] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.764892] ehci-pci 0000:00:1d.0: debug port 2
[ 0.768960] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.768991] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0607000
[ 0.783316] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.783442] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.783446] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.783450] usb usb2: Product: EHCI Host Controller
[ 0.783453] usb usb2: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
[ 0.783456] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.783879] hub 2-0:1.0: USB hub found
[ 0.783902] hub 2-0:1.0: 3 ports detected
[ 0.784242] ehci-platform: EHCI generic platform driver
[ 0.784266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.784281] ohci-pci: OHCI PCI platform driver
[ 0.784304] ohci-platform: OHCI generic platform driver
[ 0.784320] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.784461] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.808677] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.808687] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.809072] mousedev: PS/2 mouse device common for all mice
[ 0.809713] rtc_cmos 00:01: RTC can wake from S4
[ 0.810076] rtc_cmos 00:01: registered as rtc0
[ 0.810114] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.810131] i2c /dev entries driver
[ 0.810241] device-mapper: uevent: version 1.0.3
[ 0.810421] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.810472] platform eisa.0: Probing EISA bus 0
[ 0.810476] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.810480] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.810483] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.810486] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.810489] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.810492] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.810495] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.810498] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.810501] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.810504] platform eisa.0: EISA: Detected 0 cards
[ 0.810509] intel_pstate: CPU model not supported
[ 0.810571] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.810717] drop_monitor: Initializing network drop monitor service
[ 0.811202] NET: Registered protocol family 10
[ 0.832444] Segment Routing with IPv6
[ 0.832520] NET: Registered protocol family 17
[ 0.832624] Key type dns_resolver registered
[ 0.833152] RAS: Correctable Errors collector initialized.
[ 0.833206] microcode: sig=0x20652, pf=0x10, revision=0x11
[ 0.833441] microcode: Microcode Update Driver: v2.2.
[ 0.833450] IPI shorthand broadcast: enabled
[ 0.833470] sched_clock: Marking stable (833139072, 285719)->(841671682, -8246891)
[ 0.833874] registered taskstats version 1
[ 0.833901] Loading compiled-in X.509 certificates
[ 0.839340] Loaded X.509 cert 'Build time autogenerated kernel key: 0877109df09d880f03477498890f5473480a68b0'
[ 0.839397] zswap: loaded using pool lzo/zbud
[ 0.839705] Key type ._fscrypt registered
[ 0.839707] Key type .fscrypt registered
[ 0.842425] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.865514] Key type big_key registered
[ 0.874817] Key type encrypted registered
[ 0.874825] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.874840] ima: No TPM chip found, activating TPM-bypass!
[ 0.874854] ima: Allocated hash algorithm: sha1
[ 0.874870] ima: No architecture policies found
[ 0.874904] evm: Initialising EVM extended attributes:
[ 0.874907] evm: security.selinux
[ 0.874908] evm: security.SMACK64
[ 0.874909] evm: security.SMACK64EXEC
[ 0.874911] evm: security.SMACK64TRANSMUTE
[ 0.874912] evm: security.SMACK64MMAP
[ 0.874913] evm: security.apparmor
[ 0.874914] evm: security.ima
[ 0.874915] evm: security.capability
[ 0.874917] evm: HMAC attrs: 0x1
[ 0.875524] PM: Magic number: 4:208:244
[ 0.875609] acpi device:5a: hash matches
[ 0.875726] rtc_cmos 00:01: setting system clock to 2020-05-27T19:14:04 UTC (1590606844)
[ 0.910674] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.912643] Freeing unused decrypted memory: 2040K
[ 0.913432] Freeing unused kernel image memory: 2712K
[ 0.913514] Write protecting the kernel read-only data: 22528k
[ 0.914337] Freeing unused kernel image memory: 2008K
[ 0.914775] Freeing unused kernel image memory: 1196K
[ 0.933962] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.934003] x86/mm: Checking user space page tables
[ 0.952842] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.952845] Run /init as init process
[ 1.080088] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 1.093684] random: fast init done
[ 1.093686] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.093714] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.093764] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.099311] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.104691] acpi device:02: registered as cooling_device2
[ 1.104794] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 1.115892] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.117720] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.128010] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 1.128013] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.128292] hub 1-1:1.0: USB hub found
[ 1.128372] hub 1-1:1.0: 6 ports detected
[ 1.138277] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[ 1.138288] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.138295] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[ 1.138301] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20190816/utaddress-204)
[ 1.138305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.138306] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[ 1.138310] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20190816/utaddress-204)
[ 1.138314] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.138315] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[ 1.138320] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20190816/utaddress-204)
[ 1.138323] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.138324] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.139056] tg3.c:v3.137 (May 11, 2014)
[ 1.140964] ahci 0000:00:1f.2: version 3.0
[ 1.141264] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.141287] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 1.141290] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.142052] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.146294] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 1.146298] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.146669] hub 2-1:1.0: USB hub found
[ 1.146758] hub 2-1:1.0: 8 ports detected
[ 1.151200] libphy: tg3 mdio bus: probed
[ 1.155755] scsi host0: ahci
[ 1.157873] scsi host1: ahci
[ 1.158065] scsi host2: ahci
[ 1.166133] Broadcom BCM57780 300:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01, irq=POLL)
[ 1.166546] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:a8:12:ce
[ 1.166549] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.166551] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.168319] scsi host3: ahci
[ 1.172546] scsi host4: ahci
[ 1.172639] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 27
[ 1.172641] ata2: DUMMY
[ 1.172642] ata3: DUMMY
[ 1.172642] ata4: DUMMY
[ 1.172644] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 27
[ 1.208861] tg3 0000:03:00.0 enp3s0: renamed from eth0
[ 1.433803] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.484764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.486536] ata1.00: ATA-8: WDC WD5000BEVT-22A0RT0, 01.01A01, max UDMA/133
[ 1.486540] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.486761] usb 2-1.1: New USB device found, idVendor=04e8, idProduct=61f5, bcdDevice= 1.00
[ 1.486766] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.486769] usb 2-1.1: Product: Portable SSD T5
[ 1.486772] usb 2-1.1: Manufacturer: Samsung
[ 1.486775] usb 2-1.1: SerialNumber: 12345680CFC8
[ 1.488346] ata1.00: configured for UDMA/133
[ 1.489961] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 1A01 PQ: 0 ANSI: 5
[ 1.490155] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.490329] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.490345] sd 0:0:0:0: [sda] Write Protect is off
[ 1.490347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.490370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.492577] usbcore: registered new interface driver usb-storage
[ 1.495666] scsi host5: uas
[ 1.495806] usbcore: registered new interface driver uas
[ 1.497045] scsi 5:0:0:0: Direct-Access Samsung Portable SSD T5 0 PQ: 0 ANSI: 6
[ 1.498697] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.500756] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.501256] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.501261] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1.502024] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.502658] sd 5:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 1.519785] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 1.525723] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.569794] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.634221] usb 2-1.5: New USB device found, idVendor=064e, idProduct=a219, bcdDevice= 2.15
[ 1.634224] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.634227] usb 2-1.5: Product: 1.3M WebCam
[ 1.634228] usb 2-1.5: Manufacturer: Suyin
[ 1.634230] usb 2-1.5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[ 1.653804] tsc: Refined TSC clocksource calibration: 1862.000 MHz
[ 1.653817] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade5b3d62, max_idle_ns: 881590641950 ns
[ 1.653849] clocksource: Switched to clocksource tsc
[ 1.805774] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.818654] ata5.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
[ 1.832453] ata5.00: configured for UDMA/100
[ 1.839252] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
[ 1.902051] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.902055] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.918139] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.918242] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.847939] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 5.024121] sda: sda1 sda2 < sda5 > sda3
[ 5.025354] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.602058] fbcon: Taking over console
[ 6.602183] Console: switching to colour frame buffer device 144x54
[ 6.688213] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.255265] systemd[1]: Inserted module 'autofs4'
[ 7.299909] systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 7.317964] systemd[1]: Detected architecture x86-64.
[ 7.340201] systemd[1]: Set hostname to <Portable>.
[ 7.738843] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 7.900589] systemd[1]: Created slice system-modprobe.slice.
[ 7.901006] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.901368] systemd[1]: Created slice User and Session Slice.
[ 7.901476] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.901842] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.901920] systemd[1]: Reached target User and Group Name Lookups.
[ 7.901948] systemd[1]: Reached target Remote File Systems.
[ 7.901966] systemd[1]: Reached target Slices.
[ 7.905447] systemd[1]: Listening on Syslog Socket.
[ 7.905610] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.905705] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.906052] systemd[1]: Listening on Journal Audit Socket.
[ 7.906210] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.906397] systemd[1]: Listening on Journal Socket.
[ 7.906580] systemd[1]: Listening on udev Control Socket.
[ 7.906714] systemd[1]: Listening on udev Kernel Socket.
[ 7.908278] systemd[1]: Mounting Huge Pages File System...
[ 7.909780] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.911489] systemd[1]: Mounting Kernel Debug File System...
[ 7.913131] systemd[1]: Mounting Kernel Trace File System...
[ 7.915536] systemd[1]: Starting Journal Service...
[ 7.917712] systemd[1]: Starting Set the console keyboard layout...
[ 7.919674] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 7.921097] systemd[1]: Starting Load Kernel Module drm...
[ 7.923441] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 7.923511] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 7.930869] systemd[1]: Starting Load Kernel Modules...
[ 7.932358] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.933958] systemd[1]: Starting udev Coldplug all Devices...
[ 7.935711] systemd[1]: Starting Uncomplicated firewall...
[ 7.944165] systemd[1]: Mounted Huge Pages File System.
[ 7.944389] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.944593] systemd[1]: Mounted Kernel Trace File System.
[ 7.945360] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 7.948601] systemd[1]: Mounted Kernel Debug File System.
[ 7.978178] systemd[1]: Finished Uncomplicated firewall.
[ 7.984900] systemd[1]: modprobe@drm.service: Succeeded.
[ 7.985430] systemd[1]: Finished Load Kernel Module drm.
[ 7.989183] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 7.993070] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 8.002019] systemd[1]: Activating swap /swapfile...
[ 8.007407] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 8.007521] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 8.008996] systemd[1]: Starting Load/Save Random Seed...
[ 8.011419] systemd[1]: Starting Create System Users...
[ 8.058258] lp: driver loaded but no devices found
[ 8.073907] systemd[1]: Finished Create System Users.
[ 8.076294] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.077160] systemd[1]: Finished Load/Save Random Seed.
[ 8.106771] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 8.108516] systemd[1]: Starting udev Kernel Device Manager...
[ 8.115696] ppdev: user-space parallel port driver
[ 8.123361] systemd[1]: Finished Load Kernel Modules.
[ 8.125238] systemd[1]: Mounting FUSE Control File System...
[ 8.134252] systemd[1]: Mounting Kernel Configuration File System...
[ 8.135814] systemd[1]: Starting Apply Kernel Variables...
[ 8.164654] systemd[1]: Mounted FUSE Control File System.
[ 8.164879] systemd[1]: Mounted Kernel Configuration File System.
[ 8.212726] systemd[1]: Finished Apply Kernel Variables.
[ 8.252417] systemd[1]: Finished Set the console keyboard layout.
[ 8.252619] systemd[1]: Reached target Local File Systems (Pre).
[ 8.262657] systemd[1]: Mounting Mount unit for core18, revision 1705...
[ 8.265021] systemd[1]: Mounting Mount unit for core18, revision 1754...
[ 8.272156] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 24...
[ 8.285010] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33...
[ 8.306699] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
[ 8.327186] systemd[1]: Mounting Mount unit for snap-store, revision 433...
[ 8.330078] systemd[1]: Mounting Mount unit for snap-store, revision 454...
[ 8.332683] systemd[1]: Mounting Mount unit for snapd, revision 7264...
[ 8.341776] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 8.342140] systemd[1]: Activated swap /swapfile.
[ 8.342252] systemd[1]: Reached target Swap.
[ 8.375816] systemd[1]: Finished udev Coldplug all Devices.
[ 8.387576] systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1506.
[ 8.407206] systemd[1]: Started udev Kernel Device Manager.
[ 8.415663] systemd[1]: Starting Show Plymouth Boot Screen...
[ 8.423450] systemd[1]: Mounted Mount unit for gnome-3-34-1804, revision 24.
[ 8.441709] systemd[1]: Received SIGRTMIN+20 from PID 361 (plymouthd).
[ 8.442689] systemd[1]: Mounted Mount unit for gnome-3-34-1804, revision 33.
[ 8.459077] systemd[1]: Mounted Mount unit for core18, revision 1705.
[ 8.459600] systemd[1]: Mounted Mount unit for snap-store, revision 433.
[ 8.464059] systemd[1]: Started Show Plymouth Boot Screen.
[ 8.466247] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 8.466474] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 8.469233] systemd[1]: Reached target Local Encrypted Volumes.
[ 8.482825] systemd[1]: Mounted Mount unit for snapd, revision 7264.
[ 8.498714] systemd[1]: Mounted Mount unit for core18, revision 1754.
[ 8.504358] systemd[1]: Mounted Mount unit for snap-store, revision 454.
[ 8.725111] systemd[1]: Started Journal Service.
[ 8.746513] systemd-journald[301]: Received client request to flush runtime journal.
[ 9.879917] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 9.880066] acer_wmi: Function bitmap for Communication Button: 0x1
[ 9.895839] input: Acer WMI hotkeys as /devices/virtual/input/input7
[ 9.980415] random: crng init done
[ 9.980418] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.983924] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.005117] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.040567] mc: Linux media interface: v0.10
[ 10.101462] videodev: Linux video capture interface: v2.00
[ 10.270204] [drm] radeon kernel modesetting enabled.
[ 10.270293] radeon 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[ 10.270295] radeon 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xcfee0000 -> 0xcfefffff
[ 10.270297] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[ 10.270299] fb0: switching to radeondrmfb from VESA VGA
[ 10.270411] Console: switching to colour dummy device 80x25
[ 10.270477] radeon 0000:02:00.0: vgaarb: deactivate vga console
[ 10.280654] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1025:0x037E 0x00).
[ 10.280729] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d4000-0x000d7fff window]
[ 10.280736] caller pci_map_rom+0x71/0x18c mapping multiple BARs
[ 10.280770] ATOM BIOS: Acer
[ 10.280933] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 10.280935] radeon 0000:02:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 10.280942] [drm] Detected VRAM RAM=512M, BAR=256M
[ 10.280943] [drm] RAM width 64bits DDR
[ 10.286384] [TTM] Zone kernel: Available graphics memory: 1945172 KiB
[ 10.286387] [TTM] Initializing pool allocator
[ 10.286394] [TTM] Initializing DMA pool allocator
[ 10.286420] [drm] radeon: 512M of VRAM memory ready
[ 10.286422] [drm] radeon: 1024M of GTT memory ready.
[ 10.286444] [drm] Loading CEDAR Microcode
[ 10.377544] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 10.398376] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ 10.398380] uvcvideo 2-1.5:1.0: Entity type for entity Processing 3 was not initialized!
[ 10.398382] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ 10.398481] input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[ 10.398639] usbcore: registered new interface driver uvcvideo
[ 10.398640] USB Video Class driver (1.1.1)
[ 10.464156] [drm] Internal thermal controller without fan control
[ 10.474742] ath: phy0: Enable WAR for ASPM D3/L1
[ 10.737781] [drm] radeon: dpm initialized
[ 10.749048] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 10.758663] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 10.859060] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 10.877373] radeon 0000:02:00.0: WB enabled
[ 10.877380] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x00000000539e8852
[ 10.877382] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0000000044c952c8
[ 10.877771] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x000000000c4b2fe9
[ 10.879424] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.879426] [drm] Driver supports precise vblank timestamp query.
[ 10.879428] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[ 10.879542] radeon 0000:02:00.0: radeon: using MSI.
[ 10.879575] [drm] radeon: irq initialized.
[ 10.899738] [drm] ring test on 0 succeeded in 0 usecs
[ 10.899747] [drm] ring test on 3 succeeded in 2 usecs
[ 10.913440] ath: EEPROM regdomain: 0x65
[ 10.913442] ath: EEPROM indicates we should expect a direct regpair map
[ 10.913444] ath: Country alpha2 being used: 00
[ 10.913445] ath: Regpair used: 0x65
[ 10.916831] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.917506] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffa69d00600000, irq=17
[ 10.942436] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.942440] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.942442] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.942444] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.942445] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.942448] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 10.942449] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 10.978705] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
[ 11.076165] [drm] ring test on 5 succeeded in 1 usecs
[ 11.076171] [drm] UVD initialized successfully.
[ 11.076407] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input9
[ 11.076751] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.076824] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.083221] [drm] ib test on ring 0 succeeded in 0 usecs
[ 11.083258] [drm] ib test on ring 3 succeeded in 0 usecs
[ 11.768192] [drm] ib test on ring 5 succeeded
[ 11.833888] [drm] radeon atom DIG backlight initialized
[ 11.833895] [drm] Radeon Display Connectors
[ 11.833897] [drm] Connector 0:
[ 11.833898] [drm] LVDS-1
[ 11.833900] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 11.833900] [drm] Encoders:
[ 11.833901] [drm] LCD1: INTERNAL_UNIPHY
[ 11.833902] [drm] Connector 1:
[ 11.833903] [drm] HDMI-A-1
[ 11.833904] [drm] HPD1
[ 11.833906] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 11.833906] [drm] Encoders:
[ 11.833907] [drm] DFP1: INTERNAL_UNIPHY1
[ 11.833907] [drm] Connector 2:
[ 11.833908] [drm] VGA-1
[ 11.833910] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 11.833911] [drm] Encoders:
[ 11.833911] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 11.852545] audit: type=1400 audit(1590606855.470:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=628 comm="apparmor_parser"
[ 11.865671] audit: type=1400 audit(1590606855.482:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=626 comm="apparmor_parser"
[ 11.865677] audit: type=1400 audit(1590606855.482:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=626 comm="apparmor_parser"
[ 11.865680] audit: type=1400 audit(1590606855.482:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=626 comm="apparmor_parser"
[ 11.882193] audit: type=1400 audit(1590606855.502:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=633 comm="apparmor_parser"
[ 11.882199] audit: type=1400 audit(1590606855.502:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=633 comm="apparmor_parser"
[ 11.899060] audit: type=1400 audit(1590606855.518:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=634 comm="apparmor_parser"
[ 11.922351] audit: type=1400 audit(1590606855.542:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=635 comm="apparmor_parser"
[ 11.936883] audit: type=1400 audit(1590606855.554:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=637 comm="apparmor_parser"
[ 11.955574] audit: type=1400 audit(1590606855.574:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=638 comm="apparmor_parser"
[ 12.524552] [drm] fb mappable at 0xD034D000
[ 12.524555] [drm] vram apper at 0xD0000000
[ 12.524556] [drm] size 5787648
[ 12.524556] [drm] fb depth is 24
[ 12.524557] [drm] pitch is 6400
[ 12.547089] fbcon: radeondrmfb (fb0) is primary device
[ 12.547199] Console: switching to colour frame buffer device 200x56
[ 12.547256] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 12.558425] [drm] Initialized radeon 2.50.0 20080528 for 0000:02:00.0 on minor 0
[ 15.787412] tg3 0000:03:00.0 enp3s0: Link is down
[ 17.129278] wlp5s0: authenticate with 34:27:92:43:32:f8
[ 17.163294] wlp5s0: send auth to 34:27:92:43:32:f8 (try 1/3)
[ 17.166032] wlp5s0: authenticated
[ 17.170066] wlp5s0: associate with 34:27:92:43:32:f8 (try 1/3)
[ 17.173924] wlp5s0: RX AssocResp from 34:27:92:43:32:f8 (capab=0x411 status=0 aid=3)
[ 17.174062] wlp5s0: associated
[ 17.234462] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.682083] rfkill: input handler disabled
[ 43.377577] rfkill: input handler enabled
[ 49.514650] EXT4-fs (sdb3): recovery complete
[ 49.514658] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 50.128509] rfkill: input handler disabled[sudo] Mot de passe de genie :
Startup finished in 7.145s (kernel) + 18.090s (userspace) = 25.235s
graphical.target reached after 18.027s in userspace10.637s plymouth-quit-wait.service
7.342s NetworkManager-wait-online.service
3.543s dev-sdb5.device
2.494s udisks2.service
2.380s snapd.service
2.368s networkd-dispatcher.service
2.117s dev-loop5.device
2.095s dev-loop7.device
2.027s dev-loop2.device
1.982s dev-loop3.device
1.875s accounts-daemon.service
1.822s dev-loop4.device
1.758s dev-loop6.device
1.545s NetworkManager.service
1.428s avahi-daemon.service
1.427s polkit.service
1.329s apport.service
1.295s switcheroo-control.service
1.247s thermald.service
1.244s grub-common.service
1.237s systemd-logind.service
1.226s systemd-resolved.service
1.217s wpa_supplicant.service
1.046s dev-loop1.device
988ms dev-loop0.device
921ms systemd-timesyncd.service
820ms upower.service
809ms systemd-journald.service
761ms gpu-manager.service
632ms ModemManager.service
626ms grub-initrd-fallback.service
567ms rsyslog.service
555ms e2scrub_reap.service
497ms systemd-rfkill.service
445ms systemd-journal-flush.service
441ms systemd-udev-trigger.service
424ms user@1000.service
340ms swapfile.swap
334ms keyboard-setup.service
298ms systemd-udevd.service
295ms apparmor.service
285ms gdm.service
233ms snap-core18-1754.mount
196ms snap-core18-1705.mount
192ms systemd-modules-load.service
181ms packagekit.service
174ms snap-snap\x2dstore-454.mount
157ms snap-gnome\x2d3\x2d34\x2d1804-33.mount
151ms snap-gnome\x2d3\x2d34\x2d1804-24.mount
150ms snap-snapd-7264.mount
145ms snapd.apparmor.service
138ms systemd-fsck@dev-disk-by\x2duuid-3C0D\x2d07C7.service
132ms snap-snap\x2dstore-433.mount
116ms colord.service
105ms snapd.seeded.service
97ms systemd-tmpfiles-setup.service
91ms pppd-dns.service
80ms snap-gtk\x2dcommon\x2dthemes-1506.mount
76ms systemd-sysctl.service
68ms systemd-random-seed.service
63ms modprobe@drm.service
62ms systemd-sysusers.service
60ms systemd-remount-fs.service
59ms kerneloops.service
48ms plymouth-start.service
45ms user-runtime-dir@1000.service
43ms systemd-user-sessions.service
42ms ufw.service
39ms sys-fs-fuse-connections.mount
37ms sys-kernel-debug.mount
36ms systemd-update-utmp-runlevel.service
35ms dev-hugepages.mount
34ms dev-mqueue.mount
34ms console-setup.service
31ms sys-kernel-tracing.mount
30ms sys-kernel-config.mount
30ms systemd-tmpfiles-setup-dev.service
30ms systemd-backlight@backlight:acpi_video0.service
28ms systemd-update-utmp.service
25ms openvpn.service
25ms kmod-static-nodes.service
24ms setvtrgb.service
24ms alsa-restore.service
23ms boot-efi.mount
22ms rtkit-daemon.service
18ms snapd.socket
17ms plymouth-read-write.service
11ms systemd-backlight@backlight:radeon_bl0.service
3ms clean-mount-point@media-genie-41103d9b\x2d5459\x2d43c3\x2d8d60\x2d73a8dcc9d21d.serviceDernière modification par tomvt (Le 27/05/2020, à 20:23)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#33 Le 27/05/2020, à 21:07
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
J’ai remarqué ceci aussi au démarrage : https://youtu.be/yr88ey7lZKU
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#34 Le 28/05/2020, à 06:46
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Bonjour,
Il y a déjà eu un problème de compatibilité avec le modèle de SSD externe que tu utilises (Portable SSD T5 de Samsung) : c'est herveD qui en parle dans cette discussion : https://forum.ubuntu-fr.org/viewtopic.php?id=2046377 (il a dû renvoyer ce SSD externe au fabricant).
Hors ligne
#35 Le 28/05/2020, à 07:29
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
malbo a écrit :
Bonjour,
Il y a déjà eu un problème de compatibilité avec le modèle de SSD externe que tu utilises (Portable SSD T5 de Samsung) : c'est herveD qui en parle dans cette discussion : https://forum.ubuntu-fr.org/viewtopic.php?id=2046377 (il a dû renvoyer ce SSD externe au fabricant).
J'ai moi aussi un SSD Samsung T5 mais bon , l'OS prends du temps mais ce lance bien (et marche niquel sur un PC qui 16Go de Ram) , mon autre partition en ext4 pour les fichier marche impécable , donc je pense pas que j'ai le meme problème que lui
toute fois on a peut etre un début d'explication dans leur post #5 :
Qid a écrit :
Bah oui... Il le sont tous... Comme je l'ai dit il suffit de le formater avant la première utilisation... Après sinon ça doit aussi pouvoir venir de la carte mère qui comme elle est limitée dans son support de quantité de RAM peut peut-être l'être aussi pour la taille des disques dur mais j'en doute...
Dernière modification par tomvt (Le 28/05/2020, à 07:32)
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#36 Le 28/05/2020, à 08:24
- malbo
Re : Démarrage lent Ubuntu sur SSD externe
Quoi qu'il en soit, ton vieux portable Acer Aspire 7741 a des problèmes au démarrage quand ce SSD externe est connecté. Moi je n'ai pas d'idée sur ce qu'il faudrait faire pour résoudre ce problème.
Hors ligne
#37 Le 28/06/2021, à 23:05
- c.h.u
Re : Démarrage lent Ubuntu sur SSD externe
Bonsoir à tous. Désolé pour le detterrage de post mais je regarde également le T5 de Samsung pour remplacer un vieux WD vieillissant. Est-ce que tu as fait quelque chose de spécial pour installer Ubuntu dessus ou juste un formatage au premier démarrage ?
Merci d'avance de ton retour et bonne soirée.
Pttigui
La curiosité est un vilain défaut, surtout chez Microsoft ;)
Hors ligne
#38 Le 28/06/2021, à 23:10
- tomvt
Re : Démarrage lent Ubuntu sur SSD externe
c.h.u a écrit :
Bonsoir à tous. Désolé pour le detterrage de post mais je regarde également le T5 de Samsung pour remplacer un vieux WD vieillissant. Est-ce que tu as fait quelque chose de spécial pour installer Ubuntu dessus ou juste un formatage au premier démarrage ?
Merci d'avance de ton retour et bonne soirée.
Pttigui
Je ne sais plus trop mais juste du le formater avec l’outils de base sur l’installeur d’Ubuntu (Gnome Disk ? Partitionner disque ?).
Le SSD marche très bien pour ma part, toute fois fait attention à ne pas faire la même erreur que moi , un SSD ça marche vite , mais si au bout tu le mets sur de l’USB 2.0 les perf seront très fortement bridé.
6 ans sous Linux et toujours pas capable de faire une clé bootable
Ubuntu 20.04
Hors ligne
#39 Le 29/06/2021, à 16:32
- c.h.u
Re : Démarrage lent Ubuntu sur SSD externe
Bonjour Tomvt, merci pour ton retour 
. J'ai du US3 3.x donc je ne devrais pas trop perdre. Une petite question complémentaire quand même avant d'aller investir dans un SSD externe, est-ce que tu as vu une différence importante par rapport à ton ancien disque malgré la limitation de l'USB 2.0 ?
La curiosité est un vilain défaut, surtout chez Microsoft ;)
Hors ligne