Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 17/03/2022, à 20:26

ollivier

[résolu] ordinateur HS

Bonjour,
J'ai installé Ubuntu 20.04.4 LTS, sur un poste acer aspire A515-54 il y a quelques jours, et j'ai dû faire une fausse manip en voulant faire un réglage, et là c'est planté, au démarrage il me donne le message suivant :

"x86 cpu: SGX disabled by bios, Gave up waiting for root file system device, Common problems: boot args (cat/proc/modules; ls/dev)
- Check rootdelay= (did the systèm wait long enough?)
- Missing modules (cat /proc/modules; 1s /dev)
ALERT! UUID=e764bd20-b538-4956-84de-de3777ad4ces does not exist. Dropping to a shell! ...

Quelqu'un peut-il m'aider ? Merci ...

Dernière modification par ollivier (Le 19/03/2022, à 10:18)

Hors ligne

#2 Le 17/03/2022, à 20:33

xubu1957

Re : [résolu] ordinateur HS

Bonjour,

Comme demandé dans le premier message du tutoriel Retour utilisable de commande

Pour ajouter toi-même les balises code à ton précédent message #1 :

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

1642675956.jpg

"x86 cpu: SGX disabled by bios, Gave up waiting for root file system device, Common problems: boot args (cat/proc/modules; ls/dev)
- Check rootdelay= (did the systèm wait long enough?)
- Missing modules (cat /proc/modules; 1s /dev)
ALERT! UUID=e764bd20-b538-4956-84de-de3777ad4ces does not exist. Dropping to a shell! ...

Tu as cette proposition de démarrer sur un live usb.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 17/03/2022, à 21:36

ollivier

Re : [résolu] ordinateur HS

Lorsque je rentre la commande  "sudo add-apt-repository -y ppa:yannubuntu/boot-repair; sudo apt update; sudo apt install -y boot-info; boot-info"   indiquée, voici le retour que j'obtiens :

ubuntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubuntu/boot-repair; sudo apt update; sudo apt install -y boot-info; boot-info
Cannot add PPA: 'ppa:~yannubuntu/ubuntu/boot-repair'.
ERROR: '~yannubuntu' user or team does not exist.
Ign :1 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal InRelease
Atteint :2 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal Release
Err :3 http://archive.ubuntu.com/ubuntu focal InRelease
  Erreur temporaire de résolution de « archive.ubuntu.com »
Err :4 http://archive.ubuntu.com/ubuntu focal-updates InRelease
  Erreur temporaire de résolution de « archive.ubuntu.com »
Err :5 http://security.ubuntu.com/ubuntu focal-security InRelease
  Erreur temporaire de résolution de « security.ubuntu.com »
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
W: Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/focal/InRelease  Erreur temporaire de résolution de « archive.ubuntu.com »
W: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/focal-security/InRelease  Erreur temporaire de résolution de « security.ubuntu.com »
W: Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/focal-updates/InRelease  Erreur temporaire de résolution de « archive.ubuntu.com »
W: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet boot-info
boot-info : commande introuvable

Hors ligne

#4 Le 17/03/2022, à 21:39

xubu1957

Re : [résolu] ordinateur HS

L'ordi est-il branché en filaire ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 17/03/2022, à 21:46

ollivier

Re : [résolu] ordinateur HS

oui il est sur secteur

Hors ligne

#6 Le 17/03/2022, à 21:47

xubu1957

Re : [résolu] ordinateur HS

Un cable RJ45, pour avoir une connexion internet.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#7 Le 17/03/2022, à 21:48

ollivier

Re : [résolu] ordinateur HS

non internet est en wi fi

Hors ligne

#8 Le 17/03/2022, à 21:49

xubu1957

Re : [résolu] ordinateur HS

Tu n'as pas une Box, pour le raccorder.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 17/03/2022, à 21:55

ollivier

Re : [résolu] ordinateur HS

voilà je suis connecté en filaire

Hors ligne

#10 Le 17/03/2022, à 21:56

xubu1957

Re : [résolu] ordinateur HS

Refais :

sudo add-apt-repository -y ppa:yannubuntu/boot-repair; sudo apt update; sudo apt install -y boot-info; boot-info

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 17/03/2022, à 22:00

ollivier

Re : [résolu] ordinateur HS

boot-info-4ppa200                                              [20220317_2058]

============================== Boot Info Summary ===============================

 => No boot loader is installed in the MBR of /dev/sdb.

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  -
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        


================================ 0 OS detected =================================


================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: UHD Graphics from Intel Corporation
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04.2 LTS, focal, x86_64)

===================================== UEFI =====================================

BIOS/UEFI firmware: V1.12(1.12) from Insyde Corp.
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot enabled but mokutil says: SecureBoot enabled - Veuillez indiquer ce message à boot.repair@gmail.com.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,0002,0000,2001,2002,2003
Boot0000* ubuntu	HD(1,GPT,ddb4ef53-96dc-4d32-99c5-36438f1265ee,0x800,0x32000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot0001* Linpus lite	HD(1,MBR,0xc3072e18,0x38,0xe13fc8)/File(\EFI\Boot\grubx64.efi)RC
Boot0002* Windows Boot Manager	HD(1,GPT,ddb4ef53-96dc-4d32-99c5-36438f1265ee,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC


============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sdb	: notGPT,	no-BIOSboot,	has-noESP, 	usb-disk,	not-mmc, no-os,	no-wind,	32 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sdb1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far

Partitions info (2/3): _________________________________________________________

sdb1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sdb1	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sdb

fdisk -l (filtered): ___________________________________________________________

Disk sdb: 28.66 GiB, 30752636928 bytes, 60063744 sectors
Disk identifier: 0x00000000
      Boot Start      End  Sectors  Size Id Type
sdb1          32 60063743 60063712 28.7G  c W95 FAT32 (LBA)

parted -lm (filtered): _________________________________________________________

sdb:30.8GB:scsi:512:512:msdos:SanDisk Ultra:;
1:16.4kB:30.8GB:30.8GB:fat32::lba;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID LABEL PARTLABEL
sdb                                                                 
└─sdb1 vfat     8D07-BCC7                                           

Mount points (filtered): _______________________________________________________

                       Avail Use% Mounted on
/dev/sda1               1.7G  76% /cdrom
/dev/sdb1              15.7G  45% /media/ubuntu/8D07-BCC7

Mount options (filtered): ______________________________________________________

/dev/sda1              vfat            ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sdb1              vfat            rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would not act on the boot.

retour :

Hors ligne

#12 Le 17/03/2022, à 22:02

xubu1957

Re : [résolu] ordinateur HS

Pour l'exploitation d'un boot-info, je ne sais pas aider, il faut attendre les connaisseurs.

Je lis :

================================ 0 OS detected =================================

hmm

Dernière modification par xubu1957 (Le 17/03/2022, à 22:04)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#13 Le 17/03/2022, à 22:04

ollivier

Re : [résolu] ordinateur HS

ok merci

Hors ligne

#14 Le 17/03/2022, à 22:17

Nuliel

Re : [résolu] ordinateur HS

et j'ai dû faire une fausse manip en voulant faire un réglage,

Peux tu dire ce que tu as fait avant d'arriver à cet état? Si tu as les commandes ce serait cool

Dernière modification par Nuliel (Le 17/03/2022, à 22:17)

Hors ligne

#15 Le 17/03/2022, à 22:21

xubu1957

Re : [résolu] ordinateur HS

avec :

history

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#16 Le 17/03/2022, à 22:24

Nuliel

Re : [résolu] ordinateur HS

history se base sur un fichier dans le home, mais vu que son install est plantée, ça va pas marcher

Hors ligne

#17 Le 17/03/2022, à 22:26

xubu1957

Re : [résolu] ordinateur HS

C'est compliqué ! sad


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#18 Le 17/03/2022, à 22:28

Nuliel

Re : [résolu] ordinateur HS

Vu le boot info qui ne contient pas son disque principal (uniquement son live usb), soit il a fait une très grosse bêtise, soit son disque principal est en train de mourir/mal branché/...
Sachant que l'erreur indique que la partition EFI a été trouvée, donc le disque semble un peu visible (ou pendant un temps relativement court)

Dernière modification par Nuliel (Le 17/03/2022, à 22:30)

Hors ligne

#19 Le 17/03/2022, à 22:30

ollivier

Re : [résolu] ordinateur HS

En fait j'ai dit à un collègue qu'il se remettait pas en fonction après une veille, j'étais obligé de l'éteindre puis de le rallumer à chaque fois, donc il est internvenu maisje sais pas ce qu'il a fait ...
avec la commande history ça me donne ça :

ubuntu@ubuntu:~$ history
    1  sudo add-apt-repository -y ppa:yannubuntu/boot-repair; sudo apt update; sudo apt install -y boot-info; boot-info
    2  history
ubuntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubuntu/boot-repair; sudo apt update; sudo apt install -y boot-info; boot-info
Ign :1 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal InRelease
Atteint :2 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal Release
Atteint :4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu focal InRelease                                                                         
Atteint :5 http://security.ubuntu.com/ubuntu focal-security InRelease                                                                                     
Atteint :6 http://archive.ubuntu.com/ubuntu focal InRelease                                    
Atteint :7 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Lecture des listes de paquets... Fait
Ign :1 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal InRelease
Atteint :2 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal Release
Atteint :3 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu focal InRelease
Atteint :5 http://archive.ubuntu.com/ubuntu focal InRelease           
Atteint :6 http://security.ubuntu.com/ubuntu focal-security InRelease 
Atteint :7 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
485 paquets peuvent être mis à jour. Exécutez « apt list --upgradable » pour les voir.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
boot-info est déjà la version la plus récente (4ppa200).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 485 non mis à jour.

Hors ligne

#20 Le 17/03/2022, à 22:31

Nuliel

Re : [résolu] ordinateur HS

Tu peux redémarrer sur le live usb (c'est pour limiter les logs du dmesg) et donner

sudo apt update
sudo apt install smartmontools
sudo smartctl -a /dev/sda

(si tu as une erreur, c'est que le disque a disparu)
et aussi

sudo dmesg

Hors ligne

#21 Le 17/03/2022, à 22:56

ollivier

Re : [résolu] ordinateur HS

les retours :

pour sudo apt update :

Ign :1 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal InRelease
Atteint :2 cdrom://Ubuntu 20.04.2.0 LTS _Focal Fossa_ - Release amd64 (20210209.1) focal Release
Atteint :4 http://archive.ubuntu.com/ubuntu focal InRelease                                                         
Atteint :5 http://archive.ubuntu.com/ubuntu focal-updates InRelease                                                 
Atteint :6 http://security.ubuntu.com/ubuntu focal-security InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
485 paquets peuvent être mis à jour. Exécutez « apt list --upgradable » pour les voir.

pour sudo apt install smartmontools :

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
smartmontools est déjà la version la plus récente (7.1-1build1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 485 non mis à jour.

pour sudo smartctl -a /dev/sda :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-43-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x8564:0x1000 (0x1100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

pour sudo dmesg :

[    0.000000] microcode: microcode updated early to revision 0xde, date = 2020-05-18
[    0.000000] Linux version 5.8.0-43-generic (buildd@lcy01-amd64-018) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #49~20.04.1-Ubuntu SMP Fri Feb 5 09:57:56 UTC 2021 (Ubuntu 5.8.0-43.49~20.04.1-generic 5.8.18)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash ---
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008eb37fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008eb38000-0x000000008f437fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008f438000-0x000000009064dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009064e000-0x0000000098a4dfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000098a4e000-0x0000000099a4dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000099a4e000-0x0000000099b4dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000099b4e000-0x0000000099b4efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099b4f000-0x000000009f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff300000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x8b8fa018-0x8b917c57] usable ==> usable
[    0.000000] e820: update [mem 0x8b8fa018-0x8b917c57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000008b8fa017] usable
[    0.000000] reserve setup_data: [mem 0x000000008b8fa018-0x000000008b917c57] usable
[    0.000000] reserve setup_data: [mem 0x000000008b917c58-0x000000008eb37fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008eb38000-0x000000008f437fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008f438000-0x000000009064dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000009064e000-0x0000000098a4dfff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000098a4e000-0x0000000099a4dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000099a4e000-0x0000000099b4dfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000099b4e000-0x0000000099b4efff] usable
[    0.000000] reserve setup_data: [mem 0x0000000099b4f000-0x000000009f7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff300000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045e7fffff] usable
[    0.000000] efi: EFI v2.70 by INSYDE Corp.
[    0.000000] efi: ACPI=0x99b4d000 ACPI 2.0=0x99b4d014 TPMFinalLog=0x99a45000 SMBIOS=0x911b7000 SMBIOS 3.0=0x911b5000 ESRT=0x911b8b98 MEMATTR=0x8b923018 RNG=0x911e8a98 TPMEventLog=0x8b918018 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: fast init done
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Acer Aspire A515-54/Doc_WC, BIOS V1.12 08/23/2019
[    0.000000] tsc: Detected 2100.000 MHz processor
[    0.000007] tsc: Detected 2099.944 MHz TSC
[    0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000008] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000012] last_pfn = 0x45e800 max_arch_pfn = 0x400000000
[    0.000015] MTRR default type: write-back
[    0.000016] MTRR fixed ranges enabled:
[    0.000016]   00000-9FFFF write-back
[    0.000017]   A0000-BFFFF uncachable
[    0.000017]   C0000-FFFFF write-protect
[    0.000018] MTRR variable ranges enabled:
[    0.000019]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000019]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000020]   2 base 009C000000 mask 7FFC000000 uncachable
[    0.000020]   3 base 009B000000 mask 7FFF000000 uncachable
[    0.000021]   4 base 2000000000 mask 6000000000 uncachable
[    0.000021]   5 base 1000000000 mask 7000000000 uncachable
[    0.000022]   6 base 0800000000 mask 7800000000 uncachable
[    0.000022]   7 base 4000000000 mask 4000000000 uncachable
[    0.000023]   8 disabled
[    0.000023]   9 disabled
[    0.000429] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000582] last_pfn = 0x99b4f max_arch_pfn = 0x400000000
[    0.005823] esrt: Reserving ESRT space from 0x00000000911b8b98 to 0x00000000911b8bd0.
[    0.005829] check: Scanning 1 areas for low memory corruption
[    0.005833] Using GB pages for direct mapping
[    0.006135] secureboot: Secure boot enabled
[    0.006135] RAMDISK: [mem 0x3a532000-0x3fffdfff]
[    0.006145] ACPI: Early table checksum verification disabled
[    0.006147] ACPI: RSDP 0x0000000099B4D014 000024 (v02 ACRSYS)
[    0.006149] ACPI: XSDT 0x0000000099B2E188 000104 (v01 ACRSYS ACRPRDCT 00000002      01000013)
[    0.006153] ACPI: FACP 0x0000000099B31000 00010C (v05 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006156] ACPI: DSDT 0x0000000099B04000 0291EC (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006158] ACPI: FACS 0x00000000999E7000 000040
[    0.006160] ACPI: UEFI 0x0000000099A4D000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.006162] ACPI: SSDT 0x0000000099B4A000 001B4A (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.006163] ACPI: SSDT 0x0000000099B46000 003205 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.006165] ACPI: SSDT 0x0000000099B45000 00045A (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.006167] ACPI: SSDT 0x0000000099B44000 000046 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.006168] ACPI: TPM2 0x0000000099B43000 000034 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006170] ACPI: MSDM 0x0000000099B42000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.006172] ACPI: LPIT 0x0000000099B41000 000094 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006173] ACPI: WSMT 0x0000000099B40000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006175] ACPI: SSDT 0x0000000099B3F000 000B14 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.006176] ACPI: SSDT 0x0000000099B3D000 00149F (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.006178] ACPI: DBGP 0x0000000099B3C000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006180] ACPI: DBG2 0x0000000099B3B000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006181] ACPI: SSDT 0x0000000099B3A000 000B9F (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.006183] ACPI: SSDT 0x0000000099B34000 005FC0 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.006185] ACPI: SSDT 0x0000000099B33000 000E46 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.006186] ACPI: NHLT 0x0000000099B32000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006188] ACPI: HPET 0x0000000099B30000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006190] ACPI: APIC 0x0000000099B2F000 000164 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006191] ACPI: MCFG 0x0000000099B4C000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006193] ACPI: SSDT 0x0000000099B02000 000E39 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006194] ACPI: DMAR 0x0000000099B01000 0000A8 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006196] ACPI: SSDT 0x0000000099B03000 000164 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.006198] ACPI: UEFI 0x00000000991E5000 00063A (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.006199] ACPI: UEFI 0x00000000991E4000 00005C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.006201] ACPI: FPDT 0x0000000099B00000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.006203] ACPI: BGRT 0x0000000099AFF000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.006208] ACPI: Local APIC address 0xfee00000
[    0.006512] No NUMA configuration found
[    0.006513] Faking a node at [mem 0x0000000000000000-0x000000045e7fffff]
[    0.006520] NODE_DATA(0) allocated [mem 0x45e7d6000-0x45e7fffff]
[    0.006759] Zone ranges:
[    0.006759]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006760]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006760]   Normal   [mem 0x0000000100000000-0x000000045e7fffff]
[    0.006761]   Device   empty
[    0.006762] Movable zone start for each node
[    0.006764] Early memory node ranges
[    0.006764]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.006765]   node   0: [mem 0x0000000000100000-0x000000008eb37fff]
[    0.006765]   node   0: [mem 0x000000008f438000-0x000000009064dfff]
[    0.006766]   node   0: [mem 0x0000000099b4e000-0x0000000099b4efff]
[    0.006766]   node   0: [mem 0x0000000100000000-0x000000045e7fffff]
[    0.007345] Zeroed struct page in unavailable ranges: 72467 pages
[    0.007346] Initmem setup node 0 [mem 0x0000000000001000-0x000000045e7fffff]
[    0.007347] On node 0 totalpages: 4121837
[    0.007348]   DMA zone: 64 pages used for memmap
[    0.007348]   DMA zone: 21 pages reserved
[    0.007349]   DMA zone: 3998 pages, LIFO batch:0
[    0.007384]   DMA32 zone: 9142 pages used for memmap
[    0.007384]   DMA32 zone: 585039 pages, LIFO batch:63
[    0.015083]   Normal zone: 55200 pages used for memmap
[    0.015083]   Normal zone: 3532800 pages, LIFO batch:63
[    0.061932] Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff]
[    0.062205] ACPI: PM-Timer IO Port: 0x1808
[    0.062206] ACPI: Local APIC address 0xfee00000
[    0.062211] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.062212] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.062212] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.062212] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.062213] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.062213] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.062213] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.062214] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.062214] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.062215] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.062215] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.062215] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.062216] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.062216] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.062216] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.062217] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.062217] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.062218] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.062218] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.062218] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.062276] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.062277] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.062278] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.062279] ACPI: IRQ0 used by override.
[    0.062279] ACPI: IRQ9 used by override.
[    0.062281] Using ACPI (MADT) for SMP configuration information
[    0.062282] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.062286] e820: update [mem 0x8ada7000-0x8ae9afff] usable ==> reserved
[    0.062291] TSC deadline timer available
[    0.062292] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.062303] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.062304] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.062305] PM: hibernation: Registered nosave memory: [mem 0x8ada7000-0x8ae9afff]
[    0.062306] PM: hibernation: Registered nosave memory: [mem 0x8b8fa000-0x8b8fafff]
[    0.062307] PM: hibernation: Registered nosave memory: [mem 0x8b917000-0x8b917fff]
[    0.062308] PM: hibernation: Registered nosave memory: [mem 0x8eb38000-0x8f437fff]
[    0.062309] PM: hibernation: Registered nosave memory: [mem 0x9064e000-0x98a4dfff]
[    0.062309] PM: hibernation: Registered nosave memory: [mem 0x98a4e000-0x99a4dfff]
[    0.062310] PM: hibernation: Registered nosave memory: [mem 0x99a4e000-0x99b4dfff]
[    0.062311] PM: hibernation: Registered nosave memory: [mem 0x99b4f000-0x9f7fffff]
[    0.062311] PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
[    0.062311] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.062312] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.062312] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.062312] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
[    0.062313] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.062313] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.062313] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.062314] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.062314] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.062314] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff2fffff]
[    0.062315] PM: hibernation: Registered nosave memory: [mem 0xff300000-0xffffffff]
[    0.062316] [mem 0x9f800000-0xdfffffff] available for PCI devices
[    0.062316] Booting paravirtualized kernel on bare hardware
[    0.062319] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.062323] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.062630] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[    0.062634] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[    0.062635] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.062654] Built 1 zonelists, mobility grouping on.  Total pages: 4057410
[    0.062654] Policy zone: Normal
[    0.062655] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash ---
[    0.064404] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.065282] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.065336] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.133301] Memory: 15933580K/16487348K available (14339K kernel code, 2563K rwdata, 5356K rodata, 2636K init, 4900K bss, 553768K reserved, 0K cma-reserved)
[    0.133309] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=1
[    0.133425] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.133439] ftrace: allocating 46188 entries in 181 pages
[    0.146209] ftrace: allocated 181 pages with 5 groups
[    0.146318] rcu: Hierarchical RCU implementation.
[    0.146319] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.146320] 	Trampoline variant of Tasks RCU enabled.
[    0.146320] 	Rude variant of Tasks RCU enabled.
[    0.146320] 	Tracing variant of Tasks RCU enabled.
[    0.146321] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.146321] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.148622] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.149127] random: crng done (trusting CPU's manufacturer)
[    0.149153] Console: colour dummy device 80x25
[    0.149173] printk: console [tty0] enabled
[    0.149192] ACPI: Core revision 20200528
[    0.149547] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.149698] APIC: Switch to symmetric I/O mode setup
[    0.149700] DMAR: Host address width 39
[    0.149701] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.149705] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.149705] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.149708] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.149709] DMAR: RMRR base: 0x00000098850000 end: 0x0000009886ffff
[    0.149710] DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff
[    0.149711] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.149712] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.149712] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.152224] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.152225] x2apic enabled
[    0.152249] Switched APIC routing to cluster x2apic.
[    0.158192] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.177794] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e44fb6c2ab, max_idle_ns: 440795206594 ns
[    0.177798] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.88 BogoMIPS (lpj=8399776)
[    0.177800] pid_max: default: 32768 minimum: 301
[    0.180456] LSM: Security Framework initializing
[    0.180466] Yama: becoming mindful.
[    0.180487] AppArmor: AppArmor initialized
[    0.180539] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.180566] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.180803] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.180826] process: using mwait in idle threads
[    0.180827] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.180828] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.180831] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.180832] Spectre V2 : Mitigation: Enhanced IBRS
[    0.180832] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.180833] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.180834] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.180836] SRBDS: Mitigation: TSX disabled
[    0.181049] Freeing SMP alternatives memory: 40K
[    0.183273] smpboot: CPU0: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.183340] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.183345] ... version:                4
[    0.183345] ... bit width:              48
[    0.183345] ... generic registers:      4
[    0.183346] ... value mask:             0000ffffffffffff
[    0.183346] ... max period:             00007fffffffffff
[    0.183346] ... fixed-purpose events:   3
[    0.183347] ... event mask:             000000070000000f
[    0.183371] rcu: Hierarchical SRCU implementation.
[    0.184027] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.184076] smp: Bringing up secondary CPUs ...
[    0.184129] x86: Booting SMP configuration:
[    0.184129] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.187324] smp: Brought up 1 node, 8 CPUs
[    0.187324] smpboot: Max logical packages: 1
[    0.187324] smpboot: Total of 8 processors activated (33599.10 BogoMIPS)
[    0.190271] devtmpfs: initialized
[    0.190271] x86/mm: Memory block size: 128MB
[    0.190539] PM: Registering ACPI NVS region [mem 0x98a4e000-0x99a4dfff] (16777216 bytes)
[    0.190539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.190539] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.190539] pinctrl core: initialized pinctrl subsystem
[    0.190539] PM: RTC time: 21:39:44, date: 2022-03-17
[    0.190539] thermal_sys: Registered thermal governor 'fair_share'
[    0.190539] thermal_sys: Registered thermal governor 'bang_bang'
[    0.190539] thermal_sys: Registered thermal governor 'step_wise'
[    0.190539] thermal_sys: Registered thermal governor 'user_space'
[    0.190539] thermal_sys: Registered thermal governor 'power_allocator'
[    0.190539] NET: Registered protocol family 16
[    0.190539] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.190539] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.190644] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.190654] audit: initializing netlink subsys (disabled)
[    0.190666] audit: type=2000 audit(1647553184.036:1): state=initialized audit_enabled=0 res=1
[    0.190666] EISA bus registered
[    0.190666] cpuidle: using governor ladder
[    0.190666] cpuidle: using governor menu
[    0.190666] ACPI: bus type PCI registered
[    0.190666] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.190666] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.190666] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.190666] PCI: Using configuration type 1 for base access
[    0.190666] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.193818] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.193818] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.193864] ACPI: Added _OSI(Module Device)
[    0.193864] ACPI: Added _OSI(Processor Device)
[    0.193865] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.193865] ACPI: Added _OSI(Processor Aggregator Device)
[    0.193866] ACPI: Added _OSI(Linux-Dell-Video)
[    0.193866] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.193867] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.224027] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.226104] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.228825] ACPI: Dynamic OEM Table Load:
[    0.228834] ACPI: SSDT 0xFFFF926E8B4A7B00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.229732] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.234332] ACPI: Dynamic OEM Table Load:
[    0.234337] ACPI: SSDT 0xFFFF926E8B4BD800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.235309] ACPI: Dynamic OEM Table Load:
[    0.235314] ACPI: SSDT 0xFFFF926E8BC2D800 000560 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.236354] ACPI: Dynamic OEM Table Load:
[    0.236358] ACPI: SSDT 0xFFFF926E8B4AB400 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.237285] ACPI: Dynamic OEM Table Load:
[    0.237291] ACPI: SSDT 0xFFFF926E8B4B4000 000BE2 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.238434] ACPI: Dynamic OEM Table Load:
[    0.238439] ACPI: SSDT 0xFFFF926E8BC29000 000778 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.239541] ACPI: Dynamic OEM Table Load:
[    0.239546] ACPI: SSDT 0xFFFF926E8B4BA000 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.240630] ACPI: Dynamic OEM Table Load:
[    0.240635] ACPI: SSDT 0xFFFF926E8B4B0000 000D74 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.242290] ACPI: Dynamic OEM Table Load:
[    0.242294] ACPI: SSDT 0xFFFF926E8B4BF400 0003CA (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.245488] ACPI: EC: EC started
[    0.245488] ACPI: EC: interrupt blocked
[    0.245978] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.245979] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.245979] ACPI: Interpreter enabled
[    0.246013] ACPI: (supports S0 S3 S4 S5)
[    0.246014] ACPI: Using IOAPIC for interrupt routing
[    0.246041] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.246338] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.249810] ACPI: Power Resource [BTPR] (on)
[    0.250373] ACPI: Power Resource [USBC] (on)
[    0.260569] ACPI: Power Resource [V0PR] (on)
[    0.260726] ACPI: Power Resource [V1PR] (on)
[    0.260881] ACPI: Power Resource [V2PR] (on)
[    0.262566] ACPI: Power Resource [WRST] (on)
[    0.264919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.264924] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.268402] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.270545] PCI host bridge to bus 0000:00
[    0.270547] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.270548] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.270548] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.270549] pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
[    0.270550] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.270551] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.270558] pci 0000:00:00.0: [8086:9b61] type 00 class 0x060000
[    0.271317] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[    0.271334] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.271340] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.271344] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.271360] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.272293] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[    0.272329] pci 0000:00:12.0: reg 0x10: [mem 0xb12a2000-0xb12a2fff 64bit]
[    0.273203] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[    0.273233] pci 0000:00:14.0: reg 0x10: [mem 0xb1280000-0xb128ffff 64bit]
[    0.273320] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.274112] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[    0.274146] pci 0000:00:14.2: reg 0x10: [mem 0xb12a0000-0xb12a1fff 64bit]
[    0.274164] pci 0000:00:14.2: reg 0x18: [mem 0xb12a3000-0xb12a3fff 64bit]
[    0.274984] pci 0000:00:14.3: [8086:02f0] type 00 class 0x028000
[    0.275044] pci 0000:00:14.3: reg 0x10: [mem 0xb1298000-0xb129bfff 64bit]
[    0.275251] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.276313] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[    0.276769] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.279378] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[    0.279415] pci 0000:00:16.0: reg 0x10: [mem 0xb12a5000-0xb12a5fff 64bit]
[    0.279513] pci 0000:00:16.0: PME# supported from D3hot
[    0.280425] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400
[    0.280674] pci 0000:00:17.0: reg 0x10: [mem 0xb1290000-0xb1297fff]
[    0.280743] pci 0000:00:17.0: reg 0x14: [mem 0xb12a8000-0xb12a80ff]
[    0.280813] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
[    0.280882] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
[    0.280951] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.280972] pci 0000:00:17.0: reg 0x24: [mem 0xb1200000-0xb127ffff]
[    0.281276] pci 0000:00:17.0: PME# supported from D3hot
[    0.282242] pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400
[    0.282368] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.282408] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.283286] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[    0.284299] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040380
[    0.284371] pci 0000:00:1f.3: reg 0x10: [mem 0xb129c000-0xb129ffff 64bit]
[    0.284434] pci 0000:00:1f.3: reg 0x20: [mem 0xb1000000-0xb10fffff 64bit]
[    0.284567] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.285431] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[    0.285491] pci 0000:00:1f.4: reg 0x10: [mem 0xb12a6000-0xb12a60ff 64bit]
[    0.285589] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.286435] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[    0.286462] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.287319] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.287357] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.287382] pci 0000:01:00.0: reg 0x18: [mem 0xb1104000-0xb1104fff 64bit]
[    0.287399] pci 0000:01:00.0: reg 0x20: [mem 0xb1100000-0xb1103fff 64bit]
[    0.287531] pci 0000:01:00.0: supports D1 D2
[    0.287532] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.287733] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.287736] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.287738] pci 0000:00:1d.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.288299] ACPI: EC: interrupt unblocked
[    0.288299] ACPI: EC: event unblocked
[    0.288299] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.288299] ACPI: EC: GPE=0x10
[    0.288299] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.288299] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.288299] iommu: Default domain type: Translated 
[    0.288299] SCSI subsystem initialized
[    0.288299] libata version 3.00 loaded.
[    0.288299] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.288299] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.288299] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.288299] vgaarb: loaded
[    0.288299] ACPI: bus type USB registered
[    0.288299] usbcore: registered new interface driver usbfs
[    0.288299] usbcore: registered new interface driver hub
[    0.288299] usbcore: registered new device driver usb
[    0.288299] pps_core: LinuxPPS API ver. 1 registered
[    0.288299] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.288299] PTP clock support registered
[    0.288299] EDAC MC: Ver: 3.0.0
[    0.289848] Registered efivars operations
[    0.289886] NetLabel: Initializing
[    0.289886] NetLabel:  domain hash size = 128
[    0.289886] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.289886] NetLabel:  unlabeled traffic allowed by default
[    0.289888] PCI: Using ACPI for IRQ routing
[    0.335102] PCI: pci_cache_line_size set to 64 bytes
[    0.335252] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.335253] e820: reserve RAM buffer [mem 0x8ada7000-0x8bffffff]
[    0.335253] e820: reserve RAM buffer [mem 0x8b8fa018-0x8bffffff]
[    0.335254] e820: reserve RAM buffer [mem 0x8eb38000-0x8fffffff]
[    0.335254] e820: reserve RAM buffer [mem 0x9064e000-0x93ffffff]
[    0.335255] e820: reserve RAM buffer [mem 0x99b4f000-0x9bffffff]
[    0.335255] e820: reserve RAM buffer [mem 0x45e800000-0x45fffffff]
[    0.335257] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.335257] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.338842] clocksource: Switched to clocksource tsc-early
[    0.346871] VFS: Disk quotas dquot_6.6.0
[    0.346882] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.346957] AppArmor: AppArmor Filesystem Enabled
[    0.346980] pnp: PnP ACPI init
[    0.347094] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.347098] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347374] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.347375] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.347376] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.347377] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.347377] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.347378] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.347379] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[    0.347380] system 00:01: [mem 0x00000000-0x003fffff] could not be reserved
[    0.347382] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347615] system 00:02: [io  0x2000-0x20fe] has been reserved
[    0.347617] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347715] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.347716] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.347718] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347757] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.347824] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.347826] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.347842] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.348109] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.348110] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.348111] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.348113] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348288] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.348289] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.348289] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.348290] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.348291] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.348292] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.348292] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.348293] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.348295] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348459] system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.348461] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348614] pnp: PnP ACPI: found 10 devices
[    0.353832] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.353871] NET: Registered protocol family 2
[    0.354000] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.354122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.354279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.354324] TCP: Hash tables configured (established 131072 bind 65536)
[    0.354415] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.354455] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.354496] NET: Registered protocol family 1
[    0.354499] NET: Registered protocol family 44
[    0.354512] pci 0000:00:15.0: BAR 0: assigned [mem 0x9f800000-0x9f800fff 64bit]
[    0.354569] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.354571] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.354573] pci 0000:00:1d.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.354579] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.354579] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.354580] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.354581] pci_bus 0000:00: resource 7 [mem 0x9f800000-0xdfffffff window]
[    0.354581] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.354582] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.354583] pci_bus 0000:01: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.354690] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.356641] PCI: CLS 64 bytes, default 64
[    0.356671] Trying to unpack rootfs image as initramfs...
[    0.539876] Freeing initrd memory: 92976K
[    0.557906] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.557909] software IO TLB: mapped [mem 0x86da7000-0x8ada7000] (64MB)
[    0.558293] check: Scanning for low memory corruption every 60 seconds
[    0.558934] Initialise system trusted keyrings
[    0.558945] Key type blacklist registered
[    0.558979] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.560805] zbud: loaded
[    0.561151] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.561349] fuse: init (API version 7.31)
[    0.561527] integrity: Platform Keyring initialized
[    0.568445] Key type asymmetric registered
[    0.568446] Asymmetric key parser 'x509' registered
[    0.568451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.568479] io scheduler mq-deadline registered
[    0.568788] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.568851] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.568882] efifb: probing for efifb
[    0.568901] efifb: showing boot graphics
[    0.570248] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
[    0.570249] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.570249] efifb: scrolling: redraw
[    0.570250] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.570276] fbcon: Deferring console take-over
[    0.570276] fb0: EFI VGA frame buffer device
[    0.570281] intel_idle: MWAIT substates: 0x11142120
[    0.570281] intel_idle: v0.5.1 model 0x8E
[    0.570561] intel_idle: Local APIC timer is reliable in all C-states
[    0.570746] ACPI: AC Adapter [ACAD] (on-line)
[    0.570783] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.570793] ACPI: Power Button [PWRB]
[    0.570807] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.570814] ACPI: Sleep Button [SLPB]
[    0.570831] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.570850] ACPI: Lid Switch [LID0]
[    0.570865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.570881] ACPI: Power Button [PWRF]
[    0.572631] [Firmware Bug]: No valid trip found
[    0.572833] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.573675] battery: ACPI: Battery Slot [BAT1] (battery present)
[    0.574266] Linux agpgart interface v0.103
[    0.641950] loop: module loaded
[    0.642414] libphy: Fixed MDIO Bus: probed
[    0.642415] tun: Universal TUN/TAP device driver, 1.6
[    0.642490] PPP generic driver version 2.4.2
[    0.642654] VFIO - User Level meta-driver version: 0.3
[    0.642844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.642848] ehci-pci: EHCI PCI platform driver
[    0.642859] ehci-platform: EHCI generic platform driver
[    0.642872] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.642874] ohci-pci: OHCI PCI platform driver
[    0.642882] ohci-platform: OHCI generic platform driver
[    0.642890] uhci_hcd: USB Universal Host Controller Interface driver
[    0.642945] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.642946] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.644771] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.644965] mousedev: PS/2 mouse device common for all mice
[    0.645211] rtc_cmos 00:04: RTC can wake from S4
[    0.646089] rtc_cmos 00:04: registered as rtc0
[    0.646317] rtc_cmos 00:04: setting system clock to 2022-03-17T21:39:45 UTC (1647553185)
[    0.646336] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.646344] i2c /dev entries driver
[    0.646401] device-mapper: uevent: version 1.0.3
[    0.646525] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    0.646549] platform eisa.0: Probing EISA bus 0
[    0.646551] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.646553] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.646554] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.646556] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.646557] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.646558] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.646560] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.646561] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.646562] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.646564] platform eisa.0: EISA: Detected 0 cards
[    0.646567] intel_pstate: Intel P-state driver initializing
[    0.647479] intel_pstate: HWP enabled
[    0.647557] ledtrig-cpu: registered to indicate activity on CPUs
[    0.647562] EFI Variables Facility v0.08 2004-May-17
[    0.652015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.679219] intel_pmc_core INT33A1:00:  initialized
[    0.679338] drop_monitor: Initializing network drop monitor service
[    0.679471] NET: Registered protocol family 10
[    0.683214] Segment Routing with IPv6
[    0.683227] NET: Registered protocol family 17
[    0.683291] Key type dns_resolver registered
[    0.683731] microcode: sig=0x806ec, pf=0x4, revision=0xde
[    0.683924] microcode: Microcode Update Driver: v2.2.
[    0.683927] IPI shorthand broadcast: enabled
[    0.683932] sched_clock: Marking stable (679119922, 4801824)->(689177560, -5255814)
[    0.684143] registered taskstats version 1
[    0.684151] Loading compiled-in X.509 certificates
[    0.684685] Loaded X.509 cert 'Build time autogenerated kernel key: a4bf29c873175f8a852fbcf55017dd6a88fb8d5b'
[    0.684714] zswap: loaded using pool lzo/zbud
[    0.684868] Key type ._fscrypt registered
[    0.684868] Key type .fscrypt registered
[    0.684869] Key type fscrypt-provisioning registered
[    0.684905] Key type trusted registered
[    0.686491] Key type encrypted registered
[    0.686493] AppArmor: AppArmor sha1 policy hashing enabled
[    0.688467] integrity: Loading X.509 certificate: UEFI:db
[    0.688502] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.688502] integrity: Loading X.509 certificate: UEFI:db
[    0.688525] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.688526] integrity: Loading X.509 certificate: UEFI:db
[    0.688538] integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5'
[    0.688539] integrity: Loading X.509 certificate: UEFI:db
[    0.688780] integrity: Loaded X.509 cert 'LINPUS: 967f81f2f4f5ac0f24fca5e42982e4ad1e56ddff'
[    0.688781] integrity: Loading X.509 certificate: UEFI:db
[    0.689024] integrity: Loaded X.509 cert 'Linpus: linpus.com: 2e092cab5e97a89f94a6e272ec7267c267cf4483'
[    0.689024] integrity: Loading X.509 certificate: UEFI:db
[    0.689169] integrity: Loaded X.509 cert 'Quanta NB4: 073d6a4c306ea5b9499e861c7ba55cde'
[    0.689623] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.689650] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    0.689651] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.689817] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.691364] ima: Allocated hash algorithm: sha1
[    0.950073] ima: No architecture policies found
[    0.950099] evm: Initialising EVM extended attributes:
[    0.950100] evm: security.selinux
[    0.950101] evm: security.SMACK64
[    0.950102] evm: security.SMACK64EXEC
[    0.950103] evm: security.SMACK64TRANSMUTE
[    0.950104] evm: security.SMACK64MMAP
[    0.950105] evm: security.apparmor
[    0.950106] evm: security.ima
[    0.950107] evm: security.capability
[    0.950109] evm: HMAC attrs: 0x1
[    0.952356] PM:   Magic number: 14:619:702
[    0.952790] RAS: Correctable Errors collector initialized.
[    0.952797] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
[    0.954860] Freeing unused decrypted memory: 2040K
[    0.955205] Freeing unused kernel image (initmem) memory: 2636K
[    0.955206] Write protecting the kernel read-only data: 22528k
[    0.955835] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.956069] Freeing unused kernel image (rodata/data gap) memory: 788K
[    0.967712] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.967716] Run /init as init process
[    0.967717]   with arguments:
[    0.967717]     /init
[    0.967718]     maybe-ubiquity
[    0.967718]     splash
[    0.967719]     ---
[    0.967719]   with environment:
[    0.967719]     HOME=/
[    0.967720]     TERM=linux
[    0.967720]     BOOT_IMAGE=/casper/vmlinuz
[    0.967721]     file=/cdrom/preseed/ubuntu.seed
[    1.022694] hid: raw HID events driver (C) Jiri Kosina
[    1.024459] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.024464] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.025532] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.025536] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.025732] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    1.025734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.025735] usb usb1: Product: xHCI Host Controller
[    1.025736] usb usb1: Manufacturer: Linux 5.8.0-43-generic xhci-hcd
[    1.025737] usb usb1: SerialNumber: 0000:00:14.0
[    1.025871] hub 1-0:1.0: USB hub found
[    1.025885] hub 1-0:1.0: 12 ports detected
[    1.027251] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.027253] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.027255] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.027278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[    1.027279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.027280] usb usb2: Product: xHCI Host Controller
[    1.027280] usb usb2: Manufacturer: Linux 5.8.0-43-generic xhci-hcd
[    1.027281] usb usb2: SerialNumber: 0000:00:14.0
[    1.027357] hub 2-0:1.0: USB hub found
[    1.027365] hub 2-0:1.0: 6 ports detected
[    1.029348] ahci 0000:00:17.0: version 3.0
[    1.029564] ahci 0000:00:17.0: Found 1 remapped NVMe devices.
[    1.029565] ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them.
[    1.029597] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.029677] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl RAID mode
[    1.029679] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
[    1.029680] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.031586] i2c i2c-0: 1/2 memory slots populated (from DMI)
[    1.031837] scsi host0: ahci
[    1.032005] scsi host1: ahci
[    1.032064] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.032069] ata1: SATA max UDMA/133 abar m524288@0xb1200000 port 0xb1200100 irq 16
[    1.032072] ata2: SATA max UDMA/133 abar m524288@0xb1200000 port 0xb1200180 irq 16
[    1.032333] r8169 0000:01:00.0: enabling device (0000 -> 0003)
[    1.049885] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    1.050302] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.051343] libphy: r8169: probed
[    1.051498] r8169 0000:01:00.0 eth0: RTL8168h/8111h, b4:a9:fc:46:95:bd, XID 541, IRQ 124
[    1.051500] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.054084] i2c_hid i2c-ELAN0504:00: supply vdd not found, using dummy regulator
[    1.054092] i2c_hid i2c-ELAN0504:00: supply vddl not found, using dummy regulator
[    1.059230] cryptd: max_cpu_qlen set to 1000
[    1.059742] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.063644] AVX2 version of gcm_enc/dec engaged.
[    1.063645] AES CTR mode by8 optimization enabled
[    1.084708] checking generic (a0000000 7e9000) vs hw (b0000000 1000000)
[    1.084710] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
[    1.084710] fb0: switching to inteldrmfb from EFI VGA
[    1.084757] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.093887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.098161] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.098655] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.350037] ata1: SATA link down (SStatus 4 SControl 300)
[    1.350072] ata2: SATA link down (SStatus 4 SControl 300)
[    1.362071] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.377262] input: ELAN0504:00 04F3:3091 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input5
[    1.377494] input: ELAN0504:00 04F3:3091 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input7
[    1.377683] hid-generic 0018:04F3:3091.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0504:00 04F3:3091] on i2c-ELAN0504:00
[    1.520894] usb 1-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    1.520898] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.520902] usb 1-1: Product: USB Optical Mouse
[    1.520904] usb 1-1: Manufacturer: Logitech
[    1.530498] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0002/input/input8
[    1.530779] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    1.530860] usbcore: registered new interface driver usbhid
[    1.530861] usbhid: USB HID core driver
[    1.562089] tsc: Refined TSC clocksource calibration: 2111.995 MHz
[    1.562104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e7173d7e16, max_idle_ns: 440795242568 ns
[    1.562195] clocksource: Switched to clocksource tsc
[    1.638843] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.670943] usb 2-2: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
[    1.670948] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.670952] usb 2-2: Product: Mass Storage Device
[    1.670954] usb 2-2: Manufacturer: JetFlash
[    1.670957] usb 2-2: SerialNumber: 08WIXEG8FVKYC7F1
[    1.685452] usb-storage 2-2:1.0: USB Mass Storage device detected
[    1.685669] scsi host2: usb-storage 2-2:1.0
[    1.685728] usbcore: registered new interface driver usb-storage
[    1.686647] usbcore: registered new interface driver uas
[    1.790226] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.957947] usb 1-5: New USB device found, idVendor=0408, idProduct=a061, bcdDevice= 0.04
[    1.957951] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.957954] usb 1-5: Product: HD User Facing
[    1.957956] usb 1-5: Manufacturer: SunplusIT Inc
[    2.090063] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    2.240256] usb 1-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    2.240261] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.295406] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[    2.302260] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.302687] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    2.312606] fbcon: i915drmfb (fb0) is primary device
[    2.312606] fbcon: Deferring console take-over
[    2.312608] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    2.958952] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    1100 PQ: 0 ANSI: 6
[    2.959702] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.960840] sd 2:0:0:0: [sda] 14761984 512-byte logical blocks: (7.56 GB/7.04 GiB)
[    2.961909] sd 2:0:0:0: [sda] Write Protect is off
[    2.961915] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[    2.962976] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.996203]  sda: sda1
[    3.001702] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    3.523842] process '/usr/bin/fstype' started with executable stack
[    4.424560] overlayfs: "xino" feature enabled using 2 upper inode bits.
[  280.407858] systemd[1]: Inserted module 'autofs4'
[  280.471295] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[  280.490177] systemd[1]: Detected architecture x86-64.
[  280.510308] systemd[1]: Set hostname to <ubuntu>.
[  280.510666] systemd[1]: Initializing machine ID from random generator.
[  280.512771] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[  280.601058] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[  280.626524] systemd[1]: Created slice system-modprobe.slice.
[  280.626654] systemd[1]: Created slice User and Session Slice.
[  280.626688] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  280.626777] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  280.626797] systemd[1]: Reached target User and Group Name Lookups.
[  280.626803] systemd[1]: Reached target Remote File Systems.
[  280.626809] systemd[1]: Reached target Slices.
[  280.626815] systemd[1]: Reached target Swap.
[  280.626859] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  280.627221] systemd[1]: Listening on LVM2 poll daemon socket.
[  280.627298] systemd[1]: Listening on Syslog Socket.
[  280.627325] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  280.627541] systemd[1]: Listening on Journal Audit Socket.
[  280.627585] systemd[1]: Listening on Journal Socket (/dev/log).
[  280.627632] systemd[1]: Listening on Journal Socket.
[  280.627756] systemd[1]: Listening on udev Control Socket.
[  280.627798] systemd[1]: Listening on udev Kernel Socket.
[  280.628286] systemd[1]: Mounting Huge Pages File System...
[  280.628826] systemd[1]: Mounting POSIX Message Queue File System...
[  280.629424] systemd[1]: Mounting Kernel Debug File System...
[  280.630057] systemd[1]: Mounting Kernel Trace File System...
[  280.631291] systemd[1]: Starting Journal Service...
[  280.632097] systemd[1]: Starting Availability of block devices...
[  280.632822] systemd[1]: Starting Set the console keyboard layout...
[  280.634421] systemd[1]: Starting Create list of static device nodes for the current kernel...
[  280.635049] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  280.635082] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[  280.635765] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[  280.638151] systemd[1]: Starting Load Kernel Modules...
[  280.638882] systemd[1]: Starting Remount Root and Kernel File Systems...
[  280.639646] systemd[1]: Starting udev Coldplug all Devices...
[  280.640389] systemd[1]: Starting Uncomplicated firewall...
[  280.641690] systemd[1]: Mounted Huge Pages File System.
[  280.641881] systemd[1]: Mounted POSIX Message Queue File System.
[  280.641995] systemd[1]: Mounted Kernel Debug File System.
[  280.642101] systemd[1]: Mounted Kernel Trace File System.
[  280.642501] systemd[1]: Finished Availability of block devices.
[  280.643181] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  280.645522] systemd[1]: Finished Uncomplicated firewall.
[  280.649511] systemd[1]: Finished Remount Root and Kernel File Systems.
[  280.651723] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[  280.651801] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[  280.652552] systemd[1]: Starting Create System Users...
[  280.660325] lp: driver loaded but no devices found
[  280.660886] systemd[1]: Finished Create System Users.
[  280.661496] systemd[1]: Starting Create Static Device Nodes in /dev...
[  280.663382] ppdev: user-space parallel port driver
[  280.668395] systemd[1]: Finished Load Kernel Modules.
[  280.669281] systemd[1]: Mounting FUSE Control File System...
[  280.670152] systemd[1]: Mounting Kernel Configuration File System...
[  280.670788] systemd[1]: Starting Apply Kernel Variables...
[  280.671080] systemd[1]: Finished Create Static Device Nodes in /dev.
[  280.672181] systemd[1]: Mounted FUSE Control File System.
[  280.672286] systemd[1]: Mounted Kernel Configuration File System.
[  280.673056] systemd[1]: Starting udev Kernel Device Manager...
[  280.683488] systemd[1]: Finished Apply Kernel Variables.
[  280.704994] systemd[1]: Finished Set the console keyboard layout.
[  280.708199] systemd[1]: Started Journal Service.
[  280.713660] systemd-journald[1012]: Received client request to flush runtime journal.
[  280.822888] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/10251229:00/input/input10
[  280.870735] pstore: Using crash dump compression: deflate
[  280.870763] pstore: Registered efi as persistent store backend
[  280.872468] acer_wmi: Acer Laptop ACPI-WMI Extras
[  280.872484] acer_wmi: Function bitmap for Communication Button: 0x800
[  280.887951] input: Acer WMI hotkeys as /devices/virtual/input/input11
[  280.946912] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[  280.951368] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[  280.951370] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[  280.951370] RAPL PMU: hw unit of domain package 2^-14 Joules
[  280.951371] RAPL PMU: hw unit of domain dram 2^-14 Joules
[  280.951372] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[  280.951372] RAPL PMU: hw unit of domain psys 2^-14 Joules
[  281.020377] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[  281.046405] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[  281.131648] input: ELAN0504:00 04F3:3091 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input12
[  281.131702] input: ELAN0504:00 04F3:3091 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input14
[  281.131740] hid-multitouch 0018:04F3:3091.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0504:00 04F3:3091] on i2c-ELAN0504:00
[  281.255141] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[  281.255163] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[  281.255476] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[  281.422194] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  281.422196] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  281.422197] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[  281.422197] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  281.422198] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  281.422199] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[  281.422200] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[  281.483997] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[  281.484056] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[  281.484105] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[  281.484150] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[  281.484198] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[  281.484245] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[  281.564763] mc: Linux media interface: v0.10
[  281.640924] Bluetooth: Core ver 2.22
[  281.640936] NET: Registered protocol family 31
[  281.640936] Bluetooth: HCI device and connection manager initialized
[  281.640939] Bluetooth: HCI socket layer initialized
[  281.640940] Bluetooth: L2CAP socket layer initialized
[  281.640942] Bluetooth: SCO socket layer initialized
[  281.742522] videodev: Linux video capture interface: v2.00
[  281.757394] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  281.757641] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  281.766165] usbcore: registered new interface driver btusb
[  281.767262] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[  281.768171] Bluetooth: hci0: Device revision is 2
[  281.768172] Bluetooth: hci0: Secure boot is enabled
[  281.768172] Bluetooth: hci0: OTP lock is enabled
[  281.768172] Bluetooth: hci0: API lock is enabled
[  281.768173] Bluetooth: hci0: Debug lock is disabled
[  281.768173] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  281.777665] uvcvideo: Found UVC 1.00 device HD User Facing (0408:a061)
[  281.794940] input: HD User Facing: HD User Facing as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input21
[  281.794989] usbcore: registered new interface driver uvcvideo
[  281.794990] USB Video Class driver (1.1.1)
[  281.953684] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[  282.004405] Intel(R) Wireless WiFi driver for Linux
[  282.005993] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-56.ucode failed with error -2
[  282.082672] intel_rapl_common: Found RAPL domain package
[  282.082674] intel_rapl_common: Found RAPL domain core
[  282.082675] intel_rapl_common: Found RAPL domain uncore
[  282.082676] intel_rapl_common: Found RAPL domain dram
[  282.327087] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[  282.327095] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 65.3.35.22
[  282.327097] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
[  282.327097] iwlwifi 0000:00:14.3: Found debug configuration: 0
[  282.327300] iwlwifi 0000:00:14.3: loaded firmware version 55.d9698065.0 QuZ-a0-hr-b0-55.ucode op_mode iwlmvm
[  282.327665] iwlwifi 0000:00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
[  282.381799] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x354
[  282.560430] iwlwifi 0000:00:14.3: base HW address: 08:71:90:f4:61:a9
[  282.572835] thermal thermal_zone1: failed to read out thermal zone (-61)
[  282.577298] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[  282.895523] zlua: loading out-of-tree module taints kernel.
[  282.895526] zlua: module license 'MIT' taints kernel.
[  282.895526] Disabling lock debugging due to kernel taint
[  283.486416] Bluetooth: hci0: Waiting for firmware download to complete
[  283.487189] Bluetooth: hci0: Firmware loaded in 1680667 usecs
[  283.487232] Bluetooth: hci0: Waiting for device to boot
[  283.502184] Bluetooth: hci0: Device booted in 14612 usecs
[  283.503001] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[  283.505221] Bluetooth: hci0: Applying Intel DDC parameters completed
[  283.506226] Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
[  284.841633] ZFS: Loaded module v0.8.4-1ubuntu11.1, ZFS pool version 5000, ZFS filesystem version 5
[  285.135984] audit: type=1400 audit(1647553469.983:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.hook.configure" pid=1285 comm="apparmor_parser"
[  285.409616] audit: type=1400 audit(1647553470.255:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/11036/usr/lib/snapd/snap-confine" pid=1283 comm="apparmor_parser"
[  285.410515] audit: type=1400 audit(1647553470.259:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/11036/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1283 comm="apparmor_parser"
[  285.477452] audit: type=1400 audit(1647553470.323:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=1287 comm="apparmor_parser"
[  285.580637] audit: type=1400 audit(1647553470.427:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.snap-store" pid=1286 comm="apparmor_parser"
[  285.690566] audit: type=1400 audit(1647553470.539:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=1288 comm="apparmor_parser"
[  285.733580] audit: type=1400 audit(1647553470.579:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=1284 comm="apparmor_parser"
[  286.738056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  286.738058] Bluetooth: BNEP filters: protocol multicast
[  286.738061] Bluetooth: BNEP socket layer initialized
[  286.746579] NET: Registered protocol family 38
[  288.261832] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[  288.338017] Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7
[  288.446129] r8169 0000:01:00.0 enp1s0: Link is Down
[  289.517971] audit: type=1400 audit(1647553474.367:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/11036/usr/lib/snapd/snap-confine" pid=1678 comm="apparmor_parser"
[  289.538956] audit: type=1400 audit(1647553474.387:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/11036/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1678 comm="apparmor_parser"
[  289.699380] audit: type=1400 audit(1647553474.547:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=1682 comm="apparmor_parser"
[  290.141493] audit: type=1400 audit(1647553474.987:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=1683 comm="apparmor_parser"
[  290.159193] audit: type=1400 audit(1647553475.007:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=1684 comm="apparmor_parser"
[  290.246445] audit: type=1400 audit(1647553475.095:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=1685 comm="apparmor_parser"
[  290.289773] audit: type=1400 audit(1647553475.135:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=1681 comm="apparmor_parser"
[  291.687846] Bluetooth: RFCOMM TTY layer initialized
[  291.687856] Bluetooth: RFCOMM socket layer initialized
[  291.687860] Bluetooth: RFCOMM ver 1.11
[  292.292233] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control off
[  292.292244] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[  295.833014] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[  418.086528] Lockdown: archdetect: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[  423.750847] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[  424.167922] rfkill: input handler disabled
[  434.534376] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7

Hors ligne

#22 Le 17/03/2022, à 23:56

ollivier

Re : [résolu] ordinateur HS

Pas rassurant vos commentaires du #18 :
"Vu le boot info qui ne contient pas son disque principal (uniquement son live usb), soit il a fait une très grosse bêtise, soit son disque principal est en train de mourir/mal branché/...
Sachant que l'erreur indique que la partition EFI a été trouvée, donc le disque semble un peu visible (ou pendant un temps relativement court)" ...
Pourtant sous windows l'ordi semble fonctionner ...

Hors ligne

#23 Le 18/03/2022, à 09:19

malbo

Re : [résolu] ordinateur HS

Bonjour,
Dans un modèle acer aspire A515-54, il peut se produire que le SSD soit invisible pour Ubuntu quand le paramètre SATA mode du Bios est positionné sur "RST with Optane". Je ne dis pas que c'est la solution définitive à ton problème mais essaie de passer ce paramètre SATA mode sur "AHCI" (au lieu de "RST with Optane") pour voir si tu parviens à démarrer sur ton Ubuntu installé.
Pour y parvenir, il faut presser les deux touches Ctrl et S : https://forum.ubuntu-fr.org/viewtopic.p … #p22198261

Hors ligne

#24 Le 19/03/2022, à 10:20

ollivier

Re : [résolu] ordinateur HS

Bonjour,
Problème résolu : paramètre SATA mode passé en "AHCI" au lieu de "RST with Optane", et ça refonctionne comme avant !
Merci beaucoup pour votre aide !

Hors ligne

#25 Le 19/03/2022, à 10:35

iznobe

Re : [résolu] ordinateur HS

Bonjour , juste pour faire remarquer , que je ne comprends pas que les constructeurs et ceux qui cree le BIOS , mettent ce parametre par defaut a " RST with optane " au lieu de " AHCI " ! , c ' est tout de meme une aberation ...

C ' est aussi le cas de ma carte mere et de mon BIOS et j' ai deja rencontré ce probleme , et je dois d' ailleurs change ce parametre apres chaque mise a jour de BIOS , heureusement il ne devrait plus guere y en avoir maintenant , mais franchement c ' est relou .

Comme si tout le monde mettait un RAID de nvme intel sur son ordi ...


retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne