Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 16/10/2022, à 14:42

post concept antoine

Carte graphiques intel nvidia 3060 RTX egpu

Bonjour j'ai recement essayé d'installer une carte graphique supplementaire en boitier externe sur mon portable pour augmenter la vram dispo

Premier essai l'ordinateur ne boot plus , je reinstalle ubuntu 22.04 et la re télécharge les pilotes j'etais en 520 mais il me conseille de passer en 515-open mais il ne reconnais pas les cartes j'ai une erreur du type nvidia-drm "Erorr" je télécharge CUDA aussi mais cela ne fonctionne toujours pas , je n'arrive pas a avoir les cartes detectée par n vidia settings

alors que j'ai cela :  

lspci -vnn | grep -A 12 '\[030[02]\]' | grep -Ei "vga|3d|display|kernel"

00:02.0 VGA compatible controller [0300]: Intel Corporation CometLake-H GT2 [UHD Graphics] [8086:9bc4] (rev 05) (prog-if 00 [VGA controller])
        Kernel driver in use: i915
        Kernel modules: i915
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA106M [GeForce RTX 3060 Mobile / Max-Q] [10de:2520] (rev a1) (prog-if 00 [VGA controller])
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia
0b:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA106 [GeForce RTX 3060 Lite Hash Rate] [10de:2504] (rev a1) (prog-if 00 [VGA controller])
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia

est ce que quelq'un peu m'aider en vous remerciant smile

Dernière modification par post concept antoine (Le 17/10/2022, à 10:01)

Hors ligne

#2 Le 16/10/2022, à 16:42

post concept antoine

Re : Carte graphiques intel nvidia 3060 RTX egpu

j'ai un peu avancé j'arrive maintenant à avoir cela 

+-----------------------------------------------------------------------------+
| NVIDIA-SMI 520.61.05    Driver Version: 520.61.05    CUDA Version: 11.8     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  On   | 00000000:01:00.0  On |                  N/A |
| N/A   56C    P0    35W /  N/A |    476MiB /  6144MiB |     21%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+
|   1  NVIDIA GeForce ...  Off  | 00000000:0B:00.0 Off |                  N/A |
|  0%   40C    P8     8W / 170W |      1MiB / 12288MiB |      0%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+

savez vous comment "turn on" le GPU 1 ?

Dernière modification par post concept antoine (Le 17/10/2022, à 10:00)

Hors ligne

#3 Le 16/10/2022, à 17:28

cqfd93

Re : Carte graphiques intel nvidia 3060 RTX egpu

Modération

Bonjour,

Pour ajouter toi-même les balises code à tes messages #1 et #2 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message
    1530289742.png

− cqfd93 −

Hors ligne

#4 Le 17/10/2022, à 10:00

post concept antoine

Re : Carte graphiques intel nvidia 3060 RTX egpu

Section "Module"
    Load           "modesetting"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    BusID          "1:0:0"
    Option         "AllowEmptyInitialConfiguration"
    Option         "AllowExternalGpus" "True"
EndSection

Hors ligne

#5 Le 17/10/2022, à 10:10

post concept antoine

Re : Carte graphiques intel nvidia 3060 RTX egpu

 12.237] (--) Log file renamed from "/var/log/Xorg.pid-1602.log" to "/var/log/Xorg.0.log"
[    12.238] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[    12.238] Current Operating System: Linux postconceptlab-pcx0dx 5.15.0-50-lowlatency #56-Ubuntu SMP PREEMPT Wed Sep 21 13:57:05 UTC 2022 x86_64
[    12.238] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-50-lowlatency root=UUID=88b5985a-f3eb-4c8a-8d1f-e1ca9e045281 ro threadirqs splash vt.handoff=1
[    12.238] xorg-server 2:21.1.3-2ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[    12.238] Current version of pixman: 0.40.0
[    12.238] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.238] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.238] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 17 09:16:46 2022
[    12.238] (==) Using config file: "/etc/X11/xorg.conf"
[    12.238] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.238] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.240] (==) No Layout section.  Using the first Screen section.
[    12.240] (==) No screen section available. Using defaults.
[    12.240] (**) |-->Screen "Default Screen Section" (0)
[    12.240] (**) |   |-->Monitor "<default monitor>"
[    12.240] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    12.240] (**) |   |-->Device "Device0"
[    12.240] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    12.240] (==) Automatically adding devices
[    12.240] (==) Automatically enabling devices
[    12.240] (==) Automatically adding GPU devices
[    12.240] (==) Automatically binding GPU devices
[    12.240] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    12.242] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.242] 	Entry deleted from font path.
[    12.242] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    12.242] 	Entry deleted from font path.
[    12.242] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    12.242] 	Entry deleted from font path.
[    12.243] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    12.243] 	Entry deleted from font path.
[    12.243] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    12.243] 	Entry deleted from font path.
[    12.243] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    12.243] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.243] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.243] (II) Loader magic: 0x565344739020
[    12.243] (II) Module ABI versions:
[    12.243] 	X.Org ANSI C Emulation: 0.4
[    12.243] 	X.Org Video Driver: 25.2
[    12.243] 	X.Org XInput driver : 24.4
[    12.243] 	X.Org Server Extension : 10.0
[    12.244] (++) using VT number 1

[    12.244] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    12.244] (II) xfree86: Adding drm device (/dev/dri/card1)
[    12.244] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    12.386] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.387] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    12.391] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[    12.391] (**) OutputClass "Nvidia Prime" ModulePath extended to "/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[    12.391] (**) OutputClass "Nvidia Prime" setting /dev/dri/card1 as PrimaryGPU
[    12.392] (--) PCI: (0@0:2:0) 8086:9bc4:1558:65e5 rev 5, Mem @ 0x6203000000/16777216, 0x4000000000/1073741824, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    12.392] (--) PCI:*(1@0:0:0) 10de:2520:1558:65e5 rev 161, Mem @ 0x88000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[    12.392] (II) "glx" will be loaded by default.
[    12.392] (II) LoadModule: "modesetting"
[    12.394] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.395] (II) Module modesetting: vendor="X.Org Foundation"
[    12.395] 	compiled for 1.21.1.3, module version = 1.21.1
[    12.395] 	Module class: X.Org Video Driver
[    12.395] 	ABI class: X.Org Video Driver, version 25.2
[    12.395] (II) LoadModule: "glx"
[    12.395] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    12.404] (II) Module glx: vendor="X.Org Foundation"
[    12.404] 	compiled for 1.21.1.3, module version = 1.0.0
[    12.404] 	ABI class: X.Org Server Extension, version 10.0
[    12.404] (II) LoadModule: "nvidia"
[    12.404] (II) Loading /lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[    12.409] (II) Module nvidia: vendor="NVIDIA Corporation"
[    12.409] 	compiled for 1.6.99.901, module version = 1.0.0
[    12.409] 	Module class: X.Org Video Driver
[    12.410] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    12.410] (II) NVIDIA dlloader X Driver  515.65.01  Wed Jul 20 13:50:46 UTC 2022
[    12.410] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    12.410] (WW) Falling back to old probe method for modesetting
[    12.411] (II) Loading sub module "fb"
[    12.411] (II) LoadModule: "fb"
[    12.411] (II) Module "fb" already built-in
[    12.411] (II) Loading sub module "wfb"
[    12.411] (II) LoadModule: "wfb"
[    12.411] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    12.412] (II) Module wfb: vendor="X.Org Foundation"
[    12.412] 	compiled for 1.21.1.3, module version = 1.0.0
[    12.412] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    12.412] (II) Loading sub module "ramdac"
[    12.412] (II) LoadModule: "ramdac"
[    12.412] (II) Module "ramdac" already built-in
[    12.436] (II) modeset(G0): using drv /dev/dri/card0
[    12.436] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    12.436] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    12.436] (==) NVIDIA(0): RGB weight 888
[    12.436] (==) NVIDIA(0): Default visual is TrueColor
[    12.436] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    12.436] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    12.436] (II) Applying OutputClass "Nvidia Prime" options to /dev/dri/card1
[    12.436] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    12.436] (**) NVIDIA(0): Option "AllowExternalGpus" "True"
[    12.436] (**) NVIDIA(0): Enabling 2D acceleration
[    12.436] (II) Loading sub module "glxserver_nvidia"
[    12.436] (II) LoadModule: "glxserver_nvidia"
[    12.436] (II) Loading /lib/x86_64-linux-gnu/nvidia/xorg/libglxserver_nvidia.so
[    12.491] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    12.491] 	compiled for 1.6.99.901, module version = 1.0.0
[    12.491] 	Module class: X.Org Server Extension
[    12.491] (II) NVIDIA GLX Module  515.65.01  Wed Jul 20 13:48:42 UTC 2022
[    12.492] (II) NVIDIA: The X server supports PRIME Render Offload.
[    12.614] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    12.614] (--) NVIDIA(0):     DFP-0
[    12.614] (--) NVIDIA(0):     DFP-1
[    12.614] (--) NVIDIA(0):     DFP-2 (boot)
[    12.614] (--) NVIDIA(0):     DFP-3
[    12.614] (--) NVIDIA(0):     DFP-4
[    12.768] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3060 Laptop GPU (GA106-A) at
[    12.768] (II) NVIDIA(0):     PCI:1:0:0 (GPU-0)
[    12.768] (--) NVIDIA(0): Memory: 6291456 kBytes
[    12.769] (--) NVIDIA(0): VideoBIOS: 94.06.13.40.39
[    12.769] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    12.772] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    12.772] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    12.772] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    12.772] (--) NVIDIA(GPU-0): 
[    12.777] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    12.777] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    12.777] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    12.777] (--) NVIDIA(GPU-0): 
[    12.870] (--) NVIDIA(GPU-0): ViewSonic VA2732-FHD (DFP-2): connected
[    12.870] (--) NVIDIA(GPU-0): ViewSonic VA2732-FHD (DFP-2): Internal TMDS
[    12.870] (--) NVIDIA(GPU-0): ViewSonic VA2732-FHD (DFP-2): 600.0 MHz maximum pixel clock
[    12.870] (--) NVIDIA(GPU-0): 
[    12.871] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    12.871] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[    12.871] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
[    12.871] (--) NVIDIA(GPU-0): 
[    12.873] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    12.873] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[    12.873] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[    12.873] (--) NVIDIA(GPU-0): 
[    13.009] (==) NVIDIA(0): 
[    13.009] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    13.009] (==) NVIDIA(0):     will be used as the requested mode.
[    13.009] (==) NVIDIA(0): 
[    13.010] (II) NVIDIA(0): Validated MetaModes:
[    13.010] (II) NVIDIA(0):     "DFP-2:nvidia-auto-select"
[    13.010] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    13.092] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config
[    13.092] (--) NVIDIA(0):     option
[    13.092] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    13.092] (==) modeset(G0): RGB weight 888
[    13.092] (==) modeset(G0): Default visual is TrueColor
[    13.092] (II) Loading sub module "glamoregl"
[    13.092] (II) LoadModule: "glamoregl"
[    13.092] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    13.102] (II) Module glamoregl: vendor="X.Org Foundation"
[    13.102] 	compiled for 1.21.1.3, module version = 1.0.1
[    13.102] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.504] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (CML GT2)
[    13.504] (II) modeset(G0): glamor initialized
[    13.505] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    13.507] (II) modeset(G0): EDID for output eDP-1-1
[    13.507] (II) modeset(G0): Manufacturer: SHP  Model: 14c5  Serial#: 0
[    13.507] (II) modeset(G0): Year: 2019  Week: 9
[    13.507] (II) modeset(G0): EDID Version: 1.4
[    13.507] (II) modeset(G0): Digital Display Input
[    13.507] (II) modeset(G0): 8 bits per channel
[    13.507] (II) modeset(G0): Digital interface is DisplayPort
[    13.507] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    13.507] (II) modeset(G0): Gamma: 2.20
[    13.507] (II) modeset(G0): No DPMS capabilities specified
[    13.507] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[    13.507] (II) modeset(G0): Default color space is primary color space
[    13.507] (II) modeset(G0): First detailed timing is preferred mode
[    13.507] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    13.507] (II) modeset(G0): Display is continuous-frequency
[    13.507] (II) modeset(G0): redX: 0.640 redY: 0.329   greenX: 0.300 greenY: 0.600
[    13.507] (II) modeset(G0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[    13.507] (II) modeset(G0): Manufacturer's mask: 0
[    13.507] (II) modeset(G0): Supported detailed timing:
[    13.507] (II) modeset(G0): clock: 533.3 MHz   Image Size:  344 x 194 mm
[    13.507] (II) modeset(G0): h_active: 1920  h_sync: 1944  h_sync_end 1984 h_blank_end 2000 h_border: 0
[    13.507] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    13.507] (II) modeset(G0): Supported detailed timing:
[    13.507] (II) modeset(G0): clock: 133.3 MHz   Image Size:  344 x 194 mm
[    13.507] (II) modeset(G0): h_active: 1920  h_sync: 1944  h_sync_end 1984 h_blank_end 2000 h_border: 0
[    13.507] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    13.507] (II) modeset(G0): Monitor name: LQ156M1JW03
[    13.507] (II) modeset(G0): EDID (in hex):
[    13.507] (II) modeset(G0): 	00ffffffffffff004d10c51400000000
[    13.507] (II) modeset(G0): 	091d0104a522137807de50a3544c9926
[    13.507] (II) modeset(G0): 	0f505400000001010101010101010101
[    13.507] (II) modeset(G0): 	01010101010150d0805070381f401828
[    13.507] (II) modeset(G0): 	350058c2100000181434805070381f40
[    13.507] (II) modeset(G0): 	1828350058c210000018000000100000
[    13.507] (II) modeset(G0): 	000000000000000000000000000000fc
[    13.507] (II) modeset(G0): 	004c513135364d314a5730330a2000e4
[    13.507] (II) modeset(G0): Printing probed modes for output eDP-1-1

Hors ligne

Pages : 1