#26 Le 23/10/2020, à 15:24
- Saturnin51
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
0 mis à jour, 0 nouvellement installés, 1 à enlever et 15 non mis à jour.
Hors ligne
#27 Le 23/10/2020, à 15:27
- xubu1957
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
15 non mis à jourPasse :
sudo apt full-upgradeConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#28 Le 23/10/2020, à 17:25
- Saturnin51
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
sudo apt full-upgrade
[sudo] Mot de passe de robert :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
robert@robert-M11AD:~$J'avais déjà passé l'upgrade.
Hors ligne
#29 Le 23/10/2020, à 21:12
- Nuliel
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
Je vois pas comment ces deux paramètres ont pu arriver ici.
On va les enlever temporairement, histoire de voir si ça marche sans.
Je te laisse éteindre le pc, démarrer, appuyer sur shift pour afficher le menu grub (inutile si affiché par défaut), puis tu fais E pour éditer le démarrage, et tu supprimes nomsi ainsi que noaer puis tu fais F10 pour démarrer.
Puis tu peux donner
dmesgsi des erreurs AER apparaissent en grosse quantité, tu peux redémarrer, c'est que noaer est utile. Sinon tu peux aussi tester le bluetooth (avant de redémarrer, car le redémarrage fera perdre la modification du dessus, en gros les deux paramètres vont revenir)
Dernière modification par Nuliel (Le 23/10/2020, à 21:14)
Hors ligne
#30 Le 23/10/2020, à 21:47
- Saturnin51
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.4.0-52-generic (buildd@lgw01-amd64-060) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #57-Ubuntu SMP Thu Oct 15 10:57:00 UTC 2020 (Ubuntu 5.4.0-52.57-generic 5.4.65)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=0b8cac27-a007-4e7c-8291-f75bb37bc4f1 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca1d6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca1d7000-0x00000000ca1ddfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca1de000-0x00000000ca62afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca62b000-0x00000000caa51fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caa52000-0x00000000dd7d8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd7d9000-0x00000000dd9e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd9e1000-0x00000000dd9f6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd9f7000-0x00000000ddf32fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddf33000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. M11AD/M11AD, BIOS 0501 12/25/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.559 MHz processor
[ 0.001582] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001584] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001589] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.001593] MTRR default type: uncachable
[ 0.001593] MTRR fixed ranges enabled:
[ 0.001594] 00000-9FFFF write-back
[ 0.001595] A0000-BFFFF uncachable
[ 0.001595] C0000-CFFFF write-protect
[ 0.001596] D0000-E7FFF uncachable
[ 0.001597] E8000-FFFFF write-protect
[ 0.001597] MTRR variable ranges enabled:
[ 0.001598] 0 base 0000000000 mask 7E00000000 write-back
[ 0.001599] 1 base 0200000000 mask 7FF0000000 write-back
[ 0.001600] 2 base 0210000000 mask 7FF8000000 write-back
[ 0.001600] 3 base 0218000000 mask 7FFC000000 write-back
[ 0.001601] 4 base 021C000000 mask 7FFE000000 write-back
[ 0.001602] 5 base 021E000000 mask 7FFF000000 write-back
[ 0.001602] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.001603] 7 disabled
[ 0.001603] 8 disabled
[ 0.001603] 9 disabled
[ 0.001893] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002012] total RAM covered: 8176M
[ 0.002335] Found optimal setting for mtrr clean up
[ 0.002336] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.002593] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.002596] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.009431] found SMP MP-table at [mem 0x000fd790-0x000fd79f]
[ 0.015835] check: Scanning 1 areas for low memory corruption
[ 0.015838] Using GB pages for direct mapping
[ 0.016337] RAMDISK: [mem 0x2cfbd000-0x327d5fff]
[ 0.016343] ACPI: Early table checksum verification disabled
[ 0.016346] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.016349] ACPI: XSDT 0x00000000DD9E5080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.016353] ACPI: FACP 0x00000000DD9F2280 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.016358] ACPI: DSDT 0x00000000DD9E5188 00D0F4 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.016360] ACPI: FACS 0x00000000DDF31080 000040
[ 0.016362] ACPI: APIC 0x00000000DD9F2390 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.016364] ACPI: FPDT 0x00000000DD9F2408 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.016366] ACPI: SSDT 0x00000000DD9F2450 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.016368] ACPI: SSDT 0x00000000DD9F2990 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.016371] ACPI: MCFG 0x00000000DD9F3468 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.016373] ACPI: HPET 0x00000000DD9F34A8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.016375] ACPI: SSDT 0x00000000DD9F34E0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.016377] ACPI: SSDT 0x00000000DD9F3850 003482 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.016379] ACPI: MSDM 0x00000000DD9F6CD8 000055 (v01 ALASKA A M I 01072009 00000000)
[ 0.016381] ACPI: BGRT 0x00000000DD9F6D30 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.016389] ACPI: Local APIC address 0xfee00000
[ 0.016461] No NUMA configuration found
[ 0.016461] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.016470] NODE_DATA(0) allocated [mem 0x21efd3000-0x21effdfff]
[ 0.016667] Zone ranges:
[ 0.016668] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.016669] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.016670] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.016670] Device empty
[ 0.016671] Movable zone start for each node
[ 0.016674] Early memory node ranges
[ 0.016674] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.016675] node 0: [mem 0x0000000000100000-0x00000000ca1d6fff]
[ 0.016676] node 0: [mem 0x00000000ca1de000-0x00000000ca62afff]
[ 0.016677] node 0: [mem 0x00000000caa52000-0x00000000dd7d8fff]
[ 0.016677] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.016678] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.016805] Zeroed struct page in unavailable ranges: 15544 pages
[ 0.016806] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.016807] On node 0 totalpages: 2081608
[ 0.016808] DMA zone: 64 pages used for memmap
[ 0.016808] DMA zone: 21 pages reserved
[ 0.016809] DMA zone: 3996 pages, LIFO batch:0
[ 0.016851] DMA32 zone: 14095 pages used for memmap
[ 0.016852] DMA32 zone: 902060 pages, LIFO batch:63
[ 0.026341] Normal zone: 18368 pages used for memmap
[ 0.026342] Normal zone: 1175552 pages, LIFO batch:63
[ 0.038090] ACPI: PM-Timer IO Port: 0x1808
[ 0.038093] ACPI: Local APIC address 0xfee00000
[ 0.038099] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.038108] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.038109] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.038111] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.038112] ACPI: IRQ0 used by override.
[ 0.038112] ACPI: IRQ9 used by override.
[ 0.038114] Using ACPI (MADT) for SMP configuration information
[ 0.038115] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.038119] TSC deadline timer available
[ 0.038120] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.038135] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.038137] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.038137] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.038138] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.038138] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.038139] PM: Registered nosave memory: [mem 0xca1d7000-0xca1ddfff]
[ 0.038141] PM: Registered nosave memory: [mem 0xca62b000-0xcaa51fff]
[ 0.038142] PM: Registered nosave memory: [mem 0xdd7d9000-0xdd9e0fff]
[ 0.038142] PM: Registered nosave memory: [mem 0xdd9e1000-0xdd9f6fff]
[ 0.038143] PM: Registered nosave memory: [mem 0xdd9f7000-0xddf32fff]
[ 0.038143] PM: Registered nosave memory: [mem 0xddf33000-0xdeffefff]
[ 0.038144] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.038145] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.038145] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.038146] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.038146] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.038146] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.038147] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.038147] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.038148] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.038148] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.038148] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.038149] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.038150] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.038151] Booting paravirtualized kernel on bare hardware
[ 0.038154] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.038158] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.038302] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.038308] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.038308] pcpu-alloc: [0] 0 1 2 3
[ 0.038332] Built 1 zonelists, mobility grouping on. Total pages: 2049060
[ 0.038333] Policy zone: Normal
[ 0.038334] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=0b8cac27-a007-4e7c-8291-f75bb37bc4f1 ro quiet splash vt.handoff=7
[ 0.038769] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.038967] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.039007] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.041990] Calgary: detecting Calgary via BIOS EBDA area
[ 0.041991] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.062293] Memory: 7992936K/8326432K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 333496K reserved, 0K cma-reserved)
[ 0.062299] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.062413] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.062424] Kernel/User page tables isolation: enabled
[ 0.062436] ftrace: allocating 44527 entries in 174 pages
[ 0.076845] rcu: Hierarchical RCU implementation.
[ 0.076846] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.076847] Tasks RCU enabled.
[ 0.076847] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.076848] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.079201] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.079470] random: crng done (trusting CPU's manufacturer)
[ 0.079485] vt handoff: transparent VT on vt#7
[ 0.079490] Console: colour dummy device 80x25
[ 0.079494] printk: console [tty0] enabled
[ 0.079508] ACPI: Core revision 20190816
[ 0.079598] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.079607] APIC: Switch to symmetric I/O mode setup
[ 0.079671] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.080055] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099608] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28447c42297, max_idle_ns: 440795288309 ns
[ 0.099611] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.11 BogoMIPS (lpj=11174236)
[ 0.099613] pid_max: default: 32768 minimum: 301
[ 0.099639] LSM: Security Framework initializing
[ 0.099647] Yama: becoming mindful.
[ 0.099670] AppArmor: AppArmor initialized
[ 0.099707] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.099720] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.099732] *** VALIDATE tmpfs ***
[ 0.099849] *** VALIDATE proc ***
[ 0.099889] *** VALIDATE cgroup1 ***
[ 0.099890] *** VALIDATE cgroup2 ***
[ 0.099936] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.099949] process: using mwait in idle threads
[ 0.099952] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.099952] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.099954] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.099955] Spectre V2 : Mitigation: Full generic retpoline
[ 0.099956] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.099956] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.099957] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.099958] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.099961] SRBDS: Mitigation: Microcode
[ 0.099961] MDS: Mitigation: Clear CPU buffers
[ 0.100110] Freeing SMP alternatives memory: 40K
[ 0.102895] smpboot: CPU0: Intel(R) Core(TM) i5-4440S CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.102993] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.103007] ... version: 3
[ 0.103008] ... bit width: 48
[ 0.103008] ... generic registers: 8
[ 0.103009] ... value mask: 0000ffffffffffff
[ 0.103009] ... max period: 00007fffffffffff
[ 0.103010] ... fixed-purpose events: 3
[ 0.103010] ... event mask: 00000007000000ff
[ 0.103036] rcu: Hierarchical SRCU implementation.
[ 0.103609] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.103609] smp: Bringing up secondary CPUs ...
[ 0.103609] x86: Booting SMP configuration:
[ 0.103609] .... node #0, CPUs: #1 #2 #3
[ 0.105286] smp: Brought up 1 node, 4 CPUs
[ 0.105286] smpboot: Max logical packages: 1
[ 0.105286] smpboot: Total of 4 processors activated (22348.47 BogoMIPS)
[ 0.105286] devtmpfs: initialized
[ 0.105286] x86/mm: Memory block size: 128MB
[ 0.108088] PM: Registering ACPI NVS region [mem 0xca1d7000-0xca1ddfff] (28672 bytes)
[ 0.108088] PM: Registering ACPI NVS region [mem 0xdd9f7000-0xddf32fff] (5488640 bytes)
[ 0.108088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.108088] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.108088] pinctrl core: initialized pinctrl subsystem
[ 0.108088] PM: RTC time: 20:44:27, date: 2020-10-23
[ 0.108088] NET: Registered protocol family 16
[ 0.108088] audit: initializing netlink subsys (disabled)
[ 0.108088] audit: type=2000 audit(1603485867.028:1): state=initialized audit_enabled=0 res=1
[ 0.108088] EISA bus registered
[ 0.108088] cpuidle: using governor ladder
[ 0.108088] cpuidle: using governor menu
[ 0.108088] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.108088] ACPI: bus type PCI registered
[ 0.108088] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108088] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.108088] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.108088] PCI: Using configuration type 1 for base access
[ 0.108088] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.108088] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.108849] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.108849] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.108849] ACPI: Added _OSI(Module Device)
[ 0.108849] ACPI: Added _OSI(Processor Device)
[ 0.108849] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108849] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.108849] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.108849] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.108849] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.121431] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.122788] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.123400] ACPI: Dynamic OEM Table Load:
[ 0.123404] ACPI: SSDT 0xFFFF9448D51D7800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.124373] ACPI: Dynamic OEM Table Load:
[ 0.124376] ACPI: SSDT 0xFFFF9448D5182800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.125391] ACPI: Dynamic OEM Table Load:
[ 0.125394] ACPI: SSDT 0xFFFF9448D52DE200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.126069] ACPI: Interpreter enabled
[ 0.126069] ACPI: (supports S0 S3 S4 S5)
[ 0.126069] ACPI: Using IOAPIC for interrupt routing
[ 0.126069] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.126069] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.133294] ACPI: Power Resource [FN00] (off)
[ 0.133368] ACPI: Power Resource [FN01] (off)
[ 0.133440] ACPI: Power Resource [FN02] (off)
[ 0.133510] ACPI: Power Resource [FN03] (off)
[ 0.133581] ACPI: Power Resource [FN04] (off)
[ 0.134420] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.134425] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.134707] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.134882] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.134883] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.135346] PCI host bridge to bus 0000:00
[ 0.135348] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.135349] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.135350] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.135351] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.135351] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.135352] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.135353] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.135354] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.135354] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.135355] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.135356] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.135364] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.135450] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.135485] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.135633] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.135651] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[ 0.135704] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.135784] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.135802] pci 0000:00:16.0: reg 0x10: [mem 0xf731a000-0xf731a00f 64bit]
[ 0.135856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.135932] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.135951] pci 0000:00:1a.0: reg 0x10: [mem 0xf7318000-0xf73183ff]
[ 0.136024] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.136106] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.136123] pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
[ 0.136185] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136262] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.136332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136462] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.136532] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.136661] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.136731] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.136862] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.136881] pci 0000:00:1d.0: reg 0x10: [mem 0xf7317000-0xf73173ff]
[ 0.136955] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.137039] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.137206] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.137219] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.137225] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.137231] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.137236] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.137242] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.137248] pci 0000:00:1f.2: reg 0x24: [mem 0xf7316000-0xf73167ff]
[ 0.137277] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137349] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.137364] pci 0000:00:1f.3: reg 0x10: [mem 0xf7315000-0xf73150ff 64bit]
[ 0.137381] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.137497] pci 0000:01:00.0: [10de:1049] type 00 class 0x030000
[ 0.137510] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.137519] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.137526] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.137532] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.137537] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.137629] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[ 0.137641] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.137743] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.137745] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.137747] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.137749] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.137802] acpiphp: Slot [1] registered
[ 0.137806] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.137873] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
[ 0.137905] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.137934] pci 0000:03:00.0: reg 0x18: [mem 0xf7200000-0xf7203fff 64bit]
[ 0.138054] pci 0000:03:00.0: supports D1 D2
[ 0.138055] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138178] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.138180] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.138182] pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.138246] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.138274] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.138300] pci 0000:04:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[ 0.138316] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.138414] pci 0000:04:00.0: supports D1 D2
[ 0.138415] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138521] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.138523] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.138525] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.138529] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.139244] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.139301] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.139357] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.139412] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.139468] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.139525] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.139581] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.139637] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.143620] iommu: Default domain type: Translated
[ 0.143744] SCSI subsystem initialized
[ 0.143754] libata version 3.00 loaded.
[ 0.143754] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.143754] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.143754] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.143754] vgaarb: loaded
[ 0.143754] ACPI: bus type USB registered
[ 0.143754] usbcore: registered new interface driver usbfs
[ 0.143754] usbcore: registered new interface driver hub
[ 0.143754] usbcore: registered new device driver usb
[ 0.143754] pps_core: LinuxPPS API ver. 1 registered
[ 0.143754] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.143754] PTP clock support registered
[ 0.143754] EDAC MC: Ver: 3.0.0
[ 0.143754] PCI: Using ACPI for IRQ routing
[ 0.145026] PCI: pci_cache_line_size set to 64 bytes
[ 0.145062] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.145063] e820: reserve RAM buffer [mem 0xca1d7000-0xcbffffff]
[ 0.145064] e820: reserve RAM buffer [mem 0xca62b000-0xcbffffff]
[ 0.145064] e820: reserve RAM buffer [mem 0xdd7d9000-0xdfffffff]
[ 0.145065] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.145066] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.145145] NetLabel: Initializing
[ 0.145146] NetLabel: domain hash size = 128
[ 0.145146] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.145157] NetLabel: unlabeled traffic allowed by default
[ 0.145169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.145173] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.148627] clocksource: Switched to clocksource tsc-early
[ 0.159662] *** VALIDATE bpf ***
[ 0.159729] VFS: Disk quotas dquot_6.6.0
[ 0.159743] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.159764] *** VALIDATE ramfs ***
[ 0.159766] *** VALIDATE hugetlbfs ***
[ 0.159833] AppArmor: AppArmor Filesystem Enabled
[ 0.159857] pnp: PnP ACPI init
[ 0.159964] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.159969] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.160175] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.160176] system 00:01: [io 0xffff] has been reserved
[ 0.160177] system 00:01: [io 0xffff] has been reserved
[ 0.160178] system 00:01: [io 0xffff] has been reserved
[ 0.160179] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.160180] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.160181] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.160182] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.160184] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.160185] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.160188] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160207] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.160253] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.160256] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.160351] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.160354] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160400] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.160402] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160883] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.160884] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.160885] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.160886] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.160887] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.160888] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.160889] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.160890] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.160891] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.160892] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.160893] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.160894] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.160897] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161212] pnp: PnP ACPI: found 7 devices
[ 0.162181] thermal_sys: Registered thermal governor 'fair_share'
[ 0.162181] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.162182] thermal_sys: Registered thermal governor 'step_wise'
[ 0.162183] thermal_sys: Registered thermal governor 'user_space'
[ 0.162183] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.166668] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.166694] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.166696] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.166697] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.166706] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[ 0.166711] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.166712] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.166715] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.166716] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.166718] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.166720] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.166723] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.166724] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.166727] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.166730] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.166734] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.166735] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.166738] pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.166744] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.166745] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.166748] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.166751] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.166756] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.166757] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.166757] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.166758] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.166759] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.166760] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.166761] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.166762] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.166762] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.166763] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.166764] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.166765] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.166766] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.166767] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.166768] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff]
[ 0.166768] pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.166769] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.166770] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.166771] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.166772] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.166773] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.166877] NET: Registered protocol family 2
[ 0.166994] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.167032] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.167138] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.167203] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.167228] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.167248] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.167286] NET: Registered protocol family 1
[ 0.167290] NET: Registered protocol family 44
[ 0.191700] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 23671 usecs
[ 0.215695] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23420 usecs
[ 0.215712] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.215720] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.215729] PCI: CLS 64 bytes, default 64
[ 0.215783] Trying to unpack rootfs image as initramfs...
[ 0.383751] Freeing initrd memory: 90212K
[ 0.383795] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.383797] software IO TLB: mapped [mem 0xd97d9000-0xdd7d9000] (64MB)
[ 0.383977] check: Scanning for low memory corruption every 60 seconds
[ 0.384333] Initialise system trusted keyrings
[ 0.384347] Key type blacklist registered
[ 0.384370] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.385444] zbud: loaded
[ 0.385738] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.385860] fuse: init (API version 7.31)
[ 0.385872] *** VALIDATE fuse ***
[ 0.385873] *** VALIDATE fuse ***
[ 0.385947] Platform Keyring initialized
[ 0.389474] Key type asymmetric registered
[ 0.389474] Asymmetric key parser 'x509' registered
[ 0.389480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.389509] io scheduler mq-deadline registered
[ 0.390128] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.390170] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[ 0.390170] vesafb: scrolling: redraw
[ 0.390171] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.390186] vesafb: framebuffer at 0xf1000000, mapped to 0x00000000c5d28d7b, using 7552k, total 7552k
[ 0.390212] fbcon: Deferring console take-over
[ 0.390213] fb0: VESA VGA frame buffer device
[ 0.390222] intel_idle: MWAIT substates: 0x42120
[ 0.390223] intel_idle: v0.4.1 model 0x3C
[ 0.390363] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.390500] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.390516] ACPI: Power Button [PWRB]
[ 0.390540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.390561] ACPI: Power Button [PWRF]
[ 0.391174] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.391175] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.391396] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.391396] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.391541] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.392915] Linux agpgart interface v0.103
[ 0.394362] loop: module loaded
[ 0.394489] libphy: Fixed MDIO Bus: probed
[ 0.394490] tun: Universal TUN/TAP device driver, 1.6
[ 0.394508] PPP generic driver version 2.4.2
[ 0.394538] VFIO - User Level meta-driver version: 0.3
[ 0.394678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.394680] ehci-pci: EHCI PCI platform driver
[ 0.394780] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.394787] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.394795] ehci-pci 0000:00:1a.0: debug port 2
[ 0.398681] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.398689] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7318000
[ 0.411648] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.411681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.411682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.411683] usb usb1: Product: EHCI Host Controller
[ 0.411684] usb usb1: Manufacturer: Linux 5.4.0-52-generic ehci_hcd
[ 0.411684] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.411841] hub 1-0:1.0: USB hub found
[ 0.411846] hub 1-0:1.0: 2 ports detected
[ 0.412055] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.412058] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.412067] ehci-pci 0000:00:1d.0: debug port 2
[ 0.415955] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.415962] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7317000
[ 0.431649] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.431677] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.431678] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.431679] usb usb2: Product: EHCI Host Controller
[ 0.431680] usb usb2: Manufacturer: Linux 5.4.0-52-generic ehci_hcd
[ 0.431680] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.431834] hub 2-0:1.0: USB hub found
[ 0.431838] hub 2-0:1.0: 2 ports detected
[ 0.431959] ehci-platform: EHCI generic platform driver
[ 0.431966] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.431968] ohci-pci: OHCI PCI platform driver
[ 0.431975] ohci-platform: OHCI generic platform driver
[ 0.431981] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.432082] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.432086] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.433124] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.433127] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.433235] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.433235] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.433236] usb usb3: Product: xHCI Host Controller
[ 0.433237] usb usb3: Manufacturer: Linux 5.4.0-52-generic xhci-hcd
[ 0.433238] usb usb3: SerialNumber: 0000:00:14.0
[ 0.433391] hub 3-0:1.0: USB hub found
[ 0.433400] hub 3-0:1.0: 10 ports detected
[ 0.434871] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.434873] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.434875] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.434896] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.434896] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.434897] usb usb4: Product: xHCI Host Controller
[ 0.434898] usb usb4: Manufacturer: Linux 5.4.0-52-generic xhci-hcd
[ 0.434899] usb usb4: SerialNumber: 0000:00:14.0
[ 0.435050] hub 4-0:1.0: USB hub found
[ 0.435055] hub 4-0:1.0: 2 ports detected
[ 0.435254] i8042: PNP: No PS/2 controller found.
[ 0.435422] mousedev: PS/2 mouse device common for all mice
[ 0.435534] rtc_cmos 00:02: RTC can wake from S4
[ 0.435732] rtc_cmos 00:02: registered as rtc0
[ 0.435742] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.435746] i2c /dev entries driver
[ 0.435770] device-mapper: uevent: version 1.0.3
[ 0.435825] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.435838] platform eisa.0: Probing EISA bus 0
[ 0.435839] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.435840] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.435841] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.435841] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.435842] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.435843] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.435843] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.435844] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.435844] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.435845] platform eisa.0: EISA: Detected 0 cards
[ 0.435849] intel_pstate: Intel P-state driver initializing
[ 0.436163] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.436209] drop_monitor: Initializing network drop monitor service
[ 0.436342] NET: Registered protocol family 10
[ 0.441755] Segment Routing with IPv6
[ 0.441781] NET: Registered protocol family 17
[ 0.441845] Key type dns_resolver registered
[ 0.442149] RAS: Correctable Errors collector initialized.
[ 0.442171] microcode: sig=0x306c3, pf=0x2, revision=0x28
[ 0.442227] microcode: Microcode Update Driver: v2.2.
[ 0.442229] IPI shorthand broadcast: enabled
[ 0.442235] sched_clock: Marking stable (441985202, 238885)->(447135686, -4911599)
[ 0.442318] registered taskstats version 1
[ 0.442324] Loading compiled-in X.509 certificates
[ 0.443054] Loaded X.509 cert 'Build time autogenerated kernel key: 9587b8cca0bd5e3ad1c932f4859e23820e37ff94'
[ 0.443075] zswap: loaded using pool lzo/zbud
[ 0.443145] Key type ._fscrypt registered
[ 0.443146] Key type .fscrypt registered
[ 0.447925] Key type big_key registered
[ 0.450220] Key type encrypted registered
[ 0.450222] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.450237] ima: No TPM chip found, activating TPM-bypass!
[ 0.450241] ima: Allocated hash algorithm: sha1
[ 0.450246] ima: No architecture policies found
[ 0.450254] evm: Initialising EVM extended attributes:
[ 0.450255] evm: security.selinux
[ 0.450255] evm: security.SMACK64
[ 0.450256] evm: security.SMACK64EXEC
[ 0.450256] evm: security.SMACK64TRANSMUTE
[ 0.450256] evm: security.SMACK64MMAP
[ 0.450256] evm: security.apparmor
[ 0.450257] evm: security.ima
[ 0.450257] evm: security.capability
[ 0.450258] evm: HMAC attrs: 0x1
[ 0.450723] PM: Magic number: 8:560:751
[ 0.450728] misc uinput: hash matches
[ 0.450736] tty ttyS2: hash matches
[ 0.450817] rtc_cmos 00:02: setting system clock to 2020-10-23T20:44:27 UTC (1603485867)
[ 0.451684] Freeing unused decrypted memory: 2040K
[ 0.452053] Freeing unused kernel image memory: 2716K
[ 0.475682] Write protecting the kernel read-only data: 22528k
[ 0.476110] Freeing unused kernel image memory: 2008K
[ 0.476271] Freeing unused kernel image memory: 1188K
[ 0.484169] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.484170] x86/mm: Checking user space page tables
[ 0.491409] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.491410] Run /init as init process
[ 0.592058] IPMI message handler: version 39.2
[ 0.592406] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[ 0.592410] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.592412] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.592414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.592415] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.592417] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.592419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.592420] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.592425] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.592427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.592427] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.593425] ipmi device interface
[ 0.593725] ahci 0000:00:1f.2: version 3.0
[ 0.593906] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x31 impl SATA mode
[ 0.593908] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[ 0.594214] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.597700] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.599854] cryptd: max_cpu_qlen set to 1000
[ 0.604790] AVX2 version of gcm_enc/dec engaged.
[ 0.604790] AES CTR mode by8 optimization enabled
[ 0.613433] libphy: r8169: probed
[ 0.613623] r8169 0000:04:00.0 eth0: RTL8168g/8111g, e0:3f:49:e6:62:7d, XID 4c0, IRQ 30
[ 0.613624] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.616280] scsi host0: ahci
[ 0.616610] scsi host1: ahci
[ 0.616795] scsi host2: ahci
[ 0.616917] scsi host3: ahci
[ 0.617018] scsi host4: ahci
[ 0.617138] scsi host5: ahci
[ 0.617174] ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 29
[ 0.617175] ata2: DUMMY
[ 0.617176] ata3: DUMMY
[ 0.617176] ata4: DUMMY
[ 0.617178] ata5: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316300 irq 29
[ 0.617179] ata6: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316380 irq 29
[ 0.636608] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 0.640819] nvidia: loading out-of-tree module taints kernel.
[ 0.640825] nvidia: module license 'NVIDIA' taints kernel.
[ 0.640826] Disabling lock debugging due to kernel taint
[ 0.645104] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 0.649737] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 0.650086] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 0.650174] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.138 Thu May 14 01:01:53 PDT 2020 (using threaded interrupts)
[ 0.651598] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.138 Thu May 14 04:02:47 PDT 2020
[ 0.652256] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 0.652258] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 0.747650] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.767652] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.771649] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.904024] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 0.904026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.904257] hub 1-1:1.0: USB hub found
[ 0.904347] hub 1-1:1.0: 4 ports detected
[ 0.917196] usb 3-1: New USB device found, idVendor=2013, idProduct=0245, bcdDevice= 1.00
[ 0.917198] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.917199] usb 3-1: Product: PCTV 73e SE
[ 0.917200] usb 3-1: Manufacturer: PCTV Systems
[ 0.917201] usb 3-1: SerialNumber: 0000000M03J1417
[ 0.931657] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.931671] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.931683] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.932023] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 0.932025] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.932235] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.932243] No Local Variables are initialized for Method [_GTF]
[ 0.932244] No Arguments are initialized for method [_GTF]
[ 0.932246] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.932265] hub 2-1:1.0: USB hub found
[ 0.932347] hub 2-1:1.0: 6 ports detected
[ 0.932671] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA7L0, max UDMA/133
[ 0.932672] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.932911] ata6.00: ATA-9: SSD PLUS 480GB, Z31000RL, max UDMA/133
[ 0.932912] ata6.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.933482] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.933489] No Local Variables are initialized for Method [_GTF]
[ 0.933490] No Arguments are initialized for method [_GTF]
[ 0.933491] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.933841] ata1.00: configured for UDMA/133
[ 0.933941] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A7L0 PQ: 0 ANSI: 5
[ 0.934061] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.934108] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.934109] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.934131] sd 0:0:0:0: [sda] Write Protect is off
[ 0.934132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.934163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.934211] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.934217] No Local Variables are initialized for Method [_GTF]
[ 0.934218] No Arguments are initialized for method [_GTF]
[ 0.934220] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.934226] ata5.00: ATAPI: ASUS DVD RAM GHB1N, AS00, max UDMA/133
[ 0.934233] ata6.00: configured for UDMA/133
[ 0.935698] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.935703] No Local Variables are initialized for Method [_GTF]
[ 0.935703] No Arguments are initialized for method [_GTF]
[ 0.935704] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.935711] ata5.00: configured for UDMA/133
[ 0.940804] scsi 4:0:0:0: CD-ROM ASUS DVD RAM GHB1N AS00 PQ: 0 ANSI: 5
[ 1.008152] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.008154] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.013421] sda: sda5 sda6 sda8
[ 1.013796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.023838] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.023926] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.024137] scsi 5:0:0:0: Direct-Access ATA SSD PLUS 480GB 00RL PQ: 0 ANSI: 5
[ 1.024416] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1.024493] sd 5:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.024503] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.024505] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.024533] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.040311] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.040723] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.043770] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 1.192550] usb 3-2: New USB device found, idVendor=1058, idProduct=0910, bcdDevice= 1.06
[ 1.192552] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.192553] usb 3-2: Product: External HDD
[ 1.192553] usb 3-2: Manufacturer: Western Digital
[ 1.192554] usb 3-2: SerialNumber: 574341533837333531333337
[ 1.319650] usb 3-4: new high-speed USB device number 4 using xhci_hcd
[ 1.391650] tsc: Refined TSC clocksource calibration: 2793.530 MHz
[ 1.391653] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284460f1a18, max_idle_ns: 440795261562 ns
[ 1.391675] clocksource: Switched to clocksource tsc
[ 1.468916] usb 3-4: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
[ 1.468917] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.468918] usb 3-4: Product: USB2.0 Hub
[ 1.469795] hub 3-4:1.0: USB hub found
[ 1.470063] hub 3-4:1.0: 4 ports detected
[ 1.599648] usb 3-5: new full-speed USB device number 5 using xhci_hcd
[ 1.748926] usb 3-5: New USB device found, idVendor=13d3, idProduct=3414, bcdDevice= 2.00
[ 1.748928] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.748929] usb 3-5: Product: Bluetooth Radio
[ 1.748929] usb 3-5: Manufacturer: Realtek
[ 1.748930] usb 3-5: SerialNumber: 00e04c000001
[ 1.827648] usb 3-4.2: new high-speed USB device number 6 using xhci_hcd
[ 1.928453] usb 3-4.2: New USB device found, idVendor=1908, idProduct=2310, bcdDevice= 1.00
[ 1.928454] usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.928455] usb 3-4.2: Product: USB2.0 PC CAMERA
[ 1.928456] usb 3-4.2: Manufacturer: Generic
[ 1.928457] usb 3-4.2: SerialNumber: 20100331010203
[ 2.055647] usb 3-6: new high-speed USB device number 7 using xhci_hcd
[ 2.205423] usb 3-6: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
[ 2.205424] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.205425] usb 3-6: Product: Flash Card Reader/Writer
[ 2.205426] usb 3-6: Manufacturer: Generic
[ 2.205427] usb 3-6: SerialNumber: 058F63666479
[ 2.283648] usb 3-4.3: new low-speed USB device number 8 using xhci_hcd
[ 2.388038] usb 3-4.3: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[ 2.388039] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.388040] usb 3-4.3: Product: Optical USB Mouse
[ 2.388041] usb 3-4.3: Manufacturer: Logitech
[ 2.511648] usb 3-8: new high-speed USB device number 9 using xhci_hcd
[ 2.661904] usb 3-8: New USB device found, idVendor=18a5, idProduct=0420, bcdDevice= 5.10
[ 2.661905] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.661906] usb 3-8: Product: Portable Drive
[ 2.661907] usb 3-8: Manufacturer: Verbatim
[ 2.661908] usb 3-8: SerialNumber: 1810251600006221
[ 2.668023] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2.669081] scsi host6: usb-storage 3-2:1.0
[ 2.669188] usb-storage 3-6:1.0: USB Mass Storage device detected
[ 2.669560] scsi host7: usb-storage 3-6:1.0
[ 2.669663] usb-storage 3-8:1.0: USB Mass Storage device detected
[ 2.669900] scsi host8: usb-storage 3-8:1.0
[ 2.669957] usbcore: registered new interface driver usb-storage
[ 2.671051] usbcore: registered new interface driver uas
[ 2.967656] usb 3-4.4: new low-speed USB device number 10 using xhci_hcd
[ 3.073819] usb 3-4.4: New USB device found, idVendor=04ca, idProduct=0020, bcdDevice= 1.09
[ 3.073820] usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.073821] usb 3-4.4: Product: USB Keyboard
[ 3.073822] usb 3-4.4: Manufacturer: LITEON Technology
[ 3.086829] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.096286] usbcore: registered new interface driver usbhid
[ 3.096287] usbhid: USB HID core driver
[ 3.099185] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:046D:C016.0001/input/input2
[ 3.099277] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-4.3/input0
[ 3.099399] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.0/0003:04CA:0020.0002/input/input3
[ 3.155823] hid-generic 0003:04CA:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:14.0-4.4/input0
[ 3.155935] input: LITEON Technology USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:04CA:0020.0003/input/input4
[ 3.215783] input: LITEON Technology USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:04CA:0020.0003/input/input5
[ 3.215935] hid-generic 0003:04CA:0020.0003: input,hidraw2: USB HID v1.10 Device [LITEON Technology USB Keyboard] on usb-0000:00:14.0-4.4/input1
[ 3.330671] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.516531] systemd[1]: Inserted module 'autofs4'
[ 3.529972] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.547709] systemd[1]: Detected architecture x86-64.
[ 3.575930] systemd[1]: Set hostname to <robert-M11AD>.
[ 3.676827] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 3.694784] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 3.696083] scsi 6:0:0:0: Direct-Access WD 5000AAK External 1.06 PQ: 0 ANSI: 0
[ 3.696259] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.696447] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.696537] scsi 7:0:0:0: Direct-Access Generic- Multiple Reader 1.11 PQ: 0 ANSI: 4
[ 3.696615] scsi 8:0:0:0: Direct-Access ST500LM0 30-2E717D SDM1 PQ: 0 ANSI: 6
[ 3.696655] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 3.696743] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 3.696914] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.696915] sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 3.697075] sd 8:0:0:0: [sde] 976773164 512-byte logical blocks: (500 GB/466 GiB)
[ 3.697342] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 3.697345] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.697445] sd 8:0:0:0: [sde] Write Protect is off
[ 3.697446] sd 8:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 3.697800] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.716811] sdc: sdc1
[ 3.717185] systemd[1]: /lib/systemd/system/gpsd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/gpsd.sock → /run/gpsd.sock; please update the unit file accordingly.
[ 3.718011] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.720119] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 3.743099] systemd[1]: Created slice system-modprobe.slice.
[ 3.743278] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.743429] systemd[1]: Created slice User and Session Slice.
[ 3.743480] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.743649] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.743698] systemd[1]: Reached target User and Group Name Lookups.
[ 3.743709] systemd[1]: Reached target Remote File Systems.
[ 3.743716] systemd[1]: Reached target Slices.
[ 3.745132] systemd[1]: Listening on Syslog Socket.
[ 3.745203] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.745246] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.745390] systemd[1]: Listening on Journal Audit Socket.
[ 3.745458] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.745534] systemd[1]: Listening on Journal Socket.
[ 3.745611] systemd[1]: Listening on udev Control Socket.
[ 3.745671] systemd[1]: Listening on udev Kernel Socket.
[ 3.746432] systemd[1]: Mounting Huge Pages File System...
[ 3.747194] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.748091] systemd[1]: Mounting Kernel Debug File System...
[ 3.748932] systemd[1]: Mounting Kernel Trace File System...
[ 3.750105] systemd[1]: Starting Journal Service...
[ 3.750915] systemd[1]: Starting Set the console keyboard layout...
[ 3.751858] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.751918] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 3.752561] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.752590] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.755442] systemd[1]: Starting Load Kernel Modules...
[ 3.756180] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.756933] systemd[1]: Starting udev Coldplug all Devices...
[ 3.757655] systemd[1]: Starting Uncomplicated firewall...
[ 3.758383] systemd[1]: Started Read required files in advance.
[ 3.760250] systemd[1]: Mounted Huge Pages File System.
[ 3.760436] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.760738] systemd[1]: Mounted Kernel Debug File System.
[ 3.761287] systemd[1]: Mounted Kernel Trace File System.
[ 3.761742] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.762320] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 3.763953] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.764747] systemd[1]: Activating swap /swapfile...
[ 3.766294] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.766341] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.767074] systemd[1]: Starting Load/Save Random Seed...
[ 3.768315] systemd[1]: Starting Create System Users...
[ 3.774399] lp: driver loaded but no devices found
[ 3.780083] systemd[1]: Finished Uncomplicated firewall.
[ 3.785020] systemd[1]: Finished Load/Save Random Seed.
[ 3.791442] ppdev: user-space parallel port driver
[ 3.804337] systemd[1]: Finished Create System Users.
[ 3.805137] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.806721] systemd[1]: Finished Load Kernel Modules.
[ 3.807624] systemd[1]: Mounting FUSE Control File System...
[ 3.808461] systemd[1]: Mounting Kernel Configuration File System...
[ 3.809210] systemd[1]: Starting Apply Kernel Variables...
[ 3.810657] systemd[1]: Mounted FUSE Control File System.
[ 3.810785] systemd[1]: Mounted Kernel Configuration File System.
[ 3.832858] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.833816] systemd[1]: Starting udev Kernel Device Manager...
[ 3.834301] systemd[1]: Finished Set the console keyboard layout.
[ 3.834446] systemd[1]: Reached target Local File Systems (Pre).
[ 3.844902] systemd[1]: Mounting Mount unit for arduino, revision 41...
[ 3.852144] systemd[1]: Mounting Mount unit for chromium, revision 1350...
[ 3.854424] systemd[1]: Mounting Mount unit for chromium, revision 1362...
[ 3.858005] systemd[1]: Mounting Mount unit for core, revision 10126...
[ 3.859892] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.861190] systemd[1]: Mounting Mount unit for core, revision 10185...
[ 3.864997] systemd[1]: Mounting Mount unit for core18, revision 1880...
[ 3.867572] systemd[1]: Mounting Mount unit for core18, revision 1885...
[ 3.871553] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 145...
[ 3.874313] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
[ 3.877449] systemd[1]: Mounting Mount unit for pulsemixer, revision 250...
[ 3.878456] systemd[1]: Mounting Mount unit for pulsemixer, revision 283...
[ 3.880319] systemd[1]: Mounting Mount unit for skype, revision 153...
[ 3.881517] systemd[1]: Mounting Mount unit for skype, revision 156...
[ 3.883550] systemd[1]: Mounting Mount unit for software-boutique, revision 39...
[ 3.887466] systemd[1]: Mounting Mount unit for software-boutique, revision 54...
[ 3.891573] systemd[1]: Mounting Mount unit for ubuntu-mate-welcome, revision 571...
[ 3.892528] systemd[1]: Mounting Mount unit for ubuntu-mate-welcome, revision 575...
[ 3.892616] systemd[1]: Activated swap /swapfile.
[ 3.894657] systemd[1]: Started Journal Service.
[ 3.904609] systemd-journald[393]: Received client request to flush runtime journal.
[ 4.351676] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238
[ 4.408098] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.409353] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[ 4.409486] caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
[ 4.412150] mc: Linux media interface: v0.10
[ 4.414541] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.432566] Bluetooth: Core ver 2.22
[ 4.432579] NET: Registered protocol family 31
[ 4.432579] Bluetooth: HCI device and connection manager initialized
[ 4.432582] Bluetooth: HCI socket layer initialized
[ 4.432583] Bluetooth: L2CAP socket layer initialized
[ 4.432585] Bluetooth: SCO socket layer initialized
[ 4.444929] videodev: Linux video capture interface: v2.00
[ 4.727680] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 4.727803] caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
[ 4.744276] asus_wmi: ASUS WMI generic driver loaded
[ 4.751749] asus_wmi: Initialization: 0x0
[ 4.751782] asus_wmi: BIOS WMI version: 0.9
[ 4.751837] asus_wmi: SFUN value: 0x0
[ 4.751840] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 4.753247] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 4.754812] usbcore: registered new interface driver btusb
[ 4.759209] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
[ 4.760622] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 4.760624] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin
[ 4.761877] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (1908:2310)
[ 4.762780] uvcvideo 3-4.2:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.762781] uvcvideo 3-4.2:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.763189] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_config.bin
[ 4.763205] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2
[ 4.763210] Bluetooth: hci0: RTL: cfg_sz -2, total sz 17428
[ 4.768620] input: USB2.0 PC CAMERA: USB2.0 PC CAM as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input7
[ 4.768792] usbcore: registered new interface driver uvcvideo
[ 4.768792] USB Video Class driver (1.1.1)
[ 4.791551] dvb-usb: found a 'Pinnacle PCTV 73e SE' in warm state.
[ 4.791648] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4.792594] dvbdev: DVB: registering new adapter (Pinnacle PCTV 73e SE)
[ 4.792597] usb 3-1: media controller created
[ 4.792843] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 5.022172] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[ 5.022175] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 5.023798] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.024053] rtlwifi: rtlwifi: wireless switch is on
[ 5.167621] Bluetooth: hci0: RTL: fw version 0x0e2fa041
[ 5.299363] sde: sde1 sde2
[ 5.300812] sd 8:0:0:0: [sde] Attached SCSI disk
[ 5.343440] usb 3-1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 5.343445] dvbdev: dvb_create_media_entity: media entity 'DiBcom 7000PC' registered.
[ 5.566242] dib0070: DiB0070: successfully identified
[ 5.702322] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 5.702323] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.702323] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.702324] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.735631] Registered IR keymap rc-dib0700-rc5
[ 5.735741] rc rc0: Pinnacle PCTV 73e SE as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0
[ 5.735783] rc rc0: lirc_dev: driver dib0700 registered at minor = 0, scancode receiver, no transmitter
[ 5.735816] input: Pinnacle PCTV 73e SE as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0/input8
[ 5.735884] dvb-usb: schedule remote query interval to 50 msecs.
[ 5.735885] dvb-usb: Pinnacle PCTV 73e SE successfully initialized and connected.
[ 5.736013] usbcore: registered new interface driver dvb_usb_dib0700
[ 5.737534] usbcore: registered new interface driver snd-usb-audio
[ 5.844602] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.844607] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.853166] kvm: disabled by bios
[ 5.872384] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 5.872386] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.872387] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.872388] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.872389] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 5.872389] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.872390] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.872391] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.872392] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.917123] kvm: disabled by bios
[ 5.917208] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.917249] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.917303] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.917348] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.917388] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.981390] kvm: disabled by bios
[ 6.029521] kvm: disabled by bios
[ 6.050706] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.129376] intel_rapl_common: Found RAPL domain package
[ 6.129377] intel_rapl_common: Found RAPL domain core
[ 6.129378] intel_rapl_common: Found RAPL domain dram
[ 6.420037] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[ 6.420086] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[ 6.604704] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 6.632184] audit: type=1400 audit(1603485873.676:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1098 comm="apparmor_parser"
[ 6.642629] audit: type=1400 audit(1603485873.684:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1096 comm="apparmor_parser"
[ 6.642631] audit: type=1400 audit(1603485873.684:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1096 comm="apparmor_parser"
[ 6.643256] audit: type=1400 audit(1603485873.684:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1097 comm="apparmor_parser"
[ 6.643258] audit: type=1400 audit(1603485873.684:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1097 comm="apparmor_parser"
[ 6.643259] audit: type=1400 audit(1603485873.684:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1097 comm="apparmor_parser"
[ 6.643803] audit: type=1400 audit(1603485873.688:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1104 comm="apparmor_parser"
[ 6.646096] audit: type=1400 audit(1603485873.688:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1105 comm="apparmor_parser"
[ 6.648967] audit: type=1400 audit(1603485873.692:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1108 comm="apparmor_parser"
[ 6.648970] audit: type=1400 audit(1603485873.692:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1108 comm="apparmor_parser"
[ 7.020062] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.020063] Bluetooth: BNEP filters: protocol multicast
[ 7.020066] Bluetooth: BNEP socket layer initialized
[ 7.030173] NET: Registered protocol family 38
[ 7.190100] Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[ 7.333750] r8169 0000:04:00.0 enp4s0: Link is Down
[ 7.805126] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 7.805262] caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
[ 9.000866] r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control off
[ 9.000873] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 10.252560] Bluetooth: RFCOMM TTY layer initialized
[ 10.252565] Bluetooth: RFCOMM socket layer initialized
[ 10.252568] Bluetooth: RFCOMM ver 1.11
[ 11.292062] wlp3s0: authenticate with ac:3b:77:5f:5f:d0
[ 11.292380] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 1/3)
[ 11.395629] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 2/3)
[ 11.504410] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 3/3)
[ 11.607635] wlp3s0: authentication with ac:3b:77:5f:5f:d0 timed out
[ 11.905765] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.876891] wlp3s0: authenticate with ac:3b:77:5f:5f:d4
[ 14.877289] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 1/3)
[ 14.979698] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 2/3)
[ 15.083689] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 3/3)
[ 15.187681] wlp3s0: authentication with ac:3b:77:5f:5f:d4 timed out
[ 18.404158] wlp3s0: authenticate with ac:3b:77:5f:5f:d0
[ 18.404528] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 1/3)
[ 18.406175] wlp3s0: authenticated
[ 18.407649] wlp3s0: associate with ac:3b:77:5f:5f:d0 (try 1/3)
[ 18.419103] wlp3s0: RX AssocResp from ac:3b:77:5f:5f:d0 (capab=0x411 status=0 aid=3)
[ 18.419301] wlp3s0: associated
[ 18.465108] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes readyHors ligne
#31 Le 06/04/2021, à 17:52
- Saturnin51
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
J'ai contourné le problème. Après appairage, je lance la commande sudo rfcomm bind 0 98:D3:71:F5:F4:58 1 en italique l'adresse du matériel. ET la connexion se fait.
Dernière modification par Saturnin51 (Le 06/04/2021, à 17:52)
Hors ligne
#32 Le 06/04/2021, à 18:22
- Nuliel
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
Merci pour ton retour, je ne connaissais pas cette commande
Hors ligne
#33 Le 29/01/2023, à 09:52
- ykerb
Re : [Résolu]Bluetooth: Device added successfully, but failed to connect
Bonjour et merci pour le sujet.
Dans la même situation, j'ai passé la commande.
Ça n'a pas permit d'établir la connection via l'applet 'Installation' du système.
Par contre j'ai pu établir la connection dans les paramètres systèmes, choix "Bluetooth" , sélection du périphérique dans la liste et "connecter" .
Hors ligne