Ubuntu-fr

didifred

accès repertoire partagé linux sur un reseau local

bonjour
j'ai  3 PC en reseau local.
2 PC sous Xp (A et B) et un PC sous Ubuntu(C).
Sur C  j'ai une partition nommé /commun que je voudrais partager avec A et B.
Les 3 PC se voient sur le voisinage reseau, que ce soit sous Xp ou Ubuntu.
Sur A , l'utilisateur est Thomas
Sur B, l'utilisateur est Fred
Sur C, l'utilisateur est Sarah

Pourquoi ni A,ni B ne peuvent ecrire sur /commun sur C?
Pourquoi C ne peut pas copier un fichier provenant de A ou B sur C?

Quelle serait les bonnes commandes pour partager ce repertoire tel que je le souhaite?

merci
A+

Gillaume

Re : accès repertoire partagé linux sur un reseau local

didifred, tu as installé et configurer samba sur C ??
si oui, donne ton smb.conf....

et tu as fait une recherche sur le forum + wiki ?
gui

---

Guili Guili

didifred

Re : accès repertoire partagé linux sur un reseau local

voilà mon smb.conf :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = maison

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
   security = share

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam guest

   obey pam restrictions = yes

   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin

######## File sharing ########

# Name mangling options
;   preserve case = yes
;   short preserve case = yes

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

#======================= Share Definitions =======================

wins support = no
[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

[printers]
   comment = All Printers
   browseable = no
   path = /tmp
   printable = yes
   public = no
   writable = no
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[commun]
path = /commun
available = yes
browseable = yes
public = yes
writable = yes
guest ok = yes
create mask = 0777
directory mask = 0777
;force user = nobody
;force group = nogroup
;user = thomas,sarah,fred

où est l'erreur?

Gillaume

Re : accès repertoire partagé linux sur un reseau local

#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

je ne le mettrais pas en commantaire : enleve le #

mets security = user

1. pourquoi tu mets sur le partage [home] ?
writable=no

2. as tu rentré les users des postes A et B, avec
sudo smbpassd -a userA ?

3. quels sont les perm du dossier commun

il doit appartenir a root:root.
donc si tu veux que des users autre que root puisse y ecrire
tu dois au moins faire un
sudo chmod o+w /commun

Moi, je fais une sauvegarde du smb.conf, et je vire les commentaire en faisant
sudo cp /etc/samba/smb.conf  /etc/samba/smb.conf.bak
testparm /etc/samba/smb.conf > /etc/samba/smb.conf

A+
gui

---

Guili Guili

didifred

Re : accès repertoire partagé linux sur un reseau local

le repertoire /commun n'est pas un sous repertoire de /home .
Il est le seul repertoire de la partition Fat32 que j'ai fait!

Est-il necessaire de déclarer les utilisateurs potentiels A et B dans le C ?en sachant que jamais A ni B ne vont se servir de C sous linux, mais seulement partager le reprtoire /commun qui se trouve sur C au travers du reseau local et ceci à partir de leur PC sous XP !

comment faire pour verifier et mettre le proprietaire root:root sur/commun?

merci
A+

Gillaume

Re : accès repertoire partagé linux sur un reseau local

bien sur que tu dois faire connaitre à C, les deux users de A et B !!!
Comment veux tu que samba les laisse passer, si ils sont inconnu pour le systeme de C ??????

tu dois les ajouter sur le systeme linux
adduser user A et B
et smbpasswd -a userA et B

avec pour smbpassd, le meme mot de passe que sur tes machines A et B.

ta partoche en fat 32, est montée au démarrage, avec le fichier /etc/fstab.
je connais bien la syntaxe, j'espere ne pas dire de bétises

mets un truc comme ça, du moins, verifie et modifie ....

/dev/hdaX    /commun     vfat    rw,user,auto    0    0

hdaX : le X a une valeur pour toi !

---

Guili Guili