[Résolu] VNC serveur sur Ubuntu 20.04

samprzyswa · Le 01/05/2022, à 15:18

Bonjour,

J'ai en fait mal formulé ma question au départ, j'ai trouvé un tuto "https://www.digitalocean.com/community/ … u-20-04-fr" qui décrit la procédure à suivre avec "tightvncserver" pour un serveur Ubuntu sans interface graphique à la base et il propose d'utiliser xfce4 et de le lancer à chaque connexion.

Mais impossible de le faire fonctionner même avec Xfce, beaucoup de message d'erreur.

Est-ce que je peux lancer le serveur VNC sans avoir à lancer Xfce ?

Merci d'avance pour vos lumières...

Sam.

Dernière modification par samprzyswa (Le 02/05/2022, à 00:32)

xubu1957 · Le 01/05/2022, à 15:30

Bonjour,

Si tu trouves une inspiration dans> Installation de TightVNC sur UBUNTU 20.04

samprzyswa · Le 01/05/2022, à 16:06

xubu1957 a écrit :

Bonjour,
Si tu trouves une inspiration dans> Installation de TightVNC sur UBUNTU 20.04

Oui c'est en gros ce que j'ai fait mais j'ai des messages d'erreur:

systemctl enable --now vncserver
Job for vncserver.service failed because the control process exited with error code.
See "systemctl status vncserver.service" and "journalctl -xe" for details.

systemctl status vncserver.service
● vncserver.service - TightVNC server
     Loaded: loaded (/etc/systemd/system/vncserver.service; enabled; vendor preset: enabled)
     Active: failed (Result: exit-code) since Sun 2022-05-01 16:57:58 CEST; 5min ago
    Process: 512678 ExecStartPre=/usr/bin/vncserver -kill :1 > /dev/null 2>&1 (code=exited, status=217/USER)
    Process: 512679 ExecStart=/usr/bin/vncserver (code=exited, status=217/USER)

mai 01 16:57:58 ubuntu systemd[1]: Starting TightVNC server...
mai 01 16:57:58 ubuntu systemd[512678]: vncserver.service: Failed to determine user credentials: No such process
mai 01 16:57:58 ubuntu systemd[512678]: vncserver.service: Failed at step USER spawning /usr/bin/vncserver: No such process
mai 01 16:57:58 ubuntu systemd[512679]: vncserver.service: Failed to determine user credentials: No such process
mai 01 16:57:58 ubuntu systemd[512679]: vncserver.service: Failed at step USER spawning /usr/bin/vncserver: No such process
mai 01 16:57:58 ubuntu systemd[1]: vncserver.service: Control process exited, code=exited, status=217/USER
mai 01 16:57:58 ubuntu systemd[1]: vncserver.service: Failed with result 'exit-code'.
mai 01 16:57:58 ubuntu systemd[1]: Failed to start TightVNC server.

journalctl -xe
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
-- 
-- The unit vncserver.service has entered the 'failed' state with result 'exit-code'.
mai 01 16:57:58 ubuntu systemd[1]: Failed to start TightVNC server.
-- Subject: A start job for unit vncserver.service has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
-- 
-- A start job for unit vncserver.service has finished with a failure.
-- 
-- The job identifier is 7503 and the job result is failed.
mai 01 16:57:59 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:00 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:01 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:02 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:03 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:04 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:05 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:06 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:07 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:08 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:09 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:10 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:11 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:12 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:13 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:14 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:15 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:16 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:17 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:18 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:19 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:20 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:21 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:22 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:23 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:24 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified
mai 01 16:58:25 ubuntu boinc[487670]: Client is not authorized to connect to ServerNo protocol specified

Je suis un peu perdu là...

Sam.

xubu1957 · Le 01/05/2022, à 16:10

ls -l ~ | grep BOINC

donne une réponse ?

Commande piquée dans [Résolu] Boinc installation

samprzyswa · Le 01/05/2022, à 16:34

En fait ça y est ça marche avec Xfce, je ne me connectais pas sur le bon display:3, maintenant comment le faire fonctionner avec ubuntu-desktop GNOME ?

Sam.

Dernière modification par samprzyswa (Le 01/05/2022, à 17:08)

samprzyswa · Le 01/05/2022, à 21:03

xubu1957 a écrit :

ls -l ~ | grep BOINC
donne une réponse ?
Commande piquée dans [Résolu] Boinc installation

Aucun retour de cette commande...

Sinon est-ce que tu sais comment on configure Xtightvnc pour modifier la résolution de l'écran ?

Sam.

xubu1957 · Le 01/05/2022, à 21:16

Je ne sais pas.

Je trouve cette page > askubuntu.com/questions/648819/couldnt-start-xtightvnc-trying-default-font-path-vncserver

samprzyswa · Le 01/05/2022, à 21:41

xubu1957 a écrit :

Je ne sais pas.
Je trouve cette page > askubuntu.com/questions/648819/couldnt-start-xtightvnc-trying-default-font-path-vncserver

Ok merci effectivement ça va m'aider, mais où se trouvent les infos pour générer ces commandes passées à Xtightvnc

ps -ef | grep Xtightvnc
ubuntu    657142       1  3 21:29 pts/0    00:01:28 Xtightvnc :1 -desktop X -auth /home/ubuntu/.Xauthority -geometry 1024x768 -depth 24 -rfbwait 120000 -rfbauth /home/ubuntu/.vnc/passwd -rfbport 5901 -fp /usr/share/fonts/X11/misc/,/usr/share/fonts/X11/Type1/,/usr/share/fonts/X11/75dpi/,/usr/share/fonts/X11/100dpi/ -co /etc/X11/rgb

Sam.

samprzyswa · Le 01/05/2022, à 23:19

J'ai trouvé dans /usr/share/doc/tightvncserver un truc qui je crois répond à ma question:

# /etc/vnc.conf written by Marcus Brinkmann. This file is in the Public Domain.
#
# This is the configuration file for the vncserver package.
# It is perl syntax, but only variable assignment is allowed.
# A semicolon will be added if missing.
# Every value has suitable defaults, so you probably don't need any file.
#
# This file will be sourced by `vncserver' and `vncpasswd'.
# After this file, $(HOME)/.vncrc will be sourced, so values can be
# overwritten on a per-user basis. If you want to reactivate the default
# value there, you have to specify an empty value. For example, $fontPath
# will set to the default value after
#
# $fontPath = "/foo";
# $fontPath = "";
#
# If you are missing something, please let me know.
# Marcus.Brinkmann@ruhr-uni-bochum.de

# System configuration
# --------------------
#
# This section contains entries that should be true for all users.

# $vncClasses should be the path to the java classes of server.
# $vncClasses = "/usr/share/vncserver";

# $XFConfigPath   can be set to the global XF86Config file. This will be
#                 parsed to gain default values for $fontPath and $colorPath.
#                 If you want to disable this feature, point it to an
#                 invalid file, "/foo" for example.
# $XFConfigPath = "/etc/X11/XF86Config";

# $fontPath should be a comma seperated list of fonts to be added to the font
#           path. If not specified, and $XFConfigPath is valid, vncserver
#           will read the $fontPath from there. If both are not set, the
#           default will apply.
# Example: $fontPath = "tcp/localhost:7100";     # would make vnc to use xfs.
# Example: $fontPath = "";
#	$fontPath .= "/usr/X11R6/lib/X11/fonts/misc/,";
# 	$fontPath .= "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,";
# 	$fontPath .= "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,";
# 	$fontPath .= "/usr/X11R6/lib/X11/fonts/Type1/,";
# 	$fontPath .= "/usr/X11R6/lib/X11/fonts/Speedo/,";
# 	$fontPath .= "/usr/X11R6/lib/X11/fonts/75dpi/,";
# 	$fontPath .= "/usr/X11R6/lib/X11/fonts/100dpi/,";
#	$fontPath .= "/usr/X11R6/lib/X11/fonts/freefont/,";
#	$fontPath .= "/usr/X11R6/lib/X11/fonts/sharefont/";
# I don't know what the default is, though.

# $colorPath should be the RGB file to be used by X. This can also be taken from
#            XF86Config file if specified by $XFConfigPath
# $colorPath = "/usr/X11R6/lib/X11/rgb";

# User configuration
# ------------------
#
# This section contains entries that may change from user to user.

# $vncUserDir contains the filename for the log files directory of Xvnc
#             (the server) and the viewers that are connected to it.
# $vncUserDir = "$ENV{HOME}/.vnc";

# $vncPasswdFile contains the filename of the password file for Xvnc.
# $vncPasswdFile = $vncUserDir . "/passwd";

# $vncStartup points to a script that will be started at the very beginning.
# $vncStartup = "/etc/X11/Xsession";

# $xauthorityFile should be the path to the authority file that should be used
#                 by your vnc X server.
# $xauthorityFile = "$ENV{HOME}/.Xauthority";

# $defaultDesktopName should be set to the default name of the desktop.
#                     This can be changed at the command line with -name.
# $defaultDesktopName = "X";

# $geometry sets framebuffer width & height. Default will be calculated if
#           server is started from within a running X servers. Can be changed at
#           the commandline (-geometry). A fixed default will be used if
#           vncserver is not invoked in a running X session.
# Example:  $geometry ="640x480";

# $depth       sets the framebuffer color depth. Must be between 8 and 32.
# $pixelformat sets the default pixelformat.
#              The default will be calculated if none of both is specified
#              and when vncserver is called from within a running X servers.
#              Can be changed at the command line with option -depth.
#              A fixed default value will be used if vncserver is not
#              invoked in a running X session.
# Example:  $depth = "16";
#           $pixelformat = "rgb565";

# $getDefaultFrom sets the display from which you can query the default of
#                 the above three options, if you don't want to start vncserver
#                 from within a running X server. It will be added to the call
#                 of xdpyinfo.
#                 It is useful to get the default from the X server you will
#                 run xvncviewer in.
# Example:  $getDefaultFrom = "-display localhost:0"

# $rfbwait sets the maximum time in msec to wait for vnc client viewer.
# $rfbwait = "120000";

Sam.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 01/05/2022, à 15:18

[Résolu] VNC serveur sur Ubuntu 20.04

#2 Le 01/05/2022, à 15:30

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#3 Le 01/05/2022, à 16:06

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#4 Le 01/05/2022, à 16:10

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#5 Le 01/05/2022, à 16:34

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#6 Le 01/05/2022, à 21:03

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#7 Le 01/05/2022, à 21:16

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#8 Le 01/05/2022, à 21:41

Re : [Résolu] VNC serveur sur Ubuntu 20.04

#9 Le 01/05/2022, à 23:19

Re : [Résolu] VNC serveur sur Ubuntu 20.04

Pied de page des forums