problème d'impression avec brother HL-3150cdw (résolu)

Bernard479 · Le 16/12/2020, à 07:05

Bonjour à tous !
J'ai des soucis avec mon imprimante brother HL 3150CDW. Lorsque je lance une impression,
toutes les feuilles de mon bac sortent et rien n'est imprimé. Je suis sous xubuntu 20.04
Je ne sais pas ce que cela veut dire. Quelqu'un a une idée ?
Merci pour votre aide.

Dernière modification par Bernard479 (Le 01/02/2021, à 06:25)

xubu1957 · Le 16/12/2020, à 07:09

Bonjour,

Essaye :

Le 11/10/2020, ylag a écrit :

Bonjour,
(...)
Si ça ne fonctionne pas, peut-être tenter la suppression du paquet ippusbxd qui semble poser problème pour les imprimantes usb sur la 20.04?
sudo apt purge ippusbxd
...redémarrer et encore tenter de réinstaller l'imprimante?
Si ça ne fonctionne toujours pas, simplement réinstaller le paquet pour revenir à l'état initial:
sudo apt install ippusbxd
A+

dans > [RÉSOLU]Imprimante Canon et Ubuntu 20.04

Montre d'éventuels paquets cassés :

dpkg -l | grep -v ^ii

et :

dpkg -l | grep -i brother

Bernard479 · Le 16/12/2020, à 17:23

Bonjour xubu 1957
Je ne sais pas si cela a une importance, mais
j'ai oublié de dire que l'imprimante n'est pas branchée sur le port usb
mais sur le réseau de mon boitier orange.
Merci à toi

xubu1957 · Le 16/12/2020, à 17:39

Tu avais regardé la Doc hplip ?

C'est une imprimante Brother.

Dernière modification par xubu1957 (Le 17/12/2020, à 06:31)

Bernard479 · Le 17/12/2020, à 03:21

Bonjour xubu1957
Non je n'ai pas regardé la doc mais je vais le faire immédiatement
et je reviens vers toi. Merci

Bernard479 · Le 17/12/2020, à 03:25

Mais je ne comprends pas xubu !
Pourquoi tu m'envoies vers installer une imprimante Hewlett packard ?
merci d'éclairer ma lanterne.
a+

xubu1957 · Le 17/12/2020, à 06:30

Bonjour,

Mes excuses, j'ai dû confondre avec un autre fil !

#2, xubu a écrit :

Montre d'éventuels paquets cassés :
dpkg -l | grep -v ^ii
et :
dpkg -l | grep -i brother

Bernard479 · Le 18/12/2020, à 05:10

Bonjour xubu1957,
J'ai tapé ce que tu m'as dit et cela a donné :
pour la première instruction

$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                   Version                               Architecture Description
+++-=====================================-=====================================-============-======================================================================================================
rc  linux-image-5.4.0-32-generic          5.4.0-32.36                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-33-generic          5.4.0-33.37                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-34-generic          5.4.0-34.38                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-37-generic          5.4.0-37.41                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-39-generic          5.4.0-39.43                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-40-generic          5.4.0-40.44                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-42-generic          5.4.0-42.46                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-45-generic          5.4.0-45.49                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-47-generic          5.4.0-47.51                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-48-generic          5.4.0-48.52                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-51-generic          5.4.0-51.56                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-52-generic          5.4.0-52.57                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-53-generic          5.4.0-53.59                           amd64        Signed kernel image generic
rc  linux-modules-5.4.0-32-generic        5.4.0-32.36                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-33-generic        5.4.0-33.37                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-34-generic        5.4.0-34.38                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-37-generic        5.4.0-37.41                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-39-generic        5.4.0-39.43                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-40-generic        5.4.0-40.44                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-42-generic        5.4.0-42.46                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-45-generic        5.4.0-45.49                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-47-generic        5.4.0-47.51                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-48-generic        5.4.0-48.52                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-51-generic        5.4.0-51.56                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-52-generic        5.4.0-52.57                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-53-generic        5.4.0-53.59                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-32-generic  5.4.0-32.36                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-33-generic  5.4.0-33.37                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-34-generic  5.4.0-34.38                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-37-generic  5.4.0-37.41                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-39-generic  5.4.0-39.43                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-40-generic  5.4.0-40.44                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-42-generic  5.4.0-42.46                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-45-generic  5.4.0-45.49                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-47-generic  5.4.0-47.51                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-48-generic  5.4.0-48.52                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-51-generic  5.4.0-51.56                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-52-generic  5.4.0-52.57                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-53-generic  5.4.0-53.59                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP

pour la deuxième instruction

$ dpkg -l | grep -i brother
ii  printer-driver-brlaser                6-1build1                             amd64        printer driver for (some) Brother laser printers
ii  printer-driver-ptouch                 1.4.2-3                               amd64        printer driver Brother P-touch label printers

xubu1957 · Le 18/12/2020, à 06:03

Bonjour,

Pour nettoyer :

Le 11/02/2017, moko138 a écrit :

Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P

Il faudrait fournir les autres Informations utiles à donner lorsque j'ai un problème.

_ _ _

Regarde également la Doc :

> impression_sous_ubuntu

> tutoriel/installer_imprimante_partage

> § 7 - livebox#serveur_d_impression

Dernière modification par xubu1957 (Le 18/12/2020, à 06:15)

Bernard479 · Le 19/12/2020, à 02:56

Merci xubu1957
J'ai tapé dans le terminal la commande pour supprimer tous
les fichiers marqués "rc" et cela a donné:

$ dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
[sudo] Mot de passe de lallemand : 
(Lecture de la base de données... 235490 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de linux-image-5.4.0-32-generic (5.4.0-32.36) ...
Purge des fichiers de configuration de linux-image-5.4.0-33-generic (5.4.0-33.37) ...
Purge des fichiers de configuration de linux-image-5.4.0-34-generic (5.4.0-34.38) ...
Purge des fichiers de configuration de linux-image-5.4.0-37-generic (5.4.0-37.41) ...
Purge des fichiers de configuration de linux-image-5.4.0-39-generic (5.4.0-39.43) ...
Purge des fichiers de configuration de linux-image-5.4.0-40-generic (5.4.0-40.44) ...
Purge des fichiers de configuration de linux-image-5.4.0-42-generic (5.4.0-42.46) ...
Purge des fichiers de configuration de linux-image-5.4.0-45-generic (5.4.0-45.49) ...
Purge des fichiers de configuration de linux-image-5.4.0-47-generic (5.4.0-47.51) ...
Purge des fichiers de configuration de linux-image-5.4.0-48-generic (5.4.0-48.52) ...
Purge des fichiers de configuration de linux-image-5.4.0-51-generic (5.4.0-51.56) ...
Purge des fichiers de configuration de linux-image-5.4.0-52-generic (5.4.0-52.57) ...
Purge des fichiers de configuration de linux-image-5.4.0-53-generic (5.4.0-53.59) ...
Purge des fichiers de configuration de linux-modules-5.4.0-32-generic (5.4.0-32.36) ...
Purge des fichiers de configuration de linux-modules-5.4.0-33-generic (5.4.0-33.37) ...
Purge des fichiers de configuration de linux-modules-5.4.0-34-generic (5.4.0-34.38) ...
Purge des fichiers de configuration de linux-modules-5.4.0-37-generic (5.4.0-37.41) ...
Purge des fichiers de configuration de linux-modules-5.4.0-39-generic (5.4.0-39.43) ...
Purge des fichiers de configuration de linux-modules-5.4.0-40-generic (5.4.0-40.44) ...
Purge des fichiers de configuration de linux-modules-5.4.0-42-generic (5.4.0-42.46) ...
Purge des fichiers de configuration de linux-modules-5.4.0-45-generic (5.4.0-45.49) ...
Purge des fichiers de configuration de linux-modules-5.4.0-47-generic (5.4.0-47.51) ...
Purge des fichiers de configuration de linux-modules-5.4.0-48-generic (5.4.0-48.52) ...
Purge des fichiers de configuration de linux-modules-5.4.0-51-generic (5.4.0-51.56) ...
Purge des fichiers de configuration de linux-modules-5.4.0-52-generic (5.4.0-52.57) ...
Purge des fichiers de configuration de linux-modules-5.4.0-53-generic (5.4.0-53.59) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-32-generic (5.4.0-32.36) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-33-generic (5.4.0-33.37) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-34-generic (5.4.0-34.38) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-37-generic (5.4.0-37.41) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-39-generic (5.4.0-39.43) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-40-generic (5.4.0-40.44) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-42-generic (5.4.0-42.46) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-45-generic (5.4.0-45.49) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-47-generic (5.4.0-47.51) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-48-generic (5.4.0-48.52) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-51-generic (5.4.0-51.56) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-52-generic (5.4.0-52.57) ...
Purge des fichiers de configuration de linux-modules-extra-5.4.0-53-generic (5.4.0-53.59) ...

Je vais regarder également la documentation que tu me donnes.
Je reviens vers toi si nécessaire.
Grand merci pour ton aide.

Bernard479 · Le 30/12/2020, à 08:33

Bonjour xubu1957
désolé pour ce temps assez long de non présence sur le forum
mais je n'étais pas chez moi pour plus d'une semaine.
je te recontacte trés vite
merci encore et encore.

xubu1957 · Le 30/12/2020, à 08:35

Bonjour,

Je ne m'inquiète pas.

Dans le bénévolat, on ne touche pas de prime de rendement !

Bernard479 · Le 30/12/2020, à 10:15

C'est super xubu1957
Je suis allé regarder les documents mais je m'y perds un peu.
serait il possible de tout débrancher et de repartir à zéro?
J'ai le sentiment qu'il y a conflit matériel !
avant je pouvait imprimer recto verso, mais ce n'est plus possible maintenant.
a +

xubu1957 · Le 30/12/2020, à 10:29

Dans le tutoriel épinglé, sylvain 3800 a écrit :

B.2 )Les infos a donner quel que soit la marque de l'imprimante
il suffit de copier/coller ces commandes :
dpkg -l | grep cups
lpstat -t
/usr/sbin/lpinfo -v
cat /var/log/cups/error_log
et voilà avec tout ceci ton problème sera clairement identifié et la solution clef en main pourra t'être proposé rapidement. (sic)

Bernard479 · Le 03/01/2021, à 12:55

Bonjour xubu1957
un j'espère que tu as passé de bonnes fêtes de la saint sylvestre !
et je te souhaite une bonne année 2021.
J'ai copié la première commande et cela m'a donné ;

dpkg -l | grep cups
ii  bluez-cups                            5.53-0ubuntu3                         amd64        Bluetooth printer driver for CUPS
ii  cups                                  2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                          1.27.4-1                              amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                              2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                           2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                           2.3.1-9ubuntu1.1                      all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                     2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                           2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                          1.27.4-1                              amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers             1.27.4-1                              amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                        2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                        0.2.6-1ubuntu3                        amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                             2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                    2.3.1-9ubuntu1.1                      all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                        2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                 1.27.4-1                              amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                   2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - Raster image library
ii  printer-driver-hpcups                 3.20.3+dfsg0-2                        amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups                          1.9.73-3build1                        amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                   1.5.12-0ubuntu1                       all          Python utility modules around the CUPS printing system

la deuxième donne ceci :

lpstat -t
scheduler is running
system default destination: Brother-HL-3150CDW-series
matériel pour Brother-HL-3150CDW-series : dnssd://Brother%20HL-3150CDW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055c78f6c5
matériel pour G3010-series : usb://Canon/G3010%20series?serial=0C0DD3&interface=1
matériel pour G3010USB : cnijbe2://Canon/?port=usb&serial=0C0DD3
Brother-HL-3150CDW-series accepte des requêtes depuis mer. 30 déc. 2020 12:58:08
G3010-series accepte des requêtes depuis lun. 25 mai 2020 11:57:59
G3010USB accepte des requêtes depuis mer. 30 déc. 2020 12:28:54
printer Brother-HL-3150CDW-series is idle.  enabled since mer. 30 déc. 2020 12:58:08
printer G3010-series is idle.  enabled since lun. 25 mai 2020 11:57:59
printer G3010USB is idle.  enabled since mer. 30 déc. 2020 12:28:54

la troisième donne ;

/usr/sbin/lpinfo -v
network beh
file cups-brf:/
network https
network ipps
network ipp
network http
network socket
network lpd
direct hp
direct hpfax
network dnssd://Brother%20HL-3150CDW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055c78f6c5
network lpd://BRN30055C78F6C5/BINARY_P1
network ipp://Brother%20HL-3150CDW%20series._ipp._tcp.local/

et la dernière ;

D [03/Jan/2021:08:32:04 +0400] [Client 2] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:04 +0400] [Client 2] Waiting for request.
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] POST /printers/Brother-HL-3150CDW-series HTTP/1.1
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] Read: status=200, state=6
D [03/Jan/2021:08:32:04 +0400] [Client 1] No authentication data provided.
D [03/Jan/2021:08:32:04 +0400] [Client 1] 2.0 Get-Printer-Attributes 4
D [03/Jan/2021:08:32:04 +0400] Get-Printer-Attributes ipp://localhost/printers/Brother-HL-3150CDW-series
D [03/Jan/2021:08:32:04 +0400] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother-HL-3150CDW-series) from localhost.
D [03/Jan/2021:08:32:04 +0400] [Client 1] Content-Length: 138
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] con->http=0x559e4f2f96f0
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x559e4f2ebc90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:32:04 +0400] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] bytes=0, http_state=0, data_remaining=138
D [03/Jan/2021:08:32:04 +0400] [Client 1] Flushing write buffer.
D [03/Jan/2021:08:32:04 +0400] [Client 1] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:04 +0400] [Client 1] Waiting for request.
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] POST /printers/G3010-series HTTP/1.1
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] Read: status=200, state=6
D [03/Jan/2021:08:32:04 +0400] [Client 1] No authentication data provided.
D [03/Jan/2021:08:32:04 +0400] [Client 1] 2.0 Get-Printer-Attributes 5
D [03/Jan/2021:08:32:04 +0400] Get-Printer-Attributes ipp://localhost/printers/G3010-series
D [03/Jan/2021:08:32:04 +0400] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/G3010-series) from localhost.
D [03/Jan/2021:08:32:04 +0400] [Client 1] Content-Length: 138
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] con->http=0x559e4f2f96f0
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x559e4f2f06b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:32:04 +0400] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] bytes=0, http_state=0, data_remaining=138
D [03/Jan/2021:08:32:04 +0400] [Client 1] Flushing write buffer.
D [03/Jan/2021:08:32:04 +0400] [Client 1] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:04 +0400] [Client 1] Waiting for request.
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] POST /printers/G3010USB HTTP/1.1
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] Read: status=200, state=6
D [03/Jan/2021:08:32:04 +0400] [Client 1] No authentication data provided.
D [03/Jan/2021:08:32:04 +0400] [Client 1] 2.0 Get-Printer-Attributes 6
D [03/Jan/2021:08:32:04 +0400] Get-Printer-Attributes ipp://localhost/printers/G3010USB
D [03/Jan/2021:08:32:04 +0400] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/G3010USB) from localhost.
D [03/Jan/2021:08:32:04 +0400] [Client 1] Content-Length: 138
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] con->http=0x559e4f2f96f0
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x559e4f2ebc90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:32:04 +0400] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] bytes=0, http_state=0, data_remaining=138
D [03/Jan/2021:08:32:04 +0400] [Client 1] Flushing write buffer.
D [03/Jan/2021:08:32:04 +0400] [Client 1] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:04 +0400] [Client 1] Waiting for request.
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] POST / HTTP/1.1
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] Read: status=200, state=6
D [03/Jan/2021:08:32:04 +0400] [Client 1] No authentication data provided.
D [03/Jan/2021:08:32:04 +0400] [Client 1] 2.0 CUPS-Get-Default 7
D [03/Jan/2021:08:32:04 +0400] CUPS-Get-Default
D [03/Jan/2021:08:32:04 +0400] [Client 1] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [03/Jan/2021:08:32:04 +0400] [Client 1] Content-Length: 10119
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] con->http=0x559e4f2f96f0
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10119, response=0x559e4f2e65a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:32:04 +0400] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] bytes=0, http_state=0, data_remaining=10119
D [03/Jan/2021:08:32:04 +0400] [Client 1] Flushing write buffer.
D [03/Jan/2021:08:32:04 +0400] [Client 1] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:04 +0400] [Client 1] Waiting for request.
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] POST / HTTP/1.1
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] Read: status=200, state=6
D [03/Jan/2021:08:32:04 +0400] [Client 1] No authentication data provided.
D [03/Jan/2021:08:32:04 +0400] [Client 1] 2.0 Create-Printer-Subscriptions 8
D [03/Jan/2021:08:32:04 +0400] Create-Printer-Subscriptions /
D [03/Jan/2021:08:32:04 +0400] create_subscriptions(con=0x559e4f2f6750(1), uri="/")
D [03/Jan/2021:08:32:04 +0400] recipient="dbus://"
D [03/Jan/2021:08:32:04 +0400] notify-lease-duration=86400
D [03/Jan/2021:08:32:04 +0400] notify-time-interval=0
D [03/Jan/2021:08:32:04 +0400] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [03/Jan/2021:08:32:04 +0400] Added subscription #734 for server.
D [03/Jan/2021:08:32:04 +0400] cupsdMarkDirty(----S)
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Jan/2021:08:32:04 +0400] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [03/Jan/2021:08:32:04 +0400] [Client 1] Content-Length: 107
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] con->http=0x559e4f2f96f0
D [03/Jan/2021:08:32:04 +0400] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x559e4f28ef10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:32:04 +0400] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:32:04 +0400] [Client 1] bytes=0, http_state=0, data_remaining=107
D [03/Jan/2021:08:32:04 +0400] [Client 1] Flushing write buffer.
D [03/Jan/2021:08:32:04 +0400] [Client 1] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:04 +0400] [Client 1] Waiting for request.
D [03/Jan/2021:08:32:04 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [03/Jan/2021:08:32:05 +0400] Expiring subscriptions...
D [03/Jan/2021:08:32:09 +0400] [Client 1] POST / HTTP/1.1
D [03/Jan/2021:08:32:09 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2021:08:32:09 +0400] [Client 1] Read: status=200, state=6
D [03/Jan/2021:08:32:09 +0400] [Client 1] No authentication data provided.
D [03/Jan/2021:08:32:09 +0400] [Client 1] 2.0 Get-Notifications 9
D [03/Jan/2021:08:32:09 +0400] Get-Notifications /
D [03/Jan/2021:08:32:09 +0400] cupsdIsAuthorized: requesting-user-name="root"
D [03/Jan/2021:08:32:09 +0400] [Client 1] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [03/Jan/2021:08:32:09 +0400] [Client 1] Content-Length: 127
D [03/Jan/2021:08:32:09 +0400] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [03/Jan/2021:08:32:09 +0400] Expiring subscriptions...
D [03/Jan/2021:08:32:09 +0400] [Client 1] con->http=0x559e4f2f96f0
D [03/Jan/2021:08:32:09 +0400] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x559e4f28ef10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:32:09 +0400] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:32:09 +0400] [Client 1] bytes=0, http_state=0, data_remaining=127
D [03/Jan/2021:08:32:09 +0400] [Client 1] Flushing write buffer.
D [03/Jan/2021:08:32:09 +0400] [Client 1] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:32:09 +0400] [Client 1] Waiting for request.
D [03/Jan/2021:08:32:09 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [03/Jan/2021:08:32:10 +0400] Expiring subscriptions...
I [03/Jan/2021:08:32:35 +0400] Saving subscriptions.conf...
D [03/Jan/2021:08:32:35 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [03/Jan/2021:08:32:35 +0400] Expiring subscriptions...
D [03/Jan/2021:08:36:08 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:08:36:08 +0400] [Client 3] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:08:36:08 +0400] [Client 3] Accepted from localhost (Domain)
D [03/Jan/2021:08:36:08 +0400] [Client 3] Waiting for request.
I [03/Jan/2021:08:36:08 +0400] Expiring subscriptions...
D [03/Jan/2021:08:36:08 +0400] Report: clients=3
D [03/Jan/2021:08:36:08 +0400] Report: jobs=173
D [03/Jan/2021:08:36:08 +0400] Report: jobs-active=0
D [03/Jan/2021:08:36:08 +0400] Report: printers=3
D [03/Jan/2021:08:36:08 +0400] Report: stringpool-string-count=1237
D [03/Jan/2021:08:36:08 +0400] Report: stringpool-alloc-bytes=9896
D [03/Jan/2021:08:36:08 +0400] Report: stringpool-total-bytes=24552
D [03/Jan/2021:08:36:08 +0400] [Client 3] POST / HTTP/1.1
D [03/Jan/2021:08:36:08 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Jan/2021:08:36:08 +0400] [Client 3] Read: status=200, state=6
D [03/Jan/2021:08:36:08 +0400] [Client 3] No authentication data provided.
D [03/Jan/2021:08:36:08 +0400] [Client 3] 2.0 Get-Jobs 1
D [03/Jan/2021:08:36:08 +0400] Get-Jobs ipp://localhost/printers/
D [03/Jan/2021:08:36:08 +0400] [Client 3] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost.
D [03/Jan/2021:08:36:08 +0400] [Client 3] Content-Length: 75
D [03/Jan/2021:08:36:08 +0400] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:08:36:08 +0400] [Client 3] con->http=0x559e4f3036b0
D [03/Jan/2021:08:36:08 +0400] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x559e4f28f1f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:08:36:08 +0400] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:08:36:08 +0400] [Client 3] bytes=0, http_state=0, data_remaining=75
D [03/Jan/2021:08:36:08 +0400] [Client 3] Flushing write buffer.
D [03/Jan/2021:08:36:08 +0400] [Client 3] New state is HTTP_STATE_WAITING
D [03/Jan/2021:08:36:08 +0400] [Client 3] Waiting for request.
D [03/Jan/2021:08:36:08 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:08:36:08 +0400] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:08:36:08 +0400] [Client 3] Closing connection.
D [03/Jan/2021:08:36:08 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [03/Jan/2021:08:36:09 +0400] Expiring subscriptions...
I [03/Jan/2021:08:47:05 +0400] Expiring subscriptions...
D [03/Jan/2021:08:47:05 +0400] cupsdAddCert: Adding certificate for PID 0
D [03/Jan/2021:08:47:05 +0400] Closing client 2 after 900 seconds of inactivity.
D [03/Jan/2021:08:47:05 +0400] [Client 2] Closing connection.
D [03/Jan/2021:08:47:05 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [03/Jan/2021:08:47:05 +0400] Report: clients=1
D [03/Jan/2021:08:47:05 +0400] Report: jobs=173
D [03/Jan/2021:08:47:05 +0400] Report: jobs-active=0
D [03/Jan/2021:08:47:05 +0400] Report: printers=3
D [03/Jan/2021:08:47:05 +0400] Report: stringpool-string-count=1237
D [03/Jan/2021:08:47:05 +0400] Report: stringpool-alloc-bytes=9896
D [03/Jan/2021:08:47:05 +0400] Report: stringpool-total-bytes=24552
I [03/Jan/2021:08:47:10 +0400] Expiring subscriptions...
D [03/Jan/2021:08:47:10 +0400] Closing client 1 after 900 seconds of inactivity.
D [03/Jan/2021:08:47:10 +0400] [Client 1] Closing connection.
D [03/Jan/2021:08:47:10 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [03/Jan/2021:13:13:19 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:13:13:19 +0400] [Client 4] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:13:13:19 +0400] [Client 4] Accepted from localhost (Domain)
D [03/Jan/2021:13:13:19 +0400] [Client 4] Waiting for request.
I [03/Jan/2021:13:13:19 +0400] Expiring subscriptions...
D [03/Jan/2021:13:13:19 +0400] cupsdAddCert: Adding certificate for PID 0
D [03/Jan/2021:13:13:19 +0400] Report: clients=1
D [03/Jan/2021:13:13:19 +0400] Report: jobs=173
D [03/Jan/2021:13:13:19 +0400] Report: jobs-active=0
D [03/Jan/2021:13:13:19 +0400] Report: printers=3
D [03/Jan/2021:13:13:19 +0400] Report: stringpool-string-count=1237
D [03/Jan/2021:13:13:19 +0400] Report: stringpool-alloc-bytes=9896
D [03/Jan/2021:13:13:19 +0400] Report: stringpool-total-bytes=24552
D [03/Jan/2021:13:13:19 +0400] [Client 4] POST / HTTP/1.1
D [03/Jan/2021:13:13:19 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=200, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] No authentication data provided.
D [03/Jan/2021:13:13:19 +0400] [Client 4] 2.0 CUPS-Get-Default 1
D [03/Jan/2021:13:13:19 +0400] CUPS-Get-Default
D [03/Jan/2021:13:13:19 +0400] [Client 4] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [03/Jan/2021:13:13:19 +0400] [Client 4] Content-Length: 10119
D [03/Jan/2021:13:13:19 +0400] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:13:13:19 +0400] [Client 4] con->http=0x559e4f2f96f0
D [03/Jan/2021:13:13:19 +0400] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10119, response=0x559e4f2f1d00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:13:13:19 +0400] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:13:13:19 +0400] [Client 4] bytes=0, http_state=0, data_remaining=10119
D [03/Jan/2021:13:13:19 +0400] [Client 4] Flushing write buffer.
D [03/Jan/2021:13:13:19 +0400] [Client 4] New state is HTTP_STATE_WAITING
D [03/Jan/2021:13:13:19 +0400] [Client 4] Waiting for request.
D [03/Jan/2021:13:13:19 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:13:13:19 +0400] [Client 4] POST / HTTP/1.1
D [03/Jan/2021:13:13:19 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=200, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] No authentication data provided.
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] Read: status=100, state=6
D [03/Jan/2021:13:13:19 +0400] [Client 4] 2.0 CUPS-Get-Printers 2
D [03/Jan/2021:13:13:19 +0400] CUPS-Get-Printers
D [03/Jan/2021:13:13:19 +0400] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [03/Jan/2021:13:13:19 +0400] [Client 4] Content-Length: 3876
D [03/Jan/2021:13:13:19 +0400] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:13:13:19 +0400] [Client 4] con->http=0x559e4f2f96f0
D [03/Jan/2021:13:13:19 +0400] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3876, response=0x559e4f26d510(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:13:13:19 +0400] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:13:13:19 +0400] [Client 4] bytes=0, http_state=0, data_remaining=3876
D [03/Jan/2021:13:13:19 +0400] [Client 4] Flushing write buffer.
D [03/Jan/2021:13:13:19 +0400] [Client 4] New state is HTTP_STATE_WAITING
D [03/Jan/2021:13:13:19 +0400] [Client 4] Waiting for request.
D [03/Jan/2021:13:13:19 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:13:13:19 +0400] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:13:13:19 +0400] [Client 4] Closing connection.
D [03/Jan/2021:13:13:19 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [03/Jan/2021:13:13:20 +0400] Expiring subscriptions...
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:15:48:14 +0400] [Client 5] Accepted from localhost (Domain)
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
I [03/Jan/2021:15:48:14 +0400] Expiring subscriptions...
D [03/Jan/2021:15:48:14 +0400] cupsdAddCert: Adding certificate for PID 0
D [03/Jan/2021:15:48:14 +0400] Report: clients=1
D [03/Jan/2021:15:48:14 +0400] Report: jobs=173
D [03/Jan/2021:15:48:14 +0400] Report: jobs-active=0
D [03/Jan/2021:15:48:14 +0400] Report: printers=3
D [03/Jan/2021:15:48:14 +0400] Report: stringpool-string-count=1237
D [03/Jan/2021:15:48:14 +0400] Report: stringpool-alloc-bytes=9896
D [03/Jan/2021:15:48:14 +0400] Report: stringpool-total-bytes=24552
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 CUPS-Get-Default 1
D [03/Jan/2021:15:48:14 +0400] CUPS-Get-Default
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 10119
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10119, response=0x559e4f2c9110(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=10119
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 CUPS-Get-Printers 2
D [03/Jan/2021:15:48:14 +0400] CUPS-Get-Printers
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 3876
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3876, response=0x559e4f2f56d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=3876
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 6] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:15:48:14 +0400] [Client 6] Accepted from localhost (Domain)
D [03/Jan/2021:15:48:14 +0400] [Client 6] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:15:48:14 +0400] [Client 6] Closing connection.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=100, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 CUPS-Get-Classes 3
D [03/Jan/2021:15:48:14 +0400] CUPS-Get-Classes
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 75
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x559e4f2ebab0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=75
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 CUPS-Get-Printers 4
D [03/Jan/2021:15:48:14 +0400] CUPS-Get-Printers
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 604
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=604, response=0x559e4f2ea780(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=604
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 CUPS-Get-Printers 5
D [03/Jan/2021:15:48:14 +0400] CUPS-Get-Printers
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 447
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=447, response=0x559e4f2f1d00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=447
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 CUPS-Get-Printers 6
D [03/Jan/2021:15:48:14 +0400] CUPS-Get-Printers
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 1149
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1149, response=0x559e4f26d510(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=1149
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] POST / HTTP/1.1
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:48:14 +0400] [Client 5] Read: status=200, state=6
D [03/Jan/2021:15:48:14 +0400] [Client 5] No authentication data provided.
D [03/Jan/2021:15:48:14 +0400] [Client 5] 2.0 Get-Jobs 7
D [03/Jan/2021:15:48:14 +0400] Get-Jobs ipp://localhost/
D [03/Jan/2021:15:48:14 +0400] [Client 5] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [03/Jan/2021:15:48:14 +0400] [Client 5] Content-Length: 75
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:48:14 +0400] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x559e4f2f1090(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2021:15:48:14 +0400] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2021:15:48:14 +0400] [Client 5] bytes=0, http_state=0, data_remaining=75
D [03/Jan/2021:15:48:14 +0400] [Client 5] Flushing write buffer.
D [03/Jan/2021:15:48:14 +0400] [Client 5] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:48:14 +0400] [Client 5] Waiting for request.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:48:14 +0400] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:15:48:14 +0400] [Client 5] Closing connection.
D [03/Jan/2021:15:48:14 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [03/Jan/2021:15:48:15 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:50:25 +0400] [Client 7] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:15:50:25 +0400] [Client 7] Accepted from localhost (Domain)
D [03/Jan/2021:15:50:25 +0400] [Client 7] Waiting for request.
I [03/Jan/2021:15:50:25 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:25 +0400] Report: clients=1
D [03/Jan/2021:15:50:25 +0400] Report: jobs=173
D [03/Jan/2021:15:50:25 +0400] Report: jobs-active=0
D [03/Jan/2021:15:50:25 +0400] Report: printers=3
D [03/Jan/2021:15:50:25 +0400] Report: stringpool-string-count=1237
D [03/Jan/2021:15:50:25 +0400] Report: stringpool-alloc-bytes=9896
D [03/Jan/2021:15:50:25 +0400] Report: stringpool-total-bytes=24552
D [03/Jan/2021:15:50:25 +0400] [Client 7] POST / HTTP/1.1
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Jan/2021:15:50:25 +0400] [Client 7] Read: status=200, state=6
D [03/Jan/2021:15:50:25 +0400] [Client 7] No authentication data provided.
D [03/Jan/2021:15:50:25 +0400] [Client 7] 2.0 CUPS-Get-Devices 1
D [03/Jan/2021:15:50:25 +0400] CUPS-Get-Devices
D [03/Jan/2021:15:50:25 +0400] cupsdIsAuthorized: username=""
D [03/Jan/2021:15:50:25 +0400] [Client 7] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [03/Jan/2021:15:50:25 +0400] [Client 7] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [03/Jan/2021:15:50:25 +0400] [Client 7] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [03/Jan/2021:15:50:25 +0400] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:15:50:25 +0400] [Client 7] Closing connection.
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:50:25 +0400] [Client 8] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:15:50:25 +0400] [Client 8] Accepted from localhost (Domain)
D [03/Jan/2021:15:50:25 +0400] [Client 8] Waiting for request.
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Jan/2021:15:50:25 +0400] [Client 9] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:15:50:25 +0400] [Client 9] Accepted from localhost (Domain)
D [03/Jan/2021:15:50:25 +0400] [Client 9] Waiting for request.
D [03/Jan/2021:15:50:25 +0400] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:15:50:25 +0400] [Client 8] Closing connection.
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:50:25 +0400] [Client 10] Server address is "/run/cups/cups.sock".
D [03/Jan/2021:15:50:25 +0400] [Client 10] Accepted from localhost (Domain)
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for request.
D [03/Jan/2021:15:50:25 +0400] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:15:50:25 +0400] [Client 9] Closing connection.
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:50:25 +0400] [Client 10] POST / HTTP/1.1
D [03/Jan/2021:15:50:25 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Jan/2021:15:50:25 +0400] [Client 10] Read: status=200, state=6
D [03/Jan/2021:15:50:25 +0400] [Client 10] Authorized as lallemand using PeerCred.
D [03/Jan/2021:15:50:25 +0400] [Client 10] 2.0 CUPS-Get-Devices 1
D [03/Jan/2021:15:50:25 +0400] CUPS-Get-Devices
D [03/Jan/2021:15:50:25 +0400] cupsdIsAuthorized: username="lallemand"
D [03/Jan/2021:15:50:25 +0400] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [03/Jan/2021:15:50:25 +0400] [CGI] argv[1] = "1"
D [03/Jan/2021:15:50:25 +0400] [CGI] argv[2] = "0"
D [03/Jan/2021:15:50:25 +0400] [CGI] argv[3] = "15"
D [03/Jan/2021:15:50:25 +0400] [CGI] argv[4] = "7"
D [03/Jan/2021:15:50:25 +0400] [CGI] argv[5] = "requested-attributes=all"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[10] = "SERVER_ADMIN=root@lallemand-All-Series"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[11] = "SOFTWARE=CUPS/2.3.1"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[13] = "USER=root"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[17] = "IPP_PORT=631"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[18] = "AUTH_TYPE=PeerCred"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[19] = "LANG=fr_FR.UTF8"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[22] = "SERVER_NAME=localhost"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[23] = "SERVER_PORT=631"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[24] = "REMOTE_ADDR=localhost"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[26] = "SCRIPT_NAME=/"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[28] = "REMOTE_USER=lallemand"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[30] = "HTTP_USER_AGENT=CUPS/2.3.1 (Linux 5.4.0-58-generic; x86_64) IPP/2.0"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[31] = "REQUEST_METHOD=POST"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[32] = "CONTENT_LENGTH=75"
D [03/Jan/2021:15:50:25 +0400] [CGI] envp[33] = "CONTENT_TYPE=application/ipp"
D [03/Jan/2021:15:50:25 +0400] cupsdAddCert: Adding certificate for PID 13882
D [03/Jan/2021:15:50:25 +0400] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 13882)
I [03/Jan/2021:15:50:25 +0400] [Client 10] Started "/usr/lib/cups/daemon/cups-deviced" (pid=13882, file=13)
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 13886)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 13887)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 13888)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 13889)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 13890)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 13891)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 13892)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 13893)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 13894)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 13895)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 13896)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 13897)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 13898)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 13899)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 13900)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 13901)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/cnijbe2 (PID 13902)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 13903)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 13904)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 13905)
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"beh\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13888 (beh) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] Script header: Content-Type: application/ipp
D [03/Jan/2021:15:50:25 +0400] [Client 10] Script header: 
D [03/Jan/2021:15:50:25 +0400] [Client 10] Sending status 200 for CGI.
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"cups-brf:/\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"https\"...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13895 (cups-brf) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13897 (mdns) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13899 (https) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"ipps\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13903 (ipps) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13894 (bluetooth) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"ipp\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13892 (parallel) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [CGI] Started ippfind (PID 13906)
D [03/Jan/2021:15:50:25 +0400] [CGI] Started post-processing (PID 13907)
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13905 (ipp) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13891 (implicitclass) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"http\"...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13887 (http) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"socket\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13900 (socket) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"lpd\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13886 (lpd) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13898 (serial) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [03/Jan/2021:15:50:25 +0400] [CGI] Loaded 95 quirks.
D [03/Jan/2021:15:50:25 +0400] [CGI] list_devices
D [03/Jan/2021:15:50:25 +0400] [CGI] libusb_get_device_list=9
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13889 (usb) exited with no errors.
D [03/Jan/2021:15:50:25 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:25 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] Found device \"hp\"...
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:25 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:25 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:25 +0400] [cups-deviced] PID 13893 (hp) exited with no errors.
D [03/Jan/2021:15:50:26 +0400] [CGI] Querying \"Brother\\032HL-3150CDW\\032series._ipp._tcp.local\"...
I [03/Jan/2021:15:50:26 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:26 +0400] [CGI] Querying \"Brother\\032HL-3150CDW\\032series._pdl-datastream._tcp.local\"...
D [03/Jan/2021:15:50:26 +0400] [CGI] Querying \"Brother\\032HL-3150CDW\\032series._printer._tcp.local\"...
D [03/Jan/2021:15:50:26 +0400] [CGI] sent=0, count=3
D [03/Jan/2021:15:50:26 +0400] [CGI] \033[31;01merror: Failed to create /var/spool/cups/tmp/.hplip\033[0m
D [03/Jan/2021:15:50:26 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:26 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:26 +0400] [cups-deviced] Found device \"hpfax\"...
D [03/Jan/2021:15:50:26 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:26 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:26 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:26 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:26 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:26 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:26 +0400] [cups-deviced] PID 13901 (hpfax) exited with no errors.
D [03/Jan/2021:15:50:27 +0400] [CGI] sent=3, count=3
D [03/Jan/2021:15:50:27 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:27 +0400] [cups-deviced] Found device \"dnssd://Brother%20HL-3150CDW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055c78f6c5\"...
D [03/Jan/2021:15:50:27 +0400] [Client 10] CGI data ready to be sent.
I [03/Jan/2021:15:50:27 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:27 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:27 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:27 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:27 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:27 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:27 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:27 +0400] [cups-deviced] PID 13896 (dnssd) exited with no errors.
D [03/Jan/2021:15:50:27 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:27 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:27 +0400] [cups-deviced] Found device \"lpd://BRN30055C78F6C5/BINARY_P1\"...
D [03/Jan/2021:15:50:27 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:27 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:27 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:27 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:27 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:27 +0400] [Client 10] Waiting for CGI data.
I [03/Jan/2021:15:50:28 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:29 +0400] [CGI] PID 13906 (ippfind) exited with no errors.
D [03/Jan/2021:15:50:29 +0400] [CGI] Flushed attributes...
D [03/Jan/2021:15:50:29 +0400] [cups-deviced] Found device \"ipp://Brother%20HL-3150CDW%20series._ipp._tcp.local/\"...
D [03/Jan/2021:15:50:29 +0400] [Client 10] CGI data ready to be sent.
I [03/Jan/2021:15:50:29 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:29 +0400] [CGI] PID 13907 (Post-processing) exited with no errors.
D [03/Jan/2021:15:50:29 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:29 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:29 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:29 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:29 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:29 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:29 +0400] [cups-deviced] PID 13904 (driverless) exited with no errors.
D [03/Jan/2021:15:50:29 +0400] [cups-deviced] PID 13890 (snmp) exited with no errors.
I [03/Jan/2021:15:50:30 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:31 +0400] [cups-deviced] PID 13902 (cnijbe2) exited with no errors.
D [03/Jan/2021:15:50:31 +0400] [Client 10] CGI data ready to be sent.
I [03/Jan/2021:15:50:31 +0400] Expiring subscriptions...
D [03/Jan/2021:15:50:31 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:31 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:31 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:31 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:31 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:31 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:31 +0400] [Client 10] CGI data ready to be sent.
D [03/Jan/2021:15:50:31 +0400] PID 13882 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [03/Jan/2021:15:50:31 +0400] [Client 10] con->http=0x559e4f2f96f0
D [03/Jan/2021:15:50:31 +0400] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=13882, file=13
D [03/Jan/2021:15:50:31 +0400] [Client 10] Waiting for CGI data.
D [03/Jan/2021:15:50:31 +0400] [Client 10] Sending 0-length chunk.
D [03/Jan/2021:15:50:31 +0400] [Client 10] Flushing write buffer.
D [03/Jan/2021:15:50:31 +0400] [Client 10] New state is HTTP_STATE_WAITING
D [03/Jan/2021:15:50:31 +0400] [Client 10] Waiting for request.
D [03/Jan/2021:15:50:31 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Jan/2021:15:50:31 +0400] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2021:15:50:31 +0400] [Client 10] Closing connection.
D [03/Jan/2021:15:50:31 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [03/Jan/2021:15:50:32 +0400] Expiring subscriptions...

Merci

Bernard479 · Le 06/01/2021, à 08:42

bonjour xubu1957
des nouvelles ?
merci

xubu1957 · Le 06/01/2021, à 08:52

Bonjour,

Essaye :

sudo service cups restart

Bernard479 · Le 06/01/2021, à 16:31

xubu1957
c'est super, j'arrive à imprimer à nouveau normalement,
mais cependant je n'arrive plus à ouvrir aucun numériseur de document.
ni celui fourni avec xubuntu, ni Xsane.
désolé d'avoir encore besoin de toi.
Grand merci.

xubu1957 · Le 06/01/2021, à 16:41

Il faudrait fournir les infos, pour le scanner > Tuto : les Informations utiles à donner lorsque j'ai un problème.

sylvain3800 a écrit :

C ] les infos a donner si ton problème est un problème de scanner .
Bon des fois c'est le scanner qui veux pas scanner a lors dans ce cas là , c'est ces commandes qui sont intéressante pour les aidants
quel que soit la marque du scanner
dpkg -l | grep sane
sudo sane-find-scanner -q
scanimage -L
ls /etc/sane.d/
cat /etc/sane.d/dll.conf
ls  /lib/udev/rules.d | grep libsane

Bernard479 · Le 07/01/2021, à 04:47

xubu
merci pour ton aide.
Je vais aller voir les infos utiles à donner si problème
J'ai entré toutes les commandes de "sylvain"
voilà ce que cela donne ;

$ dpkg -l | grep sane
ii  libimage-sane-perl                    5-1                                   amd64        Perl extension for the SANE (Scanner Access Now Easy) Project
ii  libsane:amd64                         1.0.29-0ubuntu5.1                     amd64        API library for scanners
ii  libsane-common                        1.0.29-0ubuntu5.1                     all          API library for scanners -- documentation and support files
ii  libsane-hpaio:amd64                   3.20.3+dfsg0-2                        amd64        HP SANE backend for multi-function peripherals
ii  python3-sane:amd64                    2.8.3-4build1                         amd64        Python Imaging Library - SANE interface (Python3)
ii  sane                                  1.0.14-15                             amd64        scanner graphical frontends
ii  sane-utils                            1.0.29-0ubuntu5.1                     amd64        API library for scanners -- utilities
ii  xsane                                 0.999-8ubuntu2                        amd64        featureful graphical frontend for SANE (Scanner Access Now Easy)
ii  xsane-common                          0.999-8ubuntu2                        all          xsane architecture independent files
lallemand@lallemand-All-Series:~$ sudo sane-find-scanner -q
[sudo] Mot de passe de lallemand : 
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
lallemand@lallemand-All-Series:~$ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
lallemand@lallemand-All-Series:~$ ls /etc/sane.d/
abaton.conf          dmc.conf       lexmark.conf     saned.conf
agfafocus.conf       epjitsu.conf   ma1509.conf      sceptre.conf
apple.conf           epson2.conf    magicolor.conf   sharp.conf
artec.conf           epson.conf     matsushita.conf  sm3840.conf
artec_eplus48u.conf  epsonds.conf   microtek2.conf   snapscan.conf
avision.conf         escl.conf      microtek.conf    sp15c.conf
bh.conf              fujitsu.conf   mustek.conf      st400.conf
canon630u.conf       genesys.conf   mustek_pp.conf   stv680.conf
canon.conf           gphoto2.conf   mustek_usb.conf  tamarack.conf
canon_dr.conf        gt68xx.conf    nec.conf         teco1.conf
canon_pp.conf        hp3900.conf    net.conf         teco2.conf
cardscan.conf        hp4200.conf    p5.conf          teco3.conf
coolscan2.conf       hp5400.conf    pie.conf         test.conf
coolscan3.conf       hp.conf        pieusb.conf      u12.conf
coolscan.conf        hpsj5s.conf    pixma.conf       umax1220u.conf
dc210.conf           hs2p.conf      plustek.conf     umax.conf
dc240.conf           ibm.conf       plustek_pp.conf  umax_pp.conf
dc25.conf            kodakaio.conf  qcam.conf        xerox_mfp.conf
dell1600n_net.conf   kodak.conf     ricoh.conf
dll.conf             kvs1025.conf   rts8891.conf
dll.d                leo.conf       s9036.conf
lallemand@lallemand-All-Series:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
artec
artec_eplus48u
as6e
avision
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc210
#dc240
#dc25
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
escl
fujitsu
genesys
#gphoto2
gt68xx
hp
hp3500
hp3900
hp4200
hp5400
hp5590
hpljm1005
hpsj5s
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
kvs40xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pieusb
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
ricoh2
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
umax1220u
#umax_pp
v4l
xerox_mfp
lallemand@lallemand-All-Series:~$ ls /lib/udev/rules.d | grep libsane
60-libsane.rules

a +

Bernard479 · Le 07/01/2021, à 04:49

xubu
Je serais absent jusqu'a samedi matin.
merci pour ta patience.

xubu1957 · Le 07/01/2021, à 06:39

Bonjour,

Donne aussi :

ls /usr/lib64/sane/

repris dans > [RESOLU] - Scanner sur Brother MFC-660CN non reconnu

Si eric63 voit ton fil.

eric63 · Le 07/01/2021, à 09:29

salut et bonne année à tous

cat /etc/sane.d/dll.conf

avec cette commande je ne vois pas dans ta liste une ligne

brother4

donc je suppose qu’il manque quelque chose ou qu’un paquet n’est pas installé correctement
comme toujours je conseille dans ces cas là de passer par le script de demonipuch (regarde dans mon profil et suis les instructions à là lettre) qui devrait installer ce qui manque (à mon avis c’est une libusb ou le paquet brscan4)

Dernière modification par eric63 (Le 07/01/2021, à 09:36)

Bernard479 · Le 10/01/2021, à 07:40

Bonjour xubu1957, bonjour eric63
eric63 me fait penser que j'ai oublé de vous souhaiter à tous une très bonne année.

xubu1957, j'ai entré dans un terminal ta commande et cela a donné ceci .

ls /usr/lib64/sane/
ls: impossible d'accéder à '/usr/lib64/sane/': Aucun fichier ou dossier de ce type

eric63, je regarde immédiatement ton profil.

Grand merci à tous les deux

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 16/12/2020, à 07:05

problème d'impression avec brother HL-3150cdw (résolu)

#2 Le 16/12/2020, à 07:09

Re : problème d'impression avec brother HL-3150cdw (résolu)

#3 Le 16/12/2020, à 17:23

Re : problème d'impression avec brother HL-3150cdw (résolu)

#4 Le 16/12/2020, à 17:39

Re : problème d'impression avec brother HL-3150cdw (résolu)

#5 Le 17/12/2020, à 03:21

Re : problème d'impression avec brother HL-3150cdw (résolu)

#6 Le 17/12/2020, à 03:25

Re : problème d'impression avec brother HL-3150cdw (résolu)

#7 Le 17/12/2020, à 06:30

Re : problème d'impression avec brother HL-3150cdw (résolu)

#8 Le 18/12/2020, à 05:10

Re : problème d'impression avec brother HL-3150cdw (résolu)

#9 Le 18/12/2020, à 06:03

Re : problème d'impression avec brother HL-3150cdw (résolu)

#10 Le 19/12/2020, à 02:56

Re : problème d'impression avec brother HL-3150cdw (résolu)

#11 Le 30/12/2020, à 08:33

Re : problème d'impression avec brother HL-3150cdw (résolu)

#12 Le 30/12/2020, à 08:35

Re : problème d'impression avec brother HL-3150cdw (résolu)

#13 Le 30/12/2020, à 10:15

Re : problème d'impression avec brother HL-3150cdw (résolu)

#14 Le 30/12/2020, à 10:29

Re : problème d'impression avec brother HL-3150cdw (résolu)

#15 Le 03/01/2021, à 12:55

Re : problème d'impression avec brother HL-3150cdw (résolu)

#16 Le 06/01/2021, à 08:42

Re : problème d'impression avec brother HL-3150cdw (résolu)

#17 Le 06/01/2021, à 08:52

Re : problème d'impression avec brother HL-3150cdw (résolu)

#18 Le 06/01/2021, à 16:31

Re : problème d'impression avec brother HL-3150cdw (résolu)

#19 Le 06/01/2021, à 16:41

Re : problème d'impression avec brother HL-3150cdw (résolu)

#20 Le 07/01/2021, à 04:47

Re : problème d'impression avec brother HL-3150cdw (résolu)

#21 Le 07/01/2021, à 04:49

Re : problème d'impression avec brother HL-3150cdw (résolu)

#22 Le 07/01/2021, à 06:39

Re : problème d'impression avec brother HL-3150cdw (résolu)

#23 Le 07/01/2021, à 09:29

Re : problème d'impression avec brother HL-3150cdw (résolu)

#24 Le 10/01/2021, à 07:40

Re : problème d'impression avec brother HL-3150cdw (résolu)

Pied de page des forums