#1 Le 18/11/2020, à 17:52
- poulou
[Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
bonsoir, depuis l'istallation d'Ubuntu 20.04 j'ai installé hplip mais je n'arrive pas à installer le plugin.
Avec HP device manager, en cliquant sur "install required plugin" rien ne se passe.
Je vous remercie si vous trouvez une solution.
Je ne sais pas si ça peut aider :
/usr/share/hplip/check.py:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
HP Linux Imaging and Printing System (ver. 3.20.9)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.20.9)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
[code]/usr/share/hplip/check.py:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
HP Linux Imaging and Printing System (ver. 3.20.9)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.20.9)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
-Gtk-Message: 17:14:52.333: Failed to load module "canberra-gtk-module"
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
HP Linux Imaging and Printing System (ver. 3.20.9)
HPLIP upgrade latest version ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Latest version of HPLIP is already installed.
Checking for Dependencies....
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-54-generic #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020 GNU/Linux
Host: poulou-K55VD
Proc: 5.4.0-54-generic #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020 GNU/Linux
Distribution: 12 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.9
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.9
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.9
html=/usr/share/doc/hplip-3.20.9
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.9
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.9
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1605697190
pending_upgrade_time = 0
latest_available_version = 3.17.10
[installation]
date_time = 11/18/20 17:14:53
version = 3.20.9
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
Gtk-Message: 17:14:57.846: Failed to load module "canberra-gtk-module"
Gtk-Message: 17:14:57.870: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.14.1 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.14.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.9 OK -
hpmudext IO-Extension REQUIRED - 3.20.9 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.9 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.9 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `epsonscan2:EPSON Scanner:esci2:usb:ES00EB:315' is a EPSON EPSON Scanner flatbed scanner
device `epsonscan2:EPSON Scanner:esci2:usb:ES00EB:315' is a EPSON EPSON Scanner flatbed scanner
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ----------------
hp:/usb/HP_LaserJet_1018?serial= HP LaserJet 1018
KP1LPMY
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-1018
----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP1LPMY
PPD: /etc/cups/ppd/HP-LaserJet-1018.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-1018.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-1018 is idle. enabled since Mi 18 Nov 2020 16:41:54
Communication status: Good
--------------
| PERMISSION |
--------------
USB HP-LaserJet-1018 Required - - OK Node:'/dev/bus/usb/003/003' Perm:' root lp rw- rw- rw- rw- r--'
Checking for Configured Queues....
warning: Fail to read ppd=/etc/cups/ppd/HP-LaserJet-1018.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/HP-LaserJet-1018.ppd
warning: Could not complete Queue(s) configuration check
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Diagnose completed...
More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
Please close this terminal manually.
[/code]
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
-Gtk-Message: 17:14:52.333: Failed to load module "canberra-gtk-module"
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
HP Linux Imaging and Printing System (ver. 3.20.9)
HPLIP upgrade latest version ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Latest version of HPLIP is already installed.
Checking for Dependencies....
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-54-generic #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020 GNU/Linux
Host: poulou-K55VD
Proc: 5.4.0-54-generic #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020 GNU/Linux
Distribution: 12 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.9
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.9
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.9
html=/usr/share/doc/hplip-3.20.9
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.9
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.9
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1605697190
pending_upgrade_time = 0
latest_available_version = 3.17.10
[installation]
date_time = 11/18/20 17:14:53
version = 3.20.9
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
Gtk-Message: 17:14:57.846: Failed to load module "canberra-gtk-module"
Gtk-Message: 17:14:57.870: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.14.1 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.14.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.9 OK -
hpmudext IO-Extension REQUIRED - 3.20.9 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.9 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.9 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `epsonscan2:EPSON Scanner:esci2:usb:ES00EB:315' is a EPSON EPSON Scanner flatbed scanner
device `epsonscan2:EPSON Scanner:esci2:usb:ES00EB:315' is a EPSON EPSON Scanner flatbed scanner
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ----------------
hp:/usb/HP_LaserJet_1018?serial= HP LaserJet 1018
KP1LPMY
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-1018
----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP1LPMY
PPD: /etc/cups/ppd/HP-LaserJet-1018.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-1018.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-1018 is idle. enabled since Mi 18 Nov 2020 16:41:54
Communication status: Good
--------------
| PERMISSION |
--------------
USB HP-LaserJet-1018 Required - - OK Node:'/dev/bus/usb/003/003' Perm:' root lp rw- rw- rw- rw- r--'
Checking for Configured Queues....
warning: Fail to read ppd=/etc/cups/ppd/HP-LaserJet-1018.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/HP-LaserJet-1018.ppd
warning: Could not complete Queue(s) configuration check
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Diagnose completed...
More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
Please close this terminal manually. Dernière modification par poulou (Le 19/11/2020, à 08:26)
Hors ligne
#2 Le 19/11/2020, à 08:27
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
le problème s'est résolu de lui-même sans rien faire, je n'y comprends rien
Dernière modification par poulou (Le 19/11/2020, à 08:27)
Hors ligne
#3 Le 19/11/2020, à 10:25
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
Par curiosité : pourquoi as-tu installé le dernier hplip ?
Dernière modification par grigouille (Le 19/11/2020, à 10:32)
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#4 Le 19/11/2020, à 12:49
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
parce que je ne m'y connais pas , j'ai dû me débrouiller seul dans l'urgence( pour pouvoir imprimer mes factures) Pourquoi il ne fallait pas ?
L'installation automatique de l'imprimante par Ubuntu 20.04 ne fonctionnait pas.
Hors ligne
#5 Le 19/11/2020, à 14:23
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
hplip est dans les dépôts : il n'y a rien à faire.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#6 Le 19/11/2020, à 16:42
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
mon imprimante ne fonctionnait de nouveau plus, j'ai refait l'installation d'hplip via les dépôts mais ça ne se passe jamais comme ça devrait.
Pas moyen d'installer le plugin, elle n'est alors pas reconnue, je redémarre l'ordi et ça marche ,je n'y comprends rien
Hors ligne
#7 Le 19/11/2020, à 17:03
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
poulou a écrit :
j'ai refait l'installation d'hplip via les dépôts
J'ai un doute : donne
hp-setup -h | grep verDebian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#8 Le 19/11/2020, à 17:07
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
ce sera pour dimanche soir, là je pars à ma caravane avec l'ordi mais sans l'imprimante
Hors ligne
#9 Le 19/11/2020, à 17:11
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
Pas besoin de l'imprimante pour hp-setup -h
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#10 Le 20/11/2020, à 19:33
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
poulou@poulou-K55VD:~$ hp-setup -h | grep ver
HP Linux Imaging and Printing System (ver. 3.20.9)
Printer/Fax Setup Utility ver. 9.0
Hors ligne
#11 Le 21/11/2020, à 09:55
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
Mon doute est confirmé : tu utilises la 3.20.9 alors que la version des dépôts sur Ubuntu 20.04 est 3.20.3.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#12 Le 21/11/2020, à 19:31
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
et ? Problème?
Hors ligne
#13 Le 21/11/2020, à 19:50
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
Aucun problème, tu peux utiliser la 3.20.9 si tu veux. Par contre tu avais dit que tu étais repassé sur la version des dépôts :
poulou a écrit :
j'ai refait l'installation d'hplip via les dépôts
Je ne sais pas ce que tu as fait mais tu n'es pas sur la version des dépôts.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#14 Le 23/11/2020, à 07:53
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
exactement, je ne comprends pas non plus
Hors ligne
#15 Le 23/11/2020, à 08:23
- grigouille
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
C'est pourtant dans la doc :
https://doc.ubuntu-fr.org/hplip#desinst … n_de_hplip
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#16 Le 23/11/2020, à 22:08
- poulou
Re : [Résolu]HP Laserjet 1018,impossible d'installer ,télécharger le plugin
j'aurais dû lire ça...
Hors ligne