Pages : 1
#1 Le 14/12/2008, à 20:36
- Bebertii
[RESOLU]passage de 7.10 -> 8.10 = plus de wifi
Bonsoir,
Je vois que le topic est déjà bien garni, je viens y apporter ma petite pierre...
J'ai un portable hp nx6310, muni d'un chipset bcm43xx
Je l'ai fait fonctionner sous Mandriva, Elive 1.5, Backtrack, Puppy Linux, Feisty (7.04) puis Gusty (7.10) qui était sa dernière distrib ubuntu au moyen de ndiswrapper sans aucun problème.
Ayant décidé de passer un peu de temps ce week end, je me suis dit que j'allais faire la mise à jour vers Intrepid.
Donc formattage et réinstallation, sans problème
C'est à la première utilisation que j'ai eu la mauvaise surprise : ndiswrapper chargé, le témoin lumineux de ma carte ne s'allume pas, et mon réseau n'est pas détecté. Je tente wl, qui ne marche pas.
Première question : pourquoi ndiswrapper ne fonctionne plus ?
Deuxième question : pourquoi proposer wl alors qu'il ne prend pas en charge ma carte ?
En dernier espoir, je tente b43-fwcutter. Au redémarrage ô surprise, le témoin s'allume !
Ma carte apparait sous le doux nom de wlan0 !
L'applet réseau ne m'affiche pas mon réseau, je cherche network-admin.
Troisième question : pourquoi l'avoir viré, il marchait trop bien ?
Le nouveau gestionnaire network-manager-gnome ne me semble pas plus intuitif, j'installe wifi-radar, qui détecte ma carte, mais pas mon réseau....
Retour au point mort.
Dernière question : que dois-je faire pour pouvoir utiliser ma carte wifi sous Intrepid ?
Par avance, merci
[EDIT]
J'installe Hardy Heron pour voir si la LTS est plus fonctionnelle, mais je pense que je vais avoir les mêmes problèmes.
Je posterai les résultats de :
cat /etc/lsb-release
lsusb
lspci
sudo lshw -C network
lsmod
iwconfig
ifconfig
sudo iwlist scanuname -r -m
cat /etc/network/interfaces
nm-tool
quand l'install sera finie
[/EDIT]
Dernière modification par Bebertii (Le 15/12/2008, à 18:28)
Hors ligne
#2 Le 14/12/2008, à 23:09
- Bebertii
Re : [RESOLU]passage de 7.10 -> 8.10 = plus de wifi
Alors, après une installation de Hardy, j'ai exactement le même problème :
wl ne fonctionne pas, fwcutter allume le témoin, mais ne détecte rien et ndiswrapper ne fonctionne plus.
J'affiche donc ce qui est demandé :
bebert@bebert-laptop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu 8.04.1"
bebert@bebert-laptop:~$ lsusb
Bus 005 Device 002: ID 090c:1000 Feiya Technology Corp. Memory Bar
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
bebert@bebert-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
08:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
bebert@bebert-laptop:~$ sudo lshw -C network
*-network
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:08:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=b43-pci-bridge latency=0 module=ssb
*-network
description: Ethernet interface
product: BCM4401-B0 100Base-TX
vendor: Broadcom Corporation
physical id: e
bus info: pci@0000:02:0e.0
logical name: eth0
version: 02
serial: 00:15:60:c5:74:44
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.0.13 latency=64 link=yes module=ssb multicast=yes port=twisted pair speed=100MB/s
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:14:a5:aa:6e:ef
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g
bebert@bebert-laptop:~$ lsmod
Module Size Used by
ipv6 267780 10
af_packet 23812 2
i915 32512 2
drm 82452 3 i915
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
rfkill_input 5760 0
ppdev 10372 0
acpi_cpufreq 10796 2
cpufreq_stats 7104 0
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9740 1
freq_table 5536 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 5284 0
sbs 15112 0
sbshc 7680 1 sbs
dock 11280 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
nls_iso8859_1 4992 1
nls_cp437 6656 1
vfat 14464 1
fat 54556 1 vfat
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
joydev 13120 0
pcmcia 40876 0
arc4 2944 2
ecb 4480 2
blkcipher 8324 1 ecb
b43 144548 0
rfkill 8596 3 rfkill_input,b43
snd_hda_intel 344856 3
mac80211 165652 1 b43
snd_pcm_oss 42144 0
cfg80211 15112 1 mac80211
snd_mixer_oss 17920 1 snd_pcm_oss
led_class 6020 1 b43
input_polldev 5896 1 b43
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
container 5632 0
snd_seq_dummy 4868 0
video 19856 0
output 4736 1 video
serio_raw 7940 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
psmouse 40336 0
ndiswrapper 192920 0
yenta_socket 27276 1
rsrc_nonstatic 13696 1 yenta_socket
pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
wmi_acer 9644 0
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
battery 14212 0
ac 6916 0
button 9232 0
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
evdev 13056 7
snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp 25492 1
pcspkr 4224 0
agpgart 34760 3 drm,intel_agp
shpchp 34452 0
pci_hotplug 30880 1 shpchp
soundcore 8800 1 snd
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
ext3 136840 2
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
pata_acpi 8320 0
sd_mod 30720 6
ata_generic 8324 0
ohci1394 33584 0
ieee1394 93752 2 sbp2,ohci1394
ehci_hcd 37900 0
ahci 28548 5
b44 28432 0
mii 6400 1 b44
ata_piix 19588 0
libata 159344 4 pata_acpi,ata_generic,ahci,ata_piix
scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata
uhci_hcd 27024 0
usbcore 146412 4 ndiswrapper,ehci_hcd,uhci_hcd
ssb 34308 2 b43,b44
thermal 16796 0
processor 37384 4 acpi_cpufreq,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 5
bebert@bebert-laptop:~$ iwconfig
lo no wireless extensions.eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
bebert@bebert-laptop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:60:c5:74:44
inet adr:192.168.0.13 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::215:60ff:fec5:7444/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:9 erreurs:0 :0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:1262 (1.2 KB) Octets transmis:6975 (6.8 KB)
Interruption:16lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:1374 erreurs:0 :0 overruns:0 frame:0
TX packets:1374 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:68700 (67.0 KB) Octets transmis:68700 (67.0 KB)wlan0 Link encap:Ethernet HWaddr 00:14:a5:aa:6e:ef
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)wmaster0 Link encap:UNSPEC HWaddr 00-14-A5-AA-6E-EF-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
bebert@bebert-laptop:~$ sudo iwlist scan
lo Interface doesn't support scanning.eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 No scan results
bebert@bebert-laptop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
bebert@bebert-laptop:~$ nm-tool
NetworkManager ToolState: connected
- Device: eth0 ----------------------------------------------------------------
NM Path: /org/freedesktop/NetworkManager/Devices/eth0
Type: Wired
Driver:
Active: yes
HW Address: 00:15:60:C5:74:44Capabilities:
Supported: yes
Carrier Detect: yes
Speed: 100 Mb/sWired Settings
Hardware Link: yesIP Settings:
IP Address: 192.168.0.13
Subnet Mask: 255.255.255.0
Broadcast: 192.168.0.255
Gateway: 192.168.0.254
Primary DNS: 212.27.40.241
Secondary DNS: 212.27.40.240- Device: wlan0 ----------------------------------------------------------------
NM Path: /org/freedesktop/NetworkManager/Devices/wlan0
Type: 802.11 Wireless
Driver:
Active: no
HW Address: 00:14:A5:AA:6E:EFCapabilities:
Supported: yesWireless Settings
Scanning: yes
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yesWireless Networks (* = Current Network)
Dernière modification par Bebertii (Le 14/12/2008, à 23:34)
Hors ligne
#3 Le 15/12/2008, à 18:27
- Bebertii
Re : [RESOLU]passage de 7.10 -> 8.10 = plus de wifi
Résolu,
J'utilise professionnellement ce portable, il m'est maintenant nécessaire qu'il fonctionne tout de suite. Je suis passé à XP.
Hors ligne
#4 Le 15/12/2008, à 18:49
- 1 6 & RAT{} R
Re : [RESOLU]passage de 7.10 -> 8.10 = plus de wifi
ok, bah tant pis
sinon, si tu cherches à le faire marcher quand meme, effectue une recherche avec
08:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
BCM4311 dans n'importe quel moteur de recherche
Dernière modification par 1 6 & RAT{} R (Le 15/12/2008, à 18:51)
#5 Le 17/12/2008, à 09:11
- Bebertii
Re : [RESOLU]passage de 7.10 -> 8.10 = plus de wifi
Merci de ta réponse
Ce sont des pages que je connais. J'ai fait fonctionner le wifi sans problème avec 7.10 (dont il est vraisemblablement question dans le lien que tu m'as donné puisque le module bcm43xx n'existe plus à partir de 8.04)
Le problème, c'est que même si ndiswrapper se charge dans 8.04 et 8.10, il n'est pas fonctionnel. fwcutter semble marchouiller de façon bizarre, mais ce n'est pas concluant.
Je garde donc Linux sur mon pc de bureau pour m'amuser à mes moment perdus ou faire des trucs vraiment impossible sous XP, mais mon portabl est repassé sous Windows (+ une petite partoche Backtrack au cas où...)
Hors ligne
Pages : 1