[RESOLU] passage à 20.04

Cricri30 · Le 06/11/2020, à 18:42

Bonjour,
après la mise a niveau 20.04 je n'ai plus accès à ma freebox ni au PC windows sur le même réseau.
dans fichiers -> autres emplacements freebox serveur et réseau windows sont bien présents
en cliquant dessus j'ai : obtention de la liste de partage du serveur a echoué

une idée un conseil
merci

PS: je suis débutant en ubuntu

sur le forum : https://forum.ubuntu-fr.org/viewtopic.p … #p22281874

Dernière modification par Cricri30 (Le 06/11/2020, à 21:11)

nany · Le 06/11/2020, à 19:17

Bonjour,

Donne, s’il te plaît, les retours de :

sudo sed -i '/\[global\]/a\\n## SMB Protocol\n# Protocol NT1 is insecure, prefer SMB2 and SMB3.\n# For Freebox, NT1 is essential.\nclient min protocol = NT1\nserver min protocol = NT1\nntlm auth = ntlmv1-permitted' /etc/samba/smb.conf && head -40 /etc/samba/smb.conf

sudo systemctl restart smbd.service

Source.

Dernière modification par nany (Le 06/11/2020, à 21:40)

malbo · Le 06/11/2020, à 20:43

Bonjour,
C'est vrai que la version 20.04 pose un problème avec la Freebox. Mais il y a moyen de s'en sortir : https://forum.ubuntu-fr.org/viewtopic.p … #p22281874

Cricri30 · Le 06/11/2020, à 20:43

server min protocol = NT1
ntlm auth = ntlmv1-permitted
# smb.conf(5) manual page in order to understand the options listed

## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.
client min protocol = NT1
server min protocol = NT1
ntlm auth = ntlmv1-permitted
# here. Samba has a huge number of configurable options most of which

## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.
client min protocol = NT1
server min protocol = NT1
ntlm auth = ntlmv1-permitted
# are not shown in this example

## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.

Cricri30 · Le 06/11/2020, à 20:46

Failed to restart smbd.service: Unit smbd.service not found.

xubu1957 · Le 06/11/2020, à 20:48

Bonjour,

Pour ajouter toi-même les balises code à tes précédents messages #4 et #5 :

Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message

Comme indiqué dans le premier message du tutoriel Retour utilisable de commande.

server min protocol = NT1
ntlm auth = ntlmv1-permitted
# smb.conf(5) manual page in order to understand the options listed

## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.
client min protocol = NT1
server min protocol = NT1
ntlm auth = ntlmv1-permitted
# here. Samba has a huge number of configurable options most of which

## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.
client min protocol = NT1
server min protocol = NT1
ntlm auth = ntlmv1-permitted
# are not shown in this example

## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.

Failed to restart smbd.service: Unit smbd.service not found.

Dernière modification par xubu1957 (Le 06/11/2020, à 20:49)

nany · Le 06/11/2020, à 20:49

Cricri30 a écrit :

server min protocol = NT1
ntlm auth = ntlmv1-permitted
# smb.conf(5) manual page in order to understand the options listed
## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.
client min protocol = NT1
server min protocol = NT1
ntlm auth = ntlmv1-permitted
# here. Samba has a huge number of configurable options most of which
## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.
client min protocol = NT1
server min protocol = NT1
ntlm auth = ntlmv1-permitted
# are not shown in this example
## SMB Protocol
# Protocol NT1 is insecure, prefer SMB2 and SMB3.
# For Freebox, NT1 is essential.

C’est quoi ça ?

Lis le premier message de ce fil puis donne nous le retour de :

cat -n /etc/samba/smb.conf

Cricri30 · Le 06/11/2020, à 20:59

Bonsoir, le retour contient 1500 lignes , normal ??

je vais tenter la solution de Malbo.

merci

nany · Le 06/11/2020, à 21:35

Cricri30 a écrit :

Bonsoir, le retour contient 1500 lignes , normal ??

Non ce n’est pas normal et c’est pour ça qu’on a besoin de le voir.

Pour info, le mien fait 249 lignes :

┏[ vendredi 06 novembre 2020 ]
┣ nany@stupidcomputer :
┗▶ ~$ cat -n /etc/samba/smb.conf
     1	#
     2	# Sample configuration file for the Samba suite for Debian GNU/Linux.
     3	#
     4	#
     5	# This is the main Samba configuration file. You should read the
     6	# smb.conf(5) manual page in order to understand the options listed
     7	# here. Samba has a huge number of configurable options most of which 
     8	# are not shown in this example
     9	#
    10	# Some options that are often worth tuning have been included as
    11	# commented-out examples in this file.
    12	#  - When such options are commented with ";", the proposed setting
    13	#    differs from the default Samba behaviour
    14	#  - When commented with "#", the proposed setting is the default
    15	#    behaviour of Samba but the option is considered important
    16	#    enough to be mentioned here
    17	#
    18	# NOTE: Whenever you modify this file you should run the command
    19	# "testparm" to check that you have not made any basic syntactic 
    20	# errors. 
    21	
    22	#======================= Global Settings =======================
    23	
    24	[global]
    25	
    26	## SMB Protocol
    27	# Protocol NT1 is insecure, prefer SMB2 and SMB3.
    28	# For Freebox, NT1 is essential.
    29	client min protocol = NT1
    30	server min protocol = NT1
    31	ntlm auth = ntlmv1-permitted
    32	
    33	## Browsing/Identification ###
    34	
    35	# Change this to the workgroup/NT-domain name your Samba server will part of
    36	   workgroup = WORKGROUP
    37	
    38	# server string is the equivalent of the NT Description field
    39	   server string = %h server (Samba, Ubuntu)
    40	
    41	#### Networking ####
    42	
    43	# The specific set of interfaces / networks to bind to
    44	# This can be either the interface name or an IP address/netmask;
    45	# interface names are normally preferred
    46	;   interfaces = 127.0.0.0/8 eth0
    47	
    48	# Only bind to the named interfaces and/or networks; you must use the
    49	# 'interfaces' option above to use this.
    50	# It is recommended that you enable this feature if your Samba machine is
    51	# not protected by a firewall or is a firewall itself.  However, this
    52	# option cannot handle dynamic or non-broadcast interfaces correctly.
    53	;   bind interfaces only = yes
    54	
    55	
    56	
    57	#### Debugging/Accounting ####
    58	
    59	# This tells Samba to use a separate log file for each machine
    60	# that connects
    61	   log file = /var/log/samba/log.%m
    62	
    63	# Cap the size of the individual log files (in KiB).
    64	   max log size = 1000
    65	
    66	# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
    67	# Append syslog@1 if you want important messages to be sent to syslog too.
    68	   logging = file
    69	
    70	# Do something sensible when Samba crashes: mail the admin a backtrace
    71	   panic action = /usr/share/samba/panic-action %d
    72	
    73	
    74	####### Authentication #######
    75	
    76	# Server role. Defines in which mode Samba will operate. Possible
    77	# values are "standalone server", "member server", "classic primary
    78	# domain controller", "classic backup domain controller", "active
    79	# directory domain controller". 
    80	#
    81	# Most people will want "standalone server" or "member server".
    82	# Running as "active directory domain controller" will require first
    83	# running "samba-tool domain provision" to wipe databases and create a
    84	# new domain.
    85	   server role = standalone server
    86	
    87	   obey pam restrictions = yes
    88	
    89	# This boolean parameter controls whether Samba attempts to sync the Unix
    90	# password with the SMB password when the encrypted SMB password in the
    91	# passdb is changed.
    92	   unix password sync = yes
    93	
    94	# For Unix password sync to work on a Debian GNU/Linux system, the following
    95	# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    96	# sending the correct chat script for the passwd program in Debian Sarge).
    97	   passwd program = /usr/bin/passwd %u
    98	   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    99	
   100	# This boolean controls whether PAM will be used for password changes
   101	# when requested by an SMB client instead of the program listed in
   102	# 'passwd program'. The default is 'no'.
   103	   pam password change = yes
   104	
   105	# This option controls how unsuccessful authentication attempts are mapped
   106	# to anonymous connections
   107	   map to guest = bad user
   108	
   109	########## Domains ###########
   110	
   111	#
   112	# The following settings only takes effect if 'server role = primary
   113	# classic domain controller', 'server role = backup domain controller'
   114	# or 'domain logons' is set 
   115	#
   116	
   117	# It specifies the location of the user's
   118	# profile directory from the client point of view) The following
   119	# required a [profiles] share to be setup on the samba server (see
   120	# below)
   121	;   logon path = \\%N\profiles\%U
   122	# Another common choice is storing the profile in the user's home directory
   123	# (this is Samba's default)
   124	#   logon path = \\%N\%U\profile
   125	
   126	# The following setting only takes effect if 'domain logons' is set
   127	# It specifies the location of a user's home directory (from the client
   128	# point of view)
   129	;   logon drive = H:
   130	#   logon home = \\%N\%U
   131	
   132	# The following setting only takes effect if 'domain logons' is set
   133	# It specifies the script to run during logon. The script must be stored
   134	# in the [netlogon] share
   135	# NOTE: Must be store in 'DOS' file format convention
   136	;   logon script = logon.cmd
   137	
   138	# This allows Unix users to be created on the domain controller via the SAMR
   139	# RPC pipe.  The example command creates a user account with a disabled Unix
   140	# password; please adapt to your needs
   141	; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
   142	
   143	# This allows machine accounts to be created on the domain controller via the 
   144	# SAMR RPC pipe.  
   145	# The following assumes a "machines" group exists on the system
   146	; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
   147	
   148	# This allows Unix groups to be created on the domain controller via the SAMR
   149	# RPC pipe.  
   150	; add group script = /usr/sbin/addgroup --force-badname %g
   151	
   152	############ Misc ############
   153	
   154	# Using the following line enables you to customise your configuration
   155	# on a per machine basis. The %m gets replaced with the netbios name
   156	# of the machine that is connecting
   157	;   include = /home/samba/etc/smb.conf.%m
   158	
   159	# Some defaults for winbind (make sure you're not using the ranges
   160	# for something else.)
   161	;   idmap config * :              backend = tdb
   162	;   idmap config * :              range   = 3000-7999
   163	;   idmap config YOURDOMAINHERE : backend = tdb
   164	;   idmap config YOURDOMAINHERE : range   = 100000-999999
   165	;   template shell = /bin/bash
   166	
   167	# Setup usershare options to enable non-root users to share folders
   168	# with the net usershare command.
   169	
   170	# Maximum number of usershare. 0 means that usershare is disabled.
   171	#   usershare max shares = 100
   172	
   173	# Allow users who've been granted usershare privileges to create
   174	# public shares, not just authenticated ones
   175	   usershare allow guests = yes
   176	
   177	#======================= Share Definitions =======================
   178	
   179	# Un-comment the following (and tweak the other settings below to suit)
   180	# to enable the default home directory shares. This will share each
   181	# user's home directory as \\server\username
   182	;[homes]
   183	;   comment = Home Directories
   184	;   browseable = no
   185	
   186	# By default, the home directories are exported read-only. Change the
   187	# next parameter to 'no' if you want to be able to write to them.
   188	;   read only = yes
   189	
   190	# File creation mask is set to 0700 for security reasons. If you want to
   191	# create files with group=rw permissions, set next parameter to 0775.
   192	;   create mask = 0700
   193	
   194	# Directory creation mask is set to 0700 for security reasons. If you want to
   195	# create dirs. with group=rw permissions, set next parameter to 0775.
   196	;   directory mask = 0700
   197	
   198	# By default, \\server\username shares can be connected to by anyone
   199	# with access to the samba server.
   200	# Un-comment the following parameter to make sure that only "username"
   201	# can connect to \\server\username
   202	# This might need tweaking when using external authentication schemes
   203	;   valid users = %S
   204	
   205	# Un-comment the following and create the netlogon directory for Domain Logons
   206	# (you need to configure Samba to act as a domain controller too.)
   207	;[netlogon]
   208	;   comment = Network Logon Service
   209	;   path = /home/samba/netlogon
   210	;   guest ok = yes
   211	;   read only = yes
   212	
   213	# Un-comment the following and create the profiles directory to store
   214	# users profiles (see the "logon path" option above)
   215	# (you need to configure Samba to act as a domain controller too.)
   216	# The path below should be writable by all users so that their
   217	# profile directory may be created the first time they log on
   218	;[profiles]
   219	;   comment = Users profiles
   220	;   path = /home/samba/profiles
   221	;   guest ok = no
   222	;   browseable = no
   223	;   create mask = 0600
   224	;   directory mask = 0700
   225	
   226	[printers]
   227	   comment = All Printers
   228	   browseable = no
   229	   path = /var/spool/samba
   230	   printable = yes
   231	   guest ok = no
   232	   read only = yes
   233	   create mask = 0700
   234	
   235	# Windows clients look for this share name as a source of downloadable
   236	# printer drivers
   237	[print$]
   238	   comment = Printer Drivers
   239	   path = /var/lib/samba/printers
   240	   browseable = yes
   241	   read only = yes
   242	   guest ok = no
   243	# Uncomment to allow remote administration of Windows print drivers.
   244	# You may need to replace 'lpadmin' with the name of the group your
   245	# admin users are members of.
   246	# Please note that you also need to set appropriate Unix permissions
   247	# to the drivers directory for these users to have write rights in it
   248	;   write list = root, @lpadmin
   249	

┏[ vendredi 06 novembre 2020 ]
┣ nany@stupidcomputer :
┗▶ ~$

xubu1957 · Le 08/07/2021, à 17:29

[HS]

Bonjour,

@nany

Pour cette discussion > Probleme lecture ecriture OpenOffice et LibreOffice sur partage reseau, des conseils ?

Merci par avance.

[/HS]

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 06/11/2020, à 18:42

[RESOLU] passage à 20.04

#2 Le 06/11/2020, à 19:17

Re : [RESOLU] passage à 20.04

#3 Le 06/11/2020, à 20:43

Re : [RESOLU] passage à 20.04

#4 Le 06/11/2020, à 20:43

Re : [RESOLU] passage à 20.04

#5 Le 06/11/2020, à 20:46

Re : [RESOLU] passage à 20.04

#6 Le 06/11/2020, à 20:48

Re : [RESOLU] passage à 20.04

#7 Le 06/11/2020, à 20:49

Re : [RESOLU] passage à 20.04

#8 Le 06/11/2020, à 20:59

Re : [RESOLU] passage à 20.04

#9 Le 06/11/2020, à 21:35

Re : [RESOLU] passage à 20.04

#10 Le 08/07/2021, à 17:29

Re : [RESOLU] passage à 20.04

Pied de page des forums