#1 Le 17/08/2022, à 12:24
- c2h
Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Bonjour,
Ayant mis à niveau mon système vers la version 22.4.1, je me retrouve dans les affres de l'impression, sur lesquelles je me souviens avoir déjà buté lors de la mise à niveau précédente. Je ne puis plus avec mon imprimante HP Deskjet 2540 ni imprimer ni scanner. Et une désinstallation, réinstallation donne ces messages d'erreur :
ubuntu@ubuntu-NUC7i3BNH:~$ hp-setup -ia
HP Linux Imaging and Printing System (ver. 3.21.12)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ?
Using connection type: usb
Setting up device: hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604
---------------------
| PRINT QUEUE SETUP |
---------------------
Using queue name: Deskjet_2540
Locating PPD file... Please wait.
Found PPD file: hplip:0/ppd/hplip/HP/hp-deskjet_2540_series.ppd
Description:
Adding print queue to CUPS:
Device URI: hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604
Queue name: Deskjet_2540
PPD file: hplip:0/ppd/hplip/HP/hp-deskjet_2540_series.ppd
Location:
Information: Deskjet 2540 Device (Automatically setup by HPLIP)
---------------------
| PRINTER TEST PAGE |
---------------------
HP Linux Imaging and Printing System (ver. 3.21.12)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.21.12)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: GUI Modules PyQt4 and PyQt5 are not installed
error: hp-systray requires Qt4 GUI and DBus support. Exiting.
warning: Unable to connect to dbus. Is hp-systray running?
error: Device busy: hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.Si quelqu'un a des lumières, je serai preneur.
Merci
c2h
Dernière modification par c2h (Le 17/08/2022, à 12:53)
Hors ligne
#2 Le 17/08/2022, à 12:31
- xubu1957
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Bonjour,
Dans le tutoriel épinglé, sylvain3800 a écrit :
I ] Le Titre du message
Cela parait bête , mais si dans le titre la marque et le modèle de l'imprimante pouvait être écrit cela serait déjà super utile pour les aidants, qui peuvent déjà se faire une première idée des pilotes qu'il te faut et de la procédure qu'il te faudra suivre pour les installer au besoin .
Bon la plupart du temps ces infos sont données ,,,, mais des fois ... non ... c'est pour cela je précise.B.2 )Les infos a donner quel que soit la marque de l'imprimante
il suffit de copier/coller ces commandes :dpkg -l | grep cupslpstat -t/usr/sbin/lpinfo -vcat /var/log/cups/error_logdpkg -l | grep -v ^ii
> Tuto : les Informations utiles à donner lorsque j'ai un problème.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 17/08/2022, à 13:00
- c2h
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Voici les résultats :
a)
ubuntu@ubuntu-NUC7i3BNH:~$ dpkg -l | grep cups
ii bluez-cups 5.64-0ubuntu1 amd64 Bluetooth printer driver for CUPS
ii cups 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface
ii cups-browsed 1.28.15-0ubuntu1 amd64 OpenPrinting CUPS Filters - cups-browsed
ii cups-bsd 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - BSD commands
ii cups-client 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - client programs (SysV)
ii cups-common 2.4.1op1-1ubuntu4.1 all Common UNIX Printing System(tm) - common files
ii cups-core-drivers 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - driverless printing
ii cups-daemon 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - daemon
ii cups-filters 1.28.15-0ubuntu1 amd64 OpenPrinting CUPS Filters - Main Package
ii cups-filters-core-drivers 1.28.15-0ubuntu1 amd64 OpenPrinting CUPS Filters - Driverless printing
ii cups-ipp-utils 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - IPP developer/admin utilities
ii cups-pk-helper 0.2.6-1ubuntu5 amd64 PolicyKit helper to configure cups with fine-grained privileges
ii cups-ppdc 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - PPD manipulation utilities
ii cups-server-common 2.4.1op1-1ubuntu4.1 all Common UNIX Printing System(tm) - server common files
ii libcups2:amd64 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - Core library
ii libcups2:i386 2.4.1op1-1ubuntu4.1 i386 Common UNIX Printing System(tm) - Core library
ii libcupsfilters1:amd64 1.28.15-0ubuntu1 amd64 OpenPrinting CUPS Filters - Shared library
ii libcupsimage2:amd64 2.4.1op1-1ubuntu4.1 amd64 Common UNIX Printing System(tm) - Raster image library
ii printer-driver-hpcups 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii python3-cups:amd64 2.0.1-5build1 amd64 Python3 bindings for CUPS
ii python3-cupshelpers 1.5.16-0ubuntu3 all Python utility modules around the CUPS printing systemb)
ubuntu@ubuntu-NUC7i3BNH:~$ lpstat -t
scheduler is running
system default destination: Deskjet_2540
matériel pour Deskjet_2540 : hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604
matériel pour Deskjet_2540_series_D8D040_USB : implicitclass://Deskjet_2540_series_D8D040_USB/
Deskjet_2540 accepte des requêtes depuis mer. 17 août 2022 13:55:55
Deskjet_2540_series_D8D040_USB accepte des requêtes depuis mer. 17 août 2022 13:44:03
printer Deskjet_2540 is idle. enabled since mer. 17 août 2022 13:55:55
printer Deskjet_2540_series_D8D040_USB is idle. enabled since mer. 17 août 2022 13:44:03c)
ubuntu@ubuntu-NUC7i3BNH:~$ /usr/sbin/lpinfo -v
file cups-brf:/
network beh
network ipp
network lpd
network https
direct hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604
network http
network ipps
network socket
direct hpfax
network ipp://Deskjet%202540%20series%20%5BD8D040%5D%20(USB)._ipp._tcp.local/d)
ubuntu@ubuntu-NUC7i3BNH:~$ cat /var/log/cups/error_log
W [17/Aug/2022:03:09:12 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [17/Aug/2022:10:28:38 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [17/Aug/2022:10:32:08 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [17/Aug/2022:10:43:14 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-Gray..\' already exists
W [17/Aug/2022:10:43:14 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-RGB..\' already exists
W [17/Aug/2022:13:09:17 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-Gray..\' already exists
W [17/Aug/2022:13:09:17 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-DeviceN..\' already exists
W [17/Aug/2022:13:15:24 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-Gray..\' already exists
W [17/Aug/2022:13:15:24 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-RGB..\' already exists
W [17/Aug/2022:13:20:45 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-Gray..\' already exists
W [17/Aug/2022:13:20:45 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-RGB..\' already exists
W [17/Aug/2022:13:27:01 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-Gray..\' already exists
W [17/Aug/2022:13:27:01 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-RGB..\' already exists
W [17/Aug/2022:13:28:56 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-Gray..\' already exists
W [17/Aug/2022:13:28:56 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540-RGB..\' already exists
E [17/Aug/2022:13:36:32 +0200] [Job 542] Stopping unresponsive job.
W [17/Aug/2022:13:41:08 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [17/Aug/2022:13:44:03 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-Gray..\' already exists
W [17/Aug/2022:13:44:03 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-DeviceN..\' already exists
E [17/Aug/2022:13:46:29 +0200] Scheduler shutting down due to program error.
I [17/Aug/2022:13:47:32 +0200] Listening to [v1.::1]:631 (IPv6)
I [17/Aug/2022:13:47:32 +0200] Listening to 127.0.0.1:631 (IPv4)
I [17/Aug/2022:13:47:32 +0200] Listening to /run/cups/cups.sock (Domain)
E [17/Aug/2022:13:47:32 +0200] Unknown directive JobPrivateAccess on line 123 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:47:32 +0200] Unknown directive JobPrivateValues on line 124 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:47:32 +0200] Unknown directive SubscriptionPrivateAccess on line 125 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:47:32 +0200] Unknown directive SubscriptionPrivateValues on line 126 of /etc/cups/cupsd.conf.
I [17/Aug/2022:13:47:32 +0200] Remote access is disabled.
D [17/Aug/2022:13:47:32 +0200] Added auto ServerAlias ubuntu-NUC7i3BNH
I [17/Aug/2022:13:47:32 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
D [17/Aug/2022:13:47:32 +0200] Using keychain "/etc/cups/ssl" for server name "ubuntu-NUC7i3BNH".
I [17/Aug/2022:13:47:32 +0200] Using default TempDir of /var/spool/cups/tmp...
I [17/Aug/2022:13:47:32 +0200] Configured for up to 100 clients.
I [17/Aug/2022:13:47:32 +0200] Allowing up to 100 client connections per host.
I [17/Aug/2022:13:47:32 +0200] Using policy "default" as the default.
I [17/Aug/2022:13:47:32 +0200] Full reload is required.
I [17/Aug/2022:13:47:32 +0200] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [17/Aug/2022:13:47:32 +0200] Loading printer Deskjet_2540...
D [17/Aug/2022:13:47:32 +0200] load_ppd: Loading /var/cache/cups/Deskjet_2540.data...
D [17/Aug/2022:13:47:32 +0200] Deskjet_2540: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [17/Aug/2022:13:47:32 +0200] cupsdRegisterPrinter(p=0x564afcfe79e0(Deskjet_2540))
D [17/Aug/2022:13:47:32 +0200] Queue Deskjet_2540 uses a printer driver, which is deprecated.
D [17/Aug/2022:13:47:32 +0200] Loading printer Deskjet_2540_series_D8D040_USB...
D [17/Aug/2022:13:47:32 +0200] load_ppd: Loading /var/cache/cups/Deskjet_2540_series_D8D040_USB.data...
D [17/Aug/2022:13:47:32 +0200] Deskjet_2540_series_D8D040_USB: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [17/Aug/2022:13:47:32 +0200] cupsdRegisterPrinter(p=0x564afcfd8940(Deskjet_2540_series_D8D040_USB))
W [17/Aug/2022:13:47:32 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
I [17/Aug/2022:13:47:32 +0200] Loading job cache file "/var/cache/cups/job.cache"...
D [17/Aug/2022:13:47:32 +0200] [Job 542] Loading from cache...
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
I [17/Aug/2022:13:47:32 +0200] Full reload complete.
D [17/Aug/2022:13:47:32 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [17/Aug/2022:13:47:32 +0200] Cleaning out old files in "/var/spool/cups/tmp".
D [17/Aug/2022:13:47:32 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp/.hplip", pattern="(null)")
I [17/Aug/2022:13:47:32 +0200] Cleaning out old files in "/var/spool/cups/tmp/.hplip".
D [17/Aug/2022:13:47:32 +0200] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [17/Aug/2022:13:47:32 +0200] Cleaning out old files in "/var/cache/cups".
D [17/Aug/2022:13:47:32 +0200] service_checkin: pid=3802
D [17/Aug/2022:13:47:32 +0200] service_checkin: 1 listeners.
D [17/Aug/2022:13:47:32 +0200] service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] service_add_listener: Matched existing listener #1 to /run/cups/cups.sock.
D [17/Aug/2022:13:47:32 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [17/Aug/2022:13:47:32 +0200] Calling FindDeviceById(cups-Deskjet_2540)
D [17/Aug/2022:13:47:32 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Deskjet_2540\' does not exist
D [17/Aug/2022:13:47:32 +0200] Using profile ID "Deskjet_2540-Gray..".
D [17/Aug/2022:13:47:32 +0200] Calling CreateProfile(Deskjet_2540-Gray..,temp)
D [17/Aug/2022:13:47:32 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Deskjet_2540_Gray__".
D [17/Aug/2022:13:47:32 +0200] Using profile ID "Deskjet_2540-RGB..".
D [17/Aug/2022:13:47:32 +0200] Calling CreateProfile(Deskjet_2540-RGB..,temp)
D [17/Aug/2022:13:47:32 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Deskjet_2540_RGB__".
I [17/Aug/2022:13:47:32 +0200] Registering ICC color profiles for "Deskjet_2540".
D [17/Aug/2022:13:47:32 +0200] Calling CreateDevice(cups-Deskjet_2540,temp)
D [17/Aug/2022:13:47:32 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_Deskjet_2540".
D [17/Aug/2022:13:47:32 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Deskjet_2540:AddProfile(/org/freedesktop/ColorManager/profiles/Deskjet_2540_Gray__) [soft]
D [17/Aug/2022:13:47:32 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Deskjet_2540:AddProfile(/org/freedesktop/ColorManager/profiles/Deskjet_2540_RGB__) [soft]
D [17/Aug/2022:13:47:32 +0200] Calling FindDeviceById(cups-Deskjet_2540_series_D8D040_USB)
D [17/Aug/2022:13:47:32 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Deskjet_2540_series_D8D040_USB\' does not exist
D [17/Aug/2022:13:47:32 +0200] Using profile ID "Deskjet_2540_series_D8D040_USB-Gray..".
D [17/Aug/2022:13:47:32 +0200] Calling CreateProfile(Deskjet_2540_series_D8D040_USB-Gray..,temp)
D [17/Aug/2022:13:47:32 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Deskjet_2540_series_D8D040_USB_Gray__".
D [17/Aug/2022:13:47:32 +0200] Using profile ID "Deskjet_2540_series_D8D040_USB-DeviceN..".
D [17/Aug/2022:13:47:32 +0200] Calling CreateProfile(Deskjet_2540_series_D8D040_USB-DeviceN..,temp)
D [17/Aug/2022:13:47:32 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Deskjet_2540_series_D8D040_USB_DeviceN__".
I [17/Aug/2022:13:47:32 +0200] Registering ICC color profiles for "Deskjet_2540_series_D8D040_USB".
D [17/Aug/2022:13:47:32 +0200] Calling CreateDevice(cups-Deskjet_2540_series_D8D040_USB,temp)
D [17/Aug/2022:13:47:32 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_Deskjet_2540_series_D8D040_USB".
D [17/Aug/2022:13:47:32 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Deskjet_2540_series_D8D040_USB:AddProfile(/org/freedesktop/ColorManager/profiles/Deskjet_2540_series_D8D040_USB_Gray__) [soft]
D [17/Aug/2022:13:47:32 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Deskjet_2540_series_D8D040_USB:AddProfile(/org/freedesktop/ColorManager/profiles/Deskjet_2540_series_D8D040_USB_DeviceN__) [soft]
I [17/Aug/2022:13:47:32 +0200] Listening to [v1.::1]:631 on fd 7...
I [17/Aug/2022:13:47:32 +0200] Listening to 127.0.0.1:631 on fd 8...
I [17/Aug/2022:13:47:32 +0200] Listening to /run/cups/cups.sock on fd 3...
I [17/Aug/2022:13:47:32 +0200] Resuming new connection processing...
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [17/Aug/2022:13:47:32 +0200] cupsdAddCert: Adding certificate for PID 0
D [17/Aug/2022:13:47:32 +0200] Notifier dbus started - PID = 3806
D [17/Aug/2022:13:47:32 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 1] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] [Client 1] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:32 +0200] [Client 1] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] Report: clients=1
D [17/Aug/2022:13:47:32 +0200] Report: jobs=1
D [17/Aug/2022:13:47:32 +0200] Report: jobs-active=0
D [17/Aug/2022:13:47:32 +0200] Report: printers=2
D [17/Aug/2022:13:47:32 +0200] Report: stringpool-string-count=1284
D [17/Aug/2022:13:47:32 +0200] Report: stringpool-alloc-bytes=11112
D [17/Aug/2022:13:47:32 +0200] Report: stringpool-total-bytes=24736
D [17/Aug/2022:13:47:32 +0200] [Client 1] GET /admin/log/error_log HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 1] Read: status=200, state=3
D [17/Aug/2022:13:47:32 +0200] [Client 1] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] cupsdIsAuthorized: username=""
D [17/Aug/2022:13:47:32 +0200] [Client 1] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 1] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [17/Aug/2022:13:47:32 +0200] [Client 1] Closing connection.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 2] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] [Client 2] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:32 +0200] [Client 2] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 3] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] [Client 3] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:32 +0200] [Client 3] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:32 +0200] [Client 2] Closing connection.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 4] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] [Client 4] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:32 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:32 +0200] [Client 3] Closing connection.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 4] GET /admin/log/error_log HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 4] Read: status=200, state=3
D [17/Aug/2022:13:47:32 +0200] [Client 4] Authorized as root using Local.
D [17/Aug/2022:13:47:32 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:47:32 +0200] [Client 4] AppArmor profile is 'unconfined'.
D [17/Aug/2022:13:47:32 +0200] [Client 4] Not a snap - allowed.
D [17/Aug/2022:13:47:32 +0200] [Client 4] Processing GET /admin/log/error_log
D [17/Aug/2022:13:47:32 +0200] [Client 4] filename="/var/log/cups/error_log", type=text/plain
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 4] Sending file.
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:32 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=14550, response=(nil)(), pipe_pid=0, file=16
D [17/Aug/2022:13:47:32 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:32 +0200] [Notifier] Connected to D-BUS
D [17/Aug/2022:13:47:32 +0200] [Notifier] ServerStarted
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] [Client 5] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:32 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] [Client 5] POST / HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 5] 2.0 Create-Printer-Subscriptions 1
D [17/Aug/2022:13:47:32 +0200] Create-Printer-Subscriptions /
D [17/Aug/2022:13:47:32 +0200] create_subscriptions(con=0x564afd0558d0(5), uri="/")
D [17/Aug/2022:13:47:32 +0200] pullmethod="ippget"
D [17/Aug/2022:13:47:32 +0200] notify-lease-duration=86400
D [17/Aug/2022:13:47:32 +0200] notify-time-interval=60
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:32 +0200] Added subscription #7602 for server.
D [17/Aug/2022:13:47:32 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 5] Content-Length: 107
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x564afd045e50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] bytes=0, http_state=0, data_remaining=107
D [17/Aug/2022:13:47:32 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 6] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:32 +0200] [Client 6] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:32 +0200] [Client 6] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] [Client 6] POST / HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 6] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 6] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 6] 2.0 CUPS-Get-Default 2
D [17/Aug/2022:13:47:32 +0200] CUPS-Get-Default
D [17/Aug/2022:13:47:32 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 6] Content-Length: 11424
D [17/Aug/2022:13:47:32 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 6] con->http=0x564afd05b3b0
D [17/Aug/2022:13:47:32 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11424, response=0x564afd03cfd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 6] bytes=0, http_state=0, data_remaining=11424
D [17/Aug/2022:13:47:32 +0200] [Client 6] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 6] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 6] POST / HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 6] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 6] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 6] 2.0 CUPS-Get-Printers 3
D [17/Aug/2022:13:47:32 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:47:32 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 6] Content-Length: 2983
D [17/Aug/2022:13:47:32 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 6] con->http=0x564afd05b3b0
D [17/Aug/2022:13:47:32 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2983, response=0x564afd033900(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 6] bytes=0, http_state=0, data_remaining=2983
D [17/Aug/2022:13:47:32 +0200] [Client 6] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 6] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] POST /printers/Deskjet_2540 HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 5] 2.0 Get-Printer-Attributes 4
D [17/Aug/2022:13:47:32 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:47:32 +0200] [Client 5] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 5] Content-Length: 138
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x564afd045dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] bytes=0, http_state=0, data_remaining=138
D [17/Aug/2022:13:47:32 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 5] 2.0 Get-Printer-Attributes 5
D [17/Aug/2022:13:47:32 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:32 +0200] [Client 5] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 5] Content-Length: 138
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x564afd03cfd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] bytes=0, http_state=0, data_remaining=138
D [17/Aug/2022:13:47:32 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] POST / HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 5] 2.0 CUPS-Get-Default 6
D [17/Aug/2022:13:47:32 +0200] CUPS-Get-Default
D [17/Aug/2022:13:47:32 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 5] Content-Length: 11424
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11424, response=0x564afd045dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] bytes=0, http_state=0, data_remaining=11424
D [17/Aug/2022:13:47:32 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] POST / HTTP/1.1
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:32 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:32 +0200] [Client 5] 2.0 Create-Printer-Subscriptions 7
D [17/Aug/2022:13:47:32 +0200] Create-Printer-Subscriptions /
D [17/Aug/2022:13:47:32 +0200] create_subscriptions(con=0x564afd0558d0(5), uri="/")
D [17/Aug/2022:13:47:32 +0200] recipient="dbus://"
D [17/Aug/2022:13:47:32 +0200] notify-lease-duration=86400
D [17/Aug/2022:13:47:32 +0200] notify-time-interval=0
D [17/Aug/2022:13:47:32 +0200] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [17/Aug/2022:13:47:32 +0200] Added subscription #7603 for server.
D [17/Aug/2022:13:47:32 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:32 +0200] [Client 5] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [17/Aug/2022:13:47:32 +0200] [Client 5] Content-Length: 107
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:32 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x564afd045e50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:32 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:32 +0200] [Client 5] bytes=0, http_state=0, data_remaining=107
D [17/Aug/2022:13:47:32 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:32 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:32 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:33 +0200] [Client 5] POST / HTTP/1.1
D [17/Aug/2022:13:47:33 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:33 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:33 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:33 +0200] [Client 5] 2.0 Get-Notifications 8
D [17/Aug/2022:13:47:33 +0200] Get-Notifications /
D [17/Aug/2022:13:47:33 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:47:33 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:47:33 +0200] [Client 5] Content-Length: 127
D [17/Aug/2022:13:47:33 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:47:33 +0200] Expiring subscriptions...
D [17/Aug/2022:13:47:33 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:33 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd045dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:33 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:33 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:33 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:33 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:33 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:33 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:33 +0200] [Client 5] POST / HTTP/1.1
D [17/Aug/2022:13:47:33 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:33 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:33 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:33 +0200] [Client 5] 2.0 Get-Notifications 9
D [17/Aug/2022:13:47:33 +0200] Get-Notifications /
D [17/Aug/2022:13:47:33 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:47:33 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:47:33 +0200] [Client 5] Content-Length: 127
D [17/Aug/2022:13:47:33 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:33 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:33 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd045e50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:33 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:33 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:33 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:33 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:33 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:33 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 5] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 5] 2.0 Get-Printer-Attributes 10
D [17/Aug/2022:13:47:34 +0200] Get-Printer-Attributes ipp://localhost:631/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:34 +0200] [Client 5] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 5] Content-Length: 1638
D [17/Aug/2022:13:47:34 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:47:34 +0200] Expiring subscriptions...
D [17/Aug/2022:13:47:34 +0200] [Client 5] con->http=0x564afd056a90
D [17/Aug/2022:13:47:34 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1638, response=0x564afd03fa90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 5] bytes=0, http_state=0, data_remaining=1638
D [17/Aug/2022:13:47:34 +0200] [Client 5] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 5] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 5] POST /admin/ HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 5] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 5] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 5] 2.0 CUPS-Add-Modify-Printer 11
D [17/Aug/2022:13:47:34 +0200] CUPS-Add-Modify-Printer ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:34 +0200] cupsdIsAuthorized: username=""
D [17/Aug/2022:13:47:34 +0200] [Client 5] Returning HTTP Non autorisé for CUPS-Add-Modify-Printer (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost
D [17/Aug/2022:13:47:34 +0200] [Client 5] cupsdSendHeader: code=401, type="text/html", auth_type=1
D [17/Aug/2022:13:47:34 +0200] [Client 5] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [17/Aug/2022:13:47:34 +0200] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:34 +0200] [Client 5] Closing connection.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 7] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:34 +0200] [Client 7] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:34 +0200] [Client 7] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 8] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:34 +0200] [Client 8] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:34 +0200] [Client 8] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:34 +0200] [Client 7] Closing connection.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 9] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:34 +0200] [Client 9] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:34 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:34 +0200] [Client 8] Closing connection.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 9] POST /admin/ HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:34 +0200] [Client 9] 2.0 CUPS-Add-Modify-Printer 11
D [17/Aug/2022:13:47:34 +0200] CUPS-Add-Modify-Printer ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:34 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:47:34 +0200] [Client 9] AppArmor profile is '/usr/sbin/cups-browsed'.
D [17/Aug/2022:13:47:34 +0200] [Client 9] Not a snap - allowed.
I [17/Aug/2022:13:47:34 +0200] Setting Deskjet_2540_series_D8D040_USB printer-is-shared to 1 (was 0.)
D [17/Aug/2022:13:47:34 +0200] Setting cups-browsed-default to true...
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(P----)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] load_ppd: Loading /var/cache/cups/Deskjet_2540_series_D8D040_USB.data...
D [17/Aug/2022:13:47:34 +0200] Deskjet_2540_series_D8D040_USB: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [17/Aug/2022:13:47:34 +0200] cupsdRegisterPrinter(p=0x564afcfd8940(Deskjet_2540_series_D8D040_USB))
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(--p--)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] Notifier dbus started - PID = 3810
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:34 +0200] Printer "Deskjet_2540_series_D8D040_USB" modified by "root".
D [17/Aug/2022:13:47:34 +0200] [Client 9] Returning IPP successful-ok for CUPS-Add-Modify-Printer (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 9] Content-Length: 75
D [17/Aug/2022:13:47:34 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:34 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd031d80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 9] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:34 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:34 +0200] [Notifier] PrinterModified
D [17/Aug/2022:13:47:34 +0200] [Client 9] POST /admin/ HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:34 +0200] [Client 9] 2.0 CUPS-Add-Modify-Printer 12
D [17/Aug/2022:13:47:34 +0200] CUPS-Add-Modify-Printer ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:34 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:47:34 +0200] [Client 9] AppArmor profile is '/usr/sbin/cups-browsed'.
D [17/Aug/2022:13:47:34 +0200] [Client 9] Not a snap - allowed.
D [17/Aug/2022:13:47:34 +0200] cupsdDeregisterPrinter(p=0x564afcfd8940(Deskjet_2540_series_D8D040_USB), removeit=1)
I [17/Aug/2022:13:47:34 +0200] Setting Deskjet_2540_series_D8D040_USB printer-is-shared to 0 (was 1.)
D [17/Aug/2022:13:47:34 +0200] Setting cups-browsed-default to true...
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(P----)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] load_ppd: Loading /var/cache/cups/Deskjet_2540_series_D8D040_USB.data...
D [17/Aug/2022:13:47:34 +0200] Deskjet_2540_series_D8D040_USB: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [17/Aug/2022:13:47:34 +0200] cupsdRegisterPrinter(p=0x564afcfd8940(Deskjet_2540_series_D8D040_USB))
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(--p--)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:34 +0200] Printer "Deskjet_2540_series_D8D040_USB" modified by "root".
D [17/Aug/2022:13:47:34 +0200] [Client 9] Returning IPP successful-ok for CUPS-Add-Modify-Printer (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 9] Content-Length: 75
D [17/Aug/2022:13:47:34 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:34 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd031d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 9] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:34 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 10] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:34 +0200] [Client 10] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:34 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:34 +0200] [Notifier] PrinterModified
D [17/Aug/2022:13:47:34 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 10] 2.0 Get-Notifications 14
D [17/Aug/2022:13:47:34 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:47:34 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:47:34 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:47:34 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:47:34 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd064a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:34 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 10] 2.0 Get-Notifications 15
D [17/Aug/2022:13:47:34 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:47:34 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:47:34 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:47:34 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:47:34 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd031d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:34 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:34 +0200] [Notifier] Connected to D-BUS
D [17/Aug/2022:13:47:34 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:34 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 4] 2.0 Get-Jobs 35
D [17/Aug/2022:13:47:34 +0200] Get-Jobs ipp://localhost/printers/
D [17/Aug/2022:13:47:34 +0200] [Client 4] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 4] Content-Length: 75
D [17/Aug/2022:13:47:34 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:34 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd045e90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 4] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:34 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 4] 2.0 Get-Jobs 36
D [17/Aug/2022:13:47:34 +0200] Get-Jobs ipp://localhost/printers/
I [17/Aug/2022:13:47:34 +0200] [Client 4] Limiting Get-Jobs response to 500 jobs.
D [17/Aug/2022:13:47:34 +0200] [Job 542] Loading attributes...
D [17/Aug/2022:13:47:34 +0200] [Client 4] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 4] Content-Length: 180
D [17/Aug/2022:13:47:34 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:34 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=180, response=0x564afd031d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 4] bytes=0, http_state=0, data_remaining=180
D [17/Aug/2022:13:47:34 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 4] 2.0 Create-Printer-Subscriptions 37
D [17/Aug/2022:13:47:34 +0200] Create-Printer-Subscriptions /
D [17/Aug/2022:13:47:34 +0200] create_subscriptions(con=0x564afd04a980(4), uri="/")
D [17/Aug/2022:13:47:34 +0200] pullmethod="ippget"
D [17/Aug/2022:13:47:34 +0200] notify-lease-duration=86400
D [17/Aug/2022:13:47:34 +0200] notify-time-interval=0
D [17/Aug/2022:13:47:34 +0200] cupsdAddSubscription(mask=17800, dest=(nil)(), job=(nil)(0), uri="(null)")
D [17/Aug/2022:13:47:34 +0200] Added subscription #7604 for server.
D [17/Aug/2022:13:47:34 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 4] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 4] Content-Length: 107
D [17/Aug/2022:13:47:34 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:34 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x564afd064fb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 4] bytes=0, http_state=0, data_remaining=107
D [17/Aug/2022:13:47:34 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 11] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:34 +0200] [Client 11] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:34 +0200] [Client 11] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] [Client 11] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 11] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 11] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 11] 2.0 Get-Notifications 38
D [17/Aug/2022:13:47:34 +0200] Get-Notifications /
D [17/Aug/2022:13:47:34 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:47:34 +0200] [Client 11] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 11] Content-Length: 1085
D [17/Aug/2022:13:47:34 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 11] con->http=0x564afd067c00
D [17/Aug/2022:13:47:34 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1085, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 11] bytes=0, http_state=0, data_remaining=1085
D [17/Aug/2022:13:47:34 +0200] [Client 11] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 11] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 11] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:34 +0200] [Client 11] Closing connection.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 12] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:34 +0200] [Client 12] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:34 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 12] 2.0 CUPS-Get-Printers 39
D [17/Aug/2022:13:47:34 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:47:34 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 12] Content-Length: 971
D [17/Aug/2022:13:47:34 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:47:34 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=971, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 12] bytes=0, http_state=0, data_remaining=971
D [17/Aug/2022:13:47:34 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 12] 2.0 CUPS-Get-Classes 40
D [17/Aug/2022:13:47:34 +0200] CUPS-Get-Classes
D [17/Aug/2022:13:47:34 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 12] Content-Length: 75
D [17/Aug/2022:13:47:34 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:47:34 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd064fb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 12] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:34 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:34 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:47:34 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:47:34 +0200] [Client 12] 2.0 CUPS-Get-Default 41
D [17/Aug/2022:13:47:34 +0200] CUPS-Get-Default
D [17/Aug/2022:13:47:34 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:47:34 +0200] [Client 12] Content-Length: 11424
D [17/Aug/2022:13:47:34 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:34 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:47:34 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11424, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:34 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:34 +0200] [Client 12] bytes=0, http_state=0, data_remaining=11424
D [17/Aug/2022:13:47:34 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:47:34 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:34 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:34 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:35 +0200] Expiring subscriptions...
D [17/Aug/2022:13:47:36 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:47:36 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:36 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:47:36 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:47:36 +0200] [Client 4] 2.0 Get-Notifications 42
D [17/Aug/2022:13:47:36 +0200] Get-Notifications /
D [17/Aug/2022:13:47:36 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:47:36 +0200] [Client 4] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:47:36 +0200] [Client 4] Content-Length: 127
D [17/Aug/2022:13:47:36 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:47:36 +0200] Expiring subscriptions...
D [17/Aug/2022:13:47:36 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:36 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd064fb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:36 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:36 +0200] [Client 4] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:36 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:47:36 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:36 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:36 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:37 +0200] Expiring subscriptions...
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /admin/ HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 CUPS-Add-Modify-Printer 14
D [17/Aug/2022:13:47:38 +0200] CUPS-Add-Modify-Printer ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:47:38 +0200] [Client 9] AppArmor profile is '/usr/sbin/cups-browsed'.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Not a snap - allowed.
D [17/Aug/2022:13:47:38 +0200] Deskjet_2540_series_D8D040_USB device-uri: Unknown scheme in URI
I [17/Aug/2022:13:47:38 +0200] Setting Deskjet_2540_series_D8D040_USB device-uri to "implicitclass://Deskjet_2540_series_D8D040_USB/" (was "implicitclass://Deskjet_2540_series_D8D040_USB/".)
I [17/Aug/2022:13:47:38 +0200] Setting Deskjet_2540_series_D8D040_USB printer-state to 3 (was 3.)
D [17/Aug/2022:13:47:38 +0200] Setting copies-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting cups-browsed-default to true...
D [17/Aug/2022:13:47:38 +0200] Setting finishings-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting job-cancel-after-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting job-hold-until-default to "no-hold"...
D [17/Aug/2022:13:47:38 +0200] Setting job-k-limit to 0...
D [17/Aug/2022:13:47:38 +0200] Setting job-page-limit to 0...
D [17/Aug/2022:13:47:38 +0200] Setting job-priority-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting job-quota-period to 0...
D [17/Aug/2022:13:47:38 +0200] Setting media-default to "iso_a4_210x297mm"...
D [17/Aug/2022:13:47:38 +0200] Setting notify-events-default to "job-completed"...
D [17/Aug/2022:13:47:38 +0200] Setting notify-lease-duration-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting number-up-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting orientation-requested-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting output-bin-default to "face-up"...
D [17/Aug/2022:13:47:38 +0200] Setting print-color-mode-default to "color"...
D [17/Aug/2022:13:47:38 +0200] Setting print-quality-default to (...
D [17/Aug/2022:13:47:38 +0200] Setting printer-error-policy to "retry-job"...
D [17/Aug/2022:13:47:38 +0200] Setting printer-op-policy to "default"...
D [17/Aug/2022:13:47:38 +0200] Setting printer-resolution-default to 600x600dpi...
D [17/Aug/2022:13:47:38 +0200] Setting sides-default to "one-sided"...
D [17/Aug/2022:13:47:38 +0200] Copied PPD file successfully
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(P----)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] Calling FindDeviceById(cups-Deskjet_2540_series_D8D040_USB)
D [17/Aug/2022:13:47:38 +0200] Calling DeleteDevice(/org/freedesktop/ColorManager/devices/cups_Deskjet_2540_series_D8D040_USB)
D [17/Aug/2022:13:47:38 +0200] Using profile ID "Deskjet_2540_series_D8D040_USB-Gray..".
D [17/Aug/2022:13:47:38 +0200] Calling CreateProfile(Deskjet_2540_series_D8D040_USB-Gray..,temp)
W [17/Aug/2022:13:47:38 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-Gray..\' already exists
D [17/Aug/2022:13:47:38 +0200] Using profile ID "Deskjet_2540_series_D8D040_USB-DeviceN..".
D [17/Aug/2022:13:47:38 +0200] Calling CreateProfile(Deskjet_2540_series_D8D040_USB-DeviceN..,temp)
W [17/Aug/2022:13:47:38 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-DeviceN..\' already exists
I [17/Aug/2022:13:47:38 +0200] Registering ICC color profiles for "Deskjet_2540_series_D8D040_USB".
D [17/Aug/2022:13:47:38 +0200] Calling CreateDevice(cups-Deskjet_2540_series_D8D040_USB,temp)
D [17/Aug/2022:13:47:38 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_Deskjet_2540_series_D8D040_USB".
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(P----)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(P----)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] load_ppd: Loading /etc/cups/ppd/Deskjet_2540_series_D8D040_USB.ppd...
D [17/Aug/2022:13:47:38 +0200] load_ppd: Saving /var/cache/cups/Deskjet_2540_series_D8D040_USB.data...
D [17/Aug/2022:13:47:38 +0200] Deskjet_2540_series_D8D040_USB: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [17/Aug/2022:13:47:38 +0200] cupsdRegisterPrinter(p=0x564afcfd8940(Deskjet_2540_series_D8D040_USB))
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(--p--)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:38 +0200] Printer "Deskjet_2540_series_D8D040_USB" modified by "root".
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for CUPS-Add-Modify-Printer (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 75
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:47:38 +0200] Expiring subscriptions...
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd06baa0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:38 +0200] [Notifier] PrinterModified
D [17/Aug/2022:13:47:38 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /admin/ HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 CUPS-Add-Modify-Printer 15
D [17/Aug/2022:13:47:38 +0200] CUPS-Add-Modify-Printer ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:47:38 +0200] [Client 9] AppArmor profile is '/usr/sbin/cups-browsed'.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Not a snap - allowed.
I [17/Aug/2022:13:47:38 +0200] Setting Deskjet_2540_series_D8D040_USB printer-is-shared to 0 (was 0.)
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(P----)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] load_ppd: Loading /var/cache/cups/Deskjet_2540_series_D8D040_USB.data...
D [17/Aug/2022:13:47:38 +0200] Deskjet_2540_series_D8D040_USB: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [17/Aug/2022:13:47:38 +0200] cupsdRegisterPrinter(p=0x564afcfd8940(Deskjet_2540_series_D8D040_USB))
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(--p--)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:38 +0200] Printer "Deskjet_2540_series_D8D040_USB" modified by "root".
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for CUPS-Add-Modify-Printer (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 75
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd026be0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 10] 2.0 Get-Notifications 16
D [17/Aug/2022:13:47:38 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:47:38 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:47:38 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:47:38 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:38 +0200] [Notifier] PrinterModified
D [17/Aug/2022:13:47:38 +0200] [Notifier] state=3
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 CUPS-Get-Printers 16
D [17/Aug/2022:13:47:38 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 249
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:47:38 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd044870(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:38 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=249, response=0x564afd07bfc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=249
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 10] 2.0 Get-Notifications 17
D [17/Aug/2022:13:47:38 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:47:38 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:47:38 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:47:38 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:47:38 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd072940(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:38 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 CUPS-Get-Printers 17
D [17/Aug/2022:13:47:38 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 249
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=249, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=249
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 18
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 349
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=349, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=349
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] GET /printers/Deskjet_2540_series_D8D040_USB.ppd HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=3
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Processing GET /printers/Deskjet_2540_series_D8D040_USB.ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] filename="/etc/cups/ppd/Deskjet_2540_series_D8D040_USB.ppd", type=application/vnd.cups-ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] Sending file.
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 19
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11563, response=0x564afd064fb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 20
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 349
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=349, response=0x564afd031d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=349
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] GET /printers/Deskjet_2540_series_D8D040_USB.ppd HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=3
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Processing GET /printers/Deskjet_2540_series_D8D040_USB.ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] filename="/etc/cups/ppd/Deskjet_2540_series_D8D040_USB.ppd", type=application/vnd.cups-ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] Sending file.
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 21
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11563, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 22
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 349
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=349, response=0x564afd064fb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=349
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] GET /printers/Deskjet_2540_series_D8D040_USB.ppd HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=3
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Processing GET /printers/Deskjet_2540_series_D8D040_USB.ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] filename="/etc/cups/ppd/Deskjet_2540_series_D8D040_USB.ppd", type=application/vnd.cups-ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] Sending file.
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 23
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11563, response=0x564afd044870(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 24
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 349
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=349, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=349
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] GET /printers/Deskjet_2540_series_D8D040_USB.ppd HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=3
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Processing GET /printers/Deskjet_2540_series_D8D040_USB.ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] filename="/etc/cups/ppd/Deskjet_2540_series_D8D040_USB.ppd", type=application/vnd.cups-ppd
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] Sending file.
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12065, response=(nil)(), pipe_pid=0, file=21
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] POST /printers/Deskjet_2540_series_D8D040_USB HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 9] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 9] Authorized as root using PeerCred.
D [17/Aug/2022:13:47:38 +0200] [Client 9] 2.0 Get-Printer-Attributes 25
D [17/Aug/2022:13:47:38 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:47:38 +0200] [Client 9] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 9] Content-Length: 11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] con->http=0x564afd056a90
D [17/Aug/2022:13:47:38 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11563, response=0x564afd031d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 9] bytes=0, http_state=0, data_remaining=11563
D [17/Aug/2022:13:47:38 +0200] [Client 9] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 9] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 13] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:47:38 +0200] [Client 13] Accepted from localhost (Domain)
D [17/Aug/2022:13:47:38 +0200] [Client 13] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] [Client 13] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 13] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 13] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 13] 2.0 Get-Notifications 43
D [17/Aug/2022:13:47:38 +0200] Get-Notifications /
D [17/Aug/2022:13:47:38 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:47:38 +0200] [Client 13] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 13] Content-Length: 1085
D [17/Aug/2022:13:47:38 +0200] [Client 13] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 13] con->http=0x564afd07c4c0
D [17/Aug/2022:13:47:38 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1085, response=0x564afd026be0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 13] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 13] bytes=0, http_state=0, data_remaining=1085
D [17/Aug/2022:13:47:38 +0200] [Client 13] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 13] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 13] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:47:38 +0200] [Client 13] Closing connection.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 4] 2.0 Get-Notifications 44
D [17/Aug/2022:13:47:38 +0200] Get-Notifications /
D [17/Aug/2022:13:47:38 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:47:38 +0200] [Client 4] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 4] Content-Length: 127
D [17/Aug/2022:13:47:38 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:47:38 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd04c450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 4] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:47:38 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 12] 2.0 CUPS-Get-Printers 45
D [17/Aug/2022:13:47:38 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:47:38 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 12] Content-Length: 971
D [17/Aug/2022:13:47:38 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:47:38 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=971, response=0x564afd072970(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 12] bytes=0, http_state=0, data_remaining=971
D [17/Aug/2022:13:47:38 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 12] 2.0 CUPS-Get-Classes 46
D [17/Aug/2022:13:47:38 +0200] CUPS-Get-Classes
D [17/Aug/2022:13:47:38 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 12] Content-Length: 75
D [17/Aug/2022:13:47:38 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:47:38 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd064fb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 12] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:47:38 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:47:38 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:47:38 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:47:38 +0200] [Client 12] 2.0 CUPS-Get-Default 47
D [17/Aug/2022:13:47:38 +0200] CUPS-Get-Default
D [17/Aug/2022:13:47:38 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:47:38 +0200] [Client 12] Content-Length: 11424
D [17/Aug/2022:13:47:38 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:47:38 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:47:38 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11424, response=0x564afd072970(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:47:38 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:47:38 +0200] [Client 12] bytes=0, http_state=0, data_remaining=11424
D [17/Aug/2022:13:47:38 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:47:38 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:47:38 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:47:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:47:39 +0200] Expiring subscriptions...
I [17/Aug/2022:13:48:03 +0200] Saving printers.conf...
I [17/Aug/2022:13:48:03 +0200] Generating printcap /run/cups/printcap...
I [17/Aug/2022:13:48:03 +0200] Saving subscriptions.conf...
D [17/Aug/2022:13:48:03 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [17/Aug/2022:13:48:03 +0200] Expiring subscriptions...
D [17/Aug/2022:13:48:39 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:48:39 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [17/Aug/2022:13:48:39 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:48:39 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:48:39 +0200] [Client 4] 2.0 Get-Notifications 48
D [17/Aug/2022:13:48:39 +0200] Get-Notifications /
D [17/Aug/2022:13:48:39 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:48:39 +0200] [Client 4] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:48:39 +0200] [Client 4] Content-Length: 127
D [17/Aug/2022:13:48:39 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:48:39 +0200] Expiring subscriptions...
D [17/Aug/2022:13:48:39 +0200] [Job 542] Unloading...
D [17/Aug/2022:13:48:39 +0200] Report: clients=5
D [17/Aug/2022:13:48:39 +0200] Report: jobs=1
D [17/Aug/2022:13:48:39 +0200] Report: jobs-active=0
D [17/Aug/2022:13:48:39 +0200] Report: printers=2
D [17/Aug/2022:13:48:39 +0200] Report: stringpool-string-count=1679
D [17/Aug/2022:13:48:39 +0200] Report: stringpool-alloc-bytes=11592
D [17/Aug/2022:13:48:39 +0200] Report: stringpool-total-bytes=34280
D [17/Aug/2022:13:48:39 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:48:39 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd044870(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:39 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:39 +0200] [Client 4] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:48:39 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:48:39 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:39 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:48:39 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
I [17/Aug/2022:13:48:40 +0200] Expiring subscriptions...
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [17/Aug/2022:13:48:45 +0200] [Client 14] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 14] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 14] Waiting for request.
I [17/Aug/2022:13:48:45 +0200] Expiring subscriptions...
D [17/Aug/2022:13:48:45 +0200] [Client 14] POST /printers/Deskjet%5F2540 HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [17/Aug/2022:13:48:45 +0200] [Client 14] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 14] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 14] 2.0 Print-Job 49
D [17/Aug/2022:13:48:45 +0200] [Client 14] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] Print-Job ipp://localhost/printers/Deskjet%5F2540
D [17/Aug/2022:13:48:45 +0200] [Job ???] Auto-typing file...
I [17/Aug/2022:13:48:45 +0200] [Job ???] Request file type is application/vnd.cups-pdf-banner.
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [17/Aug/2022:13:48:45 +0200] [Job 543] Applying default options...
D [17/Aug/2022:13:48:45 +0200] add_job: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] Adding default job-sheets values "none,none"...
I [17/Aug/2022:13:48:45 +0200] [Job 543] Adding start banner page "none".
D [17/Aug/2022:13:48:45 +0200] Notifier dbus started - PID = 3817
D [17/Aug/2022:13:48:45 +0200] Notifier dbus started - PID = 3818
D [17/Aug/2022:13:48:45 +0200] Notifier dbus started - PID = 3819
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [17/Aug/2022:13:48:45 +0200] [Job 543] Adding end banner page "none".
I [17/Aug/2022:13:48:45 +0200] [Job 543] File of type application/vnd.cups-pdf-banner queued by "ubuntu".
D [17/Aug/2022:13:48:45 +0200] [Job 543] hold_until=0
I [17/Aug/2022:13:48:45 +0200] [Job 543] Queued on "Deskjet_2540" by "ubuntu".
D [17/Aug/2022:13:48:45 +0200] [Job 543] time-at-processing=1660736925
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] 4 filters for job:
D [17/Aug/2022:13:48:45 +0200] [Job 543] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [17/Aug/2022:13:48:45 +0200] [Job 543] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [17/Aug/2022:13:48:45 +0200] [Job 543] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [17/Aug/2022:13:48:45 +0200] [Job 543] hpcups (application/vnd.cups-raster to printer/Deskjet_2540, cost 0)
D [17/Aug/2022:13:48:45 +0200] [Job 543] job-sheets=none,none
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[0]="Deskjet_2540"
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[1]="543"
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[2]="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[3]="Test Page"
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[4]="1"
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[5]="job-uuid=urn:uuid:7fe96ae6-2012-356c-579f-38bc1314d3c5 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1660736925 time-at-processing=1660736925"
D [17/Aug/2022:13:48:45 +0200] [Job 543] argv[6]="/var/spool/cups/d00543-001"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[6]="CUPS_STATEDIR=/run/cups"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[7]="HOME=/var/spool/cups/tmp"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[9]="SERVER_ADMIN=root@ubuntu-NUC7i3BNH"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[10]="SOFTWARE=CUPS/2.4.1"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[12]="USER=root"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[13]="CUPS_MAX_MESSAGE=2047"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[16]="IPP_PORT=631"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[17]="CHARSET=utf-8"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[18]="LANG=fr_FR.UTF-8"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[19]="PPD=/etc/cups/ppd/Deskjet_2540.ppd"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[20]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[21]="DEVICE_URI=hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[22]="PRINTER_INFO=Deskjet 2540 Device (Automatically setup by HPLIP)"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[23]="PRINTER_LOCATION="
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[24]="PRINTER=Deskjet_2540"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[25]="PRINTER_STATE_REASONS=none"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[26]="CUPS_FILETYPE=document"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[28]="AUTH_I****"
I [17/Aug/2022:13:48:45 +0200] [Job 543] Started filter /usr/lib/cups/filter/bannertopdf (PID 3820)
I [17/Aug/2022:13:48:45 +0200] [Job 543] Started filter /usr/lib/cups/filter/pdftopdf (PID 3823)
I [17/Aug/2022:13:48:45 +0200] [Job 543] Started filter /usr/lib/cups/filter/gstoraster (PID 3824)
I [17/Aug/2022:13:48:45 +0200] [Job 543] Started filter /usr/lib/cups/filter/hpcups (PID 3825)
I [17/Aug/2022:13:48:45 +0200] [Job 543] Started backend /usr/lib/cups/backend/hp (PID 3826)
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 14] Returning IPP successful-ok for Print-Job (ipp://localhost/printers/Deskjet%5F2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 14] Content-Length: 193
D [17/Aug/2022:13:48:45 +0200] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 14] con->http=0x564afd07c4c0
D [17/Aug/2022:13:48:45 +0200] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=193, response=0x564afd026be0(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 14] bytes=0, http_state=0, data_remaining=193
D [17/Aug/2022:13:48:45 +0200] [Client 14] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 14] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 14] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] JobCreated
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] PrinterStateChanged
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] Connected to D-BUS
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] Connected to D-BUS
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] JobState
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 18
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 1609
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 15] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1609, response=0x564afd0822d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=1609
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 16] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 Get-Job-Attributes 33
D [17/Aug/2022:13:48:45 +0200] Get-Job-Attributes ipp://localhost/jobs/543
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/543) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 169
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 17] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 17] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 17] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=169, response=0x564afd0822d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=169
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 CUPS-Get-Default 34
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 11424
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11424, response=0x564afd082350(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=11424
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 17] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 17] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 17] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 17] 2.0 Get-Job-Attributes 19
D [17/Aug/2022:13:48:45 +0200] Get-Job-Attributes ipp://localhost/jobs/543
D [17/Aug/2022:13:48:45 +0200] [Client 17] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/543) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 17] Content-Length: 112
D [17/Aug/2022:13:48:45 +0200] [Client 17] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 17] con->http=0x564afd08d400
D [17/Aug/2022:13:48:45 +0200] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564afd082f80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 17] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 17] bytes=0, http_state=0, data_remaining=112
D [17/Aug/2022:13:48:45 +0200] [Client 17] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 17] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 17] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] Connected to D-BUS
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 Get-Jobs 35
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 391
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 17] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 17] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=391, response=0x564afd082350(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=391
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 18] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 18] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 18] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 18] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 18] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 18] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 18] 2.0 Get-Job-Attributes 20
D [17/Aug/2022:13:48:45 +0200] Get-Job-Attributes ipp://localhost/jobs/543
D [17/Aug/2022:13:48:45 +0200] [Client 18] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/543) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 18] Content-Length: 112
D [17/Aug/2022:13:48:45 +0200] [Client 18] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 18] con->http=0x564afd08d400
D [17/Aug/2022:13:48:45 +0200] [Client 18] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564afd082bc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 18] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 18] bytes=0, http_state=0, data_remaining=112
D [17/Aug/2022:13:48:45 +0200] [Client 18] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 18] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 18] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 18] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 18] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 CUPS-Get-Printers 36
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 2983
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2983, response=0x564afd082b80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=2983
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] STATE: -marker-supply-low-warning
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] pdftopdf: Last filter determined by the PPD: hpcups; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [17/Aug/2022:13:48:45 +0200] [Job 543] OUTFORMAT=\"<none>\", so output format will be CUPS/PWG Raster
D [17/Aug/2022:13:48:45 +0200] [Job 543] PDF template file doesn\'t have form. It\'s okay.
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 21
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd08ccb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 22
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd082b80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] PID 3820 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [17/Aug/2022:13:48:45 +0200] [Job 543] PDF interactive form and annotation flattening done via QPDF
D [17/Aug/2022:13:48:45 +0200] [Job 543] pdftopdf: \"print-scaling\" IPP attribute: auto
D [17/Aug/2022:13:48:45 +0200] [Job 543] pdftopdf: Print scaling mode: Do not scale, center, crop if needed
D [17/Aug/2022:13:48:45 +0200] [Job 543] After Cropping: 595.440002 841.679993 595.440002 841.679993
D [17/Aug/2022:13:48:45 +0200] [Job 543] PID 3823 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [17/Aug/2022:13:48:45 +0200] [Job 543] Color Manager: Calibration Mode/Off
D [17/Aug/2022:13:48:45 +0200] [Job 543] Calling FindDeviceById(cups-Deskjet_2540)
D [17/Aug/2022:13:48:45 +0200] [Job 543] Found device /org/freedesktop/ColorManager/devices/cups_Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Job 543] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 Get-Jobs 37
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 391
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=391, response=0x564afd082b80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=391
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 Get-Jobs 38
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 75
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Job 543] Calling FindDeviceById(cups-Deskjet_2540)
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd080ae0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] Found device /org/freedesktop/ColorManager/devices/cups_Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Job 543] Calling GetProfileForQualifiers(RGB.Plain....)
D [17/Aug/2022:13:48:45 +0200] [Job 543] Found profile /org/freedesktop/ColorManager/profiles/Deskjet_2540_RGB__
D [17/Aug/2022:13:48:45 +0200] [Job 543] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [17/Aug/2022:13:48:45 +0200] [Job 543] Failed to get profile filename for cups-Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Job 543] Color Manager: ICC Profile:
D [17/Aug/2022:13:48:45 +0200] [Job 543] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [17/Aug/2022:13:48:45 +0200] [Job 543] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Plain -sOutputType=0 -r600x300 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=841 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=17 -dcupsInteger0=26 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[9.000000 41.040001 9.000000 4.320007] /Margins[0 0]>>setpagedevice\' -f -_
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[3]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[4]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[5]=\"CUPS_SERVERROOT=/etc/cups\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[6]=\"CUPS_STATEDIR=/run/cups\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[7]=\"HOME=/var/spool/cups/tmp\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[8]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[9]=\"SERVER_ADMIN=root@ubuntu-NUC7i3BNH\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[10]=\"SOFTWARE=CUPS/2.4.1\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[11]=\"USER=root\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[12]=\"CUPS_MAX_MESSAGE=2047\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[13]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[14]=\"CUPS_ENCRYPTION=IfRequested\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[15]=\"IPP_PORT=631\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[16]=\"CHARSET=utf-8\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[17]=\"LANG=fr_FR.UTF-8\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[18]=\"PPD=/etc/cups/ppd/Deskjet_2540.ppd\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[19]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[20]=\"DEVICE_URI=hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[21]=\"PRINTER_INFO=Deskjet 2540 Device (Automatically setup by HPLIP)\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[22]=\"PRINTER_LOCATION=\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[23]=\"PRINTER=Deskjet_2540\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[24]=\"PRINTER_STATE_REASONS=none\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[25]=\"CUPS_FILETYPE=document\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[26]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [17/Aug/2022:13:48:45 +0200] [Job 543] envp[27]=\"AUTH_INFO_REQUIRED=none\"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 19] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 19] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 19] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 19] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 19] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 19] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 19] 2.0 Get-Notifications 50
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 19] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 19] Content-Length: 566
D [17/Aug/2022:13:48:45 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 19] con->http=0x564afd08d4f0
D [17/Aug/2022:13:48:45 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=566, response=0x564afd07aa70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 19] bytes=0, http_state=0, data_remaining=566
D [17/Aug/2022:13:48:45 +0200] [Client 19] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 19] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 19] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 19] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 4] 2.0 Get-Notifications 51
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:48:45 +0200] [Client 4] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 4] Content-Length: 1170
D [17/Aug/2022:13:48:45 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:48:45 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1170, response=0x564afd07aa70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 4] bytes=0, http_state=0, data_remaining=1170
D [17/Aug/2022:13:48:45 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] Start rendering...
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] Set job-printer-state-message to "Start rendering...", current level=INFO
D [17/Aug/2022:13:48:45 +0200] [Job 543] Processing page 1...
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] JobProgress
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] PrinterStateChanged
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 23
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 552
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=552, response=0x564afd08e580(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=552
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 CUPS-Get-Default 39
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 11444
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 CUPS-Get-Default 24
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 11444
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11444, response=0x564afd08e2f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=11444
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11444, response=0x564afd092460(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=11444
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 CUPS-Get-Printers 25
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 2983
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2983, response=0x564afd092390(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=2983
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 CUPS-Get-Printers 40
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 2983
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2983, response=0x564afd08e2f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=2983
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 26
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd092460(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=100, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 Get-Jobs 41
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 391
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=391, response=0x564afd08e2f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=391
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 Get-Jobs 42
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 75
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd092460(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 12] 2.0 CUPS-Get-Printers 52
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 12] Content-Length: 991
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=991, response=0x564afd08e2f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] bytes=0, http_state=0, data_remaining=991
D [17/Aug/2022:13:48:45 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 12] 2.0 CUPS-Get-Classes 53
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Classes
D [17/Aug/2022:13:48:45 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 12] Content-Length: 75
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd095220(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:48:45 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 12] 2.0 CUPS-Get-Default 54
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 12] Content-Length: 11444
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11444, response=0x564afd08e2f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] bytes=0, http_state=0, data_remaining=11444
D [17/Aug/2022:13:48:45 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 20] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 20] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 20] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 20] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 20] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 20] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 20] 2.0 Get-Notifications 55
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 20] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 20] Content-Length: 552
D [17/Aug/2022:13:48:45 +0200] [Client 20] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 20] con->http=0x564afd091f90
D [17/Aug/2022:13:48:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=552, response=0x564afd08ebb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 20] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 20] bytes=0, http_state=0, data_remaining=552
D [17/Aug/2022:13:48:45 +0200] [Client 20] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 20] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 20] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 20] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 20] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] STATE: +connecting-to-device
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] PAGE: 1 1\r
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] JobProgress
D [17/Aug/2022:13:48:45 +0200] [Notifier] state=3
D [17/Aug/2022:13:48:45 +0200] [Notifier] PrinterStateChanged
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 27
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 568
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=568, response=0x564afd091100(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=568
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 CUPS-Get-Default 28
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 11460
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11460, response=0x564afd090e90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=11460
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 CUPS-Get-Default 43
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 11460
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11460, response=0x564afd091e10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=11460
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 CUPS-Get-Printers 29
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 2999
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2999, response=0x564afd090e90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=2999
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Job 543] prnt/backend/hp.c 825: INFO: open device failed stat=21: hp:/usb/Deskjet_2540_series?serial=CN4753F3S50604; will retry in 30 seconds...
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 CUPS-Get-Printers 44
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 2999
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2999, response=0x564afd091100(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=2999
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST /printers/Deskjet_2540 HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Printer-Attributes 30
D [17/Aug/2022:13:48:45 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 139
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=139, response=0x564afd091e10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=139
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 15] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 15] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 15] 2.0 Get-Jobs 45
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Client 15] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 15] Content-Length: 391
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 16] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 16] 2.0 Get-Jobs 46
D [17/Aug/2022:13:48:45 +0200] Get-Jobs ipp://localhost/printers/Deskjet_2540_series_D8D040_USB
D [17/Aug/2022:13:48:45 +0200] [Client 16] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Deskjet_2540_series_D8D040_USB) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 16] Content-Length: 75
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] con->http=0x564afd084190
D [17/Aug/2022:13:48:45 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=391, response=0x564afd091100(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 15] bytes=0, http_state=0, data_remaining=391
D [17/Aug/2022:13:48:45 +0200] [Client 15] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 15] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 16] con->http=0x564afd088ae0
D [17/Aug/2022:13:48:45 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd0912e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 16] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:48:45 +0200] [Client 16] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 16] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 21] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 21] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 21] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 21] GET /printers/Deskjet_2540.ppd HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 21] Read: status=200, state=3
D [17/Aug/2022:13:48:45 +0200] [Client 21] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 21] Processing GET /printers/Deskjet_2540.ppd
D [17/Aug/2022:13:48:45 +0200] [Client 21] filename="/etc/cups/ppd/Deskjet_2540.ppd", type=application/vnd.cups-ppd
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 21] Sending file.
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=29
D [17/Aug/2022:13:48:45 +0200] [Client 21] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 21] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 21] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 21] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 12] 2.0 CUPS-Get-Printers 56
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:45 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 12] Content-Length: 1007
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1007, response=0x564afd0944b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] bytes=0, http_state=0, data_remaining=1007
D [17/Aug/2022:13:48:45 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 12] 2.0 CUPS-Get-Classes 57
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Classes
D [17/Aug/2022:13:48:45 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 12] Content-Length: 75
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd090ed0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:48:45 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 12] 2.0 CUPS-Get-Default 58
D [17/Aug/2022:13:48:45 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:45 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 12] Content-Length: 11460
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:45 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11460, response=0x564afd0944b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 12] bytes=0, http_state=0, data_remaining=11460
D [17/Aug/2022:13:48:45 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 10] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 10] 2.0 Get-Notifications 31
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /printers/
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 10] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 10] Content-Length: 127
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] con->http=0x564afd061280
D [17/Aug/2022:13:48:45 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564afd094300(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 10] bytes=0, http_state=0, data_remaining=127
D [17/Aug/2022:13:48:45 +0200] [Client 10] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 10] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 22] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 22] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 22] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 22] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 22] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 22] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 22] 2.0 Get-Notifications 59
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="ubuntu"
D [17/Aug/2022:13:48:45 +0200] [Client 22] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 22] Content-Length: 568
D [17/Aug/2022:13:48:45 +0200] [Client 22] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 22] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 22] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=568, response=0x564afd0945b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 22] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 22] bytes=0, http_state=0, data_remaining=568
D [17/Aug/2022:13:48:45 +0200] [Client 22] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 22] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 22] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 23] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 23] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 23] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 24] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 24] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 24] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 22] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 22] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 4] 2.0 Get-Notifications 60
D [17/Aug/2022:13:48:45 +0200] Get-Notifications /
D [17/Aug/2022:13:48:45 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:48:45 +0200] [Client 4] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 4] Content-Length: 1199
D [17/Aug/2022:13:48:45 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:48:45 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1199, response=0x564afd0946f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 4] bytes=0, http_state=0, data_remaining=1199
D [17/Aug/2022:13:48:45 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 23] POST /printers/Deskjet_2540 HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 23] Read: status=200, state=6
D [17/Aug/2022:13:48:45 +0200] [Client 23] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 23] 2.0 Get-Printer-Attributes 61
D [17/Aug/2022:13:48:45 +0200] Get-Printer-Attributes ipp://localhost/printers/Deskjet_2540
D [17/Aug/2022:13:48:45 +0200] [Client 23] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Deskjet_2540) from localhost.
D [17/Aug/2022:13:48:45 +0200] [Client 23] Content-Length: 139
D [17/Aug/2022:13:48:45 +0200] [Client 23] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 23] con->http=0x564afd099590
D [17/Aug/2022:13:48:45 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=139, response=0x564afd0944f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:45 +0200] [Client 23] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:45 +0200] [Client 23] bytes=0, http_state=0, data_remaining=139
D [17/Aug/2022:13:48:45 +0200] [Client 23] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 23] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 23] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 25] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:48:45 +0200] [Client 25] Accepted from localhost (Domain)
D [17/Aug/2022:13:48:45 +0200] [Client 25] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] [Client 25] GET /printers/Deskjet_2540.ppd HTTP/1.1
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 25] Read: status=200, state=3
D [17/Aug/2022:13:48:45 +0200] [Client 25] No authentication data provided.
D [17/Aug/2022:13:48:45 +0200] [Client 25] Processing GET /printers/Deskjet_2540.ppd
D [17/Aug/2022:13:48:45 +0200] [Client 25] filename="/etc/cups/ppd/Deskjet_2540.ppd", type=application/vnd.cups-ppd
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [17/Aug/2022:13:48:45 +0200] [Client 25] Sending file.
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] con->http=0x564afd094c70
D [17/Aug/2022:13:48:45 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17513, response=(nil)(), pipe_pid=0, file=31
D [17/Aug/2022:13:48:45 +0200] [Client 25] Flushing write buffer.
D [17/Aug/2022:13:48:45 +0200] [Client 25] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:45 +0200] [Client 25] Waiting for request.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:45 +0200] [Client 25] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:45 +0200] [Client 25] Closing connection.
D [17/Aug/2022:13:48:45 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:46 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:46 +0200] [Client 12] 2.0 CUPS-Get-Printers 62
D [17/Aug/2022:13:48:46 +0200] CUPS-Get-Printers
D [17/Aug/2022:13:48:46 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [17/Aug/2022:13:48:46 +0200] [Client 12] Content-Length: 1007
D [17/Aug/2022:13:48:46 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:48:46 +0200] Expiring subscriptions...
D [17/Aug/2022:13:48:46 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:46 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1007, response=0x564afd094620(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:46 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:46 +0200] [Client 12] bytes=0, http_state=0, data_remaining=1007
D [17/Aug/2022:13:48:46 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:46 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:46 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:46 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:46 +0200] [Client 12] 2.0 CUPS-Get-Classes 63
D [17/Aug/2022:13:48:46 +0200] CUPS-Get-Classes
D [17/Aug/2022:13:48:46 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [17/Aug/2022:13:48:46 +0200] [Client 12] Content-Length: 75
D [17/Aug/2022:13:48:46 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:46 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:46 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd091050(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:46 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:46 +0200] [Client 12] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:48:46 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:46 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:46 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 12] POST / HTTP/1.1
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 12] Read: status=200, state=6
D [17/Aug/2022:13:48:46 +0200] [Client 12] No authentication data provided.
D [17/Aug/2022:13:48:46 +0200] [Client 12] 2.0 CUPS-Get-Default 64
D [17/Aug/2022:13:48:46 +0200] CUPS-Get-Default
D [17/Aug/2022:13:48:46 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [17/Aug/2022:13:48:46 +0200] [Client 12] Content-Length: 11460
D [17/Aug/2022:13:48:46 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [17/Aug/2022:13:48:46 +0200] [Client 12] con->http=0x564afd067c00
D [17/Aug/2022:13:48:46 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=11460, response=0x564afd094620(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:48:46 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:48:46 +0200] [Client 12] bytes=0, http_state=0, data_remaining=11460
D [17/Aug/2022:13:48:46 +0200] [Client 12] Flushing write buffer.
D [17/Aug/2022:13:48:46 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:48:46 +0200] [Client 12] Waiting for request.
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:48:46 +0200] [Client 15] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:48:46 +0200] [Client 15] Closing connection.
D [17/Aug/2022:13:48:46 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [17/Aug/2022:13:48:47 +0200] Expiring subscriptions...
D [17/Aug/2022:13:49:01 +0200] [Client 16] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:49:01 +0200] [Client 16] Closing connection.
D [17/Aug/2022:13:49:01 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [17/Aug/2022:13:49:01 +0200] Expiring subscriptions...
I [17/Aug/2022:13:49:02 +0200] Expiring subscriptions...
D [17/Aug/2022:13:49:08 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:49:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:08 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:49:08 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:49:08 +0200] [Client 4] 2.0 Get-Job-Attributes 65
D [17/Aug/2022:13:49:08 +0200] Get-Job-Attributes ipp://localhost/jobs/543
D [17/Aug/2022:13:49:09 +0200] [Client 4] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/543) from localhost.
D [17/Aug/2022:13:49:09 +0200] [Client 4] Content-Length: 1028
D [17/Aug/2022:13:49:09 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:49:09 +0200] Expiring subscriptions...
D [17/Aug/2022:13:49:09 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1028, response=0x564afd093030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:49:09 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:49:09 +0200] [Client 4] bytes=0, http_state=0, data_remaining=1028
D [17/Aug/2022:13:49:09 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:49:09 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:49:09 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 4] POST / HTTP/1.1
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 4] Read: status=200, state=6
D [17/Aug/2022:13:49:09 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:49:09 +0200] [Client 4] 2.0 Cancel-Subscription 66
D [17/Aug/2022:13:49:09 +0200] Cancel-Subscription /
D [17/Aug/2022:13:49:09 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [17/Aug/2022:13:49:09 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 4] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [17/Aug/2022:13:49:09 +0200] [Client 4] Content-Length: 75
D [17/Aug/2022:13:49:09 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [17/Aug/2022:13:49:09 +0200] Expiring subscriptions...
D [17/Aug/2022:13:49:09 +0200] [Client 4] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564afd094620(IPP_STATE_DATA), pipe_pid=0, file=-1
D [17/Aug/2022:13:49:09 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [17/Aug/2022:13:49:09 +0200] [Client 4] bytes=0, http_state=0, data_remaining=75
D [17/Aug/2022:13:49:09 +0200] [Client 4] Flushing write buffer.
D [17/Aug/2022:13:49:09 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:49:09 +0200] [Client 4] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 4] GET /admin/conf/cupsd.conf HTTP/1.1
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 4] Read: status=200, state=3
D [17/Aug/2022:13:49:09 +0200] [Client 4] No authentication data provided.
D [17/Aug/2022:13:49:09 +0200] cupsdIsAuthorized: username=""
D [17/Aug/2022:13:49:09 +0200] [Client 4] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [17/Aug/2022:13:49:09 +0200] [Client 4] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [17/Aug/2022:13:49:09 +0200] [Client 4] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 26] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:49:09 +0200] [Client 26] Accepted from localhost (Domain)
D [17/Aug/2022:13:49:09 +0200] [Client 26] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 27] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:49:09 +0200] [Client 27] Accepted from localhost (Domain)
D [17/Aug/2022:13:49:09 +0200] [Client 27] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] [Client 26] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:49:09 +0200] [Client 26] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] Server address is "/run/cups/cups.sock".
D [17/Aug/2022:13:49:09 +0200] [Client 28] Accepted from localhost (Domain)
D [17/Aug/2022:13:49:09 +0200] [Client 28] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] [Client 27] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [17/Aug/2022:13:49:09 +0200] [Client 27] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] GET /admin/conf/cupsd.conf HTTP/1.1
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] Read: status=200, state=3
D [17/Aug/2022:13:49:09 +0200] [Client 28] Authorized as root using Local.
D [17/Aug/2022:13:49:09 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:49:09 +0200] [Client 28] AppArmor profile is 'unconfined'.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Not a snap - allowed.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Processing GET /admin/conf/cupsd.conf
D [17/Aug/2022:13:49:09 +0200] [Client 28] filename="/etc/cups/cupsd.conf", type=text/plain
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [17/Aug/2022:13:49:09 +0200] [Client 28] Sending file.
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] Flushing write buffer.
D [17/Aug/2022:13:49:09 +0200] [Client 28] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:49:09 +0200] [Client 28] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] GET /admin/conf/cupsd.conf HTTP/1.1
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] Read: status=200, state=3
D [17/Aug/2022:13:49:09 +0200] [Client 28] Authorized as root using Local.
D [17/Aug/2022:13:49:09 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:49:09 +0200] [Client 28] AppArmor profile is 'unconfined'.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Not a snap - allowed.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Processing GET /admin/conf/cupsd.conf
D [17/Aug/2022:13:49:09 +0200] [Client 28] filename="/etc/cups/cupsd.conf", type=text/plain
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [17/Aug/2022:13:49:09 +0200] [Client 28] Sending file.
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] Flushing write buffer.
D [17/Aug/2022:13:49:09 +0200] [Client 28] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:49:09 +0200] [Client 28] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] GET /admin/conf/cupsd.conf HTTP/1.1
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] Read: status=200, state=3
D [17/Aug/2022:13:49:09 +0200] [Client 28] Authorized as root using Local.
D [17/Aug/2022:13:49:09 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:49:09 +0200] [Client 28] AppArmor profile is 'unconfined'.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Not a snap - allowed.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Processing GET /admin/conf/cupsd.conf
D [17/Aug/2022:13:49:09 +0200] [Client 28] filename="/etc/cups/cupsd.conf", type=text/plain
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [17/Aug/2022:13:49:09 +0200] [Client 28] Sending file.
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] con->http=0x564afd04d790
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=4740, response=(nil)(), pipe_pid=0, file=26
D [17/Aug/2022:13:49:09 +0200] [Client 28] Flushing write buffer.
D [17/Aug/2022:13:49:09 +0200] [Client 28] New state is HTTP_STATE_WAITING
D [17/Aug/2022:13:49:09 +0200] [Client 28] Waiting for request.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] PUT /admin/conf/cupsd.conf HTTP/1.1
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] Read: status=200, state=9
D [17/Aug/2022:13:49:09 +0200] [Client 28] Authorized as root using Local.
D [17/Aug/2022:13:49:09 +0200] cupsdIsAuthorized: username="root"
D [17/Aug/2022:13:49:09 +0200] [Client 28] AppArmor profile is 'unconfined'.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Not a snap - allowed.
D [17/Aug/2022:13:49:09 +0200] [Client 28] Read: status=100, state=9
I [17/Aug/2022:13:49:09 +0200] [Client 28] Installing config file "/etc/cups/cupsd.conf"...
D [17/Aug/2022:13:49:09 +0200] [Client 28] cupsdSendHeader: code=201, type="(null)", auth_type=0
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 6] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 9] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 10] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 12] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 14] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 23] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 24] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] [Client 28] Closing connection.
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
E [17/Aug/2022:13:49:09 +0200] Scheduler shutting down due to program error.
D [17/Aug/2022:13:49:09 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [17/Aug/2022:13:49:09 +0200] Expiring subscriptions...
I [17/Aug/2022:13:49:09 +0200] Saving job.cache...
I [17/Aug/2022:13:49:09 +0200] Saving subscriptions.conf...
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [17/Aug/2022:13:49:09 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
D [17/Aug/2022:13:49:09 +0200] Notifier dbus started - PID = 3842
D [17/Aug/2022:13:49:09 +0200] Notifier dbus started - PID = 3843
D [17/Aug/2022:13:49:09 +0200] Notifier dbus started - PID = 3844
D [17/Aug/2022:13:49:09 +0200] Notifier dbus started - PID = 3845
D [17/Aug/2022:13:49:09 +0200] Notifier dbus started - PID = 3846
D [17/Aug/2022:13:49:09 +0200] cupsdMarkDirty(----S)
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [17/Aug/2022:13:49:09 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:49:09 +0200] cupsdMarkDirty(---J-)
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [17/Aug/2022:13:49:09 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
I [17/Aug/2022:13:49:09 +0200] Saving job.cache...
D [17/Aug/2022:13:49:09 +0200] [Job 543] Unloading...
D [17/Aug/2022:13:49:09 +0200] cupsdStopSelect()
E [17/Aug/2022:13:50:12 +0200] Unknown directive JobPrivateAccess on line 123 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:50:12 +0200] Unknown directive JobPrivateValues on line 124 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:50:12 +0200] Unknown directive SubscriptionPrivateAccess on line 125 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:50:12 +0200] Unknown directive SubscriptionPrivateValues on line 126 of /etc/cups/cupsd.conf.
W [17/Aug/2022:13:50:12 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [17/Aug/2022:13:50:13 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-Gray..\' already exists
W [17/Aug/2022:13:50:13 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Deskjet_2540_series_D8D040_USB-DeviceN..\' already exists
E [17/Aug/2022:13:55:55 +0200] [Job 543] Stopping unresponsive job.e)
ubuntu@ubuntu-NUC7i3BNH:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-=============================================-==========================================-============-================================================================================
rc bsdmainutils 12.1.7+nmu3ubuntu2 all Transitional package for more utilities from FreeBSD
rc catdoc 1:0.95-4.1 amd64 text extractor for MS-Office files
rc dkms 2.8.1-5ubuntu1 all Dynamic Kernel Module Support Framework
rc firefox 1:1snap1-0ubuntu2 amd64 Transitional package - firefox -> firefox snap
rc fuse 2.9.9-3 amd64 Filesystem in Userspace
rc gnome-software 3.36.0-0ubuntu3 amd64 Software Center for GNOME
rc libgnustep-gui0.27 0.27.0-5build2 amd64 GNUstep GUI Library
rc libkf5akonadicontact-data 4:19.04.3-0ubuntu1 all akonadi-contacts - data files
rc libkf5calendarcore5abi1:amd64 4:19.04.3-0ubuntu1 amd64 calendar access framework
rc libkf5filemetadata-data 5.62.0-0ubuntu1 all library for extracting file metadata
rc libkf5itemmodels5:amd64 5.62.0-0ubuntu1 amd64 additional item/view models for Qt Itemview
rc libpython2.7-minimal:amd64 2.7.17-1~19.10 amd64 Minimal subset of the Python language (version 2.7)
rc libpython3.7-minimal:amd64 3.7.5-2~19.10ubuntu1 amd64 Minimal subset of the Python language (version 3.7)
rc libreoffice-style-tango 1:7.3.5-0ubuntu0.22.04.1 all transitional package for Tango symbol style
rc linux-image-5.3.0-18-generic 5.3.0-18.19+1 amd64 Signed kernel image generic
rc linux-image-5.3.0-46-generic 5.3.0-46.38 amd64 Signed kernel image generic
rc linux-image-5.3.0-51-generic 5.3.0-51.44 amd64 Signed kernel image generic
rc linux-image-5.4.0-100-generic 5.4.0-100.113 amd64 Signed kernel image generic
rc linux-image-5.4.0-104-generic 5.4.0-104.118 amd64 Signed kernel image generic
rc linux-image-5.4.0-105-generic 5.4.0-105.119 amd64 Signed kernel image generic
rc linux-image-5.4.0-107-generic 5.4.0-107.121 amd64 Signed kernel image generic
rc linux-image-5.4.0-109-generic 5.4.0-109.123 amd64 Signed kernel image generic
rc linux-image-5.4.0-110-generic 5.4.0-110.124 amd64 Signed kernel image generic
rc linux-image-5.4.0-113-generic 5.4.0-113.127 amd64 Signed kernel image generic
rc linux-image-5.4.0-117-generic 5.4.0-117.132 amd64 Signed kernel image generic
rc linux-image-5.4.0-120-generic 5.4.0-120.136 amd64 Signed kernel image generic
rc linux-image-5.4.0-121-generic 5.4.0-121.137 amd64 Signed kernel image generic
rc linux-image-5.4.0-122-generic 5.4.0-122.138 amd64 Signed kernel image generic
rc linux-image-5.4.0-29-generic 5.4.0-29.33 amd64 Signed kernel image generic
rc linux-image-5.4.0-31-generic 5.4.0-31.35 amd64 Signed kernel image generic
rc linux-image-5.4.0-33-generic 5.4.0-33.37 amd64 Signed kernel image generic
rc linux-image-5.4.0-37-generic 5.4.0-37.41 amd64 Signed kernel image generic
rc linux-image-5.4.0-39-generic 5.4.0-39.43 amd64 Signed kernel image generic
rc linux-image-5.4.0-40-generic 5.4.0-40.44 amd64 Signed kernel image generic
rc linux-image-5.4.0-42-generic 5.4.0-42.46 amd64 Signed kernel image generic
rc linux-image-5.4.0-45-generic 5.4.0-45.49 amd64 Signed kernel image generic
rc linux-image-5.4.0-47-generic 5.4.0-47.51 amd64 Signed kernel image generic
rc linux-image-5.4.0-48-generic 5.4.0-48.52 amd64 Signed kernel image generic
rc linux-image-5.4.0-51-generic 5.4.0-51.56 amd64 Signed kernel image generic
rc linux-image-5.4.0-52-generic 5.4.0-52.57 amd64 Signed kernel image generic
rc linux-image-5.4.0-53-generic 5.4.0-53.59 amd64 Signed kernel image generic
rc linux-image-5.4.0-54-generic 5.4.0-54.60 amd64 Signed kernel image generic
rc linux-image-5.4.0-56-generic 5.4.0-56.62 amd64 Signed kernel image generic
rc linux-image-5.4.0-58-generic 5.4.0-58.64 amd64 Signed kernel image generic
rc linux-image-5.4.0-59-generic 5.4.0-59.65 amd64 Signed kernel image generic
rc linux-image-5.4.0-60-generic 5.4.0-60.67 amd64 Signed kernel image generic
rc linux-image-5.4.0-62-generic 5.4.0-62.70 amd64 Signed kernel image generic
rc linux-image-5.4.0-65-generic 5.4.0-65.73 amd64 Signed kernel image generic
rc linux-image-5.4.0-66-generic 5.4.0-66.74 amd64 Signed kernel image generic
rc linux-image-5.4.0-67-generic 5.4.0-67.75 amd64 Signed kernel image generic
rc linux-image-5.4.0-70-generic 5.4.0-70.78 amd64 Signed kernel image generic
rc linux-image-5.4.0-71-generic 5.4.0-71.79 amd64 Signed kernel image generic
rc linux-image-5.4.0-72-generic 5.4.0-72.80 amd64 Signed kernel image generic
rc linux-image-5.4.0-73-generic 5.4.0-73.82 amd64 Signed kernel image generic
rc linux-image-5.4.0-74-generic 5.4.0-74.83 amd64 Signed kernel image generic
rc linux-image-5.4.0-77-generic 5.4.0-77.86 amd64 Signed kernel image generic
rc linux-image-5.4.0-80-generic 5.4.0-80.90 amd64 Signed kernel image generic
rc linux-image-5.4.0-81-generic 5.4.0-81.91 amd64 Signed kernel image generic
rc linux-image-5.4.0-84-generic 5.4.0-84.94 amd64 Signed kernel image generic
rc linux-image-5.4.0-86-generic 5.4.0-86.97 amd64 Signed kernel image generic
rc linux-image-5.4.0-88-generic 5.4.0-88.99 amd64 Signed kernel image generic
rc linux-image-5.4.0-89-generic 5.4.0-89.100 amd64 Signed kernel image generic
rc linux-image-5.4.0-90-generic 5.4.0-90.101 amd64 Signed kernel image generic
rc linux-image-5.4.0-91-generic 5.4.0-91.102 amd64 Signed kernel image generic
rc linux-image-5.4.0-92-generic 5.4.0-92.103 amd64 Signed kernel image generic
rc linux-image-5.4.0-94-generic 5.4.0-94.106 amd64 Signed kernel image generic
rc linux-image-5.4.0-96-generic 5.4.0-96.109 amd64 Signed kernel image generic
rc linux-image-5.4.0-97-generic 5.4.0-97.110 amd64 Signed kernel image generic
rc linux-image-5.4.0-99-generic 5.4.0-99.112 amd64 Signed kernel image generic
rc linux-modules-5.3.0-18-generic 5.3.0-18.19 amd64 Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
rc linux-modules-5.3.0-46-generic 5.3.0-46.38 amd64 Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
rc linux-modules-5.3.0-51-generic 5.3.0-51.44 amd64 Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-100-generic 5.4.0-100.113 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-104-generic 5.4.0-104.118 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-105-generic 5.4.0-105.119 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-107-generic 5.4.0-107.121 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-109-generic 5.4.0-109.123 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-110-generic 5.4.0-110.124 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-113-generic 5.4.0-113.127 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-117-generic 5.4.0-117.132 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-120-generic 5.4.0-120.136 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-121-generic 5.4.0-121.137 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-122-generic 5.4.0-122.138 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-29-generic 5.4.0-29.33 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-31-generic 5.4.0-31.35 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-33-generic 5.4.0-33.37 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-37-generic 5.4.0-37.41 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-39-generic 5.4.0-39.43 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-40-generic 5.4.0-40.44 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-42-generic 5.4.0-42.46 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-45-generic 5.4.0-45.49 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-47-generic 5.4.0-47.51 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-48-generic 5.4.0-48.52 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-51-generic 5.4.0-51.56 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-52-generic 5.4.0-52.57 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-53-generic 5.4.0-53.59 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-54-generic 5.4.0-54.60 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-56-generic 5.4.0-56.62 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-58-generic 5.4.0-58.64 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-59-generic 5.4.0-59.65 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-60-generic 5.4.0-60.67 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-62-generic 5.4.0-62.70 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-65-generic 5.4.0-65.73 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-66-generic 5.4.0-66.74 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-67-generic 5.4.0-67.75 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-70-generic 5.4.0-70.78 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-71-generic 5.4.0-71.79 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-72-generic 5.4.0-72.80 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-73-generic 5.4.0-73.82 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-74-generic 5.4.0-74.83 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-77-generic 5.4.0-77.86 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-80-generic 5.4.0-80.90 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-81-generic 5.4.0-81.91 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-84-generic 5.4.0-84.94 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-86-generic 5.4.0-86.97 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-88-generic 5.4.0-88.99 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-89-generic 5.4.0-89.100 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-90-generic 5.4.0-90.101 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-91-generic 5.4.0-91.102 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-92-generic 5.4.0-92.103 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-94-generic 5.4.0-94.106 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-96-generic 5.4.0-96.109 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-97-generic 5.4.0-97.110 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-5.4.0-99-generic 5.4.0-99.112 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.3.0-18-generic 5.3.0-18.19 amd64 Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
rc linux-modules-extra-5.3.0-46-generic 5.3.0-46.38 amd64 Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
rc linux-modules-extra-5.3.0-51-generic 5.3.0-51.44 amd64 Linux kernel extra modules for version 5.3.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-100-generic 5.4.0-100.113 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-104-generic 5.4.0-104.118 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-105-generic 5.4.0-105.119 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-107-generic 5.4.0-107.121 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-109-generic 5.4.0-109.123 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-110-generic 5.4.0-110.124 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-113-generic 5.4.0-113.127 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-117-generic 5.4.0-117.132 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-120-generic 5.4.0-120.136 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-121-generic 5.4.0-121.137 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-122-generic 5.4.0-122.138 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-29-generic 5.4.0-29.33 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-31-generic 5.4.0-31.35 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-33-generic 5.4.0-33.37 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-37-generic 5.4.0-37.41 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-39-generic 5.4.0-39.43 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-40-generic 5.4.0-40.44 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-42-generic 5.4.0-42.46 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-45-generic 5.4.0-45.49 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-47-generic 5.4.0-47.51 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-48-generic 5.4.0-48.52 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-51-generic 5.4.0-51.56 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-52-generic 5.4.0-52.57 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-53-generic 5.4.0-53.59 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-54-generic 5.4.0-54.60 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-56-generic 5.4.0-56.62 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-58-generic 5.4.0-58.64 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-59-generic 5.4.0-59.65 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-60-generic 5.4.0-60.67 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-62-generic 5.4.0-62.70 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-65-generic 5.4.0-65.73 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-66-generic 5.4.0-66.74 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-67-generic 5.4.0-67.75 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-70-generic 5.4.0-70.78 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-71-generic 5.4.0-71.79 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-72-generic 5.4.0-72.80 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-73-generic 5.4.0-73.82 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-74-generic 5.4.0-74.83 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-77-generic 5.4.0-77.86 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-80-generic 5.4.0-80.90 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-81-generic 5.4.0-81.91 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-84-generic 5.4.0-84.94 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-86-generic 5.4.0-86.97 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-88-generic 5.4.0-88.99 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-89-generic 5.4.0-89.100 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-90-generic 5.4.0-90.101 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-91-generic 5.4.0-91.102 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-92-generic 5.4.0-92.103 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-94-generic 5.4.0-94.106 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-96-generic 5.4.0-96.109 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-97-generic 5.4.0-97.110 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc linux-modules-extra-5.4.0-99-generic 5.4.0-99.112 amd64 Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc ltrace 0.7.3-6.1ubuntu6 amd64 Tracks runtime library calls in dynamically linked programs
rc marble-data 4:19.04.3-0ubuntu1 all data files for Marble
rc minidlna 1.2.1+dfsg-1build1 amd64 lightweight DLNA/UPnP-AV server targeted at embedded systems
rc mtools 4.0.33-1+really4.0.32-1build1 amd64 Tools for manipulating MSDOS files
rc odbcinst 2.3.9-5 amd64 Helper program for accessing ODBC configuration files
rc pkg-config 0.29.2-1ubuntu3 amd64 manage compile and link flags for libraries
rc printer-driver-gutenprint 5.3.3-4 amd64 printer drivers for CUPS
rc python 2.7.17-1 amd64 interactive high-level object-oriented language (Python2 version)
rc python2.7-minimal 2.7.17-1~19.10 amd64 Minimal subset of the Python language (version 2.7)
rc python3.7-minimal 3.7.5-2~19.10ubuntu1 amd64 Minimal subset of the Python language (version 3.7)
rc sane 1.0.14-16 amd64 scanner graphical frontends
rc shotwell 0.30.7-0ubuntu1 amd64 digital photo organizer
rc ubuntu-system-service 0.7 all Dbus service to set various system-wide configurationsHors ligne
#4 Le 17/08/2022, à 13:08
- xubu1957
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Pour purger les résidus de configuration marqués "rc" :
sudo apt purge ~ccomme expliqué à la machine à café.
E [17/Aug/2022:13:47:32 +0200] Unknown directive JobPrivateAccess on line 123 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:47:32 +0200] Unknown directive JobPrivateValues on line 124 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:47:32 +0200] Unknown directive SubscriptionPrivateAccess on line 125 of /etc/cups/cupsd.conf.
E [17/Aug/2022:13:47:32 +0200] Unknown directive SubscriptionPrivateValues on line 126 of /etc/cups/cupsd.conf.Pour ces lignes de retour, il y a des commandes proposées par ylag, initialement, dans ce fil
Le 11/10/2020, ylag a écrit :
Bonjour,
(...)Pour ce genre d'erreurs, peut-être réinitialiser le fichier /etc/cups/cupsd.conf à ses valeurs par défaut en recopiant le contenu de /usr/share/cups/cupsd.conf.default dans /etc/cups/cupsd.conf:
sudo cp /usr/share/cups/cupsd.conf.default /etc/cups/cupsd.conf...redémarrer ensuite le service cups:
sudo systemctl restart cups.service...puis tenter de réinstaller l'imprimante ?(...)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 17/08/2022, à 14:01
- Ordissimo1
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Bonjour à tous !
Suprime ipp-usb
sudo apt purge ipp-usbHors ligne
#6 Le 17/08/2022, à 16:00
- c2h
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Bonjour,
sudo apt purge ~csudo apt purge ipp-usbsemblent avoir fait du bien. L'impression est désormais récupérée.
En revanche, j'ai un problème sur une fonction que j'utilise beaucoup, le scan avec gscan2pdf.
J'ai pu en faire un ; mais depuis, j'ai un message d'erreur dès lancement du programme : "Error opening the last device used".
Je peux scanner en passant par HPLIP, mais ça ne m'intéresse pas car en général, c'est pour appliquer à mon document la ROC et le transformer en fichier texte, ce qui se fait très aisément dans gscan2pdf.
c2h
Hors ligne
#7 Le 17/08/2022, à 16:19
- c2h
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Au temps pour moi !
C'est juste que gscan2pdf, par défaut, ne cherchait pas le bon périphérique...
c2h
Hors ligne
#8 Le 17/08/2022, à 16:32
- iznobe
Re : Problème d'imprimante HP Deskjet 2540 avec ubuntu 22.04.1 LTS
Bonjour , si cela est bon pour toi , tu peux modifier ton 1er message en y editant le titre de celui-ci et y ajouter [ RESOLU ] afin de faciliter la recherche des posts resolu pour les autres utilisateurs .
Merci et bonne route 
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne