Petit pb de kernel depuis maj difficile vers edgy

jmtt · Le 23/10/2006, à 12:28

Ce message fait suite à ce sujet : http://forum.ubuntu-fr.org/viewtopic.ph … 19#p540719

Je décris le truc dans l'ordre chronologique :

1. Allumage de l'ordi et bios --> normal
2. Grub ---> normal
3. un ou deux flash d'écran rapide
4. écran noir avec messages apparraisant progressivement, mais peu de temps (environ 20 secondes entre premier et dernier)

[des chiffres] ata2:disabling port
[des chiffres] add to rule : invalid kernel operation
[des chiffres] /etc/udev/rules.d/40-fuse.rules:1'

nb : ce n'est pas un copié/collé, il peut y avoir une erreur de frappe dans mon recopiage

5. Après ça le démarrage se fait avec les messages à l'ancienne (print blanc sur ecran noir)
6. J'arrive sur l'accueil GDM pour se logguer sans avoir eu à faire d'interaction, notamment, pas de passage en console pour lancer gdm ou x.

--> Donc, une erreur, et pas d'animation graphique durant le chargement de l'OS.

Pour éteindre, c'est même genre : l'écran flash une ou deux fois, puis messages à l'ancienne (print blanc sur ecran noir) durant le shutdown.

Dernière modification par jmtt (Le 23/10/2006, à 17:46)

Tao · Le 23/10/2006, à 23:43

En espérant que ça donne plus de détails :
- "sudo dmesg -c" pour nettoyer un peu
- rédémarre ton pc
- envoie-nous le résultat de "dmesg"

Peut-être le contenu du fichier /var/log/kern.log pourrait nous donner des pistes aussi.

jmtt · Le 24/10/2006, à 00:08

minh2@ubunturdc:~$ sudo dmesg -c
Password:
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001ffbe000 - 000000001fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 130992
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126896 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fb2d0
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x06000516 MSFT 0x00000097) @ 0x1ffb0000
[17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x06000516 MSFT 0x00000097) @ 0x1ffb0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x06000516 MSFT 0x00000097) @ 0x1ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I  AMI_OEM  0x06000516 MSFT 0x00000097) @ 0x1ffbe040
[17179569.184000] ACPI: MCFG (v001 A M I  OEMMCFG  0x06000516 MSFT 0x00000097) @ 0x1ffb6b60
[17179569.184000] ACPI: DSDT (v001  A0225 A0225001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=1f88e4d6-27c8-4656-91e4-6f7e5944422b ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 3011.210 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.104000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.104000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.112000] Memory: 508692k/523968k available (1829k kernel code, 14608k reserved, 1038k data, 288k init, 0k highmem)
[17179571.112000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.192000] Calibrating delay using timer specific routine.. 6028.46 BogoMIPS (lpj=12056934)
[17179571.192000] Security Framework v1.0.0 initialized
[17179571.192000] SELinux:  Disabled at boot.
[17179571.192000] Mount-cache hash table entries: 512
[17179571.192000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179571.192000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179571.192000] monitor/mwait feature present.
[17179571.192000] using mwait in idle threads.
[17179571.192000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.192000] CPU: L2 cache: 2048K
[17179571.192000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000649d 00000000 00000000
[17179571.192000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[17179571.192000] Checking 'hlt' instruction... OK.
[17179571.208000] SMP alternatives: switching to UP code
[17179571.208000] Freeing SMP alternatives: 0k freed
[17179571.208000] checking if image is initramfs... it is
[17179571.696000] Freeing initrd memory: 6537k freed
[17179571.696000] ACPI: Core revision 20060707
[17179571.696000] ACPI: Looking for DSDT ... not found!
[17179571.700000] ENABLING IO-APIC IRQs
[17179571.700000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.844000] NET: Registered protocol family 16
[17179571.844000] EISA bus registered
[17179571.844000] ACPI: bus type pci registered
[17179571.844000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179571.844000] PCI: Not using MMCONFIG.
[17179571.844000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[17179571.844000] PCI: Using configuration type 1
[17179571.844000] Setting up standard PCI resources
[17179571.860000] ACPI: Interpreter enabled
[17179571.860000] ACPI: Using IOAPIC for interrupt routing
[17179571.860000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.860000] PCI: Probing PCI hardware (bus 00)
[17179571.864000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[17179571.864000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[17179571.864000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179571.864000] Boot video device is 0000:04:00.0
[17179571.864000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.864000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.864000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179571.864000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[17179571.864000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179571.868000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[17179571.872000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.872000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.872000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[17179571.872000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.872000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.872000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.872000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.872000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.876000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.876000] pnp: PnP ACPI init
[17179571.880000] pnp: PnP ACPI: found 19 devices
[17179571.880000] PnPBIOS: Disabled by ACPI PNP
[17179571.880000] PCI: Using ACPI for IRQ routing
[17179571.880000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.892000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[17179571.892000] PCI: Bridge: 0000:00:01.0
[17179571.892000]   IO window: e000-efff
[17179571.892000]   MEM window: d2f00000-d7ffffff
[17179571.892000]   PREFETCH window: d8000000-dfffffff
[17179571.892000] PCI: Bridge: 0000:00:1c.0
[17179571.892000]   IO window: d000-dfff
[17179571.892000]   MEM window: disabled.
[17179571.892000]   PREFETCH window: disabled.
[17179571.892000] PCI: Bridge: 0000:00:1c.1
[17179571.892000]   IO window: c000-cfff
[17179571.892000]   MEM window: d2e00000-d2efffff
[17179571.892000]   PREFETCH window: disabled.
[17179571.892000] PCI: Bridge: 0000:00:1e.0
[17179571.892000]   IO window: b000-bfff
[17179571.892000]   MEM window: disabled.
[17179571.892000]   PREFETCH window: disabled.
[17179571.892000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179571.892000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.892000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179571.892000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.892000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179571.892000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.892000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.892000] NET: Registered protocol family 2
[17179571.932000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179571.932000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179571.932000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179571.932000] TCP: Hash tables configured (established 16384 bind 8192)
[17179571.932000] TCP reno registered
[17179571.932000] audit: initializing netlink socket (disabled)
[17179571.932000] audit(1161613694.932:1): initialized
[17179571.932000] VFS: Disk quotas dquot_6.5.1
[17179571.932000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.932000] Initializing Cryptographic API
[17179571.932000] io scheduler noop registered
[17179571.932000] io scheduler anticipatory registered
[17179571.932000] io scheduler deadline registered
[17179571.932000] io scheduler cfq registered (default)
[17179571.932000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179571.932000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.932000] assign_interrupt_mode Found MSI capability
[17179571.932000] Allocate Port Service[0000:00:01.0:pcie00]
[17179571.932000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179571.932000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.932000] assign_interrupt_mode Found MSI capability
[17179571.932000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179571.932000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179571.932000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179571.932000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.932000] assign_interrupt_mode Found MSI capability
[17179571.932000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179571.932000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179571.932000] isapnp: Scanning for PnP cards...
[17179572.284000] isapnp: No Plug & Play device found
[17179572.304000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.304000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.304000] 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.304000] mice: PS/2 mouse device common for all mice
[17179572.304000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.304000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.304000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.304000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179572.308000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.308000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.308000] EISA: Probing bus 0 at eisa.0
[17179572.308000] Cannot allocate resource for EISA slot 8
[17179572.308000] EISA: Detected 0 cards.
[17179572.308000] TCP bic registered
[17179572.308000] NET: Registered protocol family 1
[17179572.308000] NET: Registered protocol family 8
[17179572.308000] NET: Registered protocol family 20
[17179572.308000] Using IPI Shortcut mode
[17179572.308000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.308000] Freeing unused kernel memory: 288k freed
[17179572.332000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.376000] Capability LSM initialized
[17179573.692000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
[17179573.692000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179573.692000] ACPI: Getting cpuindex for acpiid 0x2
[17179573.976000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179573.976000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
[17179573.976000] ICH6: chipset revision 5
[17179573.976000] ICH6: not 100% native mode: will probe irqs later
[17179573.976000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
[17179573.976000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[17179573.976000] Probing IDE interface ide0...
[17179575.344000] hdb: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
[17179575.400000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.400000] Probing IDE interface ide1...
[17179575.972000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.972000] Uniform CD-ROM driver Revision: 3.20
[17179576.040000] SCSI subsystem initialized
[17179576.044000] libata version 1.20 loaded.
[17179576.044000] ata_piix 0000:00:1f.2: version 1.05
[17179576.044000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
[17179576.044000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179576.044000] ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225
[17179576.044000] ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225
[17179576.208000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:207f
[17179576.208000] ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
[17179576.216000] ata1: dev 0 configured for UDMA/133
[17179576.216000] scsi0 : ata_piix
[17179576.380000] ata2: disabling port
[17179576.380000] scsi1 : ata_piix
[17179576.380000]   Vendor: ATA       Model: Maxtor 6L160M0    Rev: BANC
[17179576.380000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179576.388000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
[17179576.388000] sda: Write Protect is off
[17179576.388000] sda: Mode Sense: 00 3a 00 00
[17179576.388000] SCSI device sda: drive cache: write back
[17179576.388000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
[17179576.388000] sda: Write Protect is off
[17179576.388000] sda: Mode Sense: 00 3a 00 00
[17179576.388000] SCSI device sda: drive cache: write back
[17179576.388000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[17179576.464000] sd 0:0:0:0: Attached scsi disk sda
[17179577.076000] Probing IDE interface ide1...
[17179577.116000] usbcore: registered new driver usbfs
[17179577.116000] usbcore: registered new driver hub
[17179577.116000] USB Universal Host Controller Interface driver v3.0
[17179577.120000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179577.120000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.120000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.120000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.120000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000
[17179577.120000] usb usb1: configuration #1 chosen from 1 choice
[17179577.120000] hub 1-0:1.0: USB hub found
[17179577.120000] hub 1-0:1.0: 2 ports detected
[17179577.224000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
[17179577.224000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.224000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.224000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.224000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00008400
[17179577.224000] usb usb2: configuration #1 chosen from 1 choice
[17179577.224000] hub 2-0:1.0: USB hub found
[17179577.224000] hub 2-0:1.0: 2 ports detected
[17179577.328000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
[17179577.328000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.328000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.328000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.328000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x00008800
[17179577.328000] usb usb3: configuration #1 chosen from 1 choice
[17179577.328000] hub 3-0:1.0: USB hub found
[17179577.328000] hub 3-0:1.0: 2 ports detected
[17179577.432000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179577.432000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.432000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.432000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.432000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00009000
[17179577.432000] usb usb4: configuration #1 chosen from 1 choice
[17179577.432000] hub 4-0:1.0: USB hub found
[17179577.432000] hub 4-0:1.0: 2 ports detected
[17179577.536000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[17179577.536000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.536000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.536000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179577.536000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.536000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.536000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2dffc00
[17179577.540000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.540000] usb usb5: configuration #1 chosen from 1 choice
[17179577.540000] hub 5-0:1.0: USB hub found
[17179577.540000] hub 5-0:1.0: 8 ports detected
[17179577.568000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[17179577.768000] kjournald starting.  Commit interval 5 seconds
[17179577.768000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.072000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[17179578.264000] usb 2-2: configuration #1 chosen from 1 choice
[17179587.464000] hw_random hardware driver 1.0.0 loaded
[17179587.472000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.472000] agpgart: Detected an Intel 915G Chipset.
[17179587.488000] agpgart: AGP aperture is 256M @ 0x0
[17179587.612000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.612000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.672000] Real Time Clock Driver v1.12ac
[17179587.720000] parport: PnPBIOS parport detected.
[17179587.720000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179587.748000] input: PC Speaker as /class/input/input1
[17179587.760000] Floppy drive(s): fd0 is 1.44M
[17179587.780000] FDC 0 is a post-1991 82077
[17179588.004000] logips2pp: Detected unknown logitech mouse model 62
[17179588.484000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[17179588.848000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179589.136000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179589.136000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179589.136000] sky2 v1.6.1 addr 0xd2efc000 irq 177 Yukon-EC (0xb6) rev 2
[17179589.136000] sky2 eth0: addr 00:13:d4:7f:a5:05
[17179589.336000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0817
[17179589.336000] usbcore: registered new driver usblp
[17179589.336000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179589.348000] ts: Compaq touchscreen protocol output
[17179589.504000] sky2 eth0: enabling interface
[17179589.620000] nvidia: module license 'NVIDIA' taints kernel.
[17179589.944000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.944000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[17179589.944000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9625  Thu Sep 14 15:33:21 PDT 2006
[17179589.972000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179590.104000] Intel ISA PCIC probe: not found.
[17179590.180000] lp0: using parport0 (interrupt-driven).
[17179590.240000] fuse init (API version 7.6)
[17179590.280000] Adding 1461872k swap on /dev/sda7.  Priority:-1 extents:1 across:1461872k
[17179590.340000] EXT3 FS on sda5, internal journal
[17179590.436000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179590.512000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.512000] md: bitmap version 4.39
[17179591.208000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[17179591.540000] kjournald starting.  Commit interval 5 seconds
[17179591.548000] EXT3 FS on sda6, internal journal
[17179591.548000] EXT3-fs: mounted filesystem with ordered data mode.
[17179591.612000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179591.800000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[17179591.820000] NET: Registered protocol family 10
[17179591.820000] lo: Disabled Privacy Extensions
[17179591.820000] IPv6 over IPv4 tunneling driver
[17179592.736000] ACPI: Power Button (FF) [PWRF]
[17179592.736000] ACPI: Power Button (CM) [PWRB]
[17179592.872000] ibm_acpi: ec object not found
[17179592.912000] pcc_acpi: loading...
[17179600.120000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179600.120000] apm: overridden by ACPI.
[17179601.856000] Bluetooth: Core ver 2.8
[17179601.856000] NET: Registered protocol family 31
[17179601.856000] Bluetooth: HCI device and connection manager initialized
[17179601.856000] Bluetooth: HCI socket layer initialized
[17179601.864000] Bluetooth: L2CAP ver 2.8
[17179601.864000] Bluetooth: L2CAP socket layer initialized
[17179601.872000] eth0: no IPv6 routers present
[17179601.876000] Bluetooth: RFCOMM socket layer initialized
[17179601.876000] Bluetooth: RFCOMM TTY layer initialized
[17179601.876000] Bluetooth: RFCOMM ver 1.7
minh2@ubunturdc:~$

Le jour où la touche pause marchera aussi bien en cours de sessions graphique, qu'au boot ou sur le bios, on se fera moins chier pour lire,

Je reboot et donne la suite.

jmtt · Le 24/10/2006, à 00:21

- rédémarre ton pc
- envoie-nous le résultat de "dmesg"

minh2@ubunturdc:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001ffbe000 - 000000001fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 130992
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126896 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fb2d0
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x06000516 MSFT 0x00000097) @ 0x1ffb0000
[17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x06000516 MSFT 0x00000097) @ 0x1ffb0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x06000516 MSFT 0x00000097) @ 0x1ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I  AMI_OEM  0x06000516 MSFT 0x00000097) @ 0x1ffbe040
[17179569.184000] ACPI: MCFG (v001 A M I  OEMMCFG  0x06000516 MSFT 0x00000097) @ 0x1ffb6b60
[17179569.184000] ACPI: DSDT (v001  A0225 A0225001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=1f88e4d6-27c8-4656-91e4-6f7e5944422b ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 3011.178 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.212000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.212000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.220000] Memory: 508692k/523968k available (1829k kernel code, 14608k reserved, 1038k data, 288k init, 0k highmem)
[17179569.220000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.300000] Calibrating delay using timer specific routine.. 6028.51 BogoMIPS (lpj=12057027)
[17179569.300000] Security Framework v1.0.0 initialized
[17179569.300000] SELinux:  Disabled at boot.
[17179569.300000] Mount-cache hash table entries: 512
[17179569.300000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179569.300000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179569.300000] monitor/mwait feature present.
[17179569.300000] using mwait in idle threads.
[17179569.300000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179569.300000] CPU: L2 cache: 2048K
[17179569.300000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000649d 00000000 00000000
[17179569.300000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[17179569.300000] Checking 'hlt' instruction... OK.
[17179569.316000] SMP alternatives: switching to UP code
[17179569.316000] Freeing SMP alternatives: 0k freed
[17179569.316000] checking if image is initramfs... it is
[17179569.804000] Freeing initrd memory: 6537k freed
[17179569.804000] ACPI: Core revision 20060707
[17179569.804000] ACPI: Looking for DSDT ... not found!
[17179569.808000] ENABLING IO-APIC IRQs
[17179569.808000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179569.948000] NET: Registered protocol family 16
[17179569.948000] EISA bus registered
[17179569.948000] ACPI: bus type pci registered
[17179569.948000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179569.948000] PCI: Not using MMCONFIG.
[17179569.948000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[17179569.948000] PCI: Using configuration type 1
[17179569.948000] Setting up standard PCI resources
[17179569.964000] ACPI: Interpreter enabled
[17179569.964000] ACPI: Using IOAPIC for interrupt routing
[17179569.964000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179569.964000] PCI: Probing PCI hardware (bus 00)
[17179569.968000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[17179569.968000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[17179569.968000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179569.968000] Boot video device is 0000:04:00.0
[17179569.968000] PCI: Transparent bridge - 0000:00:1e.0
[17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179569.972000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[17179569.976000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179569.976000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179569.976000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[17179569.976000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179569.976000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.976000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.976000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.976000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179569.980000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179569.980000] pnp: PnP ACPI init
[17179569.984000] pnp: PnP ACPI: found 19 devices
[17179569.984000] PnPBIOS: Disabled by ACPI PNP
[17179569.984000] PCI: Using ACPI for IRQ routing
[17179569.984000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179569.996000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[17179569.996000] PCI: Bridge: 0000:00:01.0
[17179569.996000]   IO window: e000-efff
[17179569.996000]   MEM window: d2f00000-d7ffffff
[17179569.996000]   PREFETCH window: d8000000-dfffffff
[17179569.996000] PCI: Bridge: 0000:00:1c.0
[17179569.996000]   IO window: d000-dfff
[17179569.996000]   MEM window: disabled.
[17179569.996000]   PREFETCH window: disabled.
[17179569.996000] PCI: Bridge: 0000:00:1c.1
[17179569.996000]   IO window: c000-cfff
[17179569.996000]   MEM window: d2e00000-d2efffff
[17179569.996000]   PREFETCH window: disabled.
[17179569.996000] PCI: Bridge: 0000:00:1e.0
[17179569.996000]   IO window: b000-bfff
[17179569.996000]   MEM window: disabled.
[17179569.996000]   PREFETCH window: disabled.
[17179569.996000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179569.996000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179569.996000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179569.996000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179569.996000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179569.996000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179569.996000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179569.996000] NET: Registered protocol family 2
[17179570.036000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.036000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179570.036000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179570.036000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.036000] TCP reno registered
[17179570.036000] audit: initializing netlink socket (disabled)
[17179570.036000] audit(1161645101.036:1): initialized
[17179570.036000] VFS: Disk quotas dquot_6.5.1
[17179570.036000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.036000] Initializing Cryptographic API
[17179570.036000] io scheduler noop registered
[17179570.036000] io scheduler anticipatory registered
[17179570.036000] io scheduler deadline registered
[17179570.036000] io scheduler cfq registered (default)
[17179570.036000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.036000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.036000] assign_interrupt_mode Found MSI capability
[17179570.036000] Allocate Port Service[0000:00:01.0:pcie00]
[17179570.036000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.036000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.036000] assign_interrupt_mode Found MSI capability
[17179570.036000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179570.036000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179570.036000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179570.036000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179570.036000] assign_interrupt_mode Found MSI capability
[17179570.036000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179570.036000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179570.036000] isapnp: Scanning for PnP cards...
[17179570.388000] isapnp: No Plug & Play device found
[17179570.408000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.408000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.408000] 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.408000] mice: PS/2 mouse device common for all mice
[17179570.408000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.408000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.408000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.408000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179570.412000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.412000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.412000] EISA: Probing bus 0 at eisa.0
[17179570.412000] Cannot allocate resource for EISA slot 8
[17179570.412000] EISA: Detected 0 cards.
[17179570.412000] TCP bic registered
[17179570.412000] NET: Registered protocol family 1
[17179570.412000] NET: Registered protocol family 8
[17179570.412000] NET: Registered protocol family 20
[17179570.412000] Using IPI Shortcut mode
[17179570.412000] ACPI: (supports S0 S1 S3 S4 S5)
[17179570.412000] Freeing unused kernel memory: 288k freed
[17179570.436000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.480000] Capability LSM initialized
[17179571.504000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
[17179571.504000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179571.504000] ACPI: Getting cpuindex for acpiid 0x2
[17179572.060000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179572.060000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
[17179572.060000] ICH6: chipset revision 5
[17179572.060000] ICH6: not 100% native mode: will probe irqs later
[17179572.060000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
[17179572.060000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[17179572.060000] Probing IDE interface ide0...
[17179573.424000] hdb: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
[17179573.480000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.480000] Probing IDE interface ide1...
[17179574.052000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179574.052000] Uniform CD-ROM driver Revision: 3.20
[17179574.096000] SCSI subsystem initialized
[17179574.100000] libata version 1.20 loaded.
[17179574.100000] ata_piix 0000:00:1f.2: version 1.05
[17179574.100000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
[17179574.100000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179574.100000] ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225
[17179574.100000] ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225
[17179574.264000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:207f
[17179574.264000] ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
[17179574.272000] ata1: dev 0 configured for UDMA/133
[17179574.272000] scsi0 : ata_piix
[17179574.436000] ata2: disabling port
[17179574.436000] scsi1 : ata_piix
[17179574.436000]   Vendor: ATA       Model: Maxtor 6L160M0    Rev: BANC
[17179574.436000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179574.444000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
[17179574.444000] sda: Write Protect is off
[17179574.444000] sda: Mode Sense: 00 3a 00 00
[17179574.444000] SCSI device sda: drive cache: write back
[17179574.444000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
[17179574.444000] sda: Write Protect is off
[17179574.444000] sda: Mode Sense: 00 3a 00 00
[17179574.444000] SCSI device sda: drive cache: write back
[17179574.444000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[17179574.540000] sd 0:0:0:0: Attached scsi disk sda
[17179575.028000] Probing IDE interface ide1...
[17179575.068000] usbcore: registered new driver usbfs
[17179575.068000] usbcore: registered new driver hub
[17179575.068000] USB Universal Host Controller Interface driver v3.0
[17179575.072000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179575.072000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179575.072000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179575.072000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179575.072000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000
[17179575.072000] usb usb1: configuration #1 chosen from 1 choice
[17179575.072000] hub 1-0:1.0: USB hub found
[17179575.072000] hub 1-0:1.0: 2 ports detected
[17179575.176000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
[17179575.176000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179575.176000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179575.176000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179575.176000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00008400
[17179575.176000] usb usb2: configuration #1 chosen from 1 choice
[17179575.176000] hub 2-0:1.0: USB hub found
[17179575.176000] hub 2-0:1.0: 2 ports detected
[17179575.280000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
[17179575.280000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179575.280000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179575.280000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179575.280000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x00008800
[17179575.280000] usb usb3: configuration #1 chosen from 1 choice
[17179575.280000] hub 3-0:1.0: USB hub found
[17179575.280000] hub 3-0:1.0: 2 ports detected
[17179575.384000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179575.384000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179575.384000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179575.384000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179575.384000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00009000
[17179575.384000] usb usb4: configuration #1 chosen from 1 choice
[17179575.384000] hub 4-0:1.0: USB hub found
[17179575.384000] hub 4-0:1.0: 2 ports detected
[17179575.488000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[17179575.488000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179575.488000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179575.488000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179575.488000] ehci_hcd 0000:00:1d.7: debug port 1
[17179575.488000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179575.488000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2dffc00
[17179575.492000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179575.492000] usb usb5: configuration #1 chosen from 1 choice
[17179575.492000] hub 5-0:1.0: USB hub found
[17179575.492000] hub 5-0:1.0: 8 ports detected
[17179575.520000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[17179575.720000] kjournald starting.  Commit interval 5 seconds
[17179575.720000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.024000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[17179576.212000] usb 2-2: configuration #1 chosen from 1 choice
[17179584.428000] Real Time Clock Driver v1.12ac
[17179584.616000] input: PC Speaker as /class/input/input1
[17179584.624000] hw_random hardware driver 1.0.0 loaded
[17179584.684000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179584.688000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179584.748000] Linux agpgart interface v0.101 (c) Dave Jones
[17179584.752000] agpgart: Detected an Intel 915G Chipset.
[17179584.768000] agpgart: AGP aperture is 256M @ 0x0
[17179585.100000] Floppy drive(s): fd0 is 1.44M
[17179585.120000] FDC 0 is a post-1991 82077
[17179585.248000] parport: PnPBIOS parport detected.
[17179585.248000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179585.308000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179585.308000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179585.308000] sky2 v1.6.1 addr 0xd2efc000 irq 177 Yukon-EC (0xb6) rev 2
[17179585.308000] sky2 eth0: addr 00:13:d4:7f:a5:05
[17179586.520000] sky2 eth0: enabling interface
[17179586.620000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179586.640000] logips2pp: Detected unknown logitech mouse model 62
[17179586.656000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0817
[17179586.656000] usbcore: registered new driver usblp
[17179586.656000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179586.792000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179587.088000] nvidia: module license 'NVIDIA' taints kernel.
[17179587.340000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179587.340000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[17179587.340000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9625  Thu Sep 14 15:33:21 PDT 2006
[17179587.384000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[17179587.400000] ts: Compaq touchscreen protocol output
[17179587.624000] Intel ISA PCIC probe: not found.
[17179587.700000] lp0: using parport0 (interrupt-driven).
[17179587.760000] fuse init (API version 7.6)
[17179587.796000] Adding 1461872k swap on /dev/sda7.  Priority:-1 extents:1 across:1461872k
[17179587.868000] EXT3 FS on sda5, internal journal
[17179587.964000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179588.044000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179588.044000] md: bitmap version 4.39
[17179588.208000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[17179589.156000] NET: Registered protocol family 10
[17179589.156000] lo: Disabled Privacy Extensions
[17179589.156000] IPv6 over IPv4 tunneling driver
[17179589.208000] kjournald starting.  Commit interval 5 seconds
[17179589.216000] EXT3 FS on sda6, internal journal
[17179589.216000] EXT3-fs: mounted filesystem with ordered data mode.
[17179589.248000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179589.360000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[17179590.472000] ACPI: Power Button (FF) [PWRF]
[17179590.472000] ACPI: Power Button (CM) [PWRB]
[17179590.548000] ibm_acpi: ec object not found
[17179590.576000] pcc_acpi: loading...
[17179597.356000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179597.356000] apm: overridden by ACPI.
[17179599.272000] eth0: no IPv6 routers present
[17179599.288000] Bluetooth: Core ver 2.8
[17179599.288000] NET: Registered protocol family 31
[17179599.288000] Bluetooth: HCI device and connection manager initialized
[17179599.288000] Bluetooth: HCI socket layer initialized
[17179599.308000] Bluetooth: L2CAP ver 2.8
[17179599.308000] Bluetooth: L2CAP socket layer initialized
[17179599.312000] Bluetooth: RFCOMM socket layer initialized
[17179599.312000] Bluetooth: RFCOMM TTY layer initialized
[17179599.312000] Bluetooth: RFCOMM ver 1.7
minh2@ubunturdc:~$

mon print initial quand le boot graphique devrait démarrer est :

[17179574.436000] ata2: disabling port

A ce niveau, ça me dépasse un peu. Vu qu'apparemment il est question du hdd, il s'agit s'un disque sata avec plusieurs partitions (les habituelles linux ext3 et swap, une autre en ext2 et enfin une fat avec des fichiers win). Mais rien ne tracassait sur dapper.

Dernière modification par jmtt (Le 24/10/2006, à 00:23)

Tao · Le 24/10/2006, à 00:22

En fait le dmesg -c avant le reboot, ce n'était pas vraiment la peine de poster le résultat. Ça sert à vider le log pour qu'après le redémarrage le résultat du "dmesg" post-reboot soit plus propre.

J'attends de tes nouvelles!

EDIT : post croisé...

Dernière modification par Tao (Le 24/10/2006, à 00:24)

Tao · Le 24/10/2006, à 00:26

et le fichier /ver/log/kern.log ?

Cela dit je ne suis pas calé en disque sata vu que j'en ai pas...

jmtt · Le 24/10/2006, à 00:33

/var/log/kern.log est vide

Le plus récent est /var/log/kern.log.0

Oct 23 16:28:20 localhost kernel: [17179573.976000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Oct 23 16:28:20 localhost kernel: [17179573.976000] Probing IDE interface ide0...
Oct 23 16:28:20 localhost kernel: [17179575.344000] hdb: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
Oct 23 16:28:20 localhost kernel: [17179575.400000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 23 16:28:20 localhost kernel: [17179575.400000] Probing IDE interface ide1...
Oct 23 16:28:20 localhost kernel: [17179575.972000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Oct 23 16:28:20 localhost kernel: [17179575.972000] Uniform CD-ROM driver Revision: 3.20
Oct 23 16:28:20 localhost kernel: [17179576.040000] SCSI subsystem initialized
Oct 23 16:28:20 localhost kernel: [17179576.044000] libata version 1.20 loaded.
Oct 23 16:28:20 localhost kernel: [17179576.044000] ata_piix 0000:00:1f.2: version 1.05
Oct 23 16:28:20 localhost kernel: [17179576.044000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
Oct 23 16:28:20 localhost kernel: [17179576.044000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct 23 16:28:20 localhost kernel: [17179576.044000] ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225
Oct 23 16:28:20 localhost kernel: [17179576.044000] ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225
Oct 23 16:28:20 localhost kernel: [17179576.208000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:207f
Oct 23 16:28:20 localhost kernel: [17179576.208000] ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
Oct 23 16:28:20 localhost kernel: [17179576.216000] ata1: dev 0 configured for UDMA/133
Oct 23 16:28:20 localhost kernel: [17179576.216000] scsi0 : ata_piix
Oct 23 16:28:20 localhost kernel: [17179576.380000] ata2: disabling port
Oct 23 16:28:20 localhost kernel: [17179576.380000] scsi1 : ata_piix
Oct 23 16:28:20 localhost kernel: [17179576.380000]   Vendor: ATA       Model: Maxtor 6L160M0    Rev: BANC
Oct 23 16:28:20 localhost kernel: [17179576.380000]   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct 23 16:28:20 localhost kernel: [17179576.388000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
Oct 23 16:28:20 localhost kernel: [17179576.388000] sda: Write Protect is off
Oct 23 16:28:20 localhost kernel: [17179576.388000] sda: Mode Sense: 00 3a 00 00
Oct 23 16:28:20 localhost kernel: [17179576.388000] SCSI device sda: drive cache: write back
Oct 23 16:28:20 localhost kernel: [17179576.388000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
Oct 23 16:28:20 localhost kernel: [17179576.388000] sda: Write Protect is off
Oct 23 16:28:20 localhost kernel: [17179576.388000] sda: Mode Sense: 00 3a 00 00
Oct 23 16:28:20 localhost kernel: [17179576.388000] SCSI device sda: drive cache: write back
Oct 23 16:28:20 localhost kernel: [17179576.388000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Oct 23 16:28:20 localhost kernel: [17179576.464000] sd 0:0:0:0: Attached scsi disk sda
Oct 23 16:28:20 localhost kernel: [17179577.076000] Probing IDE interface ide1...
Oct 23 16:28:20 localhost kernel: [17179577.116000] usbcore: registered new driver usbfs
Oct 23 16:28:20 localhost kernel: [17179577.116000] usbcore: registered new driver hub
Oct 23 16:28:20 localhost kernel: [17179577.116000] USB Universal Host Controller Interface driver v3.0
Oct 23 16:28:20 localhost kernel: [17179577.120000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Oct 23 16:28:20 localhost kernel: [17179577.120000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Oct 23 16:28:20 localhost kernel: [17179577.120000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 23 16:28:20 localhost kernel: [17179577.120000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Oct 23 16:28:20 localhost kernel: [17179577.120000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000
Oct 23 16:28:20 localhost kernel: [17179577.120000] usb usb1: configuration #1 chosen from 1 choice
Oct 23 16:28:20 localhost kernel: [17179577.120000] hub 1-0:1.0: USB hub found
Oct 23 16:28:20 localhost kernel: [17179577.120000] hub 1-0:1.0: 2 ports detected
Oct 23 16:28:20 localhost kernel: [17179577.224000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
Oct 23 16:28:20 localhost kernel: [17179577.224000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Oct 23 16:28:20 localhost kernel: [17179577.224000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 23 16:28:20 localhost kernel: [17179577.224000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Oct 23 16:28:20 localhost kernel: [17179577.224000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00008400
Oct 23 16:28:20 localhost kernel: [17179577.224000] usb usb2: configuration #1 chosen from 1 choice
Oct 23 16:28:20 localhost kernel: [17179577.224000] hub 2-0:1.0: USB hub found
Oct 23 16:28:20 localhost kernel: [17179577.224000] hub 2-0:1.0: 2 ports detected
Oct 23 16:28:20 localhost kernel: [17179577.328000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
Oct 23 16:28:20 localhost kernel: [17179577.328000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Oct 23 16:28:20 localhost kernel: [17179577.328000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 23 16:28:20 localhost kernel: [17179577.328000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Oct 23 16:28:20 localhost kernel: [17179577.328000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x00008800
Oct 23 16:28:20 localhost kernel: [17179577.328000] usb usb3: configuration #1 chosen from 1 choice
Oct 23 16:28:20 localhost kernel: [17179577.328000] hub 3-0:1.0: USB hub found
Oct 23 16:28:20 localhost kernel: [17179577.328000] hub 3-0:1.0: 2 ports detected
Oct 23 16:28:20 localhost kernel: [17179577.432000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
Oct 23 16:28:20 localhost kernel: [17179577.432000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Oct 23 16:28:20 localhost kernel: [17179577.432000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct 23 16:28:20 localhost kernel: [17179577.432000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Oct 23 16:28:20 localhost kernel: [17179577.432000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00009000
Oct 23 16:28:20 localhost kernel: [17179577.432000] usb usb4: configuration #1 chosen from 1 choice
Oct 23 16:28:20 localhost kernel: [17179577.432000] hub 4-0:1.0: USB hub found
Oct 23 16:28:20 localhost kernel: [17179577.432000] hub 4-0:1.0: 2 ports detected
Oct 23 16:28:20 localhost kernel: [17179577.536000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Oct 23 16:28:20 localhost kernel: [17179577.536000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Oct 23 16:28:20 localhost kernel: [17179577.536000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 23 16:28:20 localhost kernel: [17179577.536000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Oct 23 16:28:20 localhost kernel: [17179577.536000] ehci_hcd 0000:00:1d.7: debug port 1
Oct 23 16:28:20 localhost kernel: [17179577.536000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Oct 23 16:28:20 localhost kernel: [17179577.536000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2dffc00
Oct 23 16:28:20 localhost kernel: [17179577.540000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 23 16:28:20 localhost kernel: [17179577.540000] usb usb5: configuration #1 chosen from 1 choice
Oct 23 16:28:20 localhost kernel: [17179577.540000] hub 5-0:1.0: USB hub found
Oct 23 16:28:20 localhost kernel: [17179577.540000] hub 5-0:1.0: 8 ports detected
Oct 23 16:28:20 localhost kernel: [17179577.568000] usb 2-2: new full speed USB device using uhci_hcd and address 2
Oct 23 16:28:20 localhost kernel: [17179577.768000] kjournald starting.  Commit interval 5 seconds
Oct 23 16:28:20 localhost kernel: [17179577.768000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 23 16:28:20 localhost kernel: [17179578.072000] usb 2-2: new full speed USB device using uhci_hcd and address 3
Oct 23 16:28:20 localhost kernel: [17179578.264000] usb 2-2: configuration #1 chosen from 1 choice
Oct 23 16:28:20 localhost kernel: [17179587.464000] hw_random hardware driver 1.0.0 loaded
Oct 23 16:28:20 localhost kernel: [17179587.472000] Linux agpgart interface v0.101 (c) Dave Jones
Oct 23 16:28:20 localhost kernel: [17179587.472000] agpgart: Detected an Intel 915G Chipset.
Oct 23 16:28:20 localhost kernel: [17179587.488000] agpgart: AGP aperture is 256M @ 0x0
Oct 23 16:28:20 localhost kernel: [17179587.612000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 23 16:28:20 localhost kernel: [17179587.612000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 23 16:28:20 localhost kernel: [17179587.672000] Real Time Clock Driver v1.12ac
Oct 23 16:28:20 localhost kernel: [17179587.720000] parport: PnPBIOS parport detected.
Oct 23 16:28:20 localhost kernel: [17179587.720000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Oct 23 16:28:20 localhost kernel: [17179587.748000] input: PC Speaker as /class/input/input1
Oct 23 16:28:20 localhost kernel: [17179587.760000] Floppy drive(s): fd0 is 1.44M
Oct 23 16:28:20 localhost kernel: [17179587.780000] FDC 0 is a post-1991 82077
Oct 23 16:28:20 localhost kernel: [17179588.004000] logips2pp: Detected unknown logitech mouse model 62
Oct 23 16:28:20 localhost kernel: [17179588.484000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
Oct 23 16:28:20 localhost kernel: [17179588.848000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 23 16:28:20 localhost kernel: [17179589.136000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 23 16:28:20 localhost kernel: [17179589.136000] PCI: Setting latency timer of device 0000:02:00.0 to 64
Oct 23 16:28:20 localhost kernel: [17179589.136000] sky2 v1.6.1 addr 0xd2efc000 irq 177 Yukon-EC (0xb6) rev 2
Oct 23 16:28:20 localhost kernel: [17179589.136000] sky2 eth0: addr 00:13:d4:7f:a5:05
Oct 23 16:28:20 localhost kernel: [17179589.336000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0817
Oct 23 16:28:20 localhost kernel: [17179589.336000] usbcore: registered new driver usblp
Oct 23 16:28:20 localhost kernel: [17179589.336000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Oct 23 16:28:20 localhost kernel: [17179589.348000] ts: Compaq touchscreen protocol output
Oct 23 16:28:20 localhost kernel: [17179589.504000] sky2 eth0: enabling interface
Oct 23 16:28:20 localhost kernel: [17179589.620000] nvidia: module license 'NVIDIA' taints kernel.
Oct 23 16:28:20 localhost kernel: [17179589.944000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 23 16:28:20 localhost kernel: [17179589.944000] PCI: Setting latency timer of device 0000:04:00.0 to 64
Oct 23 16:28:20 localhost kernel: [17179589.944000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9625  Thu Sep 14 15:33:21 PDT 2006
Oct 23 16:28:20 localhost kernel: [17179589.972000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 23 16:28:20 localhost kernel: [17179590.104000] Intel ISA PCIC probe: not found.
Oct 23 16:28:20 localhost kernel: [17179590.180000] lp0: using parport0 (interrupt-driven).
Oct 23 16:28:20 localhost kernel: [17179590.240000] fuse init (API version 7.6)
Oct 23 16:28:20 localhost kernel: [17179590.280000] Adding 1461872k swap on /dev/sda7.  Priority:-1 extents:1 across:1461872k
Oct 23 16:28:20 localhost kernel: [17179590.340000] EXT3 FS on sda5, internal journal
Oct 23 16:28:20 localhost kernel: [17179590.436000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Oct 23 16:28:20 localhost kernel: [17179590.512000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 23 16:28:20 localhost kernel: [17179590.512000] md: bitmap version 4.39
Oct 23 16:28:20 localhost kernel: [17179591.208000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 23 16:28:20 localhost kernel: [17179591.540000] kjournald starting.  Commit interval 5 seconds
Oct 23 16:28:20 localhost kernel: [17179591.548000] EXT3 FS on sda6, internal journal
Oct 23 16:28:20 localhost kernel: [17179591.548000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 23 16:28:20 localhost kernel: [17179591.612000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Oct 23 16:28:20 localhost kernel: [17179591.800000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Oct 23 16:28:20 localhost kernel: [17179591.820000] NET: Registered protocol family 10
Oct 23 16:28:20 localhost kernel: [17179591.820000] lo: Disabled Privacy Extensions
Oct 23 16:28:20 localhost kernel: [17179591.820000] IPv6 over IPv4 tunneling driver
Oct 23 16:28:20 localhost kernel: [17179592.736000] ACPI: Power Button (FF) [PWRF]
Oct 23 16:28:20 localhost kernel: [17179592.736000] ACPI: Power Button (CM) [PWRB]
Oct 23 16:28:20 localhost kernel: [17179592.872000] ibm_acpi: ec object not found
Oct 23 16:28:20 localhost kernel: [17179592.912000] pcc_acpi: loading...
Oct 23 16:28:26 localhost kernel: [17179600.120000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 23 16:28:26 localhost kernel: [17179600.120000] apm: overridden by ACPI.
Oct 23 16:28:28 localhost kernel: [17179601.856000] Bluetooth: Core ver 2.8
Oct 23 16:28:28 localhost kernel: [17179601.856000] NET: Registered protocol family 31
Oct 23 16:28:28 localhost kernel: [17179601.856000] Bluetooth: HCI device and connection manager initialized
Oct 23 16:28:28 localhost kernel: [17179601.856000] Bluetooth: HCI socket layer initialized
Oct 23 16:28:28 localhost kernel: [17179601.864000] Bluetooth: L2CAP ver 2.8
Oct 23 16:28:28 localhost kernel: [17179601.864000] Bluetooth: L2CAP socket layer initialized
Oct 23 16:28:28 localhost kernel: [17179601.872000] eth0: no IPv6 routers present
Oct 23 16:28:28 localhost kernel: [17179601.876000] Bluetooth: RFCOMM socket layer initialized
Oct 23 16:28:28 localhost kernel: [17179601.876000] Bluetooth: RFCOMM TTY layer initialized
Oct 23 16:28:28 localhost kernel: [17179601.876000] Bluetooth: RFCOMM ver 1.7
Oct 24 01:12:02 localhost kernel: Inspecting /boot/System.map-2.6.17-10-386
Oct 24 01:12:02 localhost kernel: Loaded 22425 symbols from /boot/System.map-2.6.17-10-386.
Oct 24 01:12:02 localhost kernel: Symbols match kernel version 2.6.17.
Oct 24 01:12:02 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Oct 24 01:12:02 localhost kernel: [17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
Oct 24 01:12:02 localhost kernel: [17179569.184000] BIOS-provided physical RAM map:
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 000000001ffbe000 - 000000001fff0000 (ACPI NVS)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
Oct 24 01:12:02 localhost kernel: [17179569.184000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Oct 24 01:12:02 localhost kernel: [17179569.184000] 0MB HIGHMEM available.
Oct 24 01:12:02 localhost kernel: [17179569.184000] 511MB LOWMEM available.
Oct 24 01:12:02 localhost kernel: [17179569.184000] found SMP MP-table at 000ff780
Oct 24 01:12:02 localhost kernel: [17179569.184000] On node 0 totalpages: 130992
Oct 24 01:12:02 localhost kernel: [17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
Oct 24 01:12:02 localhost kernel: [17179569.184000]   Normal zone: 126896 pages, LIFO batch:31
Oct 24 01:12:02 localhost kernel: [17179569.184000] DMI 2.3 present.
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fb2d0
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x06000516 MSFT 0x00000097) @ 0x1ffb0000
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x06000516 MSFT 0x00000097) @ 0x1ffb0200
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x06000516 MSFT 0x00000097) @ 0x1ffb0390
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: OEMB (v001 A M I  AMI_OEM  0x06000516 MSFT 0x00000097) @ 0x1ffbe040
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: MCFG (v001 A M I  OEMMCFG  0x06000516 MSFT 0x00000097) @ 0x1ffb6b60
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: DSDT (v001  A0225 A0225001 0x00000001 INTL 0x02002026) @ 0x00000000
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x808
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: Local APIC address 0xfee00000
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct 24 01:12:02 localhost kernel: [17179569.184000] Processor #0 15:4 APIC version 20
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct 24 01:12:02 localhost kernel: [17179569.184000] Processor #1 15:4 APIC version 20
Oct 24 01:12:02 localhost kernel: [17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 24 01:12:02 localhost kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: IRQ0 used by override.
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: IRQ2 used by override.
Oct 24 01:12:02 localhost kernel: [17179569.184000] ACPI: IRQ9 used by override.
Oct 24 01:12:02 localhost kernel: [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 24 01:12:02 localhost kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Oct 24 01:12:02 localhost kernel: [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
Oct 24 01:12:02 localhost kernel: [17179569.184000] Built 1 zonelists
Oct 24 01:12:02 localhost kernel: [17179569.184000] Kernel command line: root=UUID=1f88e4d6-27c8-4656-91e4-6f7e5944422b ro quiet splash
Oct 24 01:12:02 localhost kernel: [17179569.184000] mapped APIC to ffffd000 (fee00000)
Oct 24 01:12:02 localhost kernel: [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
Oct 24 01:12:02 localhost kernel: [17179569.184000] Enabling fast FPU save and restore... done.
Oct 24 01:12:02 localhost kernel: [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
Oct 24 01:12:02 localhost kernel: [17179569.184000] Initializing CPU#0
Oct 24 01:12:02 localhost kernel: [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
Oct 24 01:12:02 localhost kernel: [17179569.184000] Detected 3011.178 MHz processor.
Oct 24 01:12:02 localhost kernel: [17179569.184000] Using pmtmr for high-res timesource
Oct 24 01:12:02 localhost kernel: [17179569.184000] Console: colour VGA+ 80x25
Oct 24 01:12:02 localhost kernel: [17179569.212000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 24 01:12:02 localhost kernel: [17179569.212000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 24 01:12:02 localhost kernel: [17179569.220000] Memory: 508692k/523968k available (1829k kernel code, 14608k reserved, 1038k data, 288k init, 0k highmem)
Oct 24 01:12:02 localhost kernel: [17179569.220000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 24 01:12:02 localhost kernel: [17179569.300000] Calibrating delay using timer specific routine.. 6028.51 BogoMIPS (lpj=12057027)
Oct 24 01:12:02 localhost kernel: [17179569.300000] Security Framework v1.0.0 initialized
Oct 24 01:12:02 localhost kernel: [17179569.300000] SELinux:  Disabled at boot.
Oct 24 01:12:02 localhost kernel: [17179569.300000] Mount-cache hash table entries: 512
Oct 24 01:12:02 localhost kernel: [17179569.300000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
Oct 24 01:12:02 localhost kernel: [17179569.300000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
Oct 24 01:12:02 localhost kernel: [17179569.300000] monitor/mwait feature present.
Oct 24 01:12:02 localhost kernel: [17179569.300000] using mwait in idle threads.
Oct 24 01:12:02 localhost kernel: [17179569.300000] CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct 24 01:12:02 localhost kernel: [17179569.300000] CPU: L2 cache: 2048K
Oct 24 01:12:02 localhost kernel: [17179569.300000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000649d 00000000 00000000
Oct 24 01:12:02 localhost kernel: [17179569.300000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Oct 24 01:12:02 localhost kernel: [17179569.300000] Checking 'hlt' instruction... OK.
Oct 24 01:12:02 localhost kernel: [17179569.316000] SMP alternatives: switching to UP code
Oct 24 01:12:02 localhost kernel: [17179569.316000] Freeing SMP alternatives: 0k freed
Oct 24 01:12:02 localhost kernel: [17179569.316000] checking if image is initramfs... it is
Oct 24 01:12:02 localhost kernel: [17179569.804000] Freeing initrd memory: 6537k freed
Oct 24 01:12:02 localhost kernel: [17179569.804000] ACPI: Core revision 20060707
Oct 24 01:12:02 localhost kernel: [17179569.804000] ACPI: Looking for DSDT ... not found!
Oct 24 01:12:02 localhost kernel: [17179569.808000] ENABLING IO-APIC IRQs
Oct 24 01:12:02 localhost kernel: [17179569.808000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 24 01:12:02 localhost kernel: [17179569.948000] NET: Registered protocol family 16
Oct 24 01:12:02 localhost kernel: [17179569.948000] EISA bus registered
Oct 24 01:12:02 localhost kernel: [17179569.948000] ACPI: bus type pci registered
Oct 24 01:12:02 localhost kernel: [17179569.948000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Oct 24 01:12:02 localhost kernel: [17179569.948000] PCI: Not using MMCONFIG.
Oct 24 01:12:02 localhost kernel: [17179569.948000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
Oct 24 01:12:02 localhost kernel: [17179569.948000] PCI: Using configuration type 1
Oct 24 01:12:02 localhost kernel: [17179569.948000] Setting up standard PCI resources
Oct 24 01:12:02 localhost kernel: [17179569.964000] ACPI: Interpreter enabled
Oct 24 01:12:02 localhost kernel: [17179569.964000] ACPI: Using IOAPIC for interrupt routing
Oct 24 01:12:02 localhost kernel: [17179569.964000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 24 01:12:02 localhost kernel: [17179569.964000] PCI: Probing PCI hardware (bus 00)
Oct 24 01:12:02 localhost kernel: [17179569.968000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Oct 24 01:12:02 localhost kernel: [17179569.968000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Oct 24 01:12:02 localhost kernel: [17179569.968000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Oct 24 01:12:02 localhost kernel: [17179569.968000] Boot video device is 0000:04:00.0
Oct 24 01:12:02 localhost kernel: [17179569.968000] PCI: Transparent bridge - 0000:00:1e.0
Oct 24 01:12:02 localhost kernel: [17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 24 01:12:02 localhost kernel: [17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Oct 24 01:12:02 localhost kernel: [17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
Oct 24 01:12:02 localhost kernel: [17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Oct 24 01:12:02 localhost kernel: [17179569.972000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 24 01:12:02 localhost kernel: [17179569.976000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 24 01:12:02 localhost kernel: [17179569.980000] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 24 01:12:02 localhost kernel: [17179569.980000] pnp: PnP ACPI init
Oct 24 01:12:02 localhost kernel: [17179569.984000] pnp: PnP ACPI: found 19 devices
Oct 24 01:12:02 localhost kernel: [17179569.984000] PnPBIOS: Disabled by ACPI PNP
Oct 24 01:12:02 localhost kernel: [17179569.984000] PCI: Using ACPI for IRQ routing
Oct 24 01:12:02 localhost kernel: [17179569.984000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Oct 24 01:12:02 localhost kernel: [17179569.996000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Bridge: 0000:00:01.0
Oct 24 01:12:02 localhost kernel: [17179569.996000]   IO window: e000-efff
Oct 24 01:12:02 localhost kernel: [17179569.996000]   MEM window: d2f00000-d7ffffff
Oct 24 01:12:02 localhost kernel: [17179569.996000]   PREFETCH window: d8000000-dfffffff
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Bridge: 0000:00:1c.0
Oct 24 01:12:02 localhost kernel: [17179569.996000]   IO window: d000-dfff
Oct 24 01:12:02 localhost kernel: [17179569.996000]   MEM window: disabled.
Oct 24 01:12:02 localhost kernel: [17179569.996000]   PREFETCH window: disabled.
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Bridge: 0000:00:1c.1
Oct 24 01:12:02 localhost kernel: [17179569.996000]   IO window: c000-cfff
Oct 24 01:12:02 localhost kernel: [17179569.996000]   MEM window: d2e00000-d2efffff
Oct 24 01:12:02 localhost kernel: [17179569.996000]   PREFETCH window: disabled.
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Bridge: 0000:00:1e.0
Oct 24 01:12:02 localhost kernel: [17179569.996000]   IO window: b000-bfff
Oct 24 01:12:02 localhost kernel: [17179569.996000]   MEM window: disabled.
Oct 24 01:12:02 localhost kernel: [17179569.996000]   PREFETCH window: disabled.
Oct 24 01:12:02 localhost kernel: [17179569.996000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Setting latency timer of device 0000:00:01.0 to 64
Oct 24 01:12:02 localhost kernel: [17179569.996000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Oct 24 01:12:02 localhost kernel: [17179569.996000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Oct 24 01:12:02 localhost kernel: [17179569.996000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Oct 24 01:12:02 localhost kernel: [17179569.996000] NET: Registered protocol family 2
Oct 24 01:12:02 localhost kernel: [17179570.036000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Oct 24 01:12:02 localhost kernel: [17179570.036000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Oct 24 01:12:02 localhost kernel: [17179570.036000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Oct 24 01:12:02 localhost kernel: [17179570.036000] TCP: Hash tables configured (established 16384 bind 8192)
Oct 24 01:12:02 localhost kernel: [17179570.036000] TCP reno registered
Oct 24 01:12:02 localhost kernel: [17179570.036000] audit: initializing netlink socket (disabled)
Oct 24 01:12:02 localhost kernel: [17179570.036000] audit(1161645101.036:1): initialized
Oct 24 01:12:02 localhost kernel: [17179570.036000] VFS: Disk quotas dquot_6.5.1
Oct 24 01:12:02 localhost kernel: [17179570.036000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 24 01:12:02 localhost kernel: [17179570.036000] Initializing Cryptographic API
Oct 24 01:12:02 localhost kernel: [17179570.036000] io scheduler noop registered
Oct 24 01:12:02 localhost kernel: [17179570.036000] io scheduler anticipatory registered
Oct 24 01:12:02 localhost kernel: [17179570.036000] io scheduler deadline registered
Oct 24 01:12:02 localhost kernel: [17179570.036000] io scheduler cfq registered (default)
Oct 24 01:12:02 localhost kernel: [17179570.036000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 01:12:02 localhost kernel: [17179570.036000] PCI: Setting latency timer of device 0000:00:01.0 to 64
Oct 24 01:12:02 localhost kernel: [17179570.036000] assign_interrupt_mode Found MSI capability
Oct 24 01:12:02 localhost kernel: [17179570.036000] Allocate Port Service[0000:00:01.0:pcie00]
Oct 24 01:12:02 localhost kernel: [17179570.036000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 01:12:02 localhost kernel: [17179570.036000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Oct 24 01:12:02 localhost kernel: [17179570.036000] assign_interrupt_mode Found MSI capability
Oct 24 01:12:02 localhost kernel: [17179570.036000] Allocate Port Service[0000:00:1c.0:pcie00]
Oct 24 01:12:02 localhost kernel: [17179570.036000] Allocate Port Service[0000:00:1c.0:pcie02]
Oct 24 01:12:02 localhost kernel: [17179570.036000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
Oct 24 01:12:02 localhost kernel: [17179570.036000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Oct 24 01:12:02 localhost kernel: [17179570.036000] assign_interrupt_mode Found MSI capability
Oct 24 01:12:02 localhost kernel: [17179570.036000] Allocate Port Service[0000:00:1c.1:pcie00]
Oct 24 01:12:02 localhost kernel: [17179570.036000] Allocate Port Service[0000:00:1c.1:pcie02]
Oct 24 01:12:02 localhost kernel: [17179570.036000] isapnp: Scanning for PnP cards...
Oct 24 01:12:02 localhost kernel: [17179570.388000] isapnp: No Plug & Play device found
Oct 24 01:12:02 localhost kernel: [17179570.408000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 24 01:12:02 localhost kernel: [17179570.408000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 24 01:12:02 localhost kernel: [17179570.408000] 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 24 01:12:02 localhost kernel: [17179570.408000] mice: PS/2 mouse device common for all mice
Oct 24 01:12:02 localhost kernel: [17179570.408000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Oct 24 01:12:02 localhost kernel: [17179570.408000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 24 01:12:02 localhost kernel: [17179570.408000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 24 01:12:02 localhost kernel: [17179570.408000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 24 01:12:02 localhost kernel: [17179570.412000] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 24 01:12:02 localhost kernel: [17179570.412000] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 24 01:12:02 localhost kernel: [17179570.412000] EISA: Probing bus 0 at eisa.0
Oct 24 01:12:02 localhost kernel: [17179570.412000] Cannot allocate resource for EISA slot 8
Oct 24 01:12:02 localhost kernel: [17179570.412000] EISA: Detected 0 cards.
Oct 24 01:12:02 localhost kernel: [17179570.412000] TCP bic registered
Oct 24 01:12:02 localhost kernel: [17179570.412000] NET: Registered protocol family 1
Oct 24 01:12:02 localhost kernel: [17179570.412000] NET: Registered protocol family 8
Oct 24 01:12:02 localhost kernel: [17179570.412000] NET: Registered protocol family 20
Oct 24 01:12:02 localhost kernel: [17179570.412000] Using IPI Shortcut mode
Oct 24 01:12:02 localhost kernel: [17179570.412000] ACPI: (supports S0 S1 S3 S4 S5)
Oct 24 01:12:02 localhost kernel: [17179570.412000] Freeing unused kernel memory: 288k freed
Oct 24 01:12:02 localhost kernel: [17179570.436000] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 24 01:12:02 localhost kernel: [17179571.480000] Capability LSM initialized
Oct 24 01:12:02 localhost kernel: [17179571.504000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
Oct 24 01:12:02 localhost kernel: [17179571.504000] ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 24 01:12:02 localhost kernel: [17179571.504000] ACPI: Getting cpuindex for acpiid 0x2
Oct 24 01:12:02 localhost kernel: [17179572.060000] ICH6: IDE controller at PCI slot 0000:00:1f.1
Oct 24 01:12:02 localhost kernel: [17179572.060000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
Oct 24 01:12:02 localhost kernel: [17179572.060000] ICH6: chipset revision 5
Oct 24 01:12:02 localhost kernel: [17179572.060000] ICH6: not 100%% native mode: will probe irqs later
Oct 24 01:12:02 localhost kernel: [17179572.060000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
Oct 24 01:12:02 localhost kernel: [17179572.060000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Oct 24 01:12:02 localhost kernel: [17179572.060000] Probing IDE interface ide0...
Oct 24 01:12:02 localhost kernel: [17179573.424000] hdb: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
Oct 24 01:12:02 localhost kernel: [17179573.480000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 24 01:12:02 localhost kernel: [17179573.480000] Probing IDE interface ide1...
Oct 24 01:12:02 localhost kernel: [17179574.052000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Oct 24 01:12:02 localhost kernel: [17179574.052000] Uniform CD-ROM driver Revision: 3.20
Oct 24 01:12:02 localhost kernel: [17179574.096000] SCSI subsystem initialized
Oct 24 01:12:02 localhost kernel: [17179574.100000] libata version 1.20 loaded.
Oct 24 01:12:02 localhost kernel: [17179574.100000] ata_piix 0000:00:1f.2: version 1.05
Oct 24 01:12:02 localhost kernel: [17179574.100000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
Oct 24 01:12:02 localhost kernel: [17179574.100000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct 24 01:12:02 localhost kernel: [17179574.100000] ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225
Oct 24 01:12:02 localhost kernel: [17179574.100000] ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225
Oct 24 01:12:02 localhost kernel: [17179574.264000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:207f
Oct 24 01:12:02 localhost kernel: [17179574.264000] ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
Oct 24 01:12:02 localhost kernel: [17179574.272000] ata1: dev 0 configured for UDMA/133
Oct 24 01:12:02 localhost kernel: [17179574.272000] scsi0 : ata_piix
Oct 24 01:12:02 localhost kernel: [17179574.436000] ata2: disabling port
Oct 24 01:12:02 localhost kernel: [17179574.436000] scsi1 : ata_piix
Oct 24 01:12:02 localhost kernel: [17179574.436000]   Vendor: ATA       Model: Maxtor 6L160M0    Rev: BANC
Oct 24 01:12:02 localhost kernel: [17179574.436000]   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct 24 01:12:02 localhost kernel: [17179574.444000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
Oct 24 01:12:02 localhost kernel: [17179574.444000] sda: Write Protect is off
Oct 24 01:12:02 localhost kernel: [17179574.444000] sda: Mode Sense: 00 3a 00 00
Oct 24 01:12:02 localhost kernel: [17179574.444000] SCSI device sda: drive cache: write back
Oct 24 01:12:02 localhost kernel: [17179574.444000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
Oct 24 01:12:02 localhost kernel: [17179574.444000] sda: Write Protect is off
Oct 24 01:12:02 localhost kernel: [17179574.444000] sda: Mode Sense: 00 3a 00 00
Oct 24 01:12:02 localhost kernel: [17179574.444000] SCSI device sda: drive cache: write back
Oct 24 01:12:02 localhost kernel: [17179574.444000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Oct 24 01:12:02 localhost kernel: [17179574.540000] sd 0:0:0:0: Attached scsi disk sda
Oct 24 01:12:02 localhost kernel: [17179575.028000] Probing IDE interface ide1...
Oct 24 01:12:02 localhost kernel: [17179575.068000] usbcore: registered new driver usbfs
Oct 24 01:12:02 localhost kernel: [17179575.068000] usbcore: registered new driver hub
Oct 24 01:12:02 localhost kernel: [17179575.068000] USB Universal Host Controller Interface driver v3.0
Oct 24 01:12:02 localhost kernel: [17179575.072000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Oct 24 01:12:02 localhost kernel: [17179575.072000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Oct 24 01:12:02 localhost kernel: [17179575.072000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 24 01:12:02 localhost kernel: [17179575.072000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Oct 24 01:12:02 localhost kernel: [17179575.072000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000
Oct 24 01:12:02 localhost kernel: [17179575.072000] usb usb1: configuration #1 chosen from 1 choice
Oct 24 01:12:02 localhost kernel: [17179575.072000] hub 1-0:1.0: USB hub found
Oct 24 01:12:02 localhost kernel: [17179575.072000] hub 1-0:1.0: 2 ports detected
Oct 24 01:12:02 localhost kernel: [17179575.176000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
Oct 24 01:12:02 localhost kernel: [17179575.176000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Oct 24 01:12:02 localhost kernel: [17179575.176000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 24 01:12:02 localhost kernel: [17179575.176000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Oct 24 01:12:02 localhost kernel: [17179575.176000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00008400
Oct 24 01:12:02 localhost kernel: [17179575.176000] usb usb2: configuration #1 chosen from 1 choice
Oct 24 01:12:02 localhost kernel: [17179575.176000] hub 2-0:1.0: USB hub found
Oct 24 01:12:02 localhost kernel: [17179575.176000] hub 2-0:1.0: 2 ports detected
Oct 24 01:12:02 localhost kernel: [17179575.280000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
Oct 24 01:12:02 localhost kernel: [17179575.280000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Oct 24 01:12:02 localhost kernel: [17179575.280000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 24 01:12:02 localhost kernel: [17179575.280000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Oct 24 01:12:02 localhost kernel: [17179575.280000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x00008800
Oct 24 01:12:02 localhost kernel: [17179575.280000] usb usb3: configuration #1 chosen from 1 choice
Oct 24 01:12:02 localhost kernel: [17179575.280000] hub 3-0:1.0: USB hub found
Oct 24 01:12:02 localhost kernel: [17179575.280000] hub 3-0:1.0: 2 ports detected
Oct 24 01:12:02 localhost kernel: [17179575.384000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
Oct 24 01:12:02 localhost kernel: [17179575.384000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Oct 24 01:12:02 localhost kernel: [17179575.384000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct 24 01:12:02 localhost kernel: [17179575.384000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Oct 24 01:12:02 localhost kernel: [17179575.384000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00009000
Oct 24 01:12:02 localhost kernel: [17179575.384000] usb usb4: configuration #1 chosen from 1 choice
Oct 24 01:12:02 localhost kernel: [17179575.384000] hub 4-0:1.0: USB hub found
Oct 24 01:12:02 localhost kernel: [17179575.384000] hub 4-0:1.0: 2 ports detected
Oct 24 01:12:02 localhost kernel: [17179575.488000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Oct 24 01:12:02 localhost kernel: [17179575.488000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Oct 24 01:12:02 localhost kernel: [17179575.488000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 24 01:12:02 localhost kernel: [17179575.488000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Oct 24 01:12:02 localhost kernel: [17179575.488000] ehci_hcd 0000:00:1d.7: debug port 1
Oct 24 01:12:02 localhost kernel: [17179575.488000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Oct 24 01:12:02 localhost kernel: [17179575.488000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2dffc00
Oct 24 01:12:02 localhost kernel: [17179575.492000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 24 01:12:02 localhost kernel: [17179575.492000] usb usb5: configuration #1 chosen from 1 choice
Oct 24 01:12:02 localhost kernel: [17179575.492000] hub 5-0:1.0: USB hub found
Oct 24 01:12:02 localhost kernel: [17179575.492000] hub 5-0:1.0: 8 ports detected
Oct 24 01:12:02 localhost kernel: [17179575.520000] usb 2-2: new full speed USB device using uhci_hcd and address 2
Oct 24 01:12:02 localhost kernel: [17179575.720000] kjournald starting.  Commit interval 5 seconds
Oct 24 01:12:02 localhost kernel: [17179575.720000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 24 01:12:02 localhost kernel: [17179576.024000] usb 2-2: new full speed USB device using uhci_hcd and address 3
Oct 24 01:12:02 localhost kernel: [17179576.212000] usb 2-2: configuration #1 chosen from 1 choice
Oct 24 01:12:02 localhost kernel: [17179584.428000] Real Time Clock Driver v1.12ac
Oct 24 01:12:02 localhost kernel: [17179584.616000] input: PC Speaker as /class/input/input1
Oct 24 01:12:02 localhost kernel: [17179584.624000] hw_random hardware driver 1.0.0 loaded
Oct 24 01:12:02 localhost kernel: [17179584.684000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 24 01:12:02 localhost kernel: [17179584.688000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 24 01:12:02 localhost kernel: [17179584.748000] Linux agpgart interface v0.101 (c) Dave Jones
Oct 24 01:12:02 localhost kernel: [17179584.752000] agpgart: Detected an Intel 915G Chipset.
Oct 24 01:12:02 localhost kernel: [17179584.768000] agpgart: AGP aperture is 256M @ 0x0
Oct 24 01:12:02 localhost kernel: [17179585.100000] Floppy drive(s): fd0 is 1.44M
Oct 24 01:12:02 localhost kernel: [17179585.120000] FDC 0 is a post-1991 82077
Oct 24 01:12:02 localhost kernel: [17179585.248000] parport: PnPBIOS parport detected.
Oct 24 01:12:02 localhost kernel: [17179585.248000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Oct 24 01:12:02 localhost kernel: [17179585.308000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 24 01:12:02 localhost kernel: [17179585.308000] PCI: Setting latency timer of device 0000:02:00.0 to 64
Oct 24 01:12:02 localhost kernel: [17179585.308000] sky2 v1.6.1 addr 0xd2efc000 irq 177 Yukon-EC (0xb6) rev 2
Oct 24 01:12:02 localhost kernel: [17179585.308000] sky2 eth0: addr 00:13:d4:7f:a5:05
Oct 24 01:12:02 localhost kernel: [17179586.520000] sky2 eth0: enabling interface
Oct 24 01:12:02 localhost kernel: [17179586.620000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 24 01:12:02 localhost kernel: [17179586.640000] logips2pp: Detected unknown logitech mouse model 62
Oct 24 01:12:02 localhost kernel: [17179586.656000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0817
Oct 24 01:12:02 localhost kernel: [17179586.656000] usbcore: registered new driver usblp
Oct 24 01:12:02 localhost kernel: [17179586.656000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Oct 24 01:12:02 localhost kernel: [17179586.792000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 24 01:12:02 localhost kernel: [17179587.088000] nvidia: module license 'NVIDIA' taints kernel.
Oct 24 01:12:02 localhost kernel: [17179587.340000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 01:12:02 localhost kernel: [17179587.340000] PCI: Setting latency timer of device 0000:04:00.0 to 64
Oct 24 01:12:02 localhost kernel: [17179587.340000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9625  Thu Sep 14 15:33:21 PDT 2006
Oct 24 01:12:02 localhost kernel: [17179587.384000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
Oct 24 01:12:02 localhost kernel: [17179587.400000] ts: Compaq touchscreen protocol output
Oct 24 01:12:02 localhost kernel: [17179587.624000] Intel ISA PCIC probe: not found.
Oct 24 01:12:02 localhost kernel: [17179587.700000] lp0: using parport0 (interrupt-driven).
Oct 24 01:12:02 localhost kernel: [17179587.760000] fuse init (API version 7.6)
Oct 24 01:12:02 localhost kernel: [17179587.796000] Adding 1461872k swap on /dev/sda7.  Priority:-1 extents:1 across:1461872k
Oct 24 01:12:02 localhost kernel: [17179587.868000] EXT3 FS on sda5, internal journal
Oct 24 01:12:02 localhost kernel: [17179587.964000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Oct 24 01:12:02 localhost kernel: [17179588.044000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 24 01:12:02 localhost kernel: [17179588.044000] md: bitmap version 4.39
Oct 24 01:12:02 localhost kernel: [17179588.208000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 24 01:12:02 localhost kernel: [17179589.156000] NET: Registered protocol family 10
Oct 24 01:12:02 localhost kernel: [17179589.156000] lo: Disabled Privacy Extensions
Oct 24 01:12:02 localhost kernel: [17179589.156000] IPv6 over IPv4 tunneling driver
Oct 24 01:12:02 localhost kernel: [17179589.208000] kjournald starting.  Commit interval 5 seconds
Oct 24 01:12:02 localhost kernel: [17179589.216000] EXT3 FS on sda6, internal journal
Oct 24 01:12:02 localhost kernel: [17179589.216000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 24 01:12:02 localhost kernel: [17179589.248000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Oct 24 01:12:02 localhost kernel: [17179589.360000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Oct 24 01:12:02 localhost kernel: [17179590.472000] ACPI: Power Button (FF) [PWRF]
Oct 24 01:12:02 localhost kernel: [17179590.472000] ACPI: Power Button (CM) [PWRB]
Oct 24 01:12:02 localhost kernel: [17179590.548000] ibm_acpi: ec object not found
Oct 24 01:12:02 localhost kernel: [17179590.576000] pcc_acpi: loading...
Oct 24 01:12:09 localhost kernel: [17179597.356000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 24 01:12:09 localhost kernel: [17179597.356000] apm: overridden by ACPI.
Oct 24 01:12:11 localhost kernel: [17179599.272000] eth0: no IPv6 routers present
Oct 24 01:12:11 localhost kernel: [17179599.288000] Bluetooth: Core ver 2.8
Oct 24 01:12:11 localhost kernel: [17179599.288000] NET: Registered protocol family 31
Oct 24 01:12:11 localhost kernel: [17179599.288000] Bluetooth: HCI device and connection manager initialized
Oct 24 01:12:11 localhost kernel: [17179599.288000] Bluetooth: HCI socket layer initialized
Oct 24 01:12:11 localhost kernel: [17179599.308000] Bluetooth: L2CAP ver 2.8
Oct 24 01:12:11 localhost kernel: [17179599.308000] Bluetooth: L2CAP socket layer initialized
Oct 24 01:12:11 localhost kernel: [17179599.312000] Bluetooth: RFCOMM socket layer initialized
Oct 24 01:12:11 localhost kernel: [17179599.312000] Bluetooth: RFCOMM TTY layer initialized
Oct 24 01:12:11 localhost kernel: [17179599.312000] Bluetooth: RFCOMM ver 1.7

Tao · Le 24/10/2006, à 00:37

Rien de bien concluant pour le moment. Peut-être dans le fichier /var/log/udev.log vu qu'il était aussi question de udev dans ton post initial.

jmtt · Le 24/10/2006, à 00:56

A vos ordres chefs

Merci encore, Tao, de te pencher sur ce point de détail. Mes salutations à Pitchou.

udevmonitor prints the received event from the kernel [UEVENT]
and the event which udev sends out after r:)ule processing [UDEV]

UEVENT[1161645114.749391] add@/class/mem/full
UDEV  [1161645114.749391] add@/class/mem/full
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/full
SUBSYSTEM=mem
SEQNUM=1511
MAJOR=1
MINOR=7
UDEVD_EVENT=1
DEVNAME=/dev/full

UEVENT[1161645114.749599] add@/class/mem/kmsg
UDEV  [1161645114.749599] add@/class/mem/kmsg
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/kmsg
SUBSYSTEM=mem
SEQNUM=1512
MAJOR=1
MINOR=11
UDEVD_EVENT=1
DEVNAME=/dev/kmsg

UEVENT[1161645114.749711] add@/class/mem/mem
UDEV  [1161645114.749711] add@/class/mem/mem
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/mem
SUBSYSTEM=mem
SEQNUM=1513
MAJOR=1
MINOR=1
UDEVD_EVENT=1
DEVNAME=/dev/mem

UEVENT[1161645114.749820] add@/class/mem/null
UDEV  [1161645114.749820] add@/class/mem/null
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/null
SUBSYSTEM=mem
SEQNUM=1514
MAJOR=1
MINOR=3
UDEVD_EVENT=1
DEVNAME=/dev/null

UEVENT[1161645114.749831] add@/class/mem/port
UDEV  [1161645114.749831] add@/class/mem/port
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/port
SUBSYSTEM=mem
SEQNUM=1515
MAJOR=1
MINOR=4
UDEVD_EVENT=1
DEVNAME=/dev/port

UEVENT[1161645114.749840] add@/class/mem/random
UDEV  [1161645114.749840] add@/class/mem/random
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/random
SUBSYSTEM=mem
SEQNUM=1516
MAJOR=1
MINOR=8
UDEVD_EVENT=1
DEVNAME=/dev/random

UEVENT[1161645114.749848] add@/class/mem/urandom
UDEV  [1161645114.749848] add@/class/mem/urandom
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/urandom
SUBSYSTEM=mem
SEQNUM=1517
MAJOR=1
MINOR=9
UDEVD_EVENT=1
DEVNAME=/dev/urandom

UEVENT[1161645114.749856] add@/class/mem/zero
UDEV  [1161645114.749856] add@/class/mem/zero
UDEV_LOG=3
ACTION=add
DEVPATH=/class/mem/zero
SUBSYSTEM=mem
SEQNUM=1518
MAJOR=1
MINOR=5
UDEVD_EVENT=1
DEVNAME=/dev/zero

UEVENT[1161645114.749864] add@/class/tty/console
UDEV  [1161645114.749864] add@/class/tty/console
UDEV_LOG=3
ACTION=add
DEVPATH=/class/tty/console
SUBSYSTEM=tty
SEQNUM=1519
MAJOR=5
MINOR=1
UDEVD_EVENT=1
DEVNAME=/dev/console

UEVENT[1161645114.749872] add@/class/tty/ptmx
UDEV  [1161645114.749872] add@/class/tty/ptmx
UDEV_LOG=3
ACTION=add
DEVPATH=/class/tty/ptmx
SUBSYSTEM=tty
SEQNUM=1520
MAJOR=5
MINOR=2
UDEVD_EVENT=1
DEVNAME=/dev/ptmx

UEVENT[1161645114.749880] add@/class/tty/ptya0
UDEV  [1161645114.749880] add@/class/tty/ptya0
UDEV_LOG=3
ACTION=add
DEVPATH=/class/tty/ptya0
SUBSYSTEM=tty
SEQNUM=1521
MAJOR=2
MINOR=176
UDEVD_EVENT=1
DEVNAME=/dev/ptya0

Manque la fin, pour pb de place, mais elle n'affiche rien de choquant.

Tao · Le 24/10/2006, à 01:19

jmtt a écrit :

Merci encore, Tao, de te pencher sur ce point de détail.

Ne me remercie pas trop vite, parce que ce n'est pas sûr que je puisse résoudre ton problème. Je dirais même qu'il te faudra probablement l'aide de quelqu'un d'autre car je ne vois toujours pas la source de ton problème.

Sans grandes convictions, tu peux toujours tenter "sudo dpkg-reconfigure udev"

Tao · Le 24/10/2006, à 01:27

encore un peu de renseignements : que dit le fichier /var/log/messages ?
Et "dpkg -l *fuse*" ?

jmtt · Le 24/10/2006, à 01:30

Ne me remercie pas trop vite, parce que ce n'est pas sûr que je puisse résoudre ton problème. Je dirais même qu'il te faudra probablement l'aide de quelqu'un d'autre car je ne vois toujours pas la source de ton problème.

Pas grave, je remercie le geste, comme le résultat n'a pas une importance cruciale. J'ai un autre pc où le boot graphique d'edgy marche, et c'est tellement tendant vers la version windows, que ça me dérange pas vraiment que ça merde sur celui-ci.
Je fouille juste le pb par curiosité, et au cas où quelqu'un ait ce souci et prenne la peine de trouver ce post par une recherche.

Off pour ce soir ++

Dernière modification par jmtt (Le 24/10/2006, à 01:31)

Tao · Le 24/10/2006, à 01:31

Il pourrait y avoir des choses intéressantes ici : http://lists.debian.org/debian-user/200 … 02129.html

Lis avec moi...

jmtt · Le 24/10/2006, à 01:32

Je lirais demain.

Tao · Le 24/10/2006, à 01:32

et ça : https://www.redhat.com/archives/fedora- … 00160.html

Ce qui m'amène à te demander le contenu du fichier /etc/udev/rules.d/40-fuse.rules

Tao · Le 24/10/2006, à 01:37

En fait édite le fichier /etc/udev/rules.d/40-fuse.rules et remplace son contenu par :

KERNEL=="fuse", GROUP=="fuse"

(en fait j'ai juste ajouté un = )

Dernière modification par Tao (Le 24/10/2006, à 01:37)

jmtt · Le 24/10/2006, à 12:44

Bien trouvé, Tao,
J'avais fait un peu de recherche sur google mais n'ai trouvé que des pages en russe, langue que je ne maitrise pas.

Mon /etc/udev/rules.d/40-fuse.rules contient ça a présent :

KERNEL=="fuse", GROUP=="fuse", NAME="%k", MODE="0666"

Du coup, les messages :
[des chiffres] add to rule : invalid kernel operation
[des chiffres] /etc/udev/rules.d/40-fuse.rules:1'
n'apparaissent plus.

Ce pb semble donc correctement réglé.

Par contre le démarrage graphique plante toujours, avec la ligne :

[17179574.764000] ata2: disabling port

Pas à pas, on avance dans la bonne direction.

Dernière modification par jmtt (Le 24/10/2006, à 13:14)

Tao · Le 24/10/2006, à 15:03

On avance oui!

Par curiosité il y avait quoi dans ce fichier avant que tu l'édites? Parce que moi il n'y avait ni name, ni mode. S'il n'y avait qu'un = après kernel, laisse le deuxième que tu as ajouté mais retire le deuxième de group.

pour le "ata2: disabling port" je sèche un peu... Tes disques fonctionnent quand même parfaitement?

jmtt · Le 24/10/2006, à 15:38

Il y avait :

KERNEL="fuse", NAME="%k", MODE="0666"

mais cette modif a eu un effet positif, comme dit ci-dessus.

Il n'y a qu'un seul disque, et oui il marche bien, je monte correctement les différentes partitions y compris ext2 et fat.

Tao · Le 24/10/2006, à 15:44

dans ce cas remplace plutôt par :

KERNEL=="fuse", NAME="%k", MODE="0666"

Pour éviter de changer plus qu'il ne le faut.

Pour le ata2, je ne vois toujours pas. Je dirais même que ce n'est pas certain que ce soit ça l'erreur que te fais perdre le boot graphique car ça ne ressemble pas vraiment à une erreur. Ça reste bloqué un moment juste avant ou juste après l'apparition de ce message?

jmtt · Le 24/10/2006, à 15:56

e dirais même que ce n'est pas certain que ce soit ça l'erreur que te fais perdre le boot graphique car ça ne ressemble pas vraiment à une erreur.

Oui, Tao, c'est ce que je me dis aussi.

Le flash d'écran (plantage de boot graphique) a lieu avant l'apparition de ce message et dure environ 3 secondes grosso modo.

Tao · Le 24/10/2006, à 16:36

Sinon tu n'as pas donné ton /var/log/messages des fois que l'explication soit là!

jmtt · Le 24/10/2006, à 16:57

/var/log/messages

Oct 24 16:24:04 localhost syslogd 1.4.1#18ubuntu6: restart.
Oct 24 16:24:04 localhost kernel: Inspecting /boot/System.map-2.6.17-10-386
Oct 24 16:24:09 localhost kernel: Loaded 22425 symbols from /boot/System.map-2.6.17-10-386.
Oct 24 16:24:09 localhost kernel: Symbols match kernel version 2.6.17.
Oct 24 16:24:09 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Oct 24 16:24:09 localhost kernel: [17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
Oct 24 16:24:09 localhost kernel: [17179569.184000] BIOS-provided physical RAM map:
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 000000001ffbe000 - 000000001fff0000 (ACPI NVS)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
Oct 24 16:24:09 localhost kernel: [17179569.184000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Oct 24 16:24:09 localhost kernel: [17179569.184000] 0MB HIGHMEM available.
Oct 24 16:24:09 localhost kernel: [17179569.184000] 511MB LOWMEM available.
Oct 24 16:24:09 localhost kernel: [17179569.184000] found SMP MP-table at 000ff780
Oct 24 16:24:09 localhost kernel: [17179569.184000] DMI 2.3 present.
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x808
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct 24 16:24:09 localhost kernel: [17179569.184000] Processor #0 15:4 APIC version 20
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct 24 16:24:09 localhost kernel: [17179569.184000] Processor #1 15:4 APIC version 20
Oct 24 16:24:09 localhost kernel: [17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 24 16:24:09 localhost kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 24 16:24:09 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 24 16:24:09 localhost kernel: [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 24 16:24:09 localhost kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Oct 24 16:24:09 localhost kernel: [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
Oct 24 16:24:09 localhost kernel: [17179569.184000] Built 1 zonelists
Oct 24 16:24:09 localhost kernel: [17179569.184000] Kernel command line: root=UUID=1f88e4d6-27c8-4656-91e4-6f7e5944422b ro quiet splash
Oct 24 16:24:09 localhost kernel: [17179569.184000] Enabling fast FPU save and restore... done.
Oct 24 16:24:09 localhost kernel: [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
Oct 24 16:24:09 localhost kernel: [17179569.184000] Initializing CPU#0
Oct 24 16:24:09 localhost kernel: [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
Oct 24 16:24:09 localhost kernel: [17179569.184000] Detected 3011.317 MHz processor.
Oct 24 16:24:09 localhost kernel: [17179569.184000] Using pmtmr for high-res timesource
Oct 24 16:24:09 localhost kernel: [17179569.184000] Console: colour VGA+ 80x25
Oct 24 16:24:09 localhost kernel: [17179571.804000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 24 16:24:09 localhost kernel: [17179571.804000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 24 16:24:09 localhost kernel: [17179571.812000] Memory: 508692k/523968k available (1829k kernel code, 14608k reserved, 1038k data, 288k init, 0k highmem)
Oct 24 16:24:09 localhost kernel: [17179571.812000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 24 16:24:09 localhost kernel: [17179571.892000] Calibrating delay using timer specific routine.. 6028.50 BogoMIPS (lpj=12057009)
Oct 24 16:24:09 localhost kernel: [17179571.892000] Security Framework v1.0.0 initialized
Oct 24 16:24:09 localhost kernel: [17179571.892000] SELinux:  Disabled at boot.
Oct 24 16:24:09 localhost kernel: [17179571.892000] Mount-cache hash table entries: 512
Oct 24 16:24:09 localhost kernel: [17179571.892000] monitor/mwait feature present.
Oct 24 16:24:09 localhost kernel: [17179571.892000] using mwait in idle threads.
Oct 24 16:24:09 localhost kernel: [17179571.892000] CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct 24 16:24:09 localhost kernel: [17179571.892000] CPU: L2 cache: 2048K
Oct 24 16:24:09 localhost kernel: [17179571.892000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Oct 24 16:24:09 localhost kernel: [17179571.892000] Checking 'hlt' instruction... OK.
Oct 24 16:24:09 localhost kernel: [17179571.908000] SMP alternatives: switching to UP code
Oct 24 16:24:09 localhost kernel: [17179571.908000] Freeing SMP alternatives: 0k freed
Oct 24 16:24:09 localhost kernel: [17179571.908000] checking if image is initramfs... it is
Oct 24 16:24:09 localhost kernel: [17179572.396000] Freeing initrd memory: 6537k freed
Oct 24 16:24:09 localhost kernel: [17179572.396000] ACPI: Core revision 20060707
Oct 24 16:24:09 localhost kernel: [17179572.396000] ACPI: Looking for DSDT ... not found!
Oct 24 16:24:09 localhost kernel: [17179572.400000] ENABLING IO-APIC IRQs
Oct 24 16:24:09 localhost kernel: [17179572.400000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 24 16:24:09 localhost kernel: [17179572.544000] NET: Registered protocol family 16
Oct 24 16:24:09 localhost kernel: [17179572.544000] EISA bus registered
Oct 24 16:24:09 localhost kernel: [17179572.544000] ACPI: bus type pci registered
Oct 24 16:24:09 localhost kernel: [17179572.544000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Oct 24 16:24:09 localhost kernel: [17179572.544000] PCI: Not using MMCONFIG.
Oct 24 16:24:09 localhost kernel: [17179572.544000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
Oct 24 16:24:09 localhost kernel: [17179572.544000] PCI: Using configuration type 1
Oct 24 16:24:09 localhost kernel: [17179572.544000] Setting up standard PCI resources
Oct 24 16:24:09 localhost kernel: [17179572.560000] ACPI: Interpreter enabled
Oct 24 16:24:09 localhost kernel: [17179572.560000] ACPI: Using IOAPIC for interrupt routing
Oct 24 16:24:09 localhost kernel: [17179572.560000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 24 16:24:09 localhost kernel: [17179572.564000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Oct 24 16:24:09 localhost kernel: [17179572.564000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Oct 24 16:24:09 localhost kernel: [17179572.564000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Oct 24 16:24:09 localhost kernel: [17179572.564000] PCI: Transparent bridge - 0000:00:1e.0
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 24 16:24:09 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 24 16:24:09 localhost kernel: [17179572.576000] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 24 16:24:09 localhost kernel: [17179572.576000] pnp: PnP ACPI init
Oct 24 16:24:09 localhost kernel: [17179572.580000] pnp: PnP ACPI: found 19 devices
Oct 24 16:24:09 localhost kernel: [17179572.580000] PnPBIOS: Disabled by ACPI PNP
Oct 24 16:24:09 localhost kernel: [17179572.580000] PCI: Using ACPI for IRQ routing
Oct 24 16:24:09 localhost kernel: [17179572.580000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Oct 24 16:24:09 localhost kernel: [17179572.592000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
Oct 24 16:24:09 localhost kernel: [17179572.592000] PCI: Bridge: 0000:00:01.0
Oct 24 16:24:09 localhost kernel: [17179572.592000]   IO window: e000-efff
Oct 24 16:24:09 localhost kernel: [17179572.592000]   MEM window: d2f00000-d7ffffff
Oct 24 16:24:09 localhost kernel: [17179572.592000]   PREFETCH window: d8000000-dfffffff
Oct 24 16:24:09 localhost kernel: [17179572.592000] PCI: Bridge: 0000:00:1c.0
Oct 24 16:24:09 localhost kernel: [17179572.592000]   IO window: d000-dfff
Oct 24 16:24:09 localhost kernel: [17179572.592000]   MEM window: disabled.
Oct 24 16:24:09 localhost kernel: [17179572.592000]   PREFETCH window: disabled.
Oct 24 16:24:09 localhost kernel: [17179572.592000] PCI: Bridge: 0000:00:1c.1
Oct 24 16:24:09 localhost kernel: [17179572.592000]   IO window: c000-cfff
Oct 24 16:24:09 localhost kernel: [17179572.592000]   MEM window: d2e00000-d2efffff
Oct 24 16:24:09 localhost kernel: [17179572.592000]   PREFETCH window: disabled.
Oct 24 16:24:09 localhost kernel: [17179572.592000] PCI: Bridge: 0000:00:1e.0
Oct 24 16:24:09 localhost kernel: [17179572.592000]   IO window: b000-bfff
Oct 24 16:24:09 localhost kernel: [17179572.592000]   MEM window: disabled.
Oct 24 16:24:09 localhost kernel: [17179572.592000]   PREFETCH window: disabled.
Oct 24 16:24:09 localhost kernel: [17179572.592000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 16:24:09 localhost kernel: [17179572.592000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 16:24:09 localhost kernel: [17179572.592000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
Oct 24 16:24:09 localhost kernel: [17179572.592000] NET: Registered protocol family 2
Oct 24 16:24:09 localhost kernel: [17179572.632000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Oct 24 16:24:09 localhost kernel: [17179572.632000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Oct 24 16:24:09 localhost kernel: [17179572.632000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Oct 24 16:24:09 localhost kernel: [17179572.632000] TCP: Hash tables configured (established 16384 bind 8192)
Oct 24 16:24:09 localhost kernel: [17179572.632000] TCP reno registered
Oct 24 16:24:09 localhost kernel: [17179572.632000] audit: initializing netlink socket (disabled)
Oct 24 16:24:09 localhost kernel: [17179572.632000] audit(1161699830.632:1): initialized
Oct 24 16:24:09 localhost kernel: [17179572.632000] VFS: Disk quotas dquot_6.5.1
Oct 24 16:24:09 localhost kernel: [17179572.632000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 24 16:24:09 localhost kernel: [17179572.632000] Initializing Cryptographic API
Oct 24 16:24:09 localhost kernel: [17179572.632000] io scheduler noop registered
Oct 24 16:24:09 localhost kernel: [17179572.632000] io scheduler anticipatory registered
Oct 24 16:24:09 localhost kernel: [17179572.632000] io scheduler deadline registered
Oct 24 16:24:09 localhost kernel: [17179572.632000] io scheduler cfq registered (default)
Oct 24 16:24:09 localhost kernel: [17179572.632000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 16:24:09 localhost kernel: [17179572.632000] assign_interrupt_mode Found MSI capability
Oct 24 16:24:09 localhost kernel: [17179572.632000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 16:24:09 localhost kernel: [17179572.632000] assign_interrupt_mode Found MSI capability
Oct 24 16:24:09 localhost kernel: [17179572.632000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
Oct 24 16:24:09 localhost kernel: [17179572.632000] assign_interrupt_mode Found MSI capability
Oct 24 16:24:09 localhost kernel: [17179572.632000] isapnp: Scanning for PnP cards...
Oct 24 16:24:09 localhost kernel: [17179572.984000] isapnp: No Plug & Play device found
Oct 24 16:24:09 localhost kernel: [17179573.004000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 24 16:24:09 localhost kernel: [17179573.004000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 24 16:24:09 localhost kernel: [17179573.004000] 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 24 16:24:09 localhost kernel: [17179573.004000] mice: PS/2 mouse device common for all mice
Oct 24 16:24:09 localhost kernel: [17179573.004000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Oct 24 16:24:09 localhost kernel: [17179573.004000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 24 16:24:09 localhost kernel: [17179573.004000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 24 16:24:09 localhost kernel: [17179573.004000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 24 16:24:09 localhost kernel: [17179573.008000] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 24 16:24:09 localhost kernel: [17179573.008000] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 24 16:24:09 localhost kernel: [17179573.008000] EISA: Probing bus 0 at eisa.0
Oct 24 16:24:09 localhost kernel: [17179573.008000] Cannot allocate resource for EISA slot 8
Oct 24 16:24:09 localhost kernel: [17179573.008000] EISA: Detected 0 cards.
Oct 24 16:24:09 localhost kernel: [17179573.008000] TCP bic registered
Oct 24 16:24:09 localhost kernel: [17179573.008000] NET: Registered protocol family 1
Oct 24 16:24:09 localhost kernel: [17179573.008000] NET: Registered protocol family 8
Oct 24 16:24:09 localhost kernel: [17179573.008000] NET: Registered protocol family 20
Oct 24 16:24:09 localhost kernel: [17179573.008000] Using IPI Shortcut mode
Oct 24 16:24:09 localhost kernel: [17179573.008000] ACPI: (supports S0 S1 S3 S4 S5)
Oct 24 16:24:09 localhost kernel: [17179573.008000] Freeing unused kernel memory: 288k freed
Oct 24 16:24:09 localhost kernel: [17179573.032000] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 24 16:24:09 localhost kernel: [17179574.076000] Capability LSM initialized
Oct 24 16:24:09 localhost kernel: [17179574.100000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
Oct 24 16:24:09 localhost kernel: [17179574.100000] ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 24 16:24:09 localhost kernel: [17179574.652000] ICH6: IDE controller at PCI slot 0000:00:1f.1
Oct 24 16:24:09 localhost kernel: [17179574.652000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
Oct 24 16:24:09 localhost kernel: [17179574.652000] ICH6: chipset revision 5
Oct 24 16:24:09 localhost kernel: [17179574.652000] ICH6: not 100%% native mode: will probe irqs later
Oct 24 16:24:09 localhost kernel: [17179574.652000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
Oct 24 16:24:09 localhost kernel: [17179574.652000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Oct 24 16:24:09 localhost kernel: [17179576.032000] hdb: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
Oct 24 16:24:09 localhost kernel: [17179576.088000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 24 16:24:09 localhost kernel: [17179576.660000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Oct 24 16:24:09 localhost kernel: [17179576.660000] Uniform CD-ROM driver Revision: 3.20
Oct 24 16:24:09 localhost kernel: [17179576.708000] SCSI subsystem initialized
Oct 24 16:24:09 localhost kernel: [17179576.712000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
Oct 24 16:24:09 localhost kernel: [17179576.712000] ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225
Oct 24 16:24:09 localhost kernel: [17179576.712000] ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225
Oct 24 16:24:09 localhost kernel: [17179576.876000] ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
Oct 24 16:24:09 localhost kernel: [17179576.884000] ata1: dev 0 configured for UDMA/133
Oct 24 16:24:09 localhost kernel: [17179576.884000] scsi0 : ata_piix
Oct 24 16:24:09 localhost kernel: [17179577.048000] scsi1 : ata_piix
Oct 24 16:24:09 localhost kernel: [17179577.048000]   Vendor: ATA       Model: Maxtor 6L160M0    Rev: BANC
Oct 24 16:24:09 localhost kernel: [17179577.048000]   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct 24 16:24:09 localhost kernel: [17179577.056000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
Oct 24 16:24:09 localhost kernel: [17179577.056000] sda: Write Protect is off
Oct 24 16:24:09 localhost kernel: [17179577.056000] SCSI device sda: drive cache: write back
Oct 24 16:24:09 localhost kernel: [17179577.056000] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
Oct 24 16:24:09 localhost kernel: [17179577.056000] sda: Write Protect is off
Oct 24 16:24:09 localhost kernel: [17179577.056000] SCSI device sda: drive cache: write back
Oct 24 16:24:09 localhost kernel: [17179577.056000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Oct 24 16:24:09 localhost kernel: [17179577.140000] sd 0:0:0:0: Attached scsi disk sda
Oct 24 16:24:09 localhost kernel: [17179577.784000] usbcore: registered new driver usbfs
Oct 24 16:24:09 localhost kernel: [17179577.784000] usbcore: registered new driver hub
Oct 24 16:24:09 localhost kernel: [17179577.784000] USB Universal Host Controller Interface driver v3.0
Oct 24 16:24:09 localhost kernel: [17179577.788000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Oct 24 16:24:09 localhost kernel: [17179577.788000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 24 16:24:09 localhost kernel: [17179577.788000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Oct 24 16:24:09 localhost kernel: [17179577.788000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000
Oct 24 16:24:09 localhost kernel: [17179577.788000] usb usb1: configuration #1 chosen from 1 choice
Oct 24 16:24:09 localhost kernel: [17179577.788000] hub 1-0:1.0: USB hub found
Oct 24 16:24:09 localhost kernel: [17179577.788000] hub 1-0:1.0: 2 ports detected
Oct 24 16:24:09 localhost kernel: [17179577.892000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
Oct 24 16:24:09 localhost kernel: [17179577.892000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 24 16:24:09 localhost kernel: [17179577.892000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Oct 24 16:24:09 localhost kernel: [17179577.892000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00008400
Oct 24 16:24:09 localhost kernel: [17179577.892000] usb usb2: configuration #1 chosen from 1 choice
Oct 24 16:24:09 localhost kernel: [17179577.892000] hub 2-0:1.0: USB hub found
Oct 24 16:24:09 localhost kernel: [17179577.892000] hub 2-0:1.0: 2 ports detected
Oct 24 16:24:09 localhost kernel: [17179577.996000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
Oct 24 16:24:09 localhost kernel: [17179577.996000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 24 16:24:09 localhost kernel: [17179577.996000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Oct 24 16:24:09 localhost kernel: [17179577.996000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x00008800
Oct 24 16:24:09 localhost kernel: [17179577.996000] usb usb3: configuration #1 chosen from 1 choice
Oct 24 16:24:09 localhost kernel: [17179577.996000] hub 3-0:1.0: USB hub found
Oct 24 16:24:09 localhost kernel: [17179577.996000] hub 3-0:1.0: 2 ports detected
Oct 24 16:24:09 localhost kernel: [17179578.100000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
Oct 24 16:24:09 localhost kernel: [17179578.100000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct 24 16:24:09 localhost kernel: [17179578.100000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Oct 24 16:24:09 localhost kernel: [17179578.100000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00009000
Oct 24 16:24:09 localhost kernel: [17179578.100000] usb usb4: configuration #1 chosen from 1 choice
Oct 24 16:24:09 localhost kernel: [17179578.100000] hub 4-0:1.0: USB hub found
Oct 24 16:24:09 localhost kernel: [17179578.100000] hub 4-0:1.0: 2 ports detected
Oct 24 16:24:09 localhost kernel: [17179578.204000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Oct 24 16:24:09 localhost kernel: [17179578.204000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 24 16:24:09 localhost kernel: [17179578.204000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Oct 24 16:24:09 localhost kernel: [17179578.204000] ehci_hcd 0000:00:1d.7: debug port 1
Oct 24 16:24:09 localhost kernel: [17179578.204000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2dffc00
Oct 24 16:24:09 localhost kernel: [17179578.208000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 24 16:24:09 localhost kernel: [17179578.208000] usb usb5: configuration #1 chosen from 1 choice
Oct 24 16:24:09 localhost kernel: [17179578.208000] hub 5-0:1.0: USB hub found
Oct 24 16:24:09 localhost kernel: [17179578.208000] hub 5-0:1.0: 8 ports detected
Oct 24 16:24:09 localhost kernel: [17179578.236000] usb 2-2: new full speed USB device using uhci_hcd and address 2
Oct 24 16:24:09 localhost kernel: [17179578.436000] kjournald starting.  Commit interval 5 seconds
Oct 24 16:24:09 localhost kernel: [17179578.436000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 24 16:24:09 localhost kernel: [17179578.740000] usb 2-2: new full speed USB device using uhci_hcd and address 3
Oct 24 16:24:09 localhost kernel: [17179578.932000] usb 2-2: configuration #1 chosen from 1 choice
Oct 24 16:24:09 localhost kernel: [17179587.844000] Floppy drive(s): fd0 is 1.44M
Oct 24 16:24:09 localhost kernel: [17179587.928000] Linux agpgart interface v0.101 (c) Dave Jones
Oct 24 16:24:09 localhost kernel: [17179587.932000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 24 16:24:09 localhost kernel: [17179587.964000] FDC 0 is a post-1991 82077
Oct 24 16:24:09 localhost kernel: [17179588.028000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 24 16:24:09 localhost kernel: [17179588.096000] agpgart: Detected an Intel 915G Chipset.
Oct 24 16:24:09 localhost kernel: [17179588.116000] agpgart: AGP aperture is 256M @ 0x0
Oct 24 16:24:09 localhost kernel: [17179588.180000] input: PC Speaker as /class/input/input1
Oct 24 16:24:09 localhost kernel: [17179588.352000] Real Time Clock Driver v1.12ac
Oct 24 16:24:09 localhost kernel: [17179588.660000] hw_random hardware driver 1.0.0 loaded
Oct 24 16:24:09 localhost kernel: [17179588.904000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0817
Oct 24 16:24:09 localhost kernel: [17179588.904000] usbcore: registered new driver usblp
Oct 24 16:24:09 localhost kernel: [17179588.904000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Oct 24 16:24:09 localhost kernel: [17179588.936000] parport: PnPBIOS parport detected.
Oct 24 16:24:09 localhost kernel: [17179588.936000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Oct 24 16:24:09 localhost kernel: [17179588.972000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 24 16:24:09 localhost kernel: [17179588.972000] sky2 v1.6.1 addr 0xd2efc000 irq 177 Yukon-EC (0xb6) rev 2
Oct 24 16:24:09 localhost kernel: [17179588.972000] sky2 eth0: addr 00:13:d4:7f:a5:05
Oct 24 16:24:09 localhost kernel: [17179589.004000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 24 16:24:09 localhost kernel: [17179589.168000] logips2pp: Detected unknown logitech mouse model 62
Oct 24 16:24:09 localhost kernel: [17179589.388000] nvidia: module license 'NVIDIA' taints kernel.
Oct 24 16:24:09 localhost kernel: [17179589.668000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 24 16:24:09 localhost kernel: [17179589.668000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9625  Thu Sep 14 15:33:21 PDT 2006
Oct 24 16:24:09 localhost kernel: [17179589.672000] sky2 eth0: enabling interface
Oct 24 16:24:09 localhost kernel: [17179589.700000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
Oct 24 16:24:09 localhost kernel: [17179589.736000] ts: Compaq touchscreen protocol output
Oct 24 16:24:09 localhost kernel: [17179589.916000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 24 16:24:09 localhost kernel: [17179590.040000] Intel ISA PCIC probe: not found.
Oct 24 16:24:09 localhost kernel: [17179590.108000] lp0: using parport0 (interrupt-driven).
Oct 24 16:24:09 localhost kernel: [17179590.176000] fuse init (API version 7.6)
Oct 24 16:24:09 localhost kernel: [17179590.216000] Adding 1461872k swap on /dev/sda7.  Priority:-1 extents:1 across:1461872k
Oct 24 16:24:09 localhost kernel: [17179590.284000] EXT3 FS on sda5, internal journal
Oct 24 16:24:09 localhost kernel: [17179590.380000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Oct 24 16:24:09 localhost kernel: [17179590.460000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 24 16:24:09 localhost kernel: [17179590.460000] md: bitmap version 4.39
Oct 24 16:24:09 localhost kernel: [17179591.360000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 24 16:24:09 localhost kernel: [17179591.508000] kjournald starting.  Commit interval 5 seconds
Oct 24 16:24:09 localhost kernel: [17179591.516000] EXT3 FS on sda6, internal journal
Oct 24 16:24:09 localhost kernel: [17179591.516000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 24 16:24:09 localhost kernel: [17179591.736000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Oct 24 16:24:09 localhost kernel: [17179591.928000] NET: Registered protocol family 10
Oct 24 16:24:09 localhost kernel: [17179591.928000] lo: Disabled Privacy Extensions
Oct 24 16:24:09 localhost kernel: [17179591.928000] IPv6 over IPv4 tunneling driver
Oct 24 16:24:09 localhost kernel: [17179592.804000] ACPI: Power Button (FF) [PWRF]
Oct 24 16:24:09 localhost kernel: [17179592.804000] ACPI: Power Button (CM) [PWRB]
Oct 24 16:24:09 localhost kernel: [17179592.912000] pcc_acpi: loading...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 23/10/2006, à 12:28

Petit pb de kernel depuis maj difficile vers edgy

#2 Le 23/10/2006, à 23:43

Re : Petit pb de kernel depuis maj difficile vers edgy

#3 Le 24/10/2006, à 00:08

Re : Petit pb de kernel depuis maj difficile vers edgy

#4 Le 24/10/2006, à 00:21

Re : Petit pb de kernel depuis maj difficile vers edgy

#5 Le 24/10/2006, à 00:22

Re : Petit pb de kernel depuis maj difficile vers edgy

#6 Le 24/10/2006, à 00:26

Re : Petit pb de kernel depuis maj difficile vers edgy

#7 Le 24/10/2006, à 00:33

Re : Petit pb de kernel depuis maj difficile vers edgy

#8 Le 24/10/2006, à 00:37

Re : Petit pb de kernel depuis maj difficile vers edgy

#9 Le 24/10/2006, à 00:56

Re : Petit pb de kernel depuis maj difficile vers edgy

#10 Le 24/10/2006, à 01:19

Re : Petit pb de kernel depuis maj difficile vers edgy

#11 Le 24/10/2006, à 01:27

Re : Petit pb de kernel depuis maj difficile vers edgy

#12 Le 24/10/2006, à 01:30

Re : Petit pb de kernel depuis maj difficile vers edgy

#13 Le 24/10/2006, à 01:31

Re : Petit pb de kernel depuis maj difficile vers edgy

#14 Le 24/10/2006, à 01:32

Re : Petit pb de kernel depuis maj difficile vers edgy

#15 Le 24/10/2006, à 01:32

Re : Petit pb de kernel depuis maj difficile vers edgy

#16 Le 24/10/2006, à 01:37

Re : Petit pb de kernel depuis maj difficile vers edgy

#17 Le 24/10/2006, à 12:44

Re : Petit pb de kernel depuis maj difficile vers edgy

#18 Le 24/10/2006, à 15:03

Re : Petit pb de kernel depuis maj difficile vers edgy

#19 Le 24/10/2006, à 15:38

Re : Petit pb de kernel depuis maj difficile vers edgy

#20 Le 24/10/2006, à 15:44

Re : Petit pb de kernel depuis maj difficile vers edgy

#21 Le 24/10/2006, à 15:56

Re : Petit pb de kernel depuis maj difficile vers edgy

#22 Le 24/10/2006, à 16:36

Re : Petit pb de kernel depuis maj difficile vers edgy

#23 Le 24/10/2006, à 16:57

Re : Petit pb de kernel depuis maj difficile vers edgy

Pied de page des forums