#26 Le 01/06/2009, à 16:29
- El Pensador
Re : Problème Connexion Wifi Ubuntu 9.04
Bonjour,
Essayes çà :
Dans Système>Administration>Pilotes de périphériques => tu désactives le pilote puis tu le réactives. Ensuite tu rebootes et donnes le retour de ces commandes:
lsmod
sudo lshw -C network
iwconfig
sudo iwlist scan
dmesgLa dernière commande est importante car elle va donner les éventuelles erreurs
« À quoi je sers ? Sans doute à rien du tout... »
A Tunisian Girl
Hors ligne
#27 Le 01/06/2009, à 17:30
- Pitox
Re : Problème Connexion Wifi Ubuntu 9.04
Hum comment je pourrais désactiver le pilote puisqu'il me dit qu' "aucun pilote propriétaire n'est utilisé sur ce système" ?
#28 Le 01/06/2009, à 18:00
- El Pensador
Re : Problème Connexion Wifi Ubuntu 9.04
OK, bon j'ai peut-être un début de pistes sachant que beaucoup de personnes ont des problèmes avec les broadcom depuis le passage à jaunty... 
Peux-tu donner le retour des commandes de mon post précédent.
« À quoi je sers ? Sans doute à rien du tout... »
A Tunisian Girl
Hors ligne
#29 Le 01/06/2009, à 18:32
- Pitox
Re : Problème Connexion Wifi Ubuntu 9.04
paul@paul-laptop:~$ lsmod
Module Size Used by
nls_iso8859_1 12032 1
nls_cp437 13696 1
isofs 39844 1
vfat 18816 1
fat 58272 1 vfat
udf 87716 0
crc_itu_t 10112 1 udf
rfkill_input 12800 0
i915 65540 2
drm 96296 3 i915
binfmt_misc 16776 1
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
lp 17156 0
snd_intel8x0 37532 3
snd_ac97_codec 112292 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
arc4 9856 2
ecb 10752 2
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
joydev 18368 0
b43 131484 0
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcmcia 44748 0
mac80211 217208 1 b43
ppdev 15620 0
snd 62628 16 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
dcdbas 15264 0
cfg80211 38032 1 mac80211
yenta_socket 32396 1
rsrc_nonstatic 19328 1 yenta_socket
pcmcia_core 43540 3 pcmcia,yenta_socket,rsrc_nonstatic
psmouse 61972 0
soundcore 15200 1 snd
led_class 12036 1 b43
serio_raw 13316 0
pcspkr 10496 0
iTCO_wdt 19108 0
snd_page_alloc 16904 2 snd_intel8x0,snd_pcm
input_polldev 11912 1 b43
iTCO_vendor_support 11652 1 iTCO_wdt
shpchp 40212 0
intel_agp 34108 1
agpgart 42696 3 drm,intel_agp
video 25360 0
output 11008 1 video
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
ohci1394 38576 0
e100 41740 0
mii 13312 1 e100
ssb 41220 1 b43
ieee1394 94660 1 ohci1394
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
usb_storage 82880 1paul@paul-laptop:~$ sudo lshw -C network
[sudo] password for paul:
*-network:0
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:01:03.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=32 module=ssb
*-network:1
description: Ethernet interface
product: 82801DB PRO/100 VE (MOB) Ethernet Controller
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:01:08.0
logical name: eth0
version: 81
serial: 00:0f:1f:bc:4b:32
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.23-k6-NAPI duplex=half firmware=N/A latency=32 link=no maxlatency=56 mingnt=8 module=e100 multicast=yes port=MII speed=10MB/s
*-network:0
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:90:96:f2:48:87
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
*-network:1 DISABLED
description: Ethernet interface
physical id: 2
logical name: pan0
serial: 82:bd:27:55:52:18
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yespaul@paul-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
pan0 no wireless extensions.paul@paul-laptop:~$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 No scan results
pan0 Interface doesn't support scanning.[ 3.271012] system 00:0d: ioport range 0xfc0-0xfdf has been reserved
[ 3.271037] system 00:0d: ioport range 0x13b0-0x13bb has been reserved
[ 3.271062] system 00:0d: ioport range 0x13c0-0x13df has been reserved
[ 3.271071] system 00:0d: ioport range 0x17b0-0x17bb has been reserved
[ 3.271096] system 00:0d: ioport range 0x17c0-0x17df has been reserved
[ 3.271104] system 00:0d: ioport range 0x1bb0-0x1bbb has been reserved
[ 3.271129] system 00:0d: ioport range 0x1bc0-0x1bdf has been reserved
[ 3.271138] system 00:0d: ioport range 0x1fb0-0x1fbb has been reserved
[ 3.271163] system 00:0d: ioport range 0x1fc0-0x1fdf has been reserved
[ 3.271188] system 00:0d: ioport range 0x23b0-0x23bb has been reserved
[ 3.271197] system 00:0d: ioport range 0x23c0-0x23df has been reserved
[ 3.271222] system 00:0d: ioport range 0x27b0-0x27bb has been reserved
[ 3.271231] system 00:0d: ioport range 0x27c0-0x27df has been reserved
[ 3.271256] system 00:0d: ioport range 0x2bb0-0x2bbb has been reserved
[ 3.271282] system 00:0d: ioport range 0x2bc0-0x2bdf has been reserved
[ 3.271290] system 00:0d: ioport range 0x2fb0-0x2fbb has been reserved
[ 3.271316] system 00:0d: ioport range 0x2fc0-0x2fdf has been reserved
[ 3.271324] system 00:0d: ioport range 0x33b0-0x33bb has been reserved
[ 3.271350] system 00:0d: ioport range 0x33c0-0x33df has been reserved
[ 3.271375] system 00:0d: ioport range 0x37b0-0x37bb has been reserved
[ 3.271384] system 00:0d: ioport range 0x37c0-0x37df has been reserved
[ 3.271410] system 00:0d: ioport range 0x3bb0-0x3bbb has been reserved
[ 3.271419] system 00:0d: ioport range 0x3bc0-0x3bdf has been reserved
[ 3.271444] system 00:0d: ioport range 0x3fb0-0x3fbb has been reserved
[ 3.271470] system 00:0d: ioport range 0x3fc0-0x3fdf has been reserved
[ 3.271479] system 00:0d: ioport range 0x43b0-0x43bb has been reserved
[ 3.271505] system 00:0d: ioport range 0x43c0-0x43df has been reserved
[ 3.271514] system 00:0d: ioport range 0x47b0-0x47bb has been reserved
[ 3.271539] system 00:0d: ioport range 0x47c0-0x47df has been reserved
[ 3.271565] system 00:0d: ioport range 0x4bb0-0x4bbb has been reserved
[ 3.271604] system 00:0d: ioport range 0x4bc0-0x4bdf has been reserved
[ 3.271629] system 00:0d: ioport range 0x4fb0-0x4fbb has been reserved
[ 3.271639] system 00:0d: ioport range 0x4fc0-0x4fdf has been reserved
[ 3.271664] system 00:0d: ioport range 0x53b0-0x53bb has been reserved
[ 3.271690] system 00:0d: ioport range 0x53c0-0x53df has been reserved
[ 3.271699] system 00:0d: ioport range 0x57b0-0x57bb has been reserved
[ 3.271725] system 00:0d: ioport range 0x57c0-0x57df has been reserved
[ 3.271751] system 00:0d: ioport range 0x5bb0-0x5bbb has been reserved
[ 3.271760] system 00:0d: ioport range 0x5bc0-0x5bdf has been reserved
[ 3.271786] system 00:0d: ioport range 0x5fb0-0x5fbb has been reserved
[ 3.271795] system 00:0d: ioport range 0x5fc0-0x5fdf has been reserved
[ 3.271822] system 00:0d: ioport range 0x63b0-0x63bb has been reserved
[ 3.271847] system 00:0d: ioport range 0x63c0-0x63df has been reserved
[ 3.271857] system 00:0d: ioport range 0x67b0-0x67bb has been reserved
[ 3.271883] system 00:0d: ioport range 0x67c0-0x67df has been reserved
[ 3.271909] system 00:0d: ioport range 0x6bb0-0x6bbb has been reserved
[ 3.271918] system 00:0d: ioport range 0x6bc0-0x6bdf has been reserved
[ 3.271944] system 00:0d: ioport range 0x6fb0-0x6fbb has been reserved
[ 3.271971] system 00:0d: ioport range 0x6fc0-0x6fdf has been reserved
[ 3.271980] system 00:0d: ioport range 0x73b0-0x73bb has been reserved
[ 3.272006] system 00:0d: ioport range 0x73c0-0x73df has been reserved
[ 3.272046] system 00:0d: ioport range 0x77b0-0x77bb has been reserved
[ 3.272073] system 00:0d: ioport range 0x77c0-0x77df has been reserved
[ 3.272099] system 00:0d: ioport range 0x7bb0-0x7bbb has been reserved
[ 3.272109] system 00:0d: ioport range 0x7bc0-0x7bdf has been reserved
[ 3.272135] system 00:0d: ioport range 0x7fb0-0x7fbb has been reserved
[ 3.272161] system 00:0d: ioport range 0x7fc0-0x7fdf has been reserved
[ 3.272171] system 00:0d: ioport range 0x83b0-0x83bb has been reserved
[ 3.272197] system 00:0d: ioport range 0x83c0-0x83df has been reserved
[ 3.272224] system 00:0d: ioport range 0x87b0-0x87bb has been reserved
[ 3.272233] system 00:0d: ioport range 0x87c0-0x87df has been reserved
[ 3.272260] system 00:0d: ioport range 0x8bb0-0x8bbb has been reserved
[ 3.272286] system 00:0d: ioport range 0x8bc0-0x8bdf has been reserved
[ 3.272296] system 00:0d: ioport range 0x8fb0-0x8fbb has been reserved
[ 3.272322] system 00:0d: ioport range 0x8fc0-0x8fdf has been reserved
[ 3.272349] system 00:0d: ioport range 0x93b0-0x93bb has been reserved
[ 3.272359] system 00:0d: ioport range 0x93c0-0x93df has been reserved
[ 3.272385] system 00:0d: ioport range 0x97b0-0x97bb has been reserved
[ 3.272412] system 00:0d: ioport range 0x97c0-0x97df has been reserved
[ 3.272422] system 00:0d: ioport range 0x9bb0-0x9bbb has been reserved
[ 3.272448] system 00:0d: ioport range 0x9bc0-0x9bdf has been reserved
[ 3.272475] system 00:0d: ioport range 0x9fb0-0x9fbb has been reserved
[ 3.272485] system 00:0d: ioport range 0x9fc0-0x9fdf has been reserved
[ 3.272512] system 00:0d: ioport range 0xa3b0-0xa3bb has been reserved
[ 3.272538] system 00:0d: ioport range 0xa3c0-0xa3df has been reserved
[ 3.272548] system 00:0d: ioport range 0xa7b0-0xa7bb has been reserved
[ 3.272575] system 00:0d: ioport range 0xa7c0-0xa7df has been reserved
[ 3.272602] system 00:0d: ioport range 0xabb0-0xabbb has been reserved
[ 3.272629] system 00:0d: ioport range 0xabc0-0xabdf has been reserved
[ 3.272639] system 00:0d: ioport range 0xafb0-0xafbb has been reserved
[ 3.272666] system 00:0d: ioport range 0xafc0-0xafdf has been reserved
[ 3.272692] system 00:0d: ioport range 0xb3b0-0xb3bb has been reserved
[ 3.272703] system 00:0d: ioport range 0xb3c0-0xb3df has been reserved
[ 3.272730] system 00:0d: ioport range 0xb7b0-0xb7bb has been reserved
[ 3.272757] system 00:0d: ioport range 0xb7c0-0xb7df has been reserved
[ 3.272767] system 00:0d: ioport range 0xbbb0-0xbbbb has been reserved
[ 3.272794] system 00:0d: ioport range 0xbbc0-0xbbdf has been reserved
[ 3.272822] system 00:0d: ioport range 0xbfb0-0xbfbb has been reserved
[ 3.272849] system 00:0d: ioport range 0xbfc0-0xbfdf has been reserved
[ 3.272859] system 00:0d: ioport range 0xc3b0-0xc3bb has been reserved
[ 3.272886] system 00:0d: ioport range 0xc3c0-0xc3df has been reserved
[ 3.272914] system 00:0d: ioport range 0xc7b0-0xc7bb has been reserved
[ 3.272924] system 00:0d: ioport range 0xc7c0-0xc7df has been reserved
[ 3.272952] system 00:0d: ioport range 0xcbb0-0xcbbb has been reserved
[ 3.272979] system 00:0d: ioport range 0xcbc0-0xcbdf has been reserved
[ 3.273006] system 00:0d: ioport range 0xcfb0-0xcfbb has been reserved
[ 3.273017] system 00:0d: ioport range 0xcfc0-0xcfdf has been reserved
[ 3.273079] system 00:0d: ioport range 0xd3b0-0xd3bb has been reserved
[ 3.273106] system 00:0d: ioport range 0xd3c0-0xd3df has been reserved
[ 3.273134] system 00:0d: ioport range 0xd7b0-0xd7bb has been reserved
[ 3.273161] system 00:0d: ioport range 0xd7c0-0xd7df has been reserved
[ 3.273172] system 00:0d: ioport range 0xdbb0-0xdbbb has been reserved
[ 3.273199] system 00:0d: ioport range 0xdbc0-0xdbdf has been reserved
[ 3.273227] system 00:0d: ioport range 0xdfb0-0xdfbb has been reserved
[ 3.273237] system 00:0d: ioport range 0xdfc0-0xdfdf has been reserved
[ 3.273296] system 00:0d: ioport range 0xf3b0-0xf3bb has been reserved
[ 3.273323] system 00:0d: ioport range 0xf3c0-0xf3df has been reserved
[ 3.273351] system 00:0d: ioport range 0xf7b0-0xf7bb has been reserved
[ 3.273362] system 00:0d: ioport range 0xf7c0-0xf7df has been reserved
[ 3.273390] system 00:0d: ioport range 0xfbb0-0xfbbb has been reserved
[ 3.273418] system 00:0d: ioport range 0xfbc0-0xfbdf has been reserved
[ 3.273445] system 00:0d: ioport range 0xffb0-0xffbb has been reserved
[ 3.273456] system 00:0d: ioport range 0xffc0-0xffdf has been reserved
[ 3.309245] pci 0000:01:01.0: CardBus bridge, secondary bus 0000:02
[ 3.309270] pci 0000:01:01.0: IO window: 0x00e000-0x00e0ff
[ 3.309280] pci 0000:01:01.0: IO window: 0x00e400-0x00e4ff
[ 3.309306] pci 0000:01:01.0: PREFETCH window: 0x30000000-0x33ffffff
[ 3.309333] pci 0000:01:01.0: MEM window: 0x38000000-0x3bffffff
[ 3.309343] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 3.309368] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 3.309396] pci 0000:00:1e.0: MEM window: 0xfc000000-0xfdffffff
[ 3.309406] pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x00000033ffffff
[ 3.309463] pci 0000:00:1e.0: setting latency timer to 64
[ 3.309494] pci 0000:01:01.0: enabling device (0000 -> 0003)
[ 3.310471] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 3.310496] PCI: setting IRQ 11 as level-triggered
[ 3.310523] pci 0000:01:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.310554] bus: 00 index 0 io port: [0x00-0xffff]
[ 3.310562] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 3.310586] bus: 01 index 0 io port: [0xe000-0xefff]
[ 3.310593] bus: 01 index 1 mmio: [0xfc000000-0xfdffffff]
[ 3.310616] bus: 01 index 2 mmio: [0x30000000-0x33ffffff]
[ 3.310623] bus: 01 index 3 io port: [0x00-0xffff]
[ 3.310630] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 3.310654] bus: 02 index 0 io port: [0xe000-0xe0ff]
[ 3.310660] bus: 02 index 1 io port: [0xe400-0xe4ff]
[ 3.310684] bus: 02 index 2 mmio: [0x30000000-0x33ffffff]
[ 3.310691] bus: 02 index 3 mmio: [0x38000000-0x3bffffff]
[ 3.310747] NET: Registered protocol family 2
[ 3.311445] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 3.313035] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 3.313380] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 3.313701] TCP: Hash tables configured (established 16384 bind 16384)
[ 3.313725] TCP reno registered
[ 3.314108] NET: Registered protocol family 1
[ 3.314768] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 5.381031] it is
[ 7.576337] Freeing initrd memory: 7369k freed
[ 7.576597] cpufreq: No nForce2 chipset.
[ 7.577276] audit: initializing netlink socket (disabled)
[ 7.577381] type=2000 audit(1243880584.576:1): initialized
[ 7.629755] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 7.639371] VFS: Disk quotas dquot_6.5.1
[ 7.639778] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.644894] fuse init (API version 7.10)
[ 7.645485] msgmni has been set to 991
[ 7.646529] alg: No test for stdrng (krng)
[ 7.646614] io scheduler noop registered
[ 7.646620] io scheduler anticipatory registered
[ 7.646643] io scheduler deadline registered
[ 7.646767] io scheduler cfq registered (default)
[ 7.646838] pci 0000:00:02.0: Boot video device
[ 7.647142] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 7.704626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.704688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 7.705975] ACPI: AC Adapter [AC] (on-line)
[ 7.706375] ACPI: Battery Slot [BAT0] (battery absent)
[ 7.706627] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.707067] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 7.708079] ACPI: Lid Switch [LID]
[ 7.708367] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.708394] ACPI: Power Button (CM) [PBTN]
[ 7.708673] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 7.708681] ACPI: Sleep Button (CM) [SBTN]
[ 7.711350] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 7.711487] processor ACPI_CPU:00: registered as cooling_device0
[ 7.711515] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 7.760174] thermal LNXTHERM:01: registered as thermal_zone0
[ 7.771178] ACPI: Thermal Zone [THM] (36 C)
[ 7.771439] isapnp: Scanning for PnP cards...
[ 8.134196] isapnp: No Plug & Play device found
[ 8.141630] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 8.141883] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.144146] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.145679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 8.145704] PCI: setting IRQ 5 as level-triggered
[ 8.145714] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 8.145745] serial 0000:00:1f.6: PCI INT B disabled
[ 8.149918] brd: module loaded
[ 8.151831] loop: module loaded
[ 8.152325] Fixed MDIO Bus: probed
[ 8.152359] PPP generic driver version 2.4.2
[ 8.152734] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 8.152916] Driver 'sd' needs updating - please use bus_type methods
[ 8.152960] Driver 'sr' needs updating - please use bus_type methods
[ 8.153367] ata_piix 0000:00:1f.1: version 2.12
[ 8.153397] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 8.153427] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 8.153608] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 8.153923] scsi0 : ata_piix
[ 8.154400] scsi1 : ata_piix
[ 8.157449] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 8.157474] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 8.320962] ata1.00: ATA-6: ST93012A, 4.07, max UDMA/100
[ 8.320970] ata1.00: 58605120 sectors, multi 8: LBA48
[ 8.336951] ata1.00: configured for UDMA/100
[ 8.500679] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW242U, UD25, max UDMA/33
[ 8.508980] ata2.00: configured for UDMA/33
[ 8.510753] scsi 0:0:0:0: Direct-Access ATA ST93012A 4.07 PQ: 0 ANSI: 5
[ 8.511317] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors: (30.0 GB/27.9 GiB)
[ 8.511412] sd 0:0:0:0: [sda] Write Protect is off
[ 8.511437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.511593] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.511939] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors: (30.0 GB/27.9 GiB)
[ 8.512069] sd 0:0:0:0: [sda] Write Protect is off
[ 8.512093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.512249] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.512277] sda: sda1 sda2 < sda5 >
[ 8.550531] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.550804] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.551970] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW242U UD25 PQ: 0 ANSI: 5
[ 8.554324] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 8.554349] Uniform CD-ROM driver Revision: 3.20
[ 8.554879] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.555100] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.558993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.560151] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 8.560179] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 8.560271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8.560280] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.560646] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 8.564691] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.564703] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 8.564756] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfaeffc00
[ 8.580102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.580547] usb usb1: configuration #1 chosen from 1 choice
[ 8.580729] hub 1-0:1.0: USB hub found
[ 8.580765] hub 1-0:1.0: 6 ports detected
[ 8.581359] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.581456] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.581610] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 8.581644] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.581652] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.581922] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.581987] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 8.582435] usb usb2: configuration #1 chosen from 1 choice
[ 8.582592] hub 2-0:1.0: USB hub found
[ 8.582643] hub 2-0:1.0: 2 ports detected
[ 8.584145] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 8.584156] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 8.584188] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.584213] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.584492] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 8.584558] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 8.585025] usb usb3: configuration #1 chosen from 1 choice
[ 8.585190] hub 3-0:1.0: USB hub found
[ 8.585224] hub 3-0:1.0: 2 ports detected
[ 8.586633] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 8.586660] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 8.586693] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.586718] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.586972] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 8.587038] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 8.587532] usb usb4: configuration #1 chosen from 1 choice
[ 8.587690] hub 4-0:1.0: USB hub found
[ 8.587724] hub 4-0:1.0: 2 ports detected
[ 8.588476] usbcore: registered new interface driver libusual
[ 8.588661] usbcore: registered new interface driver usbserial
[ 8.588724] USB Serial support registered for generic
[ 8.588799] usbcore: registered new interface driver usbserial_generic
[ 8.588822] usbserial: USB Serial Driver core
[ 8.589112] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.600146] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.600176] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.600791] mice: PS/2 mouse device common for all mice
[ 8.601934] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 8.601994] rtc0: alarms up to one day, 114 bytes nvram
[ 8.602430] device-mapper: uevent: version 1.0.3
[ 8.603035] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 8.603319] device-mapper: multipath: version 1.0.5 loaded
[ 8.603343] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 8.603848] EISA: Probing bus 0 at eisa.0
[ 8.603997] EISA: Detected 0 cards.
[ 8.604444] cpuidle: using governor ladder
[ 8.604940] cpuidle: using governor menu
[ 8.608638] TCP cubic registered
[ 8.609399] NET: Registered protocol family 10
[ 8.612333] lo: Disabled Privacy Extensions
[ 8.614620] NET: Registered protocol family 17
[ 8.614715] Bluetooth: L2CAP ver 2.11
[ 8.614720] Bluetooth: L2CAP socket layer initialized
[ 8.614745] Bluetooth: SCO (Voice Link) ver 0.6
[ 8.614750] Bluetooth: SCO socket layer initialized
[ 8.614901] Bluetooth: RFCOMM socket layer initialized
[ 8.614936] Bluetooth: RFCOMM TTY layer initialized
[ 8.614942] Bluetooth: RFCOMM ver 1.10
[ 8.798602] Marking TSC unstable due to cpufreq changes
[ 8.798648] IO APIC resources could be not be allocated.
[ 8.798685] Using IPI No-Shortcut mode
[ 8.798883] registered taskstats version 1
[ 8.799186] Magic number: 13:804:391
[ 8.799193] hub 3-0:1.0: hash matches
[ 8.800601] rtc_cmos 00:06: setting system clock to 2009-06-01 18:23:06 UTC (1243880586)
[ 8.800605] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.800608] EDD information not available.
[ 8.801454] Freeing unused kernel memory: 532k freed
[ 8.801755] Write protecting the kernel text: 4128k
[ 8.801851] Write protecting the kernel read-only data: 1532k
[ 8.803197] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 9.014611] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 9.171760] usb 1-1: configuration #1 chosen from 1 choice
[ 9.209172] Initializing USB Mass Storage driver...
[ 9.224058] scsi2 : SCSI emulation for USB Mass Storage devices
[ 9.256132] usbcore: registered new interface driver usb-storage
[ 9.256154] USB Mass Storage support registered.
[ 9.256342] usb-storage: device found at 2
[ 9.256344] usb-storage: waiting for device to settle before scanning
[ 9.308089] Clocksource tsc unstable (delta = 750042782 ns)
[ 9.760496] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 9.760517] e100: Copyright(c) 1999-2006 Intel Corporation
[ 9.761185] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 9.761207] e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 9.804792] e100 0000:01:08.0: PME# disabled
[ 9.834778] e100: eth0: e100_probe: addr 0xfcffe000, irq 11, MAC addr 00:0f:1f:bc:4b:32
[ 9.834864] b43-pci-bridge 0000:01:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 9.838914] ssb: Sonics Silicon Backplane found on PCI device 0000:01:03.0
[ 9.839417] ohci1394 0000:01:01.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 9.889642] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fcfff800-fcffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 10.673814] PM: Starting manual resume from disk
[ 10.673819] PM: Resume from partition 8:5
[ 10.673821] PM: Checking hibernation image.
[ 10.674129] PM: Resume from disk failed.
[ 10.717078] kjournald starting. Commit interval 5 seconds
[ 10.717107] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.224374] ieee1394: Host added: ID:BUS[0-00:1023] GUID[444fc0001360a030]
[ 14.256664] usb-storage: device scan complete
[ 14.257877] scsi 2:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS
[ 14.259824] sd 2:0:0:0: [sdb] 16056320 512-byte hardware sectors: (8.22 GB/7.65 GiB)
[ 14.260692] sd 2:0:0:0: [sdb] Write Protect is off
[ 14.260695] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 14.260699] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.263569] sd 2:0:0:0: [sdb] 16056320 512-byte hardware sectors: (8.22 GB/7.65 GiB)
[ 14.264442] sd 2:0:0:0: [sdb] Write Protect is off
[ 14.264445] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 14.264448] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.264468] sdb: sdb1
[ 14.265476] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 14.265657] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 17.725454] udev: starting version 141
[ 18.011708] Linux agpgart interface v0.103
[ 18.114957] parport_pc 00:0c: reported by Plug and Play ACPI
[ 18.115053] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 18.140822] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 18.141272] agpgart-intel 0000:00:00.0: detected 892K stolen memory
[ 18.146102] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 18.165337] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/input/input5
[ 18.196413] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 18.196669] ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
[ 18.196952] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:24/input/input6
[ 18.228375] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 18.235783] intel_rng: FWH not detected
[ 18.303625] iTCO_vendor_support: vendor-support=0
[ 18.640207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 18.640743] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
[ 18.640960] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.682795] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.804355] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 19.127765] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 19.166999] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 19.219413] yenta_cardbus 0000:01:01.0: CardBus bridge found [1028:0164]
[ 19.219448] yenta_cardbus 0000:01:01.0: Using CSCINT to route CSC interrupts to PCI
[ 19.219451] yenta_cardbus 0000:01:01.0: Routing CardBus interrupts to PCI
[ 19.219473] yenta_cardbus 0000:01:01.0: TI: mfunc 0x012c1222, devctl 0x64
[ 19.237910] ppdev: user-space parallel port driver
[ 19.364256] cfg80211: Calling CRDA to update world regulatory domain
[ 19.468846] yenta_cardbus 0000:01:01.0: ISA IRQ mask 0x0458, PCI irq 11
[ 19.468868] yenta_cardbus 0000:01:01.0: Socket status: 30000086
[ 19.468874] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
[ 19.468900] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 19.468905] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xefff: clean.
[ 19.470310] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfdffffff
[ 19.470314] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 19.684475] cfg80211: World regulatory domain updated:
[ 19.684480] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.684484] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.684487] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.684507] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.684510] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.684513] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.800752] b43-phy0: Broadcom 4306 WLAN found
[ 19.844934] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 19.869167] phy0: Selected rate control algorithm 'pid'
[ 19.901007] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 20.085373] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 20.143375] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 20.145131] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 20.145863] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 20.145986] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 20.146982] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 20.274980] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 20.275363] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 21.104087] intel8x0_measure_ac97_clock: measured 55004 usecs
[ 21.104090] intel8x0: clocking to 48000
[ 21.379661] lp0: using parport0 (interrupt-driven).
[ 21.534561] Adding 1253028k swap on /dev/sda5. Priority:-1 extents:1 across:1253028k
[ 22.115499] EXT3 FS on sda1, internal journal
[ 23.647772] type=1505 audit(1243880601.343:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2040
[ 23.788377] type=1505 audit(1243880601.487:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2044
[ 23.788760] type=1505 audit(1243880601.487:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2044
[ 23.788907] type=1505 audit(1243880601.487:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2044
[ 23.789028] type=1505 audit(1243880601.487:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2044
[ 24.207940] type=1505 audit(1243880601.903:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2049
[ 24.208729] type=1505 audit(1243880601.907:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2049
[ 24.288791] type=1505 audit(1243880601.987:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2053
[ 28.488180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.488184] Bluetooth: BNEP filters: protocol multicast
[ 28.545746] Bridge firewalling registered
[ 31.876890] [drm] Initialized drm 1.1.0 20060810
[ 31.920775] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 31.920782] pci 0000:00:02.0: setting latency timer to 64
[ 31.921339] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 31.925017] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 31.925079] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 33.396391] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 34.317556] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.409173] input: b43-phy0 as /devices/virtual/input/input10
[ 34.448104] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 34.543191] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 34.580508] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 34.596634] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 34.784068] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 34.784093] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[ 34.784098] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 34.905339] Registered led device: b43-phy0::tx
[ 34.905393] Registered led device: b43-phy0::rx
[ 34.905453] Registered led device: b43-phy0::radio
[ 34.932135] b43-phy0: Radio turned on by software
[ 34.932548] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 92.475716] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 112.951077] UDF-fs: No VRS found
[ 112.976944] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 113.005596] ISO 9660 Extensions: RRIP_1991AVoilà, la dernière commande retourne bcp bcp de choses ^^
#30 Le 01/06/2009, à 18:59
- El Pensador
Re : Problème Connexion Wifi Ubuntu 9.04
Bon, eh bien on avance 
Si tu regardes le "dmesg" la partie intéressante est ici :
[ 34.448104] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 34.543191] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 34.580508] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 34.596634] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 34.784068] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 34.784093] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[ 34.784098] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).Deux choses : tu n'utilises pas la dernière version du pilote, mais le problème n'est pas là. D'après ce site, ta carte n'est pas supportée (le PCI-ID de ta carte est 14e4:4320...).
Essayes de taper cette commande dans un terminal :
sudo /usr/share/b43-fwcutter/install_bcm43xx_firmware.shSource : http://ubuntuforums.org/showthread.php?t=1134787
Ensuite tu actives ta carte avec fn+F2 et tu essayes de scanner les réseaux wifi (sudo iwlist scan)
Si ça ne marche pas, il restera encore une solution à essayer avant d'abdiquer
« À quoi je sers ? Sans doute à rien du tout... »
A Tunisian Girl
Hors ligne
#31 Le 01/06/2009, à 19:04
- Pitox
Re : Problème Connexion Wifi Ubuntu 9.04
Il me dit "command not found" … =/
#32 Le 01/06/2009, à 19:17
- El Pensador
Re : Problème Connexion Wifi Ubuntu 9.04
Est ce que tu as bien ce répertoire : /usr/share/b43-fwcutter
quels sont les fichiers présent dans le répertoire ?
cd /usr/share/b43-fwcutter/
ls -a« À quoi je sers ? Sans doute à rien du tout... »
A Tunisian Girl
Hors ligne
#33 Le 01/06/2009, à 20:25
- Pitox
Re : Problème Connexion Wifi Ubuntu 9.04
Bah non vu qu'il me dit "aucun fichier ou dossier de ce type" …
#34 Le 02/06/2009, à 21:07
- Pitox
Re : Problème Connexion Wifi Ubuntu 9.04
Est ce que tu pourrais continuer à m'aider s'il te plait ?
J'aimerais vraiment pouvoir me connecter à Internet sur cet ordinateur portable ^^