Pages : 1
#1 Le 26/11/2021, à 22:40
- joeletouffu
[Résolu]Ubuntu lent au démarrage
Bonjour,
j'ai fais une installe ubuntu 20 sur un ancien ordinateur Dell inspirion 5521 et le démarrage est très lent, j'ai pas calculé exactement le temps mais il est largement supérieur a l'ancienne installe windows.
J'ai fais un boot-info mais j'avoue ne pas vraiment comprendre le résultat, je ne comprends pas s'il y a un problème ni comment le résoudre le cas échéant.
Voici le résultat :
boot-info-4ppa130 [20211126_0727]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
================================ 1 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession on sda5
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.11.0-40-generic root=UUID=f77c603a-f6cb-4730-b09d-63d9c6c31cc6 ro quiet splash vt.handoff=7
===================================== UEFI =====================================
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.019500] ACPI: UEFI 0x000000009AFFC000 000236 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.019604] ACPI: Reserving UEFI table memory at [mem 0x9affc000-0x9affc235]
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda5 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sda5 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda5 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 698.65 GiB, 750156374016 bytes, 1465149168 sectors
Disk identifier: 0x6fc2bccf
Boot Start End Sectors Size Id Type
sda1 * 2048 1050623 1048576 512M b W95 FAT32
sda2 1052670 1465147391 1464094722 698.1G 5 Extended
sda5 1052672 1465147391 1464094720 698.1G 83 Linux
parted -lm (filtered): _________________________________________________________
sda:750GB:scsi:512:512:msdos:ATA ST750LM022 HN-M7:;
1:1049kB:538MB:537MB:fat32::boot;
2:539MB:750GB:750GB:::;
5:539MB:750GB:750GB:ext4::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat A76C-FE89 6fc2bccf-01
├─sda2 6fc2bccf-02
└─sda5 ext4 f77c603a-f6cb-4730-b09d-63d9c6c31cc6 6fc2bccf-05
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 511M 0% /mnt/boot-sav/sda1
sda5 628.9G 3% /
Mount options: __________________________________________________________________
sda1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda5 rw,relatime,errors=remount-ro
====================== sda5/boot/grub/grub.cfg (filtered) ======================
Ubuntu f77c603a-f6cb-4730-b09d-63d9c6c31cc6
Ubuntu, avec Linux 5.11.0-40-generic f77c603a-f6cb-4730-b09d-63d9c6c31cc6
Ubuntu, avec Linux 5.11.0-38-generic f77c603a-f6cb-4730-b09d-63d9c6c31cc6
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda5/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=f77c603a-f6cb-4730-b09d-63d9c6c31cc6 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=A76C-FE89 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
======================= sda5/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda5: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
634,732902527 = 681,539264512 boot/grub/grub.cfg 2
476,634849548 = 511,782772736 boot/grub/i386-pc/core.img 1
25,380073547 = 27,251646464 boot/vmlinuz 1
22,448894501 = 24,104316928 boot/vmlinuz-5.11.0-38-generic 1
25,380073547 = 27,251646464 boot/vmlinuz-5.11.0-40-generic 1
22,448894501 = 24,104316928 boot/vmlinuz.old 1
333,040462494 = 357,599473664 boot/initrd.img 2
477,849605560 = 513,087107072 boot/initrd.img-5.11.0-38-generic 2
333,040462494 = 357,599473664 boot/initrd.img-5.11.0-40-generic 2
477,849605560 = 513,087107072 boot/initrd.img.old 2
===================== sda5: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18151 août 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 mai 20 2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15 2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15 2020 30_os-prober
-rwxr-xr-x 1 root root 1424 avril 15 2020 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 15 2020 40_custom
-rwxr-xr-x 1 root root 216 avril 15 2020 41_custom
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi-amd64-signed of
sda5,
using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Blockers in case of suggested repair: __________________________________________
The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. This will enable this feature.
Confirmation request before suggested repair: __________________________________
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to EFI mode.
Alternatively, you may want to retry after deactivating the [Separate /usr partition:] option.
Are you sure you want to continue anyway?
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession entry (sda1/efi/****/shim****.efi (**** will be updated in the final message) file) !
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.Merci pour votre aide.
Dernière modification par joeletouffu (Le 28/11/2021, à 13:27)
Hors ligne
#2 Le 27/11/2021, à 09:42
- malbo
Re : [Résolu]Ubuntu lent au démarrage
Bonjour,
Malgré tout ce qu'on peut lire après la ligne "Suggested repair" du Boot-info que tu as collé dans ton post #1, ton installation est correcte : c'est exactement ce qu'on obtient avec le choix "Effacer le disque et installer Ubuntu" lors de l'installation de Ubuntu 20.04 (je l'ai expérimenté dans ce post). C'est à dire, une partition sda1 en FAT32 et une partition logique sda5 en EXT4 contenue dans une partition étendue sda2.
Pour investiguer ton problème de lenteur, ce serait utile de commencer par vérifier l'état du disque dur. Pour ce faire, je te prie de réaliser ce que j'ai détaillé dans ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280
Dernière modification par malbo (Le 27/11/2021, à 09:42)
Hors ligne
#3 Le 27/11/2021, à 10:21
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
Bonjour,
merci pour cette réponse, voici le résultat du tuto
➜ ~ sudo parted -l
Modèle : ATA ST750LM022 HN-M7 (scsi)
Disque /dev/sda : 750GB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : msdos
Drapeaux de disque :
Numéro Début Fin Taille Type Système de fichiers Drapeaux
1 1049kB 538MB 537MB primary fat32 démarrage
2 539MB 750GB 750GB extended
5 539MB 750GB 750GB logical ext4
➜ ~ sudo smartctl -a /dev/sdc
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-40-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdc failed: No such device
➜ ~ sudo smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-40-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST750LM022 HN-M750MBB
Serial Number: S2X2J90D208211
LU WWN Device Id: 5 0004cf 209b32dd9
Firmware Version: 2AR20004
User Capacity: 750156374016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Nov 27 10:15:02 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9180) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 83
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 8348
3 Spin_Up_Time 0x0023 089 085 025 Pre-fail Always - 3464
4 Start_Stop_Count 0x0032 083 083 000 Old_age Always - 17730
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10293
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 200
12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 6693
13 Read_Soft_Error_Rate 0x003a 100 100 000 Old_age Always - 0
181 Program_Fail_Cnt_Total 0x0022 099 099 000 Old_age Always - 22833214
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 435
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 222062
194 Temperature_Celsius 0x0002 064 051 000 Old_age Always - 24 (Min/Max 6/49)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 86
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 370
240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 10204
241 Total_LBAs_Written 0x0032 096 091 000 Old_age Always - 6765433
242 Total_LBAs_Read 0x0032 097 088 000 Old_age Always - 5039812
254 Free_Fall_Sensor 0x0032 252 252 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 6467 hours (269 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 00 00 40
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
01 9f 18 9f 18 f0 18 9f 10:54:18.685 [RESERVED]
00 00 00 00 00 00 00 00 00:00:18.957 NOP [Abort queued commands]
61 00 07 98 3b 54 40 00 00:00:19.005 WRITE FPDMA QUEUED
61 00 08 18 cd 71 40 00 00:00:19.005 WRITE FPDMA QUEUED
61 00 08 90 f7 70 40 00 00:00:19.005 WRITE FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 4591 hours (191 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:00:00.024 IDENTIFY DEVICE
00 00 00 00 00 00 00 00 00:00:00.024 NOP [Abort queued commands]
00 00 40 10 ff 5f 40 00 00:00:00.024 NOP [Abort queued commands]
60 00 40 10 ff 5f 40 00 00:00:00.023 READ FPDMA QUEUED
61 00 08 e8 b0 ad 40 00 00:00:00.023 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10202 -
# 2 Short offline Completed without error 00% 10200 -
# 3 Short offline Interrupted (host reset) 70% 10116 -
# 4 Short offline Completed without error 00% 5419 -
# 5 Short offline Completed without error 00% 4996 -
# 6 Short offline Completed without error 00% 4535 -
# 7 Short offline Completed without error 00% 4270 -
# 8 Short offline Completed without error 00% 4114 -
# 9 Short offline Completed without error 00% 3924 -
#10 Short offline Completed without error 00% 3778 -
#11 Short offline Completed without error 00% 3564 -
#12 Short offline Completed without error 00% 3281 -
#13 Short offline Completed without error 00% 3141 -
#14 Short offline Completed without error 00% 2930 -
#15 Short offline Completed without error 00% 2293 -
#16 Short offline Completed without error 00% 2093 -
#17 Short offline Completed without error 00% 1972 -
#18 Short offline Completed without error 00% 1159 -
#19 Short offline Completed without error 00% 803 -
#20 Short offline Completed without error 00% 209 -
#21 Short offline Completed without error 00% 41 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Hors ligne
#4 Le 27/11/2021, à 11:02
- FrancisFDZ
Re : [Résolu]Ubuntu lent au démarrage
Bonjour,
Je trouve ça bizarre
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.153 mn, soit 2h 33mn ! Je suppose que ça devrait être le temps max d'attente par le programme avant de conclure à une erreur : j'ai bon ?
[Edit] traduction google ; "recommended polling time" => "heure d'interrogation recommandée", ça semble confirmer mon hypothèse , d'où en conclusion : rien à voir avec le problème (à confirmer) {/Edit]
Dernière modification par FrancisFDZ (Le 27/11/2021, à 11:19)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#5 Le 27/11/2021, à 13:19
- iznobe
Re : [Résolu]Ubuntu lent au démarrage
Bonjour c ' est un disque dur dans un ordi portable ?
il arrive souvent que tu deplaces ton portable alors qu ' il est en route ? a priori oui .
les HDD a plateaux n' aiment pas ca du tout ! ca cree des deplacements incontrolés de la tete de lecture qui provoque des erreurs de lecture ou d ' ecriture .
de plus , je ne sais pas , ca doit etre lié a la gestion de l' economie d ' energie du portable , le dique s' arrete tres tres souvent , c ' est peut etre normal .
@Malbo t ' en dira certainement plus sur le sujet .
il y a aussi 2 erreurs de type ATA , peut etre du a des chocs ? ou le disque n' est pas bien connecté ?
Dernière modification par iznobe (Le 27/11/2021, à 13:21)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#6 Le 27/11/2021, à 14:07
- malbo
Re : [Résolu]Ubuntu lent au démarrage
Il y a eu quelques soucis sur ce disque comme signalé par iznobe - peut-être des chocs - mais ce sont des problèmes anciens et actuellement le disque dur est en pleine forme à mon avis.
Je te prie de donner le retour des 4 commandes qu'on peut voir dans le paragraphe 3.5 Durée du démarrage de la doc "Diagnostic outil"
A noter : après la 3ème commande (sudo systemd-analyze blame), appuie sur les deux touches Ctrl et C avant de passer la 4ème commande.
Dernière modification par malbo (Le 27/11/2021, à 14:14)
Hors ligne
#7 Le 27/11/2021, à 23:23
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
Oui c'est effectivement un disque dur d'ordi portable, ce n'est pas le miens donc je ne sais qu'elles violences il a pu subir dans sa vie mais c'est probable.
sudo dmesg
[sudo] Mot de passe de elmer :
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Linux version 5.11.0-40-generic (buildd@lgw01-amd64-010) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #44~20.04.2-Ubuntu SMP Tue Oct 26 18:07:44 UTC 2021 (Ubuntu 5.11.0-40.44~20.04.2-generic 5.11.22)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-40-generic root=UUID=f77c603a-f6cb-4730-b09d-63d9c6c31cc6 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000090baffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000090bb0000-0x00000000913affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000913b0000-0x000000009a3befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Inspiron 5521/0N5YWG, BIOS A14 07/31/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1795.765 MHz processor
[ 0.001376] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001382] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001394] last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.001401] MTRR default type: uncachable
[ 0.001403] MTRR fixed ranges enabled:
[ 0.001405] 00000-9FFFF write-back
[ 0.001408] A0000-BFFFF uncachable
[ 0.001410] C0000-E7FFF write-protect
[ 0.001412] E8000-EFFFF write-combining
[ 0.001414] F0000-FFFFF write-protect
[ 0.001416] MTRR variable ranges enabled:
[ 0.001417] 0 base 000000000 mask F80000000 write-back
[ 0.001421] 1 base 080000000 mask FE0000000 write-back
[ 0.001424] 2 base 09B000000 mask FFF000000 uncachable
[ 0.001426] 3 base 09C000000 mask FFC000000 uncachable
[ 0.001428] 4 base 0FFA00000 mask FFFE00000 write-protect
[ 0.001431] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.001433] 6 base 100000000 mask F00000000 write-back
[ 0.001435] 7 base 200000000 mask F80000000 write-back
[ 0.001438] 8 base 25F600000 mask FFFE00000 uncachable
[ 0.001440] 9 base 25F800000 mask FFF800000 uncachable
[ 0.001564] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002370] last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.018068] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.018457] check: Scanning 1 areas for low memory corruption
[ 0.019949] RAMDISK: [mem 0x3110f000-0x3487efff]
[ 0.019959] ACPI: Early table checksum verification disabled
[ 0.019964] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL )
[ 0.019971] ACPI: XSDT 0x000000009AFFE210 0000B4 (v01 DELL CL09 00000001 01000013)
[ 0.019981] ACPI: FACP 0x000000009AFFA000 00010C (v05 DELL CL09 00000001 ASL 00040000)
[ 0.019992] ACPI: DSDT 0x000000009AFED000 009332 (v01 DELL CL09 00000000 ASL 00040000)
[ 0.019998] ACPI: FACS 0x000000009AFB9000 000040
[ 0.020004] ACPI: SLIC 0x000000009AFFD000 000176 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020010] ACPI: UEFI 0x000000009AFFC000 000236 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020016] ACPI: ASF! 0x000000009AFFB000 0000A5 (v32 DELL CL09 00000001 ASL 00040000)
[ 0.020023] ACPI: HPET 0x000000009AFF9000 000038 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020029] ACPI: APIC 0x000000009AFF8000 00008C (v03 DELL CL09 00000001 ASL 00040000)
[ 0.020035] ACPI: MCFG 0x000000009AFF7000 00003C (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020041] ACPI: SLIC 0x000000009AFEC000 000176 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020047] ACPI: SSDT 0x000000009AFEB000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
[ 0.020053] ACPI: BOOT 0x000000009AFE9000 000028 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020059] ACPI: ASPT 0x000000009AFE7000 000034 (v07 DELL CL09 00000001 ASL 00040000)
[ 0.020065] ACPI: DBGP 0x000000009AFE6000 000034 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020071] ACPI: FPDT 0x000000009AFE4000 000044 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020077] ACPI: MSDM 0x000000009AFE3000 000055 (v03 DELL CL09 00000001 ASL 00040000)
[ 0.020083] ACPI: SSDT 0x000000009AFE2000 0008E4 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.020089] ACPI: SSDT 0x000000009AFE1000 000A92 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.020096] ACPI: DMAR 0x000000009AFE0000 0000B8 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.020102] ACPI: SSDT 0x000000009AFDE000 001EED (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
[ 0.020107] ACPI: Reserving FACP table memory at [mem 0x9affa000-0x9affa10b]
[ 0.020110] ACPI: Reserving DSDT table memory at [mem 0x9afed000-0x9aff6331]
[ 0.020111] ACPI: Reserving FACS table memory at [mem 0x9afb9000-0x9afb903f]
[ 0.020113] ACPI: Reserving SLIC table memory at [mem 0x9affd000-0x9affd175]
[ 0.020115] ACPI: Reserving UEFI table memory at [mem 0x9affc000-0x9affc235]
[ 0.020116] ACPI: Reserving ASF! table memory at [mem 0x9affb000-0x9affb0a4]
[ 0.020118] ACPI: Reserving HPET table memory at [mem 0x9aff9000-0x9aff9037]
[ 0.020120] ACPI: Reserving APIC table memory at [mem 0x9aff8000-0x9aff808b]
[ 0.020122] ACPI: Reserving MCFG table memory at [mem 0x9aff7000-0x9aff703b]
[ 0.020123] ACPI: Reserving SLIC table memory at [mem 0x9afec000-0x9afec175]
[ 0.020125] ACPI: Reserving SSDT table memory at [mem 0x9afeb000-0x9afeb6fd]
[ 0.020127] ACPI: Reserving BOOT table memory at [mem 0x9afe9000-0x9afe9027]
[ 0.020128] ACPI: Reserving ASPT table memory at [mem 0x9afe7000-0x9afe7033]
[ 0.020130] ACPI: Reserving DBGP table memory at [mem 0x9afe6000-0x9afe6033]
[ 0.020132] ACPI: Reserving FPDT table memory at [mem 0x9afe4000-0x9afe4043]
[ 0.020134] ACPI: Reserving MSDM table memory at [mem 0x9afe3000-0x9afe3054]
[ 0.020135] ACPI: Reserving SSDT table memory at [mem 0x9afe2000-0x9afe28e3]
[ 0.020137] ACPI: Reserving SSDT table memory at [mem 0x9afe1000-0x9afe1a91]
[ 0.020139] ACPI: Reserving DMAR table memory at [mem 0x9afe0000-0x9afe00b7]
[ 0.020141] ACPI: Reserving SSDT table memory at [mem 0x9afde000-0x9afdfeec]
[ 0.020157] ACPI: Local APIC address 0xfee00000
[ 0.020278] No NUMA configuration found
[ 0.020279] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.020296] NODE_DATA(0) allocated [mem 0x25f5d1000-0x25f5fafff]
[ 0.020923] Zone ranges:
[ 0.020925] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.020928] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.020931] Normal [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.020934] Device empty
[ 0.020936] Movable zone start for each node
[ 0.020942] Early memory node ranges
[ 0.020943] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.020945] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.020947] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.020949] node 0: [mem 0x0000000040005000-0x0000000090baffff]
[ 0.020951] node 0: [mem 0x00000000913b0000-0x000000009a3befff]
[ 0.020952] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.020954] node 0: [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.020957] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[ 0.020960] On node 0 totalpages: 2068315
[ 0.020963] DMA zone: 64 pages used for memmap
[ 0.020964] DMA zone: 21 pages reserved
[ 0.020966] DMA zone: 3996 pages, LIFO batch:0
[ 0.020968] DMA32 zone: 9767 pages used for memmap
[ 0.020970] DMA32 zone: 625087 pages, LIFO batch:63
[ 0.020972] Normal zone: 22488 pages used for memmap
[ 0.020973] Normal zone: 1439232 pages, LIFO batch:63
[ 0.020977] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.021009] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.023149] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.025909] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.026255] On node 0, zone DMA32: 2048 pages in unavailable ranges
[ 0.026309] On node 0, zone DMA32: 3136 pages in unavailable ranges
[ 0.038604] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.038653] On node 0, zone Normal: 2560 pages in unavailable ranges
[ 0.038679] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff]
[ 0.038878] ACPI: PM-Timer IO Port: 0x408
[ 0.038882] ACPI: Local APIC address 0xfee00000
[ 0.038904] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.038910] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.038913] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.038917] ACPI: IRQ0 used by override.
[ 0.038919] ACPI: IRQ9 used by override.
[ 0.038923] Using ACPI (MADT) for SMP configuration information
[ 0.038925] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.038932] TSC deadline timer available
[ 0.038934] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.038970] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.038974] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.038976] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.038977] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.038979] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.038982] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.038985] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.038988] PM: hibernation: Registered nosave memory: [mem 0x90bb0000-0x913affff]
[ 0.038991] PM: hibernation: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
[ 0.038993] PM: hibernation: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.038994] PM: hibernation: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.038997] PM: hibernation: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.038999] PM: hibernation: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.039000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.039002] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.039003] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.039005] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.039006] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.039008] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.039009] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.039011] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.039012] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.039014] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.039015] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.039016] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.039018] PM: hibernation: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.039021] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.039023] Booting paravirtualized kernel on bare hardware
[ 0.039026] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.039038] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.039406] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.039418] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.039422] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.039472] Built 1 zonelists, mobility grouping on. Total pages: 2035975
[ 0.039475] Policy zone: Normal
[ 0.039477] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-40-generic root=UUID=f77c603a-f6cb-4730-b09d-63d9c6c31cc6 ro quiet splash vt.handoff=7
[ 0.040214] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.040524] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.040671] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.073318] Memory: 7963820K/8273260K available (14345K kernel code, 3478K rwdata, 10340K rodata, 2688K init, 5976K bss, 309180K reserved, 0K cma-reserved)
[ 0.073329] random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=0
[ 0.073509] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.073528] Kernel/User page tables isolation: enabled
[ 0.073552] ftrace: allocating 48706 entries in 191 pages
[ 0.100222] ftrace: allocated 191 pages with 7 groups
[ 0.100395] rcu: Hierarchical RCU implementation.
[ 0.100397] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.100400] Rude variant of Tasks RCU enabled.
[ 0.100401] Tracing variant of Tasks RCU enabled.
[ 0.100403] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.100404] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.106938] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.107214] random: crng done (trusting CPU's manufacturer)
[ 0.107244] vt handoff: transparent VT on vt#7
[ 0.107255] Console: colour dummy device 80x25
[ 0.107280] printk: console [tty0] enabled
[ 0.107306] ACPI: Core revision 20201113
[ 0.107505] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.107525] APIC: Switch to symmetric I/O mode setup
[ 0.107528] DMAR: Host address width 36
[ 0.107530] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.107537] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.107541] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.107545] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.107548] DMAR: RMRR base: 0x0000009ae8c000 end: 0x0000009aeabfff
[ 0.107550] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009f9fffff
[ 0.107554] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.107556] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.107558] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.108092] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.108096] x2apic enabled
[ 0.108105] Switched APIC routing to cluster x2apic.
[ 0.108577] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127527] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e288dd460, max_idle_ns: 440795227916 ns
[ 0.127536] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.53 BogoMIPS (lpj=7183060)
[ 0.127541] pid_max: default: 32768 minimum: 301
[ 0.127584] LSM: Security Framework initializing
[ 0.127598] Yama: becoming mindful.
[ 0.127632] AppArmor: AppArmor initialized
[ 0.127699] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.127721] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.128123] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.128139] process: using mwait in idle threads
[ 0.128142] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.128144] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.128149] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.128152] Spectre V2 : Mitigation: Full generic retpoline
[ 0.128153] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.128154] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.128157] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.128158] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.128160] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.128164] SRBDS: Vulnerable: No microcode
[ 0.128165] MDS: Mitigation: Clear CPU buffers
[ 0.128484] Freeing SMP alternatives memory: 40K
[ 0.131649] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1422
[ 0.131661] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.131893] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.131905] ... version: 3
[ 0.131907] ... bit width: 48
[ 0.131908] ... generic registers: 4
[ 0.131909] ... value mask: 0000ffffffffffff
[ 0.131911] ... max period: 00007fffffffffff
[ 0.131912] ... fixed-purpose events: 3
[ 0.131913] ... event mask: 000000070000000f
[ 0.132109] rcu: Hierarchical SRCU implementation.
[ 0.133275] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.133411] smp: Bringing up secondary CPUs ...
[ 0.133574] x86: Booting SMP configuration:
[ 0.133576] .... node #0, CPUs: #1
[ 0.137578] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.137578] #2 #3
[ 0.143616] smp: Brought up 1 node, 4 CPUs
[ 0.143616] smpboot: Max logical packages: 2
[ 0.143616] smpboot: Total of 4 processors activated (14366.12 BogoMIPS)
[ 0.145112] devtmpfs: initialized
[ 0.145112] x86/mm: Memory block size: 128MB
[ 0.145112] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.145112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.145112] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.145112] pinctrl core: initialized pinctrl subsystem
[ 0.145112] PM: RTC time: 09:05:25, date: 2021-11-27
[ 0.145112] NET: Registered protocol family 16
[ 0.147678] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.147792] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.147902] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.147923] audit: initializing netlink subsys (disabled)
[ 0.147947] audit: type=2000 audit(1638003925.040:1): state=initialized audit_enabled=0 res=1
[ 0.147947] thermal_sys: Registered thermal governor 'fair_share'
[ 0.147947] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.147947] thermal_sys: Registered thermal governor 'step_wise'
[ 0.147947] thermal_sys: Registered thermal governor 'user_space'
[ 0.147947] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.147947] EISA bus registered
[ 0.147947] cpuidle: using governor ladder
[ 0.147947] cpuidle: using governor menu
[ 0.147947] Simple Boot Flag at 0x44 set to 0x1
[ 0.147947] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.147947] ACPI: bus type PCI registered
[ 0.147947] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.147963] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.147971] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.148000] PCI: Using configuration type 1 for base access
[ 0.148080] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.148366] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.149524] Kprobes globally optimized
[ 0.149531] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.151655] ipmi:dmi: Base address is zero, assuming no IPMI interface
[ 0.151672] ACPI: Added _OSI(Module Device)
[ 0.151674] ACPI: Added _OSI(Processor Device)
[ 0.151675] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.151677] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.151679] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.151681] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.151682] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.166406] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.169439] ACPI: Dynamic OEM Table Load:
[ 0.169454] ACPI: SSDT 0xFFFF8CA480BC8000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.170979] ACPI: Dynamic OEM Table Load:
[ 0.170990] ACPI: SSDT 0xFFFF8CA480DD1400 000303 (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.172157] ACPI: Dynamic OEM Table Load:
[ 0.172166] ACPI: SSDT 0xFFFF8CA480DD6000 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.174889] ACPI: EC: EC started
[ 0.174891] ACPI: EC: interrupt blocked
[ 0.175094] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.175098] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.175101] ACPI: Interpreter enabled
[ 0.175139] ACPI: (supports S0 S3 S4 S5)
[ 0.175141] ACPI: Using IOAPIC for interrupt routing
[ 0.175191] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.175789] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.186962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.186974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.187280] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.188288] PCI host bridge to bus 0000:00
[ 0.188293] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.188297] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.188299] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.188302] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.188305] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.188323] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.188457] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.188512] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.188671] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.188683] pci 0000:00:02.0: reg 0x10: [mem 0xc1000000-0xc13fffff 64bit]
[ 0.188692] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.188698] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.188911] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.188938] pci 0000:00:14.0: reg 0x10: [mem 0xc1600000-0xc160ffff 64bit]
[ 0.189023] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.189160] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.189186] pci 0000:00:16.0: reg 0x10: [mem 0xc1614000-0xc161400f 64bit]
[ 0.189280] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.189405] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.189424] pci 0000:00:1a.0: reg 0x10: [mem 0xc1619000-0xc16193ff]
[ 0.189523] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.189659] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.189681] pci 0000:00:1b.0: reg 0x10: [mem 0xc1610000-0xc1613fff 64bit]
[ 0.189781] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189920] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.190033] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.190192] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.190300] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.190470] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.190490] pci 0000:00:1d.0: reg 0x10: [mem 0xc1618000-0xc16183ff]
[ 0.190590] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.190728] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.190970] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.190988] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.190999] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.191009] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.191019] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.191029] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.191039] pci 0000:00:1f.2: reg 0x24: [mem 0xc1617000-0xc16177ff]
[ 0.191090] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.191213] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.191235] pci 0000:00:1f.3: reg 0x10: [mem 0xc1615000-0xc16150ff 64bit]
[ 0.191260] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.191482] pci 0000:01:00.0: [1002:6601] type 00 class 0x030000
[ 0.191495] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.191504] pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc003ffff 64bit]
[ 0.191510] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.191520] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.191527] pci 0000:01:00.0: enabling Extended Tags
[ 0.191571] pci 0000:01:00.0: supports D1 D2
[ 0.191573] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.191595] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.191819] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.191823] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.191827] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.191831] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.192017] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[ 0.192111] pci 0000:07:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.192237] pci 0000:07:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 0.192315] pci 0000:07:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 0.192772] pci 0000:07:00.0: supports D1 D2
[ 0.192774] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193212] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.193218] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.193228] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.193376] pci 0000:08:00.0: [8086:0887] type 00 class 0x028000
[ 0.193459] pci 0000:08:00.0: reg 0x10: [mem 0xc1500000-0xc1501fff 64bit]
[ 0.193754] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.193985] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.193993] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.276192] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.276321] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.276445] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276570] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.276691] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276814] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.276937] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.277059] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.277375] ACPI: EC: interrupt unblocked
[ 0.277377] ACPI: EC: event unblocked
[ 0.277383] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.277385] ACPI: EC: GPE=0x17
[ 0.277387] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.277391] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.277493] iommu: Default domain type: Translated
[ 0.277493] SCSI subsystem initialized
[ 0.277493] libata version 3.00 loaded.
[ 0.277493] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.277493] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.277493] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.277493] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.277493] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.277493] vgaarb: loaded
[ 0.277493] ACPI: bus type USB registered
[ 0.277493] usbcore: registered new interface driver usbfs
[ 0.277493] usbcore: registered new interface driver hub
[ 0.277493] usbcore: registered new device driver usb
[ 0.277493] pps_core: LinuxPPS API ver. 1 registered
[ 0.277493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.277493] PTP clock support registered
[ 0.277493] EDAC MC: Ver: 3.0.0
[ 0.277493] NetLabel: Initializing
[ 0.277493] NetLabel: domain hash size = 128
[ 0.277493] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.277493] NetLabel: unlabeled traffic allowed by default
[ 0.277493] PCI: Using ACPI for IRQ routing
[ 0.286188] PCI: pci_cache_line_size set to 64 bytes
[ 0.286298] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.286301] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.286303] e820: reserve RAM buffer [mem 0x90bb0000-0x93ffffff]
[ 0.286305] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
[ 0.286307] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.286309] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.287681] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.287697] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.289744] clocksource: Switched to clocksource tsc-early
[ 0.301675] VFS: Disk quotas dquot_6.6.0
[ 0.301699] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.301854] AppArmor: AppArmor Filesystem Enabled
[ 0.301891] pnp: PnP ACPI init
[ 0.302107] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.302112] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.302116] system 00:00: [io 0xffff] has been reserved
[ 0.302118] system 00:00: [io 0xffff] has been reserved
[ 0.302121] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.302123] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.302126] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.302128] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.302131] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.302141] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.302183] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.302267] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.302276] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.302329] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.302374] pnp 00:04: Plug and Play ACPI device, IDs DLL059a PNP0f13 (active)
[ 0.383822] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.383827] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.383829] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.383832] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.383835] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.383838] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.383840] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.383843] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.383846] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.383849] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.383852] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.383859] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384520] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.384524] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.384531] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.384564] pnp: PnP ACPI: found 7 devices
[ 0.390904] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.390992] NET: Registered protocol family 2
[ 0.391116] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.392973] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.393037] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.393252] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.393375] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.393460] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.393526] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.393563] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.393640] NET: Registered protocol family 1
[ 0.393650] NET: Registered protocol family 44
[ 0.393656] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.393674] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref]
[ 0.393679] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.393683] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.393687] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.393691] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.393696] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.393700] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.393709] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.393718] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.393724] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.393737] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393740] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.393743] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393745] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.393748] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.393751] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[ 0.393753] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.393756] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.393758] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.393761] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[ 0.393907] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.767698] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x640 took 363507 usecs
[ 0.787689] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x640 took 19494 usecs
[ 0.787746] PCI: CLS 64 bytes, default 64
[ 0.787814] Trying to unpack rootfs image as initramfs...
[ 1.004283] Freeing initrd memory: 56768K
[ 1.004371] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.004373] software IO TLB: mapped [mem 0x00000000963bf000-0x000000009a3bf000] (64MB)
[ 1.004675] check: Scanning for low memory corruption every 60 seconds
[ 1.005303] Initialise system trusted keyrings
[ 1.005318] Key type blacklist registered
[ 1.005369] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.007054] zbud: loaded
[ 1.007455] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.007665] fuse: init (API version 7.33)
[ 1.007867] integrity: Platform Keyring initialized
[ 1.024859] Key type asymmetric registered
[ 1.024861] Asymmetric key parser 'x509' registered
[ 1.024873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.024920] io scheduler mq-deadline registered
[ 1.025834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.025901] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 1.025904] vesafb: scrolling: redraw
[ 1.025906] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.025921] vesafb: framebuffer at 0xb0000000, mapped to 0x0000000077b463f5, using 4160k, total 4160k
[ 1.025974] fbcon: Deferring console take-over
[ 1.025975] fb0: VESA VGA frame buffer device
[ 1.025995] intel_idle: MWAIT substates: 0x21120
[ 1.025997] intel_idle: v0.5.1 model 0x3A
[ 1.026318] intel_idle: Local APIC timer is reliable in all C-states
[ 1.026512] ACPI: AC Adapter [ACAD] (on-line)
[ 1.026592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 1.026621] ACPI: Power Button [PWRB]
[ 1.026680] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.026726] ACPI: Lid Switch [LID0]
[ 1.026769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.026806] ACPI: Power Button [PWRF]
[ 1.027621] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.030160] Linux agpgart interface v0.103
[ 1.211683] loop: module loaded
[ 1.212464] libphy: Fixed MDIO Bus: probed
[ 1.212469] tun: Universal TUN/TAP device driver, 1.6
[ 1.212635] PPP generic driver version 2.4.2
[ 1.213002] VFIO - User Level meta-driver version: 0.3
[ 1.213200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.213212] ehci-pci: EHCI PCI platform driver
[ 1.213432] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.213442] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.213459] ehci-pci 0000:00:1a.0: debug port 2
[ 1.217410] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1619000
[ 1.231634] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.231734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.231740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.231743] usb usb1: Product: EHCI Host Controller
[ 1.231745] usb usb1: Manufacturer: Linux 5.11.0-40-generic ehci_hcd
[ 1.231748] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.232071] hub 1-0:1.0: USB hub found
[ 1.232096] hub 1-0:1.0: 2 ports detected
[ 1.232566] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.232578] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.232604] ehci-pci 0000:00:1d.0: debug port 2
[ 1.236549] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1618000
[ 1.251630] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.251752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.251759] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.251762] usb usb2: Product: EHCI Host Controller
[ 1.251765] usb usb2: Manufacturer: Linux 5.11.0-40-generic ehci_hcd
[ 1.251767] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.252105] hub 2-0:1.0: USB hub found
[ 1.252122] hub 2-0:1.0: 2 ports detected
[ 1.252367] ehci-platform: EHCI generic platform driver
[ 1.252395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.252405] ohci-pci: OHCI PCI platform driver
[ 1.252423] ohci-platform: OHCI generic platform driver
[ 1.252438] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.252528] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.269632] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.269640] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.270027] mousedev: PS/2 mouse device common for all mice
[ 1.270642] rtc_cmos 00:01: RTC can wake from S4
[ 1.270942] rtc_cmos 00:01: registered as rtc0
[ 1.271008] rtc_cmos 00:01: setting system clock to 2021-11-27T09:05:26 UTC (1638003926)
[ 1.271035] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.271047] i2c /dev entries driver
[ 1.271108] device-mapper: uevent: version 1.0.3
[ 1.271198] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 1.271227] platform eisa.0: Probing EISA bus 0
[ 1.271230] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.271232] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.271235] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.271237] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.271238] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.271240] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.271242] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.271244] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.271246] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.271248] platform eisa.0: EISA: Detected 0 cards
[ 1.271256] intel_pstate: Intel P-state driver initializing
[ 1.271779] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.271906] drop_monitor: Initializing network drop monitor service
[ 1.272068] NET: Registered protocol family 10
[ 1.280917] Segment Routing with IPv6
[ 1.280998] NET: Registered protocol family 17
[ 1.281145] Key type dns_resolver registered
[ 1.281806] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.281951] microcode: Microcode Update Driver: v2.2.
[ 1.281956] IPI shorthand broadcast: enabled
[ 1.281982] sched_clock: Marking stable (1281590735, 356474)->(1298542101, -16594892)
[ 1.282176] registered taskstats version 1
[ 1.282212] Loading compiled-in X.509 certificates
[ 1.283154] Loaded X.509 cert 'Build time autogenerated kernel key: 6c5dd34c8537f715fe85d833b66f9d2aa158f3cc'
[ 1.283944] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.284702] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.284704] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.284723] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.284951] zswap: loaded using pool lzo/zbud
[ 1.285126] Key type ._fscrypt registered
[ 1.285128] Key type .fscrypt registered
[ 1.285129] Key type fscrypt-provisioning registered
[ 1.288407] Key type encrypted registered
[ 1.288415] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.288422] ima: No TPM chip found, activating TPM-bypass!
[ 1.288428] ima: Allocated hash algorithm: sha1
[ 1.288438] ima: No architecture policies found
[ 1.288452] evm: Initialising EVM extended attributes:
[ 1.288453] evm: security.selinux
[ 1.288455] evm: security.SMACK64
[ 1.288455] evm: security.SMACK64EXEC
[ 1.288456] evm: security.SMACK64TRANSMUTE
[ 1.288457] evm: security.SMACK64MMAP
[ 1.288457] evm: security.apparmor
[ 1.288458] evm: security.ima
[ 1.288459] evm: security.capability
[ 1.288460] evm: HMAC attrs: 0x1
[ 1.288859] PM: Magic number: 13:526:71
[ 1.289030] RAS: Correctable Errors collector initialized.
[ 1.293122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.311814] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 1.313046] Freeing unused decrypted memory: 2036K
[ 1.313374] Freeing unused kernel image (initmem) memory: 2688K
[ 1.331668] Write protecting the kernel read-only data: 28672k
[ 1.332261] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.332648] Freeing unused kernel image (rodata/data gap) memory: 1948K
[ 1.390464] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.390467] x86/mm: Checking user space page tables
[ 1.445681] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.445686] Run /init as init process
[ 1.445688] with arguments:
[ 1.445689] /init
[ 1.445690] splash
[ 1.445691] with environment:
[ 1.445691] HOME=/
[ 1.445692] TERM=linux
[ 1.445693] BOOT_IMAGE=/boot/vmlinuz-5.11.0-40-generic
[ 1.491581] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.491608] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.576354] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20201113/utaddress-204)
[ 1.576366] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.576372] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20201113/utaddress-204)
[ 1.576379] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20201113/utaddress-204)
[ 1.576386] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.576388] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20201113/utaddress-204)
[ 1.576395] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20201113/utaddress-204)
[ 1.576407] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.576428] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20201113/utaddress-204)
[ 1.576440] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20201113/utaddress-204)
[ 1.576449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.576451] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.576884] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 1.578355] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.578365] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.579439] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 1.579662] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.579669] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.579674] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.579727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.579731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.579734] usb usb3: Product: xHCI Host Controller
[ 1.579737] usb usb3: Manufacturer: Linux 5.11.0-40-generic xhci-hcd
[ 1.579739] usb usb3: SerialNumber: 0000:00:14.0
[ 1.579897] hub 3-0:1.0: USB hub found
[ 1.579910] hub 3-0:1.0: 4 ports detected
[ 1.580597] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.582864] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.582870] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.582874] usb usb4: Product: xHCI Host Controller
[ 1.582876] usb usb4: Manufacturer: Linux 5.11.0-40-generic xhci-hcd
[ 1.582879] usb usb4: SerialNumber: 0000:00:14.0
[ 1.583036] hub 4-0:1.0: USB hub found
[ 1.583050] hub 4-0:1.0: 4 ports detected
[ 1.583461] ahci 0000:00:1f.2: version 3.0
[ 1.585162] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.595642] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.595652] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.596171] libphy: r8169: probed
[ 1.609740] r8169 0000:07:00.0 eth0: RTL8105e, 74:86:7a:07:27:00, XID 40c, IRQ 31
[ 1.618790] scsi host0: ahci
[ 1.627752] scsi host1: ahci
[ 1.629621] scsi host2: ahci
[ 1.629811] scsi host3: ahci
[ 1.629990] scsi host4: ahci
[ 1.631058] scsi host5: ahci
[ 1.631147] ata1: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617100 irq 30
[ 1.631152] ata2: DUMMY
[ 1.631156] ata3: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617200 irq 30
[ 1.631159] ata4: DUMMY
[ 1.631160] ata5: DUMMY
[ 1.631162] ata6: DUMMY
[ 1.631416] r8169 0000:07:00.0 enp7s0: renamed from eth0
[ 1.652276] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.652283] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.652729] hub 1-1:1.0: USB hub found
[ 1.652900] hub 1-1:1.0: 6 ports detected
[ 1.654163] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.654170] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.654418] hub 2-1:1.0: USB hub found
[ 1.654488] hub 2-1:1.0: 6 ports detected
[ 1.665438] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.665861] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.675651] tsc: Refined TSC clocksource calibration: 1795.924 MHz
[ 1.675666] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31f0b89e, max_idle_ns: 440795230784 ns
[ 1.675691] clocksource: Switched to clocksource tsc
[ 1.839619] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 1.939630] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.946842] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.946876] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.948401] ata3.00: ATAPI: MATSHITA DVD+/-RW UJ8C2, 1.01, max UDMA/133
[ 1.949958] ata3.00: configured for UDMA/133
[ 1.953401] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR20004, max UDMA/133
[ 1.953412] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.959786] ata1.00: configured for UDMA/133
[ 1.960339] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0004 PQ: 0 ANSI: 5
[ 1.961139] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.961495] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.961587] sd 0:0:0:0: [sda] Write Protect is off
[ 1.961604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.961725] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.962838] scsi 2:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8C2 1.01 PQ: 0 ANSI: 5
[ 1.996025] usb 3-1: New USB device found, idVendor=0518, idProduct=0001, bcdDevice= 1.00
[ 1.996035] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.996040] usb 3-1: Product: USB-compliant keyboard
[ 1.996043] usb 3-1: Manufacturer: Plus More Enterprise LTD.
[ 2.007315] hid: raw HID events driver (C) Jiri Kosina
[ 2.016753] usbcore: registered new interface driver usbhid
[ 2.016759] usbhid: USB HID core driver
[ 2.020249] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0518:0001.0001/input/input6
[ 2.022820] sda: sda1 sda2 < sda5 >
[ 2.025683] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.025690] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.047802] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.060434] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da, bcdDevice=78.69
[ 2.060441] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.080117] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:14.0-1/input0
[ 2.080359] input: Plus More Enterprise LTD. USB-compliant keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0518:0001.0002/input/input7
[ 2.080451] input: Plus More Enterprise LTD. USB-compliant keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0518:0001.0002/input/input8
[ 2.115621] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.115814] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.139598] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.139893] input: Plus More Enterprise LTD. USB-compliant keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0518:0001.0002/input/input9
[ 2.140047] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:14.0-1/input1
[ 2.249076] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.249094] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.249100] usb 1-1.3: Product: USB2.0-CRW
[ 2.249104] usb 1-1.3: Manufacturer: Generic
[ 2.249108] usb 1-1.3: SerialNumber: 20100201396000000
[ 2.256873] usbcore: registered new interface driver rtsx_usb
[ 2.327684] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.376620] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754]
[ 2.443076] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..]
[ 2.443102] psmouse serio1: synaptics: Your touchpad (PNP: DLL059a PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.501050] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=649a, bcdDevice=28.28
[ 2.501068] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.501074] usb 1-1.4: Product: Laptop_Integrated_Webcam_HD
[ 2.501079] usb 1-1.4: Manufacturer: CNFB194I49502***,062
[ 2.553900] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2382, fw id: 1238635
[ 2.627681] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.717393] fbcon: Taking over console
[ 2.717500] Console: switching to colour frame buffer device 170x48
[ 2.799035] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 4.998682] systemd[1]: Inserted module 'autofs4'
[ 5.362308] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.379859] systemd[1]: Detected architecture x86-64.
[ 5.411523] systemd[1]: Set hostname to <Nouille>.
[ 9.977901] systemd[1]: Created slice system-modprobe.slice.
[ 9.978745] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.979424] systemd[1]: Created slice User and Session Slice.
[ 9.979657] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.980256] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.980392] systemd[1]: Reached target User and Group Name Lookups.
[ 9.980444] systemd[1]: Reached target Remote File Systems.
[ 9.980474] systemd[1]: Reached target Slices.
[ 9.980873] systemd[1]: Listening on Syslog Socket.
[ 9.981177] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.981348] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.981980] systemd[1]: Listening on Journal Audit Socket.
[ 9.982282] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.982635] systemd[1]: Listening on Journal Socket.
[ 9.982986] systemd[1]: Listening on udev Control Socket.
[ 9.983225] systemd[1]: Listening on udev Kernel Socket.
[ 9.986276] systemd[1]: Mounting Huge Pages File System...
[ 9.988764] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.991184] systemd[1]: Mounting Kernel Debug File System...
[ 9.992893] systemd[1]: Mounting Kernel Trace File System...
[ 9.996067] systemd[1]: Starting Journal Service...
[ 9.997413] systemd[1]: Starting Set the console keyboard layout...
[ 9.999200] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 10.000706] systemd[1]: Starting Load Kernel Module drm...
[ 10.091087] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 10.091147] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 10.284186] systemd[1]: Starting Load Kernel Modules...
[ 10.285978] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 10.287419] systemd[1]: Starting udev Coldplug all Devices...
[ 10.288921] systemd[1]: Starting Uncomplicated firewall...
[ 10.293509] systemd[1]: Mounted Huge Pages File System.
[ 10.293908] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.294264] systemd[1]: Mounted Kernel Debug File System.
[ 10.294604] systemd[1]: Mounted Kernel Trace File System.
[ 10.296118] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 10.297103] systemd[1]: modprobe@drm.service: Succeeded.
[ 10.298088] systemd[1]: Finished Load Kernel Module drm.
[ 10.432926] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 10.435788] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 10.438647] systemd[1]: Activating swap /swapfile...
[ 10.632504] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 10.632604] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 10.633749] systemd[1]: Starting Load/Save Random Seed...
[ 10.634829] systemd[1]: Starting Create System Users...
[ 10.635146] systemd[1]: Started Journal Service.
[ 10.810131] systemd-journald[279]: Received client request to flush runtime journal.
[ 10.853963] lp: driver loaded but no devices found
[ 10.915613] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 10.964412] ppdev: user-space parallel port driver
[ 12.917481] loop0: detected capacity change from 0 to 170736
[ 12.940103] loop1: detected capacity change from 0 to 8
[ 12.964490] loop2: detected capacity change from 0 to 170744
[ 13.004873] loop3: detected capacity change from 0 to 518552
[ 13.173028] loop4: detected capacity change from 0 to 518528
[ 13.224603] loop5: detected capacity change from 0 to 18480
[ 13.248352] loop6: detected capacity change from 0 to 18488
[ 13.309284] loop7: detected capacity change from 0 to 445256
[ 13.383990] loop8: detected capacity change from 0 to 455136
[ 13.452012] loop9: detected capacity change from 0 to 203424
[ 13.524172] loop10: detected capacity change from 0 to 203648
[ 13.620010] loop11: detected capacity change from 0 to 113656
[ 13.708688] loop12: detected capacity change from 0 to 113640
[ 13.788140] loop13: detected capacity change from 0 to 567376
[ 13.855967] loop14: detected capacity change from 0 to 169760
[ 13.915980] loop15: detected capacity change from 0 to 158016
[ 13.980318] loop16: detected capacity change from 0 to 126632
[ 14.063719] loop17: detected capacity change from 0 to 566592
[ 14.115864] loop18: detected capacity change from 0 to 126632
[ 14.243951] loop19: detected capacity change from 0 to 448512
[ 14.315994] loop20: detected capacity change from 0 to 337424
[ 14.396091] loop21: detected capacity change from 0 to 133552
[ 14.480298] loop22: detected capacity change from 0 to 448512
[ 14.524241] loop23: detected capacity change from 0 to 133320
[ 14.620035] loop24: detected capacity change from 0 to 109992
[ 14.679963] loop25: detected capacity change from 0 to 109984
[ 14.723771] loop26: detected capacity change from 0 to 507712
[ 14.780152] loop27: detected capacity change from 0 to 111080
[ 14.856392] loop28: detected capacity change from 0 to 86368
[ 14.908441] loop29: detected capacity change from 0 to 483248
[ 14.991852] loop30: detected capacity change from 0 to 376504
[ 15.071973] loop31: detected capacity change from 0 to 360424
[ 15.104140] loop32: detected capacity change from 0 to 641392
[ 15.171971] loop33: detected capacity change from 0 to 66440
[ 15.203734] loop34: detected capacity change from 0 to 130016
[ 15.247787] loop35: detected capacity change from 0 to 319832
[ 15.344109] loop36: detected capacity change from 0 to 168096
[ 15.404149] loop37: detected capacity change from 0 to 167048
[ 15.452097] loop38: detected capacity change from 0 to 175568
[ 15.515938] loop39: detected capacity change from 0 to 605624
[ 15.587917] loop40: detected capacity change from 0 to 104360
[ 15.643979] loop41: detected capacity change from 0 to 378520
[ 15.679814] loop42: detected capacity change from 0 to 327568
[ 15.787874] loop43: detected capacity change from 0 to 629664
[ 15.847907] loop44: detected capacity change from 0 to 208
[ 15.923853] loop45: detected capacity change from 0 to 175544
[ 19.296040] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 19.308248] at24 0-0050: supply vcc not found, using dummy regulator
[ 19.308880] at24 0-0050: 256 byte spd EEPROM, read-only
[ 19.404411] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[ 19.763754] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 19.764218] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 20.994523] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 20.994528] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 20.994530] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 20.994532] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 21.265892] cryptd: max_cpu_qlen set to 1000
[ 21.464028] checking generic (b0000000 410000) vs hw (c1000000 400000)
[ 21.464034] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 21.464037] fb0: switching to inteldrmfb from VESA VGA
[ 21.464149] Console: switching to colour dummy device 80x25
[ 21.464196] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 21.467331] AVX version of gcm_enc/dec engaged.
[ 21.467336] AES CTR mode by8 optimization enabled
[ 21.469176] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.486742] Intel(R) Wireless WiFi driver for Linux
[ 21.486942] iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 21.507933] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 21.508168] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 21.508881] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 21.508891] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20201113/psargs-330)
[ 21.508903] No Local Variables are initialized for Method [_BCL]
[ 21.508905] No Arguments are initialized for method [_BCL]
[ 21.508907] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.DD02._BCL due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 21.509054] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input11
[ 21.509767] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.509892] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input12
[ 21.553632] Bluetooth: Core ver 2.22
[ 21.553665] NET: Registered protocol family 31
[ 21.553667] Bluetooth: HCI device and connection manager initialized
[ 21.553672] Bluetooth: HCI socket layer initialized
[ 21.553674] Bluetooth: L2CAP socket layer initialized
[ 21.553678] Bluetooth: SCO socket layer initialized
[ 21.740798] fbcon: i915drmfb (fb0) is primary device
[ 21.740878] Console: switching to colour frame buffer device 170x48
[ 21.740911] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 23.123596] iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 2030-6.ucode op_mode iwldvm
[ 23.351337] mc: Linux media interface: v0.10
[ 23.622034] usbcore: registered new interface driver btusb
[ 23.623885] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 23.692082] [drm] radeon kernel modesetting enabled.
[ 23.692113] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 23.692339] ATPX version 1, functions 0x00000033
[ 23.692599] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 23.692930] [drm] initializing kernel modesetting (OLAND 0x1002:0x6601 0x1028:0x05B8 0x00).
[ 23.692960] vga_switcheroo: enabled
[ 23.723543] ATOM BIOS: Dell/Compal
[ 23.723645] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 23.723650] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 23.723661] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 23.723662] [drm] RAM width 128bits DDR
[ 23.723739] [TTM] Zone kernel: Available graphics memory: 4014798 KiB
[ 23.723741] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 23.723761] [drm] radeon: 2048M of VRAM memory ready
[ 23.723763] [drm] radeon: 2048M of GTT memory ready.
[ 23.723771] [drm] Loading oland Microcode
[ 23.732168] videodev: Linux video capture interface: v2.00
[ 25.861365] [drm] Internal thermal controller without fan control
[ 25.881062] [drm] radeon: dpm initialized
[ 27.089403] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:649a)
[ 27.124032] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[ 27.124217] usbcore: registered new interface driver uvcvideo
[ 27.124223] USB Video Class driver (1.1.1)
[ 28.122902] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 28.122957] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 28.130398] [drm] PCIE gen 2 link speeds already enabled
[ 28.158503] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 28.158708] radeon 0000:01:00.0: WB enabled
[ 28.158716] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 28.158723] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 28.158727] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 28.158731] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 28.158735] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 28.159147] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 28.259478] radeon 0000:01:00.0: failed VCE resume (-110).
[ 28.259583] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 28.259650] radeon 0000:01:00.0: radeon: using MSI.
[ 28.259681] [drm] radeon: irq initialized.
[ 28.404970] [drm] ring test on 0 succeeded in 1 usecs
[ 28.404977] [drm] ring test on 1 succeeded in 1 usecs
[ 28.404982] [drm] ring test on 2 succeeded in 1 usecs
[ 28.404989] [drm] ring test on 3 succeeded in 3 usecs
[ 28.404996] [drm] ring test on 4 succeeded in 3 usecs
[ 28.580824] [drm] ring test on 5 succeeded in 2 usecs
[ 28.580832] [drm] UVD initialized successfully.
[ 28.580977] [drm] ib test on ring 0 succeeded in 0 usecs
[ 28.581011] [drm] ib test on ring 1 succeeded in 0 usecs
[ 28.581045] [drm] ib test on ring 2 succeeded in 0 usecs
[ 28.581076] [drm] ib test on ring 3 succeeded in 0 usecs
[ 28.581102] [drm] ib test on ring 4 succeeded in 0 usecs
[ 29.096364] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 29.096380] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 29.096387] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 29.096393] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 29.133912] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 29.259618] [drm] ib test on ring 5 succeeded
[ 29.261448] [drm] Radeon Display Connectors
[ 29.273904] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 32.138894] intel_rapl_common: Found RAPL domain package
[ 32.138908] intel_rapl_common: Found RAPL domain core
[ 32.138913] intel_rapl_common: Found RAPL domain uncore
[ 32.138934] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 32.469844] iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
[ 32.833743] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 32.833753] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 34.170427] [drm] amdgpu kernel modesetting enabled.
[ 34.170458] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 34.170694] ATPX version 1, functions 0x00000033
[ 34.170998] CRAT table not found
[ 34.171003] Virtual CRAT table created for CPU
[ 34.171023] amdgpu: Topology: Add CPU node
[ 35.069334] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 35.146717] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 35.146741] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 35.146746] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 35.146750] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 35.146753] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 35.146756] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 35.146760] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 35.198200] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 35.198293] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 35.198370] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 37.661424] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 37.687781] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 37.687908] radeon 0000:01:00.0: WB enabled
[ 37.687914] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 37.687919] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 37.687922] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 37.687925] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 37.687928] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 37.688340] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 37.788635] radeon 0000:01:00.0: failed VCE resume (-110).
[ 37.934756] [drm] ring test on 0 succeeded in 1 usecs
[ 37.934765] [drm] ring test on 1 succeeded in 1 usecs
[ 37.934769] [drm] ring test on 2 succeeded in 1 usecs
[ 37.934777] [drm] ring test on 3 succeeded in 3 usecs
[ 37.934783] [drm] ring test on 4 succeeded in 3 usecs
[ 38.110476] [drm] ring test on 5 succeeded in 2 usecs
[ 38.110485] [drm] UVD initialized successfully.
[ 38.110525] [drm] ib test on ring 0 succeeded in 0 usecs
[ 38.110558] [drm] ib test on ring 1 succeeded in 0 usecs
[ 38.110588] [drm] ib test on ring 2 succeeded in 0 usecs
[ 38.110618] [drm] ib test on ring 3 succeeded in 0 usecs
[ 38.110648] [drm] ib test on ring 4 succeeded in 0 usecs
[ 38.763652] [drm] ib test on ring 5 succeeded
[ 41.822206] audit: type=1400 audit(1638003967.044:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=880 comm="apparmor_parser"
[ 41.858375] audit: type=1400 audit(1638003967.080:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=881 comm="apparmor_parser"
[ 41.858436] audit: type=1400 audit(1638003967.080:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=881 comm="apparmor_parser"
[ 41.858460] audit: type=1400 audit(1638003967.080:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=881 comm="apparmor_parser"
[ 41.858906] audit: type=1400 audit(1638003967.080:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=882 comm="apparmor_parser"
[ 41.959826] audit: type=1400 audit(1638003967.184:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=885 comm="apparmor_parser"
[ 42.018610] audit: type=1400 audit(1638003967.240:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=886 comm="apparmor_parser"
[ 42.025391] audit: type=1400 audit(1638003967.248:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=879 comm="apparmor_parser"
[ 42.051405] audit: type=1400 audit(1638003967.272:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=884 comm="apparmor_parser"
[ 42.051422] audit: type=1400 audit(1638003967.272:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=884 comm="apparmor_parser"
[ 51.939581] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 51.966154] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 51.966345] radeon 0000:01:00.0: WB enabled
[ 51.966356] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 51.966364] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 51.966369] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 51.966374] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 51.966379] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 51.966802] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 52.067097] radeon 0000:01:00.0: failed VCE resume (-110).
[ 52.212380] [drm] ring test on 0 succeeded in 1 usecs
[ 52.212387] [drm] ring test on 1 succeeded in 1 usecs
[ 52.212390] [drm] ring test on 2 succeeded in 1 usecs
[ 52.212397] [drm] ring test on 3 succeeded in 3 usecs
[ 52.212403] [drm] ring test on 4 succeeded in 3 usecs
[ 52.388065] [drm] ring test on 5 succeeded in 2 usecs
[ 52.388073] [drm] UVD initialized successfully.
[ 52.388108] [drm] ib test on ring 0 succeeded in 0 usecs
[ 52.388137] [drm] ib test on ring 1 succeeded in 0 usecs
[ 52.388164] [drm] ib test on ring 2 succeeded in 0 usecs
[ 52.388191] [drm] ib test on ring 3 succeeded in 0 usecs
[ 52.388217] [drm] ib test on ring 4 succeeded in 0 usecs
[ 53.071663] [drm] ib test on ring 5 succeeded
[ 62.405204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 62.405208] Bluetooth: BNEP filters: protocol multicast
[ 62.405212] Bluetooth: BNEP socket layer initialized
[ 62.613352] NET: Registered protocol family 38
[ 62.899787] loop46: detected capacity change from 0 to 8
[ 63.705484] kauditd_printk_skb: 88 callbacks suppressed
[ 63.705491] audit: type=1400 audit(1638003988.928:100): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1140 comm="cups-browsed" capability=23 capname="sys_nice"
[ 66.420494] RTL8208 Fast Ethernet r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC)
[ 66.706941] r8169 0000:07:00.0 enp7s0: Link is Down
[ 66.724955] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[ 67.001157] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[ 70.902281] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[ 70.904599] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[ 70.908956] wlp8s0: authenticated
[ 70.911548] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[ 70.928903] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=2)
[ 70.931744] wlp8s0: associated
[ 71.277755] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[ 82.560166] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 82.570848] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 82.570954] radeon 0000:01:00.0: WB enabled
[ 82.570957] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 82.570959] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 82.570961] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 82.570962] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 82.570964] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 82.571367] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 82.671650] radeon 0000:01:00.0: failed VCE resume (-110).
[ 82.817007] [drm] ring test on 0 succeeded in 2 usecs
[ 82.817013] [drm] ring test on 1 succeeded in 1 usecs
[ 82.817017] [drm] ring test on 2 succeeded in 1 usecs
[ 82.817023] [drm] ring test on 3 succeeded in 3 usecs
[ 82.817028] [drm] ring test on 4 succeeded in 3 usecs
[ 82.992695] [drm] ring test on 5 succeeded in 2 usecs
[ 82.992705] [drm] UVD initialized successfully.
[ 82.992760] [drm] ib test on ring 0 succeeded in 0 usecs
[ 82.992793] [drm] ib test on ring 1 succeeded in 0 usecs
[ 82.992824] [drm] ib test on ring 2 succeeded in 0 usecs
[ 82.992856] [drm] ib test on ring 3 succeeded in 0 usecs
[ 82.992884] [drm] ib test on ring 4 succeeded in 0 usecs
[ 83.659687] [drm] ib test on ring 5 succeeded
[ 99.657496] Bluetooth: RFCOMM TTY layer initialized
[ 99.657507] Bluetooth: RFCOMM socket layer initialized
[ 99.657516] Bluetooth: RFCOMM ver 1.11
[ 100.276076] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 100.286706] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 100.286812] radeon 0000:01:00.0: WB enabled
[ 100.286815] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 100.286818] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 100.286820] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 100.286821] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 100.286822] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 100.287226] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 100.387533] radeon 0000:01:00.0: failed VCE resume (-110).
[ 100.532821] [drm] ring test on 0 succeeded in 1 usecs
[ 100.532827] [drm] ring test on 1 succeeded in 1 usecs
[ 100.532831] [drm] ring test on 2 succeeded in 1 usecs
[ 100.532837] [drm] ring test on 3 succeeded in 3 usecs
[ 100.532842] [drm] ring test on 4 succeeded in 3 usecs
[ 100.708513] [drm] ring test on 5 succeeded in 2 usecs
[ 100.708522] [drm] UVD initialized successfully.
[ 100.708564] [drm] ib test on ring 0 succeeded in 0 usecs
[ 100.708622] [drm] ib test on ring 1 succeeded in 0 usecs
[ 100.708645] [drm] ib test on ring 2 succeeded in 0 usecs
[ 100.708673] [drm] ib test on ring 3 succeeded in 0 usecs
[ 100.708700] [drm] ib test on ring 4 succeeded in 0 usecs
[ 101.387682] [drm] ib test on ring 5 succeeded
[ 123.126751] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 123.138038] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 123.138152] radeon 0000:01:00.0: WB enabled
[ 123.138156] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 123.138158] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 123.138160] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 123.138162] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 123.138163] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 123.138566] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 123.238872] radeon 0000:01:00.0: failed VCE resume (-110).
[ 123.384087] [drm] ring test on 0 succeeded in 1 usecs
[ 123.384096] [drm] ring test on 1 succeeded in 1 usecs
[ 123.384100] [drm] ring test on 2 succeeded in 1 usecs
[ 123.384106] [drm] ring test on 3 succeeded in 3 usecs
[ 123.384119] [drm] ring test on 4 succeeded in 1 usecs
[ 123.559797] [drm] ring test on 5 succeeded in 2 usecs
[ 123.559808] [drm] UVD initialized successfully.
[ 123.559844] [drm] ib test on ring 0 succeeded in 0 usecs
[ 123.559874] [drm] ib test on ring 1 succeeded in 0 usecs
[ 123.559902] [drm] ib test on ring 2 succeeded in 0 usecs
[ 123.559930] [drm] ib test on ring 3 succeeded in 0 usecs
[ 123.559956] [drm] ib test on ring 4 succeeded in 0 usecs
[ 124.234689] [drm] ib test on ring 5 succeeded
[ 135.628386] audit: type=1400 audit(1638004060.482:101): apparmor="DENIED" operation="open" profile="snap.wekan.mongodb" name="/sys/block/" pid=3196 comm="mongod" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 142.829745] loop46: detected capacity change from 0 to 175552
[ 154.483532] audit: type=1400 audit(1638004079.358:102): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/14066/usr/lib/snapd/snap-confine" pid=3704 comm="apparmor_parser"
[ 154.483551] audit: type=1400 audit(1638004079.358:103): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/14066/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3704 comm="apparmor_parser"
[ 155.057629] audit: type=1400 audit(1638004079.935:104): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.standard-notes" pid=3706 comm="apparmor_parser"
[ 155.290653] audit: type=1400 audit(1638004080.167:105): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.standard-notes.standard-notes" pid=3707 comm="apparmor_parser"
[ 156.785553] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 156.797000] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 156.797110] radeon 0000:01:00.0: WB enabled
[ 156.797114] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 156.797116] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 156.797117] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 156.797119] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 156.797120] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 156.797521] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 156.897825] radeon 0000:01:00.0: failed VCE resume (-110).
[ 157.043883] [drm] ring test on 0 succeeded in 2 usecs
[ 157.043891] [drm] ring test on 1 succeeded in 1 usecs
[ 157.043895] [drm] ring test on 2 succeeded in 1 usecs
[ 157.043901] [drm] ring test on 3 succeeded in 3 usecs
[ 157.043907] [drm] ring test on 4 succeeded in 3 usecs
[ 157.219587] [drm] ring test on 5 succeeded in 1 usecs
[ 157.219598] [drm] UVD initialized successfully.
[ 157.219668] [drm] ib test on ring 0 succeeded in 0 usecs
[ 157.219770] [drm] ib test on ring 1 succeeded in 0 usecs
[ 157.219801] [drm] ib test on ring 2 succeeded in 0 usecs
[ 157.219830] [drm] ib test on ring 3 succeeded in 0 usecs
[ 157.219858] [drm] ib test on ring 4 succeeded in 0 usecs
[ 157.895388] [drm] ib test on ring 5 succeeded
[ 179.408484] rfkill: input handler disabled
[ 183.843591] audit: type=1400 audit(1638004108.731:106): apparmor="DENIED" operation="capable" profile="/snap/snapd/14066/usr/lib/snapd/snap-confine" pid=4109 comm="snap-confine" capability=4 capname="fsetid"
[ 198.892668] audit: type=1326 audit(1638004123.782:107): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=4109 comm="snap-store" exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f0f23dce89d code=0x50000
[ 201.657683] audit: type=1107 audit(1638004126.550:108): pid=984 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.12" pid=4109 label="snap.snap-store.ubuntu-software" peer_pid=1007 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 201.658357] audit: type=1107 audit(1638004126.550:109): pid=984 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.12" pid=4109 label="snap.snap-store.ubuntu-software" peer_pid=1007 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 205.329981] audit: type=1400 audit(1638004130.222:110): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4109 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 205.365626] audit: type=1400 audit(1638004130.254:111): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4109 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 205.982474] audit: type=1326 audit(1638004130.874:112): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=4109 comm="snap-store" exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f0f23dc54fb code=0x50000
[ 206.127619] audit: type=1107 audit(1638004131.018:113): pid=984 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.12" pid=4109 label="snap.snap-store.ubuntu-software" peer_pid=1007 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 206.128686] audit: type=1107 audit(1638004131.018:114): pid=984 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.12" pid=4109 label="snap.snap-store.ubuntu-software" peer_pid=1007 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 207.060100] audit: type=1400 audit(1638004131.950:115): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=4109 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 223.846460] audit: type=1400 audit(1638004148.738:116): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4109 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 223.885087] audit: type=1400 audit(1638004148.774:117): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4109 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 224.540865] audit: type=1326 audit(1638004149.430:118): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=4109 comm="pool-org.gnome." exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f0f23dc54fb code=0x50000
[ 325.636956] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[ 325.788628] usb 3-2: New USB device found, idVendor=4e53, idProduct=5407, bcdDevice= 1.00
[ 325.788643] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 325.788649] usb 3-2: Product: USB OPTICAL MOUSE
[ 325.793138] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:4E53:5407.0003/input/input17
[ 325.793465] hid-generic 0003:4E53:5407.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-2/input0
[ 325.796912] input: USB OPTICAL MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:4E53:5407.0004/input/input18
[ 325.857086] input: USB OPTICAL MOUSE Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:4E53:5407.0004/input/input19
[ 325.857209] input: USB OPTICAL MOUSE System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:4E53:5407.0004/input/input20
[ 325.857398] hid-generic 0003:4E53:5407.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:14.0-2/input1
[ 1391.022363] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[ 1391.024703] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[ 1391.057156] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 2/3)
[ 1391.104137] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 3/3)
[ 1391.207239] wlp8s0: authentication with c6:8e:de:f7:06:ab timed out
[ 3135.781214] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[ 3135.784259] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[ 3135.788893] wlp8s0: authenticated
[ 3135.792870] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[ 3135.804051] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=2)
[ 3135.816267] wlp8s0: associated
[ 3135.826395] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[ 4558.535540] usb 3-2: USB disconnect, device number 3
[11040.628168] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[11040.629845] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[11040.737557] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 2/3)
[11040.745580] wlp8s0: authenticated
[11040.749538] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[11040.759442] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=3)
[11040.766787] wlp8s0: associated
[11234.567289] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[11234.569048] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[11234.673758] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 2/3)
[11234.679506] wlp8s0: authenticated
[11234.681704] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[11234.688478] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=4)
[11234.697429] wlp8s0: associated
[11800.370967] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[11800.372816] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[11800.394390] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 2/3)
[11800.442007] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 3/3)
[11800.468874] wlp8s0: authentication with c6:8e:de:f7:06:ab timed out
[16002.591652] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[16002.594751] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[16002.597837] wlp8s0: authenticated
[16002.601227] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[16002.609385] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=2)
[16002.613106] wlp8s0: associated
[16002.628272] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[17792.827626] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[17792.830937] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[17793.067521] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 2/3)
[17793.177051] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 3/3)
[17793.327545] wlp8s0: authentication with c6:8e:de:f7:06:ab timed out
[17794.371998] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[17794.373476] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[17794.383939] wlp8s0: authenticated
[17794.384119] wlp8s0: waiting for beacon from c6:8e:de:f7:06:ab
[17794.452992] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[17794.488778] wlp8s0: associate with c6:8e:de:f7:06:ab (try 2/3)
[17794.526966] wlp8s0: associate with c6:8e:de:f7:06:ab (try 3/3)
[17794.567831] wlp8s0: association with c6:8e:de:f7:06:ab timed out
[17801.520085] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[17801.521838] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[17801.527678] wlp8s0: authenticated
[17801.528503] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[17801.546897] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=4)
[17801.550451] wlp8s0: associated
[17819.683858] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[17819.685198] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[17819.707946] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 2/3)
[17819.728746] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 3/3)
[17819.757841] wlp8s0: authentication with c6:8e:de:f7:06:ab timed out
[17822.652649] audit: type=1400 audit(1638021747.808:119): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4109 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[17822.715410] audit: type=1400 audit(1638021747.872:120): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4109 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[17823.660059] audit: type=1326 audit(1638021748.816:121): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=4109 comm="pool-org.gnome." exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f0f23dc54fb code=0x50000
[23185.945538] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[34886.771358] perf: interrupt took too long (3182 > 3126), lowering kernel.perf_event_max_sample_rate to 62750
[43314.968033] wlp8s0: authenticate with c6:8e:de:f7:06:ab
[43314.971208] wlp8s0: send auth to c6:8e:de:f7:06:ab (try 1/3)
[43314.974928] wlp8s0: authenticated
[43314.975698] wlp8s0: associate with c6:8e:de:f7:06:ab (try 1/3)
[43314.983161] wlp8s0: RX AssocResp from c6:8e:de:f7:06:ab (capab=0x1431 status=0 aid=2)
[43314.985976] wlp8s0: associated
[43315.005534] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[45936.537355] usb 3-2: new low-speed USB device number 4 using xhci_hcd
[45936.689098] usb 3-2: New USB device found, idVendor=4e53, idProduct=5407, bcdDevice= 1.00
[45936.689116] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[45936.689123] usb 3-2: Product: USB OPTICAL MOUSE
[45936.695040] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:4E53:5407.0005/input/input22
[45936.695356] hid-generic 0003:4E53:5407.0005: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-2/input0
[45936.699036] input: USB OPTICAL MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:4E53:5407.0006/input/input23
[45936.757969] input: USB OPTICAL MOUSE Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:4E53:5407.0006/input/input24
[45936.758479] input: USB OPTICAL MOUSE System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:4E53:5407.0006/input/input25
[45936.759355] hid-generic 0003:4E53:5407.0006: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:14.0-2/input1➜ ~ sudo systemd-analyze
Startup finished in 4.534s (kernel) + 2min 2.832s (userspace) = 2min 7.366s
graphical.target reached after 1min 37.493s in userspace➜ ~ sudo systemd-analyze blame
42.340s man-db.service
41.519s plymouth-quit-wait.service
36.007s apt-daily-upgrade.service
30.147s snapd.service
29.879s dev-sda5.device
27.471s networkd-dispatcher.service
22.079s udisks2.service
19.546s dev-loop17.device
19.152s dev-loop29.device
18.871s dev-loop34.device
18.634s dev-loop15.device
18.304s dev-loop37.device
18.129s dev-loop22.device
18.075s dev-loop45.device
17.761s dev-loop43.device
17.516s accounts-daemon.service
17.348s dev-loop42.device
17.255s dev-loop28.device
16.883s dev-loop30.device
16.863s dev-loop31.device
16.842s dev-loop36.device
16.768s dev-loop40.device
16.735s dev-loop41.device
16.717s dev-loop39.device
16.293s dev-loop44.device
15.523s dev-loop20.device
15.207s dev-loop14.device
15.008s dev-loop25.device
14.595s dev-loop33.device
14.526s dev-loop35.device
14.341s apt-daily.service
14.188s dev-loop32.device
14.160s dev-loop27.device
13.765s dev-loop24.device
13.760s polkit.service
13.625s avahi-daemon.service
13.621s bluetooth.service
13.582s NetworkManager.service
13.493s dev-loop23.device
13.286s dev-loop26.device
13.241s dev-loop8.device
13.217s dev-loop16.device
13.147s ModemManager.service
13.060s NetworkManager-wait-online.service
12.899s dev-loop19.device
12.892s dev-loop9.device
12.380s dev-loop12.device
12.034s dev-loop10.device
12.015s switcheroo-control.service
12.006s thermald.service
12.004s systemd-logind.service
12.001s wpa_supplicant.service
11.990s dev-loop18.device
11.891s dev-loop13.device
11.317s dev-loop21.device
11.250s dev-loop7.device
11.118s dev-loop11.device
9.699s systemd-rfkill.service
9.636s logrotate.service
9.420s dev-loop0.device
9.279s dev-loop4.device
7.429s dev-loop3.device
7.429s dev-loop2.device
7.270s systemd-journal-flush.service
6.943s gpu-manager.service
6.881s snapd.seeded.service
6.192s dev-loop6.device
6.069s dev-loop5.device
5.415s gdm.service
5.122s dev-loop1.device
4.816s apport.service
4.516s rsyslog.service
4.300s systemd-udevd.service
4.125s snapd.apparmor.service
3.891s upower.service
3.743s grub-common.service
3.726s e2scrub_reap.service
3.302s systemd-resolved.service
2.442s snap-sweeper-9.mount
2.357s user@1000.service
2.330s snap-gnome\x2d3\x2d38\x2d2004-87.mount
2.320s snap-inkscape-9090.mount
2.136s snap-inkscape-9256.mount
2.131s snap-musescore-216.mount
2.111s snap-snap\x2dstore-547.mount
2.097s snap-wekan-1836.mount
2.072s snap-shotcut-516.mount
2.062s snap-pomatez-2.mount
2.055s snap-snapd-13640.mount
2.036s snap-telegram\x2ddesktop-3149.mount
2.028s snap-hugo-11456.mount
2.025s snap-standard\x2dnotes-73.mount
2.006s snap-kde\x2dframeworks\x2d5-27.mount
1.978s snap-shotcut-474.mount
1.962s snap-vlc-2344.mount
1.955s apparmor.service
1.924s snap-telegram\x2ddesktop-3343.mount
1.920s snap-gtk\x2dcommon\x2dthemes-1515.mount
1.916s snap-gnome\x2d3\x2d34\x2d1804-77.mount
1.861s snap-gimp-372.mount
1.765s snap-hugo-11362.mount
1.755s snap-wekan-1828.mount
1.725s snap-snap\x2dstore-558.mount
1.705s snap-snapd-14066.mount
1.606s systemd-tmpfiles-setup.service
1.480s snap-bare-5.mount
1.462s colord.service
1.413s snap-beekeeper\x2dstudio-113.mount
1.347s snap-beekeeper\x2dstudio-115.mount
1.302s systemd-modules-load.service
1.297s snap-brave-137.mount
1.215s systemd-tmpfiles-setup-dev.service
1.131s snap-brave-138.mount
1.081s snap-canonical\x2dlivepatch-119.mount
1.056s snap-canonical\x2dlivepatch-126.mount
1.038s systemd-random-seed.service
1.020s snap-gnome\x2d3\x2d28\x2d1804-161.mount
995ms snap-code-81.mount
971ms snap-code-82.mount
945ms snap-core-11743.mount
931ms snap-core-11993.mount
928ms snap-gtk\x2dcommon\x2dthemes-1519.mount
858ms kerneloops.service
857ms snap-core18-2246.mount
847ms grub-initrd-fallback.service
846ms systemd-sysusers.service
830ms snap-core18-2253.mount
821ms snap-core20-1169.mount
820ms snap-gnome\x2d3\x2d34\x2d1804-72.mount
808ms snap-core20-1242.mount
798ms snap-discord-128.mount
793ms pppd-dns.service
775ms snap-discord-130.mount
749ms systemd-sysctl.service
746ms fwupd-refresh.service
739ms snap-gimp-380.mount
703ms systemd-backlight@backlight:intel_backlight.service
693ms smartmontools.service
679ms ua-timer.service
639ms keyboard-setup.service
639ms systemd-journald.service
577ms systemd-udev-trigger.service
477ms swapfile.swap
466ms systemd-timesyncd.service
437ms binfmt-support.service
426ms openvpn.service
348ms ufw.service
307ms dev-hugepages.mount
305ms dev-mqueue.mount
303ms sys-kernel-debug.mount
301ms sys-kernel-tracing.mount
296ms kmod-static-nodes.service
296ms modprobe@drm.service
265ms rtkit-daemon.service
240ms setvtrgb.service
238ms systemd-update-utmp.service
174ms systemd-fsck@dev-disk-by\x2duuid-A76C\x2dFE89.service
161ms console-setup.service
149ms systemd-remount-fs.service
121ms plymouth-start.service
118ms systemd-user-sessions.service
112ms systemd-tmpfiles-clean.service
107ms proc-sys-fs-binfmt_misc.mount
74ms user-runtime-dir@1000.service
52ms boot-efi.mount
45ms snap-standard\x2dnotes-74.mount
42ms motd-news.service
18ms alsa-restore.service
12ms plymouth-read-write.service
9ms dev-loop46.device
8ms systemd-update-utmp-runlevel.service
6ms sys-fs-fuse-connections.mount
4ms sys-kernel-config.mount
1ms snapd.socket
lines 141-174/174 (END)➜ ~ sudo systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @1min 37.493s
└─multi-user.target @1min 37.492s
└─snapd.seeded.service @1min 13.971s +6.881s
└─snapd.service @43.821s +30.147s
└─basic.target @42.112s
└─sockets.target @42.112s
└─snapd.socket @42.111s +1ms
└─sysinit.target @42.031s
└─snapd.apparmor.service @37.905s +4.125s
└─apparmor.service @35.948s +1.955s
└─local-fs.target @35.946s
└─run-user-1000-gvfs.mount @1min 27.144s
└─run-user-1000.mount @1min 13.362s
└─local-fs-pre.target @8.165s
└─systemd-tmpfiles-setup-dev.service @6.949s +1.215s
└─systemd-sysusers.service @6.099s +846ms
└─systemd-remount-fs.service @5.750s +149ms
└─systemd-journald.socket @5.447s
└─system.slice @5.436s
└─-.slice @5.436sIl y a un problème avec les drivens de la carte graphique nan ?
Après quelques recherches je me retrouve là, la carte graphique de l'ordi ([Radeon HD 8730M]) n'est pas referencée sur cette page donc n'a pas de VCE ?
Ça signifie ce problème ne peut pas être résolu ?
Hors ligne
#8 Le 28/11/2021, à 00:14
- iznobe
Re : [Résolu]Ubuntu lent au démarrage
Bonsoir , d' apres moi ce qui ralentit grandement ton demarrage c ' est tout les SNAPS installés ( 45 paquets snap j ' ai cru voir ) , environ 30 sec rien que pour eux et les services dont ils ont besoin .
Qu ' est ce qui te fait dire qu ' il y a un probleme avec la carte graphique ? a cette heure-ci , je n ' y vois plus grand chose 
Donne le retour de
snap list stp
et aussi
sudo dmesg | grep errorcar un dmesg sans tri , c ' est un peu pas buvable ...
Dernière modification par iznobe (Le 28/11/2021, à 00:19)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#9 Le 28/11/2021, à 09:20
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
Bonjour,
C'est ici que tu vois le problème lié a snap ?
[ 174.731944] audit: type=1400 audit(1638086270.621:108): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=3791 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 671.438960] wlp8s0: authenticate with c6:8e:de:f7:06:able retour de snap list :
➜ ~ snap list
Nom Version Révision Suivi Éditeur Notes
bare 1.0 5 latest/stable canonical✓ base
beekeeper-studio 2.1.5 115 latest/stable matthew-rathbone -
brave 1.32.113 138 latest/stable brave -
canonical-livepatch 10.1.2 126 latest/stable canonical✓ -
code ccbaa2d2 82 latest/stable vscode✓ classic
core 16-2.52.1 11993 latest/stable canonical✓ core
core18 20211028 2253 latest/stable canonical✓ base
core20 20211115 1242 latest/stable canonical✓ base
discord 0.0.16 130 latest/stable snapcrafters -
gimp 2.10.28 380 latest/stable snapcrafters -
gnome-3-28-1804 3.28.0-19-g98f9e67.98f9e67 161 latest/stable canonical✓ -
gnome-3-34-1804 0+git.3556cb3 77 latest/stable/… canonical✓ -
gnome-3-38-2004 0+git.cd626d1 87 latest/stable canonical✓ -
gtk-common-themes 0.1-59-g7bca6ae 1519 latest/stable/… canonical✓ -
hugo v0.89.4 11456 latest/stable hugo-authors -
inkscape 1.1.1-eb90963e84-2021-10-02 9256 latest/stable inkscape✓ -
kde-frameworks-5 5.47.0 27 latest/stable kde✓ -
musescore 3.6.2 216 latest/stable musescore✓ -
pomatez 1.1.0 2 latest/stable roldanjrdevslife -
shotcut 21.10.31 516 latest/stable meltytech✓ classic
snap-store 3.38.0-66-gbd5b8f7 558 latest/stable/… canonical✓ -
snapd 2.53.2 14066 latest/stable canonical✓ snapd
standard-notes 3.9.5 74 latest/stable standardnotes✓ -
sweeper master+35d66ca 9 latest/edge kde✓ -
telegram-desktop 3.2.2 3343 latest/stable telegram.desktop -
vlc 3.0.16 2344 latest/stable videolan✓ -
wekan 5.80 1836 latest/stable xet7 -Le retour de la deuxième commande :
➜ ~ sudo dmesg | grep error
[sudo] Mot de passe de elmer :
[ 10.677362] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 22.780195] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.DD02._BCL due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
➜ ~ sudo dmesg | grep Error
[ 1.622503] RAS: Correctable Errors collector initialized.
[ 22.780178] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20201113/psargs-330)
[ 22.780195] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.DD02._BCL due to previous error (AE_NOT_FOUND) (20201113/psparse-529)Pour la carte graphique c'est les lignes suivantes qui me font penser à un problème :
➜ ~ sudo dmesg | grep VCE
[ 32.558615] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 32.684827] radeon 0000:01:00.0: failed VCE resume (-110).
[ 45.460035] radeon 0000:01:00.0: failed VCE resume (-110).
[ 63.627449] radeon 0000:01:00.0: failed VCE resume (-110).
[ 89.406558] radeon 0000:01:00.0: failed VCE resume (-110).
[ 106.011587] radeon 0000:01:00.0: failed VCE resume (-110).Hors ligne
#10 Le 28/11/2021, à 09:25
- xubu1957
Re : [Résolu]Ubuntu lent au démarrage
Bonjour,
Montre, en te servant du Retour utilisable de commande :
lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"uname -adpkg -l | grep -v ^iiTu peux essayer :
Le 13/12/2018, cqfd93 a écrit :
Bingo !
Je te suggère de supprimer ce snap, de faire les mises à jour et d'installer à la place la version des dépôts (donne les 4 retours) :
sudo snap remove vlc sudo apt update sudo apt full-upgrade sudo apt install vlc
_ _ _
J'avais lu :
Le 04/04/2019, nam1962 a écrit :
Pour Discord :
sudo snap remove discordPuis l'installer via flatpak (version la plus efficace)
sudo apt install flatpak sudo apt install gnome-software-plugin-flatpak flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo flatpak install flathub com.discordapp.Discord
> /viewtopic.php?pid=22077195#p22077195
Dernière modification par xubu1957 (Le 28/11/2021, à 09:35)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#11 Le 28/11/2021, à 09:35
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
Merci pour les infos sur le retour utilisable de commande ;-)
elmer@Nouille:~$ lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8730M] [1002:6601] (prog-if 00 [VGA controller])
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu
elmer@Nouille:~$ elmer@Nouille:~$ uname -a
Linux Nouille 5.11.0-40-generic #44~20.04.2-Ubuntu SMP Tue Oct 26 18:07:44 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
elmer@Nouille:~$ elmer@Nouille:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-==========================================-=====================================-============-======================================================================================================
rc linux-image-5.11.0-25-generic 5.11.0-25.27~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.11.0-36-generic 5.11.0-36.40~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.4.0-26-generic 5.4.0-26.30 amd64 Signed kernel image generic
rc linux-image-5.8.0-63-generic 5.8.0-63.71~20.04.1 amd64 Signed kernel image generic
rc linux-modules-5.11.0-25-generic 5.11.0-25.27~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.11.0-36-generic 5.11.0-36.40~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-26-generic 5.4.0-26.30 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.8.0-63-generic 5.8.0-63.71~20.04.1 amd64 Linux kernel extra modules for version 5.8.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-25-generic 5.11.0-25.27~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-36-generic 5.11.0-36.40~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-26-generic 5.4.0-26.30 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.8.0-63-generic 5.8.0-63.71~20.04.1 amd64 Linux kernel extra modules for version 5.8.0 on 64 bit x86 SMP
elmer@Nouille:~$ Je test la réinstallation de vlc et je vous tiens au courant.
Hors ligne
#12 Le 28/11/2021, à 09:39
- xubu1957
Re : [Résolu]Ubuntu lent au démarrage
Regarde aussi si tu peux utiliser des commandes de fx.0
_ _ _
Pour nettoyer :
Le 11/02/2017, moko138 a écrit :
Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
Pour info, les précisions de nany, pour la commande de nettoyage et une possibilité d'automatisation.
_ _ _
Essaye aussi :
snap list --all | awk '/désactivé|disabled/{print $1, $3}' | while read snapname revision; do sudo snap remove "$snapname" --revision="$revision"; done> cette autre commande de nany
_ _ _
Pour ton duo de cartes graphiques, sur le forum, il y a eu ce fil > Dell inspiron 15R. PBM Radeon HD8730
Dernière modification par xubu1957 (Le 28/11/2021, à 09:50)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#13 Le 28/11/2021, à 10:15
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
J'ai réinstallé vlc comme indiqué, ça s'est bien passé, je sais pas si les retours sont intéressants. (?)
J'ai complètement désinstallé discord, il ne sera pas utile pour la personne qui utilisera l'ordi.
Les commandes de fx.0 :
elmer@Nouille:~$ systemd-analyze
Startup finished in 4.121s (kernel) + 1min 27.020s (userspace) = 1min 31.142s
graphical.target reached after 1min 26.922s in userspace
elmer@Nouille:~$ elmer@Nouille:~$ systemd-analyze blame
36.913s plymouth-quit-wait.service
26.428s snapd.service
25.679s dev-sda5.device
24.942s networkd-dispatcher.service
19.042s udisks2.service
17.116s accounts-daemon.service
15.705s dev-loop19.device
15.506s dev-loop15.device
14.582s dev-loop9.device
14.381s dev-loop14.device
13.886s dev-loop18.device
13.757s dev-loop23.device
13.443s dev-loop20.device
13.364s dev-loop22.device
13.217s dev-loop24.device
13.056s polkit.service
12.752s avahi-daemon.service
12.751s bluetooth.service
12.635s NetworkManager.service
12.346s dev-loop17.device
12.276s dev-loop16.device
11.777s dev-loop10.device
11.645s switcheroo-control.service
11.639s thermald.service
11.637s systemd-logind.service
11.634s wpa_supplicant.service
11.484s dev-loop8.device
10.953s dev-loop21.device
10.933s dev-loop11.device
10.403s dev-loop13.device
10.009s dev-loop12.device
9.695s ModemManager.service
9.335s dev-loop4.device
8.673s dev-loop7.device
7.994s gpu-manager.service
7.970s dev-loop5.device
7.894s dev-loop2.device
7.871s apport.service
7.816s dev-loop6.device
7.655s dev-loop3.device
7.119s dev-loop1.device
7.114s smartmontools.service
6.947s systemd-journal-flush.service
5.197s dev-loop0.device
4.519s rsyslog.service
4.237s systemd-udevd.service
4.037s gdm.service
3.977s systemd-rfkill.service
3.903s grub-common.service
2.968s snapd.apparmor.service
2.406s systemd-resolved.service
2.349s e2scrub_reap.service
1.935s apparmor.service
1.552s colord.service
1.524s systemd-tmpfiles-setup.service
1.500s packagekit.service
1.437s fwupd.service
1.333s upower.service
1.293s systemd-modules-load.service
1.194s snap-inkscape-9256.mount
1.170s user@1000.service
1.122s snap-bare-5.mount
1.119s snap-sweeper-9.mount
1.078s systemd-tmpfiles-setup-dev.service
1.077s snap-beekeeper\x2dstudio-115.mount
1.014s kerneloops.service
952ms snap-standard\x2dnotes-74.mount
885ms snap-brave-138.mount
867ms snap-canonical\x2dlivepatch-126.mount
857ms snap-code-82.mount
854ms snap-core-11993.mount
851ms snap-core18-2253.mount
845ms snap-kde\x2dframeworks\x2d5-27.mount
832ms systemd-sysusers.service
823ms snap-core20-1242.mount
816ms systemd-sysctl.service
784ms snap-pomatez-2.mount
770ms snap-gimp-380.mount
734ms snap-wekan-1836.mount
711ms systemd-random-seed.service
674ms snap-telegram\x2ddesktop-3343.mount
665ms keyboard-setup.service
646ms grub-initrd-fallback.service
568ms systemd-backlight@backlight:intel_backlight.service
557ms snap-snapd-14066.mount
552ms snap-shotcut-516.mount
521ms snap-snap\x2dstore-558.mount
520ms snap-gnome\x2d3\x2d28\x2d1804-161.mount
506ms systemd-udev-trigger.service
504ms snap-musescore-216.mount
480ms snap-gnome\x2d3\x2d34\x2d1804-77.mount
443ms swapfile.swap
434ms snap-gnome\x2d3\x2d38\x2d2004-87.mount
424ms systemd-timesyncd.service
416ms snap-hugo-11456.mount
400ms binfmt-support.service
394ms snap-gtk\x2dcommon\x2dthemes-1519.mount
373ms systemd-journald.service
367ms dev-hugepages.mount
366ms dev-mqueue.mount
364ms sys-kernel-debug.mount
363ms openvpn.service
363ms sys-kernel-tracing.mount
362ms alsa-restore.service
357ms kmod-static-nodes.service
356ms modprobe@drm.service
310ms ufw.service
274ms pppd-dns.service
178ms console-setup.service
175ms rtkit-daemon.service
175ms systemd-fsck@dev-disk-by\x2duuid-A76C\x2dFE89.service
167ms systemd-user-sessions.service
152ms plymouth-start.service
139ms snapd.seeded.service
130ms systemd-update-utmp.service
129ms systemd-remount-fs.service
94ms setvtrgb.service
66ms user-runtime-dir@1000.service
61ms proc-sys-fs-binfmt_misc.mount
58ms boot-efi.mount
12ms plymouth-read-write.service
9ms sys-fs-fuse-connections.mount
8ms systemd-update-utmp-runlevel.service
7ms sys-kernel-config.mount
1ms snapd.socket
elmer@Nouille:~$ --------
J'ai fais le nettoyage de snap
elmer@Nouille:~$ snap list --all | awk '/désactivé|disabled/{print $1, $3}' | while read snapname revision; do sudo snap remove "$snapname" --revision="$revision"; done
beekeeper-studio (révision 113) supprimé
brave (révision 137) supprimé
canonical-livepatch (révision 119) supprimé
code (révision 81) supprimé
core (révision 11743) supprimé
core18 (révision 2246) supprimé
core20 (révision 1169) supprimé
gimp (révision 372) supprimé
gnome-3-34-1804 (révision 72) supprimé
gtk-common-themes (révision 1515) supprimé
hugo (révision 11362) supprimé
inkscape (révision 9090) supprimé
shotcut (révision 474) supprimé
snap-store (révision 547) supprimé
snapd (révision 13640) supprimé
standard-notes (révision 73) supprimé
telegram-desktop (révision 3149) supprimé
wekan (révision 1828) supprimé
elmer@Nouille:~$ --------------
Pour la carte graphique je suppose que si il n'y a pas eu de mise à jour de Catalyst depuis 2014 ça risque pas d'arriver.
Hors ligne
#14 Le 28/11/2021, à 10:32
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
J'ai continué le fil de fx.0, j'ai refais
sudo systemctl disable plymouth-quit-wait.servicepuis
sudo systemctl mask plymouth-quit-wait.serviceJ'ai fais un redémarrage, qui était beaucoup moins long (whouuuuuuu !!), voici les retours de systemd-analyze après le redémarrage.
elmer@Nouille:~$ systemd-analyze
Startup finished in 4.203s (kernel) + 1min 8.078s (userspace) = 1min 12.282s
graphical.target reached after 1min 7.843s in userspace
elmer@Nouille:~$ elmer@Nouille:~$ systemd-analyze blame
28.838s dev-sda5.device
26.723s snapd.service
25.063s networkd-dispatcher.service
18.046s udisks2.service
17.294s accounts-daemon.service
17.151s dev-loop13.device
16.307s dev-loop16.device
14.517s dev-loop10.device
14.508s dev-loop9.device
14.504s dev-loop11.device
14.224s dev-loop14.device
14.139s dev-loop17.device
14.072s dev-loop19.device
13.978s dev-loop21.device
13.955s dev-loop20.device
13.844s dev-loop23.device
13.818s dev-loop22.device
13.004s NetworkManager.service
11.776s avahi-daemon.service
11.772s bluetooth.service
11.563s dev-loop24.device
11.425s dev-loop12.device
11.389s polkit.service
11.314s dev-loop18.device
11.068s dev-loop4.device
11.017s dev-loop15.device
10.706s dev-loop8.device
10.307s ModemManager.service
10.270s switcheroo-control.service
10.262s thermald.service
10.259s systemd-logind.service
10.257s wpa_supplicant.service
10.134s dev-loop6.device
8.829s dev-loop2.device
8.807s dev-loop5.device
8.763s dev-loop7.device
8.210s systemd-journal-flush.service
7.593s dev-loop3.device
7.429s dev-loop1.device
7.242s gpu-manager.service
6.792s smartmontools.service
6.202s dev-loop0.device
6.151s apport.service
5.115s systemd-rfkill.service
4.991s systemd-udevd.service
4.659s rsyslog.service
4.151s gdm.service
2.909s grub-common.service
2.457s snapd.apparmor.service
2.157s apparmor.service
2.104s plymouth-start.service
2.063s systemd-resolved.service
1.998s grub-initrd-fallback.service
1.856s fwupd.service
1.645s user@1000.service
1.435s upower.service
1.422s e2scrub_reap.service
1.374s colord.service
1.355s snap-bare-5.mount
1.335s systemd-modules-load.service
1.259s snap-pomatez-2.mount
1.230s systemd-tmpfiles-setup.service
1.166s snap-beekeeper\x2dstudio-115.mount
1.078s snap-musescore-216.mount
1.045s snap-sweeper-9.mount
1.044s systemd-tmpfiles-setup-dev.service
1.019s snap-brave-138.mount
982ms snap-inkscape-9256.mount
978ms snap-canonical\x2dlivepatch-126.mount
958ms snap-code-82.mount
946ms snap-core-11993.mount
910ms snap-core18-2253.mount
891ms systemd-random-seed.service
861ms snap-core20-1242.mount
838ms systemd-sysctl.service
838ms snap-gimp-380.mount
800ms systemd-sysusers.service
773ms snap-telegram\x2ddesktop-3343.mount
771ms snap-snap\x2dstore-558.mount
752ms snap-shotcut-516.mount
748ms snap-hugo-11456.mount
740ms pppd-dns.service
721ms snap-standard\x2dnotes-74.mount
681ms keyboard-setup.service
678ms systemd-journald.service
678ms modprobe@drm.service
678ms snap-wekan-1836.mount
637ms systemd-udev-trigger.service
636ms snap-kde\x2dframeworks\x2d5-27.mount
618ms snap-snapd-14066.mount
601ms systemd-timesyncd.service
576ms snap-gnome\x2d3\x2d28\x2d1804-161.mount
574ms systemd-backlight@backlight:intel_backlight.service
562ms swapfile.swap
546ms snap-gnome\x2d3\x2d34\x2d1804-77.mount
533ms snap-gtk\x2dcommon\x2dthemes-1519.mount
483ms snap-gnome\x2d3\x2d38\x2d2004-87.mount
434ms ufw.service
422ms binfmt-support.service
296ms systemd-update-utmp.service
264ms dev-hugepages.mount
261ms dev-mqueue.mount
260ms sys-kernel-debug.mount
259ms sys-kernel-tracing.mount
254ms kmod-static-nodes.service
234ms snapd.seeded.service
194ms plymouth-read-write.service
180ms console-setup.service
169ms systemd-fsck@dev-disk-by\x2duuid-A76C\x2dFE89.service
138ms setvtrgb.service
116ms systemd-remount-fs.service
92ms kerneloops.service
86ms rtkit-daemon.service
82ms proc-sys-fs-binfmt_misc.mount
78ms user-runtime-dir@1000.service
53ms openvpn.service
49ms boot-efi.mount
22ms systemd-user-sessions.service
11ms systemd-update-utmp-runlevel.service
8ms alsa-restore.service
7ms sys-fs-fuse-connections.mount
4ms sys-kernel-config.mount
1ms snapd.socket
elmer@Nouille:~$ Ça me semble toujours un peu long mais il est possible que je sois trop habitué aux démarrages avec un SSD 
Avec un HDD c'est un temps de démarrage raisonnable il me semble ?
--------
Par contre j'ai mis un chronomètre après avoir appuyer sur le bouton de démarrage et j'obtiens 2 minutes 40 environ. Pourquoi une telle différence avec le résultat de systemd-analyze ?
Dernière modification par joeletouffu (Le 28/11/2021, à 10:46)
Hors ligne
#15 Le 28/11/2021, à 10:39
- xubu1957
Re : [Résolu]Ubuntu lent au démarrage
Je me sers d'un vieil ordi, et je nettoie mes lunettes pendant qu'il démarre ! 
Tu avais vu pour discord (fin du message #10) ?
_ _ _
Fournis les noyaux présents :
echo; dpkg -l | awk '!/^rc/ && / linux-(c|g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3V | column -t"}' ; echo -e "\nNoyau courant : $(uname -mr)"_ _ _
(edit=messages regroupés)
_ _ _
Montre aussi :
lshw -c videopour comparer avec > askubuntu.com/questions/1287211/issue-after-upgraded-from-ubuntu-18-04-lts-to-latest-ubuntu-20-04-lts
Dernière modification par xubu1957 (Le 28/11/2021, à 11:21)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#16 Le 28/11/2021, à 10:56
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
xubu1957 a écrit :
Je me sers d'un vieil ordi, et je nettoie mes lunettes pendant qu'il démarre !
Tu avais vu pour discord (fin du message #10) ?
_ _ _
Fournis les noyaux présents :
echo; dpkg -l | awk '!/^rc/ && / linux-(c|g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3V | column -t"}' ; echo -e "\nNoyau courant : $(uname -mr)"
Le retour de la commande :
elmer@Nouille:~$ echo; dpkg -l | awk '!/^rc/ && / linux-(c|g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3V | column -t"}' ; echo -e "\nNoyau courant : $(uname -mr)"
ii linux-hwe-5.11-headers-5.11.0-38 5.11.0-38.42~20.04.1 all
ii linux-headers-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64
ii linux-image-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64
ii linux-modules-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64
ii linux-modules-extra-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64
ii linux-hwe-5.11-headers-5.11.0-40 5.11.0-40.44~20.04.2 all
ii linux-headers-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64
ii linux-image-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64
ii linux-modules-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64
ii linux-modules-extra-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64
ii linux-generic-hwe-20.04 5.11.0.40.44~20.04.18 amd64
ii linux-headers-generic-hwe-20.04 5.11.0.40.44~20.04.18 amd64
ii linux-image-generic-hwe-20.04 5.11.0.40.44~20.04.18 amd64
Noyau courant : 5.11.0-40-generic x86_64
elmer@Nouille:~$ Hors ligne
#17 Le 28/11/2021, à 11:03
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
xubu1957 a écrit :
Montre aussi :
lshw -c videopour comparer avec > askubuntu.com/questions/1287211/issue-after-upgraded-from-ubuntu-18-04-lts-to-latest-ubuntu-20-04-lts
elmer@Nouille:~$ sudo lshw -c video
[sudo] Mot de passe de elmer :
*-display
description: VGA compatible controller
produit: Mars [Radeon HD 8730M]
fabricant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration : driver=radeon latency=0
ressources : irq:35 mémoire:a0000000-afffffff mémoire:c0000000-c003ffff portE/S:3000(taille=256) mémoire:c0040000-c005ffff
*-display
description: VGA compatible controller
produit: 3rd Gen Core processor Graphics Controller
fabricant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 09
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration : driver=i915 latency=0
ressources : irq:34 mémoire:c1000000-c13fffff mémoire:b0000000-bfffffff portE/S:4000(taille=64) mémoire:c0000-dffff
elmer@Nouille:~$ La seule différence que je vois est au niveau de ressources : irq:35/34 pour moi 33/32 pour l'autre personne.
Hors ligne
#18 Le 28/11/2021, à 11:20
- xubu1957
Re : [Résolu]Ubuntu lent au démarrage
Pour les cartes graphiques, il faudrait des aidants connaisseurs.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#19 Le 28/11/2021, à 13:26
- joeletouffu
Re : [Résolu]Ubuntu lent au démarrage
Ok, merci beaucoup pour votre aide. Je creuserai pour les cartes graphiques sur un autre poste quand j'aurai du temps. Je pense que je peux mettre en résolu.
Pour les prochains qui passerai par ici, cf les messages #10 et #12.
Merci encore.
Hors ligne
Pages : 1