->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

Jos31 · Le 30/11/2009, à 13:41

Bon, on va essayer avec la derniere version de ndiswrapper

Tape ceci

wget http://freefr.dl.sourceforge.net/project/ndiswrapper/stable/1.55/ndiswrapper-1.55.tar.gz
tar xvzf ndiswrapper-1.55.tar.gz
cd ndiswrapper-1.55/driver/
make
sudo insmod ./ndiswrapper.ko

La derniere ligne est susceptible de te faire crasher, c'est l'équivalent du modprobe

Dernière modification par Jos31 (Le 30/11/2009, à 13:41)

snoogy · Le 30/11/2009, à 13:44

voici l'erreur lors du "make"

make -C /usr/src/linux-headers-2.6.31-15-generic M=/home/snoogy/ndiswrapper-1.55/driver
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.31-15-generic »
LD /home/snoogy/ndiswrapper-1.55/driver/built-in.o
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/crt_exports.h
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/hal_exports.h
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/ndis_exports.h
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/ntoskernel_exports.h
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/ntoskernel_io_exports.h
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/rtl_exports.h
MKEXPORT /home/snoogy/ndiswrapper-1.55/driver/usb_exports.h
CC [M] /home/snoogy/ndiswrapper-1.55/driver/crt.o
In file included from /home/snoogy/ndiswrapper-1.55/driver/crt.c:16:
/home/snoogy/ndiswrapper-1.55/driver/ntoskernel.h: In function ‘PushEntrySList’:
/home/snoogy/ndiswrapper-1.55/driver/ntoskernel.h:905: error: implicit declaration of function ‘cmpxchg8b’
make[2]: *** [/home/snoogy/ndiswrapper-1.55/driver/crt.o] Erreur 1
make[1]: *** [_module_/home/snoogy/ndiswrapper-1.55/driver] Erreur 2
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.31-15-generic »
make: *** [modules] Erreur 2

Dernière modification par snoogy (Le 30/11/2009, à 13:45)

Jos31 · Le 30/11/2009, à 13:52

Edite le fichier /home/snoogy/ndiswrapper-1.55/driver/ntoskernel.h

gedit /home/snoogy/ndiswrapper-1.55/driver/ntoskernel.h

Cherche le passage suivant (normalement ligne 878)

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)
static inline u64 cmpxchg8b(volatile u64 *ptr, u64 old, u64 new)
{
	u64 prev;

	__asm__ __volatile__(
		"\n"
		LOCK_PREFIX "cmpxchg8b %0\n"
		: "+m" (*ptr), "=A" (prev)
		: "A" (old), "b" (u64_low_32(new)), "c" (u64_high_32(new)));
	return prev;
}
#endif

Et remplace le par ceci:

//#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)
static inline u64 cmpxchg8b(volatile u64 *ptr, u64 old, u64 new)
{
	u64 prev;

	__asm__ __volatile__(
		"\n"
		LOCK_PREFIX "cmpxchg8b %0\n"
		: "+m" (*ptr), "=A" (prev)
		: "A" (old), "b" (u64_low_32(new)), "c" (u64_high_32(new)));
	return prev;
}
//#endif

Sauvegarde, puis refait ensuite le make et le insmod:

cd /home/snoogy/ndiswrapper-1.55/driver/
make
sudo insmod ./ndiswrapper.ko

snoogy · Le 30/11/2009, à 13:59

ceci a régler le problème partiellement, il reste l'erreur:

make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.31-15-generic »

j'ai tout de même fait: sudo insmod ./ndiswrapper.ko

et la ça a planter exactement comme pour modeprobe ndiswrapper...

Jos31 · Le 30/11/2009, à 14:46

On va essayer de débugger
Ca va encore faire crasher ton systeme mais bon ca fera peut etre avancer le schimlblick.

cd /home/snoogy/ndiswrapper-1.55/driver/
make clean
make DEBUG=6
sudo insmod ./ndiswrapper.ko

Apres le crash regarde les messages dans /var/log/messages, ou bien avec la commande dmesg

Dernière modification par Jos31 (Le 30/11/2009, à 14:47)

snoogy · Le 30/11/2009, à 15:06

voila c'est fait.. c'etais le crash assuré

ici le log/message:

Nov 30 13:52:19 shadow kernel: [ 3397.272094] usb 2-2: USB disconnect, address 6
Nov 30 13:52:20 shadow udev-configure-printer: Disabled printer ipp://localhost:631/printers/Deskjet-F2100-series as the corresponding device was unplugged or turned off
Nov 30 13:52:26 shadow kernel: [ 3403.916036] usb 2-1: new low speed USB device using uhci_hcd and address 7
Nov 30 13:52:26 shadow kernel: [ 3404.083192] usb 2-1: configuration #1 chosen from 1 choice
Nov 30 13:52:26 shadow kernel: [ 3404.100515] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input10
Nov 30 13:52:26 shadow kernel: [ 3404.100618] generic-usb 0003:04F3:0212.0002: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
Nov 30 13:57:50 shadow kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Nov 30 13:57:50 shadow rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="852" x-info="http://www.rsyslog.com"] (re)start
Nov 30 13:57:50 shadow rsyslogd: rsyslogd's groupid changed to 102
Nov 30 13:57:50 shadow rsyslogd: rsyslogd's userid changed to 101
Nov 30 13:57:50 shadow kernel: [    0.000000] Initializing cgroup subsys cpuset
Nov 30 13:57:50 shadow kernel: [    0.000000] Initializing cgroup subsys cpu
Nov 30 13:57:50 shadow kernel: [    0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)
Nov 30 13:57:50 shadow kernel: [    0.000000] KERNEL supported cpus:
Nov 30 13:57:50 shadow kernel: [    0.000000]   Intel GenuineIntel
Nov 30 13:57:50 shadow kernel: [    0.000000]   AMD AuthenticAMD
Nov 30 13:57:50 shadow kernel: [    0.000000]   NSC Geode by NSC
Nov 30 13:57:50 shadow kernel: [    0.000000]   Cyrix CyrixInstead
Nov 30 13:57:50 shadow kernel: [    0.000000]   Centaur CentaurHauls
Nov 30 13:57:50 shadow kernel: [    0.000000]   Transmeta GenuineTMx86
Nov 30 13:57:50 shadow kernel: [    0.000000]   Transmeta TransmetaCPU
Nov 30 13:57:50 shadow kernel: [    0.000000]   UMC UMC UMC UMC
Nov 30 13:57:50 shadow kernel: [    0.000000] BIOS-provided physical RAM map:
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 000000003f69e000 - 000000003f700000 (ACPI NVS)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000] DMI present.
Nov 30 13:57:50 shadow kernel: [    0.000000] last_pfn = 0x3f690 max_arch_pfn = 0x100000
Nov 30 13:57:50 shadow kernel: [    0.000000] PAT not supported by CPU.
Nov 30 13:57:50 shadow kernel: [    0.000000] Scanning 1 areas for low memory corruption
Nov 30 13:57:50 shadow kernel: [    0.000000] modified physical RAM map:
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000000dc000 - 00000000000e0000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 0000000000100000 - 000000003f690000 (usable)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 000000003f690000 - 000000003f69e000 (ACPI data)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 000000003f69e000 - 000000003f700000 (ACPI NVS)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 000000003f700000 - 0000000040000000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
Nov 30 13:57:50 shadow kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Nov 30 13:57:50 shadow kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Nov 30 13:57:50 shadow kernel: [    0.000000] RAMDISK: 2f1e1000 - 2f92b2b2
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: RSDP 000f77b0 00014 (v00 FSC   )
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: RSDT 3f698903 0004C (v01 FSC    PC       06040000  LTP 00000000)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: FACP 3f69dcb8 00074 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: DSDT 3f699215 04AA3 (v01 UW____ F39_____ 06040000 INTL 20050624)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: FACS 3f69efc0 00040
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: APIC 3f69dd2c 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: HPET 3f69dd94 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: MCFG 3f69ddcc 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: APIC 3f69de08 0005A (v01 FSC    PC       06040000  LTP 00000000)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: SLIC 3f69de62 00176 (v01 FSC    PC       06040000  LTP 00000000)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: BOOT 3f69dfd8 00028 (v01 MSTEST TESTONLY 06040000  LTP 00000001)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: SSDT 3f69900b 0020A (v01 SataRe SataAhci 00001000 INTL 20050624)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: SSDT 3f698e45 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: SSDT 3f69894f 004F6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Nov 30 13:57:50 shadow kernel: [    0.000000] 126MB HIGHMEM available.
Nov 30 13:57:50 shadow kernel: [    0.000000] 887MB LOWMEM available.
Nov 30 13:57:50 shadow kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Nov 30 13:57:50 shadow kernel: [    0.000000]   low ram: 0 - 377fe000
Nov 30 13:57:50 shadow kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Nov 30 13:57:50 shadow kernel: [    0.000000]   node 0 bootmap 00008000 - 0000ef00
Nov 30 13:57:50 shadow kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #4 [002f1e1000 - 002f92b2b2]          RAMDISK ==> [002f1e1000 - 002f92b2b2]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #6 [00008a9000 - 00008ac120]              BRK ==> [00008a9000 - 00008ac120]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
Nov 30 13:57:50 shadow kernel: [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Nov 30 13:57:50 shadow kernel: [    0.000000] found SMP MP-table at [c00f7860] f7860
Nov 30 13:57:50 shadow kernel: [    0.000000] Zone PFN ranges:
Nov 30 13:57:50 shadow kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Nov 30 13:57:50 shadow kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Nov 30 13:57:50 shadow kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f690
Nov 30 13:57:50 shadow kernel: [    0.000000] Movable zone start PFN for each node
Nov 30 13:57:50 shadow kernel: [    0.000000] early_node_map[3] active PFN ranges
Nov 30 13:57:50 shadow kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Nov 30 13:57:50 shadow kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Nov 30 13:57:50 shadow kernel: [    0.000000]     0: 0x00000100 -> 0x0003f690
Nov 30 13:57:50 shadow kernel: [    0.000000] Using APIC driver default
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Nov 30 13:57:50 shadow kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 30 13:57:50 shadow kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Nov 30 13:57:50 shadow kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Nov 30 13:57:50 shadow kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Nov 30 13:57:50 shadow kernel: [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Nov 30 13:57:50 shadow kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Nov 30 13:57:50 shadow kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Nov 30 13:57:50 shadow kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
Nov 30 13:57:50 shadow kernel: [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
Nov 30 13:57:50 shadow kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
Nov 30 13:57:50 shadow kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Nov 30 13:57:50 shadow kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Nov 30 13:57:50 shadow kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Nov 30 13:57:50 shadow kernel: [    0.000000] PERCPU: Embedded 14 pages at c17f4000, static data 35612 bytes
Nov 30 13:57:50 shadow kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257597
Nov 30 13:57:50 shadow kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=e634dabb-b4d4-429a-8b87-1283b8161d2e ro ipv6.disable=1 quiet splash
Nov 30 13:57:50 shadow kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 30 13:57:50 shadow kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 30 13:57:50 shadow kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 30 13:57:50 shadow kernel: [    0.000000] Enabling fast FPU save and restore... done.
Nov 30 13:57:50 shadow kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Nov 30 13:57:50 shadow kernel: [    0.000000] Initializing CPU#0
Nov 30 13:57:50 shadow kernel: [    0.000000] allocated 5194560 bytes of page_cgroup
Nov 30 13:57:50 shadow kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 30 13:57:50 shadow kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f690)
Nov 30 13:57:50 shadow kernel: [    0.000000] Memory: 1008568k/1038912k available (4566k kernel code, 29480k reserved, 2142k data, 540k init, 129608k highmem)
Nov 30 13:57:50 shadow kernel: [    0.000000] virtual kernel memory layout:
Nov 30 13:57:50 shadow kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Nov 30 13:57:50 shadow kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Nov 30 13:57:50 shadow kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Nov 30 13:57:50 shadow kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Nov 30 13:57:50 shadow kernel: [    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
Nov 30 13:57:50 shadow kernel: [    0.000000]       .data : 0xc0575b44 - 0xc078d3c8   (2142 kB)
Nov 30 13:57:50 shadow kernel: [    0.000000]       .text : 0xc0100000 - 0xc0575b44   (4566 kB)
Nov 30 13:57:50 shadow kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 30 13:57:50 shadow kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Nov 30 13:57:50 shadow kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Nov 30 13:57:50 shadow kernel: [    0.000000] Fast TSC calibration using PIT
Nov 30 13:57:50 shadow kernel: [    0.000000] Detected 1866.963 MHz processor.
Nov 30 13:57:50 shadow kernel: [    0.001562] Console: colour VGA+ 80x25
Nov 30 13:57:50 shadow kernel: [    0.001566] console [tty0] enabled
Nov 30 13:57:50 shadow kernel: [    0.001759] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Nov 30 13:57:50 shadow kernel: [    0.001766] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.92 BogoMIPS (lpj=7467852)
Nov 30 13:57:50 shadow kernel: [    0.001787] Security Framework initialized
Nov 30 13:57:50 shadow kernel: [    0.001810] AppArmor: AppArmor initialized
Nov 30 13:57:50 shadow kernel: [    0.001819] Mount-cache hash table entries: 512
Nov 30 13:57:50 shadow kernel: [    0.001966] Initializing cgroup subsys ns
Nov 30 13:57:50 shadow kernel: [    0.001972] Initializing cgroup subsys cpuacct
Nov 30 13:57:50 shadow kernel: [    0.001976] Initializing cgroup subsys memory
Nov 30 13:57:50 shadow kernel: [    0.001984] Initializing cgroup subsys freezer
Nov 30 13:57:50 shadow kernel: [    0.001986] Initializing cgroup subsys net_cls
Nov 30 13:57:50 shadow kernel: [    0.002003] CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 30 13:57:50 shadow kernel: [    0.002006] CPU: L2 cache: 1024K
Nov 30 13:57:50 shadow kernel: [    0.002011] mce: CPU supports 6 MCE banks
Nov 30 13:57:50 shadow kernel: [    0.002021] CPU0: Thermal monitoring enabled (TM1)
Nov 30 13:57:50 shadow kernel: [    0.002026] using mwait in idle threads.
Nov 30 13:57:50 shadow kernel: [    0.002034] Performance Counters: no PMU driver, software counters only.
Nov 30 13:57:50 shadow kernel: [    0.002041] Checking 'hlt' instruction... OK.
Nov 30 13:57:50 shadow kernel: [    0.016891] SMP alternatives: switching to UP code
Nov 30 13:57:50 shadow kernel: [    0.023903] ACPI: Core revision 20090521
Nov 30 13:57:50 shadow kernel: [    0.036450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 30 13:57:50 shadow kernel: [    0.078437] CPU0: Intel(R) Celeron(R) M CPU        440  @ 1.86GHz stepping 0c
Nov 30 13:57:50 shadow kernel: [    0.080001] APIC calibration not consistent with PM-Timer: 163ms instead of 100ms
Nov 30 13:57:50 shadow kernel: [    0.080001] APIC delta adjusted to PM-Timer: 833361 (1366698)
Nov 30 13:57:50 shadow kernel: [    0.080001] Brought up 1 CPUs
Nov 30 13:57:50 shadow kernel: [    0.080001] Total of 1 processors activated (3733.92 BogoMIPS).
Nov 30 13:57:50 shadow kernel: [    0.080001] Booting paravirtualized kernel on bare hardware
Nov 30 13:57:50 shadow kernel: [    0.080001] regulator: core version 0.5
Nov 30 13:57:50 shadow kernel: [    0.080001] Time: 13:57:20  Date: 11/30/09
Nov 30 13:57:50 shadow kernel: [    0.080001] NET: Registered protocol family 16
Nov 30 13:57:50 shadow kernel: [    0.080001] EISA bus registered
Nov 30 13:57:50 shadow kernel: [    0.080001] ACPI: bus type pci registered
Nov 30 13:57:50 shadow kernel: [    0.080001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Nov 30 13:57:50 shadow kernel: [    0.080001] PCI: MCFG area at e0000000 reserved in E820
Nov 30 13:57:50 shadow kernel: [    0.080001] PCI: Using MMCONFIG for extended config space
Nov 30 13:57:50 shadow kernel: [    0.080001] PCI: Using configuration type 1 for base access
Nov 30 13:57:50 shadow kernel: [    0.080001] bio: create slab <bio-0> at 0
Nov 30 13:57:50 shadow kernel: [    0.080794] ACPI: BIOS _OSI(Linux) query ignored
Nov 30 13:57:50 shadow kernel: [    0.081594] ACPI: EC: non-query interrupt received, switching to interrupt mode
Nov 30 13:57:50 shadow kernel: [    0.088066] ACPI: Interpreter enabled
Nov 30 13:57:50 shadow kernel: [    0.088074] ACPI: (supports S0 S3 S4 S5)
Nov 30 13:57:50 shadow kernel: [    0.088095] ACPI: Using IOAPIC for interrupt routing
Nov 30 13:57:50 shadow kernel: [    0.093318] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
Nov 30 13:57:50 shadow kernel: [    0.093323] ACPI: EC: driver started in interrupt mode
Nov 30 13:57:50 shadow kernel: [    0.093651] ACPI: No dock devices found.
Nov 30 13:57:50 shadow kernel: [    0.094187] ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 30 13:57:50 shadow kernel: [    0.094527] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Nov 30 13:57:50 shadow kernel: [    0.094533] pci 0000:00:1b.0: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.094623] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Nov 30 13:57:50 shadow kernel: [    0.094628] pci 0000:00:1c.0: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.094720] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Nov 30 13:57:50 shadow kernel: [    0.094725] pci 0000:00:1c.1: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.094817] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Nov 30 13:57:50 shadow kernel: [    0.094822] pci 0000:00:1c.2: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.095227] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Nov 30 13:57:50 shadow kernel: [    0.095233] pci 0000:00:1d.7: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.095407] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Nov 30 13:57:50 shadow kernel: [    0.095412] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
Nov 30 13:57:50 shadow kernel: [    0.095417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007)
Nov 30 13:57:50 shadow kernel: [    0.095422] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0200 (mask 000f)
Nov 30 13:57:50 shadow kernel: [    0.095661] pci 0000:00:1f.2: PME# supported from D3hot
Nov 30 13:57:50 shadow kernel: [    0.095666] pci 0000:00:1f.2: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.096119] pci 0000:06:05.0: PME# supported from D1 D2 D3hot D3cold
Nov 30 13:57:50 shadow kernel: [    0.096125] pci 0000:06:05.0: PME# disabled
Nov 30 13:57:50 shadow kernel: [    0.096182] pci 0000:00:1e.0: transparent bridge
Nov 30 13:57:50 shadow kernel: [    0.100042] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Nov 30 13:57:50 shadow kernel: [    0.100149] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Nov 30 13:57:50 shadow kernel: [    0.100253] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
Nov 30 13:57:50 shadow kernel: [    0.100359] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Nov 30 13:57:50 shadow kernel: [    0.100463] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Nov 30 13:57:50 shadow kernel: [    0.100572] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Nov 30 13:57:50 shadow kernel: [    0.100677] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Nov 30 13:57:50 shadow kernel: [    0.100780] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Nov 30 13:57:50 shadow kernel: [    0.100970] SCSI subsystem initialized
Nov 30 13:57:50 shadow kernel: [    0.101109] usbcore: registered new interface driver usbfs
Nov 30 13:57:50 shadow kernel: [    0.101126] usbcore: registered new interface driver hub
Nov 30 13:57:50 shadow kernel: [    0.101153] usbcore: registered new device driver usb
Nov 30 13:57:50 shadow kernel: [    0.101297] ACPI: WMI: Mapper loaded
Nov 30 13:57:50 shadow kernel: [    0.101300] PCI: Using ACPI for IRQ routing
Nov 30 13:57:50 shadow kernel: [    0.101465] Bluetooth: Core ver 2.15
Nov 30 13:57:50 shadow kernel: [    0.101494] NET: Registered protocol family 31
Nov 30 13:57:50 shadow kernel: [    0.101496] Bluetooth: HCI device and connection manager initialized
Nov 30 13:57:50 shadow kernel: [    0.101501] Bluetooth: HCI socket layer initialized
Nov 30 13:57:50 shadow kernel: [    0.101503] NetLabel: Initializing
Nov 30 13:57:50 shadow kernel: [    0.101505] NetLabel:  domain hash size = 128
Nov 30 13:57:50 shadow kernel: [    0.101507] NetLabel:  protocols = UNLABELED CIPSOv4
Nov 30 13:57:50 shadow kernel: [    0.101521] NetLabel:  unlabeled traffic allowed by default
Nov 30 13:57:50 shadow kernel: [    0.101554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Nov 30 13:57:50 shadow kernel: [    0.101559] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Nov 30 13:57:50 shadow kernel: [    0.105681] pnp: PnP ACPI init
Nov 30 13:57:50 shadow kernel: [    0.105702] ACPI: bus type pnp registered
Nov 30 13:57:50 shadow kernel: [    0.105805] pnp: PnP ACPI: found 11 devices
Nov 30 13:57:50 shadow kernel: [    0.105805] ACPI: ACPI bus type pnp unregistered
Nov 30 13:57:50 shadow kernel: [    0.105805] PnPBIOS: Disabled by ACPI PNP
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:06: ioport range 0x200-0x20f has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:06: ioport range 0x680-0x69f has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:06: ioport range 0x800-0x80f has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:06: ioport range 0x1000-0x107f has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:06: ioport range 0x1180-0x11bf has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:06: ioport range 0x1640-0x164f has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:07: ioport range 0x6a0-0x6af has been reserved
Nov 30 13:57:50 shadow kernel: [    0.105805] system 00:07: ioport range 0x6b0-0x6ff has been reserved
Nov 30 13:57:50 shadow kernel: [    0.142482] AppArmor: AppArmor Filesystem Enabled
Nov 30 13:57:50 shadow kernel: [    0.142537] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
Nov 30 13:57:50 shadow kernel: [    0.142541] pci 0000:00:1c.0:   IO window: 0xf000-0xffff
Nov 30 13:57:50 shadow kernel: [    0.142548] pci 0000:00:1c.0:   MEM window: 0xfac00000-0xfebfffff
Nov 30 13:57:50 shadow kernel: [    0.142554] pci 0000:00:1c.0:   PREFETCH window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142559] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
Nov 30 13:57:50 shadow kernel: [    0.142562] pci 0000:00:1c.1:   IO window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142568] pci 0000:00:1c.1:   MEM window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142573] pci 0000:00:1c.1:   PREFETCH window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142578] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
Nov 30 13:57:50 shadow kernel: [    0.142581] pci 0000:00:1c.2:   IO window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142587] pci 0000:00:1c.2:   MEM window: 0xf7000000-0xf70fffff
Nov 30 13:57:50 shadow kernel: [    0.142593] pci 0000:00:1c.2:   PREFETCH window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142598] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
Nov 30 13:57:50 shadow kernel: [    0.142602] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
Nov 30 13:57:50 shadow kernel: [    0.142609] pci 0000:00:1e.0:   MEM window: 0xf0200000-0xf02fffff
Nov 30 13:57:50 shadow kernel: [    0.142614] pci 0000:00:1e.0:   PREFETCH window: disabled
Nov 30 13:57:50 shadow kernel: [    0.142627] pci 0000:00:1c.0: enabling device (0000 -> 0003)
Nov 30 13:57:50 shadow kernel: [    0.142643] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 30 13:57:50 shadow kernel: [    0.142666] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Nov 30 13:57:50 shadow kernel: [    0.142682] pci 0000:00:1c.2: enabling device (0000 -> 0002)
Nov 30 13:57:50 shadow kernel: [    0.142692] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Nov 30 13:57:50 shadow kernel: [    0.142778] NET: Registered protocol family 2
Nov 30 13:57:50 shadow kernel: [    0.142880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 30 13:57:50 shadow kernel: [    0.143198] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 30 13:57:50 shadow kernel: [    0.143909] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 30 13:57:50 shadow kernel: [    0.144291] TCP: Hash tables configured (established 131072 bind 65536)
Nov 30 13:57:50 shadow kernel: [    0.144295] TCP reno registered
Nov 30 13:57:50 shadow kernel: [    0.144419] NET: Registered protocol family 1
Nov 30 13:57:50 shadow kernel: [    0.144493] Trying to unpack rootfs image as initramfs...
Nov 30 13:57:50 shadow kernel: [    0.363045] Freeing initrd memory: 7464k freed
Nov 30 13:57:50 shadow kernel: [    0.368042] Simple Boot Flag at 0x35 set to 0x1
Nov 30 13:57:50 shadow kernel: [    0.368174] cpufreq-nforce2: No nForce2 chipset.
Nov 30 13:57:50 shadow kernel: [    0.368217] Scanning for low memory corruption every 60 seconds
Nov 30 13:57:50 shadow kernel: [    0.368337] audit: initializing netlink socket (disabled)
Nov 30 13:57:50 shadow kernel: [    0.368356] type=2000 audit(1259589440.367:1): initialized
Nov 30 13:57:50 shadow kernel: [    0.377701] highmem bounce pool size: 64 pages
Nov 30 13:57:50 shadow kernel: [    0.377708] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Nov 30 13:57:50 shadow kernel: [    0.379226] VFS: Disk quotas dquot_6.5.2
Nov 30 13:57:50 shadow kernel: [    0.379286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 30 13:57:50 shadow kernel: [    0.379867] fuse init (API version 7.12)
Nov 30 13:57:50 shadow kernel: [    0.379953] msgmni has been set to 1732
Nov 30 13:57:50 shadow kernel: [    0.380174] alg: No test for stdrng (krng)
Nov 30 13:57:50 shadow kernel: [    0.380187] io scheduler noop registered
Nov 30 13:57:50 shadow kernel: [    0.380190] io scheduler anticipatory registered
Nov 30 13:57:50 shadow kernel: [    0.380192] io scheduler deadline registered
Nov 30 13:57:50 shadow kernel: [    0.380239] io scheduler cfq registered (default)
Nov 30 13:57:50 shadow kernel: [    0.380981] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 30 13:57:50 shadow kernel: [    0.381085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 30 13:57:50 shadow kernel: [    0.381517] ACPI: AC Adapter [AC0] (on-line)
Nov 30 13:57:50 shadow kernel: [    0.381605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Nov 30 13:57:50 shadow kernel: [    0.381610] ACPI: Power Button [PWRF]
Nov 30 13:57:50 shadow kernel: [    0.381662] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
Nov 30 13:57:50 shadow kernel: [    0.381701] ACPI: Lid Switch [LID0]
Nov 30 13:57:50 shadow kernel: [    0.381749] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
Nov 30 13:57:50 shadow kernel: [    0.381752] ACPI: Power Button [PWRB]
Nov 30 13:57:50 shadow kernel: [    0.381801] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Nov 30 13:57:50 shadow kernel: [    0.381804] ACPI: Sleep Button [SLPB]
Nov 30 13:57:50 shadow kernel: [    0.382525] Marking TSC unstable due to TSC halts in idle
Nov 30 13:57:50 shadow kernel: [    0.382583] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Nov 30 13:57:50 shadow kernel: [    0.382610] processor LNXCPU:00: registered as cooling_device0
Nov 30 13:57:50 shadow kernel: [    0.382614] ACPI: Processor [CPU0] (supports 8 throttling states)
Nov 30 13:57:50 shadow kernel: [    0.384903] thermal LNXTHERM:01: registered as thermal_zone0
Nov 30 13:57:50 shadow kernel: [    0.384912] ACPI: Thermal Zone [THRM] (65 C)
Nov 30 13:57:50 shadow kernel: [    0.384966] isapnp: Scanning for PnP cards...
Nov 30 13:57:50 shadow kernel: [    0.739428] isapnp: No Plug & Play device found
Nov 30 13:57:50 shadow kernel: [    0.743068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 30 13:57:50 shadow kernel: [    0.744446] brd: module loaded
Nov 30 13:57:50 shadow kernel: [    0.744903] loop: module loaded
Nov 30 13:57:50 shadow kernel: [    0.744985] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Nov 30 13:57:50 shadow kernel: [    0.745097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Nov 30 13:57:50 shadow kernel: [    0.745231] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
Nov 30 13:57:50 shadow kernel: [    0.745235] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
Nov 30 13:57:50 shadow kernel: [    0.745461] scsi0 : ahci
Nov 30 13:57:50 shadow kernel: [    0.745594] scsi1 : ahci
Nov 30 13:57:50 shadow kernel: [    0.745657] scsi2 : ahci
Nov 30 13:57:50 shadow kernel: [    0.745766] scsi3 : ahci
Nov 30 13:57:50 shadow kernel: [    0.745909] ata1: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004500 irq 27
Nov 30 13:57:50 shadow kernel: [    0.745912] ata2: DUMMY
Nov 30 13:57:50 shadow kernel: [    0.745916] ata3: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004600 irq 27
Nov 30 13:57:50 shadow kernel: [    0.745918] ata4: DUMMY
Nov 30 13:57:50 shadow kernel: [    0.745978] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Nov 30 13:57:50 shadow kernel: [    0.746102] scsi4 : ata_piix
Nov 30 13:57:50 shadow kernel: [    0.746274] scsi5 : ata_piix
Nov 30 13:57:50 shadow kernel: [    0.746860] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
Nov 30 13:57:50 shadow kernel: [    0.746863] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Nov 30 13:57:50 shadow kernel: [    0.747705] Fixed MDIO Bus: probed
Nov 30 13:57:50 shadow kernel: [    0.747744] PPP generic driver version 2.4.2
Nov 30 13:57:50 shadow kernel: [    0.747852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 30 13:57:50 shadow kernel: [    0.747887] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Nov 30 13:57:50 shadow kernel: [    0.747908] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 30 13:57:50 shadow kernel: [    0.747970] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Nov 30 13:57:50 shadow kernel: [    0.751882] ehci_hcd 0000:00:1d.7: debug port 1
Nov 30 13:57:50 shadow kernel: [    0.752061] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
Nov 30 13:57:50 shadow kernel: [    0.759136] ACPI: Battery Slot [BAT0] (battery present)
Nov 30 13:57:50 shadow kernel: [    0.764016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Nov 30 13:57:50 shadow kernel: [    0.764114] usb usb1: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    0.764146] hub 1-0:1.0: USB hub found
Nov 30 13:57:50 shadow kernel: [    0.764155] hub 1-0:1.0: 8 ports detected
Nov 30 13:57:50 shadow kernel: [    0.764231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 30 13:57:50 shadow kernel: [    0.764251] uhci_hcd: USB Universal Host Controller Interface driver
Nov 30 13:57:50 shadow kernel: [    0.764293] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Nov 30 13:57:50 shadow kernel: [    0.764306] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 30 13:57:50 shadow kernel: [    0.764346] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Nov 30 13:57:50 shadow kernel: [    0.764376] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
Nov 30 13:57:50 shadow kernel: [    0.764457] usb usb2: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    0.764483] hub 2-0:1.0: USB hub found
Nov 30 13:57:50 shadow kernel: [    0.764491] hub 2-0:1.0: 2 ports detected
Nov 30 13:57:50 shadow kernel: [    0.764538] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Nov 30 13:57:50 shadow kernel: [    0.764549] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 30 13:57:50 shadow kernel: [    0.764586] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Nov 30 13:57:50 shadow kernel: [    0.764624] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
Nov 30 13:57:50 shadow kernel: [    0.764702] usb usb3: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    0.764728] hub 3-0:1.0: USB hub found
Nov 30 13:57:50 shadow kernel: [    0.764736] hub 3-0:1.0: 2 ports detected
Nov 30 13:57:50 shadow kernel: [    0.764783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Nov 30 13:57:50 shadow kernel: [    0.764795] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 30 13:57:50 shadow kernel: [    0.764825] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Nov 30 13:57:50 shadow kernel: [    0.764860] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
Nov 30 13:57:50 shadow kernel: [    0.764940] usb usb4: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    0.764966] hub 4-0:1.0: USB hub found
Nov 30 13:57:50 shadow kernel: [    0.764973] hub 4-0:1.0: 2 ports detected
Nov 30 13:57:50 shadow kernel: [    0.765024] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Nov 30 13:57:50 shadow kernel: [    0.765035] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 30 13:57:50 shadow kernel: [    0.765065] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Nov 30 13:57:50 shadow kernel: [    0.765102] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
Nov 30 13:57:50 shadow kernel: [    0.765180] usb usb5: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    0.765207] hub 5-0:1.0: USB hub found
Nov 30 13:57:50 shadow kernel: [    0.765214] hub 5-0:1.0: 2 ports detected
Nov 30 13:57:50 shadow kernel: [    0.765323] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 30 13:57:50 shadow kernel: [    0.767552] i8042.c: Detected active multiplexing controller, rev 1.1.
Nov 30 13:57:50 shadow kernel: [    0.768834] serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 30 13:57:50 shadow kernel: [    0.768840] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Nov 30 13:57:50 shadow kernel: [    0.768844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Nov 30 13:57:50 shadow kernel: [    0.768847] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Nov 30 13:57:50 shadow kernel: [    0.768850] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Nov 30 13:57:50 shadow kernel: [    0.768913] mice: PS/2 mouse device common for all mice
Nov 30 13:57:50 shadow kernel: [    0.769083] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
Nov 30 13:57:50 shadow kernel: [    0.769116] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Nov 30 13:57:50 shadow kernel: [    0.769232] device-mapper: uevent: version 1.0.3
Nov 30 13:57:50 shadow kernel: [    0.769335] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Nov 30 13:57:50 shadow kernel: [    0.769421] device-mapper: multipath: version 1.1.0 loaded
Nov 30 13:57:50 shadow kernel: [    0.769424] device-mapper: multipath round-robin: version 1.0.0 loaded
Nov 30 13:57:50 shadow kernel: [    0.769547] EISA: Probing bus 0 at eisa.0
Nov 30 13:57:50 shadow kernel: [    0.769554] Cannot allocate resource for EISA slot 1
Nov 30 13:57:50 shadow kernel: [    0.769557] Cannot allocate resource for EISA slot 2
Nov 30 13:57:50 shadow kernel: [    0.769583] EISA: Detected 0 cards.
Nov 30 13:57:50 shadow kernel: [    0.769668] cpuidle: using governor ladder
Nov 30 13:57:50 shadow kernel: [    0.769733] cpuidle: using governor menu
Nov 30 13:57:50 shadow kernel: [    0.770239] TCP cubic registered
Nov 30 13:57:50 shadow kernel: [    0.770242] IPv6: Loaded, but administratively disabled, reboot required to enable
Nov 30 13:57:50 shadow kernel: [    0.770246] NET: Registered protocol family 17
Nov 30 13:57:50 shadow kernel: [    0.770266] Bluetooth: L2CAP ver 2.13
Nov 30 13:57:50 shadow kernel: [    0.770267] Bluetooth: L2CAP socket layer initialized
Nov 30 13:57:50 shadow kernel: [    0.770270] Bluetooth: SCO (Voice Link) ver 0.6
Nov 30 13:57:50 shadow kernel: [    0.770272] Bluetooth: SCO socket layer initialized
Nov 30 13:57:50 shadow kernel: [    0.770302] Bluetooth: RFCOMM TTY layer initialized
Nov 30 13:57:50 shadow kernel: [    0.770305] Bluetooth: RFCOMM socket layer initialized
Nov 30 13:57:50 shadow kernel: [    0.770307] Bluetooth: RFCOMM ver 1.11
Nov 30 13:57:50 shadow kernel: [    0.770339] Using IPI No-Shortcut mode
Nov 30 13:57:50 shadow kernel: [    0.770411] registered taskstats version 1
Nov 30 13:57:50 shadow kernel: [    0.770524]   Magic number: 1:108:990
Nov 30 13:57:50 shadow kernel: [    0.770627] rtc_cmos 00:08: setting system clock to 2009-11-30 13:57:21 UTC (1259589441)
Nov 30 13:57:50 shadow kernel: [    0.770632] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Nov 30 13:57:50 shadow kernel: [    0.770634] EDD information not available.
Nov 30 13:57:50 shadow kernel: [    0.801325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Nov 30 13:57:50 shadow kernel: [    0.920442] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33
Nov 30 13:57:50 shadow kernel: [    0.936347] ata5.00: configured for UDMA/33
Nov 30 13:57:50 shadow kernel: [    1.000045] Clocksource tsc unstable (delta = -122853785 ns)
Nov 30 13:57:50 shadow kernel: [    1.064065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 30 13:57:50 shadow kernel: [    1.064663] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Nov 30 13:57:50 shadow kernel: [    1.064817] ata1.00: ATA-8: FUJITSU MHW2080BH, 00000012, max UDMA/100
Nov 30 13:57:50 shadow kernel: [    1.064820] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
Nov 30 13:57:50 shadow kernel: [    1.065573] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Nov 30 13:57:50 shadow kernel: [    1.065730] ata1.00: configured for UDMA/100
Nov 30 13:57:50 shadow kernel: [    1.076366] ata3: SATA link down (SStatus 0 SControl 300)
Nov 30 13:57:50 shadow kernel: [    1.080165] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2080B 0000 PQ: 0 ANSI: 5
Nov 30 13:57:50 shadow kernel: [    1.080298] sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 30 13:57:50 shadow kernel: [    1.080341] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Nov 30 13:57:50 shadow kernel: [    1.080393] sd 0:0:0:0: [sda] Write Protect is off
Nov 30 13:57:50 shadow kernel: [    1.080422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 30 13:57:50 shadow kernel: [    1.080555]  sda:
Nov 30 13:57:50 shadow kernel: [    1.095830] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PW03 PQ: 0 ANSI: 5
Nov 30 13:57:50 shadow kernel: [    1.106785]  sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 30 13:57:50 shadow kernel: [    1.107527] Uniform CD-ROM driver Revision: 3.20
Nov 30 13:57:50 shadow kernel: [    1.107662] sr 4:0:0:0: Attached scsi generic sg1 type 5
Nov 30 13:57:50 shadow kernel: [    1.120133]  sda5
Nov 30 13:57:50 shadow kernel: [    1.132039] usb 1-3: new high speed USB device using ehci_hcd and address 3
Nov 30 13:57:50 shadow kernel: [    1.134150]  sda6 sda7 sda8 >
Nov 30 13:57:50 shadow kernel: [    1.172313] sd 0:0:0:0: [sda] Attached SCSI disk
Nov 30 13:57:50 shadow kernel: [    1.172329] Freeing unused kernel memory: 540k freed
Nov 30 13:57:50 shadow kernel: [    1.172644] Write protecting the kernel text: 4568k
Nov 30 13:57:50 shadow kernel: [    1.172681] Write protecting the kernel read-only data: 1836k
Nov 30 13:57:50 shadow kernel: [    1.269826] usb 1-3: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    1.330608] Linux agpgart interface v0.103
Nov 30 13:57:50 shadow kernel: [    1.334250] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
Nov 30 13:57:50 shadow kernel: [    1.334473] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Nov 30 13:57:50 shadow kernel: [    1.365871] acpi device:0a: registered as cooling_device1
Nov 30 13:57:50 shadow kernel: [    1.365995] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6
Nov 30 13:57:50 shadow kernel: [    1.366040] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
Nov 30 13:57:50 shadow kernel: [    1.399455] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Nov 30 13:57:50 shadow kernel: [    1.399490] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Nov 30 13:57:50 shadow kernel: [    1.402840] 8139too Fast Ethernet driver 0.9.28
Nov 30 13:57:50 shadow kernel: [    1.402881] 8139too 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 30 13:57:50 shadow kernel: [    1.403953] eth0: RealTek RTL8139 at 0x2000, 00:03:0d:5a:04:32, IRQ 16
Nov 30 13:57:50 shadow kernel: [    1.404307] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Nov 30 13:57:50 shadow kernel: [    1.508671] [drm] Initialized drm 1.1.0 20060810
Nov 30 13:57:50 shadow kernel: [    1.516118] usb 2-1: new low speed USB device using uhci_hcd and address 2
Nov 30 13:57:50 shadow kernel: [    1.523965] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 30 13:57:50 shadow kernel: [    2.036630] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:57:50 shadow kernel: [    2.164883] [drm] fb0: inteldrmfb frame buffer device
Nov 30 13:57:50 shadow kernel: [    2.164894] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Nov 30 13:57:50 shadow kernel: [    2.236069] [drm] LVDS-8: set mode 1440x900 17
Nov 30 13:57:50 shadow kernel: [    2.413932] usb 2-1: configuration #1 chosen from 1 choice
Nov 30 13:57:50 shadow kernel: [    2.423936] usbcore: registered new interface driver hiddev
Nov 30 13:57:50 shadow kernel: [    2.450391] Console: switching to colour frame buffer device 180x56
Nov 30 13:57:50 shadow kernel: [    2.460744] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
Nov 30 13:57:50 shadow kernel: [    2.460834] generic-usb 0003:04F3:0212.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
Nov 30 13:57:50 shadow kernel: [    2.460854] usbcore: registered new interface driver usbhid
Nov 30 13:57:50 shadow kernel: [    2.460857] usbhid: v2.6:USB HID core driver
Nov 30 13:57:50 shadow kernel: [    3.020032] PM: Starting manual resume from disk
Nov 30 13:57:50 shadow kernel: [    3.023339] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
Nov 30 13:57:50 shadow kernel: [    3.023344] EXT4-fs (sda5): write access will be enabled during recovery
Nov 30 13:57:50 shadow kernel: [    3.051640] EXT4-fs (sda5): barriers enabled
Nov 30 13:57:50 shadow kernel: [    4.930187] kjournald2 starting: pid 372, dev sda5:8, commit interval 5 seconds
Nov 30 13:57:50 shadow kernel: [    4.930210] EXT4-fs (sda5): delayed allocation enabled
Nov 30 13:57:50 shadow kernel: [    4.930214] EXT4-fs: file extents enabled
Nov 30 13:57:50 shadow kernel: [    4.932393] EXT4-fs: mballoc enabled
Nov 30 13:57:50 shadow kernel: [    4.932410] EXT4-fs (sda5): orphan cleanup on readonly fs
Nov 30 13:57:50 shadow kernel: [    4.932507] EXT4-fs (sda5): 2 orphan inodes deleted
Nov 30 13:57:50 shadow kernel: [    4.932511] EXT4-fs (sda5): recovery complete
Nov 30 13:57:50 shadow kernel: [    5.232532] EXT4-fs (sda5): mounted filesystem with ordered data mode
Nov 30 13:57:50 shadow kernel: [    5.890770] type=1505 audit(1259589446.619:2): operation="profile_load" pid=395 name=/usr/share/gdm/guest-session/Xsession
Nov 30 13:57:50 shadow kernel: [    5.893465] type=1505 audit(1259589446.621:3): operation="profile_load" pid=396 name=/sbin/dhclient3
Nov 30 13:57:50 shadow kernel: [    5.894166] type=1505 audit(1259589446.621:4): operation="profile_load" pid=396 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Nov 30 13:57:50 shadow kernel: [    5.894547] type=1505 audit(1259589446.621:5): operation="profile_load" pid=396 name=/usr/lib/connman/scripts/dhclient-script
Nov 30 13:57:50 shadow kernel: [    5.948577] type=1505 audit(1259589446.677:6): operation="profile_load" pid=397 name=/usr/bin/evince
Nov 30 13:57:50 shadow kernel: [    5.973422] type=1505 audit(1259589446.701:7): operation="profile_load" pid=397 name=/usr/bin/evince-previewer
Nov 30 13:57:50 shadow kernel: [    5.980267] type=1505 audit(1259589446.709:8): operation="profile_load" pid=397 name=/usr/bin/evince-thumbnailer
Nov 30 13:57:50 shadow kernel: [    6.015918] type=1505 audit(1259589446.741:9): operation="profile_load" pid=399 name=/usr/lib/cups/backend/cups-pdf
Nov 30 13:57:50 shadow kernel: [    6.016772] type=1505 audit(1259589446.745:10): operation="profile_load" pid=399 name=/usr/sbin/cupsd
Nov 30 13:57:50 shadow kernel: [    6.019566] type=1505 audit(1259589446.745:11): operation="profile_load" pid=400 name=/usr/sbin/tcpdump
Nov 30 13:57:50 shadow kernel: [    7.394740] Adding 2104472k swap on /dev/sda7.  Priority:-1 extents:1 across:2104472k 
Nov 30 13:57:50 shadow kernel: [    9.105979] EXT4-fs (sda5): internal journal on sda5:8
Nov 30 13:57:50 shadow kernel: [    9.782488] udev: starting version 147
Nov 30 13:57:50 shadow kernel: [   10.973876] intel_rng: FWH not detected
Nov 30 13:57:50 shadow kernel: [   10.973988] ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 30 13:57:50 shadow kernel: [   11.105518] lp: driver loaded but no devices found
Nov 30 13:57:50 shadow kernel: [   11.612427] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
Nov 30 13:57:50 shadow kernel: [   11.649706] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
Nov 30 13:57:50 shadow kernel: [   12.868111] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 30 13:57:50 shadow kernel: [   13.291645] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Nov 30 13:57:50 shadow kernel: [   13.291840] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Nov 30 13:57:50 shadow kernel: [   13.910444] nf_conntrack version 0.5.0 (16233 buckets, 64932 max)
Nov 30 13:57:50 shadow kernel: [   13.910671] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Nov 30 13:57:50 shadow kernel: [   13.910674] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Nov 30 13:57:50 shadow kernel: [   13.910677] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Nov 30 13:57:50 shadow kernel: [   28.397071] EXT4-fs (sda6): barriers enabled
Nov 30 13:57:50 shadow kernel: [   28.401612] kjournald2 starting: pid 816, dev sda6:8, commit interval 5 seconds
Nov 30 13:57:50 shadow kernel: [   28.522601] EXT4-fs (sda6): internal journal on sda6:8
Nov 30 13:57:50 shadow kernel: [   28.522606] EXT4-fs (sda6): delayed allocation enabled
Nov 30 13:57:50 shadow kernel: [   28.522610] EXT4-fs: file extents enabled
Nov 30 13:57:50 shadow kernel: [   28.523731] EXT4-fs: mballoc enabled
Nov 30 13:57:50 shadow kernel: [   28.523747] EXT4-fs (sda6): mounted filesystem with ordered data mode
Nov 30 13:57:50 shadow kernel: [   29.334375] type=1505 audit(1259585870.061:12): operation="profile_replace" pid=876 name=/usr/share/gdm/guest-session/Xsession
Nov 30 13:57:50 shadow kernel: [   29.336267] type=1505 audit(1259585870.065:13): operation="profile_replace" pid=877 name=/sbin/dhclient3
Nov 30 13:57:50 shadow kernel: [   29.337060] type=1505 audit(1259585870.065:14): operation="profile_replace" pid=877 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Nov 30 13:57:50 shadow kernel: [   29.337449] type=1505 audit(1259585870.065:15): operation="profile_replace" pid=877 name=/usr/lib/connman/scripts/dhclient-script
Nov 30 13:57:50 shadow kernel: [   29.342554] type=1505 audit(1259585870.069:16): operation="profile_replace" pid=879 name=/usr/bin/evince
Nov 30 13:57:50 shadow kernel: [   29.354226] type=1505 audit(1259585870.081:17): operation="profile_replace" pid=879 name=/usr/bin/evince-previewer
Nov 30 13:57:50 shadow kernel: [   29.361551] type=1505 audit(1259585870.089:18): operation="profile_replace" pid=879 name=/usr/bin/evince-thumbnailer
Nov 30 13:57:50 shadow kernel: [   29.370997] type=1505 audit(1259585870.097:19): operation="profile_replace" pid=881 name=/usr/lib/cups/backend/cups-pdf
Nov 30 13:57:50 shadow kernel: [   29.371827] type=1505 audit(1259585870.097:20): operation="profile_replace" pid=881 name=/usr/sbin/cupsd
Nov 30 13:57:50 shadow kernel: [   29.375023] type=1505 audit(1259585870.101:21): operation="profile_replace" pid=882 name=/usr/sbin/tcpdump
Nov 30 13:57:53 shadow kernel: [   32.836548] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Nov 30 13:57:57 shadow kernel: [   36.407707] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Nov 30 13:57:59 shadow kernel: [   39.109249] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:00 shadow kernel: [   39.293509] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:00 shadow kernel: [   39.674560] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:00 shadow kernel: [   39.860260] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:05 shadow kernel: [   44.623699] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:05 shadow kernel: [   44.766415] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:05 shadow kernel: [   45.047768] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:05 shadow kernel: [   45.191491] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:06 shadow kernel: [   45.499557] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:06 shadow kernel: [   45.643063] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:14 shadow kernel: [   53.807263] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:14 shadow kernel: [   53.957497] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:15 shadow kernel: [   54.293540] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:15 shadow kernel: [   54.443288] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:15 shadow kernel: [   54.749003] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:15 shadow kernel: [   54.896614] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:17 shadow kernel: [   56.344363] [drm] TV-14: set mode NTSC 480i 0
Nov 30 13:58:17 shadow kernel: [   56.488351] [drm] TV-14: set mode NTSC 480i 0

snoogy · Le 30/11/2009, à 15:07

et le dmesg:

[    0.101521] NetLabel:  unlabeled traffic allowed by default
[    0.101554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.101559] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.105681] pnp: PnP ACPI init
[    0.105702] ACPI: bus type pnp registered
[    0.105805] pnp: PnP ACPI: found 11 devices
[    0.105805] ACPI: ACPI bus type pnp unregistered
[    0.105805] PnPBIOS: Disabled by ACPI PNP
[    0.105805] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.105805] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.105805] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.105805] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.105805] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.105805] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.105805] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.105805] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.105805] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.105805] system 00:06: ioport range 0x200-0x20f has been reserved
[    0.105805] system 00:06: ioport range 0x680-0x69f has been reserved
[    0.105805] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.105805] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.105805] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.105805] system 00:06: ioport range 0x1640-0x164f has been reserved
[    0.105805] system 00:07: ioport range 0x6a0-0x6af has been reserved
[    0.105805] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[    0.142482] AppArmor: AppArmor Filesystem Enabled
[    0.142537] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.142541] pci 0000:00:1c.0:   IO window: 0xf000-0xffff
[    0.142548] pci 0000:00:1c.0:   MEM window: 0xfac00000-0xfebfffff
[    0.142554] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.142559] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.142562] pci 0000:00:1c.1:   IO window: disabled
[    0.142568] pci 0000:00:1c.1:   MEM window: disabled
[    0.142573] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.142578] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[    0.142581] pci 0000:00:1c.2:   IO window: disabled
[    0.142587] pci 0000:00:1c.2:   MEM window: 0xf7000000-0xf70fffff
[    0.142593] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.142598] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.142602] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.142609] pci 0000:00:1e.0:   MEM window: 0xf0200000-0xf02fffff
[    0.142614] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.142627] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.142634]   alloc irq_desc for 17 on node -1
[    0.142637]   alloc kstat_irqs on node -1
[    0.142643] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.142651] pci 0000:00:1c.0: setting latency timer to 64
[    0.142660]   alloc irq_desc for 16 on node -1
[    0.142662]   alloc kstat_irqs on node -1
[    0.142666] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.142673] pci 0000:00:1c.1: setting latency timer to 64
[    0.142682] pci 0000:00:1c.2: enabling device (0000 -> 0002)
[    0.142686]   alloc irq_desc for 18 on node -1
[    0.142688]   alloc kstat_irqs on node -1
[    0.142692] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.142699] pci 0000:00:1c.2: setting latency timer to 64
[    0.142707] pci 0000:00:1e.0: setting latency timer to 64
[    0.142713] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.142716] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.142720] pci_bus 0000:02: resource 0 io:  [0xf000-0xffff]
[    0.142723] pci_bus 0000:02: resource 1 mem: [0xfac00000-0xfebfffff]
[    0.142726] pci_bus 0000:05: resource 1 mem: [0xf7000000-0xf70fffff]
[    0.142729] pci_bus 0000:06: resource 0 io:  [0x2000-0x2fff]
[    0.142732] pci_bus 0000:06: resource 1 mem: [0xf0200000-0xf02fffff]
[    0.142735] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.142738] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.142778] NET: Registered protocol family 2
[    0.142880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.143198] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.143909] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.144291] TCP: Hash tables configured (established 131072 bind 65536)
[    0.144295] TCP reno registered
[    0.144419] NET: Registered protocol family 1
[    0.144493] Trying to unpack rootfs image as initramfs...
[    0.363045] Freeing initrd memory: 7464k freed
[    0.368042] Simple Boot Flag at 0x35 set to 0x1
[    0.368174] cpufreq-nforce2: No nForce2 chipset.
[    0.368217] Scanning for low memory corruption every 60 seconds
[    0.368337] audit: initializing netlink socket (disabled)
[    0.368356] type=2000 audit(1259589440.367:1): initialized
[    0.377701] highmem bounce pool size: 64 pages
[    0.377708] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.379226] VFS: Disk quotas dquot_6.5.2
[    0.379286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.379867] fuse init (API version 7.12)
[    0.379953] msgmni has been set to 1732
[    0.380174] alg: No test for stdrng (krng)
[    0.380187] io scheduler noop registered
[    0.380190] io scheduler anticipatory registered
[    0.380192] io scheduler deadline registered
[    0.380239] io scheduler cfq registered (default)
[    0.380254] pci 0000:00:02.0: Boot video device
[    0.380482]   alloc irq_desc for 24 on node -1
[    0.380484]   alloc kstat_irqs on node -1
[    0.380497] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.380510] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.380670]   alloc irq_desc for 25 on node -1
[    0.380672]   alloc kstat_irqs on node -1
[    0.380681] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.380692] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.380852]   alloc irq_desc for 26 on node -1
[    0.380855]   alloc kstat_irqs on node -1
[    0.380863] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.380874] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.380981] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.381085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.381517] ACPI: AC Adapter [AC0] (on-line)
[    0.381605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.381610] ACPI: Power Button [PWRF]
[    0.381662] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.381701] ACPI: Lid Switch [LID0]
[    0.381749] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.381752] ACPI: Power Button [PWRB]
[    0.381801] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.381804] ACPI: Sleep Button [SLPB]
[    0.382525] Marking TSC unstable due to TSC halts in idle
[    0.382563] Switched to high resolution mode on CPU 0
[    0.382583] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.382610] processor LNXCPU:00: registered as cooling_device0
[    0.382614] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.384903] thermal LNXTHERM:01: registered as thermal_zone0
[    0.384912] ACPI: Thermal Zone [THRM] (65 C)
[    0.384966] isapnp: Scanning for PnP cards...
[    0.739428] isapnp: No Plug & Play device found
[    0.743068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.744446] brd: module loaded
[    0.744903] loop: module loaded
[    0.744985] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.745068] ahci 0000:00:1f.2: version 3.0
[    0.745086]   alloc irq_desc for 19 on node -1
[    0.745088]   alloc kstat_irqs on node -1
[    0.745097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.745132]   alloc irq_desc for 27 on node -1
[    0.745134]   alloc kstat_irqs on node -1
[    0.745144] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    0.745231] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    0.745235] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    0.745241] ahci 0000:00:1f.2: setting latency timer to 64
[    0.745461] scsi0 : ahci
[    0.745594] scsi1 : ahci
[    0.745657] scsi2 : ahci
[    0.745766] scsi3 : ahci
[    0.745909] ata1: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004500 irq 27
[    0.745912] ata2: DUMMY
[    0.745916] ata3: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004600 irq 27
[    0.745918] ata4: DUMMY
[    0.745967] ata_piix 0000:00:1f.1: version 2.13
[    0.745978] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.746018] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.746102] scsi4 : ata_piix
[    0.746274] scsi5 : ata_piix
[    0.746860] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.746863] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.747705] Fixed MDIO Bus: probed
[    0.747744] PPP generic driver version 2.4.2
[    0.747852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.747877]   alloc irq_desc for 23 on node -1
[    0.747880]   alloc kstat_irqs on node -1
[    0.747887] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.747904] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.747908] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.747970] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.751882] ehci_hcd 0000:00:1d.7: debug port 1
[    0.751890] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.752061] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
[    0.756454] ata6: port disabled. ignoring.
[    0.759136] ACPI: Battery Slot [BAT0] (battery present)
[    0.764016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.764114] usb usb1: configuration #1 chosen from 1 choice
[    0.764146] hub 1-0:1.0: USB hub found
[    0.764155] hub 1-0:1.0: 8 ports detected
[    0.764231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.764251] uhci_hcd: USB Universal Host Controller Interface driver
[    0.764293] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.764302] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.764306] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.764346] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.764376] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.764457] usb usb2: configuration #1 chosen from 1 choice
[    0.764483] hub 2-0:1.0: USB hub found
[    0.764491] hub 2-0:1.0: 2 ports detected
[    0.764538] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.764545] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.764549] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.764586] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.764624] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.764702] usb usb3: configuration #1 chosen from 1 choice
[    0.764728] hub 3-0:1.0: USB hub found
[    0.764736] hub 3-0:1.0: 2 ports detected
[    0.764783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.764791] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.764795] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.764825] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.764860] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.764940] usb usb4: configuration #1 chosen from 1 choice
[    0.764966] hub 4-0:1.0: USB hub found
[    0.764973] hub 4-0:1.0: 2 ports detected
[    0.765024] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.765031] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.765035] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.765065] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.765102] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.765180] usb usb5: configuration #1 chosen from 1 choice
[    0.765207] hub 5-0:1.0: USB hub found
[    0.765214] hub 5-0:1.0: 2 ports detected
[    0.765323] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.767552] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.768834] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.768840] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.768844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.768847] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.768850] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.768913] mice: PS/2 mouse device common for all mice
[    0.769083] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    0.769116] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.769232] device-mapper: uevent: version 1.0.3
[    0.769335] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.769421] device-mapper: multipath: version 1.1.0 loaded
[    0.769424] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.769547] EISA: Probing bus 0 at eisa.0
[    0.769554] Cannot allocate resource for EISA slot 1
[    0.769557] Cannot allocate resource for EISA slot 2
[    0.769583] EISA: Detected 0 cards.
[    0.769668] cpuidle: using governor ladder
[    0.769733] cpuidle: using governor menu
[    0.770239] TCP cubic registered
[    0.770242] IPv6: Loaded, but administratively disabled, reboot required to enable
[    0.770246] NET: Registered protocol family 17
[    0.770266] Bluetooth: L2CAP ver 2.13
[    0.770267] Bluetooth: L2CAP socket layer initialized
[    0.770270] Bluetooth: SCO (Voice Link) ver 0.6
[    0.770272] Bluetooth: SCO socket layer initialized
[    0.770302] Bluetooth: RFCOMM TTY layer initialized
[    0.770305] Bluetooth: RFCOMM socket layer initialized
[    0.770307] Bluetooth: RFCOMM ver 1.11
[    0.770339] Using IPI No-Shortcut mode
[    0.770399] PM: Resume from disk failed.
[    0.770411] registered taskstats version 1
[    0.770524]   Magic number: 1:108:990
[    0.770627] rtc_cmos 00:08: setting system clock to 2009-11-30 13:57:21 UTC (1259589441)
[    0.770632] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.770634] EDD information not available.
[    0.801325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.920442] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33
[    0.936347] ata5.00: configured for UDMA/33
[    1.000045] Clocksource tsc unstable (delta = -122853785 ns)
[    1.064065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.064663] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.064817] ata1.00: ATA-8: FUJITSU MHW2080BH, 00000012, max UDMA/100
[    1.064820] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.065573] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.065730] ata1.00: configured for UDMA/100
[    1.076366] ata3: SATA link down (SStatus 0 SControl 300)
[    1.080165] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2080B 0000 PQ: 0 ANSI: 5
[    1.080298] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.080341] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.080393] sd 0:0:0:0: [sda] Write Protect is off
[    1.080396] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.080422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.080555]  sda:
[    1.095830] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PW03 PQ: 0 ANSI: 5
[    1.106785]  sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.107527] Uniform CD-ROM driver Revision: 3.20
[    1.107614] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.107662] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.120133]  sda5
[    1.132039] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    1.134150]  sda6 sda7 sda8 >
[    1.172313] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.172329] Freeing unused kernel memory: 540k freed
[    1.172644] Write protecting the kernel text: 4568k
[    1.172681] Write protecting the kernel read-only data: 1836k
[    1.269826] usb 1-3: configuration #1 chosen from 1 choice
[    1.330608] Linux agpgart interface v0.103
[    1.334250] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.334473] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.365871] acpi device:0a: registered as cooling_device1
[    1.365995] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6
[    1.366040] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[    1.399455] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.399490] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.402840] 8139too Fast Ethernet driver 0.9.28
[    1.402881] 8139too 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.403953] eth0: RealTek RTL8139 at 0x2000, 00:03:0d:5a:04:32, IRQ 16
[    1.404307] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.508671] [drm] Initialized drm 1.1.0 20060810
[    1.516118] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.523965] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.523972] i915 0000:00:02.0: setting latency timer to 64
[    2.036630] [drm] TV-14: set mode NTSC 480i 0
[    2.164883] [drm] fb0: inteldrmfb frame buffer device
[    2.164894] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.236069] [drm] LVDS-8: set mode 1440x900 17
[    2.413932] usb 2-1: configuration #1 chosen from 1 choice
[    2.423936] usbcore: registered new interface driver hiddev
[    2.450391] Console: switching to colour frame buffer device 180x56
[    2.460744] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[    2.460834] generic-usb 0003:04F3:0212.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[    2.460854] usbcore: registered new interface driver usbhid
[    2.460857] usbhid: v2.6:USB HID core driver
[    3.020032] PM: Starting manual resume from disk
[    3.020036] PM: Resume from partition 8:7
[    3.020038] PM: Checking hibernation image.
[    3.020241] PM: Resume from disk failed.
[    3.023339] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    3.023344] EXT4-fs (sda5): write access will be enabled during recovery
[    3.051640] EXT4-fs (sda5): barriers enabled
[    4.930187] kjournald2 starting: pid 372, dev sda5:8, commit interval 5 seconds
[    4.930210] EXT4-fs (sda5): delayed allocation enabled
[    4.930214] EXT4-fs: file extents enabled
[    4.932393] EXT4-fs: mballoc enabled
[    4.932410] EXT4-fs (sda5): orphan cleanup on readonly fs
[    4.932419] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2560
[    4.932493] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1217
[    4.932507] EXT4-fs (sda5): 2 orphan inodes deleted
[    4.932511] EXT4-fs (sda5): recovery complete
[    5.232532] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    5.890770] type=1505 audit(1259589446.619:2): operation="profile_load" pid=395 name=/usr/share/gdm/guest-session/Xsession
[    5.893465] type=1505 audit(1259589446.621:3): operation="profile_load" pid=396 name=/sbin/dhclient3
[    5.894166] type=1505 audit(1259589446.621:4): operation="profile_load" pid=396 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    5.894547] type=1505 audit(1259589446.621:5): operation="profile_load" pid=396 name=/usr/lib/connman/scripts/dhclient-script
[    5.948577] type=1505 audit(1259589446.677:6): operation="profile_load" pid=397 name=/usr/bin/evince
[    5.973422] type=1505 audit(1259589446.701:7): operation="profile_load" pid=397 name=/usr/bin/evince-previewer
[    5.980267] type=1505 audit(1259589446.709:8): operation="profile_load" pid=397 name=/usr/bin/evince-thumbnailer
[    6.015918] type=1505 audit(1259589446.741:9): operation="profile_load" pid=399 name=/usr/lib/cups/backend/cups-pdf
[    6.016772] type=1505 audit(1259589446.745:10): operation="profile_load" pid=399 name=/usr/sbin/cupsd
[    6.019566] type=1505 audit(1259589446.745:11): operation="profile_load" pid=400 name=/usr/sbin/tcpdump
[    7.394740] Adding 2104472k swap on /dev/sda7.  Priority:-1 extents:1 across:2104472k 
[    9.105979] EXT4-fs (sda5): internal journal on sda5:8
[    9.782488] udev: starting version 147
[   10.973876] intel_rng: FWH not detected
[   10.973988] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.105518] lp: driver loaded but no devices found
[   11.612427] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
[   11.649706] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   12.868098]   alloc irq_desc for 22 on node -1
[   12.868103]   alloc kstat_irqs on node -1
[   12.868111] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.868155] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.291645] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   13.291840] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   13.910444] nf_conntrack version 0.5.0 (16233 buckets, 64932 max)
[   13.910671] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   13.910674] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   13.910677] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   28.397071] EXT4-fs (sda6): barriers enabled
[   28.401612] kjournald2 starting: pid 816, dev sda6:8, commit interval 5 seconds
[   28.522601] EXT4-fs (sda6): internal journal on sda6:8
[   28.522606] EXT4-fs (sda6): delayed allocation enabled
[   28.522610] EXT4-fs: file extents enabled
[   28.523731] EXT4-fs: mballoc enabled
[   28.523747] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   29.334375] type=1505 audit(1259585870.061:12): operation="profile_replace" pid=876 name=/usr/share/gdm/guest-session/Xsession
[   29.336267] type=1505 audit(1259585870.065:13): operation="profile_replace" pid=877 name=/sbin/dhclient3
[   29.337060] type=1505 audit(1259585870.065:14): operation="profile_replace" pid=877 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   29.337449] type=1505 audit(1259585870.065:15): operation="profile_replace" pid=877 name=/usr/lib/connman/scripts/dhclient-script
[   29.342554] type=1505 audit(1259585870.069:16): operation="profile_replace" pid=879 name=/usr/bin/evince
[   29.354226] type=1505 audit(1259585870.081:17): operation="profile_replace" pid=879 name=/usr/bin/evince-previewer
[   29.361551] type=1505 audit(1259585870.089:18): operation="profile_replace" pid=879 name=/usr/bin/evince-thumbnailer
[   29.370997] type=1505 audit(1259585870.097:19): operation="profile_replace" pid=881 name=/usr/lib/cups/backend/cups-pdf
[   29.371827] type=1505 audit(1259585870.097:20): operation="profile_replace" pid=881 name=/usr/sbin/cupsd
[   29.375023] type=1505 audit(1259585870.101:21): operation="profile_replace" pid=882 name=/usr/sbin/tcpdump
[   32.836436] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   32.836440] vboxdrv: Successfully done.
[   32.836442] vboxdrv: Found 1 processor cores.
[   32.836548] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   32.836551] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
[   36.407707] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   39.109249] [drm] TV-14: set mode NTSC 480i 0
[   39.293509] [drm] TV-14: set mode NTSC 480i 0
[   39.674560] [drm] TV-14: set mode NTSC 480i 0
[   39.860260] [drm] TV-14: set mode NTSC 480i 0
[   44.623699] [drm] TV-14: set mode NTSC 480i 0
[   44.766415] [drm] TV-14: set mode NTSC 480i 0
[   45.047768] [drm] TV-14: set mode NTSC 480i 0
[   45.191491] [drm] TV-14: set mode NTSC 480i 0
[   45.499557] [drm] TV-14: set mode NTSC 480i 0
[   45.643063] [drm] TV-14: set mode NTSC 480i 0
[   53.807263] [drm] TV-14: set mode NTSC 480i 0
[   53.957497] [drm] TV-14: set mode NTSC 480i 0
[   54.293540] [drm] TV-14: set mode NTSC 480i 0
[   54.443288] [drm] TV-14: set mode NTSC 480i 0
[   54.749003] [drm] TV-14: set mode NTSC 480i 0
[   54.896614] [drm] TV-14: set mode NTSC 480i 0
[   56.344363] [drm] TV-14: set mode NTSC 480i 0
[   56.488351] [drm] TV-14: set mode NTSC 480i 0

Je n'y est rien trouver de particulier ...

Jos31 · Le 30/11/2009, à 15:41

Hum en effet rien dans les logs
Sinon petite question au passage, tu es en 64bits ou 32bits?

snoogy · Le 30/11/2009, à 15:44

je suis en 32bits, en ce moment je cherche a trouver tout ce qui a changer sur karmic depuis jaunty.. pour le moment mes seul piste sont le bluetooth et le noyau

Jos31 · Le 30/11/2009, à 15:50

Perso je pencherai pour le noyau mais bon.
Essaye peut etre d'installer un noyau de jaunty. Pour cela récupere ce fichier (sur ton bureau par exemple) et installe le (double clic)

Ensuite au démarrage dans le menu grub, sélectionne l'entrée 2.6.28.

Si tu a le moindre probleme (genre impossible de booter), choisis au démarrage le kernel 2.6.31. On pourra aussi supprimer le kernel 2.6.28 utltérieurement en cas de soucis.

snoogy · Le 30/11/2009, à 15:53

est ce que la deinstallation de ce noyau se feras proprement ?

ou il resteras toujours des traces..?

parce que j'ai pas envie de rentre mon système instable.. dans ce cas je fait une sauvegarde des partition avant..

Dernière modification par snoogy (Le 30/11/2009, à 15:56)

Jos31 · Le 30/11/2009, à 15:56

Normalement ca se fera proprement ne t'en fait pas.
Il devrait meme te supprimer l'entrée dans grub une fois supprimé

La commande pour le supprimer devrait etre la suivante:

sudo apt-get remove linux-image-2.6.28-16-generic

Ce n'est pas une compilation du noyau, c'est l'installation d'un noyau tel que la distribution le fait lorsque tu reçoit des mises a jours. La seule différence est qu'on installe un noyau de la distribution précédente.

Dernière modification par Jos31 (Le 30/11/2009, à 15:59)

snoogy · Le 30/11/2009, à 15:58

ça ne risque pas de rendre certaine chose incompatible voir instable ? j'hésite in peu la...

Jos31 · Le 30/11/2009, à 16:00

Ben ca peut ne pas marcher, mais ca ne devrais pas t'empêcher de choisir de nouveau un noyau 2.6.31 dans grub au démarrage.

C'est toi qui voit, si ca te tente pas de tester pas de soucis c'est ton install et ca peut se comprendre

Dernière modification par Jos31 (Le 30/11/2009, à 16:01)

snoogy · Le 30/11/2009, à 16:06

j'ai juste peur de détraquer mon système.. je l'aime bien mon Ubuntu et j'y est passer beaucoups de temps a le personnaliser...

Bon je tente le coup tout de même, je lance l'installation du noyau

snoogy · Le 30/11/2009, à 16:16

je vient de voir sa dans le fichier .deb

You likely do not want to install this package directly. Instead, install the linux-generic meta-package, which will ensure that upgrades work correctly, and that supporting packages are also installed.

Et en recherchant dans synaptic "linux-generic meta-package" je suis tomber sur "linux-backports-modules" et "linux-backports-modules-karmic-

Peut etre en les installant... sa pourrai fonctionner ?? parce que:

Dert Ung a écrit :

J'ai jeté un coup d'oeil sur launchpad, concernant le freeze modprobe. Certains disent avoir activer les dépots backports et mettre à jour pour régler le problème.

peut être une piste ?

Jos31 · Le 30/11/2009, à 16:20

Tu peux essayer d'installer les backports si tu veux oui.

Si ca ne marche pas et que tu tente le 2.6.28, pour le message il t'avertit juste que tu va installer une version spécifique d'un kernel, au lieu du métapaquet linux-generic, ce qui est normal car le méta paquet linux-generic dans karmic pointe vers le kernel 2.6.31

Dernière modification par Jos31 (Le 30/11/2009, à 16:21)

snoogy · Le 30/11/2009, à 16:58

Les backports n'ont pas aider... j'ai donc installer le noyau et redémarrer dessus.

Ensuite j'ai verifier avec ndiswrapper -l si le pilote etait encore la
puis j'ai fait un depmod -a suivi de modprobe ndiswrapper et la surprise pas de plantage

je regarde dans les connexions réseau.. toujours pas de wifi.. je redémarre l'ordinateur..toujours sur ce noyau.. et je fait:

ndiwrapper -r sis163u pour enlever le driver
et je le réinstalle avec ndiswrapper -i .....
ensuite je fait un ndiswrapper -l est la surprise: driver présent mais aucune ligne sur le matériel..
donc je continue tout de meme avec depmod -a et modprobe ndiswrapper qui fait a nouveau tout planter j'ai ressayer 2 fois et ca plante a chaque fois...

Jos31 · Le 30/11/2009, à 17:01

Bon ben la désolé je sèche
Tu peux supprimer le kernel 2.6.28 si tu veux si ca ne marche pas mieux

snoogy · Le 30/11/2009, à 17:11

ok je le supprime, en plus j'ai remarquer des ralentissement avec ce noyau..

Merci pour ton aide je pense que ça ne seras malheureusement jamais résolu..

Je vais me faire une 2eme partition avec ubuntu 9.04 qui me servira que en déplacement pour le wifi en attendant de trouver une solution..

Edit: pour supprimer le noyau je démarre sur lequelle ?

Dernière modification par snoogy (Le 30/11/2009, à 17:12)

Jos31 · Le 30/11/2009, à 17:17

snoogy a écrit :

Edit: pour supprimer le noyau je démarre sur lequelle ?

Démarre sur le 2.6.31 puis lance la commande remove que je t'ai donné

snoogy · Le 30/11/2009, à 17:24

Merci, la suppression c'est bien passer

Dert Ung · Le 30/11/2009, à 17:27

ndiswrapper-modules

donne quoi?

snoogy · Le 30/11/2009, à 17:31

Impossible de trouver le paquet "ndiswrapper-modules"

Dert Ung · Le 30/11/2009, à 17:36

lsmod | grep sis163u

Pour voir si le driver est chargé.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#101 Le 30/11/2009, à 13:41

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#102 Le 30/11/2009, à 13:44

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#103 Le 30/11/2009, à 13:52

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#104 Le 30/11/2009, à 13:59

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#105 Le 30/11/2009, à 14:46

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#106 Le 30/11/2009, à 15:06

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#107 Le 30/11/2009, à 15:07

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#108 Le 30/11/2009, à 15:41

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#109 Le 30/11/2009, à 15:44

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#110 Le 30/11/2009, à 15:50

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#111 Le 30/11/2009, à 15:53

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#112 Le 30/11/2009, à 15:56

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#113 Le 30/11/2009, à 15:58

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#114 Le 30/11/2009, à 16:00

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#115 Le 30/11/2009, à 16:06

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#116 Le 30/11/2009, à 16:16

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#117 Le 30/11/2009, à 16:20

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#118 Le 30/11/2009, à 16:58

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#119 Le 30/11/2009, à 17:01

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#120 Le 30/11/2009, à 17:11

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#121 Le 30/11/2009, à 17:17

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#122 Le 30/11/2009, à 17:24

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#123 Le 30/11/2009, à 17:27

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#124 Le 30/11/2009, à 17:31

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

#125 Le 30/11/2009, à 17:36

Re : ->Wifi sys163u. modprobe ndiswrapper freeze[impossible a résoudre?]<-

Pied de page des forums