#26 Le 14/01/2022, à 20:12
- MicP
Re : pc ne demarre plus besoin d un specialiste du Grub
Perso, je commencerai par tester en changeant l'alimentation
parce que si c'est l'alimentation ou/et la carte mère ou/et le microprocesseur douteux qui sont en défaut,
l'alimentation a tout ce qu'il faut pour se mettre en sécurité et donc se protéger
par contre, le microprocesseur en bon état, lui, risque de subir ce que l'autre a déjà subit à cause d'une alim ou/et carte mère en panne.
et un processeur I7, c'est quand même bien plus cher qu'une alimentation.
Si l'essai n'est pas concluant avec l'alimentation en bon état,
tu pourras ensuite tester ensuite le processeur douteux sur la carte mère + alimentation qui sont en bon état
et si ça alimentation en bon état + carte mère en bon état + processeur douteux fonctionnent, on pourra dire que le défaut vient de la carte mère.
Dernière modification par MicP (Le 14/01/2022, à 20:13)
Hors ligne
#27 Le 14/01/2022, à 20:15
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
@MicP , ou bien tester le proc de son ordi , a la place du i7 , comme je le disais dans mon message precedent .
quel serait le risque si le processeur est mort ? vu que sur l' ordi avec i7 , tout est operationnel .
je n' ai vu qu ' une seule fois un processeur qui chauffait comme un malade et encore jamais de processeur " mort " completement .
Dernière modification par iznobe (Le 14/01/2022, à 20:17)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#28 Le 14/01/2022, à 20:19
- MicP
Re : pc ne demarre plus besoin d un specialiste du Grub
Attend : on propose la même chose, à part que je propose de commencer par mettre l'alimentation en bon état sur la carte douteuse avec le processeur douteux
c'est moi qui n'avais pas bien lu ton message.
Désolé
Dernière modification par MicP (Le 14/01/2022, à 20:20)
Hors ligne
#29 Le 14/01/2022, à 21:04
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
je vous remercie de vos conseil , je verrais si l'alim est compatible car le pc que j'ai récupérer est un petit desktop surement avec une carte micro atx tandis que celui qui est en panne est un atx donc je verrai en ouvrant demain si c'est compatible
Hors ligne
#30 Le 14/01/2022, à 21:43
- MicP
Re : pc ne demarre plus besoin d un specialiste du Grub
Ah oui, c'est sûr que si ce ne sont pas des alimentations du même type
la question du test de l'alimentation ne se pose même pas
Hors ligne
#31 Le 15/01/2022, à 18:51
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
Bon me revoici , l'alim comme je le craignais n'est pas compatible , maintenant ce petit pc avec un i7 va très bien et je pense que je vais le garder tel quel a la place de celui qui ne va plus , plutôt que d'essayer d'échanger les processeur etc ... et risquer de flinguer ce petit pc .
par contre j'ai remis mon disque dur avec Ubuntu dedans et il ne veux pas se lancer , écran noir et rien ne s'ouvre , j'ai donc essayer de changer le boot avec boot repair mais ca ne marche pas apparemment a cause de l'efi , un conseil a me donner , réinstaller Ubuntu pour avoir un double amorcage correct ( après avoir sauvegarder mon home ) , je pense qu'il ne reconnait pas ce pc et c'est pourquoi il ne se lance pas
Hors ligne
#32 Le 16/01/2022, à 09:44
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
Bonjour , dans ce PC , il ne faut rien changer dans un 1er temps ,juste y ajouter ton disque de l' ancien .
Comporte il un OS ubuntu ou linux ?
Si oui , dans ce cas il faut utiliser le navigateur de fichier afin de monter graphiquement les partitions de l ' "ancien disque " , et y recuperer tes données .
Dernière modification par iznobe (Le 16/01/2022, à 09:47)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#33 Le 16/01/2022, à 09:51
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
non il n'y a que win 10 , c'est peut etre une histoire de pilote proprietaire l'ancien pc avait une carte graphique nvidia tandis que le desktop c'est du intel 4600 integre a la cm
Hors ligne
#34 Le 16/01/2022, à 09:59
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
bon , faut que je redemarre mon ordi sous windows .
il existe un programme qui permet de monter et utiliser les partitions au format ext4 , afin d' y recuperer tes données importantes , mais je ne me rapelle plus le nom .
Attention toutefois , c ' est un programme experimental , à n ' utiliser qu ' en dernier recours ! dont le resultat n' est pas garanti
a dans 2 min .
EDIT : le programme en question se nomme " ext2fsd " .
il permet ( logiquement ) de monter les partition aux formats " ext x " , de naviguer et d ' en copier les fichiers que l' on desire .
un conseil , ne fait pas de modification sur ton disque ubuntu avec ce logiciel , qui n' est pas vraiment secure puisque experimental .
voici ce qu ca donne :
https://zupimages.net/viewer.php?id=22/02/klpa.png
Dernière modification par iznobe (Le 16/01/2022, à 10:08)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#35 Le 16/01/2022, à 10:06
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
si ce n'est que pour copier , faire une sauvegarde , j'ai un linux Mint sur usb qui fonctionne très bien , je reviens dans 5 min
Dernière modification par Henri56 (Le 16/01/2022, à 10:07)
Hors ligne
#36 Le 16/01/2022, à 10:11
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
ha ben si tu as un live USB LM c ' est certainement bien plus propre
ca permettra par la meme occasion aussi de verifier que ce disque n ' est pas mort .
Dernière modification par iznobe (Le 16/01/2022, à 10:12)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#37 Le 16/01/2022, à 10:29
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
non le disque n'est pas mort , je sais lancer dessus jusqu'au menu de l'ancien dual boot mais quand je choisi ubuntu , il se lance mais n'arrive pas sur le bureau , ecran noir et rien ne se passe , j'ai essayé ubuntu recovery mais pareil , je vois meme une partition en ntfs sous le win 10 donc ce disque va bien
Dernière modification par Henri56 (Le 16/01/2022, à 10:37)
Hors ligne
#38 Le 16/01/2022, à 11:06
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
je pense que je vais réinstaller Ubuntu en faisant la procédure " sans toucher au Home " qu'est-ce que tu en pense ?
Hors ligne
#39 Le 16/01/2022, à 11:25
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
tu peux toujours tenter , vu que a priori le probleme n' est pas dans le /home .
jusqu ' a present on s' etait orienté vers une panne materielle a cause de la coupure de courant , il se peut que ca ne soit que logiciel .
Maintenant que tu as un live USB et un ordi fonctionnel avec le disque dur potentiellement en panne dans cet ordi , tu pourrais d ' abord fournir un boot-info avant de refaire une installation , des fois que ca soit reparable facilement .
une fois sur le live passe cette commande et donne le lien ou resultat ici
sudo add-apt-repository -y ppa:yannubuntu/boot-repair ; sudo apt update ; sudo apt install -y boot-info ; boot-info
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#40 Le 16/01/2022, à 11:52
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
ok mais j'en ai pour 15 min au moins
Hors ligne
#41 Le 16/01/2022, à 12:02
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
ça a été plus vite que je ne pensais voici . https://paste.ubuntu.com/p/ZzgzYDgbpy/
Hors ligne
#42 Le 16/01/2022, à 12:05
- MicP
Re : pc ne demarre plus besoin d un specialiste du Grub
… je pense que je vais le garder tel quel a la place de celui qui ne va plus , plutôt que d'essayer d'échanger les processeur etc . …
Très sage et prudente décision.
Hors ligne
#43 Le 16/01/2022, à 12:05
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
collage du boot-info pour les specialistes :
Boot Info Script 71f6c5c + Boot-Repair extra info [Boot-Info 16mar2020]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
=> Windows 7/8/2012 is installed in the MBR of /dev/sdc.
=> No known boot loader is installed in the MBR of /dev/sdd.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sdb1
and looks at sector 191646792 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /syslinux/syslinux.cfg
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Operating System:
Boot files: /boot/grub/grub.cfg
sdd2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdd2 starts
at sector 0. But according to the info from fdisk,
sdd2 starts at sector 648. According to the info in
the boot sector, sdd2 has 0 sectors.
Operating System:
Boot files: /efi/boot/bootx64.efi /efi/boot/grubx64.efi
/efi/boot/mmx64.efi
sdd3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.25 GiB, 128035676160 bytes, 250069680 sectors
Disk model: SanDisk SD7SB3Q-
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sda1 ends after the last sector of /dev/sda
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 + 2,048 206,847 204,800 EFI System partition
/dev/sda2 + 206,848 239,615 32,768 Microsoft Reserved Partition (Windows)
/dev/sda3 239,616 248,995,169 248,755,554 Data partition (Windows/Linux)
/dev/sda4 + R 248,995,840 250,066,943 1,071,104 Windows Recovery Environment (Windows)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk model: TOSHIBA DT01ACA0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 308,662,204 308,660,157 83 Linux
/dev/sdb2 308,662,272 718,262,271 409,600,000 83 Linux
/dev/sdb3 718,262,272 976,773,119 258,510,848 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 298.9 GiB, 320072933376 bytes, 625142448 sectors
Disk model: WDC WD3200BEKX-7
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 625,139,711 625,137,664 7 NTFS / exFAT / HPFS
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 7.51 GiB, 8053063680 bytes, 15728640 sectors
Disk model: Flash Disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 0 3,876,543 3,876,544 0 Empty
/dev/sdd2 648 8,583 7,936 ef EFI (FAT-12/16/32)
/dev/sdd3 3,878,912 15,728,639 11,849,728 83 Linux
/dev/sdd1 overlaps with /dev/sdd2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdd1 + R 0 3,876,487 3,876,488 Data partition (Windows/Linux)
/dev/sdd2 + R 648 8,583 7,936 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/nvme0n1p1 9e404df2-7ba5-4306-a171-912a6f5814f5 ext4
/dev/nvme0n1p2 720731E15319FF48 ntfs
/dev/nvme0n1p3 720731E15319FF48 ntfs
/dev/sda1 520E-296B vfat
/dev/sda2
/dev/sda3 8CA40F38A40F23F4 ntfs
/dev/sda4 567099EC7099D2DB ntfs
/dev/sdb1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ext4
/dev/sdb2 d2689a15-377f-4ede-bb3e-eb635db42583 ext4
/dev/sdb3 3E6406A50CD98978 ntfs
/dev/sdc1 9AACFB38ACFB0D8F ntfs
/dev/sdd1 2020-06-24-19-01-47-00 iso9660 Linux Mint 20 Cinnamon 64-bit
/dev/sdd2 1AC3-20ED vfat
/dev/sdd3
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 16 10:58 ata-SanDisk_SD7SB3Q-128G-1006_153916400244 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 10:58 ata-SanDisk_SD7SB3Q-128G-1006_153916400244-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 16 10:58 ata-SanDisk_SD7SB3Q-128G-1006_153916400244-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 16 10:59 ata-SanDisk_SD7SB3Q-128G-1006_153916400244-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 16 10:59 ata-SanDisk_SD7SB3Q-128G-1006_153916400244-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Jan 16 10:58 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 16 10:58 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 16 10:58 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 16 10:59 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Jan 16 10:58 ata-WDC_WD3200BEKX-75B7WT0_WD-WX81AB3H8258 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jan 16 10:59 ata-WDC_WD3200BEKX-75B7WT0_WD-WX81AB3H8258-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Jan 16 10:56 ata-hp_DVD_A_DS8ACSH_426538921486 -> ../../sr0
lrwxrwxrwx 1 root root 13 Jan 16 10:58 nvme-WDC_WDS100T2B0C_21376P800074 -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Jan 16 10:58 nvme-WDC_WDS100T2B0C_21376P800074-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Jan 16 10:59 nvme-WDC_WDS100T2B0C_21376P800074-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Jan 16 10:59 nvme-WDC_WDS100T2B0C_21376P800074-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 13 Jan 16 10:58 nvme-eui.e8238fa6bf530001001b448b4106f82d -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Jan 16 10:58 nvme-eui.e8238fa6bf530001001b448b4106f82d-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Jan 16 10:59 nvme-eui.e8238fa6bf530001001b448b4106f82d-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Jan 16 10:59 nvme-eui.e8238fa6bf530001001b448b4106f82d-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 9 Jan 16 10:56 usb-EPSON_Storage_583435543035313644-0:0 -> ../../sde
lrwxrwxrwx 1 root root 9 Jan 16 10:58 usb-Generic_Flash_Disk_B29D99D4-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 10 Jan 16 10:58 usb-Generic_Flash_Disk_B29D99D4-0:0-part1 -> ../../sdd1
lrwxrwxrwx 1 root root 10 Jan 16 10:58 usb-Generic_Flash_Disk_B29D99D4-0:0-part2 -> ../../sdd2
lrwxrwxrwx 1 root root 10 Jan 16 10:58 usb-Generic_Flash_Disk_B29D99D4-0:0-part3 -> ../../sdd3
lrwxrwxrwx 1 root root 9 Jan 16 10:58 wwn-0x5000039fffc64b24 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 16 10:58 wwn-0x5000039fffc64b24-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 16 10:58 wwn-0x5000039fffc64b24-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 16 10:59 wwn-0x5000039fffc64b24-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Jan 16 10:58 wwn-0x50014ee659b21dbb -> ../../sdc
lrwxrwxrwx 1 root root 10 Jan 16 10:59 wwn-0x50014ee659b21dbb-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Jan 16 10:58 wwn-0x5001b44ee1b6de74 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 10:58 wwn-0x5001b44ee1b6de74-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 16 10:58 wwn-0x5001b44ee1b6de74-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 16 10:59 wwn-0x5001b44ee1b6de74-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 16 10:59 wwn-0x5001b44ee1b6de74-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdd1 /cdrom iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_BE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
linux /boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-163-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
menuentry 'Ubuntu, avec Linux 4.15.0-163-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-163-generic-advanced-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-163-generic…'
linux /boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-163-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-163-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-163-generic-recovery-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-163-generic…'
linux /boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro recovery nomodeset dis_ucode_ldr
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-163-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-162-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-162-generic-advanced-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-162-generic…'
linux /boot/vmlinuz-4.15.0-162-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-162-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-162-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-162-generic-recovery-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-162-generic…'
linux /boot/vmlinuz-4.15.0-162-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro recovery nomodeset dis_ucode_ldr
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-162-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-5EC017DEC017BAEB' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5EC017DEC017BAEB
else
search --no-floppy --fs-uuid --set=root 5EC017DEC017BAEB
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows Vista (sur /dev/sdb2)' --class windows --class os $menuentry_id_option 'osprober-chain-7C2688232687DD10' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 7C2688232687DD10
else
search --no-floppy --fs-uuid --set=root 7C2688232687DD10
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 / ext4 errors=remount-ro 0 1
UUID=520E-296B /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
42.126564026 = 45.233053696 boot/grub/grub.cfg 1
91.384334564 = 98.123182080 boot/grub/i386-pc/core.img 1
112.172908783 = 120.444743680 boot/vmlinuz-4.15.0-162-generic 2
44.477600098 = 47.757459456 boot/vmlinuz-4.15.0-163-generic 1
44.477600098 = 47.757459456 vmlinuz 1
112.172908783 = 120.444743680 vmlinuz.old 2
138.875972748 = 149.116940288 boot/initrd.img-4.15.0-162-generic 5
102.563392639 = 110.126604288 boot/initrd.img-4.15.0-163-generic 5
102.563392639 = 110.126604288 initrd.img 5
138.875972748 = 149.116940288 initrd.img.old 5
========================= sdb2/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# Created by generate-pxe-menu! Do NOT edit unless you know what you are doing!
# Keep those comment "MENU DEFAULT" and "MENU HIDE"! Do NOT remove them.
# Note!!! If "serial" directive exists, it must be the first directive
default /syslinux/menu.c32
timeout 300
prompt 0
noescape 1
MENU MARGIN 5
MENU BACKGROUND ocswp.png
# Set the color for unselected menu item and timout message
MENU COLOR UNSEL 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT_MSG 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT 7;32;41 #c0000090 #00000000
MENU COLOR HELP 7;32;41 #c0000090 #00000000
# MENU MASTER PASSWD
say **********************************************************************
say Clonezilla, the OpenSource Clone System.
say NCHC Free Software Labs, Taiwan.
say clonezilla.org, clonezilla.nchc.org.tw
say THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
say **********************************************************************
# Allow client to edit the parameters
ALLOWOPTIONS 1
# simple menu title
MENU TITLE clonezilla.org, clonezilla.nchc.org.tw
# Since no network setting in the squashfs image, therefore if ip=, the network is disabled. That's what we want.
label Clonezilla live
MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 800x600)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
* Boot menu for BIOS machine
* Clonezilla live version: 20141125-utopic-amd64. (C) 2003-2014, NCHC, Taiwan
* Disclaimer: Clonezilla comes with ABSOLUTELY NO WARRANTY
ENDTEXT
MENU BEGIN Other modes of Clonezilla live
label Clonezilla live 1024x768
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 1024x768)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=791 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
VGA mode 1024x768. OK for most of VGA cards.
ENDTEXT
label Clonezilla live 640x480
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 640x480)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=785 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
VGA mode 640x480. OK for most of VGA cards.
ENDTEXT
label Clonezilla live KMS
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, KMS)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=791 ip= splash
TEXT HELP
KMS mode. OK for ATI, Intel and NVIDIA VGA cards.
ENDTEXT
label Clonezilla live (To RAM)
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (To RAM. Boot media can be removed later)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 toram=filesystem.squashfs ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
All the programs will be copied to RAM, so you can
remove boot media (CD or USB flash drive) later
ENDTEXT
label Clonezilla live without framebuffer
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Safe graphic settings, vga=normal)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no ip= nomodeset vga=normal nosplash
TEXT HELP
Disable console frame buffer support
ENDTEXT
label Clonezilla live failsafe mode
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Failsafe mode)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no acpi=off irqpoll noapic noapm nodma nomce nolapic nosmp ip= nomodeset vga=normal nosplash
TEXT HELP
acpi=off irqpoll noapic noapm nodma nomce nolapic
nosmp nomodeset vga=normal nosplash
ENDTEXT
MENU END
label local
# MENU DEFAULT
# MENU HIDE
MENU LABEL Local operating system in harddrive (if available)
# MENU PASSWD
# 2 method to boot local device:
# (1) For localboot 0, it is decided by boot order in BIOS, so uncomment the follow 1 line if you want this method:
# localboot 0
# (2) For chain.c32, you can assign the boot device.
# Ref: extlinux.doc from syslinux
# Syntax: APPEND [hd|fd]<number> [<partition>]
# [<partition>] is optional.
# Ex:
# Second partition (2) on the first hard disk (hd0);
# Linux would *typically* call this /dev/hda2 or /dev/sda2, then it's "APPEND hd0 2"
#
kernel chain.c32
append hd0
TEXT HELP
Boot local OS from first hard disk if it's available
ENDTEXT
MENU BEGIN Memtest & FreeDOS
# Note! *.bin is specially purpose for syslinux,
# Do NOT use memtest.bin, use memtest instead of memtest.bin
label memtest
# MENU DEFAULT
# MENU HIDE
MENU LABEL Memory test using Memtest86+
# MENU PASSWD
kernel /live/memtest
TEXT HELP
Run memory test using Memtest86+
ENDTEXT
label FreeDOS
# MENU DEFAULT
# MENU HIDE
MENU LABEL FreeDOS
# MENU PASSWD
kernel memdisk
append initrd=/live/freedos.img
TEXT HELP
Run FreeDOS
ENDTEXT
MENU END
label iPXE
# MENU DEFAULT
# MENU HIDE
MENU LABEL Network boot via iPXE
# MENU PASSWD
kernel /live/ipxe.lkn
TEXT HELP
Run iPXE to enable network (PXE) boot
ENDTEXT
MENU END
--------------------------------------------------------------------------------
================= sdb2: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
323.521907806 = 347.379003392 syslinux/syslinux.cfg 1
323.470577240 = 347.323887616 syslinux/chain.c32 1
323.521595001 = 347.378667520 syslinux/ldlinux.c32 1
323.521770477 = 347.378855936 syslinux/libcom32.c32 1
323.470699310 = 347.324018688 syslinux/libutil.c32 1
323.521850586 = 347.378941952 syslinux/menu.c32 1
323.521934509 = 347.379032064 syslinux/vesamenu.c32 1
============== sdb2: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : not a COM32/COM32R module
=========================== sdd1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Start Linux Mint 20 Cinnamon 64-bit" --class linuxmint {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} quiet splash --
initrd /casper/initrd.lz
}
menuentry "Start Linux Mint 20 Cinnamon 64-bit (compatibility mode)" {
linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} noapic noacpi nosplash irqpoll nomodeset --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed oem-config/enable=true only-ubiquity boot=casper iso-scan/filename=${iso_path} quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check the integrity of the medium" {
linux /casper/vmlinuz boot=casper integrity-check iso-scan/filename=${iso_path} quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
=================== sdd1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown MBR on /dev/sdd
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 88 21 00 00 00 00 00 00 9b a3 89 40 00 00 80 00 |.!.........@....|
000001c0 01 00 00 76 e0 f9 00 00 00 00 c0 26 3b 00 00 fe |...v.......&;...|
000001d0 ff ff ef fe ff ff 88 02 00 00 00 1f 00 00 00 73 |...............s|
000001e0 03 f1 83 0f fc d3 00 30 3b 00 00 d0 b4 00 00 00 |.......0;.......|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
/dev/sda1: unknown GPT attributes
8000000000000000
/dev/sda2: unknown GPT attributes
8000000000000000
/dev/sda4: unknown GPT attributes
8000000000000001
/dev/sdd1: unknown GPT attributes
1000000000000001
/dev/sdd2: unknown GPT attributes
1000000000000001
Unknown BootLoader on sdd1
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 88 21 00 00 00 00 00 00 9b a3 89 40 00 00 80 00 |.!.........@....|
000001c0 01 00 00 76 e0 f9 00 00 00 00 c0 26 3b 00 00 fe |...v.......&;...|
000001d0 ff ff ef fe ff ff 88 02 00 00 00 1f 00 00 00 73 |...............s|
000001e0 03 f1 83 0f fc d3 00 30 3b 00 00 d0 b4 00 00 00 |.......0;.......|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sde
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/4317/mountinfo) leaked on lvs invocation. Parent PID 23050: bash
/dev/sde: open failed: No medium found
/dev/sde: open failed: No medium found
ADDITIONAL INFORMATION :
=================== log of boot-info 20220116_1058 ===================
boot-info version : 4ppa78
boot-sav version : 4ppa78
boot-sav-extra version : 4ppa78
glade2script version : 3.2.4~ppa6
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
boot-info is executed in live-session (Linux Mint 20, ulyana, Linuxmint, x86_64)
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 39 bits physical, 48 bits virtual
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename= quiet splash --
ls: cannot access '/home/usr/.config': No such file or directory
NTFS signature is missing.
Failed to mount '/dev/sdd3': Invalid argument
The device '/dev/sdd3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sdd3 : Error code 12
mount -r /dev/sdd3 /mnt/boot-sav/sdd3
NTFS signature is missing.
Failed to mount '/dev/sdd3': Invalid argument
The device '/dev/sdd3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sdd3 : Error code 12
=================== os-prober:
/dev/nvme0n1p1:Ubuntu 18.04.6 LTS (18.04):Ubuntu:linux
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sdb1:Ubuntu 18.04.6 LTS (18.04):Ubuntu1:linux
=================== blkid:
/dev/nvme0n1p1: UUID="9e404df2-7ba5-4306-a171-912a6f5814f5" TYPE="ext4" PTTYPE="dos" PARTUUID="44b32ced-01"
/dev/nvme0n1p2: UUID="720731E15319FF48" TYPE="ntfs" PTTYPE="dos" PARTUUID="44b32ced-02"
/dev/nvme0n1p3: UUID="720731E15319FF48" TYPE="ntfs" PTTYPE="dos" PARTUUID="44b32ced-03"
/dev/sda1: UUID="520E-296B" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="e9b4c171-a67b-473c-844d-ca7d1b604fb6"
/dev/sda3: UUID="8CA40F38A40F23F4" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="0ddd0552-64c7-4eb2-9933-2379f6244c8a"
/dev/sda4: UUID="567099EC7099D2DB" TYPE="ntfs" PARTUUID="4b6cd196-2431-450c-8f87-c854dd9430d5"
/dev/sdb1: UUID="d4b24ad1-82ac-401e-82a2-9843bcdfd9d6" TYPE="ext4" PTTYPE="dos" PARTUUID="000e5446-01"
/dev/sdb2: UUID="d2689a15-377f-4ede-bb3e-eb635db42583" TYPE="ext4" PARTUUID="000e5446-02"
/dev/sdb3: UUID="3E6406A50CD98978" TYPE="ntfs" PARTUUID="000e5446-03"
/dev/sdc1: UUID="9AACFB38ACFB0D8F" TYPE="ntfs" PARTUUID="f810ea0c-01"
/dev/sdd1: UUID="2020-06-24-19-01-47-00" LABEL="Linux Mint 20 Cinnamon 64-bit" TYPE="iso9660" PTUUID="4089a39b" PTTYPE="dos" PARTUUID="4089a39b-01"
/dev/loop0: TYPE="squashfs"
/dev/sdd2: SEC_TYPE="msdos" UUID="1AC3-20ED" TYPE="vfat" PARTUUID="4089a39b-02"
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="f3bdebb6-4441-4fa9-bdba-4b7111e21db4"
/dev/sdd3: PARTUUID="4089a39b-03"
3 disks with OS, 3 OS : 2 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
NTFS signature is missing.
Failed to mount '/dev/sdd3': Invalid argument
The device '/dev/sdd3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sdd3 : Error code 12
mount -r /dev/sdd3 /mnt/boot-sav/sdd3
NTFS signature is missing.
Failed to mount '/dev/sdd3': Invalid argument
The device '/dev/sdd3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sdd3 : Error code 12
Windows not detected by os-prober on sda3.
dd: invalid number: ‘0’
Warning: /var/log/boot-info/20220116_105833/sdd/current_mbr.img could not be created. Please report this message to boot.repair@gmail.com
=================== nvme0n1p1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 31 2021 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Aug 24 2020 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12808 Aug 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 Aug 24 2020 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Aug 24 2020 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== nvme0n1p1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
=================== sdb1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 31 2021 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Aug 24 2020 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12808 Aug 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 Aug 24 2020 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Aug 24 2020 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== sdb1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb1: UUID=520E-296B (sda1)
Presence of EFI/Boot file detected: /mnt/boot-sav/sdd2/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sdd2/EFI/Boot/grubx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sdd2/EFI/Boot/mmx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: line 195: warning: command substitution: ignored null byte in input
Please install package efibootmgr and retry.
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
nvme0n1p1 : nvme0n1, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p1.
nvme0n1p2 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p2.
nvme0n1p3 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p3.
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda3.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda4.
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-maybe-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdb3 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb3.
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdc1.
sdd2 : sdd, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdd2.
sdd3 : sdd, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdd3.
nvme0n1 : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-maybe-EFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdd : not-GPT, BIOSboot-not-needed, has-correctEFI, usb-disk, not-mmc, no-os, 0 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:4096:gpt:ATA SanDisk SD7SB3Q-:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:127GB:127GB:ntfs:Basic data partition:msftdata;
4:127GB:128GB:548MB:ntfs::hidden, diag;
BYT;
/dev/sdb:500GB:scsi:512:4096:msdos:ATA TOSHIBA DT01ACA0:;
1:1049kB:158GB:158GB:ext4::boot;
2:158GB:368GB:210GB:ext4::;
3:368GB:500GB:132GB:ntfs::;
BYT;
/dev/sdc:320GB:scsi:512:512:msdos:ATA WDC WD3200BEKX-7:;
1:1049kB:320GB:320GB:ntfs::boot;
BYT;
/dev/sdd:8053MB:scsi:512:512:unknown:Generic Flash Disk:;
BYT;
/dev/nvme0n1:1000GB:nvme:512:512:msdos:WDC WDS100T2B0C:;
1:1049kB:232GB:232GB:ext4::boot;
2:232GB:378GB:146GB:ntfs::;
3:378GB:1000GB:622GB:ntfs::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
sda disk 119.2G
sda1 part vfat 100M
sda2 part 16M
sda3 part ntfs 118.6G
sda4 part ntfs 523M
sdb disk 465.8G
sdb1 part ext4 147.2G
sdb2 part ext4 195.3G
sdb3 part ntfs 123.3G
sdc disk 298.1G
sdc1 part ntfs 298.1G
sdd disk iso9660 7.5G Linux Mint 20 Cinnamon 64-bit
sdd1 part iso9660 1.9G Linux Mint 20 Cinnamon 64-bit
sdd2 part vfat 3.9M
sdd3 part 5.7G
sr0 rom 1024M
nvme0n1 disk 931.5G
nvme0n1p1 part ext4 216.1G
nvme0n1p2 part ntfs 135.9G
nvme0n1p3 part ntfs 579.5G
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0
sda3 0 0 0 /mnt/boot-sav/sda3
sda4 0 0 0 /mnt/boot-sav/sda4
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0 /mnt/boot-sav/sdb3
sdc 1 0 0 running
sdc1 1 0 0 /mnt/boot-sav/sdc1
sdd 1 0 1 running
sdd1 1 0 1 /cdrom
sdd2 1 0 1 /mnt/boot-sav/sdd2
sdd3 1 0 1
sr0 1 0 1 running
nvme0n1 0 0 0 live
nvme0n1p1 0 0 0 /mnt/boot-sav/nvme0n1p1
nvme0n1p2 0 0 0 /mnt/boot-sav/nvme0n1p2
nvme0n1p3 0 0 0 /mnt/boot-sav/nvme0n1p3
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,noexec,relatime,size=3974496k,nr_inodes=993624,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=804004k,mode=755)
/dev/sdd1 on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=/filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
none on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=18163)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=804000k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/nvme0n1p1 on /mnt/boot-sav/nvme0n1p1 type ext4 (rw,relatime,stripe=32738)
/dev/nvme0n1p2 on /mnt/boot-sav/nvme0n1p2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/nvme0n1p3 on /mnt/boot-sav/nvme0n1p3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,stripe=32738)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime)
/dev/sdb3 on /mnt/boot-sav/sdb3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdd2 on /mnt/boot-sav/sdd2 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=================== ls:
/sys/block/nvme0n1 (filtered): alignment_offset bdi capability dev device discard_alignment eui events events_async events_poll_msecs ext_range hidden holders inflight integrity lightnvm mq nguid nsid nvme0n1p1 nvme0n1p2 nvme0n1p3 power queue range removable ro size slaves stat subsystem trace uevent uuid wwid
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdd1 sdd2 sdd3 size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg lightnvm log mapper mcelog mei0 mem mqueue net null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 nvme0n1p3 port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sdb3 sdc sdc1 sdd sdd1 sdd2 sdd3 sde sg0 sg1 sg2 sg3 sg4 sg5 shm snapshot snd sr0 stderr stdin stdout tpm0 udmabuf uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero zfs
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/nvme0n1p2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 20 00 40 00 00 98 03 1b |........ .@.....|
00000020 00 00 00 00 80 00 80 00 ff 9f fd 10 00 00 00 00 |................|
00000030 04 00 00 00 00 00 00 00 ff d9 0f 01 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 48 ff 19 53 e1 31 07 72 |........H..S.1.r|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/nvme0n1p3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 20 00 40 00 00 38 01 2c |........ .@..8.,|
00000020 00 00 00 00 80 00 80 00 ff 2f 6f 48 00 00 00 00 |........./oH....|
00000030 04 00 00 00 00 00 00 00 ff f2 86 04 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 48 ff 19 53 e1 31 07 72 |........H..S.1.r|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 02 fe 19 |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 20 03 00 01 03 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 6b 29 0e 52 4e 4f 20 4e 41 4d 45 20 20 |..)k).RNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 45 72 |..............Er|
000001b0 72 2e 20 64 69 73 71 75 65 ff 0d 0a 50 72 65 73 |r. disque...Pres|
000001c0 73 65 7a 20 75 6e 65 20 74 6f 75 63 68 65 20 70 |sez une touche p|
000001d0 6f 75 72 20 72 65 64 82 6d 61 72 72 65 72 0d 0a |our red.marrer..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 ba 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 03 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 61 b5 d3 0e 00 00 00 00 |........a.......|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 f4 23 0f a4 38 0f a4 8c |.........#..8...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 60 d7 0e |........?....`..|
00000020 00 00 00 00 80 00 80 00 ff 57 10 00 00 00 00 00 |.........W......|
00000030 55 ae 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 db d2 99 70 ec 99 70 56 |...........p..pV|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 d0 cf 2a |........?......*|
00000020 00 00 00 00 80 00 80 00 ff 8f 68 0f 00 00 00 00 |..........h.....|
00000030 04 00 00 00 00 00 00 00 ff 88 f6 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 78 89 d9 0c a5 06 64 3e |........x.....d>|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff d7 42 25 00 00 00 00 |..........B%....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 8f 0d fb ac 38 fb ac 9a |............8...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdd2
00000000 eb 3c 90 6d 6b 66 73 2e 66 61 74 00 02 04 01 00 |.<.mkfs.fat.....|
00000010 02 00 02 00 1f f8 06 00 20 00 40 00 00 00 00 00 |........ .@.....|
00000020 00 00 00 00 80 01 29 ed 20 c3 1a 4e 4f 20 4e 41 |......). ..NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 32 20 20 20 0e 1f |ME FAT12 ..|
00000040 be 5b 7c ac 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 |.[|.".t.V.......|
00000050 5e eb f0 32 e4 cd 16 cd 19 eb fe 54 68 69 73 20 |^..2.......This |
00000060 69 73 20 6e 6f 74 20 61 20 62 6f 6f 74 61 62 6c |is not a bootabl|
00000070 65 20 64 69 73 6b 2e 20 20 50 6c 65 61 73 65 20 |e disk. Please |
00000080 69 6e 73 65 72 74 20 61 20 62 6f 6f 74 61 62 6c |insert a bootabl|
00000090 65 20 66 6c 6f 70 70 79 20 61 6e 64 0d 0a 70 72 |e floppy and..pr|
000000a0 65 73 73 20 61 6e 79 20 6b 65 79 20 74 6f 20 74 |ess any key to t|
000000b0 72 79 20 61 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 |ry again ... ...|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs tmpfs 786M 1.6M 784M 1% /run
/dev/sdd1 iso9660 1.9G 1.9G 0 100% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 3.9G 314M 3.6G 8% /
tmpfs tmpfs 3.9G 48M 3.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 504K 3.9G 1% /tmp
tmpfs tmpfs 786M 36K 786M 1% /run/user/999
/dev/nvme0n1p1 ext4 213G 107G 96G 53% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p2 fuseblk 136G 17G 120G 12% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p3 fuseblk 580G 75G 506G 13% /mnt/boot-sav/nvme0n1p3
/dev/sda1 vfat 96M 27M 70M 28% /mnt/boot-sav/sda1
/dev/sda3 fuseblk 119G 30G 90G 25% /mnt/boot-sav/sda3
/dev/sda4 fuseblk 523M 435M 89M 84% /mnt/boot-sav/sda4
/dev/sdb1 ext4 145G 111G 28G 81% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 193G 153G 30G 84% /mnt/boot-sav/sdb2
/dev/sdb3 fuseblk 124G 77G 47G 63% /mnt/boot-sav/sdb3
/dev/sdc1 fuseblk 299G 99M 298G 1% /mnt/boot-sav/sdc1
/dev/sdd2 vfat 3.9M 3.9M 10K 100% /mnt/boot-sav/sdd2
=================== fdisk -l:
Disk /dev/loop0: 1.75 GiB, 1863593984 bytes, 3639832 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/nvme0n1: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WDS100T2B0C
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x44b32ced
Device Boot Start End Sectors Size Id Type
/dev/nvme0n1p1 * 2048 453220351 453218304 216.1G 83 Linux
/dev/nvme0n1p2 453220352 738277375 285057024 135.9G 7 HPFS/NTFS/exFAT
/dev/nvme0n1p3 738277376 1953523711 1215246336 579.5G 7 HPFS/NTFS/exFAT
Disk /dev/sda: 119.25 GiB, 128035676160 bytes, 250069680 sectors
Disk model: SanDisk SD7SB3Q-
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 9EADD9A7-A013-414B-830C-4D0883EB4760
Device Start End Sectors Size Type
/dev/sda1 2048 206847 204800 100M EFI System
/dev/sda2 206848 239615 32768 16M Microsoft reserved
/dev/sda3 239616 248995169 248755554 118.6G Microsoft basic data
/dev/sda4 248995840 250066943 1071104 523M Windows recovery environment
Disk /dev/sdb: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk model: TOSHIBA DT01ACA0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x000e5446
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 308662204 308660157 147.2G 83 Linux
/dev/sdb2 308662272 718262271 409600000 195.3G 83 Linux
/dev/sdb3 718262272 976773119 258510848 123.3G 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 298.9 GiB, 320072933376 bytes, 625142448 sectors
Disk model: WDC WD3200BEKX-7
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xf810ea0c
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 2048 625139711 625137664 298.1G 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 7.51 GiB, 8053063680 bytes, 15728640 sectors
Disk model: Flash Disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x4089a39b
Device Boot Start End Sectors Size Id Type
/dev/sdd1 * 0 3876543 3876544 1.9G 0 Empty
/dev/sdd2 648 8583 7936 3.9M ef EFI (FAT-12/16/32)
/dev/sdd3 3878912 15728639 11849728 5.7G 83 Linux
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi-amd64-signed of nvme0n1p1, using the following options: sdd2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdd2/efi/.../grub*.efi file!
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
pastebinit packages needed
E: The repository 'cdrom://Linux Mint 20 _Ulyana_ - Release amd64 20200624 focal Release' does not have a Release file.
W: GPG error: http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu focal InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 32B18A1260D8DA0B
E: The repository 'http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu focal InRelease' is not signed.
paste2.org ko ()
On peut voir que cette version de boot-info est plutot ancienne :
Boot Info Script 71f6c5c + Boot-Repair extra info [Boot-Info 16mar2020]
il est dommage de ne pas en fournir un a jour .
Dernière modification par iznobe (Le 16/01/2022, à 12:09)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#44 Le 16/01/2022, à 12:17
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
Ben je viens de le faire je ne comprend pas cette date
Hors ligne
#45 Le 16/01/2022, à 14:24
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
Bon ben c'est raté , j'ai fait la réinstallation et maintenant au démarrage j'ai GRUB avec un tiret qui clignote , une idée ?
Hors ligne
#46 Le 16/01/2022, à 14:28
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
tu as procédé a la reinstallation complete du systeme ? et ca demarre pas
Dernière modification par iznobe (Le 16/01/2022, à 14:29)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#47 Le 16/01/2022, à 14:39
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
j'ai fais la procédure : réinstaller tout le système sans toucher au /Home et quand je redémarre j'ai un écran noir avec GRUB et un tiret qui clignote
Essayer un boot repair ?
Dernière modification par Henri56 (Le 16/01/2022, à 14:41)
Hors ligne
#48 Le 16/01/2022, à 14:44
- iznobe
Re : pc ne demarre plus besoin d un specialiste du Grub
il faudrait que tu refasses la manip que j ' ai donné dans un message precedent : a savoir demarrer sur la clé USB et passer la commande suivante et donner le lien du nouveau boot-info .
Pour selectionner la ligne entiere faire triple clic gauche dessus , puis copier et coller dans le terminal de la session live USB .
sudo add-apt-repository -y ppa:yannubuntu/boot-repair ; sudo apt update ; sudo apt install -y boot-info ; boot-info
faire une reparation automatique sans analyser la situation et sans savoir si c' est adequat , peut faire empirer les choses au lieu de les arranger .
Dernière modification par iznobe (Le 16/01/2022, à 14:45)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#49 Le 16/01/2022, à 14:47
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
ok a tout de suite
Hors ligne
#50 Le 16/01/2022, à 14:53
- Henri56
Re : pc ne demarre plus besoin d un specialiste du Grub
Hors ligne