Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 27/08/2022, à 13:04

pkito

imprimante multifoction samsung Xpress C480W

Bonjour
Le paramétrage de mon imprimante samsung Xpres C480w installée avec "samsung c48x series ps" ne veut plus imprimer en couleur, la correction du paramétrage ne fonctionne plus elle revient toujours sur grayscale.
quelqu'un peut m'indiquer pour corriger, vu qu'il n'y a pas de défaut je n'ai pas de message a renvoyer

Dernière modification par pkito (Le 27/08/2022, à 15:41)

Hors ligne

#2 Le 27/08/2022, à 13:06

xubu1957

Re : imprimante multifoction samsung Xpress C480W

Bonjour,

Tu utilises Ubuntu ?

Il faudrait fournir quand même > les Informations utiles à donner lorsque j'ai un problème.

Dans le tutoriel épinglé, syvain3800 a écrit :

I ] Le Titre du message

Cela parait bête , mais si dans le titre la marque et le modèle de l'imprimante pouvait être écrit cela serait déjà super utile pour les aidants, qui peuvent déjà se faire une première idée des pilotes qu'il te faut et  de la procédure qu'il te faudra suivre pour les installer au besoin .
Bon la plupart du temps ces infos sont données ,,,, mais des fois ... non ... c'est pour cela je précise.

Dernière modification par xubu1957 (Le 27/08/2022, à 13:08)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 27/08/2022, à 14:05

pkito

Re : imprimante multifoction samsung Xpress C480W

Bonjour
je l'ai noté dans le message
"mon imprimante samsung Xpress C480w" ainsi que le le paramétrage utilisé pour la faire fonctionner "samsung c48x series ps"
dis moi sinon qu'elles sont les infos qu'il te faudrait
merci

Hors ligne

#4 Le 27/08/2022, à 14:19

xubu1957

Re : imprimante multifoction samsung Xpress C480W

Il faut aussi corriger le titre, avec le bouton Modifier au bas de ton premier message.   wink

Tu n'as pas cliqué sur le lien au #2 ?


Dans le tutoriel épinglé, sylvain3800 a écrit :

A ] les infos sur ton système qu'il faudrait donner quelque soit le problème

c'est important donc copie colle le retour de cette commande :

cat /etc/lsb-release && uname -ir && groups && lsusb

avec cela on saura pas mal de chose concernant ton système et son architecture c'est utile pour proposer des pilotes

si tu as une SAMSUNG

dpkg -l | grep suld

pour le pilote et afin de savoir si le depot est installé 

find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; nl -ba "$1"' _ '{}' \;

B.2 ) Les infos a donner quel que soit la marque de l'imprimante 

il suffit de copier/coller ces commandes :

dpkg -l | grep cups
lpstat -t
/usr/sbin/lpinfo -v
cat /var/log/cups/error_log
dpkg -l | grep -v ^ii

Dernière modification par xubu1957 (Le 27/08/2022, à 15:42)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 27/08/2022, à 16:31

pkito

Re : imprimante multifoction samsung Xpress C480W

Désoler je lisais les infos du lien que tu m'avais envoyer, effectivement il me manque pas mal d'infos, je vais essayé d'être assez complet (première utilisation du site)
j'ai repris le titre, mais je ne comprend pas « Tu n'as pas cliqué sur le lien au #2 ? »  ?

Pour les infos :

A/ infos sur ton système

francisco@francisco-desktop:~$ cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=22.04
DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Ubuntu 22.04.1 LTS"
5.15.0-46-generic x86_64
francisco adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 003 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 093a:1688 Pixart Imaging, Inc. 2.4G Wireless Mouse
Bus 007 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0c45:6515 Microdia USB DEVICE
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 003: ID 04e8:347e Samsung Electronics Co., Ltd C48x Series Color Laser Multifunction Printer
Bus 008 Device 002: ID 0c45:6341 Microdia Defender G-Lens 2577 HD720p Camera
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

SAMSUNG

francisco@francisco-desktop:~$ dpkg -l | grep suld
ii  suldr-keyring                                 2                                       all          Samsung Unified Linux Driver Repository Keyring

Pour le pilote et afin de savoir si le dépôt est installé:

francisco@francisco-desktop:~$ find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; nl -ba "$1"' _ '{}' \;

/etc/apt/sources.list.d/samsung.list

     1	deb https://www.bchemnet.com/suldr/ debian extra
     2	deb https://www.bchemnet.com/suldr/ debian extra

/etc/apt/sources.list

     1	# deb cdrom:[Ubuntu 22.04.1 LTS _Jammy Jellyfish_ - Release amd64 (20220809.1)]/ jammy main restricted
     2	deb-src http://archive.ubuntu.com/ubuntu jammy main restricted #Added by software-properties
     3	
     4	# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
     5	# newer versions of the distribution.
     6	deb http://fr.archive.ubuntu.com/ubuntu/ jammy main restricted
     7	deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy multiverse main universe restricted
     8	
     9	## Major bug fix updates produced after the final release of the
    10	## distribution.
    11	deb http://fr.archive.ubuntu.com/ubuntu/ jammy-updates main restricted
    12	deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy-updates multiverse main universe restricted
    13	
    14	## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
    15	## team. Also, please note that software in universe WILL NOT receive any
    16	## review or updates from the Ubuntu security team.
    17	deb http://fr.archive.ubuntu.com/ubuntu/ jammy universe
    18	# deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy universe
    19	deb http://fr.archive.ubuntu.com/ubuntu/ jammy-updates universe
    20	# deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy-updates universe
    21	
    22	## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
    23	## team, and may not be under a free licence. Please satisfy yourself as to 
    24	## your rights to use the software. Also, please note that software in 
    25	## multiverse WILL NOT receive any review or updates from the Ubuntu
    26	## security team.
    27	deb http://fr.archive.ubuntu.com/ubuntu/ jammy multiverse
    28	# deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy multiverse
    29	deb http://fr.archive.ubuntu.com/ubuntu/ jammy-updates multiverse
    30	# deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy-updates multiverse
    31	
    32	## N.B. software from this repository may not have been tested as
    33	## extensively as that contained in the main release, although it includes
    34	## newer versions of some applications which may provide useful features.
    35	## Also, please note that software in backports WILL NOT receive any review
    36	## or updates from the Ubuntu security team.
    37	deb http://fr.archive.ubuntu.com/ubuntu/ jammy-backports main restricted universe multiverse
    38	deb-src http://fr.archive.ubuntu.com/ubuntu/ jammy-backports main restricted universe multiverse
    39	
    40	deb http://security.ubuntu.com/ubuntu jammy-security main restricted
    41	deb-src http://security.ubuntu.com/ubuntu jammy-security multiverse main universe restricted
    42	deb http://security.ubuntu.com/ubuntu jammy-security universe
    43	# deb-src http://security.ubuntu.com/ubuntu jammy-security universe
    44	deb http://security.ubuntu.com/ubuntu jammy-security multiverse
    45	# deb-src http://security.ubuntu.com/ubuntu jammy-security multiverse
    46	
    47	# This system was installed using small removable media
    48	# (e.g. netinst, live or single CD). The matching "deb cdrom"
    49	# entries were disabled at the end of the installation process.
    50	# For information about how to configure apt package sources,
    51	# see the sources.list(5) manual.

B.2 ) Les infos a donner quel que soit la marque de l'imprimante  

francisco@francisco-desktop:~$ dpkg -l | grep cups
ii  bluez-cups                                    5.64-0ubuntu1                           amd64        Bluetooth printer driver for CUPS
ii  cups                                          2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                                  1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                      2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                   2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                   2.4.1op1-1ubuntu4.1                     all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                             2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                   2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                                  1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                     1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                                2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                                0.2.6-1ubuntu5                          amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                     2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                            2.4.1op1-1ubuntu4.1                     all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                                2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                         1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                           2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - Raster image library
ii  printer-driver-hpcups                         3.21.12+dfsg0-1                         amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups:amd64                            2.0.1-5build1                           amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                           1.5.16-0ubuntu3                         all          Python utility modules around the CUPS printing system
francisco@francisco-desktop:~$ lpstat -t
scheduler is running
system default destination: C48x-Series
matériel pour C48x-Series : usb://Samsung/C48x%20Series?serial=08GMB8KK6B00EZZ&interface=1
C48x-Series accepte des requêtes depuis sam. 27 août 2022 13:36:09
printer C48x-Series is idle.  enabled since sam. 27 août 2022 13:36:09
francisco@francisco-desktop:~$ /usr/sbin/lpinfo -v
file cups-brf:/
network https
network ipp
network http
network ipps
direct hp
network beh
network socket
network lpd
serial serial:/dev/ttyS0?baud=115200
direct hpfax
direct usb://Unknown/Printer?interface=1
francisco@francisco-desktop:~$ cat /var/log/cups/error_log
W [27/Aug/2022:11:15:30 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [27/Aug/2022:11:15:30 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [27/Aug/2022:11:45:08 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:11:45:08 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:11:45:11 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:11:45:11 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:15:11:37 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [27/Aug/2022:13:14:21 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:14:21 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:14:21 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:14:21 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:14:21 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:14:21 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:16:07 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:16:07 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:18:10 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:18:10 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:19:23 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:19:23 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:19:29 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:19:29 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
E [27/Aug/2022:13:19:52 +0200] [Job 10] Invalid printer command \"Clean\".
E [27/Aug/2022:13:20:00 +0200] [Job 10] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [27/Aug/2022:13:20:00 +0200] [Job 10] The following messages were recorded from 13:19:52 to 13:20:00
D [27/Aug/2022:13:20:00 +0200] [Job 10] Applying default options...
D [27/Aug/2022:13:20:00 +0200] [Job 10] Adding default print-color-mode=monochrome
D [27/Aug/2022:13:20:00 +0200] [Job 10] Adding start banner page "none".
D [27/Aug/2022:13:20:00 +0200] [Job 10] Adding end banner page "none".
D [27/Aug/2022:13:20:00 +0200] [Job 10] File of type application/vnd.cups-command queued by "anonymous".
D [27/Aug/2022:13:20:00 +0200] [Job 10] hold_until=0
D [27/Aug/2022:13:20:00 +0200] [Job 10] Queued on "C48x-Series" by "anonymous".
D [27/Aug/2022:13:20:00 +0200] [Job 10] time-at-processing=1661599192
D [27/Aug/2022:13:20:00 +0200] [Job 10] 2 filters for job:
D [27/Aug/2022:13:20:00 +0200] [Job 10] commandtops (application/vnd.cups-command to printer/C48x-Series/application/postscript, cost 100)
D [27/Aug/2022:13:20:00 +0200] [Job 10] - (printer/C48x-Series/application/postscript to printer/C48x-Series, cost 0)
D [27/Aug/2022:13:20:00 +0200] [Job 10] job-sheets=none,none
D [27/Aug/2022:13:20:00 +0200] [Job 10] print-color-mode=gray, print-quality=normal
D [27/Aug/2022:13:20:00 +0200] [Job 10] Adding preset option ColorModel=Gray
D [27/Aug/2022:13:20:00 +0200] [Job 10] Adding preset option JCLEconomode=Off
D [27/Aug/2022:13:20:00 +0200] [Job 10] Adding preset option Quality=Normal
D [27/Aug/2022:13:20:00 +0200] [Job 10] After mapping finishings ColorModel=Gray
D [27/Aug/2022:13:20:00 +0200] [Job 10] After mapping finishings JCLEconomode=Off
D [27/Aug/2022:13:20:00 +0200] [Job 10] After mapping finishings Quality=Normal
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[0]="C48x-Series"
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[1]="10"
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[2]="anonymous"
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[3]="Nettoyage des têtes d’impression"
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[4]="1"
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[5]="job-uuid=urn:uuid:94bc5ecd-b6b5-3788-79d8-8a760e42a8b9 print-color-mode=monochrome job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1661599192 time-at-processing=1661599192 ColorModel=Gray JCLEconomode=Off Quality=Normal"
D [27/Aug/2022:13:20:00 +0200] [Job 10] argv[6]="/var/spool/cups/d00010-001"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[6]="CUPS_STATEDIR=/run/cups"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[7]="HOME=/var/spool/cups/tmp"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[9]="SERVER_ADMIN=root@francisco-desktop"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[10]="SOFTWARE=CUPS/2.4.1"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[12]="USER=root"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[13]="CUPS_MAX_MESSAGE=2047"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[16]="IPP_PORT=631"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[17]="CHARSET=utf-8"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[18]="LANG=fr_FR.UTF-8"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[19]="PPD=/etc/cups/ppd/C48x-Series.ppd"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[20]="CONTENT_TYPE=application/vnd.cups-command"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[21]="DEVICE_URI=usb://Samsung/C48x%20Series?serial=08GMB8KK6B00EZZ&interface=1"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[22]="PRINTER_INFO=Samsung C48x Series"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[23]="PRINTER_LOCATION=francisco-desktop"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[24]="PRINTER=C48x-Series"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[25]="PRINTER_STATE_REASONS=none"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[26]="CUPS_FILETYPE=document"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[27]="FINAL_CONTENT_TYPE=application/postscript"
D [27/Aug/2022:13:20:00 +0200] [Job 10] envp[28]="AUTH_I****"
D [27/Aug/2022:13:20:00 +0200] [Job 10] Started filter /usr/lib/cups/filter/commandtops (PID 3977)
D [27/Aug/2022:13:20:00 +0200] [Job 10] Started backend /usr/lib/cups/backend/usb (PID 3978)
D [27/Aug/2022:13:20:00 +0200] [Job 10] Loading USB quirks from \"/usr/share/cups/usb\".
D [27/Aug/2022:13:20:00 +0200] [Job 10] Loaded 118 quirks.
D [27/Aug/2022:13:20:00 +0200] [Job 10] Printing on printer with URI: usb://Samsung/C48x%20Series?serial=08GMB8KK6B00EZZ&interface=1
D [27/Aug/2022:13:20:00 +0200] [Job 10] Set job-printer-state-message to "Invalid printer command \"Clean\".", current level=ERROR
D [27/Aug/2022:13:20:00 +0200] [Job 10] PID 3977 (/usr/lib/cups/filter/commandtops) stopped with status 1.
D [27/Aug/2022:13:20:00 +0200] [Job 10] Hint: Try setting the LogLevel to "debug" to find out more.
D [27/Aug/2022:13:20:00 +0200] [Job 10] libusb_get_device_list=17
D [27/Aug/2022:13:20:00 +0200] [Job 10] STATE: +connecting-to-device
D [27/Aug/2022:13:20:00 +0200] [Job 10] STATE: -connecting-to-device
D [27/Aug/2022:13:20:00 +0200] [Job 10] iSerialNumber=\"08GMB8KK6B00EZZ\"
D [27/Aug/2022:13:20:00 +0200] [Job 10] Printer found with device ID: MFG:Samsung;CMD:SPLC,PCL6,PS3,URF,FWV,PIC,EXT,SPDS;MDL:C48x Series;CLS:PRINTER;CID:SA_SPLV5_COLOR;MODE:SCN,SPL5,R000102,SCP;STATUS:IDLE; Device URI: usb://Samsung/C48x%20Series?serial=08GMB8KK6B00EZZ&interface=1
D [27/Aug/2022:13:20:00 +0200] [Job 10] Device protocol: 2
D [27/Aug/2022:13:20:00 +0200] [Job 10] Sending data to printer.
D [27/Aug/2022:13:20:00 +0200] [Job 10] Sent 0 bytes...
D [27/Aug/2022:13:20:00 +0200] [Job 10] Waiting for read thread to exit...
D [27/Aug/2022:13:20:00 +0200] [Job 10] Read thread still active, aborting the pending read...
D [27/Aug/2022:13:20:00 +0200] [Job 10] Resetting printer.
D [27/Aug/2022:13:20:00 +0200] [Job 10] PID 3978 (/usr/lib/cups/backend/usb) exited with no errors.
D [27/Aug/2022:13:20:00 +0200] [Job 10] End of messages
D [27/Aug/2022:13:20:00 +0200] [Job 10] printer-state=3(idle)
D [27/Aug/2022:13:20:00 +0200] [Job 10] printer-state-message="Sending data to printer."
D [27/Aug/2022:13:20:00 +0200] [Job 10] printer-state-reasons=none
E [27/Aug/2022:13:20:40 +0200] [Client 4902] Returning IPP server-error-not-accepting-jobs for Print-Job (ipp://localhost/printers/C48x) from localhost.
W [27/Aug/2022:13:20:40 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Gray..\' already exists
W [27/Aug/2022:13:20:40 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-CMYK..\' already exists
W [27/Aug/2022:13:24:33 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:24:33 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:24:46 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:24:46 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:35:26 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:35:26 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:39:11 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:39:11 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:39:11 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:39:11 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:13:39:13 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-Gray..\' already exists
W [27/Aug/2022:13:39:13 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'C48x-Series-CMYK..\' already exists
W [27/Aug/2022:14:54:28 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [27/Aug/2022:16:05:27 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
francisco@francisco-desktop:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                           Version                                 Architecture Description
+++-=============================================-=======================================-============-================================================================================
rc  gmpc-data                                     11.8.16-19                              all          GNOME Music Player Client - data files
rc  libasound2-plugins:i386                       1.2.6-1                                 i386         ALSA library additional plugins
rc  libgdk-pixbuf-2.0-0:i386                      2.42.8+dfsg-1                           i386         GDK Pixbuf library
rc  libglib2.0-0:i386                             2.72.1-1                                i386         GLib library of C routines
rc  libgtk-3-0:i386                               3.24.33-1ubuntu2                        i386         GTK graphical user interface library
rc  libpulse0:i386                                1:15.99.1+dfsg1-1ubuntu1                i386         PulseAudio client libraries
rc  libqt5core5a:i386                             5.15.3+dfsg-2ubuntu0.1                  i386         Qt 5 core module
rc  libqt5gui5:i386                               5.15.3+dfsg-2ubuntu0.1                  i386         Qt 5 GUI module
rc  libsasl2-modules:i386                         2.1.27+dfsg2-3ubuntu1                   i386         Cyrus SASL - pluggable authentication modules

je ne sais pas si les réponses sont bien notées, je les ai colées entreles balises-code, comme mentionné dans le tuto.
sinon dis moi comment, et je recommence
merci

Hors ligne

#6 Le 27/08/2022, à 16:38

xubu1957

Re : imprimante multifoction samsung Xpress C480W

Le lien dans le message #2, c'était la discussion du tutoriel de sylvain3800.

Certains demandeurs n'ont pas l'habitude d'utiliser nos liens cliquables.

C'est bien lisible.

Pour purger les résidus de configuration marqués "rc" : 

sudo apt purge ~c

comme expliqué à la machine à café.

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

Pages : 1