Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 27/08/2024, à 08:12

raconteur-troubadour

[Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

Bonjour

Suite à ma question avant installation instal,
j'observe des freezes que je décris dans ce message
Je n'ai pas de pistes pour l'instant, quelqu'un en aurait une ? merci

Dernière modification par raconteur-troubadour (Le 27/08/2024, à 11:02)

Hors ligne

#2 Le 27/08/2024, à 08:15

xubu1957

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

Bonjour,

Montre la RAM :

LANG=C free -wh
df -Thx tmpfs

la carte graphique :

lspci -vnn | grep -A 12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
uname -a

et :

echo $XDG_SESSION_TYPE

pour voir si c'est Wayland ou x11, en te servant du Retour utilisable de commande

Dernière modification par xubu1957 (Le 27/08/2024, à 08:16)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 27/08/2024, à 08:42

raconteur-troubadour

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

Merci de ton retour xubu, voila 

=== LANG=C free -wh
               total        used        free      shared     buffers       cache   available
Mem:           3.8Gi       963Mi       2.4Gi        36Mi        29Mi       709Mi       2.9Gi
Swap:          2.3Gi          0B       2.3Gi
===
=== df -Thx tpmfs
Filesystem     Type   Size  Used Avail Use% Mounted on
tmpfs          tmpfs  392M  1.7M  390M   1% /run
/dev/sda3      ext4    14G  7.9G  5.2G  61% /
tmpfs          tmpfs  2.0G     0  2.0G   0% /dev/shm
tmpfs          tmpfs  5.0M   12K  5.0M   1% /run/lock
tmpfs          tmpfs  392M  112K  392M   1% /run/user/1000
===
=== lspci -vnn | grep -A 12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV730 PRO [Radeon HD 4650] [1002:9498] (prog-if 00 [VGA controller])
	Kernel driver in use: radeon
	Kernel modules: radeon, amdgpu
===
=== uname -a
Linux fred-ixtreme-M3720 6.8.0-41-generic #41-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug  2 20:41:06 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux
===
=== set | grep XDG
XDG_CONFIG_DIRS=/etc/xdg/xdg-ubuntu:/etc/xdg
XDG_CURRENT_DESKTOP=ubuntu:GNOME
XDG_DATA_DIRS=/usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
XDG_MENU_PREFIX=gnome-
XDG_RUNTIME_DIR=/run/user/1000
XDG_SESSION_CLASS=user
XDG_SESSION_DESKTOP=ubuntu
XDG_SESSION_TYPE=wayland
    local -a dirs=(${BASH_COMPLETION_USER_DIR:-${XDG_DATA_HOME:-$HOME/.local/share}/bash-completion}/completions);
    for dir in ${XDG_DATA_DIRS:-/usr/local/share:/usr/share};
===

Dernière modification par raconteur-troubadour (Le 27/08/2024, à 09:05)

Hors ligne

#4 Le 27/08/2024, à 09:03

xubu1957

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

Pour ajouter toi-même les balises code à ton message #3 :    Merci      wink

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

moko138 a écrit :

1) Les balises-code sont les < > (crochets bleus) de la barre de mise en forme.

Balisesmoko138.jpg
_ _ _

3) /!\  Si vous avez plusieurs retours à donner, séparez-les bien (toujours pour la lisibilité) :

comme
cela.

        _ _ _

(edit=messages regroupés)
        _ _ _

Donne la liste des anomalies de démarrage :

journalctl --no-pager -b -p err

et :

ls -l /var/crash
dpkg -l | grep -v ^ii

> memento des balises code.

Dernière modification par xubu1957 (Le 27/08/2024, à 09:17)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 27/08/2024, à 09:14

raconteur-troubadour

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

=== journalctl --no-pager -b -p err
Aug 27 09:20:41 fred-ixtreme-M3720 gdm-password][1700]: gkr-pam: unable to locate daemon control file
Aug 27 09:20:44 fred-ixtreme-M3720 systemd[1715]: Failed to start app-gnome-gnome\x2dkeyring\x2dpkcs11-1956.scope - Appli
cation launched by gnome-session-binary.
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291496 op 0x1:(WRITE) flags 0x100000 ph
ys_seg 2 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786433, lost async page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786434, lost async page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x1:(WRITE) flags 0x800 phys_
seg 1 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786432, lost sync page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: ntfs3: sdh1: ino=3, ntfs_set_state failed, -5.
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6443768 op 0x1:(WRITE) flags 0x100000 ph
ys_seg 1 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 805467, lost async page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 91789992 op 0x1:(WRITE) flags 0x100000 p
hys_seg 1 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 11473745, lost async page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x1:(WRITE) flags 0x800 phys_
seg 1 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786432, lost sync page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: ntfs3: sdh1: ino=3, ntfs_set_state failed, -5.
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x0:(READ) flags 0x0 phys_seg
 1 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x1:(WRITE) flags 0x800 phys_
seg 1 prio class 0
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786432, lost sync page write
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: ntfs3: sdh1: ino=3, ntfs3_write_inode failed, -5.
Aug 27 09:30:21 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x0:(READ) flags 0x0 phys_seg
 1 prio class 0
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x1:(WRITE) flags 0x800 phys_
seg 1 prio class 0
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786432, lost sync page write
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: ntfs3: sdh1: ino=3, ntfs_set_state failed, -5.
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x1:(WRITE) flags 0x800 phys_
seg 1 prio class 0
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786432, lost sync page write
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: ntfs3: sdh1: ino=3, ntfs_set_state failed, -5.
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x0:(READ) flags 0x0 phys_seg
 1 prio class 0
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x1:(WRITE) flags 0x800 phys_
seg 1 prio class 0
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: Buffer I/O error on dev sdh1, logical block 786432, lost sync page write
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: ntfs3: sdh1: ino=3, ntfs3_write_inode failed, -5.
Aug 27 09:34:05 fred-ixtreme-M3720 kernel: device offline error, dev sdh, sector 6291488 op 0x0:(READ) flags 0x0 phys_seg
 1 prio class 0
=== 
=== ls -l /var/crash
total 0
===
=== dpkg -l | grep -v ^ii
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                          Version                                  Architecture Description
+++-=============================================-========================================-============-================================================================================
===

Hors ligne

#6 Le 27/08/2024, à 09:15

xubu1957

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

le 30/04/2023, geole a écrit :

...
Installe l'application smartmontools et publie l'état du disque.
https://doc.ubuntu-fr.org/smartmontools

sudo apt-get install --no-install-recommends smartmontools

et poste le retour de

sudo smartctl -s on -a  /dev/sdX

en remplaçant X par la bonne lettre.
...

Il faudra les spécialistes pour analyser.

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#7 Le 27/08/2024, à 09:47

raconteur-troubadour

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

en fait j'ai 2 disques, sda et sdb, je peux retirer le défaillant et reinstaller si besoin

=== sudo smartctl -s on -a /dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-41-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green
Device Model:     WDC WD10EADS-00M2B0
Serial Number:    WD-WCAV53217202
LU WWN Device Id: 5 0014ee 258daa422
Firmware Version: 01.00A01
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Tue Aug 27 10:36:18 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(21180) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 244) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   116   106   021    Pre-fail  Always       -       7158
  4 Start_Stop_Count        0x0032   086   086   000    Old_age   Always       -       14311
  5 Reallocated_Sector_Ct   0x0033   175   175   140    Pre-fail  Always       -       195
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       25429
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6595
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       105
193 Load_Cycle_Count        0x0032   165   165   000    Old_age   Always       -       107385
194 Temperature_Celsius     0x0022   101   092   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   041   041   000    Old_age   Always       -       159
197 Current_Pending_Sector  0x0032   200   198   000    Old_age   Always       -       30
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       3
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   171   000    Old_age   Offline      -       4

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      6150         -
# 2  Short offline       Completed without error       00%      6150         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

===
=== sudo smartctl -s on -a /dev/sdb
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-41-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000AAKX-603CA0
Serial Number:    WD-WCAYUHC70211
LU WWN Device Id: 5 0014ee 1af3b7bcf
Firmware Version: 18.01H18
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Aug 27 10:37:36 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 8700) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  88) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       367
  3 Spin_Up_Time            0x0027   142   139   021    Pre-fail  Always       -       3858
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5044
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   074   074   000    Old_age   Always       -       19294
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4976
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   001   000    Old_age   Always       -       798
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   054   047   040    Old_age   Always       -       46 (Min/Max 23/46)
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       66
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       4977
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       19
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       20
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       27

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

=== === more err
Aug sudo smartctl -s on -a /dev/sdbgdm-password][1700]: gkr-pam: unable to locate daemon control file

smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-41-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000AAKX-603CA0
Serial Number:    WD-WCAYUHC70211
LU WWN Device Id: 5 0014ee 1af3b7bcf
Firmware Version: 18.01H18
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Aug 27 10:38:03 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 8700) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  88) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       367
  3 Spin_Up_Time            0x0027   142   139   021    Pre-fail  Always       -       3858
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5044
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   074   074   000    Old_age   Always       -       19294
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4976
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   001   000    Old_age   Always       -       798
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   054   047   040    Old_age   Always       -       46 (Min/Max 23/46)
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       66
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       4977
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       19
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       20
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       27

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

===

Hors ligne

#8 Le 27/08/2024, à 09:58

raconteur-troubadour

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

J'ai un autre disque neuf wd blue de 500gb, si tu penses que ces freezes viennent d'erreur sur les 2 disques actuels (/ et /media) je peux faire une reinstall en ne mettant que le nouveau disque
Oui, on n'est pas sur du ssd ....
Je vais un peu maniper, je vais guetter le voyant disques quand j'ai un freeze, s'il y a corrélation, je ne mets que le nouveau disque
Merci de la piste en tout cas smile

Dernière modification par raconteur-troubadour (Le 27/08/2024, à 10:17)

Hors ligne

#9 Le 27/08/2024, à 10:58

raconteur-troubadour

Re : [Resolu] Installation OK aujourd'hui sur Packard-bell 2009 : freezes

Ca me revient ! Je n'ai pas utilisé ce pc depuis 3 ans, il a tenu 12 ans, fiable packard-bell smile
J'y ai changé pas mal de disques
J'avais rajouté un second disque pour ma dernière install du regretté win7, le 500gb je pense bien, et quand j'accédais au précédent, j'avais une latence, le voyant resté allumé 5-10 sec
Je vais enlever le 1gb et réinstall smile
Merci xubu, je n'y aurais pas pensé sans ta réaction sur les disques
Ce pc me sert de test, j'installerai bientôt ubuntu sur mon pc avec ssd

Hors ligne

Pages : 1