Pages : 1
#1 Le 15/04/2006, à 10:39
- simsimon
config touchpad ?
Bonjour,
J'ai des petits problèmes touchpadiens sur mon Asus A6VA.
Je n'ai pas les fonctions "ascenseur" et quand je passe la frontière "zone ascenseur"/"zone normale", mon curseur fait un bond qui correspond à un demi-écran environ...:/
Donc j'ai installé gsynaptics pour le configurer mais il me dit qu'il faut ajouter la ligne
option "SHMConfig" "true"au fichier xorg.conf
j'ouvre ce fichier et là problème : je ne vois aucune section correspondant au touchpad !
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# paths to defoma fonts
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=5653
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
Mode 0666
EndSectionje la met où ma ligne à ajouter ?
merci de votre aide
Hors ligne
#2 Le 18/04/2006, à 10:11
- quichos
Re : config touchpad ?
J'ai exactempent le même problème sur mon Toshiba M40-331.
Au départ le touchpad ne marchait pas du tout et je n'avait rien dans le xorg.conf. J'ai essayer d'installé des driver, bidouiller des trucs dans le xorg.conf, toujours rien. Et puis suite à une mise à jour de mon Bios, le touchpad est "tombé en marche" mais sans la fonction ascenseur. Mais après vérification, j'ai toujours aucune entrée dans le xorg.conf!
Si quelqu'un à une idée...
Hors ligne
#3 Le 20/04/2006, à 18:47
- Morpheus972
Re : config touchpad ?
simsimon a écrit :
Bonjour,
J'ai des petits problèmes touchpadiens sur mon Asus A6VA.
Je n'ai pas les fonctions "ascenseur" et quand je passe la frontière "zone ascenseur"/"zone normale", mon curseur fait un bond qui correspond à un demi-écran environ...:/Donc j'ai installé gsynaptics pour le configurer mais il me dit qu'il faut ajouter la ligne
option "SHMConfig" "true"au fichier xorg.conf
j'ouvre ce fichier et là problème : je ne vois aucune section correspondant au touchpad !
Section "ServerLayout" Identifier "Server Layout" Screen "Screen0" 0 0 InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath "/usr/X11R6/lib/X11/fonts/local/" # FontPath "/usr/X11R6/lib/X11/fonts/misc/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # paths to defoma fonts # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/CID" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID" EndSection Section "Module" # This loads the DBE extension module. # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # This loads the Type1 and FreeType font modules Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" Load "freetype" # This loads the GLX module Load "glx" # libglx.a Load "dri" # libdri.a EndSection Section "InputDevice" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection Section "InputDevice" # Identifier and driver # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" Option "Device" "/dev/input/mice" # When using XQUEUE, comment out the above two lines, and uncomment EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Device" # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 Identifier "Standard VGA" Driver "vga" VendorName "Unknown" BoardName "Unknown" EndSection Section "Device" # ### generic DRI settings ### # === disable PnP Monitor === #Option "NoDDC" # === disable/enable XAA/DRI === # ### FireGL DDX driver module specific settings ### # === Screen Management === # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically # vendor=1002, device=5653 Identifier "ATI Graphics Adapter" Driver "fglrx" Option "no_accel" "no" Option "no_dri" "no" # === misc DRI settings === Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr Option "DesktopSetup" "(null)" Option "ScreenOverlap" "0" Option "GammaCorrectionI" "0x06419064" Option "GammaCorrectionII" "0x06419064" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "CapabilitiesEx" "0x00000000" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" # === OpenGL Overlay === Option "OpenGLOverlay" "off" # === Center Mode (Laptops only) === Option "CenterMode" "off" # === Pseudo Color Visuals (8-bit visuals) === Option "PseudoColorVisuals" "off" # === QBS Management === Option "Stereo" "off" Option "StereoSyncEnable" "1" # === FSAA Management === Option "FSAAEnable" "no" Option "FSAAScale" "1" Option "FSAADisableGamma" "no" Option "FSAACustomizeMSPos" "no" Option "FSAAMSPosX0" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAAMSPosX1" "0.000000" Option "FSAAMSPosY1" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosY2" "0.000000" Option "FSAAMSPosX3" "0.000000" Option "FSAAMSPosY3" "0.000000" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosY5" "0.000000" # === Misc Options === Option "UseFastTLS" "0" Option "BlockSignalsOnLock" "on" Option "UseInternalAGPGART" "yes" Option "ForceGenericCPU" "no" BusID "PCI:3:0:0" EndSection Section "Screen" #Option "backingstore" Identifier "Screen0" Device "ATI Graphics Adapter" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" # initial origin if mode is smaller than desktop # Virtual 1280 1024 Viewport 0 0 Depth 24 Modes "1280x1024" "1280x800" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" # Access to OpenGL ICD is allowed for all users: # Access to OpenGL ICD is restricted to a specific user group: # Group 100 # users # Mode 0660 Mode 0666 EndSectionje la met où ma ligne à ajouter ?
merci de votre aide
Bonjour... C'est normalement très simple. Il s'agit de la souris, par conséquent il vous faut insérer cette ligne dans la section InputDevice dédiée à la souris (Mouse).
Donc ici :
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSectionPages : 1