Pages : 1
#1 Le 03/12/2020, à 16:39
- Chanchris
(resolu)Impossible de démarrer sur Ubuntu
Bonjour,
Après plusieurs désagréments, j'ai du réinstaller ubuntu mate 20.04. J'ai du faire aussi un boot-repair en CD Live mais sans succès.
Le problème vient du Bios UEFI de mon PC. En effet, je modifie l'ordre de démarrage pour avoir Ubuntu en tête pour démarrer sur Grub. Mais cet ordre de démarrage n'est pas mémorisé malgré que je clique sur enregistrer et quitter. Dès que je sors du Bios, l'entrée Ubuntu est remise à sa position avant modification.
Le PC démarre alors sur la première entrée trouvée dans le Bios soit le CD soit Windows. Donc impossible de démarrer Ubuntu
A quoi celà est du ? Que faire ?
Merci de vos conseils.
Dernière modification par Chanchris (Le 19/12/2020, à 20:43)
Hors ligne
#2 Le 03/12/2020, à 17:52
- lucmars
Re : (resolu)Impossible de démarrer sur Ubuntu
C'est un HP ton pc ?
Gaulois Matter !
Hors ligne
#3 Le 04/12/2020, à 18:46
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Oui c'est un HP PavilLion 500-365 NF
Hors ligne
#4 Le 04/12/2020, à 18:56
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Bonjour,
J'ai installé UBUNTU Mate 20.04.
Au démarrage du PC, si Ubuntu est bien en tête dans le Bios, j'ai un écran noir qui s'affiche avec une ligne "grub>" et du texte en anglais sur le haut qui donne les instructions pour entrer une commande.
Si je tape exit, au bout de quelques secondes, l'écran de boot GRUB s'affiche alors avec le choix du système à charger.
Malgré plusieurs "Boot repair" en session Live avec le CD, cet écran noir apparait toujours.
Si je fais un tour dans le bios au préalable, pas d'écran noir, le menu de boot s'affiche.
A quoi est-ce dû ? Comment supprimer cet écran noir ?
Mon PC est un HP Pavillions 500-365 NF avec bios UEFI et carte graphique Nvidia GeForce GT 705.
Ubuntu est installé avec pilotes NVIDIA.
Cordialement
Hors ligne
#5 Le 04/12/2020, à 19:10
- lucmars
Re : (resolu)Impossible de démarrer sur Ubuntu
On se retrouve donc sur ton nouveau fil, c'est ça ?
Gaulois Matter !
Hors ligne
#6 Le 04/12/2020, à 19:16
- lucmars
Re : (resolu)Impossible de démarrer sur Ubuntu
Depuis ton buntu installé fais-nous un boot-info (voir la doc).
Possible que ton disque ait un pète quelque part, on verra cela plus tard.
Gaulois Matter !
Hors ligne
#7 Le 05/12/2020, à 20:00
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Voici mon boot info :
https://paste.ubuntu.com/p/WfzXv7tz82/
A vous lire,
Hors ligne
#8 Le 05/12/2020, à 20:02
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Avec le problème du bios qui ne garde pas en mémoire la séquence de boot.
Hors ligne
#9 Le 05/12/2020, à 20:08
- lucmars
Re : (resolu)Impossible de démarrer sur Ubuntu
Chanchris a écrit :
Avec le problème du bios qui ne garde pas en mémoire la séquence de boot.
Avec certain modèle HP c'est parfois le cas.
Gaulois Matter !
Hors ligne
#10 Le 05/12/2020, à 20:09
- lucmars
Re : (resolu)Impossible de démarrer sur Ubuntu
le boot-info
boot-info-4ppa125 [20201205_1956]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdb.
=> Windows 7/8/2012 is installed in the MBR of /dev/sdc.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdd.
=> Windows 7/8/2012 is installed in the MBR of /dev/sde.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/grubx64.efi
/efi/Boot/mmx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/HP/BiosUpdate/CryptRSA.efi
/efi/HP/BiosUpdate/HpBiosMgmt.efi
/efi/HP/BiosUpdate/HpBiosUpdate.efi
/efi/HP/SystemDiags/CryptRSA.efi
/efi/HP/SystemDiags/HpSysDiags.efi
/efi/HP/SystemDiags/SystemDiags.efi
/efi/HP/SystemRecovery/bootmgfw.efi
/efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/BCD
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sde1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sde2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sde3: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/BOOT/fbx64.efi /efi/BOOT/grubx64.efi
/efi/BOOT/mmx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg
sde4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sde5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
================================ 2 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04.1 LTS CurrentSession on sde5
OS#2: Windows 8 or 10 on sda4
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-56-generic root=UUID=5ebca4e7-76dc-467c-84e0-c30018c305e9 ro quiet splash vt.handoff=7
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0002,0001,0004,0005
Boot0000* ubuntu HD(2,GPT,08d37f28-6a60-4f72-a65c-a7f8b3566e98,0x200000,0xb4000)/File(\EFI\ubuntu\shimx64.efi)
Boot0001* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0004* UEFI: IPv4 Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1c,0x6)/Pci(0x0,0x0)/MAC(2025647e4e11,0)/IPv4(0.0.0.00.0.0.0,0,0)..BO
Boot0005* UEFI: IPv6 Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1c,0x6)/Pci(0x0,0x0)/MAC(2025647e4e11,0)/IPv6([::]:<->[::]:,0,0)..BO
78415fb8fb9b909f8029858113f1335f sda2/Boot/bkpbootx64.efi
78415fb8fb9b909f8029858113f1335f sda2/Boot/bootx64.efi
2895d47544fd587b26c7e29be1295c27 sda2/Boot/fbx64.efi
e6b633dcac8b0c7cf5202f0198f852d8 sda2/Boot/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 sda2/Boot/mmx64.efi
8ed07d5ee4e5e1534bcf64037b7589ff sda2/ubuntu/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 sda2/ubuntu/mmx64.efi
78415fb8fb9b909f8029858113f1335f sda2/ubuntu/shimx64.efi
6488d391f74263c9da3c3d47dffa6212 sda2/HP/BiosUpdate/CryptRSA.efi
ae3a162786fc77b938d7745e4a869645 sda2/HP/BiosUpdate/HpBiosMgmt.efi
2343d8858faa0ade9385e4cb4dfaa72a sda2/HP/BiosUpdate/HpBiosUpdate.efi
6488d391f74263c9da3c3d47dffa6212 sda2/HP/SystemDiags/CryptRSA.efi
3f500f5e1e620a24cb3b9593d637c56a sda2/HP/SystemDiags/HpSysDiags.efi
96e954072e171b822af971b60902a1b5 sda2/HP/SystemDiags/SystemDiags.efi
bad97e7203aec2bd026403a7f70688b9 sda2/HP/SystemRecovery/bootmgfw.efi
8ee9a2af3728e3c77195e46920b6b329 sda2/Microsoft/Boot/bootmgfw.efi
ab7f511d143387e3f6d5b710fa567b08 sda2/Microsoft/Boot/bootmgr.efi
f7a57b08bc7c1c85417ae4cea582d1d4 sda8/ubuntu/shimx64.efi
7ac06cc534d41e22fdf5025a01a1bb8a sda8/Boot/bootx64.efi
78415fb8fb9b909f8029858113f1335f sde3/BOOT/bkpbootx64.efi
78415fb8fb9b909f8029858113f1335f sde3/BOOT/bootx64.efi
2895d47544fd587b26c7e29be1295c27 sde3/BOOT/fbx64.efi
8ed07d5ee4e5e1534bcf64037b7589ff sde3/BOOT/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 sde3/BOOT/mmx64.efi
8ed07d5ee4e5e1534bcf64037b7589ff sde3/ubuntu/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 sde3/ubuntu/mmx64.efi
78415fb8fb9b909f8029858113f1335f sde3/ubuntu/shimx64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sde : notGPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdc : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdd : notGPT, no-BIOSboot, has-noESP, usb-disk, not-mmc, no-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sde5 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda5 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda6 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda7 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda8 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdd1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sde1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sde2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sde3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sde5 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda6 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda7 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda8 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sde1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sde2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sde3 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sde5 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, customized, sde
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda4 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda5 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda6 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda7 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda8 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdb1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdb2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdc1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
sdd1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdd
sde1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sde
sde2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sde
sde3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sde
fdisk -l (filtered): ___________________________________________________________
Disk sda: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: E46425B7-CA26-4F8D-8680-643A7AF7B547
Start End Sectors Size Type
sda1 2048 2097151 2095104 1023M Windows recovery environment
sda2 2097152 2834431 737280 360M EFI System
sda3 2834432 3096575 262144 128M Microsoft reserved
sda4 3096576 1932474919 1929378344 920G Microsoft basic data
sda5 1932476416 1933621247 1144832 559M Windows recovery environment
sda6 1933623296 1934544895 921600 450M Windows recovery environment
sda7 1934544896 3880144895 1945600000 927.8G Microsoft basic data
sda8 3880146944 3907018751 26871808 12.8G Microsoft basic data
Disk sdb: 298.9 GiB, 320072933376 bytes, 625142448 sectors
Disk identifier: 0x24796452
Boot Start End Sectors Size Id Type
sdb1 2048 321299 319252 155.9M 7 HPFS/NTFS/exFAT
sdb2 321754 625137879 624816126 298G 7 HPFS/NTFS/exFAT
Disk sdc: 1.84 TiB, 2000365289472 bytes, 3906963456 sectors
Disk identifier: 0x74a996e4
Boot Start End Sectors Size Id Type
sdc1 2048 3906959359 3906957312 1.8T 7 HPFS/NTFS/exFAT
Disk sdd: 931.53 GiB, 1000204883968 bytes, 1953525164 sectors
Disk identifier: 0x7917a222
Boot Start End Sectors Size Id Type
sdd1 2048 1953521663 1953519616 931.5G 7 HPFS/NTFS/exFAT
Disk sde: 298.9 GiB, 320072933376 bytes, 625142448 sectors
Disk identifier: 0x0dd788d5
Boot Start End Sectors Size Id Type
sde1 2048 135601371 135599324 64.7G 7 HPFS/NTFS/exFAT
sde2 624087728 625138350 1050623 513M 7 HPFS/NTFS/exFAT
sde3 * 135602176 136652799 1050624 513M ef EFI (FAT-12/16/32)
sde4 136654846 624087039 487432194 232.4G 5 Extended
sde5 136654848 624087039 487432192 232.4G 83 Linux
Partition table entries are not in disk order.
parted -lm (filtered): _________________________________________________________
sda:2000GB:scsi:512:4096:gpt:ATA ST2000DM001-1ER1:;
1:1049kB:1074MB:1073MB:ntfs:Basic data partition:hidden, diag;
2:1074MB:1451MB:377MB:fat32:EFI system partition:boot, esp;
3:1451MB:1585MB:134MB::Microsoft reserved partition:msftres;
4:1585MB:989GB:988GB:ntfs:Basic data partition:msftdata;
5:989GB:990GB:586MB:ntfs::hidden, diag;
6:990GB:990GB:472MB:ntfs::hidden, diag;
7:990GB:1987GB:996GB:ntfs:Basic data partition:msftdata;
8:1987GB:2000GB:13.8GB:ntfs:Basic data partition:hidden, msftdata;
sdb:320GB:scsi:512:512:mac:Hitachi HTS543232L9A300:;
1:512B:1535B:1024B::partition map:;
2:154MB:165MB:10.5MB:hfs+:OneClick-Ready:;
sdc:2000GB:scsi:512:512:msdos:WD Elements 1078:;
1:1049kB:2000GB:2000GB:ntfs::;
sdd:1000GB:scsi:512:512:msdos:TOSHIBA External USB 3.0:;
1:1049kB:1000GB:1000GB:ntfs::;
sde:320GB:scsi:512:512:msdos:WD 3200BMV External:;
1:1049kB:69.4GB:69.4GB:ntfs::;
3:69.4GB:70.0GB:538MB:fat32::boot, esp;
4:70.0GB:320GB:250GB:::;
5:70.0GB:320GB:250GB:ext4::;
2:320GB:320GB:538MB:ntfs::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ntfs 70F2A480F2A44C62 e6aae55a-5f3c-4967-9491-db531e1adb4b Windows RE tools Basic data partition
├─sda2 vfat 62EC-7EFD 08d37f28-6a60-4f72-a65c-a7f8b3566e98 SYSTEM EFI system partition
├─sda3 2452efb4-b9b8-45d1-954c-a71b27c178b9 Microsoft reserved partition
├─sda4 ntfs 3C88DA9288DA49D2 120de5bf-303f-494a-bb69-42562f005699 Windows Basic data partition
├─sda5 ntfs 5C58E9F658E9CF38 d0d3b8b7-20a3-4b60-b04c-94da4f92c9e1
├─sda6 ntfs 54C42BFCC42BDF4C 26366ccb-0bfc-4f9a-800a-8a7fce8922ae
├─sda7 ntfs 502ED4042ED3E0D0 6c23c468-97e1-48eb-959b-8fb2311f64d2 Documents Basic data partition
└─sda8 ntfs 32849D15849CDCA3 b2f25b51-a705-4f78-9298-42ac76a8a952 Recovery Image Basic data partition
sdb
├─sdb1 ntfs 0E8E14ED0E8E14ED 24796452-01 i
└─sdb2 ntfs 9842511F42510402 24796452-02 LaCie
sdc
└─sdc1 ntfs E60CC40C0CC3D629 74a996e4-01
sdd
└─sdd1 ntfs 0E9C0E220E9C0E22 7917a222-01
sde
├─sde1 ntfs 0E2C166D0E2C166D 0dd788d5-01 j
├─sde2 ntfs 0E8F1BAA0E8F1BAA 0dd788d5-02 L
├─sde3 vfat 3DA0-B822 0dd788d5-03
├─sde4 0dd788d5-04
└─sde5 ext4 5ebca4e7-76dc-467c-84e0-c30018c305e9 0dd788d5-05
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 663.9M 35% /mnt/boot-sav/sda1
sda2 235.1M 34% /mnt/boot-sav/sda2
sda4 769.2G 16% /mnt/boot-sav/sda4
sda5 96.3M 83% /mnt/boot-sav/sda5
sda6 437.8M 3% /mnt/boot-sav/sda6
sda7 592.1G 36% /mnt/boot-sav/sda7
sda8 1.6G 87% /mnt/boot-sav/sda8
sdb1 145M 7% /media/christian/i
sdb2 216.4G 27% /media/christian/LaCie
sdc1 1022.8G 45% /media/christian/E60CC40C0CC3D629
sdd1 931.4G 0% /media/christian/0E9C0E220E9C0E22
sde1 64.6G 0% /media/christian/j
sde2 502.2M 2% /media/christian/L
sde3 501.3M 2% /mnt/boot-sav/sde3
sde5 205.1G 5% /
Mount options: __________________________________________________________________
sda1 ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda2 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda4 ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda5 ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda6 ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda7 ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda8 ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb1 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other
sdb2 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other
sdc1 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sdd1 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sde1 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sde2 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=1024
sde3 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sde5 rw,relatime,errors=remount-ro
===================== sda2/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 5ebca4e7-76dc-467c-84e0-c30018c305e9 root hd4,msdos5
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
===================== sde3/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 5ebca4e7-76dc-467c-84e0-c30018c305e9 root hd4,msdos5
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sde5/boot/grub/grub.cfg (filtered) ======================
Windows Boot Manager (sur sda2) osprober-efi-62EC-7EFD
### END /etc/grub.d/30_os-prober_proxy ###
Ubuntu 5ebca4e7-76dc-467c-84e0-c30018c305e9
Ubuntu, avec Linux 5.4.0-56-generic 5ebca4e7-76dc-467c-84e0-c30018c305e9
Ubuntu, avec Linux 5.4.0-26-generic 5ebca4e7-76dc-467c-84e0-c30018c305e9
UEFI Firmware Settings uefi-firmware
========================== sde5/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sde5 during installation
UUID=5ebca4e7-76dc-467c-84e0-c30018c305e9 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
/swapfile none swap sw 0 0
UUID=3DA0-B822 /boot/efi vfat defaults 0 1
======================= sde5/etc/default/grub (filtered) =======================
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
export GRUB_COLOR_NORMAL="light-gray/black"
export GRUB_COLOR_HIGHLIGHT="black/black"
export GRUB_MENU_PICTURE="/boot/grub/fonts/50389332531_6af06d4c7a_k2.jpg"
GRUB_FONT="/boot/grub/unicode.pf2"
==================== sde5: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
217,346393585 = 233,373913088 boot/grub/grub.cfg 2
72,337051392 = 77,671317504 boot/vmlinuz 1
69,063591003 = 74,156466176 boot/vmlinuz-5.4.0-26-generic 1
72,337051392 = 77,671317504 boot/vmlinuz-5.4.0-56-generic 1
69,063591003 = 74,156466176 boot/vmlinuz.old 1
100,021270752 = 107,397021696 boot/initrd.img 1
72,962608337 = 78,343004160 boot/initrd.img-5.4.0-26-generic 2
100,021270752 = 107,397021696 boot/initrd.img-5.4.0-56-generic 1
72,962608337 = 78,343004160 boot/initrd.img.old 2
===================== sde5: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 702 déc. 5 13:10 10_linux_proxy
-rwxr-xr-x 1 root root 198 déc. 5 13:10 30_os-prober_proxy
-rwxr-xr-x 1 root root 702 déc. 5 13:10 31_linux_proxy
-rwxr-xr-x 1 root root 42359 nov. 13 00:15 32_linux_zfs
-rwxr-xr-x 1 root root 12894 nov. 13 00:15 33_linux_xen
-rwxr-xr-x 1 root root 198 déc. 5 13:10 34_os-prober_proxy
-rwxr-xr-x 1 root root 1424 nov. 13 00:15 35_uefi-firmware
-rwxr-xr-x 1 root root 214 nov. 13 00:15 40_custom
-rwxr-xr-x 1 root root 216 nov. 13 00:15 41_custom
drwxr-xr-x 4 root root 4096 déc. 4 15:25 backup
drwxr-xr-x 2 root root 4096 déc. 4 15:25 bin
drwxr-xr-x 2 root root 4096 déc. 5 13:10 proxifiedScripts
======================== sde5/etc/grub.d/31_linux_proxy ========================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/linux' | /etc/grub.d/bin/grubcfg_proxy "+'Ubuntu'~af5321d8acaba351d099bc3788a12449~
-*
-#text
+'SUBMENU' as 'Options avancées pour Ubuntu'{+'Options avancées pour Ubuntu'/*, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.4.0-56-generic'~7fa99cb64cf0d02e6016a1c0a27c93b4~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.4.0-56-generic (recovery mode)'~954af5bd59d353d87f1365a382815786~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.4.0-26-generic'~c31f6d66077511bf379ee7ae0b726f2d~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.4.0-26-generic (recovery mode)'~b8dc5efecca0a6678f5f7029f96943ef~}
"
========================= sde5/etc/grub.d/32_linux_zfs =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2019 Canonical Ltd.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${pkgdatadir}/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
set -u
## Skip early if zfs utils isn't installed (instead of failing on first zpool list)
if ! `which zfs >/dev/null 2>&1`; then
exit 0
fi
imported_pools=""
MNTDIR="$(mktemp -d ${TMPDIR:-/tmp}/zfsmnt.XXXXXX)"
ZFSTMP="$(mktemp -d ${TMPDIR:-/tmp}/zfstmp.XXXXXX)"
machine="$(uname -m)"
case "${machine}" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="${machine}" ;;
esac
RC=0
on_exit() {
# Restore initial zpool import state
for pool in ${imported_pools}; do
zpool export "${pool}"
done
mountpoint -q "${MNTDIR}" && umount "${MNTDIR}" || true
rmdir "${MNTDIR}"
rm -rf "${ZFSTMP}"
exit "${RC}"
}
trap on_exit EXIT INT QUIT ABRT PIPE TERM
# List ONLINE and DEGRADED pools
import_pools() {
# We have to ignore zpool import output, as potentially multiple / will be available,
# and we need to autodetect all zpools this way with their real mountpoints.
local initial_pools="$(zpool list | awk '{if (NR>1) print $1}')"
local all_pools=""
local imported_pools=""
local err=""
set +e
err="$(zpool import -f -a -o cachefile=none -o readonly=on -N 2>&1)"
# Only print stderr if the command returned an error
# (it can echo "No zpool to import" with success, which we don't want)
if [ $? -ne 0 ]; then
echo "Some pools couldn't be imported and will be ignored:\n${err}" >&2
fi
set -e
all_pools="$(zpool list | awk '{if (NR>1) print $1}')"
for pool in ${all_pools}; do
if echo "${initial_pools}" | grep -wq "${pool}"; then
continue
fi
imported_pools="${imported_pools} ${pool}"
done
echo "${imported_pools}"
}
# List all the dataset with a root mountpoint
get_root_datasets() {
local pools="$(zpool list | awk '{if (NR>1) print $1}')"
for p in ${pools}; do
local rel_pool_root=$(zpool get -H altroot ${p} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root="/"
fi
zfs list -H -o name,canmount,mountpoint -t filesystem | grep -E '^'"${p}"'(\s|/[[:print:]]*\s)(on|noauto)\s'"${rel_pool_root}"'$' | awk '{print $1}'
done
}
# find if given datasets can be mounted for directory and return its path (snapshot or real path)
# $1 is our current dataset name
# $2 directory path we look for (cannot contains /)
# $3 is the temporary mount directory to use
# $4 is the optional snapshot name
# return path for directory (which can be a mountpoint)
validate_system_dataset() {
local dataset="$1"
local directory="$2"
local mntdir="$3"
local snapshot_name="$4"
local mount_path="${mntdir}/${directory}"
if ! zfs list "${dataset}" >/dev/null 2>&1; then
return
fi
if ! mount -o noatime,zfsutil -t zfs "${dataset}" "${mount_path}"; then
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset}@${snapshot_name}'. Ignoring"
return
fi
local candidate_path="${mount_path}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${dataset}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}"
fi
if [ -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
else
mountpoint -q "${mount_path}" && umount "${mount_path}" || true
fi
}
# Detect system directory relevant to the other, trying to find the ones associated on the current dataset or snapshot/
# System directory should be at most a direct child dataset of main datasets (no recursivity)
# We can fallback trying other zfs pools if no match has been found.
# $1 is our current dataset name (which can have @snapshot name)
# $2 directory path we look for (cannot contains /)
# $3 restrict_to_same_pool (true|false) force looking for dataset with the same basename in the current dataset pool only
# $4 is the temporary mount directory to use
# $5 is the optional etc directory (if not $2 is not etc itself)
# return path for directory (which can be a mountpoint)
get_system_directory() {
local dataset_path="$1"
local directory="$2"
local restrict_to_same_pool="$3"
local mntdir="$4"
local etc_dir="$5"
if [ -z "${etc_dir}" ]; then
etc_dir="${mntdir}/etc"
fi
local candidate_path="${mntdir}/${directory}"
# 1. Look for /etc/fstab first (which will mount even on top of non empty $directory)
local mounted_fstab_entry="false"
if [ -f "${etc_dir}/fstab" ]; then
mount_args=$(awk '/^[^#].*[ \t]\/'"${directory}"'[ \t]/ {print "-t", $3, $1}' "${etc_dir}/fstab")
if [ -n "${mount_args}" ]; then
mounted_fstab_entry="true"
mount -o noatime ${mount_args} "${candidate_path}" || mounted_fstab_entry="false"
fi
fi
# If directory isn't empty. Only count if coming from /etc/fstab. Will be
# handled below otherwise as we are interested in potential snapshots.
if [ "${mounted_fstab_entry}" = "true" -a -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2. Handle zfs case, which can be a snapshots.
local base_dataset_path="${dataset_path}"
local snapshot_name=""
# For snapshots we extract the parent dataset
if echo "${dataset_path}" | grep -q '@'; then
base_dataset_path=$(echo "${dataset_path}" | cut -d '@' -f1)
snapshot_name=$(echo "${dataset_path}" | cut -d '@' -f2)
fi
base_dataset_name="${base_dataset_path##*/}"
base_pool="$(echo "${base_dataset_path}" | cut -d'/' -f1)"
# 2.a) Look for child dataset included in base dataset, which needs to hold same snapshot if any
candidate_path=$(validate_system_dataset "${base_dataset_path}/${directory}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
# 2.b) Look for current dataset (which is already mounted as /)
candidate_path="${mntdir}/${directory}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${base_dataset_path}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}/${directory}"
fi
if [ -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2.c) Look for every datasets in every pool which isn't the current dataset which holds:
# - the same dataset name (last section) than our base_dataset_name
# - mountpoint=directory
# - canmount!=off
all_same_base_dataset_name="$(zfs list -H -t filesystem -o name,canmount | awk '/^[^ ]+\/'"${base_dataset_name}"'[ \t](on|noauto)/ {print $1}') "
# order by local pool datasets first
current_pool_same_base_datasets=""
other_pools_same_base_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_same_base_dataset_name}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_same_base_datasets="${current_pool_same_base_datasets} ${d}"
else
other_pools_same_base_datasets="${other_pools_same_base_datasets} ${d}"
fi
done
ordered_same_base_datasets="${current_pool_same_base_datasets} ${other_pools_same_base_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_same_base_datasets="${current_pool_same_base_datasets}"
fi
# now, loop over them
for d in ${ordered_same_base_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${candidate_dataset}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
# 2.d) If we didn't find anything yet: check for persistent datasets corresponding to our mountpoint, with canmount=on without any snapshot associated:
# Note: we go over previous datasets as well, but this is ok, as we didn't include them before.
all_mountable_datasets="$(zfs list -t filesystem -o name,canmount | awk '/^[^ ]+[ \t]+on/ {print $1}')"
# order by local pool datasets first
current_pool_datasets=""
other_pools_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_mountable_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_datasets="${current_pool_datasets} ${d}"
else
other_pools_datasets="${other_pools_datasets} ${d}"
fi
done
ordered_datasets="${current_pool_datasets} ${other_pools_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_datasets="${current_pool_datasets}"
fi
for d in ${ordered_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${d}" "${directory}" "${mntdir}" "")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset_path}'. Ignoring"
return
}
# Try our default layout bpool as a prefered layout (fast path)
# This is get_system_directory for boot optimized for our default installation layout
# $1 is our current dataset name (which can have @snapshot name)
# $2 is the temporary mount directory to use
# return path for directory (which can be a mountpoint) if found
try_default_layout_bpool() {
local root_dataset_path="$1"
local mntdir="$2"
dataset_basename="${root_dataset_path##*/}"
candidate_dataset="bpool/BOOT/${dataset_basename}"
dataset_properties="$(zfs get -H mountpoint,canmount ${candidate_dataset} | cut -f3 | paste -sd ' ')"
if [ -z "${dataset_properties}" ]; then
return
fi
rel_pool_root=$(zpool get -H altroot bpool | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
snapshot_name="${dataset_basename##*@}"
[ "${snapshot_name}" = "${dataset_basename}" ] && snapshot_name=""
if [ -z "${snapshot_name}" ]; then
if ! echo "${dataset_properties}" | grep -Eq "${rel_pool_root}/boot (on|noauto)"; then
return
fi
else
candidate_dataset=$(echo "${candidate_dataset}" | cut -d '@' -f1)
fi
validate_system_dataset "${candidate_dataset}" "boot" "${mntdir}" "${snapshot_name}"
}
# Return if secure boot is enabled on that system
is_secure_boot_enabled() {
if LANG=C mokutil --sb-state 2>/dev/null | grep -qi enabled; then
echo "true"
return
fi
echo "false"
return
}
# Given a filesystem or snapshot dataset, returns dataset|machine id|pretty name|last used
# $1 is dataset we want information from
# $2 is the temporary mount directory to use
get_dataset_info() {
local dataset="$1"
local mntdir="$2"
local base_dataset="${dataset}"
local etc_dir="${mntdir}/etc"
local is_snapshot="false"
# For snapshot we extract the parent dataset
if echo "${dataset}" | grep -q '@'; then
base_dataset=$(echo "${dataset}" | cut -d '@' -f1)
is_snapshot="true"
fi
mount -o noatime,zfsutil -t zfs "${base_dataset}" "${mntdir}"
# read machine-id/os-release from /etc
etc_dir=$(get_system_directory "${dataset}" "etc" "true" "${mntdir}" "")
if [ -z "${etc_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
umount "${mntdir}"
return
fi
machine_id=""
if [ -f "${etc_dir}/machine-id" ]; then
machine_id=$(cat "${etc_dir}/machine-id")
fi
# We have to use a random temporary id if we don't have any machine-id file or if this one is empty
# (mostly the case of new installations before first boot).
# Let's use the dataset name directly for this.
# Consequence is that all datasets are then separated.
if [ -z "${machine_id}" ]; then
machine_id="${dataset}"
fi
pretty_name=$(. "${etc_dir}/os-release" && echo "${PRETTY_NAME}")
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
# read available kernels from /boot
boot_dir="$(try_default_layout_bpool "${dataset}" "${mntdir}")"
if [ -z "${boot_dir}" ]; then
boot_dir=$(get_system_directory "${dataset}" "boot" "false" "${mntdir}" "${etc_dir}")
fi
if [ -z "${boot_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
umount "${mntdir}"
return
fi
initrd_list=""
kernel_list=""
list=$(find "${boot_dir}" -maxdepth 1 -type f -regex '.*/\(vmlinuz\|vmlinux\|kernel\)-.*')
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
if ! grub_file_is_not_garbage "${linux}" ; then
continue
fi
# Filters entry if efi/non efi.
# Note that for now we allow kernel without .efi.signed as those are signed kernel
# on ubuntu, loaded by the shim.
case "${linux}" in
*.efi.signed)
if [ "$(is_secure_boot_enabled)" = "false" ]; then
continue
fi
;;
esac
linux_basename=$(basename "${linux}")
linux_dirname=$(dirname "${linux}")
version=$(echo "${linux_basename}" | sed -e "s,^[^0-9]*-,,g")
alt_version=$(echo "${version}" | sed -e "s,\.old$,,g")
gettext_printf "Found linux image: %s in %s\n" "${linux_basename}" "${dataset}" >&2
initrd=""
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${linux_dirname}/${i}" ; then
initrd="$i"
break
fi
done
if test -z "${initrd}" ; then
grub_warn "Couldn't find any valid initrd for dataset ${dataset}."
continue
fi
gettext_printf "Found initrd image: %s in %s\n" "${initrd}" "${dataset}" >&2
rel_linux_dirname=$(make_system_path_relative_to_its_root "${linux_dirname}")
initrd_list="${initrd_list}|${rel_linux_dirname}/${initrd}"
kernel_list="${kernel_list}|${rel_linux_dirname}/${linux_basename}"
done
initrd_list="${initrd_list#|}"
kernel_list="${kernel_list#|}"
initrd_device=$(${grub_probe} --target=device "${boot_dir}" | head -1)
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
# We needed to look in / for snapshots on root dataset, umount there before zfs lazily unmount it
case "${boot_dir}" in /boot/.zfs/snapshot/*)
umount "${boot_dir}" || true
;;
esac
# for zsys snapshots: we want to know which kernel we successful last booted with
last_booted_kernel=$(zfs get -H com.ubuntu.zsys:last-booted-kernel "${dataset}" | awk '{print $3}')
# snapshot: last_used is dataset creation time
if [ "${is_snapshot}" = "true" ]; then
last_used="$(zfs get -pH creation "${dataset}" | awk -F '\t' '{print $3}')"
# otherwise, last_used is manually marked at boot/shutdown on a root dataset for zsys
else
# if current system, take current time
if zfs mount | awk '/[ \t]+\/$/ {print $1}' | grep -q ${dataset}; then
last_used=$(date +%s)
else
last_used=$(zfs get -H com.ubuntu.zsys:last-used "${dataset}" | awk '{print $3}')
# case of non zsys, or zsys without annotation, take /etc/machine-id stat (as we mounted with noatime).
# However, as systems can be relatime, if system is current mounted one, set current time (case of clone + reboot
# within the same d).
if [ "${last_used}" = "-" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/os-release")
if [ -f "${mntdir}/etc/machine-id" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/machine-id")
fi
fi
fi
fi
is_zsys=$(zfs get -H com.ubuntu.zsys:bootfs "${base_dataset}" | awk '{print $3}')
if [ -n "${initrd_list}" -a -n "${kernel_list}" ]; then
echo "${dataset}\t${is_zsys}\t${machine_id}\t${pretty_name}\t${last_used}\t${initrd_device}\t${initrd_list}\t${kernel_list}\t${last_booted_kernel}"
else
grub_warn "didn't find any valid initrd or kernel."
fi
umount "${mntdir}" || true
# We needed to look in / for snapshots on root dataset, umount the snapshot for etc before zfs lazily unmount it
case "${etc_dir}" in /.zfs/snapshot/*/etc)
snapshot_path="$(findmnt -n -o TARGET -T ${etc_dir})"
umount "${snapshot_path}" || true
;;
esac
}
# Scan available boot options and returns in a formatted list
# $1 is the temporary mount directory to use
bootlist() {
local mntdir="$1"
local boot_list=""
for dataset in $(get_root_datasets); do
# get information from current root dataset
boot_list="${boot_list}$(get_dataset_info ${dataset} ${mntdir})\n"
# get information from snapshots of this root dataset
for snapshot_dataset in $(zfs list -H -o name -t snapshot "${dataset}"); do
boot_list="${boot_list}$(get_dataset_info ${snapshot_dataset} ${mntdir})\n"
done
done
echo "${boot_list}"
}
# Order machine ids by last_used from their main entry
get_machines_sorted() {
local bootlist="$1"
local machineids="$(echo "${bootlist}" | awk '{print $3}' | sort -u)"
for machineid in ${machineids}; do
echo "${bootlist}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print $5, $3}' | sort -nr | grep -E "[^^]\b${machineid}\b" | head -1
done | sort -nr | awk '{print $2}'
}
# Sort entries by last_used for a given machineid
sort_entries_for_machineid() {
local bootlist="$1"
local machineid="$2"
tab="$(printf '\t')"
echo "${bootlist}" | grep -E "[^^]\b${machineid}\b" | sort -k5,5r -k1,1 -t "${tab}"
}
# Return main entry index
get_main_entry() {
local entries="$1"
echo "${entries}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print}' | head -1
}
# Return specific field at index from entry
get_field_from_entry() {
local entry="$1"
local index="$2"
echo "${entry}" | awk "BEGIN{FS=\"\t\"} {print \$$index}"
}
# Get the main entry metadata
main_entry_meta() {
local main_entry="$1"
initrd=$(get_field_from_entry "${main_entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${main_entry}" 8 | cut -d'|' -f1)
# Take first element (most recent entry) which is not a snapshot
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"main\", \$4, \$1, \$6, \"$initrd\", \"$kernel\"}"
}
# Get advanced entries metadata
advanced_entries_meta() {
local main_entry="$1"
last_used_kernel="$(get_field_from_entry "${main_entry}" 9 )"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
set -- $(get_field_from_entry "${main_entry}" 7 | tr "|" " ")
for kernel in $(get_field_from_entry "${main_entry}" 8 | tr "|" " "); do
# get initrd and pop to the next one
initrd="$1"; shift
was_last_used_kernel="false"
kernel_basename=$(basename "${kernel}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
was_last_used_kernel="true"
fi
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"advanced\", \$4, \$1, \$6, \"$initrd\", \"$kernel\", \"$was_last_used_kernel\"}"
done
}
# Get history metadata
history_entries_meta() {
local entries="$1"
local main_dataset_name="$2"
local main_dataset_releasename="$3"
if [ -z "${entries}" ]; then
return
fi
# Traverse snapshots and clones
echo "${entries}" | while read entry; do
name=""
# Compute snapshot/filesystem dataset name
snap_dataset_name="$(get_field_from_entry "${entry}" 1)"
snapname="${snap_dataset_name##*@}"
# If, this is a clone, take what is after main_dataset_name
if [ "${snapname}" = "${snap_dataset_name}" ]; then
snapname="${snap_dataset_name##${main_dataset_name}_}"
# Handle manual user clone (not prefixed by "main_dataset_name")
snapname="${snapname##*/}"
fi
# We keep the snapname only if it is not only a zsys auto snapshot
if echo "${snapname}" | grep -q "^autozsys_"; then
snapname=""
fi
# We store the release only if it different from main dataset release (snapshot before a release upgrade)
releasename=$(get_field_from_entry "${entry}" 4)
if [ "${releasename}" = "${main_dataset_releasename}" ]; then
releasename=""
fi
# Snapshot date
foo="$(get_field_from_entry "${entry}" 5)"
snapdate="$(date -d @$(get_field_from_entry "${entry}" 5) "+%x @ %H:%M")"
# For snapshots/clones the name can have the following formats:
# <DATE>: autozsys, same release
# <OLD_RELEASE> on <DATE>: autozsys, different release
# <SNAPNAME> on <DATE>: Manual snapshot, same release
# <SNAPNAME>, <OLD_RELEASE> on <DATE>: Manual snapshot, different release
if [ "${snapname}" = "" -a "${releasename}" = "" ]; then
name="${snapdate}"
elif [ "${snapname}" = "" -a "${releasename}" != "" ]; then
name=$(gettext_printf "%s on %s" "${releasename}" "${snapdate}")
elif [ "${snapname}" != "" -a "${releasename}" = "" ]; then
name=$(gettext_printf "%s on %s" "${snapname}" "${snapdate}")
else # snapname != "" && releasename != ""
name=$(gettext_printf "%s, %s on %s" "${snapname}" "${releasename}" "${snapdate}")
fi
# Choose kernel and initrd if the snapshot was booted successfully on a specific kernel before
# Take latest by default if no match
initrd=$(get_field_from_entry "${entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${entry}" 8 | cut -d'|' -f1)
last_used_kernel="$(get_field_from_entry "${entry}" 9)"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
set -- $(get_field_from_entry "${entry}" 7 | tr "|" " ")
for k in $(get_field_from_entry "${entry}" 8|tr "|" " "); do
# get initrd and pop to the next one
candidate_initrd="$1"; shift
kernel_basename=$(basename "${k}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
kernel="${k}"
initrd="${candidate_initrd}"
break
fi
done
echo "${entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"history\", \"$name\", \$1, \$6, \"$initrd\", \"$kernel\"}"
done
}
# Generate metadata from a BOOTLIST that will subsequently used to generate
# the final grub menu entries
generate_grub_menu_metadata() {
local bootlist="$1"
# Sort machineids by last_used from their main entry
for machineid in $(get_machines_sorted "${bootlist}"); do
entries="$(sort_entries_for_machineid "${bootlist}" ${machineid})"
main_entry="$(get_main_entry "${entries}")"
if [ -z "$main_entry" ]; then
continue
fi
main_entry_meta "${main_entry}"
advanced_entries_meta "${main_entry}"
main_dataset_name="$(get_field_from_entry "${main_entry}" 1)"
main_dataset_releasename="$(get_field_from_entry "${main_entry}" 4)"
# grep -v errcode != 0 if there is no match. || true to not fail with -e
other_entries="$(echo "${entries}" | grep -v "${main_entry}" || true)"
history_entries_meta "${other_entries}" "${main_dataset_name}" "${main_dataset_releasename}"
done
}
# Print the configuration part common to all sections
# Note:
# If 10_linux runs these part will be defined twice in grub configuration
print_menu_prologue() {
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "${vt_handoff}" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
GRUB_GFXPAYLOAD_LINUX="${GRUB_GFXPAYLOAD_LINUX:-}"
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 0 ]; then
echo "set linux_gfx_mode=${GRUB_GFXPAYLOAD_LINUX}"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
}
# Cache for prepare_grub_to_access_device call
# $1: boot_device
# $2: submenu_level
prepare_grub_to_access_device_cached() {
local boot_device="$1"
local submenu_level="$2"
local boot_device_idx="$(echo ${boot_device} | tr '/' '_')"
cache_file="${ZFSTMP}/$(echo boot_device${boot_device_idx})"
if [ ! -f "${cache_file}" ]; then
set +u
echo "$(prepare_grub_to_access_device "${boot_device}")" > "${cache_file}"
set -u
for i in 0 1 2; do
submenu_indentation="$(printf %${i}s | tr " " "${grub_tab}")"
sed "s/^/${submenu_indentation} /" "${cache_file}" > "${cache_file}--${i}"
done
fi
cat "${cache_file}--${submenu_level}"
}
# Print a grub menu entry
zfs_linux_entry () {
submenu_level="$1"
title="$2"
type="$3"
dataset="$4"
boot_device="$5"
initrd="$6"
kernel="$7"
kernel_version="$8"
kernel_additional_args="${9:-}"
boot_devices="${10:-}"
submenu_indentation="$(printf %${submenu_level}s | tr " " "${grub_tab}")"
echo "${submenu_indentation}menuentry '$(echo "${title}" | grub_quote)' ${CLASS} \${menuentry_id_option} 'gnulinux-${dataset}-${kernel_version}' {"
if [ "${quick_boot}" = 1 ]; then
echo "${submenu_indentation} recordfail"
fi
if [ "${type}" != "recovery" ] ; then
GRUB_SAVEDEFAULT=${GRUB_SAVEDEFAULT:-}
default_entry="$(save_default_entry)"
if [ -n "${default_entry}" ]; then
echo "${submenu_indentation} ${default_entry}"
fi
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "${GRUB_GFXPAYLOAD_LINUX}" = "" ]; then
echo "${submenu_indentation} load_video"
else
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "text" ]; then
echo "${submenu_indentation} load_video"
fi
fi
if ([ "${ubuntu_recovery}" = 0 ] || [ "${type}" != "recovery" ]) && \
([ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 1 ]); then
echo "${submenu_indentation} gfxmode \${linux_gfx_mode}"
fi
echo "${submenu_indentation} insmod gzio"
echo "${submenu_indentation} if [ \"\${grub_platform}\" = xen ]; then insmod xzio; insmod lzopio; fi"
if [ -n "$boot_devices" ]; then
for device in ${boot_devices}; do
echo "${submenu_indentation} if [ "${boot_device}" = "${device}" ]; then"
echo "$(prepare_grub_to_access_device_cached "${device}" $(( submenu_level +1 )) )"
echo "${submenu_indentation} fi"
done
else
echo "$(prepare_grub_to_access_device_cached "${boot_device}" "${submenu_level}")"
fi
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo $(gettext_printf "Loading Linux %s ..." ${kernel_version} | grub_quote)"
fi
linux_default_args="${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ ${type} = "recovery" ]; then
linux_default_args="${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
echo "${submenu_indentation} linux ${kernel} root=ZFS=${dataset} ro ${linux_default_args} ${kernel_additional_args}"
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo '$(gettext_printf "Loading initial ramdisk ..." | grub_quote)'"
fi
echo "${submenu_indentation} initrd ${initrd}"
echo "${submenu_indentation}}"
}
# Generate a GRUB Menu from menu meta data
# $1 menu metadata
generate_grub_menu() {
local menu_metadata="$1"
local last_section=""
local main_dataset_name=""
local main_dataset=""
local have_zsys=""
if [ -z "${menu_metadata}" ]; then
return
fi
CLASS="--class gnu-linux --class gnu --class os"
if [ "${GRUB_DISTRIBUTOR}" = "" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1 | LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "${ubuntu_recovery}" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} nomodeset"
fi
case "$GENKERNEL_ARCH" in
x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
esac
if [ "${vt_handoff}" = 1 ]; then
for word in ${GRUB_CMDLINE_LINUX_DEFAULT}; do
if [ "${word}" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_DEFAULT} \${vt_handoff}"
fi
done
fi
print_menu_prologue
cat<<'EOF'
function zsyshistorymenu {
# $1: root dataset (eg rpool/ROOT/ubuntu_2zhm07@autozsys_k56fr6)
# $2: boot device id (eg 411f29ce1557bfed)
# $3: initrd (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/initrd.img-5.4.0-21-generic)
# $4: kernel (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/vmlinuz-5.4.0-21-generic)
# $5: kernel_version (eg 5.4.0-21-generic)
set root_dataset="${1}"
set boot_device="${2}"
set initrd="${3}"
set kernel="${4}"
set kversion="${5}"
EOF
boot_devices=$(echo "${menu_metadata}" | cut -d"$(printf '\t')" -f6 | sort -u)
title=$(gettext_printf "Revert system only")
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data")"
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "Revert system only (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
fi
echo "}"
echo
# IFS is set to TAB (ASCII 0x09)
echo "${menu_metadata}" |
{
at_least_one_entry=0
have_zsys="$(which zsysd || true)"
while IFS="$(printf '\t')" read -r machineid iszsys section name dataset device initrd kernel opt; do
# Disable history for non zsys system or if systems is a zsys one and zsys isn't installed.
# In pure zfs systems, we identified multiple issues due to the mount generator
# in upstream zfs which makes it incompatible. Don't show history for now.
if [ "${section}" = "history" ]; then
if [ "${iszsys}" != "yes" ] || [ "${iszsys}" = "yes" -a -z "${have_zsys}" ]; then
continue
fi
fi
if [ "${last_section}" != "${section}" -a -n "${last_section}" ]; then
# Close previous section wrapper
if [ "${last_section}" != "main" ]; then
echo "}" # Add grub_tabs
at_least_one_entry=0
fi
fi
case "${section}" in
main)
title="${name}"
main_dataset_name="${name}"
main_dataset="${dataset}"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
zfs_linux_entry 0 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
at_least_one_entry=1
;;
advanced)
# normal and recovery entries for a given kernel
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "Advanced options for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-advanced-${main_dataset}' {"
fi
last_booted_kernel_marker=""
if [ "${opt}" = "true" ]; then
last_booted_kernel_marker="* "
fi
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
title="$(gettext_printf "%s%s, with Linux %s" "${last_booted_kernel_marker}" "${name}" "${kernel_version}")"
zfs_linux_entry 1 "${title}" "advanced" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY=${GRUB_DISABLE_RECOVERY:-}
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "%s%s, with Linux %s (%s)" "${last_booted_kernel_marker}" "${name}" "${kernel_version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
at_least_one_entry=1
;;
history)
# Revert to a snapshot
# revert system, revert system and user data and associated recovery entries
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "History for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-history-${main_dataset}' {"
fi
if [ "${iszsys}" = "yes" ]; then
title="$(gettext_printf "Revert to %s" "${name}" | grub_quote)"
else
title="$(gettext_printf "Boot on %s" "${name}" | grub_quote)"
fi
echo " submenu '${title}' \${menuentry_id_option} 'gnulinux-history-${dataset}' {"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
# Zsys only: let revert system without destroying snapshots
if [ "${iszsys}" = "yes" ]; then
echo "${grub_tab}${grub_tab}zsyshistorymenu" \"${dataset}\" \"${device}\" \"${initrd}\" \"${kernel}\" \"${kernel_version}\"
# Non-zsys: boot temporarly on snapshots or rollback (destroying intermediate snapshots)
else
title="$(gettext_printf "One time boot")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "One time boot (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 2 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
title="$(gettext_printf "Revert system (all intermediate snapshots will be destroyed)")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}" "rollback=yes"
fi
echo " }"
at_least_one_entry=1
;;
*)
grub_warn "unknown section: ${section}. Ignoring entry ${name} for ${dataset}"
;;
esac
last_section="${section}"
done
if [ "${at_least_one_entry}" -eq 1 ]; then
echo "}"
fi
}
}
# don't add trailing newline of variable is empty
# $1: content to write
# $2: destination file
trailing_newline_if_not_empty() {
content="$1"
dest="$2"
if [ -z "${content}" ]; then
rm -f "${dest}"
touch "${dest}"
return
fi
echo "${content}" > "${dest}"
}
GRUB_LINUX_ZFS_TEST="${GRUB_LINUX_ZFS_TEST:-}"
case "${GRUB_LINUX_ZFS_TEST}" in
bootlist)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
boot_list="$(bootlist ${MNTDIR})"
trailing_newline_if_not_empty "${boot_list}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
metamenu)
boot_list="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
trailing_newline_if_not_empty "${menu_metadata}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
grubmenu)
menu_metadata="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
grub_menu=$(generate_grub_menu "${menu_metadata}")
trailing_newline_if_not_empty "${grub_menu}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
*)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
# Generate the complete list of boot entries
boot_list="$(bootlist ${MNTDIR})"
# Create boot menu meta data from the list of boot entries
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
# Create boot menu meta data from the list of boot entries
grub_menu="$(generate_grub_menu "${menu_metadata}")"
if [ -n "${grub_menu}" ]; then
# We want the trailing newline as a marker will be added
echo "${grub_menu}"
fi
;;
esac
========================= sde5/etc/grub.d/33_linux_xen =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os --class xen"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
# Default to disabling partition uuid support to maintian compatibility with
# older kernels.
GRUB_DISABLE_LINUX_PARTUUID=${GRUB_DISABLE_LINUX_PARTUUID-true}
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if ( [ "x${GRUB_DEVICE_UUID}" = "x" ] && [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] ) \
|| ( [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
&& [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ] ) \
|| ( ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
&& ! test -e "/dev/disk/by-partuuid/${GRUB_DEVICE_PARTUUID}" ) \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
elif [ "x${GRUB_DEVICE_UUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ]; then
LINUX_ROOT_DEVICE=PARTUUID=${GRUB_DEVICE_PARTUUID}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
# Allow overriding GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT.
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE}" ]; then
GRUB_CMDLINE_LINUX="${GRUB_CMDLINE_LINUX_XEN_REPLACE}"
fi
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}"
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
linux_entry ()
{
os="$1"
version="$2"
xen_version="$3"
type="$4"
args="$5"
xen_args="$6"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
if [ x$type = xrecovery ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
elif [ "${type#init-}" != "$type" ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "${type#init-}")"
else
title="$(gettext_printf "%s, with Xen %s and Linux %s" "${os}" "${xen_version}" "${version}")"
fi
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
if [ x"Xen ${xen_version}>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
title="$(gettext_printf "%s, with Xen hypervisor" "${os}")"
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab | sed "s/^/$submenu_indentation/"
fi
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})"
lmessage="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$xmessage" | grub_quote)'
if [ "\$grub_platform" = "pc" -o "\$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
${xen_loader} ${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} \${xen_rm_opts}
echo '$(echo "$lmessage" | grub_quote)'
${module_loader} ${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}" ; then
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
message="$(gettext_printf "Loading initial ramdisk ...")"
initrd_path=
for i in ${initrd}; do
initrd_path="${initrd_path} ${rel_dirname}/${i}"
done
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
${module_loader} --nounzip $(echo $initrd_path)
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
linux_list=
for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* /boot/kernel-*; do
if grub_file_is_not_garbage "$i"; then
basename=$(basename $i)
version=$(echo $basename | sed -e "s,^[^0-9]*-,,g")
dirname=$(dirname $i)
config=
for j in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${j}" ; then
config="${j}"
break
fi
done
if (grep -qx "CONFIG_XEN_DOM0=y" "${config}" 2> /dev/null || grep -qx "CONFIG_XEN_PRIVILEGED_GUEST=y" "${config}" 2> /dev/null); then linux_list="$linux_list $i" ; fi
fi
done
if [ "x${linux_list}" = "x" ] ; then
exit 0
fi
file_is_not_sym () {
case "$1" in
*/xen-syms-*)
return 1;;
*)
return 0;;
esac
}
xen_list=
for i in /boot/xen*; do
if grub_file_is_not_garbage "$i" && file_is_not_sym "$i" ; then xen_list="$xen_list $i" ; fi
done
prepare_boot_cache=
boot_device_id=
title_correction_code=
machine=`uname -m`
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
while [ "x${xen_list}" != "x" ] ; do
list="${linux_list}"
current_xen=`version_find_latest $xen_list`
xen_basename=`basename ${current_xen}`
xen_dirname=`dirname ${current_xen}`
rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname`
xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"`
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ "x$is_top_level" != xtrue ]; then
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
fi
if ($grub_file --is-arm64-efi $current_xen); then
xen_loader="xen_hypervisor"
module_loader="xen_module"
else
if ($grub_file --is-x86-multiboot2 $current_xen); then
xen_loader="multiboot2"
module_loader="module2"
else
xen_loader="multiboot"
module_loader="module"
fi
fi
initrd_early=
for i in ${GRUB_EARLY_INITRD_LINUX_STOCK} \
${GRUB_EARLY_INITRD_LINUX_CUSTOM}; do
if test -e "${xen_dirname}/${i}" ; then
initrd_early="${initrd_early} ${i}"
fi
done
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd_real=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}" ; do
if test -e "${dirname}/${i}" ; then
initrd_real="$i"
break
fi
done
initrd=
if test -n "${initrd_early}" || test -n "${initrd_real}"; then
initrd="${initrd_early} ${initrd_real}"
initrd_display=
for i in ${initrd}; do
initrd_display="${initrd_display} ${dirname}/${i}"
done
gettext_printf "Found initrd image: %s\n" "$(echo $initrd_display)" >&2
fi
if test -z "${initrd_real}"; then
# "UUID=" magic is parsed by initrds. Since there's no initrd, it can't work here.
if [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ]; then
linux_root_device_thisversion=${GRUB_DEVICE}
else
linux_root_device_thisversion=PARTUUID=${GRUB_DEVICE_PARTUUID}
fi
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS}" "${version}" "${xen_version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
submenu_indentation="$grub_tab$grub_tab"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
is_top_level=false
fi
linux_entry "${OS}" "${version}" "${xen_version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
for supported_init in ${SUPPORTED_INITS}; do
init_path="${supported_init#*:}"
if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" "init-${supported_init%%:*}" \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
fi
done
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" recovery \
"single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}"
fi
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
if [ x"$is_top_level" != xtrue ]; then
echo ' }'
fi
xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
====================== sde5/etc/grub.d/34_os-prober_proxy ======================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/os-prober' | /etc/grub.d/bin/grubcfg_proxy "-'Windows Boot Manager (sur /dev/sda2)'~2c9af2afb335f5fcf2803fd609e8c758~
+*
+#text
"
======================= sde5/etc/grub.d/35_uefi-firmware =======================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2012 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
. "${datarootdir}/grub/grub-mkconfig_lib"
efi_vars_dir=/sys/firmware/efi/vars
EFI_GLOBAL_VARIABLE=8be4df61-93ca-11d2-aa0d-00e098032b8c
OsIndications="$efi_vars_dir/OsIndicationsSupported-$EFI_GLOBAL_VARIABLE/data"
if [ -e "$OsIndications" ] && \
[ "$(( $(printf 0x%x \'"$(cat $OsIndications | cut -b1)") & 1 ))" = 1 ]; then
LABEL="UEFI Firmware Settings"
gettext_printf "Adding boot menu entry for UEFI Firmware Settings\n" >&2
onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
cat << EOF
menuentry '$LABEL' \$menuentry_id_option 'uefi-firmware' {
fwsetup
}
EOF
fi
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown MBR on /dev/sdb
00000000 45 52 02 00 00 05 38 da 00 00 00 00 00 00 00 00 |ER....8.........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 00 00 00 00 31 43 6c 6b 52 64 79 24 00 00 00 20 |....1ClkRdy$... |
000001c0 21 00 07 fe 3f 13 00 08 00 00 14 df 04 00 00 07 |!...?...........|
000001d0 0e 14 07 fe ff ff da e8 04 00 fe ef 3d 25 00 00 |............=%..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
/dev/sda1: unknown GPT attributes
8000000000000001
/dev/sda2: unknown GPT attributes
8000000000000000
/dev/sda3: unknown GPT attributes
8000000000000000
/dev/sda5: unknown GPT attributes
8000000000000001
Unknown BootLoader on sde4
00000000 65 58 37 69 76 39 77 49 39 4c 31 46 38 38 6c 6b |eX7iv9wI9L1F88lk|
00000010 38 52 31 58 2b 61 4f 59 37 67 45 31 6a 63 58 78 |8R1X+aOY7gE1jcXx|
00000020 52 79 47 6c 32 39 65 6f 4b 5a 49 69 0d 0a 68 6c |RyGl29eoKZIi..hl|
00000030 76 71 76 57 2b 58 4c 44 6c 6c 2b 46 31 39 53 4f |vqvW+XLDll+F19SO|
00000040 57 56 6a 79 4f 79 7a 71 2f 4b 65 35 54 6c 30 74 |WVjyOyzq/Ke5Tl0t|
00000050 48 76 57 37 4c 4d 55 48 56 30 77 73 6f 72 4e 46 |HvW7LMUHV0wsorNF|
00000060 61 33 64 44 57 74 64 45 47 38 4e 36 33 61 68 4c |a3dDWtdEG8N63ahL|
00000070 72 74 4b 69 4b 7a 0d 0a 55 6f 66 4c 46 54 34 55 |rtKiKz..UofLFT4U|
00000080 51 7a 67 76 54 4d 74 74 53 4c 72 4b 59 32 2f 68 |QzgvTMttSLrKY2/h|
00000090 68 73 6f 69 31 62 37 41 53 67 31 6b 47 74 46 6c |hsoi1b7ASg1kGtFl|
000000a0 69 41 65 4d 4d 4f 79 67 74 68 46 70 43 47 56 63 |iAeMMOygthFpCGVc|
000000b0 61 44 6c 32 46 45 4f 47 49 46 53 79 67 34 62 66 |aDl2FEOGIFSyg4bf|
000000c0 0d 0a 67 73 45 6d 73 75 48 76 52 61 30 52 59 54 |..gsEmsuHvRa0RYT|
000000d0 32 44 56 71 55 57 31 4b 49 34 6c 6a 68 42 44 4c |2DVqUW1KI4ljhBDL|
000000e0 68 56 52 46 76 42 51 4d 31 6e 45 42 50 57 6f 46 |hVRFvBQM1nEBPWoF|
000000f0 52 37 2f 4f 38 4b 45 4e 79 37 33 74 58 31 4a 74 |R7/O8KENy73tX1Jt|
00000100 76 38 31 65 32 2b 6e 57 70 7a 0d 0a 56 53 71 57 |v81e2+nWpz..VSqW|
00000110 37 70 59 38 79 70 53 71 55 58 56 42 64 4b 6c 72 |7pY8ypSqUXVBdKlr|
00000120 55 76 74 6a 76 6f 4a 73 43 4b 42 2f 45 41 74 30 |UvtjvoJsCKB/EAt0|
00000130 4a 71 42 71 58 30 36 72 6c 43 70 32 6c 76 56 33 |JqBqX06rlCp2lvV3|
00000140 68 62 32 38 79 38 56 39 69 35 6d 52 4e 74 6f 36 |hb28y8V9i5mRNto6|
00000150 57 36 72 56 0d 0a 69 62 55 74 64 4d 43 73 54 65 |W6rV..ibUtdMCsTe|
00000160 44 77 38 77 74 53 78 73 6c 6d 42 59 4d 79 54 6c |Dw8wtSxslmBYMyTl|
00000170 65 7a 76 47 73 64 4e 71 78 4e 33 6d 48 76 38 6e |ezvGsdNqxN3mHv8n|
00000180 4c 45 79 65 58 61 4c 74 74 33 67 56 69 79 75 79 |LEyeXaLtt3gViyuy|
00000190 69 64 46 65 6c 42 63 7a 4e 72 75 55 6c 43 0d 0a |idFelBczNruUlC..|
000001a0 31 42 76 7a 6d 69 46 45 66 6c 52 63 68 2b 4a 7a |1BvzmiFEflRch+Jz|
000001b0 64 71 47 6d 4e 6d 6d 64 69 7a 50 33 36 48 00 fe |dqGmNmmdizP36H..|
000001c0 ff ff 83 fe ff ff 02 00 00 00 00 a0 0d 1d 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive ==========
sdf
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of
sde5,
using the following options: sde3/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.1 LTS CurrentSession entry (sde3/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)Gaulois Matter !
Hors ligne
#11 Le 05/12/2020, à 20:20
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Quel est le problème ?
Hors ligne
#12 Le 05/12/2020, à 20:51
- lucmars
Re : (resolu)Impossible de démarrer sur Ubuntu
Le problème est que je suis le mauvais cheval pour ton cas; mais je ne suis pas seul ici.
T'as plus d'un disque, au plus 5 ; rien d'anormal. Par contre niveau grub, sembles que t'ais créé des fichiers custom, est-ce exact ?
Gaulois Matter !
Hors ligne
#13 Le 06/12/2020, à 07:11
- ikewdu
Re : (resolu)Impossible de démarrer sur Ubuntu
Salut,
Si tu tapotes F9 au démarrage, peux-tu me dire ce qui s'affiche ? Car, hormis une mauvaise partition efi montée en fstab, je ne vois pas de raison significative pour expliquer ce GRUB inopérant. Trois choses tout de même :
Comme l'installation en mode uefi sur sdc (qui est un disque msdos) est un peu foireuse, peut-être pourrais-tu déjà refaire cette installation proprement.... On verrait peut-être une évolution : disque gpt + uefi.
Idem pour sdb que tu pourrais débrancher, car il contient, selon le rapport, un boot-loader inconnu. C'est peut-être lui qui met le bazar si le PC démarre en Legacy en priorité, et que l'uefi se lance dans un second temps.
Enfin, tu as utilisé un logiciel tiers (grub-customizer ?) qui a laissé des traces de scripts. C'est peut-être lui le responsable.
Hors ligne
#14 Le 06/12/2020, à 09:35
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Comment savoir à quel disque physique correspond le sdb ?
Et F9 c'est quand j'allume le PC (comme quand je fais F10 pour accéder au Bios) ?
Hors ligne
#15 Le 06/12/2020, à 21:16
- ikewdu
Re : (resolu)Impossible de démarrer sur Ubuntu
Re,
sdb:320GB:scsi:512:512:mac:Hitachi HTS543232L9A300:;Pour F9, c'est en effet au démarrage.
Hors ligne
#16 Le 07/12/2020, à 09:00
- malbo
Re : (resolu)Impossible de démarrer sur Ubuntu
Chanchris a écrit :
Si je fais un tour dans le bios au préalable, pas d'écran noir, le menu de boot s'affiche.
Le chargeur d'amorçage qui est utilisé se trouve sur le disque dur interne sda. On peut voir ça dans cet extrait :
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0002,0001,0004,0005
Boot0000* ubuntu HD(2,GPT,08d37f28-6a60-4f72-a65c-a7f8b3566e98,0x200000,0xb4000)/File(\EFI\ubuntu\shimx64.efi)
Boot0001* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0004* UEFI: IPv4 Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1c,0x6)/Pci(0x0,0x0)/MAC(2025647e4e11,0)/IPv4(0.0.0.00.0.0.0,0,0)..BO
Boot0005* UEFI: IPv6 Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1c,0x6)/Pci(0x0,0x0)/MAC(2025647e4e11,0)/IPv6([::]:<->[::]:,0,0)..BOOn peut voir que le "BootCurrent" correspond bien à l'entrée "ubuntu", laquelle pointe vers 08d37f28-6a60-4f72-a65c-a7f8b3566e98 qui est l’identifiant PARTUUID de la partition sda2. Ce chargeur d'amorçage doit rechercher la partition racine de Ubuntu qui se trouve sur le disque dur externe sde.
Quand tu fais un démarrage normal sans faire un tour dans le Bios, le disque dur externe sde n'est pas encore opérationnel, ce qui fait que le chargeur d'amorçage de Grub déclare forfait et que tu obtiens l'écran noir avec une ligne "grub>"
Par contre, en faisant un tour par le Bios, tu laisses le temps au disque externe sde de s'établir.
Cela étant, je n'ai pas de solution à proposer si ce n'est de presser la touche F9 au démarrage quand tu dois démarrer sur Ubuntu : ainsi, ça laisse le temps au disque dur externe de s'établir et tu peux démarrer sur l'entrée "ubuntu" sans problème.
Dernière modification par malbo (Le 07/12/2020, à 09:05)
Hors ligne
#17 Le 07/12/2020, à 09:15
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
C'est donc le disque dur externe sde qui n'est pas assez rapide ?
Quand j'appuie sur F9 au démarrage j'ai un écran qui me demande de confirmer le disque sur lequel demarrer.
Si je démarre sur ubuntu et que je choisis alors Windows dans le menu Grub, je constate lors d'un prochain démarrage que l'ordre est changé dans le bios et que Windows boot manager est alors en premier. Si je ne remodifie pas l'ordre le pc démarre directement sur Windows sans menu Grub. Pourquoi cela ?
Hors ligne
#18 Le 07/12/2020, à 09:30
- malbo
Re : (resolu)Impossible de démarrer sur Ubuntu
Chanchris a écrit :
Quand j'appuie sur F9 au démarrage j'ai un écran qui me demande de confirmer le disque sur lequel demarrer.
Ce n'est pas exact : l'écran demande sur quelle entrée démarrer et non pas sur quel disque démarrer. Toi tu sélectionnes l'entrée "ubuntu" pour démarrer dessus.
Chanchris a écrit :
Si je démarre sur ubuntu et que je choisis alors Windows dans le menu Grub, je constate lors d'un prochain démarrage que l'ordre est changé dans le bios et que Windows boot manager est alors en premier. Si je ne remodifie pas l'ordre le pc démarre directement sur Windows sans menu Grub. Pourquoi cela ?
Je ne suis pas certain de la réponse donc je préfère m'abstenir.
Hors ligne
#19 Le 07/12/2020, à 10:15
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Donnez moi toujours votre reponse...
Je ne risque plus rien à ce stade.
Hors ligne
#20 Le 07/12/2020, à 12:03
- ikewdu
Re : (resolu)Impossible de démarrer sur Ubuntu
malbo a écrit :
Quand tu fais un démarrage normal sans faire un tour dans le Bios, le disque dur externe sde n'est pas encore opérationnel, ce qui fait que le chargeur d'amorçage de Grub déclare forfait et que tu obtiens l'écran noir avec une ligne "grub>"
Salut,
J'avoue que je n'avais pas envisagé cette piste... Si elle se confirme, il ne te restera plus qu'à avoir la partition efi et ton Linux sur le même disque et à placer tout ça en tête au démarrage. C'est déjà le cas pour la première partie, mais comme l'entrée correspondant au grub présent sur sde3 n'apparaît pas dans la listes des éléments bootables, il faudrait l'ajouter. Peut-être que la commande efibootmgr autorisera cet ajout. Sans certitude.
Qu'a donné le débranchement de sdb ?
Hors ligne
#21 Le 07/12/2020, à 14:37
- malbo
Re : (resolu)Impossible de démarrer sur Ubuntu
Après réexamen du Boot-info, je pense que la meilleure solution serait d'abandonner l'installation merdique actuelle (sur un disque dur externe) et de faire une installation sur le même disque (sda) que Windows. J'ai vu qu'il y a un taux d'occupation modéré des partitions sda4 (la partition système de Windows) et sda7 (la partition dont le label est "Documents"), ce qui pourrait permettre de réduire la taille de l'une ou l'autre de ces partitions afin de libérer 30 Go pour installer Ubuntu.
Dernière modification par malbo (Le 07/12/2020, à 14:40)
Hors ligne
#22 Le 08/12/2020, à 20:31
- Chanchris
Re : (resolu)Impossible de démarrer sur Ubuntu
Bonsoir. Merci malbo, j'ai finalement mis en place ta solution. J'ai installé Ubuntu sur le même disque Windows 10. Tout semble fonctionner, plus d'écran noir Grub mais le menu de boot normal.
J'ai enlevé 2 disques externes dont celui sur lequel était installé Ubuntu auparavant que j'ai formatés.
De plus, le chargement de Ubuntu est plus rapide.
Hors ligne
#23 Le 09/12/2020, à 07:31
- malbo
Re : (resolu)Impossible de démarrer sur Ubuntu
Bonjour,
Je suis content de cette issue heureuse.
Je te prie de fermer la discussion en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] Impossible de démarrer sur UbuntuEDIT : ce serait bien que tu fasses de même (passage en "résolu") pour l'autre discussion que tu as ouverte : https://forum.ubuntu-fr.org/viewtopic.php?id=2059505 obsolète
Dernière modification par malbo (Le 09/12/2020, à 09:35)
Hors ligne
#24 Le 09/12/2020, à 07:35
- malbo
Re : (resolu)Impossible de démarrer sur Ubuntu
La suite des aventures de Chanchris se trouve dans cette autre discussion : https://forum.ubuntu-fr.org/viewtopic.php?id=2059557 EDIT : obsolète. J'ai donc rayé le texte.
Dernière modification par malbo (Le 09/12/2020, à 09:29)
Hors ligne
#25 Le 09/12/2020, à 09:22
- cqfd93
Re : (resolu)Impossible de démarrer sur Ubuntu
Modération : merci de respecter les règles du forum : les doublons sont interdits. Sujets fusionnés.
− cqfd93 −
En ligne