Pages : 1
#1 Le 26/04/2022, à 12:48
- hervax
Ubuntu sur ACER Swift 5 (SF514-52T 56JV)
Bonjour,
Voici juste un retour sur l'installation d'Ubuntu sur ce modèle Acer de 2018 (Ubuntu 18.04 à 22.04 inclus).
* Pas de difficultés particulière pour l'installation, y compris en dual-boot avec Windows
* Presque tout fonctionne "out of the box", y compris l'écran tactile
* Deux problèmes demeurent :
Le lecteur d'empreinte (Egistec 1c7a:0570) n'est pas reconnu, et il semble peu probable qu'il le soit un jour : Voir ici
La carte son (Sunrise Point-LP HP Audio 8086:9D71) n'est pas reconnue immédiatement. Pour la faire fonctionner, il faut ajouter la ligne ci-dessous au fichier /etc/modprobe.d/alsa-base.conf (le créer si besoin)
options snd-hda-intel dmic_detect=0Le microphone intégré ne fonctionnera pas (délicat pour la visio), mais on peut utiliser un micro externe.
Acer Swift 5 Dual Boot Win11 - Ubuntu 24.04.1
Hors ligne
#2 Le 27/04/2022, à 05:32
- malbo
Re : Ubuntu sur ACER Swift 5 (SF514-52T 56JV)
Bonjour,
Ce modèle SF514-52T-56JV est déjà mentionné dans la Liste des portables « Acer »
Je souhaiterais voir ton dual-boot : je te prie de faire un Boot-info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-info dans ta réponse.
Hors ligne
#3 Le 31/12/2023, à 10:47
- hervax
Re : Ubuntu sur ACER Swift 5 (SF514-52T 56JV)
Hello malbo,
Désolé pour le déterrage, je ne surveillais pas ce fil ;-) Je poste ici le rapport boot-info, au cas où : https://paste.ubuntu.com/p/6XBxqgtSgz/
Bonne année 2024 !
RV
Acer Swift 5 Dual Boot Win11 - Ubuntu 24.04.1
Hors ligne
#4 Le 31/12/2023, à 10:50
- xubu1957
Re : Ubuntu sur ACER Swift 5 (SF514-52T 56JV)
Bonjour,
Collage du Boot-info :
boot-info-4ppa2075 [20231231_1043]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/nvme0n1.
=> No boot loader is installed in the MBR of /dev/sda.
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/mmx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg
/efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/cbmr_driver.efi
/efi/OEM/Boot/bootmgfw.efi /efi/OEM/Boot/bootmgr.efi
nvme0n1p2: _____________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
nvme0n1p3: _____________________________________________________________________
File system: ntfs
Boot sector type: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /Windows/System32/winload.exe
nvme0n1p4: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
nvme0n1p5: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
nvme0n1p6: _____________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
nvme0n1p7: _____________________________________________________________________
File system: ntfs
Boot sector type: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
================================ 2 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.3 LTS on nvme0n1p4
OS#2: Windows 8 or 10 on nvme0n1p3
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: UHD Graphics 620 from Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-6.2.0-39-generic root=UUID=1dca81a8-5505-43bd-a401-88970b99c753 ro quiet splash vt.handoff=7
df -Th / : /dev/nvme0n1p4 ext4 41G 29G 9,4G 76% /
===================================== UEFI =====================================
BIOS/UEFI firmware: V1.11(1.11) from Insyde Corp.
The firmware is EFI-compatible, and is set in EFI-mode for this installed-session.
SecureBoot disabled (confirmed by mokutil).
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0003,0001,0000,0005,0004,0002,2001,2002,2003
Boot0000* ubuntu HD(1,GPT,9a7c8c39-656a-4655-b885-4247f2bca839,0x800,0x32000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot0001* ubuntu HD(1,GPT,9a7c8c39-656a-4655-b885-4247f2bca839,0x800,0x32000)/File(\EFI\ubuntu\grubx64.efi)
Boot0002* Ubuntu PciRoot(0x0)/Pci(0x1d,0x0)/Pci(0x0,0x0)/NVMe(0x1,00-25-38-43-31-41-50-08)/HD(1,GPT,9a7c8c39-656a-4655-b885-4247f2bca839,0x800,0x32000)/File(\EFI\ubuntu\shimx64.efi)A01 ).
Boot0003* Ubuntuy PciRoot(0x0)/Pci(0x17,0x0)/Sata(2,0,0)/HD(1,GPT,21ef9140-90ee-4618-bb63-0a4f94f785f6,0x800,0x32000)/File(\EFI\ubuntu\grubx64.efi)A01 ..
Boot0004* Yes PciRoot(0x0)/Pci(0x17,0x0)/Sata(2,0,0)/HD(1,GPT,21ef9140-90ee-4618-bb63-0a4f94f785f6,0x800,0x32000)/File(\EFI\ubuntu\grubx64.efi)A01 ..
Boot0005* Windows Boot Manager HD(1,GPT,9a7c8c39-656a-4655-b885-4247f2bca839,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...4................
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 34 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
nvme0n1p4 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ng, update-grub, end-after-100GB
nvme0n1p7 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
nvme0n1p5 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
nvme0n1p3 : is-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
nvme0n1p1 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
Partitions info (2/3): _________________________________________________________
nvme0n1p4 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p7 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
nvme0n1p5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
nvme0n1p4 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, customized, nvme0n1
nvme0n1p7 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p5 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p3 : not--sepboot, no-kernel, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
sda2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 91E982C1-EF63-4A83-8FF9-969D9CD46352
Start End Sectors Size Type
sda1 34 262177 262144 128M Microsoft reserved
sda2 264192 3907028991 3906764800 1.8T Microsoft basic data
Disk nvme0n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 4C0A88D8-8120-4EFC-BF5E-B9785FFDA9C2
Start End Sectors Size Type
nvme0n1p1 2048 206847 204800 100M EFI System
nvme0n1p2 206848 239615 32768 16M Microsoft reserved
nvme0n1p3 239616 491999231 491759616 234.5G Microsoft basic data
nvme0n1p4 491999232 578013183 86013952 41G Linux filesystem
nvme0n1p5 578015232 1935804415 1357789184 647.4G Linux filesystem
nvme0n1p6 1935804416 1951428607 15624192 7.5G Linux swap
nvme0n1p7 1951428608 1953523711 2095104 1023M Windows recovery environment
parted -lm (filtered): _________________________________________________________
sda:2000GB:scsi:512:512:gpt:ATA WDC WDS200T2B0B:;
1:17.4kB:134MB:134MB::Microsoft reserved partition:msftres;
2:135MB:2000GB:2000GB:ntfs:Basic data partition:msftdata;
nvme0n1:1000GB:nvme:512:512:gpt:Samsung SSD 990 PRO 1TB:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:252GB:252GB:ntfs:Basic data partition:msftdata;
4:252GB:296GB:44.0GB:ext4::;
5:296GB:991GB:695GB:ext4::;
6:991GB:999GB:8000MB:linux-swap(v1)::swap;
7:999GB:1000GB:1073MB:ntfs:Basic data partition:hidden, diag;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ea029dbe-c1b4-4a8c-8d63-b952dca5064c Microsoft reserved partition
└─sda2 ntfs A4A45DF2A45DC806 f54e7c24-d5b8-47bf-8136-81a2bf9e7cd0 HDD2 Basic data partition
nvme0n1
├─nvme0n1p1 vfat EEDE-A2EC 9a7c8c39-656a-4655-b885-4247f2bca839 ESP EFI system partition
├─nvme0n1p2 fbb5a6ce-ab9a-4798-9645-49f8a2e0d275 Microsoft reserved partition
├─nvme0n1p3 ntfs A68AE4218AE3EC2D e7e40da5-8606-4e71-916d-efc9e043fa51 Acer Basic data partition
├─nvme0n1p4 ext4 1dca81a8-5505-43bd-a401-88970b99c753 2d5342b6-9d11-45c7-8742-2251683714d6
├─nvme0n1p5 ext4 0724b7c6-ea21-41b1-9658-4efb2a6a72ad 6fe4a433-62d2-4915-9215-5e767a074a1b
├─nvme0n1p6 swap 152a5aaf-7f72-414d-a40f-775d1ea71769 07037220-782c-42ee-8a65-1404d2591bdf
└─nvme0n1p7 ntfs 765A63B75A637333 0ef68f17-961b-4512-b956-240afa67a483 Basic data partition
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/nvme0n1p3 67G 71% /mnt/boot-sav/nvme0n1p3
/dev/nvme0n1p4 9.3G 72% /
/dev/nvme0n1p5 492.9G 17% /home
/dev/nvme0n1p7 206M 80% /mnt/boot-sav/nvme0n1p7
/dev/sda2 1T 44% /mnt/boot-sav/sda2
Mount options (filtered): ______________________________________________________
/dev/nvme0n1p3 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/nvme0n1p4 ext4 rw,relatime,errors=remount-ro
/dev/nvme0n1p5 ext4 rw,relatime
/dev/nvme0n1p7 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda2 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
=================== nvme0n1p1/efi/ubuntu/grub.cfg (filtered) ===================
search.fs_uuid 1dca81a8-5505-43bd-a401-88970b99c753 root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
=================== nvme0n1p4/boot/grub/grub.cfg (filtered) ====================
Windows 11 osprober-efi-EEDE-A2EC
Ubuntu 22.04 1dca81a8-5505-43bd-a401-88970b99c753
BIOS uefi-firmware
======================== nvme0n1p4/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb5 during installation
UUID=1dca81a8-5505-43bd-a401-88970b99c753 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=EEDE-A2EC /boot/efi vfat umask=0077 0 1
# /home was on /dev/sdb7 during installation
UUID=0724b7c6-ea21-41b1-9658-4efb2a6a72ad /home ext4 defaults 0 2
# swap was on /dev/sdb6 during installation
UUID=152a5aaf-7f72-414d-a40f-775d1ea71769 none swap sw 0 0
==================== nvme0n1p4/etc/default/grub (filtered) =====================
GRUB_DEFAULT="saved"
GRUB_TIMEOUT_STYLE="menu"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_GFXMODE="1920x1080"
GRUB_DISABLE_OS_PROBER="false"
GRUB_SAVEDEFAULT="true"
export GRUB_MENU_PICTURE="/home/herve/Images/Wallpapers/B787AF.png"
export GRUB_COLOR_NORMAL="dark-gray/black"
export GRUB_COLOR_HIGHLIGHT="green/white"
GRUB_THEME="/boot/grub/themes/ubuntu/theme.txt"
================= nvme0n1p4: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
268,982410431 = 288,817664000 boot/grub/grub.cfg 1
240,139801025 = 257,848147968 boot/vmlinuz 2
256,309642792 = 275,210383360 boot/vmlinuz-5.15.0-91-generic 2
260,324844360 = 279,521673216 boot/vmlinuz-6.2.0-37-generic 6
240,139801025 = 257,848147968 boot/vmlinuz-6.2.0-39-generic 2
256,309642792 = 275,210383360 boot/vmlinuz.old 2
264,295028687 = 283,784626176 boot/initrd.img 34
257,576435089 = 276,570591232 boot/initrd.img-5.15.0-91-generic 43
266,781387329 = 286,454333440 boot/initrd.img-6.2.0-37-generic 11
264,295028687 = 283,784626176 boot/initrd.img-6.2.0-39-generic 34
257,576435089 = 276,570591232 boot/initrd.img.old 43
=================== nvme0n1p4: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 710 Aug 10 16:54 10_linux_proxy
-rwxr-xr-x 1 root root 169 Aug 10 16:54 40_custom_proxy
-rwxr-xr-x 1 root root 712 Aug 10 16:54 41_linux_proxy
-rwxr-xr-x 1 root root 191 Aug 10 16:54 42_uefi-firmware_proxy
-rwxr-xr-x 1 root root 43031 Dec 18 2022 43_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 44_linux_xen
-rwxr-xr-x 1 root root 202 Aug 10 16:54 45_os-prober_proxy
-rwxr-xr-x 1 root root 215 Aug 10 16:54 46_custom_proxy
-rwxr-xr-x 1 root root 215 Dec 18 2022 47_custom
drwxr-xr-x 4 root root 4096 Aug 10 00:16 backup
drwxr-xr-x 2 root root 4096 Aug 10 00:26 bin
drwxr-xr-x 2 root root 4096 Aug 10 16:54 proxifiedScripts
=============== nvme0n1p4/etc/grub.d/40_custom_proxy (filtered) ================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/custom' | /etc/grub.d/bin/grubcfg_proxy "-*
-#text
+'Windows 11'~72c2acc2641d3f7878722b23dca15d5c~
"
================ nvme0n1p4/etc/grub.d/41_linux_proxy (filtered) ================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/linux' | /etc/grub.d/bin/grubcfg_proxy "+'Ubuntu'~bd722f42fb308faaf6e3d1a0f7b4a0b9~ as 'Ubuntu 22.04'
-*
-#text
+'SUBMENU' as 'Options avancées pour Ubuntu'{+'Advanced options for Ubuntu'/*, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 6.2.0-26-generic'~463d41e58a9cd534be4bf163196ba42c~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 6.2.0-26-generic (recovery mode)'~d6497f2f98019cf585b92fffb99f27e4~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-78-generic'~637811bf430c6ab1a7f1492761bc6775~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-78-generic (recovery mode)'~329aa46d78fb6103086ac100c71839f4~}
"
============ nvme0n1p4/etc/grub.d/42_uefi-firmware_proxy (filtered) ============
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/uefi-firmware' | /etc/grub.d/bin/grubcfg_proxy "+*
+'UEFI Firmware Settings'~4e15a6547b9250de59821b594ecf5dee~ as 'BIOS'
"
================= nvme0n1p4/etc/grub.d/43_linux_zfs (filtered) =================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2019 Canonical Ltd.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${pkgdatadir}/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
set -u
## Skip early if zfs utils isn't installed (instead of failing on first zpool list)
if ! `which zfs >/dev/null 2>&1`; then
exit 0
fi
imported_pools=""
MNTDIR="$(mktemp -d ${TMPDIR:-/tmp}/zfsmnt.XXXXXX)"
ZFSTMP="$(mktemp -d ${TMPDIR:-/tmp}/zfstmp.XXXXXX)"
machine="$(uname -m)"
case "${machine}" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="${machine}" ;;
esac
RC=0
on_exit() {
# Restore initial zpool import state
for pool in ${imported_pools}; do
zpool export "${pool}"
done
mountpoint -q "${MNTDIR}" && umount "${MNTDIR}" || true
rmdir "${MNTDIR}"
rm -rf "${ZFSTMP}"
exit "${RC}"
}
trap on_exit EXIT INT QUIT ABRT PIPE TERM
# List ONLINE and DEGRADED pools
import_pools() {
# We have to ignore zpool import output, as potentially multiple / will be available,
# and we need to autodetect all zpools this way with their real mountpoints.
local initial_pools="$(zpool list | awk '{if (NR>1) print $1}')"
local all_pools=""
local imported_pools=""
local err=""
set +e
err="$(zpool import -f -a -o cachefile=none -o readonly=on -N 2>&1)"
# Only print stderr if the command returned an error
# (it can echo "No zpool to import" with success, which we don't want)
if [ $? -ne 0 ]; then
echo "Some pools couldn't be imported and will be ignored:\n${err}" >&2
fi
set -e
all_pools="$(zpool list | awk '{if (NR>1) print $1}')"
for pool in ${all_pools}; do
if echo "${initial_pools}" | grep -wq "${pool}"; then
continue
fi
imported_pools="${imported_pools} ${pool}"
done
echo "${imported_pools}"
}
# List all the dataset with a root mountpoint
get_root_datasets() {
local pools="$(zpool list | awk '{if (NR>1) print $1}')"
for p in ${pools}; do
local rel_pool_root=$(zpool get -H altroot ${p} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root="/"
fi
zfs list -H -o name,canmount,mountpoint -t filesystem | grep -E '^'"${p}"'(\s|/[[:print:]]*\s)(on|noauto)\s'"${rel_pool_root}"'$' | awk '{print $1}'
done
}
# find if given datasets can be mounted for directory and return its path (snapshot or real path)
# $1 is our current dataset name
# $2 directory path we look for (cannot contains /)
# $3 is the temporary mount directory to use
# $4 is the optional snapshot name
# return path for directory (which can be a mountpoint)
validate_system_dataset() {
local dataset="$1"
local directory="$2"
local mntdir="$3"
local snapshot_name="$4"
local mount_path="${mntdir}/${directory}"
if ! zfs list "${dataset}" >/dev/null 2>&1; then
return
fi
if ! mount -o noatime,zfsutil -t zfs "${dataset}" "${mount_path}"; then
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset}@${snapshot_name}'. Ignoring"
return
fi
local candidate_path="${mount_path}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${dataset}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}"
fi
if [ -n "$(ls "${candidate_path}" 2>/dev/null)" ]; then
echo "${candidate_path}"
return
else
mountpoint -q "${mount_path}" && umount "${mount_path}" || true
fi
}
# Detect system directory relevant to the other, trying to find the ones associated on the current dataset or snapshot/
# System directory should be at most a direct child dataset of main datasets (no recursivity)
# We can fallback trying other zfs pools if no match has been found.
# $1 is our current dataset name (which can have @snapshot name)
# $2 directory path we look for (cannot contains /)
# $3 restrict_to_same_pool (true|false) force looking for dataset with the same basename in the current dataset pool only
# $4 is the temporary mount directory to use
# $5 is the optional etc directory (if not $2 is not etc itself)
# return path for directory (which can be a mountpoint)
get_system_directory() {
local dataset_path="$1"
local directory="$2"
local restrict_to_same_pool="$3"
local mntdir="$4"
local etc_dir="$5"
if [ -z "${etc_dir}" ]; then
etc_dir="${mntdir}/etc"
fi
local candidate_path="${mntdir}/${directory}"
# 1. Look for /etc/fstab first (which will mount even on top of non empty $directory)
local mounted_fstab_entry="false"
if [ -f "${etc_dir}/fstab" ]; then
mount_args=$(awk '/^[^#].*[ \t]\/'"${directory}"'[ \t]/ {print "-t", $3, $1}' "${etc_dir}/fstab")
if [ -n "${mount_args}" ]; then
mounted_fstab_entry="true"
mount -o noatime ${mount_args} "${candidate_path}" || mounted_fstab_entry="false"
fi
fi
# If directory isn't empty. Only count if coming from /etc/fstab. Will be
# handled below otherwise as we are interested in potential snapshots.
if [ "${mounted_fstab_entry}" = "true" -a -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2. Handle zfs case, which can be a snapshots.
local base_dataset_path="${dataset_path}"
local snapshot_name=""
# For snapshots we extract the parent dataset
if echo "${dataset_path}" | grep -q '@'; then
base_dataset_path=$(echo "${dataset_path}" | cut -d '@' -f1)
snapshot_name=$(echo "${dataset_path}" | cut -d '@' -f2)
fi
base_dataset_name="${base_dataset_path##*/}"
base_pool="$(echo "${base_dataset_path}" | cut -d'/' -f1)"
# 2.a) Look for child dataset included in base dataset, which needs to hold same snapshot if any
candidate_path=$(validate_system_dataset "${base_dataset_path}/${directory}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
# 2.b) Look for current dataset (which is already mounted as /)
candidate_path="${mntdir}/${directory}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${base_dataset_path}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}/${directory}"
fi
if [ -n "$(ls "${candidate_path}" 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2.c) Look for every datasets in every pool which isn't the current dataset which holds:
# - the same dataset name (last section) than our base_dataset_name
# - mountpoint=directory
# - canmount!=off
all_same_base_dataset_name="$(zfs list -H -t filesystem -o name,canmount | awk '/^[^ ]+\/'"${base_dataset_name}"'[ \t](on|noauto)/ {print $1}') "
# order by local pool datasets first
current_pool_same_base_datasets=""
other_pools_same_base_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_same_base_dataset_name}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_same_base_datasets="${current_pool_same_base_datasets} ${d}"
else
other_pools_same_base_datasets="${other_pools_same_base_datasets} ${d}"
fi
done
ordered_same_base_datasets="${current_pool_same_base_datasets} ${other_pools_same_base_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_same_base_datasets="${current_pool_same_base_datasets}"
fi
# now, loop over them
for d in ${ordered_same_base_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${candidate_dataset}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
# 2.d) If we didn't find anything yet: check for persistent datasets corresponding to our mountpoint, with canmount=on without any snapshot associated:
# Note: we go over previous datasets as well, but this is ok, as we didn't include them before.
all_mountable_datasets="$(zfs list -t filesystem -o name,canmount | awk '/^[^ ]+[ \t]+on/ {print $1}')"
# order by local pool datasets first
current_pool_datasets=""
other_pools_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_mountable_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_datasets="${current_pool_datasets} ${d}"
else
other_pools_datasets="${other_pools_datasets} ${d}"
fi
done
ordered_datasets="${current_pool_datasets} ${other_pools_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_datasets="${current_pool_datasets}"
fi
for d in ${ordered_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${d}" "${directory}" "${mntdir}" "")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset_path}'. Ignoring"
return
}
# Try our default layout bpool as a prefered layout (fast path)
# This is get_system_directory for boot optimized for our default installation layout
# $1 is our current dataset name (which can have @snapshot name)
# $2 is the temporary mount directory to use
# return path for directory (which can be a mountpoint) if found
try_default_layout_bpool() {
local root_dataset_path="$1"
local mntdir="$2"
dataset_basename="${root_dataset_path##*/}"
candidate_dataset="bpool/BOOT/${dataset_basename}"
dataset_properties="$(zfs get -H mountpoint,canmount "${candidate_dataset}" 2>/dev/null | cut -f3 | paste -sd ' ')"
if [ -z "${dataset_properties}" ]; then
return
fi
rel_pool_root=$(zpool get -H altroot bpool | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
snapshot_name="${dataset_basename##*@}"
[ "${snapshot_name}" = "${dataset_basename}" ] && snapshot_name=""
if [ -z "${snapshot_name}" ]; then
if ! echo "${dataset_properties}" | grep -Eq "${rel_pool_root}/boot (on|noauto)"; then
return
fi
else
candidate_dataset=$(echo "${candidate_dataset}" | cut -d '@' -f1)
fi
validate_system_dataset "${candidate_dataset}" "boot" "${mntdir}" "${snapshot_name}"
}
# Return if secure boot is enabled on that system
is_secure_boot_enabled() {
if LANG=C mokutil --sb-state 2>/dev/null | grep -qi enabled; then
echo "true"
return
fi
echo "false"
return
}
# Given a filesystem or snapshot dataset, returns dataset|machine id|pretty name|last used
# $1 is dataset we want information from
# $2 is the temporary mount directory to use
get_dataset_info() {
local dataset="$1"
local mntdir="$2"
local base_dataset="${dataset}"
local etc_dir="${mntdir}/etc"
local is_snapshot="false"
# For snapshot we extract the parent dataset
if echo "${dataset}" | grep -q '@'; then
base_dataset=$(echo "${dataset}" | cut -d '@' -f1)
is_snapshot="true"
fi
mount -o noatime,zfsutil -t zfs "${base_dataset}" "${mntdir}"
# read machine-id/os-release from /etc
etc_dir=$(get_system_directory "${dataset}" "etc" "true" "${mntdir}" "")
if [ -z "${etc_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
umount "${mntdir}"
return
fi
machine_id=""
if [ -f "${etc_dir}/machine-id" ]; then
machine_id=$(cat "${etc_dir}/machine-id")
fi
# We have to use a random temporary id if we don't have any machine-id file or if this one is empty
# (mostly the case of new installations before first boot).
# Let's use the dataset name directly for this.
# Consequence is that all datasets are then separated.
if [ -z "${machine_id}" ]; then
machine_id="${dataset}"
fi
pretty_name=$(. "${etc_dir}/os-release" && echo "${PRETTY_NAME}")
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
# read available kernels from /boot
boot_dir="$(try_default_layout_bpool "${dataset}" "${mntdir}")"
if [ -z "${boot_dir}" ]; then
boot_dir=$(get_system_directory "${dataset}" "boot" "false" "${mntdir}" "${etc_dir}")
fi
if [ -z "${boot_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
umount "${mntdir}"
return
fi
initrd_list=""
kernel_list=""
candidate_kernel_list="$(find "${boot_dir}" -maxdepth 1 -type f -regex '.*/\(vmlinuz\|vmlinux\|kernel\)-.*')"
while [ -n "${candidate_kernel_list}" ] ; do
list_basename="$(echo "${candidate_kernel_list}" | sed -e 's#.*/##')"
linux=$(version_find_latest ${list_basename})
linux=$(echo "${candidate_kernel_list}" | while read k; do
if [ "$(basename "${k}")" = "${linux}" ]; then
echo -n "${k}"
break
fi
done)
# || true to not abort even if candidate_kernel_list is empty on last entry
candidate_kernel_list="$(echo "${candidate_kernel_list}" | fgrep -vx "${linux}"||true)"
if ! grub_file_is_not_garbage "${linux}" ; then
continue
fi
# Filters entry if efi/non efi.
# Note that for now we allow kernel without .efi.signed as those are signed kernel
# on ubuntu, loaded by the shim.
case "${linux}" in
*.efi.signed)
if [ "$(is_secure_boot_enabled)" = "false" ]; then
continue
fi
;;
esac
linux_basename=$(basename "${linux}")
linux_dirname=$(dirname "${linux}")
version=$(echo "${linux_basename}" | sed -e "s,^[^0-9]*-,,g")
alt_version=$(echo "${version}" | sed -e "s,\.old$,,g")
gettext_printf "Found linux image: %s in %s\n" "${linux_basename}" "${dataset}" >&2
initrd=""
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${linux_dirname}/${i}" ; then
initrd="$i"
break
fi
done
if test -z "${initrd}" ; then
grub_warn "Couldn't find any valid initrd for dataset ${dataset}."
continue
fi
gettext_printf "Found initrd image: %s in %s\n" "${initrd}" "${dataset}" >&2
rel_linux_dirname=$(make_system_path_relative_to_its_root "${linux_dirname}")
initrd_list="${initrd_list}|${rel_linux_dirname}/${initrd}"
kernel_list="${kernel_list}|${rel_linux_dirname}/${linux_basename}"
done
initrd_list="${initrd_list#|}"
kernel_list="${kernel_list#|}"
initrd_device=$(${grub_probe} --target=device "${boot_dir}" | head -1)
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
# We needed to look in / for snapshots on root dataset, umount there before zfs lazily unmount it
case "${boot_dir}" in /boot/.zfs/snapshot/*)
umount "${boot_dir}" || true
;;
esac
# for zsys snapshots: we want to know which kernel we successful last booted with
last_booted_kernel=$(zfs get -H com.ubuntu.zsys:last-booted-kernel "${dataset}" | awk -v FS='\t' '{print $3}')
# snapshot: last_used is dataset creation time
if [ "${is_snapshot}" = "true" ]; then
last_used="$(zfs get -pH creation "${dataset}" | awk -F '\t' '{print $3}')"
# otherwise, last_used is manually marked at boot/shutdown on a root dataset for zsys
else
# if current system, take current time
if zfs mount | awk '/[ \t]+\/$/ {print $1}' | grep -q "${dataset}"; then
last_used=$(date +%s)
else
last_used=$(zfs get -H com.ubuntu.zsys:last-used "${dataset}" | awk '{print $3}')
# case of non zsys, or zsys without annotation, take /etc/machine-id stat (as we mounted with noatime).
# However, as systems can be relatime, if system is current mounted one, set current time (case of clone + reboot
# within the same d).
if [ "${last_used}" = "-" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/os-release")
if [ -f "${mntdir}/etc/machine-id" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/machine-id")
fi
fi
fi
fi
is_zsys=$(zfs get -H com.ubuntu.zsys:bootfs "${base_dataset}" | awk '{print $3}')
if [ -n "${initrd_list}" -a -n "${kernel_list}" ]; then
echo "${dataset}\t${is_zsys}\t${machine_id}\t${pretty_name}\t${last_used}\t${initrd_device}\t${initrd_list}\t${kernel_list}\t${last_booted_kernel}"
else
grub_warn "didn't find any valid initrd or kernel."
fi
umount "${mntdir}" || true
# We needed to look in / for snapshots on root dataset, umount the snapshot for etc before zfs lazily unmount it
case "${etc_dir}" in /.zfs/snapshot/*/etc)
snapshot_path="$(findmnt -n -o TARGET -T "${etc_dir}")"
umount "${snapshot_path}" || true
;;
esac
}
# Scan available boot options and returns in a formatted list
# $1 is the temporary mount directory to use
bootlist() {
local mntdir="$1"
local boot_list=""
for dataset in $(get_root_datasets); do
# get information from current root dataset
boot_list="${boot_list}$(get_dataset_info "${dataset}" ${mntdir})\n"
# get information from snapshots of this root dataset
snapshots="$(zfs list -H -o name -t snapshot "${dataset}"|while read snapshot_dataset; do
get_dataset_info "${snapshot_dataset}" ${mntdir}
done)"
[ -n "${snapshots}" ] && boot_list="${boot_list}${snapshots}\n"
done
echo "${boot_list}"
}
# Order machine ids by last_used from their main entry
get_machines_sorted() {
local bootlist="$1"
local machineids="$(echo "${bootlist}" | awk '{print $3}' | sort -u)"
for machineid in ${machineids}; do
echo "${bootlist}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print $5, $3}' | sort -nr | grep -E "[^^]\b${machineid}\b" | head -1
done | sort -nr | awk '{print $2}'
}
# Sort entries by last_used for a given machineid
sort_entries_for_machineid() {
local bootlist="$1"
local machineid="$2"
tab="$(printf '\t')"
echo "${bootlist}" | grep -E "[^^]\b${machineid}\b" | sort -k5,5r -k1,1 -t "${tab}"
}
# Return main entry index
get_main_entry() {
local entries="$1"
echo "${entries}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print}' | head -1
}
# Return specific field at index from entry
get_field_from_entry() {
local entry="$1"
local index="$2"
echo "${entry}" | awk "BEGIN{FS=\"\t\"} {print \$$index}"
}
# Get the main entry metadata
main_entry_meta() {
local main_entry="$1"
initrd=$(get_field_from_entry "${main_entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${main_entry}" 8 | cut -d'|' -f1)
# Take first element (most recent entry) which is not a snapshot
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"main\", \$4, \$1, \$6, \"$initrd\", \"$kernel\"}"
}
# Get advanced entries metadata
advanced_entries_meta() {
local main_entry="$1"
last_used_kernel="$(get_field_from_entry "${main_entry}" 9 )"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
oldIFS="$IFS"
export IFS='|'
set -- $(get_field_from_entry "${main_entry}" 7)
for kernel in $(get_field_from_entry "${main_entry}" 8); do
# get initrd and pop to the next one
initrd="$1"; shift
was_last_used_kernel="false"
kernel_basename=$(basename "${kernel}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
was_last_used_kernel="true"
fi
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"advanced\", \$4, \$1, \$6, \"$initrd\", \"$kernel\", \"$was_last_used_kernel\"}"
done
IFS="$oldIFS"
}
# Get history metadata
history_entries_meta() {
local entries="$1"
local main_dataset_name="$2"
local main_dataset_releasename="$3"
if [ -z "${entries}" ]; then
return
fi
# Traverse snapshots and clones
echo "${entries}" | while read entry; do
name=""
# Compute snapshot/filesystem dataset name
snap_dataset_name="$(get_field_from_entry "${entry}" 1)"
snapname="${snap_dataset_name##*@}"
# If, this is a clone, take what is after main_dataset_name
if [ "${snapname}" = "${snap_dataset_name}" ]; then
snapname="${snap_dataset_name##${main_dataset_name}_}"
# Handle manual user clone (not prefixed by "main_dataset_name")
snapname="${snapname##*/}"
fi
# We keep the snapname only if it is not only a zsys auto snapshot
if echo "${snapname}" | grep -q "^autozsys_"; then
snapname=""
fi
# We store the release only if it different from main dataset release (snapshot before a release upgrade)
releasename=$(get_field_from_entry "${entry}" 4)
if [ "${releasename}" = "${main_dataset_releasename}" ]; then
releasename=""
fi
# Snapshot date
foo="$(get_field_from_entry "${entry}" 5)"
snapdate="$(date -d @$(get_field_from_entry "${entry}" 5) "+%x @ %H:%M")"
# For snapshots/clones the name can have the following formats:
# <DATE>: autozsys, same release
# <OLD_RELEASE> on <DATE>: autozsys, different release
# <SNAPNAME> on <DATE>: Manual snapshot, same release
# <SNAPNAME>, <OLD_RELEASE> on <DATE>: Manual snapshot, different release
if [ "${snapname}" = "" -a "${releasename}" = "" ]; then
name="${snapdate}"
elif [ "${snapname}" = "" -a "${releasename}" != "" ]; then
name=$(gettext_printf "%s on %s" "${releasename}" "${snapdate}")
elif [ "${snapname}" != "" -a "${releasename}" = "" ]; then
name=$(gettext_printf "%s on %s" "${snapname}" "${snapdate}")
else # snapname != "" && releasename != ""
name=$(gettext_printf "%s, %s on %s" "${snapname}" "${releasename}" "${snapdate}")
fi
# Choose kernel and initrd if the snapshot was booted successfully on a specific kernel before
# Take latest by default if no match
initrd=$(get_field_from_entry "${entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${entry}" 8 | cut -d'|' -f1)
last_used_kernel="$(get_field_from_entry "${entry}" 9)"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
oldIFS="$IFS"
export IFS='|'
set -- $(get_field_from_entry "${entry}" 7)
for k in $(get_field_from_entry "${entry}" 8); do
# get initrd and pop to the next one
candidate_initrd="$1"; shift
kernel_basename=$(basename -- "${k}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
kernel="${k}"
initrd="${candidate_initrd}"
break
fi
done
IFS="$oldIFS"
echo "${entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"history\", \"$name\", \$1, \$6, \"$initrd\", \"$kernel\"}"
done
}
# Generate metadata from a BOOTLIST that will subsequently used to generate
# the final grub menu entries
generate_grub_menu_metadata() {
local bootlist="$1"
# Sort machineids by last_used from their main entry
for machineid in $(get_machines_sorted "${bootlist}"); do
entries="$(sort_entries_for_machineid "${bootlist}" ${machineid})"
main_entry="$(get_main_entry "${entries}")"
if [ -z "$main_entry" ]; then
continue
fi
main_entry_meta "${main_entry}"
advanced_entries_meta "${main_entry}"
main_dataset_name="$(get_field_from_entry "${main_entry}" 1)"
main_dataset_releasename="$(get_field_from_entry "${main_entry}" 4)"
# grep -v errcode != 0 if there is no match. || true to not fail with -e
other_entries="$(echo "${entries}" | grep -v "${main_entry}" || true)"
history_entries_meta "${other_entries}" "${main_dataset_name}" "${main_dataset_releasename}"
done
}
# Print the configuration part common to all sections
# Note:
# If 10_linux runs these part will be defined twice in grub configuration
print_menu_prologue() {
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "${vt_handoff}" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
GRUB_GFXPAYLOAD_LINUX="${GRUB_GFXPAYLOAD_LINUX:-}"
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 0 ]; then
echo "set linux_gfx_mode=${GRUB_GFXPAYLOAD_LINUX}"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
}
# Cache for prepare_grub_to_access_device call
# $1: boot_device
# $2: submenu_level
prepare_grub_to_access_device_cached() {
local boot_device="$1"
local submenu_level="$2"
local boot_device_idx="$(echo ${boot_device} | tr '/' '_')"
cache_file="${ZFSTMP}/$(echo boot_device${boot_device_idx})"
if [ ! -f "${cache_file}" ]; then
set +u
echo "$(prepare_grub_to_access_device "${boot_device}")" > "${cache_file}"
set -u
for i in 0 1 2; do
submenu_indentation="$(printf %${i}s | tr " " "${grub_tab}")"
sed "s/^/${submenu_indentation} /" "${cache_file}" > "${cache_file}--${i}"
done
fi
cat "${cache_file}--${submenu_level}"
}
# Print a grub menu entry
zfs_linux_entry () {
submenu_level="$1"
title="$2"
type="$3"
dataset="$4"
boot_device="$5"
initrd="$6"
kernel="$7"
kernel_version="$8"
kernel_additional_args="${9:-}"
boot_devices="${10:-}"
submenu_indentation="$(printf %${submenu_level}s | tr " " "${grub_tab}")"
echo "${submenu_indentation}menuentry '$(echo "${title}" | grub_quote)' ${CLASS} \${menuentry_id_option} 'gnulinux-${dataset}-${kernel_version}' {"
if [ "${quick_boot}" = 1 ]; then
echo "${submenu_indentation} recordfail"
fi
if [ "${type}" != "recovery" ] ; then
GRUB_SAVEDEFAULT=${GRUB_SAVEDEFAULT:-}
default_entry="$(save_default_entry)"
if [ -n "${default_entry}" ]; then
echo "${submenu_indentation} ${default_entry}"
fi
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "${GRUB_GFXPAYLOAD_LINUX}" = "" ]; then
echo "${submenu_indentation} load_video"
else
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "text" ]; then
echo "${submenu_indentation} load_video"
fi
fi
if ([ "${ubuntu_recovery}" = 0 ] || [ "${type}" != "recovery" ]) && \
([ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 1 ]); then
echo "${submenu_indentation} gfxmode \${linux_gfx_mode}"
fi
echo "${submenu_indentation} insmod gzio"
echo "${submenu_indentation} if [ \"\${grub_platform}\" = xen ]; then insmod xzio; insmod lzopio; fi"
if [ -n "$boot_devices" ]; then
for device in ${boot_devices}; do
echo "${submenu_indentation} if [ "${boot_device}" = "${device}" ]; then"
echo "$(prepare_grub_to_access_device_cached "${device}" $(( submenu_level +1 )) )"
echo "${submenu_indentation} fi"
done
else
echo "$(prepare_grub_to_access_device_cached "${boot_device}" "${submenu_level}")"
fi
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo $(gettext_printf "Loading Linux %s ..." ${kernel_version} | grub_quote)"
fi
linux_default_args="${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ ${type} = "recovery" ]; then
linux_default_args="${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
# echo in echo trims end of line spaces
echo "${submenu_indentation} linux \"${kernel}\" root=ZFS=\"${dataset}\" ro $(echo ${linux_default_args} ${kernel_additional_args})"
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo '$(gettext_printf "Loading initial ramdisk ..." | grub_quote)'"
fi
echo "${submenu_indentation} initrd \"${initrd}\""
echo "${submenu_indentation}}"
}
# Generate a GRUB Menu from menu meta data
# $1 menu metadata
generate_grub_menu() {
local menu_metadata="$1"
local last_section=""
local main_dataset_name=""
local main_dataset=""
local have_zsys=""
if [ -z "${menu_metadata}" ]; then
return
fi
CLASS="--class gnu-linux --class gnu --class os"
if [ "${GRUB_DISTRIBUTOR}" = "" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1 | LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "${ubuntu_recovery}" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} nomodeset"
fi
case "$GENKERNEL_ARCH" in
x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
esac
if [ "${vt_handoff}" = 1 ]; then
for word in ${GRUB_CMDLINE_LINUX_DEFAULT}; do
if [ "${word}" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_DEFAULT} \${vt_handoff}"
fi
done
fi
print_menu_prologue
cat<<'EOF'
function zsyshistorymenu {
# $1: root dataset (eg rpool/ROOT/ubuntu_2zhm07@autozsys_k56fr6)
# $2: boot device id (eg 411f29ce1557bfed)
# $3: initrd (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/initrd.img-5.4.0-21-generic)
# $4: kernel (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/vmlinuz-5.4.0-21-generic)
# $5: kernel_version (eg 5.4.0-21-generic)
set root_dataset="${1}"
set boot_device="${2}"
set initrd="${3}"
set kernel="${4}"
set kversion="${5}"
EOF
boot_devices=$(echo "${menu_metadata}" | cut -d"$(printf '\t')" -f6 | sort -u)
title=$(gettext_printf "Revert system only")
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data")"
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "Revert system only (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
fi
echo "}"
echo
# IFS is set to TAB (ASCII 0x09)
echo "${menu_metadata}" |
{
at_least_one_entry=0
have_zsys="$(which zsysd || true)"
while IFS="$(printf '\t')" read -r machineid iszsys section name dataset device initrd kernel opt; do
# Disable history for non zsys system or if systems is a zsys one and zsys isn't installed.
# In pure zfs systems, we identified multiple issues due to the mount generator
# in upstream zfs which makes it incompatible. Don't show history for now.
if [ "${section}" = "history" ]; then
if [ "${iszsys}" != "yes" ] || [ "${iszsys}" = "yes" -a -z "${have_zsys}" ]; then
continue
fi
fi
if [ "${last_section}" != "${section}" -a -n "${last_section}" ]; then
# Close previous section wrapper
if [ "${last_section}" != "main" ]; then
echo "}" # Add grub_tabs
at_least_one_entry=0
fi
fi
case "${section}" in
main)
title="${name}"
main_dataset_name="${name}"
main_dataset="${dataset}"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
zfs_linux_entry 0 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
at_least_one_entry=1
;;
advanced)
# normal and recovery entries for a given kernel
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "Advanced options for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-advanced-${main_dataset}' {"
fi
last_booted_kernel_marker=""
if [ "${opt}" = "true" ]; then
last_booted_kernel_marker="* "
fi
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
title="$(gettext_printf "%s%s, with Linux %s" "${last_booted_kernel_marker}" "${name}" "${kernel_version}")"
zfs_linux_entry 1 "${title}" "advanced" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY=${GRUB_DISABLE_RECOVERY:-}
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "%s%s, with Linux %s (%s)" "${last_booted_kernel_marker}" "${name}" "${kernel_version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
at_least_one_entry=1
;;
history)
# Revert to a snapshot
# revert system, revert system and user data and associated recovery entries
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "History for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-history-${main_dataset}' {"
fi
if [ "${iszsys}" = "yes" ]; then
title="$(gettext_printf "Revert to %s" "${name}" | grub_quote)"
else
title="$(gettext_printf "Boot on %s" "${name}" | grub_quote)"
fi
echo " submenu '${title}' \${menuentry_id_option} 'gnulinux-history-${dataset}' {"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
# Zsys only: let revert system without destroying snapshots
if [ "${iszsys}" = "yes" ]; then
echo "${grub_tab}${grub_tab}zsyshistorymenu" \"${dataset}\" \"${device}\" \"${initrd}\" \"${kernel}\" \"${kernel_version}\"
# Non-zsys: boot temporarly on snapshots or rollback (destroying intermediate snapshots)
else
title="$(gettext_printf "One time boot")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "One time boot (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 2 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
title="$(gettext_printf "Revert system (all intermediate snapshots will be destroyed)")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}" "rollback=yes"
fi
echo " }"
at_least_one_entry=1
;;
*)
grub_warn "unknown section: ${section}. Ignoring entry ${name} for ${dataset}"
;;
esac
last_section="${section}"
done
if [ "${at_least_one_entry}" -eq 1 ]; then
echo "}"
fi
}
}
# don't add trailing newline of variable is empty
# $1: content to write
# $2: destination file
trailing_newline_if_not_empty() {
content="$1"
dest="$2"
if [ -z "${content}" ]; then
rm -f "${dest}"
touch "${dest}"
return
fi
echo "${content}" > "${dest}"
}
GRUB_LINUX_ZFS_TEST="${GRUB_LINUX_ZFS_TEST:-}"
case "${GRUB_LINUX_ZFS_TEST}" in
bootlist)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
boot_list="$(bootlist ${MNTDIR})"
trailing_newline_if_not_empty "${boot_list}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
metamenu)
boot_list="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
trailing_newline_if_not_empty "${menu_metadata}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
grubmenu)
menu_metadata="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
grub_menu=$(generate_grub_menu "${menu_metadata}")
trailing_newline_if_not_empty "${grub_menu}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
*)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
# Generate the complete list of boot entries
boot_list="$(bootlist ${MNTDIR})"
# Create boot menu meta data from the list of boot entries
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
# Create boot menu meta data from the list of boot entries
grub_menu="$(generate_grub_menu "${menu_metadata}")"
if [ -n "${grub_menu}" ]; then
# We want the trailing newline as a marker will be added
echo "${grub_menu}"
fi
;;
esac
================= nvme0n1p4/etc/grub.d/44_linux_xen (filtered) =================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os --class xen"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
# Default to disabling partition uuid support to maintian compatibility with
# older kernels.
GRUB_DISABLE_LINUX_PARTUUID=${GRUB_DISABLE_LINUX_PARTUUID-true}
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if ( [ "x${GRUB_DEVICE_UUID}" = "x" ] && [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] ) \
|| ( [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
&& [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ] ) \
|| ( ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
&& ! test -e "/dev/disk/by-partuuid/${GRUB_DEVICE_PARTUUID}" ) \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
elif [ "x${GRUB_DEVICE_UUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ]; then
LINUX_ROOT_DEVICE=PARTUUID=${GRUB_DEVICE_PARTUUID}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
# Allow overriding GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT.
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE}" ]; then
GRUB_CMDLINE_LINUX="${GRUB_CMDLINE_LINUX_XEN_REPLACE}"
fi
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}"
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
linux_entry ()
{
linux_entry_xsm "$@" false
linux_entry_xsm "$@" true
}
linux_entry_xsm ()
{
os="$1"
version="$2"
xen_version="$3"
type="$4"
args="$5"
xen_args="$6"
xsm="$7"
# If user wants to enable XSM support, make sure there's
# corresponding policy file.
if ${xsm} ; then
xenpolicy="xenpolicy-$xen_version"
if test ! -e "${xen_dirname}/${xenpolicy}" ; then
return
fi
xen_args="$xen_args flask=enforcing"
xen_version="$(gettext_printf "%s (XSM enabled)" "$xen_version")"
# xen_version is used for messages only; actual file is xen_basename
fi
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
if [ x$type = xrecovery ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
elif [ "${type#init-}" != "$type" ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "${type#init-}")"
else
title="$(gettext_printf "%s, with Xen %s and Linux %s" "${os}" "${xen_version}" "${version}")"
fi
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
if [ x"Xen ${xen_version}>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
title="$(gettext_printf "%s, with Xen hypervisor" "${os}")"
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab | sed "s/^/$submenu_indentation/"
fi
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})"
lmessage="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$xmessage" | grub_quote)'
if [ "\$grub_platform" = "pc" -o "\$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
${xen_loader} ${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} \${xen_rm_opts}
echo '$(echo "$lmessage" | grub_quote)'
${module_loader} ${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}" ; then
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
message="$(gettext_printf "Loading initial ramdisk ...")"
initrd_path=
for i in ${initrd}; do
initrd_path="${rel_dirname}/${i}"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
${module_loader} --nounzip $(echo $initrd_path)
EOF
done
fi
if ${xsm} && test -n "${xenpolicy}" ; then
message="$(gettext_printf "Loading XSM policy ...")"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
${module_loader} ${rel_dirname}/${xenpolicy}
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
linux_list=
for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* /boot/kernel-*; do
if grub_file_is_not_garbage "$i"; then
basename=$(basename $i)
version=$(echo $basename | sed -e "s,^[^0-9]*-,,g")
dirname=$(dirname $i)
config=
for j in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${j}" ; then
config="${j}"
break
fi
done
if (grep -qx "CONFIG_XEN_DOM0=y" "${config}" 2> /dev/null || grep -qx "CONFIG_XEN_PRIVILEGED_GUEST=y" "${config}" 2> /dev/null); then linux_list="$linux_list $i" ; fi
fi
if [ "x${linux_list}" = "x" ] ; then
exit 0
fi
file_is_not_xen_garbage () {
case "$1" in
*/xen-syms-*)
return 1;;
*/xenpolicy-*)
return 1;;
*/*.config)
return 1;;
*)
return 0;;
esac
}
xen_list=
for i in /boot/xen*; do
if grub_file_is_not_garbage "$i" && file_is_not_xen_garbage "$i" ; then xen_list="$xen_list $i" ; fi
prepare_boot_cache=
boot_device_id=
title_correction_code=
machine=`uname -m`
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
while [ "x${xen_list}" != "x" ] ; do
list="${linux_list}"
current_xen=`version_find_latest $xen_list`
xen_basename=`basename ${current_xen}`
xen_dirname=`dirname ${current_xen}`
rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname`
xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"`
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ "x$is_top_level" != xtrue ]; then
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
fi
if ($grub_file --is-arm64-efi $current_xen); then
xen_loader="xen_hypervisor"
module_loader="xen_module"
else
if ($grub_file --is-x86-multiboot2 $current_xen); then
xen_loader="multiboot2"
module_loader="module2"
else
xen_loader="multiboot"
module_loader="module"
fi
fi
initrd_early=
for i in ${GRUB_EARLY_INITRD_LINUX_STOCK} \
${GRUB_EARLY_INITRD_LINUX_CUSTOM}; do
if test -e "${xen_dirname}/${i}" ; then
initrd_early="${initrd_early} ${i}"
fi
done
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd_real=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}" ; do
if test -e "${dirname}/${i}" ; then
initrd_real="$i"
break
fi
done
initrd=
if test -n "${initrd_early}" || test -n "${initrd_real}"; then
# Xen assumes the real initrd is the first module after the kernel.
# Additional (later) initrds can also be used for microcode update,
# with Xen option 'ucode=<scan|module number> (non-default anyway).
initrd="${initrd_real} ${initrd_early}"
initrd_display=
for i in ${initrd}; do
initrd_display="${initrd_display} ${dirname}/${i}"
done
gettext_printf "Found initrd image: %s\n" "$(echo $initrd_display)" >&2
fi
if test -z "${initrd_real}"; then
# "UUID=" magic is parsed by initrds. Since there's no initrd, it can't work here.
if [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ]; then
linux_root_device_thisversion=${GRUB_DEVICE}
else
linux_root_device_thisversion=PARTUUID=${GRUB_DEVICE_PARTUUID}
fi
fi
# The GRUB_DISABLE_SUBMENU option used to be different than others since it was
# mentioned in the documentation that has to be set to 'y' instead of 'true' to
# enable it. This caused a lot of confusion to users that set the option to 'y',
# 'yes' or 'true'. This was fixed but all of these values must be supported now.
if [ "x${GRUB_DISABLE_SUBMENU}" = xyes ] || [ "x${GRUB_DISABLE_SUBMENU}" = xy ]; then
GRUB_DISABLE_SUBMENU="true"
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xtrue ]; then
linux_entry "${OS}" "${version}" "${xen_version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
submenu_indentation="$grub_tab$grub_tab"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
is_top_level=false
fi
linux_entry "${OS}" "${version}" "${xen_version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
for supported_init in ${SUPPORTED_INITS}; do
init_path="${supported_init#*:}"
if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" "init-${supported_init%%:*}" \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
fi
done
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" recovery \
"single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}"
fi
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
if [ x"$is_top_level" != xtrue ]; then
echo ' }'
fi
xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '`
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
============== nvme0n1p4/etc/grub.d/45_os-prober_proxy (filtered) ==============
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/os-prober' | /etc/grub.d/bin/grubcfg_proxy "+*
+#text
-'Windows Boot Manager (on /dev/nvme0n1p1)'~d77e79e2f68ebd0f52c102e4530beeef~
"
=============== nvme0n1p4/etc/grub.d/46_custom_proxy (filtered) ================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/custom' | /etc/grub.d/bin/grubcfg_proxy "+*
+#text
-'Windows 11'~72c2acc2641d3f7878722b23dca15d5c~ as 'Windows Boot Manager (on /dev/nvme0n1p1)'
"
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to unsign) and reinstall the grub-efi of
nvme0n1p4,
using the following options: nvme0n1p1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 22.04.3 LTS entry (nvme0n1p1/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)Meilleurs voeux.
Et nous attendons le retour de malbo. 
Dernière modification par xubu1957 (Le 31/12/2023, à 10:54)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 31/12/2023, à 11:07
- hervax
Re : Ubuntu sur ACER Swift 5 (SF514-52T 56JV)
Merci ! Tu as été (bien) plus rapide que moi pour le récupérer ;-)
Acer Swift 5 Dual Boot Win11 - Ubuntu 24.04.1
Hors ligne