Ubuntu-fr

tnntwister

[résolu] Crash kernel quand mise à jour

Bonjour,

J'ai installé via wubi une ubuntu 9.10, qui tournait sans souci jusqu'à ce que je fasse les mises à jour proposées. Là quand je redémarre, j'ai un kernel panic avec la nouvelle version, et un plantage simple avec le safe mode. Par contre, tout va bien avec la première version du noyau installé.

uname -a
Linux ubuntu 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64 GNU/Linux

la mise à jour me propulse en 2.6.31-20 je crois.

Je vous posterai bien des logs, mais je ne sais pas lesquels correspondent au démarrage

Je peux faire quelque chose pour réparer la version mise à jour ?

merci,

Dernière modification par tnntwister (Le 25/03/2010, à 13:46)

tnntwister

Re : [résolu] Crash kernel quand mise à jour

J'ai cherché comment obtenir les logs intéressants, voici le résultat du dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=/dev/sda2 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[    0.000000]  BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffae000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 000000000 mask F00000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009b000 (usable)
[    0.000000]  modified: 000000000009b000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cffa0000 (usable)
[    0.000000]  modified: 00000000cffa0000 - 00000000cffae000 (ACPI data)
[    0.000000]  modified: 00000000cffae000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  modified: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000cffa0000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cffa0000 page 4k
[    0.000000] kernel direct mapping tables up to cffa0000 @ 10000-16000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
[    0.000000] RAMDISK: 3782d000 - 37fef04c
[    0.000000] ACPI: RSDP 00000000000fc440 00014 (v00 HPQOEM)
[    0.000000] ACPI: RSDT 00000000cffa0000 00044 (v01 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cffa0200 00084 (v02 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cffa0440 04E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cffae000 00040
[    0.000000] ACPI: APIC 00000000cffa0390 0006C (v01 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cffa0400 0003C (v01 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cffae040 00072 (v01 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cffa52e0 00038 (v01 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000cffae0c0 02024 (v01 HPQOEM SLIC-CPC 20081107 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000cffb00f0 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[    0.000000] ACPI: SSDT 00000000cffb0b90 0082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000130000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [0000000000015000 - 0000000000019fff]
[    0.000000]   bootmap [000000000001a000 -  000000000003ffff] pages 26
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00019e2ccc]    TEXT DATA BSS ==> [0001000000 - 00019e2ccc]
[    0.000000]   #3 [003782d000 - 0037fef04c]          RAMDISK ==> [003782d000 - 0037fef04c]
[    0.000000]   #4 [000009b000 - 0000100000]    BIOS reserved ==> [000009b000 - 0000100000]
[    0.000000]   #5 [00019e3000 - 00019e37cc]              BRK ==> [00019e3000 - 00019e37cc]
[    0.000000]   #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
[    0.000000]   #7 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000cffa0
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 1048363
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 109 pages reserved
[    0.000000]   DMA zone: 3814 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833496 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000
[    0.000000] PM: Registered nosave memory: 00000000cffae000 - 00000000cffe0000
[    0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031230
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=/dev/sda2 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.000000] Memory: 4049312k/4980736k available (5313k kernel code, 787284k absent, 144140k reserved, 3011k data, 660k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2400.177 MHz processor.
[    0.000795] Console: colour VGA+ 80x25
[    0.000798] console [tty0] enabled
[    0.010000] allocated 41943040 bytes of page_cgroup
[    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.010000] hpet clockevent registered
[    0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.35 BogoMIPS (lpj=24001770)
[    0.010000] Security Framework initialized
[    0.010000] AppArmor: AppArmor initialized
[    0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010000] Mount-cache hash table entries: 256
[    0.010000] Initializing cgroup subsys ns
[    0.010000] Initializing cgroup subsys cpuacct
[    0.010000] Initializing cgroup subsys memory
[    0.010000] Initializing cgroup subsys freezer
[    0.010000] Initializing cgroup subsys net_cls
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 1024K
[    0.010000] CPU 0/0x0 -> Node 0
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 0
[    0.010000] mce: CPU supports 6 MCE banks
[    0.010000] CPU0: Thermal monitoring enabled (TM2)
[    0.010000] using mwait in idle threads.
[    0.010000] Performance Counters: Core2 events, Intel PMU driver.
[    0.010000] ... version:                 2
[    0.010000] ... bit width:               40
[    0.010000] ... generic counters:        2
[    0.010000] ... value mask:              000000ffffffffff
[    0.010000] ... max period:              000000007fffffff
[    0.010000] ... fixed-purpose counters:  3
[    0.010000] ... counter mask:            0000000700000003
[    0.010000] ACPI: Core revision 20090521
[    0.020054] Setting APIC routing to flat
[    0.020411] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.135749] CPU0: Intel(R) Pentium(R) Dual  CPU  E2220  @ 2.40GHz stepping 0d
[    0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.010000] Initializing CPU#1
[    0.010000] Calibrating delay using timer specific routine.. 4799.92 BogoMIPS (lpj=23999642)
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 1024K
[    0.010000] CPU 1/0x1 -> Node 0
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 1
[    0.010000] mce: CPU supports 6 MCE banks
[    0.010000] CPU1: Thermal monitoring enabled (TM2)
[    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.291207] CPU1: Intel(R) Pentium(R) Dual  CPU  E2220  @ 2.40GHz stepping 0d
[    0.291216] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.300022] Brought up 2 CPUs
[    0.300025] Total of 2 processors activated (9600.28 BogoMIPS).
[    0.300083] CPU0 attaching sched-domain:
[    0.300085]  domain 0: span 0-1 level MC
[    0.300088]   groups: 0 1
[    0.300092] CPU1 attaching sched-domain:
[    0.300094]  domain 0: span 0-1 level MC
[    0.300096]   groups: 1 0
[    0.300162] Booting paravirtualized kernel on bare hardware
[    0.300162] regulator: core version 0.5
[    0.300162] Time: 13:41:31  Date: 03/23/10
[    0.300162] NET: Registered protocol family 16
[    0.300196] ACPI: bus type pci registered
[    0.300259] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.300262] PCI: Not using MMCONFIG.
[    0.300263] PCI: Using configuration type 1 for base access
[    0.301004] bio: create slab <bio-0> at 0
[    0.301004] ACPI: EC: Look up EC in DSDT
[    0.306690] ACPI: Interpreter enabled
[    0.306693] ACPI: (supports S0 S1 S3 S4 S5)
[    0.306714] ACPI: Using IOAPIC for interrupt routing
[    0.306760] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.311375] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.317477] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.324140] ACPI: No dock devices found.
[    0.324276] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.324376] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.324379] pci 0000:00:01.0: PME# disabled
[    0.324464] pci 0000:00:1a.0: reg 20 io port: [0xb400-0xb41f]
[    0.324545] pci 0000:00:1a.1: reg 20 io port: [0xb480-0xb49f]
[    0.324626] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8fec00-0xfe8fefff]
[    0.324683] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.324688] pci 0000:00:1a.7: PME# disabled
[    0.324734] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
[    0.324785] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.324789] pci 0000:00:1b.0: PME# disabled
[    0.324860] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.324864] pci 0000:00:1c.0: PME# disabled
[    0.324942] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.324946] pci 0000:00:1c.2: PME# disabled
[    0.325014] pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f]
[    0.325092] pci 0000:00:1d.1: reg 20 io port: [0xb880-0xb89f]
[    0.325171] pci 0000:00:1d.2: reg 20 io port: [0xbc00-0xbc1f]
[    0.325250] pci 0000:00:1d.3: reg 20 io port: [0xc000-0xc01f]
[    0.325328] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8ff800-0xfe8ffbff]
[    0.325385] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.325389] pci 0000:00:1d.7: PME# disabled
[    0.325522] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.325525] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.325528] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.325605] pci 0000:00:1f.2: reg 10 io port: [0xc880-0xc887]
[    0.325611] pci 0000:00:1f.2: reg 14 io port: [0xc800-0xc803]
[    0.325618] pci 0000:00:1f.2: reg 18 io port: [0xc480-0xc487]
[    0.325624] pci 0000:00:1f.2: reg 1c io port: [0xc400-0xc403]
[    0.325631] pci 0000:00:1f.2: reg 20 io port: [0xc080-0xc09f]
[    0.325638] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe8ff000-0xfe8ff7ff]
[    0.325677] pci 0000:00:1f.2: PME# supported from D3hot
[    0.325681] pci 0000:00:1f.2: PME# disabled
[    0.325716] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8ffc00-0xfe8ffcff]
[    0.325732] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.325783] pci 0000:04:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[    0.325792] pci 0000:04:00.0: reg 18 64bit mmio: [0xfeae0000-0xfeaeffff]
[    0.325797] pci 0000:04:00.0: reg 20 io port: [0xd000-0xd0ff]
[    0.325805] pci 0000:04:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
[    0.325823] pci 0000:04:00.0: supports D1 D2
[    0.325853] pci 0000:04:00.1: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
[    0.325887] pci 0000:04:00.1: supports D1 D2
[    0.325942] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.325944] pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.325948] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.326148] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]
[    0.326218] pci 0000:02:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[    0.326268] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdff0000-0xfdffffff]
[    0.326294] pci 0000:02:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.326445] pci 0000:02:00.0: supports D1 D2
[    0.326447] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.326461] pci 0000:02:00.0: PME# disabled
[    0.326580] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff]
[    0.326584] pci 0000:00:1c.2: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.326591] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[    0.326633] pci 0000:01:05.0: reg 10 32bit mmio: [0xfe9ff000-0xfe9fffff]
[    0.326681] pci 0000:01:05.0: supports D1 D2
[    0.326683] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[    0.326687] pci 0000:01:05.0: PME# disabled
[    0.326728] pci 0000:00:1e.0: transparent bridge
[    0.326734] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.326761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.326871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.326960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.327009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.337919] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.338017] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.338111] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.338204] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.338297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.338391] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.338484] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.338577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.338749] SCSI subsystem initialized
[    0.338796] libata version 3.00 loaded.
[    0.338796] usbcore: registered new interface driver usbfs
[    0.338796] usbcore: registered new interface driver hub
[    0.338796] usbcore: registered new device driver usb
[    0.338796] ACPI: WMI: Mapper loaded
[    0.338796] PCI: Using ACPI for IRQ routing
[    0.360011] Bluetooth: Core ver 2.15
[    0.360036] NET: Registered protocol family 31
[    0.360036] Bluetooth: HCI device and connection manager initialized
[    0.360036] Bluetooth: HCI socket layer initialized
[    0.360036] NetLabel: Initializing
[    0.360036] NetLabel:  domain hash size = 128
[    0.360036] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.360054] NetLabel:  unlabeled traffic allowed by default
[    0.360127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.360132] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.400058] pnp: PnP ACPI init
[    0.400086] ACPI: bus type pnp registered
[    0.402212] pnp: PnP ACPI: found 15 devices
[    0.402214] ACPI: ACPI bus type pnp unregistered
[    0.402225] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.402232] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.402235] system 00:06: ioport range 0x800-0x87f has been reserved
[    0.402237] system 00:06: ioport range 0x480-0x4bf has been reserved
[    0.402240] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.402242] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.402247] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.402250] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.402255] system 00:0a: ioport range 0xa00-0xadf has been reserved
[    0.402263] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[    0.402267] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.402272] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.402274] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[    0.402277] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.402279] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[    0.406948] AppArmor: AppArmor Filesystem Enabled
[    0.406996] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
[    0.406999] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.407003] pci 0000:00:01.0:   MEM window: 0xfea00000-0xfeafffff
[    0.407006] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.407010] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[    0.407012] pci 0000:00:1c.0:   IO window: disabled
[    0.407017] pci 0000:00:1c.0:   MEM window: disabled
[    0.407021] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.407025] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[    0.407028] pci 0000:00:1c.2:   IO window: 0xe000-0xefff
[    0.407033] pci 0000:00:1c.2:   MEM window: 0xfeb00000-0xfebfffff
[    0.407037] pci 0000:00:1c.2:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[    0.407044] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.407046] pci 0000:00:1e.0:   IO window: disabled
[    0.407051] pci 0000:00:1e.0:   MEM window: 0xfe900000-0xfe9fffff
[    0.407055] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.407066]   alloc irq_desc for 16 on node 0
[    0.407068]   alloc kstat_irqs on node 0
[    0.407072] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.407076] pci 0000:00:01.0: setting latency timer to 64
[    0.407083]   alloc irq_desc for 17 on node 0
[    0.407084]   alloc kstat_irqs on node 0
[    0.407087] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.407091] pci 0000:00:1c.0: setting latency timer to 64
[    0.407098]   alloc irq_desc for 18 on node 0
[    0.407100]   alloc kstat_irqs on node 0
[    0.407102] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.407107] pci 0000:00:1c.2: setting latency timer to 64
[    0.407113] pci 0000:00:1e.0: setting latency timer to 64
[    0.407118] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.407120] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.407123] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.407125] pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.407127] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.407129] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.407131] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.407133] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
[    0.407135] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.407137] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.407139] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.407173] NET: Registered protocol family 2
[    0.407334] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.408533] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.412735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.413236] TCP: Hash tables configured (established 524288 bind 65536)
[    0.413239] TCP reno registered
[    0.413366] NET: Registered protocol family 1
[    0.413439] Trying to unpack rootfs image as initramfs...
[    0.501279] Switched to high resolution mode on CPU 1
[    0.510050] Switched to high resolution mode on CPU 0
[    0.574006] Freeing initrd memory: 7944k freed
[    0.577701] Scanning for low memory corruption every 60 seconds
[    0.577837] audit: initializing netlink socket (disabled)
[    0.577854] type=2000 audit(1269351690.570:1): initialized
[    0.586358] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.587571] VFS: Disk quotas dquot_6.5.2
[    0.587623] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.588131] fuse init (API version 7.12)
[    0.588202] msgmni has been set to 7924
[    0.588382] alg: No test for stdrng (krng)
[    0.588393] io scheduler noop registered
[    0.588395] io scheduler anticipatory registered
[    0.588397] io scheduler deadline registered
[    0.588436] io scheduler cfq registered (default)
[    0.588577] pci 0000:04:00.0: Boot video device
[    0.588697]   alloc irq_desc for 24 on node 0
[    0.588699]   alloc kstat_irqs on node 0
[    0.588707] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.588712] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.588833]   alloc irq_desc for 25 on node 0
[    0.588834]   alloc kstat_irqs on node 0
[    0.588842] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.588851] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.589000]   alloc irq_desc for 26 on node 0
[    0.589002]   alloc kstat_irqs on node 0
[    0.589010] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.589019] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.589111] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.589182] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.589290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.589294] ACPI: Power Button [PWRF]
[    0.589349] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.589351] ACPI: Power Button [PWRB]
[    0.589955] ACPI: SSDT 00000000cffb0270 00277 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[    0.590180] processor LNXCPU:00: registered as cooling_device0
[    0.590540] ACPI: SSDT 00000000cffb0700 00277 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[    0.590736] processor LNXCPU:01: registered as cooling_device1
[    0.593404] Linux agpgart interface v0.103
[    0.593414] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.594481] brd: module loaded
[    0.594855] loop: module loaded
[    0.594921] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.595044] ahci 0000:00:1f.2: version 3.0
[    0.595062]   alloc irq_desc for 19 on node 0
[    0.595064]   alloc kstat_irqs on node 0
[    0.595071] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.595114]   alloc irq_desc for 27 on node 0
[    0.595116]   alloc kstat_irqs on node 0
[    0.595124] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    0.595168] ahci: SSS flag set, parallel bus scan disabled
[    0.595213] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[    0.595216] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
[    0.595220] ahci 0000:00:1f.2: setting latency timer to 64
[    0.690124] scsi0 : ahci
[    0.690244] scsi1 : ahci
[    0.690295] scsi2 : ahci
[    0.690340] scsi3 : ahci
[    0.690387] scsi4 : ahci
[    0.690433] scsi5 : ahci
[    0.690558] ata1: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff100 irq 27
[    0.690561] ata2: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff180 irq 27
[    0.690564] ata3: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff200 irq 27
[    0.690567] ata4: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff280 irq 27
[    0.690570] ata5: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff300 irq 27
[    0.690572] ata6: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff380 irq 27
[    0.691316] Fixed MDIO Bus: probed
[    0.691344] PPP generic driver version 2.4.2
[    0.691441] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.691491] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.691512] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.691515] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.691569] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.695475] ehci_hcd 0000:00:1a.7: debug port 1
[    0.695481] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.695496] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fec00
[    0.710032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.710136] usb usb1: configuration #1 chosen from 1 choice
[    0.710184] hub 1-0:1.0: USB hub found
[    0.710190] hub 1-0:1.0: 4 ports detected
[    0.710267]   alloc irq_desc for 23 on node 0
[    0.710269]   alloc kstat_irqs on node 0
[    0.710275] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.710286] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.710289] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.710327] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.714211] ehci_hcd 0000:00:1d.7: debug port 1
[    0.714216] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.714229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[    0.730032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.730147] usb usb2: configuration #1 chosen from 1 choice
[    0.730188] hub 2-0:1.0: USB hub found
[    0.730194] hub 2-0:1.0: 8 ports detected
[    0.730258] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.730278] uhci_hcd: USB Universal Host Controller Interface driver
[    0.730357] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.730365] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.730368] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.730401] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.730432] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[    0.730501] usb usb3: configuration #1 chosen from 1 choice
[    0.730522] hub 3-0:1.0: USB hub found
[    0.730528] hub 3-0:1.0: 2 ports detected
[    0.730594]   alloc irq_desc for 21 on node 0
[    0.730596]   alloc kstat_irqs on node 0
[    0.730600] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.730606] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.730609] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.730635] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.730664] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[    0.730731] usb usb4: configuration #1 chosen from 1 choice
[    0.730754] hub 4-0:1.0: USB hub found
[    0.730760] hub 4-0:1.0: 2 ports detected
[    0.730828] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.730833] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.730837] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.730863] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.730886] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[    0.730954] usb usb5: configuration #1 chosen from 1 choice
[    0.730975] hub 5-0:1.0: USB hub found
[    0.730980] hub 5-0:1.0: 2 ports detected
[    0.731041] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.731047] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.731050] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.731080] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.731111] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[    0.731181] usb usb6: configuration #1 chosen from 1 choice
[    0.731205] hub 6-0:1.0: USB hub found
[    0.731209] hub 6-0:1.0: 2 ports detected
[    0.731278] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.731283] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.731286] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.731314] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.731337] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[    0.731403] usb usb7: configuration #1 chosen from 1 choice
[    0.731426] hub 7-0:1.0: USB hub found
[    0.731431] hub 7-0:1.0: 2 ports detected
[    0.731498] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.731503] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.731506] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.731532] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.731555] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[    0.731622] usb usb8: configuration #1 chosen from 1 choice
[    0.731643] hub 8-0:1.0: USB hub found
[    0.731653] hub 8-0:1.0: 2 ports detected
[    0.731744] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.731746] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.732074] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.732132] mice: PS/2 mouse device common for all mice
[    0.732215] rtc_cmos 00:03: RTC can wake from S4
[    0.732246] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.732272] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.732368] device-mapper: uevent: version 1.0.3
[    0.732440] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.732488] device-mapper: multipath: version 1.1.0 loaded
[    0.732491] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.732613] cpuidle: using governor ladder
[    0.732615] cpuidle: using governor menu
[    0.732964] TCP cubic registered
[    0.733070] NET: Registered protocol family 10
[    0.733449] lo: Disabled Privacy Extensions
[    0.733687] NET: Registered protocol family 17
[    0.733705] Bluetooth: L2CAP ver 2.13
[    0.733707] Bluetooth: L2CAP socket layer initialized
[    0.733710] Bluetooth: SCO (Voice Link) ver 0.6
[    0.733712] Bluetooth: SCO socket layer initialized
[    0.733743] Bluetooth: RFCOMM TTY layer initialized
[    0.733746] Bluetooth: RFCOMM socket layer initialized
[    0.733747] Bluetooth: RFCOMM ver 1.11
[    0.734311] PM: Resume from disk failed.
[    0.734323] registered taskstats version 1
[    0.734434]   Magic number: 2:221:686
[    0.734518] rtc_cmos 00:03: setting system clock to 2010-03-23 13:41:31 UTC (1269351691)
[    0.734521] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.734523] EDD information not available.
[    0.760627] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.041294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.059165] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA57A, max UDMA/133
[    1.059171] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.059908] ata1.00: configured for UDMA/133
[    1.070169] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[    1.070276] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.070309] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.070347] sd 0:0:0:0: [sda] Write Protect is off
[    1.070349] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.070369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.070491]  sda: sda1 sda2 sda3
[    1.092317] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.150024] usb 2-5: new high speed USB device using ehci_hcd and address 2
[    1.821285] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.822064] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653Z, 4303, max UDMA/33, ATAPI AN
[    1.823111] ata2.00: configured for UDMA/33
[    1.840614] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653Z  4303 PQ: 0 ANSI: 5
[    1.842635] usb 2-5: configuration #1 chosen from 1 choice
[    1.845290] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.845295] Uniform CD-ROM driver Revision: 3.20
[    1.845427] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.845463] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.120039] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    2.191279] ata3: SATA link down (SStatus 0 SControl 300)
[    2.310403] usb 3-2: configuration #1 chosen from 1 choice
[    2.560029] ata4: SATA link down (SStatus 0 SControl 300)
[    2.931279] ata5: SATA link down (SStatus 0 SControl 300)
[    3.301290] ata6: SATA link down (SStatus 0 SControl 300)
[    3.320045] Freeing unused kernel memory: 660k freed
[    3.320262] Write protecting the kernel read-only data: 7580k
[    3.438127] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.438165] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.438262] r8169 0000:02:00.0: setting latency timer to 64
[    3.438400]   alloc irq_desc for 28 on node 0
[    3.438402]   alloc kstat_irqs on node 0
[    3.438439] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[    3.438975] eth0: RTL8168c/8111c at 0xffffc9000067e000, 00:23:54:a3:77:32, XID 3c4000c0 IRQ 28
[    3.485316] Initializing USB Mass Storage driver...
[    3.485550] scsi6 : SCSI emulation for USB Mass Storage devices
[    3.485651] usbcore: registered new interface driver usb-storage
[    3.485654] USB Mass Storage support registered.
[    3.485756] usb-storage: device found at 2
[    3.485757] usb-storage: waiting for device to settle before scanning
[    3.492913]   alloc irq_desc for 20 on node 0
[    3.492917]   alloc kstat_irqs on node 0
[    3.492924] ohci1394 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.500773] usbcore: registered new interface driver hiddev
[    3.506563] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
[    3.506634] generic-usb 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-2/input0
[    3.515336] generic-usb 0003:046D:C041.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-2/input1
[    3.515360] usbcore: registered new interface driver usbhid
[    3.515363] usbhid: v2.6:USB HID core driver
[    3.552081] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[fe9ff000-fe9ff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    4.605781] EXT4-fs (loop0): barriers enabled
[    4.617836] kjournald2 starting: pid 425, dev loop0:8, commit interval 5 seconds
[    4.617855] EXT4-fs (loop0): delayed allocation enabled
[    4.617858] EXT4-fs: file extents enabled
[    4.619328] EXT4-fs: mballoc enabled
[    4.619342] EXT4-fs (loop0): mounted filesystem with ordered data mode
[    4.870199] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0001b0c5a1]
[    5.265433] type=1505 audit(1269351696.026:2): operation="profile_load" pid=449 name=/usr/share/gdm/guest-session/Xsession
[    5.267391] type=1505 audit(1269351696.026:3): operation="profile_load" pid=450 name=/sbin/dhclient3
[    5.268003] type=1505 audit(1269351696.026:4): operation="profile_load" pid=450 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    5.268340] type=1505 audit(1269351696.026:5): operation="profile_load" pid=450 name=/usr/lib/connman/scripts/dhclient-script
[    5.335477] type=1505 audit(1269351696.096:6): operation="profile_load" pid=451 name=/usr/bin/evince
[    5.345300] type=1505 audit(1269351696.106:7): operation="profile_load" pid=451 name=/usr/bin/evince-previewer
[    5.351146] type=1505 audit(1269351696.106:8): operation="profile_load" pid=451 name=/usr/bin/evince-thumbnailer
[    5.364065] type=1505 audit(1269351696.126:9): operation="profile_load" pid=453 name=/usr/lib/cups/backend/cups-pdf
[    5.364769] type=1505 audit(1269351696.126:10): operation="profile_load" pid=453 name=/usr/sbin/cupsd
[    6.467657] udev: starting version 147
[    7.569281] lp: driver loaded but no devices found
[    7.691564] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.120128] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.120132] Disabling lock debugging due to kernel taint
[    8.133487] [fglrx] Maximum main memory to use for locked dma buffers: 3800 MBytes.
[    8.133644] [fglrx]   vendor: 1002 device: 9498 count: 1
[    8.133963] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    8.133975] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.133980] pci 0000:04:00.0: setting latency timer to 64
[    8.134175] [fglrx] Kernel PAT support is enabled
[    8.134197] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
[    8.490225] usb-storage: device scan complete
[    8.496583] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    8.502827] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    8.509074] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    8.515325] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    8.515655] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    8.515748] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    8.515837] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    8.515925] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    8.523580] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    8.525616] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    8.527310] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    8.527529] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    9.134186]   alloc irq_desc for 22 on node 0
[    9.134190]   alloc kstat_irqs on node 0
[    9.134199] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.134269] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.274257] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[    9.274439] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    9.278399] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.278451] HDA Intel 0000:04:00.1: setting latency timer to 64
[   10.691449] Adding 262136k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262136k 
[   10.746149] EXT4-fs (loop0): internal journal on loop0:8
[   11.398976] __ratelimit: 6 callbacks suppressed
[   11.398978] type=1505 audit(1269348102.155:13): operation="profile_replace" pid=948 name=/usr/share/gdm/guest-session/Xsession
[   11.400686] type=1505 audit(1269348102.165:14): operation="profile_replace" pid=949 name=/sbin/dhclient3
[   11.401287] type=1505 audit(1269348102.165:15): operation="profile_replace" pid=949 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   11.401616] type=1505 audit(1269348102.165:16): operation="profile_replace" pid=949 name=/usr/lib/connman/scripts/dhclient-script
[   11.405137] type=1505 audit(1269348102.165:17): operation="profile_replace" pid=950 name=/usr/bin/evince
[   11.415082] type=1505 audit(1269348102.175:18): operation="profile_replace" pid=950 name=/usr/bin/evince-previewer
[   11.420937] type=1505 audit(1269348102.185:19): operation="profile_replace" pid=950 name=/usr/bin/evince-thumbnailer
[   11.429297] type=1505 audit(1269348102.185:20): operation="profile_replace" pid=952 name=/usr/lib/cups/backend/cups-pdf
[   11.430036] type=1505 audit(1269348102.195:21): operation="profile_replace" pid=952 name=/usr/sbin/cupsd
[   11.432835] type=1505 audit(1269348102.195:22): operation="profile_replace" pid=953 name=/usr/sbin/mysqld
[   13.606956] usplash:371 freeing invalid memtype ffffffffd0000000-ffffffffd1000000
[   13.722039] r8169: eth0: link up
[   13.722050] r8169: eth0: link up
[   15.864219]   alloc irq_desc for 29 on node 0
[   15.864223]   alloc kstat_irqs on node 0
[   15.864234] fglrx_pci 0000:04:00.0: irq 29 for MSI/MSI-X
[   15.871008] [fglrx] Firegl kernel thread PID: 1388
[   16.997164] ppdev: user-space parallel port driver
[   17.952638] [fglrx] Gart USWC size:1237 M.
[   17.952642] [fglrx] Gart cacheable size:491 M.
[   17.952647] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   17.952649] [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000 
[   17.952651] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 
[   18.944002] CPU0 attaching NULL sched-domain.
[   18.944008] CPU1 attaching NULL sched-domain.
[   18.971400] CPU0 attaching sched-domain:
[   18.971406]  domain 0: span 0-1 level MC
[   18.971410]   groups: 0 1
[   18.971418]   domain 1: span 0-1 level CPU
[   18.971422]    groups: 0-1 (__cpu_power = 2048)
[   18.971432] CPU1 attaching sched-domain:
[   18.971435]  domain 0: span 0-1 level MC
[   18.971439]   groups: 1 0
[   18.971445]   domain 1: span 0-1 level CPU
[   18.971448]    groups: 0-1 (__cpu_power = 2048)
[   22.357899] CPU0 attaching NULL sched-domain.
[   22.357905] CPU1 attaching NULL sched-domain.
[   22.390142] CPU0 attaching sched-domain:
[   22.390146]  domain 0: span 0-1 level MC
[   22.390149]   groups: 0 1
[   22.390154] CPU1 attaching sched-domain:
[   22.390156]  domain 0: span 0-1 level MC
[   22.390158]   groups: 1 0
[   24.021256] eth0: no IPv6 routers present
[   26.387325] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[  389.372006] usb 2-5: reset high speed USB device using ehci_hcd and address 2

tnntwister

Re : [résolu] Crash kernel quand mise à jour

en fait c'est cette erreur que j'ai au démarrage :

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block

Y'ai mis mon bootlogd actif, mais il n'a pas l'air de logger grand chose...

malbo

Re : [résolu] Crash kernel quand mise à jour

Je suis surpris que tu ne sois pas tombé sur cette solution (le post a été vu 14310 fois à ce jour)  :
http://forum.ubuntu-fr.org/viewtopic.php?pid=3266496#p3266496
La partie purement réparation est celle-ci :

Ajouté le 9 mars 2010 : la réparation décrite dans les lignes suivantes (remplacement du fichier wubildr par un autre téléchargé spécialement) s'effectue entièrement depuis Windows.
Vous le croyez ça ? Il suffit tout simplement de renommer son fichier C: \wubildr en C: \wubildr_pourri et de coller à la place le fichier wubildr proposé dans le lien pour résoudre complètement le problème.
Ce fichier wubildr peut être téléchargé directement là (c'est très léger : 78,6 Ko) :
http://launchpadlibrarian.net/36920146/wubildr

Les autres modifs que j'ai mentionnées dans le lien ne semblent pas indispensables : seul le remplacement du fichier wubildr - qui est normalement sous C: - est utile.

Dernière modification par malbo (Le 23/03/2010, à 16:48)

tnntwister

Re : [résolu] Crash kernel quand mise à jour

J'ai du mal cherché, désolé, et merci pour la solution, ca a marché pour moi.

Par contre, je ne comprends pas pourquoi il ne veut pas logger mon boot, mais bon, c'est annexe.

merci !

tnntwister

Re : [résolu] Crash kernel quand mise à jour

J'ai du mal cherché, désolé, et merci pour la solution, ca a marché pour moi.

Par contre, je ne comprends pas pourquoi il ne veut pas logger mon boot, mais bon, c'est annexe.

merci !