[ Résolu ] Son strident et aigu Carte son Intel ES8316

Dariox743 · Le 05/03/2022, à 13:28

Bonjour,

J'ai installer Ubuntu 21.10 il y a quelque jours et quand j'essaye de mettre de la musique sur Ubuntu, un son aigu et horrible sort de mon ordinateur, je ne sais pas a quoi cela est dû ? Pouvez vous m'aider ?

En attente d'une réponse,

Cordialement,

Dariox743

Dernière modification par bruno (Le 25/03/2022, à 12:55)

xubu1957 · Le 05/03/2022, à 13:31

Bonjour,

Tu pourrais regarder dans > TUTO Problèmes de sons sous Ubuntu

==============

Nota : notre Modération a scindé le fil (de 2012) > [Résolu] Problème de son - Son aigu hauts-parleurs

Dernière modification par xubu1957 (Le 05/03/2022, à 14:59)

Dariox743 · Le 05/03/2022, à 14:37

Rebonjour,

Après plusieurs heures de recherche sur le lien que vous m'aviez donner j'ai fait toute les consignes puis j'ai reboot mon ordinateur puis j'ai essayer de remettre de la musique puis il y a toujours ce bruit aigu et horrible. Y'a t'il autre chose pour ma config ?

Processeur : Intel® Atom™ x5-Z8350 CPU @ 1.44GHz
Nombre de cœur du processeur : 4
Carte graphique : Intel® HD Graphics
Système d'exploitation : Ubuntu 21.10 64bits
Version de GNOME : 40.4.0

En attente d'une autre réponse,

Cordialement,

Dariox743

Dernière modification par Dariox743 (Le 05/03/2022, à 14:55)

xubu1957 · Le 05/03/2022, à 15:21

C'est un modèle thomson-neo14a-4bk64 ?

Montre :

lsmod | grep snd

Voir la réponse de Nuliel

Dernière modification par xubu1957 (Le 05/03/2022, à 15:23)

Dariox743 · Le 05/03/2022, à 15:26

dario@neo10a-4bk64:~$ lsmod | grep snd
snd_soc_sst_byt_cht_es8316    24576  2
snd_hdmi_lpe_audio     28672  1
snd_sof_acpi_intel_byt    28672  0
snd_sof_intel_ipc      20480  1 snd_sof_acpi_intel_byt
snd_sof_acpi           20480  1 snd_sof_acpi_intel_byt
snd_sof_xtensa_dsp     16384  1 snd_sof_acpi_intel_byt
snd_sof               135168  3 snd_sof_acpi,snd_sof_acpi_intel_byt,snd_sof_intel_ipc
ledtrig_audio          16384  1 snd_sof
snd_intel_sst_acpi     20480  0
snd_soc_acpi_intel_match    49152  2 snd_sof_acpi_intel_byt,snd_intel_sst_acpi
snd_soc_acpi           16384  3 snd_soc_acpi_intel_match,snd_sof_acpi_intel_byt,snd_intel_sst_acpi
snd_intel_sst_core     61440  1 snd_intel_sst_acpi
snd_soc_sst_atom_hifi2_platform   110592  1 snd_intel_sst_core
snd_intel_dspcfg       28672  2 snd_sof_acpi_intel_byt,snd_intel_sst_acpi
snd_soc_es8316         49152  1
snd_intel_sdw_acpi     20480  1 snd_intel_dspcfg
snd_soc_core          294912  4 snd_soc_sst_byt_cht_es8316,snd_sof,snd_soc_sst_atom_hifi2_platform,snd_soc_es8316
snd_compress           28672  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_seq_midi           20480  0
snd_pcm               118784  9 snd_soc_sst_byt_cht_es8316,snd_sof,snd_sof_intel_ipc,snd_compress,snd_hdmi_lpe_audio,snd_soc_sst_atom_hifi2_platform,snd_soc_core,snd_soc_es8316,snd_pcm_dmaengine
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            36864  1 snd_seq_midi
snd_seq                73728  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer              40960  2 snd_seq,snd_pcm
snd                    94208  16 snd_soc_sst_byt_cht_es8316,snd_seq,snd_seq_device,snd_timer,snd_compress,snd_hdmi_lpe_audio,snd_soc_sst_atom_hifi2_platform,snd_soc_core,snd_pcm,snd_rawmidi
soundcore              16384  1 snd
dario@neo10a-4bk64:~$

Dernière modification par Dariox743 (Le 05/03/2022, à 19:10)

xubu1957 · Le 05/03/2022, à 15:37

Vu le module :

snd_soc_sst_byt_cht_es8316

et ce fil > aucune carte son ou chipset audio actif sur Thomson NEO14

Je vais essayer d'obtenir l'aide de Nuliel.

Dariox743 · Le 05/03/2022, à 15:40

Je le colle où le module suivant ? :

snd_soc_sst_byt_cht_es8316

xubu1957 · Le 05/03/2022, à 15:41

Nulle part, c'est pas facile à gérer sur du Linux.

Dariox743 · Le 05/03/2022, à 15:49

Du coup je dois faire comment car j'ai toujours le problème de son aigu et horrible ?

xubu1957 · Le 05/03/2022, à 15:51

Il faudra attendre que Nuliel vienne sur ta discussion.

Dariox743 · Le 05/03/2022, à 16:14

D'accord, j’espère que le problème sera résolu assez vite car, je suis débutant sur Linux.

Dernière modification par Dariox743 (Le 05/03/2022, à 16:16)

xubu1957 · Le 05/03/2022, à 16:29

Montre :

dmesg | grep 8316

repris dans la longue discussion > Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1

_ _ _

(edit=messages regroupés)
_ _ _

Au #4, Dariox743 a écrit :

Ce code est privé, code supprimé !
Ce code a déjà été reçu par un membre au nom de xubu1957.

Je vois que tu as supprimé les retours.

Mon aide est terminée sur cette discussion !

Dernière modification par xubu1957 (Le 05/03/2022, à 19:17)

Nuliel · Le 05/03/2022, à 18:28

Je ne vais pas non plus prendre du temps à t'aider vu ton comportement.

Nuliel · Le 05/03/2022, à 18:36

Le principe d'un forum, c'est le partage. Des gens prennent sur leur temps personnel et de manière bénévole pour aider d'autres personnes, et que cela serve à d'autres qui rencontreraient le même problème. Si tu détruis tes messages comme ça, c'est que tu es contre le partage, et je vois pas ce que tu fais sur un forum.

Dernière modification par Nuliel (Le 05/03/2022, à 18:36)

xubu1957 · Le 05/03/2022, à 18:36

Pour info :

Le 29/03/2018, moko138 a écrit :

Un retour complet doit contenir toutes les lignes,
depuis celle, entière, de la commande
jusqu'à la ligne attendant la commande suivante, exemple :
moi@mon-pc~$: ma-commande
son retour
moi@mon-pc~$:
Faute de quoi, il manque souvent à ceux qui tentent de t'aider des éléments essentiels.
(Plus de détails dans ce message-ci Retour utilisable de commande.)
Et si tu ne veux pas divulguer ton nom d'user, tu le remplaces par "toto" ou ce que tu veux.

Dariox743 · Le 05/03/2022, à 18:46

Nuliel a écrit :

Le principe d'un forum, c'est le partage. Des gens prennent sur leur temps personnel et de manière bénévole pour aider d'autres personnes, et que cela serve à d'autres qui rencontreraient le même problème. Si tu détruis tes messages comme ça, c'est que tu es contre le partage, et je vois pas ce que tu fais sur un forum.

D'accord alors je suis prêt à remettre du code venant du terminal pour vous aider à trouver le problème, pour m'aider et pour aider les autres.

Nuliel · Le 05/03/2022, à 18:54

Bon, je te laisse commencer par rétablir les messages 4 et 6.

xubu1957 · Le 05/03/2022, à 19:11

Fournis les cartes son :

lspci | grep [Aa]udio && lsusb | grep [Aa]udio

cat /proc/asound/pcm

d'éventuels paquets cassés :

dpkg -l | grep -v ^ii

et :

ls -l /var/crash

Dariox743 · Le 05/03/2022, à 19:19

xubu1957 a écrit :

Fournis les cartes son :
lspci | grep [Aa]udio && lsusb | grep [Aa]udio
cat /proc/asound/pcm
d'éventuels paquets cassés :
dpkg -l | grep -v ^ii
et :
ls -l /var/crash

Merci.

Sudo apt update :

dario@neo10a-4bk64:~$ sudo apt update
[sudo] Mot de passe de dario : 
Atteint :1 http://fr.archive.ubuntu.com/ubuntu impish InRelease
Réception de :2 http://fr.archive.ubuntu.com/ubuntu impish-updates InRelease [110 kB]
Atteint :3 https://dl.google.com/linux/chrome/deb stable InRelease             
Réception de :4 http://security.ubuntu.com/ubuntu impish-security InRelease [110 kB]
Réception de :5 http://fr.archive.ubuntu.com/ubuntu impish-backports InRelease [101 kB]
Réception de :6 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 DEP-11 Metadata [25,7 kB]
Réception de :7 http://fr.archive.ubuntu.com/ubuntu impish-updates/universe amd64 DEP-11 Metadata [21,6 kB]
Réception de :8 http://fr.archive.ubuntu.com/ubuntu impish-backports/universe amd64 DEP-11 Metadata [16,5 kB]
Réception de :9 https://repo.protonvpn.com/debian stable InRelease [2519 B]   
Réception de :10 http://security.ubuntu.com/ubuntu impish-security/main amd64 DEP-11 Metadata [11,7 kB]
Err :9 https://repo.protonvpn.com/debian stable InRelease
  Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY 71EB474019940E11
Réception de :11 http://security.ubuntu.com/ubuntu impish-security/universe amd64 DEP-11 Metadata [2608 B]
400 ko réceptionnés en 3s (140 ko/s)             
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Tous les paquets sont à jour.
dario@neo10a-4bk64:~$

lspci | grep [Aa]udio && lsusb | grep [Aa]udio :

dario@neo10a-4bk64:~$ lspci | grep [Aa]udio && lsusb | grep [Aa]udio
dario@neo10a-4bk64:~$

cat /proc/asound/pcm :

dario@neo10a-4bk64:~$ cat /proc/asound/pcm
00-00: HdmiLpeAudio : Intel HDMI/DP LPE Audi : playback 1
00-01: HdmiLpeAudio : Intel HDMI/DP LPE Audi : playback 1
00-02: HdmiLpeAudio : Intel HDMI/DP LPE Audi : playback 1
01-00: PCM (*) :  : playback 1 : capture 1
01-01: PCM Deep Buffer (*) :  : playback 1
dario@neo10a-4bk64:~$

dpkg -l | grep -v ^ii :

dario@neo10a-4bk64:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                                    Architecture Description
+++-==========================================-==========================================-============-===============================================================================
rc  javascript-common                          11+nmu1                                    all          Base support for JavaScript library packages
rc  libjs-jquery                               3.5.1+dfsg+~3.5.5-7                        all          JavaScript library for dynamic web applications
rc  libopenal-data                             1:1.19.1-2                                 all          Software implementation of the OpenAL audio API (data files)
rc  libreoffice-base-core                      1:7.2.1-0ubuntu3                           amd64        office productivity suite -- shared library
rc  libreoffice-calc                           1:7.2.1-0ubuntu3                           amd64        office productivity suite -- spreadsheet
rc  libreoffice-draw                           1:7.2.1-0ubuntu3                           amd64        office productivity suite -- drawing
rc  libreoffice-impress                        1:7.2.1-0ubuntu3                           amd64        office productivity suite -- presentation
rc  libreoffice-writer                         1:7.2.1-0ubuntu3                           amd64        office productivity suite -- word processor
rc  libvdpau1:amd64                            1.4-3build1                                amd64        Video Decode and Presentation API for Unix (libraries)
rc  protonvpn-stable-release                   1.0.1-1                                    all          Package to install ProtonVPN GPG key and stable repo
dario@neo10a-4bk64:~$

ls -l /var/crash :

dario@neo10a-4bk64:~$ ls -l /var/crash
total 6224
-rw-r----- 1 gdm   whoopsie 1724181 mars   4 15:15 _usr_bin_Xwayland.126.crash
-rw-r----- 1 dario whoopsie 4647818 mars   5 15:42 _usr_libexec_xdg-desktop-portal-gtk.1000.crash
dario@neo10a-4bk64:~$

Nuliel · Le 05/03/2022, à 19:42

Est ce que tu peux essayer avec des écouteurs pour voir si tu as le même problème?
Tu peux donner

pactl list short sinks
pactl list short cards

? Cela permettra de voir la vision de pulseaudio.
Le retour de cat /proc/asound/pcm est assez surprenant. As tu suivi des tutos ou autre chose pour avoir du son, ou tu as ce son aigu depuis l'installation? Je demande car avant sur ce genre de pc le son ne fonctionnait simplement pas (ou avec beaucoup d'efforts)
À noter que tu as deux rapports de crash, normalement sans lien avec le son.

xubu1957 · Le 05/03/2022, à 19:49

@Nuliel

sudo dmesg | grep -i sdio

(rajout sudo, version > 20.04) serait-il utile ?

> Pas de son ni de wifi Debian 10

Dernière modification par xubu1957 (Le 05/03/2022, à 19:51)

Dariox743 · Le 05/03/2022, à 19:51

Nuliel a écrit :

Est ce que tu peux essayer avec des écouteurs pour voir si tu as le même problème?
Tu peux donner
pactl list short sinks
pactl list short cards
? Cela permettra de voir la vision de pulseaudio.
Le retour de cat /proc/asound/pcm est assez surprenant. As tu suivi des tutos ou autre chose pour avoir du son, ou tu as ce son aigu depuis l'installation? Je demande car avant sur ce genre de pc le son ne fonctionnait simplement pas (ou avec beaucoup d'efforts)
À noter que tu as deux rapports de crash, normalement sans lien avec le son.

J'ai essayer avec des écouteurs il n'y a pas très longtemps de ça et le bruit apparais aussi dans mes écouteurs. Donc pour répondre a ta question le son strident y été déjà a l'installation d'Ubuntu.

pactl list short sinks :

dario@neo10a-4bk64:~$ pactl list short sinks
1	alsa_output.platform-bytcht_es8316.HiFi__hw_es8316__sink	module-alsa-card.c	s16le 2ch 48000Hz	SUSPENDED
dario@neo10a-4bk64:~$

pactl list short cards :

dario@neo10a-4bk64:~$ pactl list short cards
0	alsa_card.pci-0000_00_02.0-platform-hdmi-lpe-audio	module-alsa-card.c
1	alsa_card.platform-bytcht_es8316	module-alsa-card.c
dario@neo10a-4bk64:~$

Nuliel · Le 05/03/2022, à 19:51

Ouep, voire

dmesg

entier (les messages d'erreur ne contiennent pas forcément sdio), à faire après un redémarrage pour éviter que le retour soit ultra long (c'est déjà long de base)

Dariox743 · Le 05/03/2022, à 19:54

xubu1957 a écrit :

@Nuliel
sudo dmesg | grep -i sdio
(rajout sudo, version > 20.04) serait-il utile ?
> Pas de son ni de wifi Debian 10

dario@neo10a-4bk64:~$ dmesg | grep -i sdio
dmesg: échec de lecture du tampon de noyau: Opération non permise
dario@neo10a-4bk64:~$ sudo dmesg | grep -i sdio
[sudo] Mot de passe de dario : 
[    3.683613] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    7.566126] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    7.636060] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.THOMSON-NEO10A-4BK64.txt failed with error -2
[    7.638253] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.txt failed with error -2
[    9.755546] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
dario@neo10a-4bk64:~$

Dariox743 · Le 05/03/2022, à 19:57

Nuliel a écrit :

Ouep, voire
dmesg
entier (les messages d'erreur ne contiennent pas forcément sdio), à faire après un redémarrage pour éviter que le retour soit ultra long (c'est déjà long de base)

dario@neo10a-4bk64:~$ dmesg
dmesg: échec de lecture du tampon de noyau: Opération non permise
dario@neo10a-4bk64:~$ sudo dmesg
[sudo] Mot de passe de dario : 
[    0.000000] microcode: microcode updated early to revision 0x411, date = 2019-04-23
[    0.000000] Linux version 5.13.0-30-generic (buildd@lcy02-amd64-032) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #33-Ubuntu SMP Fri Feb 4 17:03:31 UTC 2022 (Ubuntu 5.13.0-30.33-generic 5.13.19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-30-generic root=UUID=e87a0712-5104-42d6-9017-14f8c98e39d3 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007a9f5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a9f6000-0x000000007b405fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b406000-0x000000007b43afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007b43b000-0x000000007b535fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b536000-0x000000007b87afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b87b000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi: ESRT=0x7b404000 ACPI=0x7b418000 ACPI 2.0=0x7b418000 SMBIOS=0x7b6f3000 SMBIOS 3.0=0x7b6f2000 RNG=0x7b6f4d18 TPMEventLog=0x77296018 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: fast init done
[    0.000000] TPM Final Events table not present
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: THOMSON NEO10A-4BK64/C116CM, BIOS 5.11 11/09/2020
[    0.000000] tsc: Detected 1440.000 MHz processor
[    0.000051] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000064] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000090] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000164] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000504] total RAM covered: 4036M
[    0.001731] Found optimal setting for mtrr clean up
[    0.001735]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.001906] e820: update [mem 0x7c400000-0xffffffff] usable ==> reserved
[    0.001923] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.012112] esrt: ESRT header is not in the memory map.
[    0.013468] secureboot: Secure boot disabled
[    0.013472] RAMDISK: [mem 0x3d6fb000-0x3fffdfff]
[    0.013495] ACPI: Early table checksum verification disabled
[    0.013508] ACPI: RSDP 0x000000007B418000 000024 (v02 ALASKA)
[    0.013525] ACPI: XSDT 0x000000007B4180B0 0000DC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013548] ACPI: FACP 0x000000007B433C70 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.013568] ACPI: DSDT 0x000000007B418218 01BA52 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.013584] ACPI: FACS 0x000000007B535F80 000040
[    0.013596] ACPI: APIC 0x000000007B433D80 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.013608] ACPI: FPDT 0x000000007B433E08 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013620] ACPI: FIDT 0x000000007B433E50 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013632] ACPI: MSDM 0x000000007B433EF0 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.013644] ACPI: MCFG 0x000000007B433F48 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.013656] ACPI: SSDT 0x000000007B433F88 0041C7 (v01 DptfTb DptfTab  00001000 INTL 20120913)
[    0.013669] ACPI: SSDT 0x000000007B438150 000645 (v01 CpuDpf CpuDptf  00001000 INTL 20120913)
[    0.013683] ACPI: SSDT 0x000000007B438798 000058 (v01 LowPM  LowPwrM  00001000 INTL 20120913)
[    0.013695] ACPI: UEFI 0x000000007B4387F0 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.013707] ACPI: SSDT 0x000000007B438838 000269 (v01 UsbCTb UsbCTab  00001000 INTL 20120913)
[    0.013719] ACPI: HPET 0x000000007B438AA8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.013733] ACPI: SSDT 0x000000007B438AE0 000763 (v01 PmRef  CpuPm    00003000 INTL 20120913)
[    0.013746] ACPI: SSDT 0x000000007B439248 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.013759] ACPI: SSDT 0x000000007B4394D8 00017A (v01 PmRef  ApTst    00003000 INTL 20120913)
[    0.013774] ACPI: SSDT 0x000000007B439658 00043A (v01 Intel_ Tpm2Tabl 00001000 INTL 20120913)
[    0.013788] ACPI: TPM2 0x000000007B439A98 000034 (v03                 00000000      00000000)
[    0.013800] ACPI: LPIT 0x000000007B439AD0 000104 (v01 ALASKA A M I    00000005 MSFT 0100000D)
[    0.013814] ACPI: BCFG 0x000000007B439BD8 000139 (v01 INTEL  BATTCONF 00000001 ACPI 00000000)
[    0.013827] ACPI: PRAM 0x000000007B439D18 000030 (v01                 00000001      00000000)
[    0.013839] ACPI: CSRT 0x000000007B439D48 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
[    0.013851] ACPI: BGRT 0x000000007B439E98 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013863] ACPI: WDAT 0x000000007B439ED0 000104 (v01                 00000000      00000000)
[    0.013873] ACPI: Reserving FACP table memory at [mem 0x7b433c70-0x7b433d7b]
[    0.013879] ACPI: Reserving DSDT table memory at [mem 0x7b418218-0x7b433c69]
[    0.013883] ACPI: Reserving FACS table memory at [mem 0x7b535f80-0x7b535fbf]
[    0.013888] ACPI: Reserving APIC table memory at [mem 0x7b433d80-0x7b433e03]
[    0.013892] ACPI: Reserving FPDT table memory at [mem 0x7b433e08-0x7b433e4b]
[    0.013896] ACPI: Reserving FIDT table memory at [mem 0x7b433e50-0x7b433eeb]
[    0.013900] ACPI: Reserving MSDM table memory at [mem 0x7b433ef0-0x7b433f44]
[    0.013904] ACPI: Reserving MCFG table memory at [mem 0x7b433f48-0x7b433f83]
[    0.013908] ACPI: Reserving SSDT table memory at [mem 0x7b433f88-0x7b43814e]
[    0.013912] ACPI: Reserving SSDT table memory at [mem 0x7b438150-0x7b438794]
[    0.013917] ACPI: Reserving SSDT table memory at [mem 0x7b438798-0x7b4387ef]
[    0.013921] ACPI: Reserving UEFI table memory at [mem 0x7b4387f0-0x7b438831]
[    0.013925] ACPI: Reserving SSDT table memory at [mem 0x7b438838-0x7b438aa0]
[    0.013929] ACPI: Reserving HPET table memory at [mem 0x7b438aa8-0x7b438adf]
[    0.013934] ACPI: Reserving SSDT table memory at [mem 0x7b438ae0-0x7b439242]
[    0.013938] ACPI: Reserving SSDT table memory at [mem 0x7b439248-0x7b4394d7]
[    0.013942] ACPI: Reserving SSDT table memory at [mem 0x7b4394d8-0x7b439651]
[    0.013946] ACPI: Reserving SSDT table memory at [mem 0x7b439658-0x7b439a91]
[    0.013951] ACPI: Reserving TPM2 table memory at [mem 0x7b439a98-0x7b439acb]
[    0.013955] ACPI: Reserving LPIT table memory at [mem 0x7b439ad0-0x7b439bd3]
[    0.013959] ACPI: Reserving BCFG table memory at [mem 0x7b439bd8-0x7b439d10]
[    0.013964] ACPI: Reserving PRAM table memory at [mem 0x7b439d18-0x7b439d47]
[    0.013968] ACPI: Reserving CSRT table memory at [mem 0x7b439d48-0x7b439e93]
[    0.013972] ACPI: Reserving BGRT table memory at [mem 0x7b439e98-0x7b439ecf]
[    0.013977] ACPI: Reserving WDAT table memory at [mem 0x7b439ed0-0x7b439fd3]
[    0.014003] ACPI: Local APIC address 0xfee00000
[    0.014137] No NUMA configuration found
[    0.014141] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.014177] NODE_DATA(0) allocated [mem 0x17ffd4000-0x17fffdfff]
[    0.015341] Zone ranges:
[    0.015346]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015354]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015359]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.015367]   Device   empty
[    0.015371] Movable zone start for each node
[    0.015378] Early memory node ranges
[    0.015382]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.015389]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.015393]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.015398]   node   0: [mem 0x0000000020200000-0x000000007a9f5fff]
[    0.015402]   node   0: [mem 0x000000007b87b000-0x000000007bffffff]
[    0.015406]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.015414] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.015422] On node 0 totalpages: 1027863
[    0.015428]   DMA zone: 64 pages used for memmap
[    0.015431]   DMA zone: 156 pages reserved
[    0.015435]   DMA zone: 3996 pages, LIFO batch:0
[    0.015440]   DMA32 zone: 7806 pages used for memmap
[    0.015443]   DMA32 zone: 499579 pages, LIFO batch:63
[    0.015446]   Normal zone: 8192 pages used for memmap
[    0.015449]   Normal zone: 524288 pages, LIFO batch:63
[    0.015458] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.015463] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.015560] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.028926] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.029115] On node 0, zone DMA32: 3717 pages in unavailable ranges
[    0.043815] On node 0, zone Normal: 16384 pages in unavailable ranges
[    0.043841] Reserving Intel graphics memory at [mem 0x7ce00000-0x7edfffff]
[    0.043950] ACPI: PM-Timer IO Port: 0x408
[    0.043962] ACPI: Local APIC address 0xfee00000
[    0.043985] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.043993] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.043997] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.044000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.044028] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.044040] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.044048] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.044054] ACPI: IRQ0 used by override.
[    0.044058] ACPI: IRQ9 used by override.
[    0.044068] Using ACPI (MADT) for SMP configuration information
[    0.044072] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.044100] e820: update [mem 0x7945a000-0x7961cfff] usable ==> reserved
[    0.044140] TSC deadline timer available
[    0.044146] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.044279] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.044290] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.044298] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.044302] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.044309] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.044316] PM: hibernation: Registered nosave memory: [mem 0x7945a000-0x7961cfff]
[    0.044324] PM: hibernation: Registered nosave memory: [mem 0x7a9f6000-0x7b405fff]
[    0.044329] PM: hibernation: Registered nosave memory: [mem 0x7b406000-0x7b43afff]
[    0.044332] PM: hibernation: Registered nosave memory: [mem 0x7b43b000-0x7b535fff]
[    0.044336] PM: hibernation: Registered nosave memory: [mem 0x7b536000-0x7b87afff]
[    0.044343] PM: hibernation: Registered nosave memory: [mem 0x7c000000-0x7cdfffff]
[    0.044346] PM: hibernation: Registered nosave memory: [mem 0x7ce00000-0x7edfffff]
[    0.044350] PM: hibernation: Registered nosave memory: [mem 0x7ee00000-0xdfffffff]
[    0.044353] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.044356] PM: hibernation: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[    0.044360] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.044363] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.044366] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.044370] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.044373] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.044376] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.044379] PM: hibernation: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.044383] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
[    0.044386] PM: hibernation: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
[    0.044389] PM: hibernation: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
[    0.044392] PM: hibernation: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.044396] PM: hibernation: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.044399] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.044402] PM: hibernation: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.044405] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.044408] PM: hibernation: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.044412] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.044415] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.044418] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.044425] [mem 0x7ee00000-0xdfffffff] available for PCI devices
[    0.044430] Booting paravirtualized kernel on bare hardware
[    0.044439] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.044467] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.045786] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288
[    0.045820] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152
[    0.045832] pcpu-alloc: [0] 0 1 2 3 
[    0.045958] Built 1 zonelists, mobility grouping on.  Total pages: 1011645
[    0.045968] Policy zone: Normal
[    0.045973] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-30-generic root=UUID=e87a0712-5104-42d6-9017-14f8c98e39d3 ro quiet splash vt.handoff=7
[    0.047803] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.048667] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.048787] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.114692] Memory: 3826724K/4111452K available (16393K kernel code, 3511K rwdata, 10512K rodata, 2896K init, 5728K bss, 284468K reserved, 0K cma-reserved)
[    0.114714] random: get_random_u64 called from kmem_cache_open+0x25/0x2f0 with crng_init=1
[    0.115179] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.115229] Kernel/User page tables isolation: enabled
[    0.115282] ftrace: allocating 49744 entries in 195 pages
[    0.153417] ftrace: allocated 195 pages with 4 groups
[    0.153818] rcu: Hierarchical RCU implementation.
[    0.153825] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.153830] 	Rude variant of Tasks RCU enabled.
[    0.153832] 	Tracing variant of Tasks RCU enabled.
[    0.153836] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.153840] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.170839] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.171459] random: crng done (trusting CPU's manufacturer)
[    0.171545] vt handoff: transparent VT on vt#7
[    0.171567] Console: colour dummy device 80x25
[    0.171627] printk: console [tty0] enabled
[    0.171701] ACPI: Core revision 20210331
[    0.172250] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.172256] APIC: Switch to symmetric I/O mode setup
[    0.173726] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
[    0.173747] Calibrating delay loop (skipped), value calculated using timer frequency.. 2880.00 BogoMIPS (lpj=5760000)
[    0.173757] pid_max: default: 32768 minimum: 301
[    0.177740] LSM: Security Framework initializing
[    0.177740] Yama: becoming mindful.
[    0.177740] AppArmor: AppArmor initialized
[    0.177740] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.177740] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.177740] CPU0: Thermal monitoring enabled (TM1)
[    0.177740] process: using mwait in idle threads
[    0.177740] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.177740] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.177740] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.177740] Spectre V2 : Mitigation: Full generic retpoline
[    0.177740] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.177740] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.177740] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.177740] MDS: Mitigation: Clear CPU buffers
[    0.177740] Freeing SMP alternatives memory: 40K
[    0.177740] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1365
[    0.177740] smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350  CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.177740] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.177740] ... version:                3
[    0.177740] ... bit width:              40
[    0.177740] ... generic registers:      2
[    0.177740] ... value mask:             000000ffffffffff
[    0.177740] ... max period:             0000007fffffffff
[    0.177740] ... fixed-purpose events:   3
[    0.177740] ... event mask:             0000000700000003
[    0.177740] rcu: Hierarchical SRCU implementation.
[    0.177740] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.177740] smp: Bringing up secondary CPUs ...
[    0.177740] x86: Booting SMP configuration:
[    0.177740] .... node  #0, CPUs:      #1 #2 #3
[    0.186399] smp: Brought up 1 node, 4 CPUs
[    0.186399] smpboot: Max logical packages: 1
[    0.186399] smpboot: Total of 4 processors activated (11520.00 BogoMIPS)
[    0.187101] devtmpfs: initialized
[    0.187101] x86/mm: Memory block size: 128MB
[    0.190443] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.190443] PM: Registering ACPI NVS region [mem 0x7b43b000-0x7b535fff] (1028096 bytes)
[    0.190443] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.190443] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.190443] pinctrl core: initialized pinctrl subsystem
[    0.190640] PM: RTC time: 17:56:38, date: 2022-03-05
[    0.191090] NET: Registered protocol family 16
[    0.191586] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.191786] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.192009] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.192059] audit: initializing netlink subsys (disabled)
[    0.192134] audit: type=2000 audit(1646502998.016:1): state=initialized audit_enabled=0 res=1
[    0.192134] thermal_sys: Registered thermal governor 'fair_share'
[    0.192134] thermal_sys: Registered thermal governor 'bang_bang'
[    0.192134] thermal_sys: Registered thermal governor 'step_wise'
[    0.192134] thermal_sys: Registered thermal governor 'user_space'
[    0.192134] thermal_sys: Registered thermal governor 'power_allocator'
[    0.192134] EISA bus registered
[    0.193809] cpuidle: using governor ladder
[    0.193830] cpuidle: using governor menu
[    0.193981] ACPI: bus type PCI registered
[    0.193988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.194277] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.194295] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.194302] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[    0.194346] PCI: Using configuration type 1 for base access
[    0.195056] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.199953] Kprobes globally optimized
[    0.199974] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.206100] ACPI: Added _OSI(Module Device)
[    0.206107] ACPI: Added _OSI(Processor Device)
[    0.206111] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.206114] ACPI: Added _OSI(Processor Aggregator Device)
[    0.206118] ACPI: Added _OSI(Linux-Dell-Video)
[    0.206122] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.206125] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.291480] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.305993] ACPI: Dynamic OEM Table Load:
[    0.306029] ACPI: SSDT 0xFFFF9FC68098B800 00059C (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.311453] ACPI: Dynamic OEM Table Load:
[    0.311479] ACPI: SSDT 0xFFFF9FC6809E9C00 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.316710] ACPI: Dynamic OEM Table Load:
[    0.316735] ACPI: SSDT 0xFFFF9FC680C18E00 00015F (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.320682] ACPI: Dynamic OEM Table Load:
[    0.320706] ACPI: SSDT 0xFFFF9FC680BCA9C0 00008D (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.331530] ACPI: Interpreter enabled
[    0.331602] ACPI: (supports S0 S4 S5)
[    0.331610] ACPI: Using IOAPIC for interrupt routing
[    0.331752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.337064] ACPI: PM: Power Resource [P06X] (off)
[    0.339992] ACPI: PM: Power Resource [ID3C] (on)
[    0.344303] ACPI: PM: Power Resource [USBC] (on)
[    0.345627] ACPI: PM: Power Resource [WWPR] (off)
[    0.346623] ACPI: PM: Power Resource [WWPR] (off)
[    0.348326] ACPI: PM: Power Resource [WWPR] (off)
[    0.349215] ACPI: PM: Power Resource [WWPR] (off)
[    0.350147] ACPI: PM: Power Resource [WWPR] (off)
[    0.351212] ACPI: PM: Power Resource [WWPR] (off)
[    0.367585] ACPI: PM: Power Resource [CLK2] (on)
[    0.371385] ACPI: PM: Power Resource [CLK2] (on)
[    0.371559] ACPI: PM: Power Resource [CLK3] (on)
[    0.371721] ACPI: PM: Power Resource [CLK4] (on)
[    0.387517] ACPI: PM: Power Resource [CLK2] (on)
[    0.387679] ACPI: PM: Power Resource [CLK1] (on)
[    0.389201] ACPI: PM: Power Resource [CLK5] (off)
[    0.406837] ACPI: PM: Power Resource [P28X] (off)
[    0.406997] ACPI: PM: Power Resource [P18X] (off)
[    0.407160] ACPI: PM: Power Resource [P12X] (off)
[    0.407325] ACPI: PM: Power Resource [P28P] (off)
[    0.407478] ACPI: PM: Power Resource [P18P] (off)
[    0.407645] ACPI: PM: Power Resource [P12P] (off)
[    0.407827] ACPI: PM: Power Resource [P19X] (off)
[    0.408006] ACPI: PM: Power Resource [P12A] (off)
[    0.408169] ACPI: PM: Power Resource [P28T] (off)
[    0.408327] ACPI: PM: Power Resource [P18D] (off)
[    0.408490] ACPI: PM: Power Resource [P18T] (off)
[    0.408664] ACPI: PM: Power Resource [P3P3] (off)
[    0.408827] ACPI: PM: Power Resource [P12T] (off)
[    0.408996] ACPI: PM: Power Resource [P28W] (off)
[    0.409152] ACPI: PM: Power Resource [P18W] (off)
[    0.409320] ACPI: PM: Power Resource [P12W] (off)
[    0.409475] ACPI: PM: Power Resource [P33W] (off)
[    0.409640] ACPI: PM: Power Resource [P33X] (off)
[    0.409809] ACPI: PM: Power Resource [P4BW] (off)
[    0.420560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.420589] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.421961] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.422006] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.424550] PCI host bridge to bus 0000:00
[    0.424562] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.424571] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.424576] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.424582] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.424587] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.424592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.424598] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
[    0.424605] pci_bus 0000:00: root bus resource [mem 0x7ce00001-0x7ee00000 window]
[    0.424610] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.424651] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.425562] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
[    0.425596] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.425614] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.425626] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.425669] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.426252] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
[    0.426274] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff]
[    0.426875] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.426899] pci 0000:00:0b.0: reg 0x10: [mem 0x9183b000-0x9183bfff 64bit]
[    0.427588] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.427626] pci 0000:00:14.0: reg 0x10: [mem 0x91800000-0x9180ffff 64bit]
[    0.427746] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.428585] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.428614] pci 0000:00:1a.0: reg 0x10: [mem 0x91700000-0x917fffff]
[    0.428631] pci 0000:00:1a.0: reg 0x14: [mem 0x91600000-0x916fffff]
[    0.428743] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.429402] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.449968] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.449979] ACPI: PCI: Interrupt link LNKA disabled
[    0.450325] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.450332] ACPI: PCI: Interrupt link LNKB disabled
[    0.450678] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.450684] ACPI: PCI: Interrupt link LNKC disabled
[    0.451036] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.451042] ACPI: PCI: Interrupt link LNKD disabled
[    0.451384] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.451391] ACPI: PCI: Interrupt link LNKE disabled
[    0.451732] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.451739] ACPI: PCI: Interrupt link LNKF disabled
[    0.452075] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.452082] ACPI: PCI: Interrupt link LNKG disabled
[    0.452424] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.452431] ACPI: PCI: Interrupt link LNKH disabled
[    0.458554] cherryview-pinctrl: probe of INT33FF:04 failed with error -61
[    0.471837] ACPI: PM: Power Resource [CLK0] (on)
[    0.472014] ACPI: PM: Power Resource [CLK1] (on)
[    0.499193] acpi LNXPOWER:10: Turning OFF
[    0.499276] acpi LNXPOWER:11: Turning OFF
[    0.499340] acpi LNXPOWER:24: Turning OFF
[    0.499423] acpi LNXPOWER:23: Turning OFF
[    0.499498] acpi LNXPOWER:22: Turning OFF
[    0.499570] acpi LNXPOWER:21: Turning OFF
[    0.499771] acpi LNXPOWER:20: Turning OFF
[    0.499872] acpi LNXPOWER:1f: Turning OFF
[    0.499937] acpi LNXPOWER:1e: Turning OFF
[    0.500003] acpi LNXPOWER:1d: Turning OFF
[    0.500068] acpi LNXPOWER:1c: Turning OFF
[    0.500137] acpi LNXPOWER:1b: Turning OFF
[    0.500204] acpi LNXPOWER:1a: Turning OFF
[    0.500268] acpi LNXPOWER:19: Turning OFF
[    0.500331] acpi LNXPOWER:18: Turning OFF
[    0.500395] acpi LNXPOWER:17: Turning OFF
[    0.500462] acpi LNXPOWER:16: Turning OFF
[    0.500529] acpi LNXPOWER:15: Turning OFF
[    0.500596] acpi LNXPOWER:14: Turning OFF
[    0.500662] acpi LNXPOWER:13: Turning OFF
[    0.500726] acpi LNXPOWER:12: Turning OFF
[    0.500790] acpi LNXPOWER:0f: Turning OFF
[    0.500873] acpi LNXPOWER:0e: Turning OFF
[    0.500949] acpi LNXPOWER:0d: Turning OFF
[    0.501027] acpi LNXPOWER:0c: Turning OFF
[    0.501107] acpi LNXPOWER:0a: Turning OFF
[    0.501185] acpi LNXPOWER:09: Turning OFF
[    0.501267] acpi LNXPOWER:01: Turning OFF
[    0.501779] iommu: Default domain type: Translated 
[    0.502472] SCSI subsystem initialized
[    0.502501] libata version 3.00 loaded.
[    0.502501] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.502501] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.502501] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.502501] vgaarb: loaded
[    0.502501] ACPI: bus type USB registered
[    0.502501] usbcore: registered new interface driver usbfs
[    0.502501] usbcore: registered new interface driver hub
[    0.502501] usbcore: registered new device driver usb
[    0.797800] pps_core: LinuxPPS API ver. 1 registered
[    0.797809] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.797823] PTP clock support registered
[    0.797896] EDAC MC: Ver: 3.0.0
[    0.797932] Registered efivars operations
[    0.798255] NetLabel: Initializing
[    0.798260] NetLabel:  domain hash size = 128
[    0.798263] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.798314] NetLabel:  unlabeled traffic allowed by default
[    0.798376] PCI: Using ACPI for IRQ routing
[    0.802176] PCI: pci_cache_line_size set to 64 bytes
[    0.802225] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.802232] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.802240] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.802245] e820: reserve RAM buffer [mem 0x7945a000-0x7bffffff]
[    0.802250] e820: reserve RAM buffer [mem 0x7a9f6000-0x7bffffff]
[    0.804707] clocksource: Switched to clocksource tsc-early
[    0.847536] VFS: Disk quotas dquot_6.6.0
[    0.847587] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.847982] AppArmor: AppArmor Filesystem Enabled
[    0.848169] pnp: PnP ACPI init
[    0.848699] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.848712] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.848718] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.848744] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.849053] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.862492] system 00:02: [mem 0x91839000-0x91839fff] has been reserved
[    0.862507] system 00:02: [mem 0x91837000-0x91837fff] has been reserved
[    0.862514] system 00:02: [mem 0x91835000-0x91835fff] has been reserved
[    0.862520] system 00:02: [mem 0x91824000-0x91824fff] has been reserved
[    0.862526] system 00:02: [mem 0x91822000-0x91822fff] has been reserved
[    0.862532] system 00:02: [mem 0x91820000-0x91820fff] has been reserved
[    0.862537] system 00:02: [mem 0x9181e000-0x9181efff] has been reserved
[    0.862543] system 00:02: [mem 0x9181c000-0x9181cfff] has been reserved
[    0.862549] system 00:02: [mem 0x9181a000-0x9181afff] has been reserved
[    0.862555] system 00:02: [mem 0x91818000-0x91818fff] has been reserved
[    0.862561] system 00:02: [mem 0x91833000-0x91833fff] has been reserved
[    0.862567] system 00:02: [mem 0x91831000-0x91831fff] has been reserved
[    0.862573] system 00:02: [mem 0x9182f000-0x9182ffff] has been reserved
[    0.862579] system 00:02: [mem 0x9182d000-0x9182dfff] has been reserved
[    0.862585] system 00:02: [mem 0x9182b000-0x9182bfff] has been reserved
[    0.862591] system 00:02: [mem 0x91829000-0x91829fff] has been reserved
[    0.862596] system 00:02: [mem 0x91827000-0x91827fff] has been reserved
[    0.862602] system 00:02: [mem 0x91825000-0x91825fff] has been reserved
[    0.862629] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.862905] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.862914] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.862920] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.862926] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.862932] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.862937] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.862944] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    0.862950] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.862956] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.862975] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.863759] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.867261] pnp: PnP ACPI: found 5 devices
[    0.878570] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.878792] NET: Registered protocol family 2
[    0.879056] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.881650] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.881826] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.882201] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.882422] TCP: Hash tables configured (established 32768 bind 32768)
[    0.882678] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.882779] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.882857] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.883049] NET: Registered protocol family 1
[    0.883069] NET: Registered protocol family 44
[    0.883097] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.883108] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.883114] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.883119] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.883125] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
[    0.883131] pci_bus 0000:00: resource 9 [mem 0x20000000-0x201fffff window]
[    0.883137] pci_bus 0000:00: resource 10 [mem 0x7ce00001-0x7ee00000 window]
[    0.883142] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.883795] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.884442] PCI: CLS 64 bytes, default 64
[    0.884475] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.884480] software IO TLB: mapped [mem 0x0000000073295000-0x0000000077295000] (64MB)
[    0.884624] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
[    0.884680] clocksource: Switched to clocksource tsc
[    0.884727] Trying to unpack rootfs image as initramfs...
[    0.886228] Initialise system trusted keyrings
[    0.886286] Key type blacklist registered
[    0.886508] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.890641] zbud: loaded
[    0.891911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.892638] fuse: init (API version 7.34)
[    0.893350] integrity: Platform Keyring initialized
[    0.917952] Key type asymmetric registered
[    0.917964] Asymmetric key parser 'x509' registered
[    0.918013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.918135] io scheduler mq-deadline registered
[    0.926224] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.926466] efifb: probing for efifb
[    0.926523] efifb: showing boot graphics
[    0.932024] efifb: framebuffer at 0x80000000, using 2400k, total 2400k
[    0.932039] efifb: mode is 1024x600x32, linelength=4096, pages=1
[    0.932044] efifb: scrolling: redraw
[    0.932046] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.932242] fbcon: Deferring console take-over
[    0.932248] fb0: EFI VGA frame buffer device
[    0.933526] ACPI: AC: found native INT33F4 PMIC, not loading
[    0.933712] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.933826] ACPI: button: Power Button [PWRB]
[    0.933958] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.934033] ACPI: button: Lid Switch [LID0]
[    0.934156] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.934282] ACPI: button: Power Button [PWRF]
[    0.944393] thermal LNXTHERM:00: registered as thermal_zone0
[    0.944406] ACPI: thermal: Thermal Zone [TZ00] (0 C)
[    0.945400] ACPI: battery: found native INT33F4 PMIC, not loading
[    0.945457] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.966047] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.992921] hpet: number irqs doesn't agree with number of timers
[    0.993474] Linux agpgart interface v0.103
[    1.213951] loop: module loaded
[    1.215900] libphy: Fixed MDIO Bus: probed
[    1.215910] tun: Universal TUN/TAP device driver, 1.6
[    1.216404] PPP generic driver version 2.4.2
[    1.217373] VFIO - User Level meta-driver version: 0.3
[    1.218212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.218240] ehci-pci: EHCI PCI platform driver
[    1.218274] ehci-platform: EHCI generic platform driver
[    1.218311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.218320] ohci-pci: OHCI PCI platform driver
[    1.218344] ohci-platform: OHCI generic platform driver
[    1.218376] uhci_hcd: USB Universal Host Controller Interface driver
[    1.218514] i8042: PNP: No PS/2 controller found.
[    1.219522] mousedev: PS/2 mouse device common for all mice
[    1.221321] rtc_cmos 00:04: registered as rtc0
[    1.221526] rtc_cmos 00:04: setting system clock to 2022-03-05T17:56:39 UTC (1646502999)
[    1.221597] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    1.221635] i2c /dev entries driver
[    1.225219] device-mapper: uevent: version 1.0.3
[    1.225552] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    1.225656] platform eisa.0: Probing EISA bus 0
[    1.225666] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.225672] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.225677] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.225681] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.225686] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.225690] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.225695] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.225699] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.225703] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.225707] platform eisa.0: EISA: Detected 0 cards
[    1.225720] intel_pstate: Intel P-state driver initializing
[    1.230483] ledtrig-cpu: registered to indicate activity on CPUs
[    1.230500] EFI Variables Facility v0.08 2004-May-17
[    1.250412] drop_monitor: Initializing network drop monitor service
[    1.250879] NET: Registered protocol family 10
[    2.284766] Freeing initrd memory: 41996K
[    2.330252] Segment Routing with IPv6
[    2.330405] NET: Registered protocol family 17
[    2.331795] Key type dns_resolver registered
[    2.334701] microcode: sig=0x406c4, pf=0x1, revision=0x411
[    2.335764] microcode: Microcode Update Driver: v2.2.
[    2.335795] IPI shorthand broadcast: enabled
[    2.335917] sched_clock: Marking stable (2333299677, 2418637)->(2363339712, -27621398)
[    2.338869] registered taskstats version 1
[    2.338953] Loading compiled-in X.509 certificates
[    2.346799] Loaded X.509 cert 'Build time autogenerated kernel key: 3e79c7cae6aba4be389af1e475cd0b49c9e62fc4'
[    2.351663] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    2.356475] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    2.356489] blacklist: Loading compiled-in revocation X.509 certificates
[    2.356626] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    2.357459] zswap: loaded using pool lzo/zbud
[    2.360843] Key type ._fscrypt registered
[    2.360859] Key type .fscrypt registered
[    2.360867] Key type fscrypt-provisioning registered
[    2.361996] Key type trusted registered
[    2.373721] Key type encrypted registered
[    2.373803] AppArmor: AppArmor sha1 policy hashing enabled
[    2.377004] Loading compiled-in module X.509 certificates
[    2.381918] Loaded X.509 cert 'Build time autogenerated kernel key: 3e79c7cae6aba4be389af1e475cd0b49c9e62fc4'
[    2.381937] ima: Allocated hash algorithm: sha1
[    2.486393] ima: No architecture policies found
[    2.486505] evm: Initialising EVM extended attributes:
[    2.486518] evm: security.selinux
[    2.486528] evm: security.SMACK64
[    2.486535] evm: security.SMACK64EXEC
[    2.486548] evm: security.SMACK64TRANSMUTE
[    2.486552] evm: security.SMACK64MMAP
[    2.486557] evm: security.apparmor
[    2.486561] evm: security.ima
[    2.486564] evm: security.capability
[    2.486569] evm: HMAC attrs: 0x1
[    2.568305] i2c_designware 808622C1:05: I2C bus managed by PUNIT
[    2.594580] PM:   Magic number: 14:51:946
[    2.594685] tty tty3: hash matches
[    2.594845] processor cpu1: hash matches
[    2.597287] RAS: Correctable Errors collector initialized.
[    2.727805] Freeing unused decrypted memory: 2036K
[    2.730159] Freeing unused kernel image (initmem) memory: 2896K
[    2.730525] Write protecting the kernel read-only data: 30720k
[    2.733637] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    2.736137] Freeing unused kernel image (rodata/data gap) memory: 1776K
[    2.823815] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.824132] x86/mm: Checking user space page tables
[    2.899305] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.899324] Run /init as init process
[    2.899328]   with arguments:
[    2.899331]     /init
[    2.899333]     splash
[    2.899335]   with environment:
[    2.899337]     HOME=/
[    2.899339]     TERM=linux
[    2.899341]     BOOT_IMAGE=/boot/vmlinuz-5.13.0-30-generic
[    3.474229] sdhci: Secure Digital Host Controller Interface driver
[    3.474239] sdhci: Copyright(c) Pierre Ossman
[    3.493123] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.493170] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.494330] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    3.506847] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    3.509197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    3.509211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.509216] usb usb1: Product: xHCI Host Controller
[    3.509220] usb usb1: Manufacturer: Linux 5.13.0-30-generic xhci-hcd
[    3.509224] usb usb1: SerialNumber: 0000:00:14.0
[    3.510563] hub 1-0:1.0: USB hub found
[    3.510631] hub 1-0:1.0: 7 ports detected
[    3.514053] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.516786] mmc0: SDHCI controller on ACPI [80860F14:03] using ADMA
[    3.519813] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.519833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.519845] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    3.520049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[    3.520057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.520075] usb usb2: Product: xHCI Host Controller
[    3.520080] usb usb2: Manufacturer: Linux 5.13.0-30-generic xhci-hcd
[    3.520084] usb usb2: SerialNumber: 0000:00:14.0
[    3.520473] hub 2-0:1.0: USB hub found
[    3.520506] hub 2-0:1.0: 6 ports detected
[    3.521721] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    3.522435] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    3.553870] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    3.562295] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    3.580763] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.582330] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.584175] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.587180] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.590618] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    3.652074] mmc1: new HS200 MMC card at address 0001
[    3.663665] mmcblk1: mmc1:0001 SCA64G 57.7 GiB 
[    3.664040] mmcblk1boot0: mmc1:0001 SCA64G 4.00 MiB 
[    3.664341] mmcblk1boot1: mmc1:0001 SCA64G 4.00 MiB 
[    3.665132] mmcblk1rpmb: mmc1:0001 SCA64G 4.00 MiB, chardev (239:0)
[    3.677175]  mmcblk1: p1 p2 p3 p4 p5
[    3.683613] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    3.853792] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    4.006696] usb 1-1: New USB device found, idVendor=0000, idProduct=3825, bcdDevice= 1.00
[    4.006731] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.006750] usb 1-1: Product:  USB OPTICAL MOUSE
[    4.045372] fbcon: Taking over console
[    4.045590] Console: switching to colour frame buffer device 128x37
[    4.062174] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.137786] usb 1-3: new low-speed USB device number 3 using xhci_hcd
[    4.296437] usb 1-3: New USB device found, idVendor=6080, idProduct=0610, bcdDevice= 2.00
[    4.296472] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.296491] usb 1-3: Product: USB KEYBOARD
[    4.296504] usb 1-3: Manufacturer: SINO WEALTH
[    4.426543] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    4.539261] systemd[1]: Inserted module 'autofs4'
[    4.600672] usb 1-4: New USB device found, idVendor=0bdc, idProduct=0320, bcdDevice= 1.01
[    4.600707] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.600724] usb 1-4: Product: USB Camera
[    4.600737] usb 1-4: Manufacturer: MTD
[    4.600749] usb 1-4: SerialNumber: 20200618
[    4.721127] systemd[1]: systemd 248.3-1ubuntu8.2 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    4.738875] systemd[1]: Detected architecture x86-64.
[    4.740952] systemd[1]: Hostname set to <neo10a-4bk64>.
[    5.469568] systemd[1]: Queued start job for default target Graphical Interface.
[    5.474366] systemd[1]: Created slice system-modprobe.slice.
[    5.475555] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.476512] systemd[1]: Created slice User and Session Slice.
[    5.476823] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.477483] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.477692] systemd[1]: Reached target User and Group Name Lookups.
[    5.477797] systemd[1]: Reached target Remote File Systems.
[    5.477846] systemd[1]: Reached target Slices.
[    5.477951] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[    5.478468] systemd[1]: Listening on Syslog Socket.
[    5.478835] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.479027] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.479830] systemd[1]: Listening on Journal Audit Socket.
[    5.480224] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.480736] systemd[1]: Listening on Journal Socket.
[    5.481898] systemd[1]: Listening on udev Control Socket.
[    5.482355] systemd[1]: Listening on udev Kernel Socket.
[    5.485086] systemd[1]: Mounting Huge Pages File System...
[    5.488308] systemd[1]: Mounting POSIX Message Queue File System...
[    5.492250] systemd[1]: Mounting Kernel Debug File System...
[    5.496238] systemd[1]: Mounting Kernel Trace File System...
[    5.503058] systemd[1]: Starting Journal Service...
[    5.507544] systemd[1]: Starting Set the console keyboard layout...
[    5.511377] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    5.515367] systemd[1]: Starting Load Kernel Module configfs...
[    5.519429] systemd[1]: Starting Load Kernel Module drm...
[    5.523435] systemd[1]: Starting Load Kernel Module fuse...
[    5.525278] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.525481] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    5.530439] systemd[1]: Starting Load Kernel Modules...
[    5.534038] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.538048] systemd[1]: Starting Coldplug All udev Devices...
[    5.544214] systemd[1]: Starting Uncomplicated firewall...
[    5.575219] systemd[1]: Mounted Huge Pages File System.
[    5.575703] systemd[1]: Mounted POSIX Message Queue File System.
[    5.576118] systemd[1]: Mounted Kernel Debug File System.
[    5.576542] systemd[1]: Mounted Kernel Trace File System.
[    5.577810] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    5.579381] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    5.580257] systemd[1]: Finished Load Kernel Module configfs.
[    5.581549] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    5.582655] systemd[1]: Finished Load Kernel Module drm.
[    5.583942] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    5.584979] systemd[1]: Finished Load Kernel Module fuse.
[    5.586572] EXT4-fs (mmcblk1p5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    5.586624] systemd[1]: Finished Uncomplicated firewall.
[    5.591135] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.595073] systemd[1]: Activating swap /swapfile...
[    5.599216] systemd[1]: Mounting FUSE Control File System...
[    5.603745] systemd[1]: Mounting Kernel Configuration File System...
[    5.604165] lp: driver loaded but no devices found
[    5.606232] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.606580] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    5.610083] systemd[1]: Starting Load/Save Random Seed...
[    5.614566] systemd[1]: Starting Create System Users...
[    5.619620] systemd[1]: Mounted FUSE Control File System.
[    5.620504] ppdev: user-space parallel port driver
[    5.629158] systemd[1]: Mounted Kernel Configuration File System.
[    5.641849] Adding 886476k swap on /swapfile.  Priority:-2 extents:4 across:911052k SSFS
[    5.642285] systemd[1]: Activated swap /swapfile.
[    5.642508] systemd[1]: Reached target Swap.
[    5.647198] systemd[1]: Finished Load Kernel Modules.
[    5.649297] systemd[1]: Finished Load/Save Random Seed.
[    5.649930] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    5.653560] systemd[1]: Starting Apply Kernel Variables...
[    5.676280] systemd[1]: Finished Create System Users.
[    5.679857] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.725721] systemd[1]: Finished Apply Kernel Variables.
[    5.732100] systemd[1]: Finished Create Static Device Nodes in /dev.
[    5.737722] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    5.749585] systemd[1]: Started Journal Service.
[    5.772884] systemd-journald[269]: Received client request to flush runtime journal.
[    5.923629] loop0: detected capacity change from 0 to 8
[    5.945138] loop1: detected capacity change from 0 to 226912
[    5.962692] loop2: detected capacity change from 0 to 126752
[    5.998115] loop3: detected capacity change from 0 to 126632
[    6.026625] loop4: detected capacity change from 0 to 113680
[    6.027052] loop5: detected capacity change from 0 to 133552
[    6.050774] loop6: detected capacity change from 0 to 111080
[    6.051105] loop7: detected capacity change from 0 to 111048
[    6.141966] loop8: detected capacity change from 0 to 496320
[    6.213550] loop9: detected capacity change from 0 to 509456
[    6.753007] 8086228A:00: ttyS4 at MMIO 0x91821000 (irq = 39, base_baud = 2764800) is a 16550A
[    6.777586] serial serial0: tty port ttyS4 registered
[    6.787956] 8086228A:01: ttyS5 at MMIO 0x9181f000 (irq = 40, base_baud = 2764800) is a 16550A
[    6.998211] Bluetooth: Core ver 2.22
[    6.998274] NET: Registered protocol family 31
[    6.998279] Bluetooth: HCI device and connection manager initialized
[    6.998289] Bluetooth: HCI socket layer initialized
[    6.998295] Bluetooth: L2CAP socket layer initialized
[    6.998306] Bluetooth: SCO socket layer initialized
[    7.055136] mc: Linux media interface: v0.10
[    7.103849] videodev: Linux video capture interface: v2.00
[    7.154006] atomisp_gmin_platform: module is from the staging directory, the quality is unknown, you have been warned.
[    7.159056] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
[    7.201935] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[    7.214012] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.230537] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.232804] atomisp: module is from the staging directory, the quality is unknown, you have been warned.

[    7.258269] **********************************************************
[    7.258272] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    7.258274] **                                                      **
[    7.258276] ** trace_printk() being used. Allocating extra memory.  **
[    7.258277] **                                                      **
[    7.258279] ** This means that this is a DEBUG kernel and it is     **
[    7.258281] ** unsafe for production use.                           **
[    7.258283] **                                                      **
[    7.258284] ** If you see this message and you are not debugging    **
[    7.258286] ** the kernel, report this immediately to your vendor!  **
[    7.258288] **                                                      **
[    7.258289] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    7.258291] **********************************************************
[    7.265078] Bluetooth: HCI UART driver ver 2.3
[    7.265099] Bluetooth: HCI UART protocol H4 registered
[    7.265102] Bluetooth: HCI UART protocol BCSP registered
[    7.265176] Bluetooth: HCI UART protocol LL registered
[    7.265180] Bluetooth: HCI UART protocol ATH3K registered
[    7.265210] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    7.265444] Bluetooth: HCI UART protocol Intel registered
[    7.274394] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[    7.274498] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[    7.286104] Bluetooth: HCI UART protocol Broadcom registered
[    7.286149] Bluetooth: HCI UART protocol QCA registered
[    7.286153] Bluetooth: HCI UART protocol AG6XX registered
[    7.286178] Bluetooth: HCI UART protocol Marvell registered
[    7.293531] atomisp-isp2 0000:00:03.0: Support for Cherrytrail (ISP2401) was disabled at compile time
[    7.338195] hid: raw HID events driver (C) Jiri Kosina
[    7.367256] axp288_extcon axp288_extcon: controlling USB role based on Vbus presence
[    7.391100] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    7.391151] usbcore: registered new interface driver usbhid
[    7.391162] usbhid: USB HID core driver
[    7.395029] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    7.397529] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    7.407801] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    7.412470] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    7.472765] pstore: Using crash dump compression: deflate
[    7.472804] pstore: Registered efi as persistent store backend
[    7.519875] usb 1-4: Found UVC 1.00 device USB Camera (0bdc:0320)
[    7.528242] Bluetooth: hci0: BCM: failed to write clock (-56)
[    7.528265] Bluetooth: hci0: Failed to set baudrate
[    7.566126] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    7.566745] usbcore: registered new interface driver brcmfmac
[    7.576782] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input3
[    7.576980] usbcore: registered new interface driver uvcvideo
[    7.636060] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.THOMSON-NEO10A-4BK64.txt failed with error -2
[    7.638253] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.txt failed with error -2
[    7.640529] brcmfmac: brcmf_fw_nvram_from_efi: Using nvram EFI variable
[    7.644608] Bluetooth: hci0: BCM: chip id 107
[    7.646971] Bluetooth: hci0: BCM: features 0x2f
[    7.652268] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 16 -> VIRQ 135
[    7.669271] cryptd: max_cpu_qlen set to 1000
[    7.670515] Bluetooth: hci0: BCM4345C0
[    7.670531] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[    7.670713] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[    7.670723] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[    7.670727] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[    7.681569] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 17 -> VIRQ 136
[    7.727252] SSE version of gcm_enc/dec engaged.
[    7.782654] checking generic (80000000 258000) vs hw (90000000 1000000)
[    7.782668] checking generic (80000000 258000) vs hw (80000000 10000000)
[    7.782672] fb0: switching to inteldrmfb from EFI VGA
[    7.782981] Console: switching to colour dummy device 80x25
[    7.783092] i915 0000:00:02.0: vgaarb: deactivate vga console
[    7.814061] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 18 -> VIRQ 137
[    7.868421] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 19 -> VIRQ 138
[    7.873576] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.876168] i915 0000:00:02.0: [drm] Using SoC PWM for LCD backlight control
[    8.003876] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    8.009178] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.023547] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    8.044370] i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
[    8.122550] sof-audio-acpi-intel-byt 808622A8:00: Firmware info: version 1:6:0-e9637
[    8.122564] sof-audio-acpi-intel-byt 808622A8:00: Firmware: ABI 3:17:0 Kernel ABI 3:18:0
[    8.220227] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 24 -> VIRQ 143
[    8.264073] input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.1.auto/input/input5
[    8.264447] input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.2.auto/input/input6
[    8.310284] fbcon: i915drmfb (fb0) is primary device
[    8.310651] Console: switching to colour frame buffer device 128x37
[    8.310714] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    8.341377] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 25 -> VIRQ 144
[    8.457800] intel_rapl_common: Found RAPL domain package
[    8.457813] intel_rapl_common: Found RAPL domain core
[    8.671598] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0000:3825.0001/input/input7
[    8.686933] hid-generic 0003:0000:3825.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1/input0
[    8.687412] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:6080:0610.0002/input/input8
[    8.754269] hid-generic 0003:6080:0610.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-3/input0
[    8.757198] input: SINO WEALTH USB KEYBOARD Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:6080:0610.0003/input/input9
[    8.757515] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:6080:0610.0003/input/input10
[    8.814103] input: SINO WEALTH USB KEYBOARD Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:6080:0610.0003/input/input11
[    8.814306] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:6080:0610.0003/input/input12
[    8.814696] hid-generic 0003:6080:0610.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-3/input1
[    8.950267] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input13
[    8.950600] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input14
[    8.951219] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input15
[    8.955829] bytcht_es8316 bytcht_es8316: quirk IN1_MAP enabled
[    8.955841] bytcht_es8316 bytcht_es8316: quirk MONO_SPEAKER enabled
[    8.968207] sof-audio-acpi-intel-byt 808622A8:00: Topology: ABI 3:17:0 Kernel ABI 3:18:0
[    8.987126] sof-audio-acpi-intel-byt 808622A8:00: ASoC: Parent card not yet available, widget card binding deferred
[    9.075070] input: sof-bytcht es8316 Headset as /devices/pci0000:00/808622A8:00/bytcht_es8316/sound/card1/input16
[    9.755546] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    9.775708] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[   10.822032] audit: type=1400 audit(1646503009.099:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=694 comm="apparmor_parser"
[   10.825108] audit: type=1400 audit(1646503009.099:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=695 comm="apparmor_parser"
[   10.825128] audit: type=1400 audit(1646503009.099:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=695 comm="apparmor_parser"
[   10.849179] audit: type=1400 audit(1646503009.115:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=698 comm="apparmor_parser"
[   10.849206] audit: type=1400 audit(1646503009.115:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=698 comm="apparmor_parser"
[   10.849218] audit: type=1400 audit(1646503009.115:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=698 comm="apparmor_parser"
[   10.850975] audit: type=1400 audit(1646503009.127:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=699 comm="apparmor_parser"
[   10.867862] audit: type=1400 audit(1646503009.143:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=696 comm="apparmor_parser"
[   10.867882] audit: type=1400 audit(1646503009.143:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=696 comm="apparmor_parser"
[   10.867894] audit: type=1400 audit(1646503009.143:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=696 comm="apparmor_parser"
[   12.024354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.024370] Bluetooth: BNEP filters: protocol multicast
[   12.024384] Bluetooth: BNEP socket layer initialized
[   12.086262] NET: Registered protocol family 38
[   14.650320] loop10: detected capacity change from 0 to 8
[   19.324848] rfkill: input handler disabled
[  141.661662] rfkill: input handler enabled
[  142.957114] Bluetooth: RFCOMM TTY layer initialized
[  142.957136] Bluetooth: RFCOMM socket layer initialized
[  142.957157] Bluetooth: RFCOMM ver 1.11
[  148.356617] rfkill: input handler disabled
[  148.921657] kauditd_printk_skb: 28 callbacks suppressed
[  148.921669] audit: type=1400 audit(1646503147.195:40): apparmor="DENIED" operation="capable" profile="/snap/core/12725/usr/lib/snapd/snap-confine" pid=1786 comm="snap-confine" capability=12  capname="net_admin"
[  148.921691] audit: type=1400 audit(1646503147.195:41): apparmor="DENIED" operation="capable" profile="/snap/core/12725/usr/lib/snapd/snap-confine" pid=1786 comm="snap-confine" capability=38  capname="perfmon"
[  148.988458] audit: type=1400 audit(1646503147.263:42): apparmor="DENIED" operation="capable" profile="/snap/core/12725/usr/lib/snapd/snap-confine" pid=1786 comm="snap-confine" capability=4  capname="fsetid"
[  152.969990] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[  152.970045] No Local Variables are initialized for Method [_TMP]

[  152.970051] No Arguments are initialized for method [_TMP]

[  152.970063] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[  155.581713] audit: type=1326 audit(1646503153.855:43): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=1786 comm="snap-store" exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f81311e789d code=0x50000
[  160.819596] audit: type=1107 audit(1646503159.095:44): pid=738 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=1786 label="snap.snap-store.ubuntu-software" peer_pid=750 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  160.821474] audit: type=1107 audit(1646503159.095:45): pid=738 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=1786 label="snap.snap-store.ubuntu-software" peer_pid=750 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  160.886101] audit: type=1107 audit(1646503159.163:46): pid=738 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=1786 label="snap.snap-store.ubuntu-software" peer_pid=750 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  160.887535] audit: type=1107 audit(1646503159.163:47): pid=738 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=1786 label="snap.snap-store.ubuntu-software" peer_pid=750 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  162.161056] audit: type=1400 audit(1646503160.435:48): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=1786 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  210.125388] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  288.924876] rfkill: input handler enabled
[  293.550159] rfkill: input handler disabled
[  302.832238] rfkill: input handler enabled
[  309.707980] rfkill: input handler disabled
[  353.876735] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[  353.876856] No Local Variables are initialized for Method [_TMP]

[  353.876875] No Arguments are initialized for method [_TMP]

[  353.876907] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[  384.638596] rfkill: input handler enabled
[  391.040317] rfkill: input handler disabled
[ 1399.934345] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[ 1399.934469] No Local Variables are initialized for Method [_TMP]

[ 1399.934489] No Arguments are initialized for method [_TMP]

[ 1399.934519] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[ 1424.088323] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[ 1424.088467] No Local Variables are initialized for Method [_TMP]

[ 1424.088487] No Arguments are initialized for method [_TMP]

[ 1424.088521] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[ 1529.609097] perf: interrupt took too long (2524 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 2108.103396] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[ 2108.103537] No Local Variables are initialized for Method [_TMP]

[ 2108.103557] No Arguments are initialized for method [_TMP]

[ 2108.103591] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[ 2144.354174] perf: interrupt took too long (3215 > 3155), lowering kernel.perf_event_max_sample_rate to 62000
[ 2341.613602] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[ 2341.613723] No Local Variables are initialized for Method [_TMP]

[ 2341.613743] No Arguments are initialized for method [_TMP]

[ 2341.613775] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[ 2987.553961] perf: interrupt took too long (4034 > 4018), lowering kernel.perf_event_max_sample_rate to 49500
[ 3005.335031] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[ 3005.335175] No Local Variables are initialized for Method [_TMP]

[ 3005.335195] No Arguments are initialized for method [_TMP]

[ 3005.335228] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
[ 3230.715393] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210331/evregion-281)

[ 3230.715523] No Local Variables are initialized for Method [_TMP]

[ 3230.715543] No Arguments are initialized for method [_TMP]

[ 3230.715577] ACPI Error: Aborting method \_SB.STR0._TMP due to previous error (AE_ERROR) (20210331/psparse-529)
dario@neo10a-4bk64:~$

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 05/03/2022, à 13:28

[ Résolu ] Son strident et aigu Carte son Intel ES8316

#2 Le 05/03/2022, à 13:31

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#3 Le 05/03/2022, à 14:37

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#4 Le 05/03/2022, à 15:21

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#5 Le 05/03/2022, à 15:26

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#6 Le 05/03/2022, à 15:37

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#7 Le 05/03/2022, à 15:40

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#8 Le 05/03/2022, à 15:41

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#9 Le 05/03/2022, à 15:49

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#10 Le 05/03/2022, à 15:51

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#11 Le 05/03/2022, à 16:14

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#12 Le 05/03/2022, à 16:29

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#13 Le 05/03/2022, à 18:28

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#14 Le 05/03/2022, à 18:36

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#15 Le 05/03/2022, à 18:36

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#16 Le 05/03/2022, à 18:46

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#17 Le 05/03/2022, à 18:54

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#18 Le 05/03/2022, à 19:11

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#19 Le 05/03/2022, à 19:19

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#20 Le 05/03/2022, à 19:42

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#21 Le 05/03/2022, à 19:49

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#22 Le 05/03/2022, à 19:51

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#23 Le 05/03/2022, à 19:51

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#24 Le 05/03/2022, à 19:54

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

#25 Le 05/03/2022, à 19:57

Re : [ Résolu ] Son strident et aigu Carte son Intel ES8316

Pied de page des forums